360 строки
8.3 KiB
C
360 строки
8.3 KiB
C
/*
|
|
* STMicroelectronics uvis25 sensor driver
|
|
*
|
|
* Copyright 2017 STMicroelectronics Inc.
|
|
*
|
|
* Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqreturn.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include "st_uvis25.h"
|
|
|
|
#define ST_UVIS25_REG_WHOAMI_ADDR 0x0f
|
|
#define ST_UVIS25_REG_WHOAMI_VAL 0xca
|
|
#define ST_UVIS25_REG_CTRL1_ADDR 0x20
|
|
#define ST_UVIS25_REG_ODR_MASK BIT(0)
|
|
#define ST_UVIS25_REG_BDU_MASK BIT(1)
|
|
#define ST_UVIS25_REG_CTRL2_ADDR 0x21
|
|
#define ST_UVIS25_REG_BOOT_MASK BIT(7)
|
|
#define ST_UVIS25_REG_CTRL3_ADDR 0x22
|
|
#define ST_UVIS25_REG_HL_MASK BIT(7)
|
|
#define ST_UVIS25_REG_STATUS_ADDR 0x27
|
|
#define ST_UVIS25_REG_UV_DA_MASK BIT(0)
|
|
#define ST_UVIS25_REG_OUT_ADDR 0x28
|
|
|
|
static const struct iio_chan_spec st_uvis25_channels[] = {
|
|
{
|
|
.type = IIO_UVINDEX,
|
|
.address = ST_UVIS25_REG_OUT_ADDR,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
|
|
.scan_index = 0,
|
|
.scan_type = {
|
|
.sign = 'u',
|
|
.realbits = 8,
|
|
.storagebits = 8,
|
|
},
|
|
},
|
|
IIO_CHAN_SOFT_TIMESTAMP(1),
|
|
};
|
|
|
|
static int st_uvis25_check_whoami(struct st_uvis25_hw *hw)
|
|
{
|
|
int err, data;
|
|
|
|
err = regmap_read(hw->regmap, ST_UVIS25_REG_WHOAMI_ADDR, &data);
|
|
if (err < 0) {
|
|
dev_err(regmap_get_device(hw->regmap),
|
|
"failed to read whoami register\n");
|
|
return err;
|
|
}
|
|
|
|
if (data != ST_UVIS25_REG_WHOAMI_VAL) {
|
|
dev_err(regmap_get_device(hw->regmap),
|
|
"wrong whoami {%02x vs %02x}\n",
|
|
data, ST_UVIS25_REG_WHOAMI_VAL);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int st_uvis25_set_enable(struct st_uvis25_hw *hw, bool enable)
|
|
{
|
|
int err;
|
|
|
|
err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR,
|
|
ST_UVIS25_REG_ODR_MASK, enable);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
hw->enabled = enable;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int st_uvis25_read_oneshot(struct st_uvis25_hw *hw, u8 addr, int *val)
|
|
{
|
|
int err;
|
|
|
|
err = st_uvis25_set_enable(hw, true);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
msleep(1500);
|
|
|
|
/*
|
|
* in order to avoid possible race conditions with interrupt
|
|
* generation, disable the sensor first and then poll output
|
|
* register. That sequence guarantees the interrupt will be reset
|
|
* when irq line is unmasked
|
|
*/
|
|
err = st_uvis25_set_enable(hw, false);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = regmap_read(hw->regmap, addr, val);
|
|
|
|
return err < 0 ? err : IIO_VAL_INT;
|
|
}
|
|
|
|
static int st_uvis25_read_raw(struct iio_dev *iio_dev,
|
|
struct iio_chan_spec const *ch,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
int ret;
|
|
|
|
ret = iio_device_claim_direct_mode(iio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_PROCESSED: {
|
|
struct st_uvis25_hw *hw = iio_priv(iio_dev);
|
|
|
|
/*
|
|
* mask irq line during oneshot read since the sensor
|
|
* does not export the capability to disable data-ready line
|
|
* in the register map and it is enabled by default.
|
|
* If the line is unmasked during read_raw() it will be set
|
|
* active and never reset since the trigger is disabled
|
|
*/
|
|
if (hw->irq > 0)
|
|
disable_irq(hw->irq);
|
|
ret = st_uvis25_read_oneshot(hw, ch->address, val);
|
|
if (hw->irq > 0)
|
|
enable_irq(hw->irq);
|
|
break;
|
|
}
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
iio_device_release_direct_mode(iio_dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t st_uvis25_trigger_handler_thread(int irq, void *private)
|
|
{
|
|
struct st_uvis25_hw *hw = private;
|
|
int err, status;
|
|
|
|
err = regmap_read(hw->regmap, ST_UVIS25_REG_STATUS_ADDR, &status);
|
|
if (err < 0)
|
|
return IRQ_HANDLED;
|
|
|
|
if (!(status & ST_UVIS25_REG_UV_DA_MASK))
|
|
return IRQ_NONE;
|
|
|
|
iio_trigger_poll_chained(hw->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int st_uvis25_allocate_trigger(struct iio_dev *iio_dev)
|
|
{
|
|
struct st_uvis25_hw *hw = iio_priv(iio_dev);
|
|
struct device *dev = regmap_get_device(hw->regmap);
|
|
bool irq_active_low = false;
|
|
unsigned long irq_type;
|
|
int err;
|
|
|
|
irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
|
|
|
|
switch (irq_type) {
|
|
case IRQF_TRIGGER_HIGH:
|
|
case IRQF_TRIGGER_RISING:
|
|
break;
|
|
case IRQF_TRIGGER_LOW:
|
|
case IRQF_TRIGGER_FALLING:
|
|
irq_active_low = true;
|
|
break;
|
|
default:
|
|
dev_info(dev, "mode %lx unsupported\n", irq_type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL3_ADDR,
|
|
ST_UVIS25_REG_HL_MASK, irq_active_low);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = devm_request_threaded_irq(dev, hw->irq, NULL,
|
|
st_uvis25_trigger_handler_thread,
|
|
irq_type | IRQF_ONESHOT,
|
|
iio_dev->name, hw);
|
|
if (err) {
|
|
dev_err(dev, "failed to request trigger irq %d\n",
|
|
hw->irq);
|
|
return err;
|
|
}
|
|
|
|
hw->trig = devm_iio_trigger_alloc(dev, "%s-trigger",
|
|
iio_dev->name);
|
|
if (!hw->trig)
|
|
return -ENOMEM;
|
|
|
|
iio_trigger_set_drvdata(hw->trig, iio_dev);
|
|
hw->trig->dev.parent = dev;
|
|
|
|
return devm_iio_trigger_register(dev, hw->trig);
|
|
}
|
|
|
|
static int st_uvis25_buffer_preenable(struct iio_dev *iio_dev)
|
|
{
|
|
return st_uvis25_set_enable(iio_priv(iio_dev), true);
|
|
}
|
|
|
|
static int st_uvis25_buffer_postdisable(struct iio_dev *iio_dev)
|
|
{
|
|
return st_uvis25_set_enable(iio_priv(iio_dev), false);
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops st_uvis25_buffer_ops = {
|
|
.preenable = st_uvis25_buffer_preenable,
|
|
.postenable = iio_triggered_buffer_postenable,
|
|
.predisable = iio_triggered_buffer_predisable,
|
|
.postdisable = st_uvis25_buffer_postdisable,
|
|
};
|
|
|
|
static irqreturn_t st_uvis25_buffer_handler_thread(int irq, void *p)
|
|
{
|
|
u8 buffer[ALIGN(sizeof(u8), sizeof(s64)) + sizeof(s64)];
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *iio_dev = pf->indio_dev;
|
|
struct st_uvis25_hw *hw = iio_priv(iio_dev);
|
|
int err;
|
|
|
|
err = regmap_read(hw->regmap, ST_UVIS25_REG_OUT_ADDR, (int *)buffer);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
iio_push_to_buffers_with_timestamp(iio_dev, buffer,
|
|
iio_get_time_ns(iio_dev));
|
|
|
|
out:
|
|
iio_trigger_notify_done(hw->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int st_uvis25_allocate_buffer(struct iio_dev *iio_dev)
|
|
{
|
|
struct st_uvis25_hw *hw = iio_priv(iio_dev);
|
|
|
|
return devm_iio_triggered_buffer_setup(regmap_get_device(hw->regmap),
|
|
iio_dev, NULL,
|
|
st_uvis25_buffer_handler_thread,
|
|
&st_uvis25_buffer_ops);
|
|
}
|
|
|
|
static const struct iio_info st_uvis25_info = {
|
|
.read_raw = st_uvis25_read_raw,
|
|
};
|
|
|
|
static int st_uvis25_init_sensor(struct st_uvis25_hw *hw)
|
|
{
|
|
int err;
|
|
|
|
err = regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL2_ADDR,
|
|
ST_UVIS25_REG_BOOT_MASK, 1);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
msleep(2000);
|
|
|
|
return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR,
|
|
ST_UVIS25_REG_BDU_MASK, 1);
|
|
}
|
|
|
|
int st_uvis25_probe(struct device *dev, int irq, struct regmap *regmap)
|
|
{
|
|
struct st_uvis25_hw *hw;
|
|
struct iio_dev *iio_dev;
|
|
int err;
|
|
|
|
iio_dev = devm_iio_device_alloc(dev, sizeof(*hw));
|
|
if (!iio_dev)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(dev, (void *)iio_dev);
|
|
|
|
hw = iio_priv(iio_dev);
|
|
hw->irq = irq;
|
|
hw->regmap = regmap;
|
|
|
|
err = st_uvis25_check_whoami(hw);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
iio_dev->modes = INDIO_DIRECT_MODE;
|
|
iio_dev->dev.parent = dev;
|
|
iio_dev->channels = st_uvis25_channels;
|
|
iio_dev->num_channels = ARRAY_SIZE(st_uvis25_channels);
|
|
iio_dev->name = ST_UVIS25_DEV_NAME;
|
|
iio_dev->info = &st_uvis25_info;
|
|
|
|
err = st_uvis25_init_sensor(hw);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (hw->irq > 0) {
|
|
err = st_uvis25_allocate_buffer(iio_dev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = st_uvis25_allocate_trigger(iio_dev);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return devm_iio_device_register(dev, iio_dev);
|
|
}
|
|
EXPORT_SYMBOL(st_uvis25_probe);
|
|
|
|
static int __maybe_unused st_uvis25_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *iio_dev = dev_get_drvdata(dev);
|
|
struct st_uvis25_hw *hw = iio_priv(iio_dev);
|
|
|
|
return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR,
|
|
ST_UVIS25_REG_ODR_MASK, 0);
|
|
}
|
|
|
|
static int __maybe_unused st_uvis25_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *iio_dev = dev_get_drvdata(dev);
|
|
struct st_uvis25_hw *hw = iio_priv(iio_dev);
|
|
|
|
if (hw->enabled)
|
|
return regmap_update_bits(hw->regmap, ST_UVIS25_REG_CTRL1_ADDR,
|
|
ST_UVIS25_REG_ODR_MASK, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct dev_pm_ops st_uvis25_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(st_uvis25_suspend, st_uvis25_resume)
|
|
};
|
|
EXPORT_SYMBOL(st_uvis25_pm_ops);
|
|
|
|
MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>");
|
|
MODULE_DESCRIPTION("STMicroelectronics uvis25 sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|