microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/hwmon/aquacomputer_d5next.c

1509 строки
40 KiB
C
Исходник Ответственный История

// SPDX-License-Identifier: GPL-2.0+
/*
* hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo,
* Quadro, High Flow Next, Aquaero, Aquastream Ultimate)
*
* Aquacomputer devices send HID reports (with ID 0x01) every second to report
* sensor values, except for devices that communicate through the
* legacy way (currently, Poweradjust 3).
*
* Copyright 2021 Aleksa Savic <savicaleksa83@gmail.com>
* Copyright 2022 Jack Doan <me@jackdoan.com>
*/
#include <linux/crc16.h>
#include <linux/debugfs.h>
#include <linux/hid.h>
#include <linux/hwmon.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/seq_file.h>
#include <asm/unaligned.h>
#define USB_VENDOR_ID_AQUACOMPUTER 0x0c70
#define USB_PRODUCT_ID_AQUAERO 0xf001
#define USB_PRODUCT_ID_FARBWERK 0xf00a
#define USB_PRODUCT_ID_QUADRO 0xf00d
#define USB_PRODUCT_ID_D5NEXT 0xf00e
#define USB_PRODUCT_ID_FARBWERK360 0xf010
#define USB_PRODUCT_ID_OCTO 0xf011
#define USB_PRODUCT_ID_HIGHFLOWNEXT 0xf012
#define USB_PRODUCT_ID_AQUASTREAMULT 0xf00b
#define USB_PRODUCT_ID_POWERADJUST3 0xf0bd
enum kinds {
d5next, farbwerk, farbwerk360, octo, quadro,
highflownext, aquaero, poweradjust3, aquastreamult
};
static const char *const aqc_device_names[] = {
[d5next] = "d5next",
[farbwerk] = "farbwerk",
[farbwerk360] = "farbwerk360",
[octo] = "octo",
[quadro] = "quadro",
[highflownext] = "highflownext",
[aquaero] = "aquaero",
[aquastreamult] = "aquastreamultimate",
[poweradjust3] = "poweradjust3"
};
#define DRIVER_NAME "aquacomputer_d5next"
#define STATUS_REPORT_ID 0x01
#define STATUS_UPDATE_INTERVAL (2 * HZ) /* In seconds */
#define SERIAL_PART_OFFSET 2
#define CTRL_REPORT_ID 0x03
/* The HID report that the official software always sends
* after writing values, currently same for all devices
*/
#define SECONDARY_CTRL_REPORT_ID 0x02
#define SECONDARY_CTRL_REPORT_SIZE 0x0B
static u8 secondary_ctrl_report[] = {
0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x34, 0xC6
};
/* Report IDs for legacy devices */
#define POWERADJUST3_STATUS_REPORT_ID 0x03
/* Info, sensor sizes and offsets for most Aquacomputer devices */
#define AQC_SERIAL_START 0x3
#define AQC_FIRMWARE_VERSION 0xD
#define AQC_SENSOR_SIZE 0x02
#define AQC_TEMP_SENSOR_DISCONNECTED 0x7FFF
#define AQC_FAN_PERCENT_OFFSET 0x00
#define AQC_FAN_VOLTAGE_OFFSET 0x02
#define AQC_FAN_CURRENT_OFFSET 0x04
#define AQC_FAN_POWER_OFFSET 0x06
#define AQC_FAN_SPEED_OFFSET 0x08
/* Specs of the Aquaero fan controllers */
#define AQUAERO_SERIAL_START 0x07
#define AQUAERO_FIRMWARE_VERSION 0x0B
#define AQUAERO_NUM_FANS 4
#define AQUAERO_NUM_SENSORS 8
#define AQUAERO_NUM_VIRTUAL_SENSORS 8
#define AQUAERO_NUM_CALC_VIRTUAL_SENSORS 4
#define AQUAERO_NUM_FLOW_SENSORS 2
/* Sensor report offsets for Aquaero fan controllers */
#define AQUAERO_SENSOR_START 0x65
#define AQUAERO_VIRTUAL_SENSOR_START 0x85
#define AQUAERO_CALC_VIRTUAL_SENSOR_START 0x95
#define AQUAERO_FLOW_SENSORS_START 0xF9
#define AQUAERO_FAN_VOLTAGE_OFFSET 0x04
#define AQUAERO_FAN_CURRENT_OFFSET 0x06
#define AQUAERO_FAN_POWER_OFFSET 0x08
#define AQUAERO_FAN_SPEED_OFFSET 0x00
static u16 aquaero_sensor_fan_offsets[] = { 0x167, 0x173, 0x17f, 0x18B };
/* Specs of the D5 Next pump */
#define D5NEXT_NUM_FANS 2
#define D5NEXT_NUM_SENSORS 1
#define D5NEXT_NUM_VIRTUAL_SENSORS 8
#define D5NEXT_CTRL_REPORT_SIZE 0x329
/* Sensor report offsets for the D5 Next pump */
#define D5NEXT_POWER_CYCLES 0x18
#define D5NEXT_COOLANT_TEMP 0x57
#define D5NEXT_PUMP_OFFSET 0x6c
#define D5NEXT_FAN_OFFSET 0x5f
#define D5NEXT_5V_VOLTAGE 0x39
#define D5NEXT_12V_VOLTAGE 0x37
#define D5NEXT_VIRTUAL_SENSORS_START 0x3f
static u16 d5next_sensor_fan_offsets[] = { D5NEXT_PUMP_OFFSET, D5NEXT_FAN_OFFSET };
/* Control report offsets for the D5 Next pump */
#define D5NEXT_TEMP_CTRL_OFFSET 0x2D /* Temperature sensor offsets location */
static u16 d5next_ctrl_fan_offsets[] = { 0x97, 0x42 }; /* Pump and fan speed (from 0-100%) */
/* Specs of the Aquastream Ultimate pump */
/* Pump does not follow the standard structure, so only consider the fan */
#define AQUASTREAMULT_NUM_FANS 1
#define AQUASTREAMULT_NUM_SENSORS 2
/* Sensor report offsets for the Aquastream Ultimate pump */
#define AQUASTREAMULT_SENSOR_START 0x2D
#define AQUASTREAMULT_PUMP_OFFSET 0x51
#define AQUASTREAMULT_PUMP_VOLTAGE 0x3D
#define AQUASTREAMULT_PUMP_CURRENT 0x53
#define AQUASTREAMULT_PUMP_POWER 0x55
#define AQUASTREAMULT_FAN_OFFSET 0x41
#define AQUASTREAMULT_PRESSURE_OFFSET 0x57
#define AQUASTREAMULT_FLOW_SENSOR_OFFSET 0x37
#define AQUASTREAMULT_FAN_VOLTAGE_OFFSET 0x02
#define AQUASTREAMULT_FAN_CURRENT_OFFSET 0x00
#define AQUASTREAMULT_FAN_POWER_OFFSET 0x04
#define AQUASTREAMULT_FAN_SPEED_OFFSET 0x06
static u16 aquastreamult_sensor_fan_offsets[] = { AQUASTREAMULT_FAN_OFFSET };
/* Spec and sensor report offset for the Farbwerk RGB controller */
#define FARBWERK_NUM_SENSORS 4
#define FARBWERK_SENSOR_START 0x2f
/* Specs of the Farbwerk 360 RGB controller */
#define FARBWERK360_NUM_SENSORS 4
#define FARBWERK360_NUM_VIRTUAL_SENSORS 16
#define FARBWERK360_CTRL_REPORT_SIZE 0x682
/* Sensor report offsets for the Farbwerk 360 */
#define FARBWERK360_SENSOR_START 0x32
#define FARBWERK360_VIRTUAL_SENSORS_START 0x3a
/* Control report offsets for the Farbwerk 360 */
#define FARBWERK360_TEMP_CTRL_OFFSET 0x8
/* Specs of the Octo fan controller */
#define OCTO_NUM_FANS 8
#define OCTO_NUM_SENSORS 4
#define OCTO_NUM_VIRTUAL_SENSORS 16
#define OCTO_CTRL_REPORT_SIZE 0x65F
/* Sensor report offsets for the Octo */
#define OCTO_POWER_CYCLES 0x18
#define OCTO_SENSOR_START 0x3D
#define OCTO_VIRTUAL_SENSORS_START 0x45
static u16 octo_sensor_fan_offsets[] = { 0x7D, 0x8A, 0x97, 0xA4, 0xB1, 0xBE, 0xCB, 0xD8 };
/* Control report offsets for the Octo */
#define OCTO_TEMP_CTRL_OFFSET 0xA
/* Fan speed offsets (0-100%) */
static u16 octo_ctrl_fan_offsets[] = { 0x5B, 0xB0, 0x105, 0x15A, 0x1AF, 0x204, 0x259, 0x2AE };
/* Specs of Quadro fan controller */
#define QUADRO_NUM_FANS 4
#define QUADRO_NUM_SENSORS 4
#define QUADRO_NUM_VIRTUAL_SENSORS 16
#define QUADRO_NUM_FLOW_SENSORS 1
#define QUADRO_CTRL_REPORT_SIZE 0x3c1
/* Sensor report offsets for the Quadro */
#define QUADRO_POWER_CYCLES 0x18
#define QUADRO_SENSOR_START 0x34
#define QUADRO_VIRTUAL_SENSORS_START 0x3c
#define QUADRO_FLOW_SENSOR_OFFSET 0x6e
static u16 quadro_sensor_fan_offsets[] = { 0x70, 0x7D, 0x8A, 0x97 };
/* Control report offsets for the Quadro */
#define QUADRO_TEMP_CTRL_OFFSET 0xA
#define QUADRO_FLOW_PULSES_CTRL_OFFSET 0x6
static u16 quadro_ctrl_fan_offsets[] = { 0x37, 0x8c, 0xe1, 0x136 }; /* Fan speed offsets (0-100%) */
/* Specs of High Flow Next flow sensor */
#define HIGHFLOWNEXT_NUM_SENSORS 2
#define HIGHFLOWNEXT_NUM_FLOW_SENSORS 1
/* Sensor report offsets for the High Flow Next */
#define HIGHFLOWNEXT_SENSOR_START 85
#define HIGHFLOWNEXT_FLOW 81
#define HIGHFLOWNEXT_WATER_QUALITY 89
#define HIGHFLOWNEXT_POWER 91
#define HIGHFLOWNEXT_CONDUCTIVITY 95
#define HIGHFLOWNEXT_5V_VOLTAGE 97
#define HIGHFLOWNEXT_5V_VOLTAGE_USB 99
/* Specs of the Poweradjust 3 */
#define POWERADJUST3_NUM_SENSORS 1
#define POWERADJUST3_SENSOR_REPORT_SIZE 0x32
/* Sensor report offsets for the Poweradjust 3 */
#define POWERADJUST3_SENSOR_START 0x03
/* Labels for D5 Next */
static const char *const label_d5next_temp[] = {
"Coolant temp"
};
static const char *const label_d5next_speeds[] = {
"Pump speed",
"Fan speed"
};
static const char *const label_d5next_power[] = {
"Pump power",
"Fan power"
};
static const char *const label_d5next_voltages[] = {
"Pump voltage",
"Fan voltage",
"+5V voltage",
"+12V voltage"
};
static const char *const label_d5next_current[] = {
"Pump current",
"Fan current"
};
/* Labels for Aquaero, Farbwerk, Farbwerk 360 and Octo and Quadro temperature sensors */
static const char *const label_temp_sensors[] = {
"Sensor 1",
"Sensor 2",
"Sensor 3",
"Sensor 4",
"Sensor 5",
"Sensor 6",
"Sensor 7",
"Sensor 8"
};
static const char *const label_virtual_temp_sensors[] = {
"Virtual sensor 1",
"Virtual sensor 2",
"Virtual sensor 3",
"Virtual sensor 4",
"Virtual sensor 5",
"Virtual sensor 6",
"Virtual sensor 7",
"Virtual sensor 8",
"Virtual sensor 9",
"Virtual sensor 10",
"Virtual sensor 11",
"Virtual sensor 12",
"Virtual sensor 13",
"Virtual sensor 14",
"Virtual sensor 15",
"Virtual sensor 16",
};
static const char *const label_aquaero_calc_temp_sensors[] = {
"Calc. virtual sensor 1",
"Calc. virtual sensor 2",
"Calc. virtual sensor 3",
"Calc. virtual sensor 4"
};
/* Labels for Octo and Quadro (except speed) */
static const char *const label_fan_speed[] = {
"Fan 1 speed",
"Fan 2 speed",
"Fan 3 speed",
"Fan 4 speed",
"Fan 5 speed",
"Fan 6 speed",
"Fan 7 speed",
"Fan 8 speed"
};
static const char *const label_fan_power[] = {
"Fan 1 power",
"Fan 2 power",
"Fan 3 power",
"Fan 4 power",
"Fan 5 power",
"Fan 6 power",
"Fan 7 power",
"Fan 8 power"
};
static const char *const label_fan_voltage[] = {
"Fan 1 voltage",
"Fan 2 voltage",
"Fan 3 voltage",
"Fan 4 voltage",
"Fan 5 voltage",
"Fan 6 voltage",
"Fan 7 voltage",
"Fan 8 voltage"
};
static const char *const label_fan_current[] = {
"Fan 1 current",
"Fan 2 current",
"Fan 3 current",
"Fan 4 current",
"Fan 5 current",
"Fan 6 current",
"Fan 7 current",
"Fan 8 current"
};
/* Labels for Quadro fan speeds */
static const char *const label_quadro_speeds[] = {
"Fan 1 speed",
"Fan 2 speed",
"Fan 3 speed",
"Fan 4 speed",
"Flow speed [dL/h]"
};
/* Labels for Aquaero fan speeds */
static const char *const label_aquaero_speeds[] = {
"Fan 1 speed",
"Fan 2 speed",
"Fan 3 speed",
"Fan 4 speed",
"Flow sensor 1 [dL/h]",
"Flow sensor 2 [dL/h]"
};
/* Labels for High Flow Next */
static const char *const label_highflownext_temp_sensors[] = {
"Coolant temp",
"External sensor"
};
static const char *const label_highflownext_fan_speed[] = {
"Flow [dL/h]",
"Water quality [%]",
"Conductivity [nS/cm]",
};
static const char *const label_highflownext_power[] = {
"Dissipated power",
};
static const char *const label_highflownext_voltage[] = {
"+5V voltage",
"+5V USB voltage"
};
/* Labels for Aquastream Ultimate */
static const char *const label_aquastreamult_temp[] = {
"Coolant temp",
"External temp"
};
static const char *const label_aquastreamult_speeds[] = {
"Fan speed",
"Pump speed",
"Pressure [mbar]",
"Flow speed [dL/h]"
};
static const char *const label_aquastreamult_power[] = {
"Fan power",
"Pump power"
};
static const char *const label_aquastreamult_voltages[] = {
"Fan voltage",
"Pump voltage"
};
static const char *const label_aquastreamult_current[] = {
"Fan current",
"Pump current"
};
/* Labels for Poweradjust 3 */
static const char *const label_poweradjust3_temp_sensors[] = {
"External sensor"
};
struct aqc_fan_structure_offsets {
u8 voltage;
u8 curr;
u8 power;
u8 speed;
};
/* Fan structure offsets for Aquaero */
static struct aqc_fan_structure_offsets aqc_aquaero_fan_structure = {
.voltage = AQUAERO_FAN_VOLTAGE_OFFSET,
.curr = AQUAERO_FAN_CURRENT_OFFSET,
.power = AQUAERO_FAN_POWER_OFFSET,
.speed = AQUAERO_FAN_SPEED_OFFSET
};
/* Fan structure offsets for Aquastream Ultimate */
static struct aqc_fan_structure_offsets aqc_aquastreamult_fan_structure = {
.voltage = AQUASTREAMULT_FAN_VOLTAGE_OFFSET,
.curr = AQUASTREAMULT_FAN_CURRENT_OFFSET,
.power = AQUASTREAMULT_FAN_POWER_OFFSET,
.speed = AQUASTREAMULT_FAN_SPEED_OFFSET
};
/* Fan structure offsets for all devices except those above */
static struct aqc_fan_structure_offsets aqc_general_fan_structure = {
.voltage = AQC_FAN_VOLTAGE_OFFSET,
.curr = AQC_FAN_CURRENT_OFFSET,
.power = AQC_FAN_POWER_OFFSET,
.speed = AQC_FAN_SPEED_OFFSET
};
struct aqc_data {
struct hid_device *hdev;
struct device *hwmon_dev;
struct dentry *debugfs;
struct mutex mutex; /* Used for locking access when reading and writing PWM values */
enum kinds kind;
const char *name;
int status_report_id; /* Used for legacy devices, report is stored in buffer */
int buffer_size;
u8 *buffer;
int checksum_start;
int checksum_length;
int checksum_offset;
int num_fans;
u16 *fan_sensor_offsets;
u16 *fan_ctrl_offsets;
int num_temp_sensors;
int temp_sensor_start_offset;
int num_virtual_temp_sensors;
int virtual_temp_sensor_start_offset;
int num_calc_virt_temp_sensors;
int calc_virt_temp_sensor_start_offset;
u16 temp_ctrl_offset;
u16 power_cycle_count_offset;
int num_flow_sensors;
u8 flow_sensors_start_offset;
u8 flow_pulses_ctrl_offset;
struct aqc_fan_structure_offsets *fan_structure;
/* General info, same across all devices */
u8 serial_number_start_offset;
u32 serial_number[2];
u8 firmware_version_offset;
u16 firmware_version;
/* How many times the device was powered on, if available */
u32 power_cycles;
/* Sensor values */
s32 temp_input[20]; /* Max 4 physical and 16 virtual or 8 physical and 12 virtual */
u16 speed_input[8];
u32 power_input[8];
u16 voltage_input[8];
u16 current_input[8];
/* Label values */
const char *const *temp_label;
const char *const *virtual_temp_label;
const char *const *calc_virt_temp_label; /* For Aquaero */
const char *const *speed_label;
const char *const *power_label;
const char *const *voltage_label;
const char *const *current_label;
unsigned long updated;
};
/* Converts from centi-percent */
static int aqc_percent_to_pwm(u16 val)
{
return DIV_ROUND_CLOSEST(val * 255, 100 * 100);
}
/* Converts to centi-percent */
static int aqc_pwm_to_percent(long val)
{
if (val < 0 || val > 255)
return -EINVAL;
return DIV_ROUND_CLOSEST(val * 100 * 100, 255);
}
/* Expects the mutex to be locked */
static int aqc_get_ctrl_data(struct aqc_data *priv)
{
int ret;
memset(priv->buffer, 0x00, priv->buffer_size);
ret = hid_hw_raw_request(priv->hdev, CTRL_REPORT_ID, priv->buffer, priv->buffer_size,
HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
if (ret < 0)
ret = -ENODATA;
return ret;
}
/* Expects the mutex to be locked */
static int aqc_send_ctrl_data(struct aqc_data *priv)
{
int ret;
u16 checksum;
/* Init and xorout value for CRC-16/USB is 0xffff */
checksum = crc16(0xffff, priv->buffer + priv->checksum_start, priv->checksum_length);
checksum ^= 0xffff;
/* Place the new checksum at the end of the report */
put_unaligned_be16(checksum, priv->buffer + priv->checksum_offset);
/* Send the patched up report back to the device */
ret = hid_hw_raw_request(priv->hdev, CTRL_REPORT_ID, priv->buffer, priv->buffer_size,
HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
if (ret < 0)
return ret;
/* The official software sends this report after every change, so do it here as well */
ret = hid_hw_raw_request(priv->hdev, SECONDARY_CTRL_REPORT_ID, secondary_ctrl_report,
SECONDARY_CTRL_REPORT_SIZE, HID_FEATURE_REPORT,
HID_REQ_SET_REPORT);
return ret;
}
/* Refreshes the control buffer and stores value at offset in val */
static int aqc_get_ctrl_val(struct aqc_data *priv, int offset, long *val)
{
int ret;
mutex_lock(&priv->mutex);
ret = aqc_get_ctrl_data(priv);
if (ret < 0)
goto unlock_and_return;
*val = (s16)get_unaligned_be16(priv->buffer + offset);
unlock_and_return:
mutex_unlock(&priv->mutex);
return ret;
}
static int aqc_set_ctrl_val(struct aqc_data *priv, int offset, long val)
{
int ret;
mutex_lock(&priv->mutex);
ret = aqc_get_ctrl_data(priv);
if (ret < 0)
goto unlock_and_return;
put_unaligned_be16((s16)val, priv->buffer + offset);
ret = aqc_send_ctrl_data(priv);
unlock_and_return:
mutex_unlock(&priv->mutex);
return ret;
}
static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr, int channel)
{
const struct aqc_data *priv = data;
switch (type) {
case hwmon_temp:
if (channel < priv->num_temp_sensors) {
switch (attr) {
case hwmon_temp_label:
case hwmon_temp_input:
return 0444;
case hwmon_temp_offset:
if (priv->temp_ctrl_offset != 0)
return 0644;
break;
default:
break;
}
}
if (channel <
priv->num_temp_sensors + priv->num_virtual_temp_sensors +
priv->num_calc_virt_temp_sensors)
switch (attr) {
case hwmon_temp_label:
case hwmon_temp_input:
return 0444;
default:
break;
}
break;
case hwmon_pwm:
if (priv->fan_ctrl_offsets && channel < priv->num_fans) {
switch (attr) {
case hwmon_pwm_input:
return 0644;
default:
break;
}
}
break;
case hwmon_fan:
switch (attr) {
case hwmon_fan_input:
case hwmon_fan_label:
switch (priv->kind) {
case aquastreamult:
/*
* Special case to support pump RPM, fan RPM,
* pressure and flow sensor
*/
if (channel < 4)
return 0444;
break;
case highflownext:
/* Special case to support flow sensor, water quality
* and conductivity
*/
if (channel < 3)
return 0444;
break;
case aquaero:
case quadro:
/* Special case to support flow sensors */
if (channel < priv->num_fans + priv->num_flow_sensors)
return 0444;
break;
default:
if (channel < priv->num_fans)
return 0444;
break;
}
break;
case hwmon_fan_pulses:
/* Special case for Quadro flow sensor */
if (priv->kind == quadro && channel == priv->num_fans)
return 0644;
break;
default:
break;
}
break;
case hwmon_power:
switch (priv->kind) {
case aquastreamult:
/* Special case to support pump and fan power */
if (channel < 2)
return 0444;
break;
case highflownext:
/* Special case to support one power sensor */
if (channel == 0)
return 0444;
break;
default:
if (channel < priv->num_fans)
return 0444;
break;
}
break;
case hwmon_curr:
switch (priv->kind) {
case aquastreamult:
/* Special case to support pump and fan current */
if (channel < 2)
return 0444;
break;
default:
if (channel < priv->num_fans)
return 0444;
break;
}
break;
case hwmon_in:
switch (priv->kind) {
case d5next:
/* Special case to support +5V and +12V voltage sensors */
if (channel < priv->num_fans + 2)
return 0444;
break;
case aquastreamult:
case highflownext:
/* Special case to support two voltage sensors */
if (channel < 2)
return 0444;
break;
default:
if (channel < priv->num_fans)
return 0444;
break;
}
break;
default:
break;
}
return 0;
}
/* Read device sensors by manually requesting the sensor report (legacy way) */
static int aqc_legacy_read(struct aqc_data *priv)
{
int ret, i, sensor_value;
mutex_lock(&priv->mutex);
memset(priv->buffer, 0x00, priv->buffer_size);
ret = hid_hw_raw_request(priv->hdev, priv->status_report_id, priv->buffer,
priv->buffer_size, HID_FEATURE_REPORT, HID_REQ_GET_REPORT);
if (ret < 0)
goto unlock_and_return;
/* Temperature sensor readings */
for (i = 0; i < priv->num_temp_sensors; i++) {
sensor_value = get_unaligned_le16(priv->buffer + priv->temp_sensor_start_offset +
i * AQC_SENSOR_SIZE);
priv->temp_input[i] = sensor_value * 10;
}
priv->updated = jiffies;
unlock_and_return:
mutex_unlock(&priv->mutex);
return ret;
}
static int aqc_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
int channel, long *val)
{
int ret;
struct aqc_data *priv = dev_get_drvdata(dev);
if (time_after(jiffies, priv->updated + STATUS_UPDATE_INTERVAL)) {
if (priv->status_report_id != 0) {
/* Legacy devices require manual reads */
ret = aqc_legacy_read(priv);
if (ret < 0)
return -ENODATA;
} else {
return -ENODATA;
}
}
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_input:
if (priv->temp_input[channel] == -ENODATA)
return -ENODATA;
*val = priv->temp_input[channel];
break;
case hwmon_temp_offset:
ret =
aqc_get_ctrl_val(priv, priv->temp_ctrl_offset +
channel * AQC_SENSOR_SIZE, val);
if (ret < 0)
return ret;
*val *= 10;
break;
default:
break;
}
break;
case hwmon_fan:
switch (attr) {
case hwmon_fan_input:
*val = priv->speed_input[channel];
break;
case hwmon_fan_pulses:
ret = aqc_get_ctrl_val(priv, priv->flow_pulses_ctrl_offset, val);
if (ret < 0)
return ret;
break;
default:
break;
}
break;
case hwmon_power:
*val = priv->power_input[channel];
break;
case hwmon_pwm:
if (priv->fan_ctrl_offsets) {
ret = aqc_get_ctrl_val(priv, priv->fan_ctrl_offsets[channel], val);
if (ret < 0)
return ret;
*val = aqc_percent_to_pwm(ret);
}
break;
case hwmon_in:
*val = priv->voltage_input[channel];
break;
case hwmon_curr:
*val = priv->current_input[channel];
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static int aqc_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
int channel, const char **str)
{
struct aqc_data *priv = dev_get_drvdata(dev);
/* Number of sensors that are not calculated */
int num_non_calc_sensors = priv->num_temp_sensors + priv->num_virtual_temp_sensors;
switch (type) {
case hwmon_temp:
if (channel < priv->num_temp_sensors) {
*str = priv->temp_label[channel];
} else {
if (priv->kind == aquaero && channel >= num_non_calc_sensors)
*str =
priv->calc_virt_temp_label[channel - num_non_calc_sensors];
else
*str = priv->virtual_temp_label[channel - priv->num_temp_sensors];
}
break;
case hwmon_fan:
*str = priv->speed_label[channel];
break;
case hwmon_power:
*str = priv->power_label[channel];
break;
case hwmon_in:
*str = priv->voltage_label[channel];
break;
case hwmon_curr:
*str = priv->current_label[channel];
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static int aqc_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
long val)
{
int ret, pwm_value;
struct aqc_data *priv = dev_get_drvdata(dev);
switch (type) {
case hwmon_temp:
switch (attr) {
case hwmon_temp_offset:
/* Limit temp offset to +/- 15K as in the official software */
val = clamp_val(val, -15000, 15000) / 10;
ret =
aqc_set_ctrl_val(priv, priv->temp_ctrl_offset +
channel * AQC_SENSOR_SIZE, val);
if (ret < 0)
return ret;
break;
default:
return -EOPNOTSUPP;
}
break;
case hwmon_fan:
switch (attr) {
case hwmon_fan_pulses:
val = clamp_val(val, 10, 1000);
ret = aqc_set_ctrl_val(priv, priv->flow_pulses_ctrl_offset, val);
if (ret < 0)
return ret;
break;
default:
break;
}
break;
case hwmon_pwm:
switch (attr) {
case hwmon_pwm_input:
if (priv->fan_ctrl_offsets) {
pwm_value = aqc_pwm_to_percent(val);
if (pwm_value < 0)
return pwm_value;
ret = aqc_set_ctrl_val(priv, priv->fan_ctrl_offsets[channel],
pwm_value);
if (ret < 0)
return ret;
}
break;
default:
break;
}
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static const struct hwmon_ops aqc_hwmon_ops = {
.is_visible = aqc_is_visible,
.read = aqc_read,
.read_string = aqc_read_string,
.write = aqc_write
};
static const struct hwmon_channel_info *aqc_info[] = {
HWMON_CHANNEL_INFO(temp,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL,
HWMON_T_INPUT | HWMON_T_LABEL),
HWMON_CHANNEL_INFO(fan,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_PULSES,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL,
HWMON_F_INPUT | HWMON_F_LABEL),
HWMON_CHANNEL_INFO(power,
HWMON_P_INPUT | HWMON_P_LABEL,
HWMON_P_INPUT | HWMON_P_LABEL,
HWMON_P_INPUT | HWMON_P_LABEL,
HWMON_P_INPUT | HWMON_P_LABEL,
HWMON_P_INPUT | HWMON_P_LABEL,
HWMON_P_INPUT | HWMON_P_LABEL,
HWMON_P_INPUT | HWMON_P_LABEL,
HWMON_P_INPUT | HWMON_P_LABEL),
HWMON_CHANNEL_INFO(pwm,
HWMON_PWM_INPUT,
HWMON_PWM_INPUT,
HWMON_PWM_INPUT,
HWMON_PWM_INPUT,
HWMON_PWM_INPUT,
HWMON_PWM_INPUT,
HWMON_PWM_INPUT,
HWMON_PWM_INPUT),
HWMON_CHANNEL_INFO(in,
HWMON_I_INPUT | HWMON_I_LABEL,
HWMON_I_INPUT | HWMON_I_LABEL,
HWMON_I_INPUT | HWMON_I_LABEL,
HWMON_I_INPUT | HWMON_I_LABEL,
HWMON_I_INPUT | HWMON_I_LABEL,
HWMON_I_INPUT | HWMON_I_LABEL,
HWMON_I_INPUT | HWMON_I_LABEL,
HWMON_I_INPUT | HWMON_I_LABEL),
HWMON_CHANNEL_INFO(curr,
HWMON_C_INPUT | HWMON_C_LABEL,
HWMON_C_INPUT | HWMON_C_LABEL,
HWMON_C_INPUT | HWMON_C_LABEL,
HWMON_C_INPUT | HWMON_C_LABEL,
HWMON_C_INPUT | HWMON_C_LABEL,
HWMON_C_INPUT | HWMON_C_LABEL,
HWMON_C_INPUT | HWMON_C_LABEL,
HWMON_C_INPUT | HWMON_C_LABEL),
NULL
};
static const struct hwmon_chip_info aqc_chip_info = {
.ops = &aqc_hwmon_ops,
.info = aqc_info,
};
static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
{
int i, j, sensor_value;
struct aqc_data *priv;
if (report->id != STATUS_REPORT_ID)
return 0;
priv = hid_get_drvdata(hdev);
/* Info provided with every report */
priv->serial_number[0] = get_unaligned_be16(data + priv->serial_number_start_offset);
priv->serial_number[1] = get_unaligned_be16(data + priv->serial_number_start_offset +
SERIAL_PART_OFFSET);
priv->firmware_version = get_unaligned_be16(data + priv->firmware_version_offset);
/* Physical temperature sensor readings */
for (i = 0; i < priv->num_temp_sensors; i++) {
sensor_value = get_unaligned_be16(data +
priv->temp_sensor_start_offset +
i * AQC_SENSOR_SIZE);
if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED)
priv->temp_input[i] = -ENODATA;
else
priv->temp_input[i] = sensor_value * 10;
}
/* Virtual temperature sensor readings */
for (j = 0; j < priv->num_virtual_temp_sensors; j++) {
sensor_value = get_unaligned_be16(data +
priv->virtual_temp_sensor_start_offset +
j * AQC_SENSOR_SIZE);
if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED)
priv->temp_input[i] = -ENODATA;
else
priv->temp_input[i] = sensor_value * 10;
i++;
}
/* Fan speed and related readings */
for (i = 0; i < priv->num_fans; i++) {
priv->speed_input[i] =
get_unaligned_be16(data + priv->fan_sensor_offsets[i] +
priv->fan_structure->speed);
priv->power_input[i] =
get_unaligned_be16(data + priv->fan_sensor_offsets[i] +
priv->fan_structure->power) * 10000;
priv->voltage_input[i] =
get_unaligned_be16(data + priv->fan_sensor_offsets[i] +
priv->fan_structure->voltage) * 10;
priv->current_input[i] =
get_unaligned_be16(data + priv->fan_sensor_offsets[i] +
priv->fan_structure->curr);
}
/* Flow sensor readings */
for (j = 0; j < priv->num_flow_sensors; j++) {
priv->speed_input[i] = get_unaligned_be16(data + priv->flow_sensors_start_offset +
j * AQC_SENSOR_SIZE);
i++;
}
if (priv->power_cycle_count_offset != 0)
priv->power_cycles = get_unaligned_be32(data + priv->power_cycle_count_offset);
/* Special-case sensor readings */
switch (priv->kind) {
case aquaero:
/* Read calculated virtual temp sensors */
i = priv->num_temp_sensors + priv->num_virtual_temp_sensors;
for (j = 0; j < priv->num_calc_virt_temp_sensors; j++) {
sensor_value = get_unaligned_be16(data +
priv->calc_virt_temp_sensor_start_offset +
j * AQC_SENSOR_SIZE);
if (sensor_value == AQC_TEMP_SENSOR_DISCONNECTED)
priv->temp_input[i] = -ENODATA;
else
priv->temp_input[i] = sensor_value * 10;
i++;
}
break;
case aquastreamult:
priv->speed_input[1] = get_unaligned_be16(data + AQUASTREAMULT_PUMP_OFFSET);
priv->speed_input[2] = get_unaligned_be16(data + AQUASTREAMULT_PRESSURE_OFFSET);
priv->speed_input[3] = get_unaligned_be16(data + AQUASTREAMULT_FLOW_SENSOR_OFFSET);
priv->power_input[1] = get_unaligned_be16(data + AQUASTREAMULT_PUMP_POWER) * 10000;
priv->voltage_input[1] = get_unaligned_be16(data + AQUASTREAMULT_PUMP_VOLTAGE) * 10;
priv->current_input[1] = get_unaligned_be16(data + AQUASTREAMULT_PUMP_CURRENT);
break;
case d5next:
priv->voltage_input[2] = get_unaligned_be16(data + D5NEXT_5V_VOLTAGE) * 10;
priv->voltage_input[3] = get_unaligned_be16(data + D5NEXT_12V_VOLTAGE) * 10;
break;
case highflownext:
/* If external temp sensor is not connected, its power reading is also N/A */
if (priv->temp_input[1] == -ENODATA)
priv->power_input[0] = -ENODATA;
else
priv->power_input[0] =
get_unaligned_be16(data + HIGHFLOWNEXT_POWER) * 1000000;
priv->voltage_input[0] = get_unaligned_be16(data + HIGHFLOWNEXT_5V_VOLTAGE) * 10;
priv->voltage_input[1] =
get_unaligned_be16(data + HIGHFLOWNEXT_5V_VOLTAGE_USB) * 10;
priv->speed_input[1] = get_unaligned_be16(data + HIGHFLOWNEXT_WATER_QUALITY);
priv->speed_input[2] = get_unaligned_be16(data + HIGHFLOWNEXT_CONDUCTIVITY);
break;
default:
break;
}
priv->updated = jiffies;
return 0;
}
#ifdef CONFIG_DEBUG_FS
static int serial_number_show(struct seq_file *seqf, void *unused)
{
struct aqc_data *priv = seqf->private;
seq_printf(seqf, "%05u-%05u\n", priv->serial_number[0], priv->serial_number[1]);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(serial_number);
static int firmware_version_show(struct seq_file *seqf, void *unused)
{
struct aqc_data *priv = seqf->private;
seq_printf(seqf, "%u\n", priv->firmware_version);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(firmware_version);
static int power_cycles_show(struct seq_file *seqf, void *unused)
{
struct aqc_data *priv = seqf->private;
seq_printf(seqf, "%u\n", priv->power_cycles);
return 0;
}
DEFINE_SHOW_ATTRIBUTE(power_cycles);
static void aqc_debugfs_init(struct aqc_data *priv)
{
char name[64];
scnprintf(name, sizeof(name), "%s_%s-%s", "aquacomputer", priv->name,
dev_name(&priv->hdev->dev));
priv->debugfs = debugfs_create_dir(name, NULL);
if (priv->serial_number_start_offset != 0)
debugfs_create_file("serial_number", 0444, priv->debugfs, priv,
&serial_number_fops);
if (priv->firmware_version_offset != 0)
debugfs_create_file("firmware_version", 0444, priv->debugfs, priv,
&firmware_version_fops);
if (priv->power_cycle_count_offset != 0)
debugfs_create_file("power_cycles", 0444, priv->debugfs, priv, &power_cycles_fops);
}
#else
static void aqc_debugfs_init(struct aqc_data *priv)
{
}
#endif
static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
{
struct aqc_data *priv;
int ret;
priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->hdev = hdev;
hid_set_drvdata(hdev, priv);
priv->updated = jiffies - STATUS_UPDATE_INTERVAL;
ret = hid_parse(hdev);
if (ret)
return ret;
ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
if (ret)
return ret;
ret = hid_hw_open(hdev);
if (ret)
goto fail_and_stop;
switch (hdev->product) {
case USB_PRODUCT_ID_AQUAERO:
/*
* Aquaero presents itself as three HID devices under the same product ID:
* "aquaero keyboard/mouse", "aquaero System Control" and "aquaero Device",
* which is the one we want to communicate with. Unlike most other Aquacomputer
* devices, Aquaero does not return meaningful data when explicitly requested
* using GET_FEATURE_REPORT.
*
* The difference between "aquaero Device" and the other two is in the collections
* they present. The two other devices have the type of the second element in
* their respective collections set to 1, while the real device has it set to 0.
*/
if (hdev->collection[1].type != 0) {
ret = -ENODEV;
goto fail_and_close;
}
priv->kind = aquaero;
priv->num_fans = AQUAERO_NUM_FANS;
priv->fan_sensor_offsets = aquaero_sensor_fan_offsets;
priv->num_temp_sensors = AQUAERO_NUM_SENSORS;
priv->temp_sensor_start_offset = AQUAERO_SENSOR_START;
priv->num_virtual_temp_sensors = AQUAERO_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = AQUAERO_VIRTUAL_SENSOR_START;
priv->num_calc_virt_temp_sensors = AQUAERO_NUM_CALC_VIRTUAL_SENSORS;
priv->calc_virt_temp_sensor_start_offset = AQUAERO_CALC_VIRTUAL_SENSOR_START;
priv->num_flow_sensors = AQUAERO_NUM_FLOW_SENSORS;
priv->flow_sensors_start_offset = AQUAERO_FLOW_SENSORS_START;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
priv->calc_virt_temp_label = label_aquaero_calc_temp_sensors;
priv->speed_label = label_aquaero_speeds;
priv->power_label = label_fan_power;
priv->voltage_label = label_fan_voltage;
priv->current_label = label_fan_current;
break;
case USB_PRODUCT_ID_D5NEXT:
priv->kind = d5next;
priv->num_fans = D5NEXT_NUM_FANS;
priv->fan_sensor_offsets = d5next_sensor_fan_offsets;
priv->fan_ctrl_offsets = d5next_ctrl_fan_offsets;
priv->num_temp_sensors = D5NEXT_NUM_SENSORS;
priv->temp_sensor_start_offset = D5NEXT_COOLANT_TEMP;
priv->num_virtual_temp_sensors = D5NEXT_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = D5NEXT_VIRTUAL_SENSORS_START;
priv->temp_ctrl_offset = D5NEXT_TEMP_CTRL_OFFSET;
priv->buffer_size = D5NEXT_CTRL_REPORT_SIZE;
priv->power_cycle_count_offset = D5NEXT_POWER_CYCLES;
priv->temp_label = label_d5next_temp;
priv->virtual_temp_label = label_virtual_temp_sensors;
priv->speed_label = label_d5next_speeds;
priv->power_label = label_d5next_power;
priv->voltage_label = label_d5next_voltages;
priv->current_label = label_d5next_current;
break;
case USB_PRODUCT_ID_FARBWERK:
priv->kind = farbwerk;
priv->num_fans = 0;
priv->num_temp_sensors = FARBWERK_NUM_SENSORS;
priv->temp_sensor_start_offset = FARBWERK_SENSOR_START;
priv->temp_label = label_temp_sensors;
break;
case USB_PRODUCT_ID_FARBWERK360:
priv->kind = farbwerk360;
priv->num_fans = 0;
priv->num_temp_sensors = FARBWERK360_NUM_SENSORS;
priv->temp_sensor_start_offset = FARBWERK360_SENSOR_START;
priv->num_virtual_temp_sensors = FARBWERK360_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = FARBWERK360_VIRTUAL_SENSORS_START;
priv->temp_ctrl_offset = FARBWERK360_TEMP_CTRL_OFFSET;
priv->buffer_size = FARBWERK360_CTRL_REPORT_SIZE;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
break;
case USB_PRODUCT_ID_OCTO:
priv->kind = octo;
priv->num_fans = OCTO_NUM_FANS;
priv->fan_sensor_offsets = octo_sensor_fan_offsets;
priv->fan_ctrl_offsets = octo_ctrl_fan_offsets;
priv->num_temp_sensors = OCTO_NUM_SENSORS;
priv->temp_sensor_start_offset = OCTO_SENSOR_START;
priv->num_virtual_temp_sensors = OCTO_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = OCTO_VIRTUAL_SENSORS_START;
priv->temp_ctrl_offset = OCTO_TEMP_CTRL_OFFSET;
priv->buffer_size = OCTO_CTRL_REPORT_SIZE;
priv->power_cycle_count_offset = OCTO_POWER_CYCLES;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
priv->speed_label = label_fan_speed;
priv->power_label = label_fan_power;
priv->voltage_label = label_fan_voltage;
priv->current_label = label_fan_current;
break;
case USB_PRODUCT_ID_QUADRO:
priv->kind = quadro;
priv->num_fans = QUADRO_NUM_FANS;
priv->fan_sensor_offsets = quadro_sensor_fan_offsets;
priv->fan_ctrl_offsets = quadro_ctrl_fan_offsets;
priv->num_temp_sensors = QUADRO_NUM_SENSORS;
priv->temp_sensor_start_offset = QUADRO_SENSOR_START;
priv->num_virtual_temp_sensors = QUADRO_NUM_VIRTUAL_SENSORS;
priv->virtual_temp_sensor_start_offset = QUADRO_VIRTUAL_SENSORS_START;
priv->num_flow_sensors = QUADRO_NUM_FLOW_SENSORS;
priv->flow_sensors_start_offset = QUADRO_FLOW_SENSOR_OFFSET;
priv->temp_ctrl_offset = QUADRO_TEMP_CTRL_OFFSET;
priv->buffer_size = QUADRO_CTRL_REPORT_SIZE;
priv->flow_pulses_ctrl_offset = QUADRO_FLOW_PULSES_CTRL_OFFSET;
priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
priv->temp_label = label_temp_sensors;
priv->virtual_temp_label = label_virtual_temp_sensors;
priv->speed_label = label_quadro_speeds;
priv->power_label = label_fan_power;
priv->voltage_label = label_fan_voltage;
priv->current_label = label_fan_current;
break;
case USB_PRODUCT_ID_HIGHFLOWNEXT:
priv->kind = highflownext;
priv->num_fans = 0;
priv->num_temp_sensors = HIGHFLOWNEXT_NUM_SENSORS;
priv->temp_sensor_start_offset = HIGHFLOWNEXT_SENSOR_START;
priv->num_flow_sensors = HIGHFLOWNEXT_NUM_FLOW_SENSORS;
priv->flow_sensors_start_offset = HIGHFLOWNEXT_FLOW;
priv->power_cycle_count_offset = QUADRO_POWER_CYCLES;
priv->temp_label = label_highflownext_temp_sensors;
priv->speed_label = label_highflownext_fan_speed;
priv->power_label = label_highflownext_power;
priv->voltage_label = label_highflownext_voltage;
break;
case USB_PRODUCT_ID_AQUASTREAMULT:
priv->kind = aquastreamult;
priv->num_fans = AQUASTREAMULT_NUM_FANS;
priv->fan_sensor_offsets = aquastreamult_sensor_fan_offsets;
priv->num_temp_sensors = AQUASTREAMULT_NUM_SENSORS;
priv->temp_sensor_start_offset = AQUASTREAMULT_SENSOR_START;
priv->temp_label = label_aquastreamult_temp;
priv->speed_label = label_aquastreamult_speeds;
priv->power_label = label_aquastreamult_power;
priv->voltage_label = label_aquastreamult_voltages;
priv->current_label = label_aquastreamult_current;
break;
case USB_PRODUCT_ID_POWERADJUST3:
priv->kind = poweradjust3;
priv->num_fans = 0;
priv->num_temp_sensors = POWERADJUST3_NUM_SENSORS;
priv->temp_sensor_start_offset = POWERADJUST3_SENSOR_START;
priv->buffer_size = POWERADJUST3_SENSOR_REPORT_SIZE;
priv->temp_label = label_poweradjust3_temp_sensors;
break;
default:
break;
}
switch (priv->kind) {
case aquaero:
priv->serial_number_start_offset = AQUAERO_SERIAL_START;
priv->firmware_version_offset = AQUAERO_FIRMWARE_VERSION;
priv->fan_structure = &aqc_aquaero_fan_structure;
break;
case poweradjust3:
priv->status_report_id = POWERADJUST3_STATUS_REPORT_ID;
break;
default:
priv->serial_number_start_offset = AQC_SERIAL_START;
priv->firmware_version_offset = AQC_FIRMWARE_VERSION;
if (priv->kind == aquastreamult)
priv->fan_structure = &aqc_aquastreamult_fan_structure;
else
priv->fan_structure = &aqc_general_fan_structure;
break;
}
if (priv->buffer_size != 0) {
priv->checksum_start = 0x01;
priv->checksum_length = priv->buffer_size - 3;
priv->checksum_offset = priv->buffer_size - 2;
}
priv->name = aqc_device_names[priv->kind];
priv->buffer = devm_kzalloc(&hdev->dev, priv->buffer_size, GFP_KERNEL);
if (!priv->buffer) {
ret = -ENOMEM;
goto fail_and_close;
}
mutex_init(&priv->mutex);
priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, priv->name, priv,
&aqc_chip_info, NULL);
if (IS_ERR(priv->hwmon_dev)) {
ret = PTR_ERR(priv->hwmon_dev);
goto fail_and_close;
}
aqc_debugfs_init(priv);
return 0;
fail_and_close:
hid_hw_close(hdev);
fail_and_stop:
hid_hw_stop(hdev);
return ret;
}
static void aqc_remove(struct hid_device *hdev)
{
struct aqc_data *priv = hid_get_drvdata(hdev);
debugfs_remove_recursive(priv->debugfs);
hwmon_device_unregister(priv->hwmon_dev);
hid_hw_close(hdev);
hid_hw_stop(hdev);
}
static const struct hid_device_id aqc_table[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_AQUAERO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_D5NEXT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_QUADRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_HIGHFLOWNEXT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_AQUASTREAMULT) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_POWERADJUST3) },
{ }
};
MODULE_DEVICE_TABLE(hid, aqc_table);
static struct hid_driver aqc_driver = {
.name = DRIVER_NAME,
.id_table = aqc_table,
.probe = aqc_probe,
.remove = aqc_remove,
.raw_event = aqc_raw_event,
};
static int __init aqc_init(void)
{
return hid_register_driver(&aqc_driver);
}
static void __exit aqc_exit(void)
{
hid_unregister_driver(&aqc_driver);
}
/* Request to initialize after the HID bus to ensure it's not being loaded before */
late_initcall(aqc_init);
module_exit(aqc_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Aleksa Savic <savicaleksa83@gmail.com>");
MODULE_AUTHOR("Jack Doan <me@jackdoan.com>");
MODULE_DESCRIPTION("Hwmon driver for Aquacomputer devices");
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку