microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/media/dvb-frontends/lgdt330x.c

826 строки
22 KiB
C
Исходник Ответственный История

/*
* Support for LGDT3302 and LGDT3303 - VSB/QAM
*
* Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
/*
* NOTES ABOUT THIS DRIVER
*
* This Linux driver supports:
* DViCO FusionHDTV 3 Gold-Q
* DViCO FusionHDTV 3 Gold-T
* DViCO FusionHDTV 5 Gold
* DViCO FusionHDTV 5 Lite
* DViCO FusionHDTV 5 USB Gold
* Air2PC/AirStar 2 ATSC 3rd generation (HD5000)
* pcHDTV HD5500
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include "dvb_frontend.h"
#include "dvb_math.h"
#include "lgdt330x_priv.h"
#include "lgdt330x.h"
/* Use Equalizer Mean Squared Error instead of Phaser Tracker MSE */
/* #define USE_EQMSE */
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug,"Turn on/off lgdt330x frontend debugging (default:off).");
#define dprintk(args...) \
do { \
if (debug) printk(KERN_DEBUG "lgdt330x: " args); \
} while (0)
struct lgdt330x_state
{
struct i2c_adapter* i2c;
/* Configuration settings */
const struct lgdt330x_config* config;
struct dvb_frontend frontend;
/* Demodulator private data */
fe_modulation_t current_modulation;
u32 snr; /* Result of last SNR calculation */
/* Tuner private data */
u32 current_frequency;
};
static int i2c_write_demod_bytes (struct lgdt330x_state* state,
u8 *buf, /* data bytes to send */
int len /* number of bytes to send */ )
{
struct i2c_msg msg =
{ .addr = state->config->demod_address,
.flags = 0,
.buf = buf,
.len = 2 };
int i;
int err;
for (i=0; i<len-1; i+=2){
if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) {
printk(KERN_WARNING "lgdt330x: %s error (addr %02x <- %02x, err = %i)\n", __func__, msg.buf[0], msg.buf[1], err);
if (err < 0)
return err;
else
return -EREMOTEIO;
}
msg.buf += 2;
}
return 0;
}
/*
* This routine writes the register (reg) to the demod bus
* then reads the data returned for (len) bytes.
*/
static int i2c_read_demod_bytes(struct lgdt330x_state *state,
enum I2C_REG reg, u8 *buf, int len)
{
u8 wr [] = { reg };
struct i2c_msg msg [] = {
{ .addr = state->config->demod_address,
.flags = 0, .buf = wr, .len = 1 },
{ .addr = state->config->demod_address,
.flags = I2C_M_RD, .buf = buf, .len = len },
};
int ret;
ret = i2c_transfer(state->i2c, msg, 2);
if (ret != 2) {
printk(KERN_WARNING "lgdt330x: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __func__, state->config->demod_address, reg, ret);
if (ret >= 0)
ret = -EIO;
} else {
ret = 0;
}
return ret;
}
/* Software reset */
static int lgdt3302_SwReset(struct lgdt330x_state* state)
{
u8 ret;
u8 reset[] = {
IRQ_MASK,
0x00 /* bit 6 is active low software reset
* bits 5-0 are 1 to mask interrupts */
};
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
if (ret == 0) {
/* force reset high (inactive) and unmask interrupts */
reset[1] = 0x7f;
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
}
return ret;
}
static int lgdt3303_SwReset(struct lgdt330x_state* state)
{
u8 ret;
u8 reset[] = {
0x02,
0x00 /* bit 0 is active low software reset */
};
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
if (ret == 0) {
/* force reset high (inactive) */
reset[1] = 0x01;
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
}
return ret;
}
static int lgdt330x_SwReset(struct lgdt330x_state* state)
{
switch (state->config->demod_chip) {
case LGDT3302:
return lgdt3302_SwReset(state);
case LGDT3303:
return lgdt3303_SwReset(state);
default:
return -ENODEV;
}
}
static int lgdt330x_init(struct dvb_frontend* fe)
{
/* Hardware reset is done using gpio[0] of cx23880x chip.
* I'd like to do it here, but don't know how to find chip address.
* cx88-cards.c arranges for the reset bit to be inactive (high).
* Maybe there needs to be a callable function in cx88-core or
* the caller of this function needs to do it. */
/*
* Array of byte pairs <address, value>
* to initialize each different chip
*/
static u8 lgdt3302_init_data[] = {
/* Use 50MHz parameter values from spec sheet since xtal is 50 */
/* Change the value of NCOCTFV[25:0] of carrier
recovery center frequency register */
VSB_CARRIER_FREQ0, 0x00,
VSB_CARRIER_FREQ1, 0x87,
VSB_CARRIER_FREQ2, 0x8e,
VSB_CARRIER_FREQ3, 0x01,
/* Change the TPCLK pin polarity
data is valid on falling clock */
DEMUX_CONTROL, 0xfb,
/* Change the value of IFBW[11:0] of
AGC IF/RF loop filter bandwidth register */
AGC_RF_BANDWIDTH0, 0x40,
AGC_RF_BANDWIDTH1, 0x93,
AGC_RF_BANDWIDTH2, 0x00,
/* Change the value of bit 6, 'nINAGCBY' and
'NSSEL[1:0] of ACG function control register 2 */
AGC_FUNC_CTRL2, 0xc6,
/* Change the value of bit 6 'RFFIX'
of AGC function control register 3 */
AGC_FUNC_CTRL3, 0x40,
/* Set the value of 'INLVTHD' register 0x2a/0x2c
to 0x7fe */
AGC_DELAY0, 0x07,
AGC_DELAY2, 0xfe,
/* Change the value of IAGCBW[15:8]
of inner AGC loop filter bandwidth */
AGC_LOOP_BANDWIDTH0, 0x08,
AGC_LOOP_BANDWIDTH1, 0x9a
};
static u8 lgdt3303_init_data[] = {
0x4c, 0x14
};
static u8 flip_1_lgdt3303_init_data[] = {
0x4c, 0x14,
0x87, 0xf3
};
static u8 flip_2_lgdt3303_init_data[] = {
0x4c, 0x14,
0x87, 0xda
};
struct lgdt330x_state* state = fe->demodulator_priv;
char *chip_name;
int err;
switch (state->config->demod_chip) {
case LGDT3302:
chip_name = "LGDT3302";
err = i2c_write_demod_bytes(state, lgdt3302_init_data,
sizeof(lgdt3302_init_data));
break;
case LGDT3303:
chip_name = "LGDT3303";
switch (state->config->clock_polarity_flip) {
case 2:
err = i2c_write_demod_bytes(state,
flip_2_lgdt3303_init_data,
sizeof(flip_2_lgdt3303_init_data));
break;
case 1:
err = i2c_write_demod_bytes(state,
flip_1_lgdt3303_init_data,
sizeof(flip_1_lgdt3303_init_data));
break;
case 0:
default:
err = i2c_write_demod_bytes(state, lgdt3303_init_data,
sizeof(lgdt3303_init_data));
}
break;
default:
chip_name = "undefined";
printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n");
err = -ENODEV;
}
dprintk("%s entered as %s\n", __func__, chip_name);
if (err < 0)
return err;
return lgdt330x_SwReset(state);
}
static int lgdt330x_read_ber(struct dvb_frontend* fe, u32* ber)
{
*ber = 0; /* Not supplied by the demod chips */
return 0;
}
static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
{
struct lgdt330x_state* state = fe->demodulator_priv;
int err;
u8 buf[2];
*ucblocks = 0;
switch (state->config->demod_chip) {
case LGDT3302:
err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1,
buf, sizeof(buf));
break;
case LGDT3303:
err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1,
buf, sizeof(buf));
break;
default:
printk(KERN_WARNING
"Only LGDT3302 and LGDT3303 are supported chips.\n");
err = -ENODEV;
}
if (err < 0)
return err;
*ucblocks = (buf[0] << 8) | buf[1];
return 0;
}
static int lgdt330x_set_parameters(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
/*
* Array of byte pairs <address, value>
* to initialize 8VSB for lgdt3303 chip 50 MHz IF
*/
static u8 lgdt3303_8vsb_44_data[] = {
0x04, 0x00,
0x0d, 0x40,
0x0e, 0x87,
0x0f, 0x8e,
0x10, 0x01,
0x47, 0x8b };
/*
* Array of byte pairs <address, value>
* to initialize QAM for lgdt3303 chip
*/
static u8 lgdt3303_qam_data[] = {
0x04, 0x00,
0x0d, 0x00,
0x0e, 0x00,
0x0f, 0x00,
0x10, 0x00,
0x51, 0x63,
0x47, 0x66,
0x48, 0x66,
0x4d, 0x1a,
0x49, 0x08,
0x4a, 0x9b };
struct lgdt330x_state* state = fe->demodulator_priv;
static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 };
int err = 0;
/* Change only if we are actually changing the modulation */
if (state->current_modulation != p->modulation) {
switch (p->modulation) {
case VSB_8:
dprintk("%s: VSB_8 MODE\n", __func__);
/* Select VSB mode */
top_ctrl_cfg[1] = 0x03;
/* Select ANT connector if supported by card */
if (state->config->pll_rf_set)
state->config->pll_rf_set(fe, 1);
if (state->config->demod_chip == LGDT3303) {
err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data,
sizeof(lgdt3303_8vsb_44_data));
}
break;
case QAM_64:
dprintk("%s: QAM_64 MODE\n", __func__);
/* Select QAM_64 mode */
top_ctrl_cfg[1] = 0x00;
/* Select CABLE connector if supported by card */
if (state->config->pll_rf_set)
state->config->pll_rf_set(fe, 0);
if (state->config->demod_chip == LGDT3303) {
err = i2c_write_demod_bytes(state, lgdt3303_qam_data,
sizeof(lgdt3303_qam_data));
}
break;
case QAM_256:
dprintk("%s: QAM_256 MODE\n", __func__);
/* Select QAM_256 mode */
top_ctrl_cfg[1] = 0x01;
/* Select CABLE connector if supported by card */
if (state->config->pll_rf_set)
state->config->pll_rf_set(fe, 0);
if (state->config->demod_chip == LGDT3303) {
err = i2c_write_demod_bytes(state, lgdt3303_qam_data,
sizeof(lgdt3303_qam_data));
}
break;
default:
printk(KERN_WARNING "lgdt330x: %s: Modulation type(%d) UNSUPPORTED\n", __func__, p->modulation);
return -1;
}
if (err < 0)
printk(KERN_WARNING "lgdt330x: %s: error blasting "
"bytes to lgdt3303 for modulation type(%d)\n",
__func__, p->modulation);
/*
* select serial or parallel MPEG harware interface
* Serial: 0x04 for LGDT3302 or 0x40 for LGDT3303
* Parallel: 0x00
*/
top_ctrl_cfg[1] |= state->config->serial_mpeg;
/* Select the requested mode */
i2c_write_demod_bytes(state, top_ctrl_cfg,
sizeof(top_ctrl_cfg));
if (state->config->set_ts_params)
state->config->set_ts_params(fe, 0);
state->current_modulation = p->modulation;
}
/* Tune to the specified frequency */
if (fe->ops.tuner_ops.set_params) {
fe->ops.tuner_ops.set_params(fe);
if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
}
/* Keep track of the new frequency */
/* FIXME this is the wrong way to do this... */
/* The tuner is shared with the video4linux analog API */
state->current_frequency = p->frequency;
lgdt330x_SwReset(state);
return 0;
}
static int lgdt330x_get_frontend(struct dvb_frontend *fe)
{
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
struct lgdt330x_state *state = fe->demodulator_priv;
p->frequency = state->current_frequency;
return 0;
}
static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
struct lgdt330x_state* state = fe->demodulator_priv;
u8 buf[3];
*status = 0; /* Reset status result */
/* AGC status register */
i2c_read_demod_bytes(state, AGC_STATUS, buf, 1);
dprintk("%s: AGC_STATUS = 0x%02x\n", __func__, buf[0]);
if ((buf[0] & 0x0c) == 0x8){
/* Test signal does not exist flag */
/* as well as the AGC lock flag. */
*status |= FE_HAS_SIGNAL;
}
/*
* You must set the Mask bits to 1 in the IRQ_MASK in order
* to see that status bit in the IRQ_STATUS register.
* This is done in SwReset();
*/
/* signal status */
i2c_read_demod_bytes(state, TOP_CONTROL, buf, sizeof(buf));
dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __func__, buf[0], buf[1], buf[2]);
/* sync status */
if ((buf[2] & 0x03) == 0x01) {
*status |= FE_HAS_SYNC;
}
/* FEC error status */
if ((buf[2] & 0x0c) == 0x08) {
*status |= FE_HAS_LOCK;
*status |= FE_HAS_VITERBI;
}
/* Carrier Recovery Lock Status Register */
i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
dprintk("%s: CARRIER_LOCK = 0x%02x\n", __func__, buf[0]);
switch (state->current_modulation) {
case QAM_256:
case QAM_64:
/* Need to understand why there are 3 lock levels here */
if ((buf[0] & 0x07) == 0x07)
*status |= FE_HAS_CARRIER;
break;
case VSB_8:
if ((buf[0] & 0x80) == 0x80)
*status |= FE_HAS_CARRIER;
break;
default:
printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __func__);
}
return 0;
}
static int lgdt3303_read_status(struct dvb_frontend* fe, fe_status_t* status)
{
struct lgdt330x_state* state = fe->demodulator_priv;
int err;
u8 buf[3];
*status = 0; /* Reset status result */
/* lgdt3303 AGC status register */
err = i2c_read_demod_bytes(state, 0x58, buf, 1);
if (err < 0)
return err;
dprintk("%s: AGC_STATUS = 0x%02x\n", __func__, buf[0]);
if ((buf[0] & 0x21) == 0x01){
/* Test input signal does not exist flag */
/* as well as the AGC lock flag. */
*status |= FE_HAS_SIGNAL;
}
/* Carrier Recovery Lock Status Register */
i2c_read_demod_bytes(state, CARRIER_LOCK, buf, 1);
dprintk("%s: CARRIER_LOCK = 0x%02x\n", __func__, buf[0]);
switch (state->current_modulation) {
case QAM_256:
case QAM_64:
/* Need to understand why there are 3 lock levels here */
if ((buf[0] & 0x07) == 0x07)
*status |= FE_HAS_CARRIER;
else
break;
i2c_read_demod_bytes(state, 0x8a, buf, 1);
if ((buf[0] & 0x04) == 0x04)
*status |= FE_HAS_SYNC;
if ((buf[0] & 0x01) == 0x01)
*status |= FE_HAS_LOCK;
if ((buf[0] & 0x08) == 0x08)
*status |= FE_HAS_VITERBI;
break;
case VSB_8:
if ((buf[0] & 0x80) == 0x80)
*status |= FE_HAS_CARRIER;
else
break;
i2c_read_demod_bytes(state, 0x38, buf, 1);
if ((buf[0] & 0x02) == 0x00)
*status |= FE_HAS_SYNC;
if ((buf[0] & 0x01) == 0x01) {
*status |= FE_HAS_LOCK;
*status |= FE_HAS_VITERBI;
}
break;
default:
printk(KERN_WARNING "lgdt330x: %s: Modulation set to unsupported value\n", __func__);
}
return 0;
}
/* Calculate SNR estimation (scaled by 2^24)
8-VSB SNR equations from LGDT3302 and LGDT3303 datasheets, QAM
equations from LGDT3303 datasheet. VSB is the same between the '02
and '03, so maybe QAM is too? Perhaps someone with a newer datasheet
that has QAM information could verify?
For 8-VSB: (two ways, take your pick)
LGDT3302:
SNR_EQ = 10 * log10(25 * 24^2 / EQ_MSE)
LGDT3303:
SNR_EQ = 10 * log10(25 * 32^2 / EQ_MSE)
LGDT3302 & LGDT3303:
SNR_PT = 10 * log10(25 * 32^2 / PT_MSE) (we use this one)
For 64-QAM:
SNR = 10 * log10( 688128 / MSEQAM)
For 256-QAM:
SNR = 10 * log10( 696320 / MSEQAM)
We re-write the snr equation as:
SNR * 2^24 = 10*(c - intlog10(MSE))
Where for 256-QAM, c = log10(696320) * 2^24, and so on. */
static u32 calculate_snr(u32 mse, u32 c)
{
if (mse == 0) /* No signal */
return 0;
mse = intlog10(mse);
if (mse > c) {
/* Negative SNR, which is possible, but realisticly the
demod will lose lock before the signal gets this bad. The
API only allows for unsigned values, so just return 0 */
return 0;
}
return 10*(c - mse);
}
static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr)
{
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
u8 buf[5]; /* read data buffer */
u32 noise; /* noise value */
u32 c; /* per-modulation SNR calculation constant */
switch(state->current_modulation) {
case VSB_8:
i2c_read_demod_bytes(state, LGDT3302_EQPH_ERR0, buf, 5);
#ifdef USE_EQMSE
/* Use Equalizer Mean-Square Error Register */
/* SNR for ranges from -15.61 to +41.58 */
noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2];
c = 69765745; /* log10(25*24^2)*2^24 */
#else
/* Use Phase Tracker Mean-Square Error Register */
/* SNR for ranges from -13.11 to +44.08 */
noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4];
c = 73957994; /* log10(25*32^2)*2^24 */
#endif
break;
case QAM_64:
case QAM_256:
i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
noise = ((buf[0] & 3) << 8) | buf[1];
c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
/* log10(688128)*2^24 and log10(696320)*2^24 */
break;
default:
printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
__func__);
return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
}
state->snr = calculate_snr(noise, c);
*snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise,
state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
return 0;
}
static int lgdt3303_read_snr(struct dvb_frontend* fe, u16* snr)
{
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
u8 buf[5]; /* read data buffer */
u32 noise; /* noise value */
u32 c; /* per-modulation SNR calculation constant */
switch(state->current_modulation) {
case VSB_8:
i2c_read_demod_bytes(state, LGDT3303_EQPH_ERR0, buf, 5);
#ifdef USE_EQMSE
/* Use Equalizer Mean-Square Error Register */
/* SNR for ranges from -16.12 to +44.08 */
noise = ((buf[0] & 0x78) << 13) | (buf[1] << 8) | buf[2];
c = 73957994; /* log10(25*32^2)*2^24 */
#else
/* Use Phase Tracker Mean-Square Error Register */
/* SNR for ranges from -13.11 to +44.08 */
noise = ((buf[0] & 7) << 16) | (buf[3] << 8) | buf[4];
c = 73957994; /* log10(25*32^2)*2^24 */
#endif
break;
case QAM_64:
case QAM_256:
i2c_read_demod_bytes(state, CARRIER_MSEQAM1, buf, 2);
noise = (buf[0] << 8) | buf[1];
c = state->current_modulation == QAM_64 ? 97939837 : 98026066;
/* log10(688128)*2^24 and log10(696320)*2^24 */
break;
default:
printk(KERN_ERR "lgdt330x: %s: Modulation set to unsupported value\n",
__func__);
return -EREMOTEIO; /* return -EDRIVER_IS_GIBBERED; */
}
state->snr = calculate_snr(noise, c);
*snr = (state->snr) >> 16; /* Convert from 8.24 fixed-point to 8.8 */
dprintk("%s: noise = 0x%08x, snr = %d.%02d dB\n", __func__, noise,
state->snr >> 24, (((state->snr >> 8) & 0xffff) * 100) >> 16);
return 0;
}
static int lgdt330x_read_signal_strength(struct dvb_frontend* fe, u16* strength)
{
/* Calculate Strength from SNR up to 35dB */
/* Even though the SNR can go higher than 35dB, there is some comfort */
/* factor in having a range of strong signals that can show at 100% */
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
u16 snr;
int ret;
ret = fe->ops.read_snr(fe, &snr);
if (ret != 0)
return ret;
/* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
/* scale the range 0 - 35*2^24 into 0 - 65535 */
if (state->snr >= 8960 * 0x10000)
*strength = 0xffff;
else
*strength = state->snr / 8960;
return 0;
}
static int lgdt330x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings)
{
/* I have no idea about this - it may not be needed */
fe_tune_settings->min_delay_ms = 500;
fe_tune_settings->step_size = 0;
fe_tune_settings->max_drift = 0;
return 0;
}
static void lgdt330x_release(struct dvb_frontend* fe)
{
struct lgdt330x_state* state = (struct lgdt330x_state*) fe->demodulator_priv;
kfree(state);
}
static struct dvb_frontend_ops lgdt3302_ops;
static struct dvb_frontend_ops lgdt3303_ops;
struct dvb_frontend* lgdt330x_attach(const struct lgdt330x_config* config,
struct i2c_adapter* i2c)
{
struct lgdt330x_state* state = NULL;
u8 buf[1];
/* Allocate memory for the internal state */
state = kzalloc(sizeof(struct lgdt330x_state), GFP_KERNEL);
if (state == NULL)
goto error;
/* Setup the state */
state->config = config;
state->i2c = i2c;
/* Create dvb_frontend */
switch (config->demod_chip) {
case LGDT3302:
memcpy(&state->frontend.ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops));
break;
case LGDT3303:
memcpy(&state->frontend.ops, &lgdt3303_ops, sizeof(struct dvb_frontend_ops));
break;
default:
goto error;
}
state->frontend.demodulator_priv = state;
/* Verify communication with demod chip */
if (i2c_read_demod_bytes(state, 2, buf, 1))
goto error;
state->current_frequency = -1;
state->current_modulation = -1;
return &state->frontend;
error:
kfree(state);
dprintk("%s: ERROR\n",__func__);
return NULL;
}
static struct dvb_frontend_ops lgdt3302_ops = {
.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
.info = {
.name= "LG Electronics LGDT3302 VSB/QAM Frontend",
.frequency_min= 54000000,
.frequency_max= 858000000,
.frequency_stepsize= 62500,
.symbol_rate_min = 5056941, /* QAM 64 */
.symbol_rate_max = 10762000, /* VSB 8 */
.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
},
.init = lgdt330x_init,
.set_frontend = lgdt330x_set_parameters,
.get_frontend = lgdt330x_get_frontend,
.get_tune_settings = lgdt330x_get_tune_settings,
.read_status = lgdt3302_read_status,
.read_ber = lgdt330x_read_ber,
.read_signal_strength = lgdt330x_read_signal_strength,
.read_snr = lgdt3302_read_snr,
.read_ucblocks = lgdt330x_read_ucblocks,
.release = lgdt330x_release,
};
static struct dvb_frontend_ops lgdt3303_ops = {
.delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
.info = {
.name= "LG Electronics LGDT3303 VSB/QAM Frontend",
.frequency_min= 54000000,
.frequency_max= 858000000,
.frequency_stepsize= 62500,
.symbol_rate_min = 5056941, /* QAM 64 */
.symbol_rate_max = 10762000, /* VSB 8 */
.caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB
},
.init = lgdt330x_init,
.set_frontend = lgdt330x_set_parameters,
.get_frontend = lgdt330x_get_frontend,
.get_tune_settings = lgdt330x_get_tune_settings,
.read_status = lgdt3303_read_status,
.read_ber = lgdt330x_read_ber,
.read_signal_strength = lgdt330x_read_signal_strength,
.read_snr = lgdt3303_read_snr,
.read_ucblocks = lgdt330x_read_ucblocks,
.release = lgdt330x_release,
};
MODULE_DESCRIPTION("LGDT330X (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver");
MODULE_AUTHOR("Wilson Michaels");
MODULE_LICENSE("GPL");
EXPORT_SYMBOL(lgdt330x_attach);
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку