289 строки
8.5 KiB
C
289 строки
8.5 KiB
C
/*
|
|
* intel TCO vendor specific watchdog driver support
|
|
*
|
|
* (c) Copyright 2006-2008 Wim Van Sebroeck <wim@iguana.be>.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
|
|
* provide warranty for any of this software. This material is
|
|
* provided "AS-IS" and at no charge.
|
|
*/
|
|
|
|
/*
|
|
* Includes, defines, variables, module parameters, ...
|
|
*/
|
|
|
|
/* Module and version information */
|
|
#define DRV_NAME "iTCO_vendor_support"
|
|
#define DRV_VERSION "1.02"
|
|
#define PFX DRV_NAME ": "
|
|
|
|
/* Includes */
|
|
#include <linux/module.h> /* For module specific items */
|
|
#include <linux/moduleparam.h> /* For new moduleparam's */
|
|
#include <linux/types.h> /* For standard types (like size_t) */
|
|
#include <linux/errno.h> /* For the -ENODEV/... values */
|
|
#include <linux/kernel.h> /* For printk/panic/... */
|
|
#include <linux/init.h> /* For __init/__exit/... */
|
|
#include <linux/ioport.h> /* For io-port access */
|
|
#include <linux/io.h> /* For inb/outb/... */
|
|
|
|
#include "iTCO_vendor.h"
|
|
|
|
/* iTCO defines */
|
|
#define SMI_EN acpibase + 0x30 /* SMI Control and Enable Register */
|
|
#define TCOBASE acpibase + 0x60 /* TCO base address */
|
|
#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
|
|
|
|
/* List of vendor support modes */
|
|
/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
|
|
#define SUPERMICRO_OLD_BOARD 1
|
|
/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
|
|
#define SUPERMICRO_NEW_BOARD 2
|
|
|
|
static int vendorsupport;
|
|
module_param(vendorsupport, int, 0);
|
|
MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
|
|
|
|
/*
|
|
* Vendor Specific Support
|
|
*/
|
|
|
|
/*
|
|
* Vendor Support: 1
|
|
* Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE
|
|
* iTCO chipset: ICH2
|
|
*
|
|
* Code contributed by: R. Seretny <lkpatches@paypc.com>
|
|
* Documentation obtained by R. Seretny from SuperMicro Technical Support
|
|
*
|
|
* To enable Watchdog function:
|
|
* BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes
|
|
* This setting enables SMI to clear the watchdog expired flag.
|
|
* If BIOS or CPU fail which may cause SMI hang, then system will
|
|
* reboot. When application starts to use watchdog function,
|
|
* application has to take over the control from SMI.
|
|
*
|
|
* For P3TSSE, J36 jumper needs to be removed to enable the Watchdog
|
|
* function.
|
|
*
|
|
* Note: The system will reboot when Expire Flag is set TWICE.
|
|
* So, if the watchdog timer is 20 seconds, then the maximum hang
|
|
* time is about 40 seconds, and the minimum hang time is about
|
|
* 20.6 seconds.
|
|
*/
|
|
|
|
static void supermicro_old_pre_keepalive(unsigned long acpibase)
|
|
{
|
|
/* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
|
|
/* Clear "Expire Flag" (Bit 3 of TC01_STS register) */
|
|
outb(0x08, TCO1_STS);
|
|
}
|
|
|
|
/*
|
|
* Vendor Support: 2
|
|
* Board: Super Micro Computer Inc. P4SBx, P4DPx
|
|
* iTCO chipset: ICH4
|
|
*
|
|
* Code contributed by: R. Seretny <lkpatches@paypc.com>
|
|
* Documentation obtained by R. Seretny from SuperMicro Technical Support
|
|
*
|
|
* To enable Watchdog function:
|
|
* 1. BIOS
|
|
* For P4SBx:
|
|
* BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature
|
|
* For P4DPx:
|
|
* BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog
|
|
* This setting enables or disables Watchdog function. When enabled, the
|
|
* default watchdog timer is set to be 5 minutes (about 4m35s). It is
|
|
* enough to load and run the OS. The application (service or driver) has
|
|
* to take over the control once OS is running up and before watchdog
|
|
* expires.
|
|
*
|
|
* 2. JUMPER
|
|
* For P4SBx: JP39
|
|
* For P4DPx: JP37
|
|
* This jumper is used for safety. Closed is enabled. This jumper
|
|
* prevents user enables watchdog in BIOS by accident.
|
|
*
|
|
* To enable Watch Dog function, both BIOS and JUMPER must be enabled.
|
|
*
|
|
* The documentation lists motherboards P4SBx and P4DPx series as of
|
|
* 20-March-2002. However, this code works flawlessly with much newer
|
|
* motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82).
|
|
*
|
|
* The original iTCO driver as written does not actually reset the
|
|
* watchdog timer on these machines, as a result they reboot after five
|
|
* minutes.
|
|
*
|
|
* NOTE: You may leave the Watchdog function disabled in the SuperMicro
|
|
* BIOS to avoid a "boot-race"... This driver will enable watchdog
|
|
* functionality even if it's disabled in the BIOS once the /dev/watchdog
|
|
* file is opened.
|
|
*/
|
|
|
|
/* I/O Port's */
|
|
#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */
|
|
#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */
|
|
|
|
/* Control Register's */
|
|
#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */
|
|
#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */
|
|
|
|
#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */
|
|
|
|
#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */
|
|
|
|
#define SM_ENDWATCH 0xAA /* Watchdog lock control page */
|
|
|
|
#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */
|
|
/* (Bit 3: 0 = seconds, 1 = minutes */
|
|
|
|
#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */
|
|
|
|
#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */
|
|
/* Bit 6: timer is reset by kbd interrupt */
|
|
/* Bit 7: timer is reset by mouse interrupt */
|
|
|
|
static void supermicro_new_unlock_watchdog(void)
|
|
{
|
|
/* Write 0x87 to port 0x2e twice */
|
|
outb(SM_WATCHPAGE, SM_REGINDEX);
|
|
outb(SM_WATCHPAGE, SM_REGINDEX);
|
|
/* Switch to watchdog control page */
|
|
outb(SM_CTLPAGESW, SM_REGINDEX);
|
|
outb(SM_CTLPAGE, SM_DATAIO);
|
|
}
|
|
|
|
static void supermicro_new_lock_watchdog(void)
|
|
{
|
|
outb(SM_ENDWATCH, SM_REGINDEX);
|
|
}
|
|
|
|
static void supermicro_new_pre_start(unsigned int heartbeat)
|
|
{
|
|
unsigned int val;
|
|
|
|
supermicro_new_unlock_watchdog();
|
|
|
|
/* Watchdog timer setting needs to be in seconds*/
|
|
outb(SM_COUNTMODE, SM_REGINDEX);
|
|
val = inb(SM_DATAIO);
|
|
val &= 0xF7;
|
|
outb(val, SM_DATAIO);
|
|
|
|
/* Write heartbeat interval to WDOG */
|
|
outb(SM_WATCHTIMER, SM_REGINDEX);
|
|
outb((heartbeat & 255), SM_DATAIO);
|
|
|
|
/* Make sure keyboard/mouse interrupts don't interfere */
|
|
outb(SM_RESETCONTROL, SM_REGINDEX);
|
|
val = inb(SM_DATAIO);
|
|
val &= 0x3f;
|
|
outb(val, SM_DATAIO);
|
|
|
|
/* enable watchdog by setting bit 0 of Watchdog Enable to 1 */
|
|
outb(SM_WATCHENABLE, SM_REGINDEX);
|
|
val = inb(SM_DATAIO);
|
|
val |= 0x01;
|
|
outb(val, SM_DATAIO);
|
|
|
|
supermicro_new_lock_watchdog();
|
|
}
|
|
|
|
static void supermicro_new_pre_stop(void)
|
|
{
|
|
unsigned int val;
|
|
|
|
supermicro_new_unlock_watchdog();
|
|
|
|
/* disable watchdog by setting bit 0 of Watchdog Enable to 0 */
|
|
outb(SM_WATCHENABLE, SM_REGINDEX);
|
|
val = inb(SM_DATAIO);
|
|
val &= 0xFE;
|
|
outb(val, SM_DATAIO);
|
|
|
|
supermicro_new_lock_watchdog();
|
|
}
|
|
|
|
static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
|
|
{
|
|
supermicro_new_unlock_watchdog();
|
|
|
|
/* reset watchdog timeout to heartveat value */
|
|
outb(SM_WATCHTIMER, SM_REGINDEX);
|
|
outb((heartbeat & 255), SM_DATAIO);
|
|
|
|
supermicro_new_lock_watchdog();
|
|
}
|
|
|
|
/*
|
|
* Generic Support Functions
|
|
*/
|
|
|
|
void iTCO_vendor_pre_start(unsigned long acpibase,
|
|
unsigned int heartbeat)
|
|
{
|
|
if (vendorsupport == SUPERMICRO_NEW_BOARD)
|
|
supermicro_new_pre_start(heartbeat);
|
|
}
|
|
EXPORT_SYMBOL(iTCO_vendor_pre_start);
|
|
|
|
void iTCO_vendor_pre_stop(unsigned long acpibase)
|
|
{
|
|
if (vendorsupport == SUPERMICRO_NEW_BOARD)
|
|
supermicro_new_pre_stop();
|
|
}
|
|
EXPORT_SYMBOL(iTCO_vendor_pre_stop);
|
|
|
|
void iTCO_vendor_pre_keepalive(unsigned long acpibase, unsigned int heartbeat)
|
|
{
|
|
if (vendorsupport == SUPERMICRO_OLD_BOARD)
|
|
supermicro_old_pre_keepalive(acpibase);
|
|
else if (vendorsupport == SUPERMICRO_NEW_BOARD)
|
|
supermicro_new_pre_set_heartbeat(heartbeat);
|
|
}
|
|
EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
|
|
|
|
void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat)
|
|
{
|
|
if (vendorsupport == SUPERMICRO_NEW_BOARD)
|
|
supermicro_new_pre_set_heartbeat(heartbeat);
|
|
}
|
|
EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
|
|
|
|
int iTCO_vendor_check_noreboot_on(void)
|
|
{
|
|
switch (vendorsupport) {
|
|
case SUPERMICRO_OLD_BOARD:
|
|
return 0;
|
|
default:
|
|
return 1;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
|
|
|
|
static int __init iTCO_vendor_init_module(void)
|
|
{
|
|
printk(KERN_INFO PFX "vendor-support=%d\n", vendorsupport);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit iTCO_vendor_exit_module(void)
|
|
{
|
|
printk(KERN_INFO PFX "Module Unloaded\n");
|
|
}
|
|
|
|
module_init(iTCO_vendor_init_module);
|
|
module_exit(iTCO_vendor_exit_module);
|
|
|
|
MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, R. Seretny <lkpatches@paypc.com>");
|
|
MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
|