490 строки
15 KiB
C
490 строки
15 KiB
C
/*
|
|
* AppliedMicro X-Gene SoC SATA Host Controller Driver
|
|
*
|
|
* Copyright (c) 2014, Applied Micro Circuits Corporation
|
|
* Author: Loc Ho <lho@apm.com>
|
|
* Tuan Phan <tphan@apm.com>
|
|
* Suman Tripathi <stripathi@apm.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
* NOTE: PM support is not currently available.
|
|
*
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ahci_platform.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/phy/phy.h>
|
|
#include "ahci.h"
|
|
|
|
/* Max # of disk per a controller */
|
|
#define MAX_AHCI_CHN_PERCTR 2
|
|
|
|
/* MUX CSR */
|
|
#define SATA_ENET_CONFIG_REG 0x00000000
|
|
#define CFG_SATA_ENET_SELECT_MASK 0x00000001
|
|
|
|
/* SATA core host controller CSR */
|
|
#define SLVRDERRATTRIBUTES 0x00000000
|
|
#define SLVWRERRATTRIBUTES 0x00000004
|
|
#define MSTRDERRATTRIBUTES 0x00000008
|
|
#define MSTWRERRATTRIBUTES 0x0000000c
|
|
#define BUSCTLREG 0x00000014
|
|
#define IOFMSTRWAUX 0x00000018
|
|
#define INTSTATUSMASK 0x0000002c
|
|
#define ERRINTSTATUS 0x00000030
|
|
#define ERRINTSTATUSMASK 0x00000034
|
|
|
|
/* SATA host AHCI CSR */
|
|
#define PORTCFG 0x000000a4
|
|
#define PORTADDR_SET(dst, src) \
|
|
(((dst) & ~0x0000003f) | (((u32)(src)) & 0x0000003f))
|
|
#define PORTPHY1CFG 0x000000a8
|
|
#define PORTPHY1CFG_FRCPHYRDY_SET(dst, src) \
|
|
(((dst) & ~0x00100000) | (((u32)(src) << 0x14) & 0x00100000))
|
|
#define PORTPHY2CFG 0x000000ac
|
|
#define PORTPHY3CFG 0x000000b0
|
|
#define PORTPHY4CFG 0x000000b4
|
|
#define PORTPHY5CFG 0x000000b8
|
|
#define SCTL0 0x0000012C
|
|
#define PORTPHY5CFG_RTCHG_SET(dst, src) \
|
|
(((dst) & ~0xfff00000) | (((u32)(src) << 0x14) & 0xfff00000))
|
|
#define PORTAXICFG_EN_CONTEXT_SET(dst, src) \
|
|
(((dst) & ~0x01000000) | (((u32)(src) << 0x18) & 0x01000000))
|
|
#define PORTAXICFG 0x000000bc
|
|
#define PORTAXICFG_OUTTRANS_SET(dst, src) \
|
|
(((dst) & ~0x00f00000) | (((u32)(src) << 0x14) & 0x00f00000))
|
|
|
|
/* SATA host controller AXI CSR */
|
|
#define INT_SLV_TMOMASK 0x00000010
|
|
|
|
/* SATA diagnostic CSR */
|
|
#define CFG_MEM_RAM_SHUTDOWN 0x00000070
|
|
#define BLOCK_MEM_RDY 0x00000074
|
|
|
|
struct xgene_ahci_context {
|
|
struct ahci_host_priv *hpriv;
|
|
struct device *dev;
|
|
void __iomem *csr_core; /* Core CSR address of IP */
|
|
void __iomem *csr_diag; /* Diag CSR address of IP */
|
|
void __iomem *csr_axi; /* AXI CSR address of IP */
|
|
void __iomem *csr_mux; /* MUX CSR address of IP */
|
|
};
|
|
|
|
static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx)
|
|
{
|
|
dev_dbg(ctx->dev, "Release memory from shutdown\n");
|
|
writel(0x0, ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN);
|
|
readl(ctx->csr_diag + CFG_MEM_RAM_SHUTDOWN); /* Force a barrier */
|
|
msleep(1); /* reset may take up to 1ms */
|
|
if (readl(ctx->csr_diag + BLOCK_MEM_RDY) != 0xFFFFFFFF) {
|
|
dev_err(ctx->dev, "failed to release memory from shutdown\n");
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* xgene_ahci_read_id - Read ID data from the specified device
|
|
* @dev: device
|
|
* @tf: proposed taskfile
|
|
* @id: data buffer
|
|
*
|
|
* This custom read ID function is required due to the fact that the HW
|
|
* does not support DEVSLP and the controller state machine may get stuck
|
|
* after processing the ID query command.
|
|
*/
|
|
static unsigned int xgene_ahci_read_id(struct ata_device *dev,
|
|
struct ata_taskfile *tf, u16 *id)
|
|
{
|
|
u32 err_mask;
|
|
void __iomem *port_mmio = ahci_port_base(dev->link->ap);
|
|
|
|
err_mask = ata_do_dev_read_id(dev, tf, id);
|
|
if (err_mask)
|
|
return err_mask;
|
|
|
|
/*
|
|
* Mask reserved area. Word78 spec of Link Power Management
|
|
* bit15-8: reserved
|
|
* bit7: NCQ autosence
|
|
* bit6: Software settings preservation supported
|
|
* bit5: reserved
|
|
* bit4: In-order sata delivery supported
|
|
* bit3: DIPM requests supported
|
|
* bit2: DMA Setup FIS Auto-Activate optimization supported
|
|
* bit1: DMA Setup FIX non-Zero buffer offsets supported
|
|
* bit0: Reserved
|
|
*
|
|
* Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP
|
|
*/
|
|
id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8);
|
|
|
|
/*
|
|
* Due to HW errata, restart the port if no other command active.
|
|
* Otherwise the controller may get stuck.
|
|
*/
|
|
if (!readl(port_mmio + PORT_CMD_ISSUE)) {
|
|
writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD);
|
|
readl(port_mmio + PORT_CMD); /* Force a barrier */
|
|
writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD);
|
|
readl(port_mmio + PORT_CMD); /* Force a barrier */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void xgene_ahci_set_phy_cfg(struct xgene_ahci_context *ctx, int channel)
|
|
{
|
|
void __iomem *mmio = ctx->hpriv->mmio;
|
|
u32 val;
|
|
|
|
dev_dbg(ctx->dev, "port configure mmio 0x%p channel %d\n",
|
|
mmio, channel);
|
|
val = readl(mmio + PORTCFG);
|
|
val = PORTADDR_SET(val, channel == 0 ? 2 : 3);
|
|
writel(val, mmio + PORTCFG);
|
|
readl(mmio + PORTCFG); /* Force a barrier */
|
|
/* Disable fix rate */
|
|
writel(0x0001fffe, mmio + PORTPHY1CFG);
|
|
readl(mmio + PORTPHY1CFG); /* Force a barrier */
|
|
writel(0x5018461c, mmio + PORTPHY2CFG);
|
|
readl(mmio + PORTPHY2CFG); /* Force a barrier */
|
|
writel(0x1c081907, mmio + PORTPHY3CFG);
|
|
readl(mmio + PORTPHY3CFG); /* Force a barrier */
|
|
writel(0x1c080815, mmio + PORTPHY4CFG);
|
|
readl(mmio + PORTPHY4CFG); /* Force a barrier */
|
|
/* Set window negotiation */
|
|
val = readl(mmio + PORTPHY5CFG);
|
|
val = PORTPHY5CFG_RTCHG_SET(val, 0x300);
|
|
writel(val, mmio + PORTPHY5CFG);
|
|
readl(mmio + PORTPHY5CFG); /* Force a barrier */
|
|
val = readl(mmio + PORTAXICFG);
|
|
val = PORTAXICFG_EN_CONTEXT_SET(val, 0x1); /* Enable context mgmt */
|
|
val = PORTAXICFG_OUTTRANS_SET(val, 0xe); /* Set outstanding */
|
|
writel(val, mmio + PORTAXICFG);
|
|
readl(mmio + PORTAXICFG); /* Force a barrier */
|
|
}
|
|
|
|
/**
|
|
* xgene_ahci_do_hardreset - Issue the actual COMRESET
|
|
* @link: link to reset
|
|
* @deadline: deadline jiffies for the operation
|
|
* @online: Return value to indicate if device online
|
|
*
|
|
* Due to the limitation of the hardware PHY, a difference set of setting is
|
|
* required for each supported disk speed - Gen3 (6.0Gbps), Gen2 (3.0Gbps),
|
|
* and Gen1 (1.5Gbps). Otherwise during long IO stress test, the PHY will
|
|
* report disparity error and etc. In addition, during COMRESET, there can
|
|
* be error reported in the register PORT_SCR_ERR. For SERR_DISPARITY and
|
|
* SERR_10B_8B_ERR, the PHY receiver line must be reseted. The following
|
|
* algorithm is followed to proper configure the hardware PHY during COMRESET:
|
|
*
|
|
* Alg Part 1:
|
|
* 1. Start the PHY at Gen3 speed (default setting)
|
|
* 2. Issue the COMRESET
|
|
* 3. If no link, go to Alg Part 3
|
|
* 4. If link up, determine if the negotiated speed matches the PHY
|
|
* configured speed
|
|
* 5. If they matched, go to Alg Part 2
|
|
* 6. If they do not matched and first time, configure the PHY for the linked
|
|
* up disk speed and repeat step 2
|
|
* 7. Go to Alg Part 2
|
|
*
|
|
* Alg Part 2:
|
|
* 1. On link up, if there are any SERR_DISPARITY and SERR_10B_8B_ERR error
|
|
* reported in the register PORT_SCR_ERR, then reset the PHY receiver line
|
|
* 2. Go to Alg Part 3
|
|
*
|
|
* Alg Part 3:
|
|
* 1. Clear any pending from register PORT_SCR_ERR.
|
|
*
|
|
* NOTE: For the initial version, we will NOT support Gen1/Gen2. In addition
|
|
* and until the underlying PHY supports an method to reset the receiver
|
|
* line, on detection of SERR_DISPARITY or SERR_10B_8B_ERR errors,
|
|
* an warning message will be printed.
|
|
*/
|
|
static int xgene_ahci_do_hardreset(struct ata_link *link,
|
|
unsigned long deadline, bool *online)
|
|
{
|
|
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct xgene_ahci_context *ctx = hpriv->plat_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ata_taskfile tf;
|
|
int rc;
|
|
u32 val;
|
|
|
|
/* clear D2H reception area to properly wait for D2H FIS */
|
|
ata_tf_init(link->device, &tf);
|
|
tf.command = ATA_BUSY;
|
|
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
|
|
rc = sata_link_hardreset(link, timing, deadline, online,
|
|
ahci_check_ready);
|
|
|
|
val = readl(port_mmio + PORT_SCR_ERR);
|
|
if (val & (SERR_DISPARITY | SERR_10B_8B_ERR))
|
|
dev_warn(ctx->dev, "link has error\n");
|
|
|
|
/* clear all errors if any pending */
|
|
val = readl(port_mmio + PORT_SCR_ERR);
|
|
writel(val, port_mmio + PORT_SCR_ERR);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int xgene_ahci_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
bool online;
|
|
int rc;
|
|
u32 portcmd_saved;
|
|
u32 portclb_saved;
|
|
u32 portclbhi_saved;
|
|
u32 portrxfis_saved;
|
|
u32 portrxfishi_saved;
|
|
|
|
/* As hardreset resets these CSR, save it to restore later */
|
|
portcmd_saved = readl(port_mmio + PORT_CMD);
|
|
portclb_saved = readl(port_mmio + PORT_LST_ADDR);
|
|
portclbhi_saved = readl(port_mmio + PORT_LST_ADDR_HI);
|
|
portrxfis_saved = readl(port_mmio + PORT_FIS_ADDR);
|
|
portrxfishi_saved = readl(port_mmio + PORT_FIS_ADDR_HI);
|
|
|
|
ahci_stop_engine(ap);
|
|
|
|
rc = xgene_ahci_do_hardreset(link, deadline, &online);
|
|
|
|
/* As controller hardreset clears them, restore them */
|
|
writel(portcmd_saved, port_mmio + PORT_CMD);
|
|
writel(portclb_saved, port_mmio + PORT_LST_ADDR);
|
|
writel(portclbhi_saved, port_mmio + PORT_LST_ADDR_HI);
|
|
writel(portrxfis_saved, port_mmio + PORT_FIS_ADDR);
|
|
writel(portrxfishi_saved, port_mmio + PORT_FIS_ADDR_HI);
|
|
|
|
hpriv->start_engine(ap);
|
|
|
|
if (online)
|
|
*class = ahci_dev_classify(ap);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void xgene_ahci_host_stop(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
|
|
ahci_platform_disable_resources(hpriv);
|
|
}
|
|
|
|
static struct ata_port_operations xgene_ahci_ops = {
|
|
.inherits = &ahci_ops,
|
|
.host_stop = xgene_ahci_host_stop,
|
|
.hardreset = xgene_ahci_hardreset,
|
|
.read_id = xgene_ahci_read_id,
|
|
};
|
|
|
|
static const struct ata_port_info xgene_ahci_port_info = {
|
|
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NCQ,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &xgene_ahci_ops,
|
|
};
|
|
|
|
static int xgene_ahci_hw_init(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct xgene_ahci_context *ctx = hpriv->plat_data;
|
|
int i;
|
|
int rc;
|
|
u32 val;
|
|
|
|
/* Remove IP RAM out of shutdown */
|
|
rc = xgene_ahci_init_memram(ctx);
|
|
if (rc)
|
|
return rc;
|
|
|
|
for (i = 0; i < MAX_AHCI_CHN_PERCTR; i++)
|
|
xgene_ahci_set_phy_cfg(ctx, i);
|
|
|
|
/* AXI disable Mask */
|
|
writel(0xffffffff, hpriv->mmio + HOST_IRQ_STAT);
|
|
readl(hpriv->mmio + HOST_IRQ_STAT); /* Force a barrier */
|
|
writel(0, ctx->csr_core + INTSTATUSMASK);
|
|
val = readl(ctx->csr_core + INTSTATUSMASK); /* Force a barrier */
|
|
dev_dbg(ctx->dev, "top level interrupt mask 0x%X value 0x%08X\n",
|
|
INTSTATUSMASK, val);
|
|
|
|
writel(0x0, ctx->csr_core + ERRINTSTATUSMASK);
|
|
readl(ctx->csr_core + ERRINTSTATUSMASK); /* Force a barrier */
|
|
writel(0x0, ctx->csr_axi + INT_SLV_TMOMASK);
|
|
readl(ctx->csr_axi + INT_SLV_TMOMASK);
|
|
|
|
/* Enable AXI Interrupt */
|
|
writel(0xffffffff, ctx->csr_core + SLVRDERRATTRIBUTES);
|
|
writel(0xffffffff, ctx->csr_core + SLVWRERRATTRIBUTES);
|
|
writel(0xffffffff, ctx->csr_core + MSTRDERRATTRIBUTES);
|
|
writel(0xffffffff, ctx->csr_core + MSTWRERRATTRIBUTES);
|
|
|
|
/* Enable coherency */
|
|
val = readl(ctx->csr_core + BUSCTLREG);
|
|
val &= ~0x00000002; /* Enable write coherency */
|
|
val &= ~0x00000001; /* Enable read coherency */
|
|
writel(val, ctx->csr_core + BUSCTLREG);
|
|
|
|
val = readl(ctx->csr_core + IOFMSTRWAUX);
|
|
val |= (1 << 3); /* Enable read coherency */
|
|
val |= (1 << 9); /* Enable write coherency */
|
|
writel(val, ctx->csr_core + IOFMSTRWAUX);
|
|
val = readl(ctx->csr_core + IOFMSTRWAUX);
|
|
dev_dbg(ctx->dev, "coherency 0x%X value 0x%08X\n",
|
|
IOFMSTRWAUX, val);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx)
|
|
{
|
|
u32 val;
|
|
|
|
/* Check for optional MUX resource */
|
|
if (IS_ERR(ctx->csr_mux))
|
|
return 0;
|
|
|
|
val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG);
|
|
val &= ~CFG_SATA_ENET_SELECT_MASK;
|
|
writel(val, ctx->csr_mux + SATA_ENET_CONFIG_REG);
|
|
val = readl(ctx->csr_mux + SATA_ENET_CONFIG_REG);
|
|
return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0;
|
|
}
|
|
|
|
static int xgene_ahci_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct ahci_host_priv *hpriv;
|
|
struct xgene_ahci_context *ctx;
|
|
struct resource *res;
|
|
unsigned long hflags;
|
|
int rc;
|
|
|
|
hpriv = ahci_platform_get_resources(pdev);
|
|
if (IS_ERR(hpriv))
|
|
return PTR_ERR(hpriv);
|
|
|
|
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
|
|
if (!ctx)
|
|
return -ENOMEM;
|
|
|
|
hpriv->plat_data = ctx;
|
|
ctx->hpriv = hpriv;
|
|
ctx->dev = dev;
|
|
|
|
/* Retrieve the IP core resource */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
ctx->csr_core = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(ctx->csr_core))
|
|
return PTR_ERR(ctx->csr_core);
|
|
|
|
/* Retrieve the IP diagnostic resource */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
|
|
ctx->csr_diag = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(ctx->csr_diag))
|
|
return PTR_ERR(ctx->csr_diag);
|
|
|
|
/* Retrieve the IP AXI resource */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
|
|
ctx->csr_axi = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(ctx->csr_axi))
|
|
return PTR_ERR(ctx->csr_axi);
|
|
|
|
/* Retrieve the optional IP mux resource */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 4);
|
|
ctx->csr_mux = devm_ioremap_resource(dev, res);
|
|
|
|
dev_dbg(dev, "VAddr 0x%p Mmio VAddr 0x%p\n", ctx->csr_core,
|
|
hpriv->mmio);
|
|
|
|
/* Select ATA */
|
|
if ((rc = xgene_ahci_mux_select(ctx))) {
|
|
dev_err(dev, "SATA mux selection failed error %d\n", rc);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Due to errata, HW requires full toggle transition */
|
|
rc = ahci_platform_enable_clks(hpriv);
|
|
if (rc)
|
|
goto disable_resources;
|
|
ahci_platform_disable_clks(hpriv);
|
|
|
|
rc = ahci_platform_enable_resources(hpriv);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
/* Configure the host controller */
|
|
xgene_ahci_hw_init(hpriv);
|
|
|
|
/*
|
|
* Setup DMA mask. This is preliminary until the DMA range is sorted
|
|
* out.
|
|
*/
|
|
rc = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
|
|
if (rc) {
|
|
dev_err(dev, "Unable to set dma mask\n");
|
|
goto disable_resources;
|
|
}
|
|
|
|
hflags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_YES_NCQ;
|
|
|
|
rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info,
|
|
hflags, 0, 0);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
dev_dbg(dev, "X-Gene SATA host controller initialized\n");
|
|
return 0;
|
|
|
|
disable_resources:
|
|
ahci_platform_disable_resources(hpriv);
|
|
return rc;
|
|
}
|
|
|
|
static const struct of_device_id xgene_ahci_of_match[] = {
|
|
{.compatible = "apm,xgene-ahci"},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, xgene_ahci_of_match);
|
|
|
|
static struct platform_driver xgene_ahci_driver = {
|
|
.probe = xgene_ahci_probe,
|
|
.remove = ata_platform_remove_one,
|
|
.driver = {
|
|
.name = "xgene-ahci",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = xgene_ahci_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(xgene_ahci_driver);
|
|
|
|
MODULE_DESCRIPTION("APM X-Gene AHCI SATA driver");
|
|
MODULE_AUTHOR("Loc Ho <lho@apm.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION("0.4");
|