285 строки
6.2 KiB
C
285 строки
6.2 KiB
C
/*
|
|
* Wacom W8001 penabled serial touchscreen driver
|
|
*
|
|
* Copyright (c) 2008 Jaya Kumar
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
* more details.
|
|
*
|
|
* Layout based on Elo serial touchscreen driver by Vojtech Pavlik
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/input.h>
|
|
#include <linux/serio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ctype.h>
|
|
|
|
#define DRIVER_DESC "Wacom W8001 serial touchscreen driver"
|
|
|
|
MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>");
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define W8001_MAX_LENGTH 11
|
|
#define W8001_LEAD_MASK 0x80
|
|
#define W8001_LEAD_BYTE 0x80
|
|
#define W8001_TAB_MASK 0x40
|
|
#define W8001_TAB_BYTE 0x40
|
|
|
|
#define W8001_QUERY_PACKET 0x20
|
|
|
|
#define W8001_CMD_START '1'
|
|
#define W8001_CMD_QUERY '*'
|
|
|
|
struct w8001_coord {
|
|
u8 rdy;
|
|
u8 tsw;
|
|
u8 f1;
|
|
u8 f2;
|
|
u16 x;
|
|
u16 y;
|
|
u16 pen_pressure;
|
|
u8 tilt_x;
|
|
u8 tilt_y;
|
|
};
|
|
|
|
/*
|
|
* Per-touchscreen data.
|
|
*/
|
|
|
|
struct w8001 {
|
|
struct input_dev *dev;
|
|
struct serio *serio;
|
|
struct completion cmd_done;
|
|
int id;
|
|
int idx;
|
|
unsigned char response_type;
|
|
unsigned char response[W8001_MAX_LENGTH];
|
|
unsigned char data[W8001_MAX_LENGTH];
|
|
char phys[32];
|
|
};
|
|
|
|
static void parse_data(u8 *data, struct w8001_coord *coord)
|
|
{
|
|
memset(coord, 0, sizeof(*coord));
|
|
|
|
coord->rdy = data[0] & 0x20;
|
|
coord->tsw = data[0] & 0x01;
|
|
coord->f1 = data[0] & 0x02;
|
|
coord->f2 = data[0] & 0x04;
|
|
|
|
coord->x = (data[1] & 0x7F) << 9;
|
|
coord->x |= (data[2] & 0x7F) << 2;
|
|
coord->x |= (data[6] & 0x60) >> 5;
|
|
|
|
coord->y = (data[3] & 0x7F) << 9;
|
|
coord->y |= (data[4] & 0x7F) << 2;
|
|
coord->y |= (data[6] & 0x18) >> 3;
|
|
|
|
coord->pen_pressure = data[5] & 0x7F;
|
|
coord->pen_pressure |= (data[6] & 0x07) << 7 ;
|
|
|
|
coord->tilt_x = data[7] & 0x7F;
|
|
coord->tilt_y = data[8] & 0x7F;
|
|
}
|
|
|
|
static irqreturn_t w8001_interrupt(struct serio *serio,
|
|
unsigned char data, unsigned int flags)
|
|
{
|
|
struct w8001 *w8001 = serio_get_drvdata(serio);
|
|
struct input_dev *dev = w8001->dev;
|
|
struct w8001_coord coord;
|
|
unsigned char tmp;
|
|
|
|
w8001->data[w8001->idx] = data;
|
|
switch (w8001->idx++) {
|
|
case 0:
|
|
if ((data & W8001_LEAD_MASK) != W8001_LEAD_BYTE) {
|
|
pr_debug("w8001: unsynchronized data: 0x%02x\n", data);
|
|
w8001->idx = 0;
|
|
}
|
|
break;
|
|
|
|
case 8:
|
|
tmp = w8001->data[0] & W8001_TAB_MASK;
|
|
if (unlikely(tmp == W8001_TAB_BYTE))
|
|
break;
|
|
|
|
w8001->idx = 0;
|
|
parse_data(w8001->data, &coord);
|
|
input_report_abs(dev, ABS_X, coord.x);
|
|
input_report_abs(dev, ABS_Y, coord.y);
|
|
input_report_abs(dev, ABS_PRESSURE, coord.pen_pressure);
|
|
input_report_key(dev, BTN_TOUCH, coord.tsw);
|
|
input_sync(dev);
|
|
break;
|
|
|
|
case 10:
|
|
w8001->idx = 0;
|
|
memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH);
|
|
w8001->response_type = W8001_QUERY_PACKET;
|
|
complete(&w8001->cmd_done);
|
|
break;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int w8001_command(struct w8001 *w8001, unsigned char command,
|
|
bool wait_response)
|
|
{
|
|
int rc;
|
|
|
|
w8001->response_type = 0;
|
|
init_completion(&w8001->cmd_done);
|
|
|
|
rc = serio_write(w8001->serio, command);
|
|
if (rc == 0 && wait_response) {
|
|
|
|
wait_for_completion_timeout(&w8001->cmd_done, HZ);
|
|
if (w8001->response_type != W8001_QUERY_PACKET)
|
|
rc = -EIO;
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int w8001_setup(struct w8001 *w8001)
|
|
{
|
|
struct input_dev *dev = w8001->dev;
|
|
struct w8001_coord coord;
|
|
int error;
|
|
|
|
error = w8001_command(w8001, W8001_CMD_QUERY, true);
|
|
if (error)
|
|
return error;
|
|
|
|
parse_data(w8001->response, &coord);
|
|
|
|
input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
|
|
input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
|
|
input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
|
|
input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
|
|
input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
|
|
|
|
return w8001_command(w8001, W8001_CMD_START, false);
|
|
}
|
|
|
|
/*
|
|
* w8001_disconnect() is the opposite of w8001_connect()
|
|
*/
|
|
|
|
static void w8001_disconnect(struct serio *serio)
|
|
{
|
|
struct w8001 *w8001 = serio_get_drvdata(serio);
|
|
|
|
input_get_device(w8001->dev);
|
|
input_unregister_device(w8001->dev);
|
|
serio_close(serio);
|
|
serio_set_drvdata(serio, NULL);
|
|
input_put_device(w8001->dev);
|
|
kfree(w8001);
|
|
}
|
|
|
|
/*
|
|
* w8001_connect() is the routine that is called when someone adds a
|
|
* new serio device that supports the w8001 protocol and registers it as
|
|
* an input device.
|
|
*/
|
|
|
|
static int w8001_connect(struct serio *serio, struct serio_driver *drv)
|
|
{
|
|
struct w8001 *w8001;
|
|
struct input_dev *input_dev;
|
|
int err;
|
|
|
|
w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!w8001 || !input_dev) {
|
|
err = -ENOMEM;
|
|
goto fail1;
|
|
}
|
|
|
|
w8001->serio = serio;
|
|
w8001->id = serio->id.id;
|
|
w8001->dev = input_dev;
|
|
init_completion(&w8001->cmd_done);
|
|
snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
|
|
|
|
input_dev->name = "Wacom W8001 Penabled Serial TouchScreen";
|
|
input_dev->phys = w8001->phys;
|
|
input_dev->id.bustype = BUS_RS232;
|
|
input_dev->id.vendor = SERIO_W8001;
|
|
input_dev->id.product = w8001->id;
|
|
input_dev->id.version = 0x0100;
|
|
input_dev->dev.parent = &serio->dev;
|
|
|
|
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
|
|
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
|
|
|
|
serio_set_drvdata(serio, w8001);
|
|
err = serio_open(serio, drv);
|
|
if (err)
|
|
goto fail2;
|
|
|
|
err = w8001_setup(w8001);
|
|
if (err)
|
|
goto fail3;
|
|
|
|
err = input_register_device(w8001->dev);
|
|
if (err)
|
|
goto fail3;
|
|
|
|
return 0;
|
|
|
|
fail3:
|
|
serio_close(serio);
|
|
fail2:
|
|
serio_set_drvdata(serio, NULL);
|
|
fail1:
|
|
input_free_device(input_dev);
|
|
kfree(w8001);
|
|
return err;
|
|
}
|
|
|
|
static struct serio_device_id w8001_serio_ids[] = {
|
|
{
|
|
.type = SERIO_RS232,
|
|
.proto = SERIO_W8001,
|
|
.id = SERIO_ANY,
|
|
.extra = SERIO_ANY,
|
|
},
|
|
{ 0 }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(serio, w8001_serio_ids);
|
|
|
|
static struct serio_driver w8001_drv = {
|
|
.driver = {
|
|
.name = "w8001",
|
|
},
|
|
.description = DRIVER_DESC,
|
|
.id_table = w8001_serio_ids,
|
|
.interrupt = w8001_interrupt,
|
|
.connect = w8001_connect,
|
|
.disconnect = w8001_disconnect,
|
|
};
|
|
|
|
static int __init w8001_init(void)
|
|
{
|
|
return serio_register_driver(&w8001_drv);
|
|
}
|
|
|
|
static void __exit w8001_exit(void)
|
|
{
|
|
serio_unregister_driver(&w8001_drv);
|
|
}
|
|
|
|
module_init(w8001_init);
|
|
module_exit(w8001_exit);
|