144 строки
5.5 KiB
Plaintext
144 строки
5.5 KiB
Plaintext
STMicroelectronics 10/100/1000 Synopsys Ethernet driver
|
|
|
|
Copyright (C) 2007-2010 STMicroelectronics Ltd
|
|
Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
|
|
|
This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers
|
|
(Synopsys IP blocks); it has been fully tested on STLinux platforms.
|
|
|
|
Currently this network device driver is for all STM embedded MAC/GMAC
|
|
(7xxx SoCs).
|
|
|
|
DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100
|
|
Universal version 4.0 have been used for developing the first code
|
|
implementation.
|
|
|
|
Please, for more information also visit: www.stlinux.com
|
|
|
|
1) Kernel Configuration
|
|
The kernel configuration option is STMMAC_ETH:
|
|
Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) --->
|
|
STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH)
|
|
|
|
2) Driver parameters list:
|
|
debug: message level (0: no output, 16: all);
|
|
phyaddr: to manually provide the physical address to the PHY device;
|
|
dma_rxsize: DMA rx ring size;
|
|
dma_txsize: DMA tx ring size;
|
|
buf_sz: DMA buffer size;
|
|
tc: control the HW FIFO threshold;
|
|
tx_coe: Enable/Disable Tx Checksum Offload engine;
|
|
watchdog: transmit timeout (in milliseconds);
|
|
flow_ctrl: Flow control ability [on/off];
|
|
pause: Flow Control Pause Time;
|
|
tmrate: timer period (only if timer optimisation is configured).
|
|
|
|
3) Command line options
|
|
Driver parameters can be also passed in command line by using:
|
|
stmmaceth=dma_rxsize:128,dma_txsize:512
|
|
|
|
4) Driver information and notes
|
|
|
|
4.1) Transmit process
|
|
The xmit method is invoked when the kernel needs to transmit a packet; it sets
|
|
the descriptors in the ring and informs the DMA engine that there is a packet
|
|
ready to be transmitted.
|
|
Once the controller has finished transmitting the packet, an interrupt is
|
|
triggered; So the driver will be able to release the socket buffers.
|
|
By default, the driver sets the NETIF_F_SG bit in the features field of the
|
|
net_device structure enabling the scatter/gather feature.
|
|
|
|
4.2) Receive process
|
|
When one or more packets are received, an interrupt happens. The interrupts
|
|
are not queued so the driver has to scan all the descriptors in the ring during
|
|
the receive process.
|
|
This is based on NAPI so the interrupt handler signals only if there is work to be
|
|
done, and it exits.
|
|
Then the poll method will be scheduled at some future point.
|
|
The incoming packets are stored, by the DMA, in a list of pre-allocated socket
|
|
buffers in order to avoid the memcpy (Zero-copy).
|
|
|
|
4.3) Timer-Driver Interrupt
|
|
Instead of having the device that asynchronously notifies the frame receptions, the
|
|
driver configures a timer to generate an interrupt at regular intervals.
|
|
Based on the granularity of the timer, the frames that are received by the device
|
|
will experience different levels of latency. Some NICs have dedicated timer
|
|
device to perform this task. STMMAC can use either the RTC device or the TMU
|
|
channel 2 on STLinux platforms.
|
|
The timers frequency can be passed to the driver as parameter; when change it,
|
|
take care of both hardware capability and network stability/performance impact.
|
|
Several performance tests on STM platforms showed this optimisation allows to spare
|
|
the CPU while having the maximum throughput.
|
|
|
|
4.4) WOL
|
|
Wake up on Lan feature through Magic Frame is only supported for the GMAC
|
|
core.
|
|
|
|
4.5) DMA descriptors
|
|
Driver handles both normal and enhanced descriptors. The latter has been only
|
|
tested on DWC Ether MAC 10/100/1000 Universal version 3.41a.
|
|
|
|
4.6) Ethtool support
|
|
Ethtool is supported. Driver statistics and internal errors can be taken using:
|
|
ethtool -S ethX command. It is possible to dump registers etc.
|
|
|
|
4.7) Jumbo and Segmentation Offloading
|
|
Jumbo frames are supported and tested for the GMAC.
|
|
The GSO has been also added but it's performed in software.
|
|
LRO is not supported.
|
|
|
|
4.8) Physical
|
|
The driver is compatible with PAL to work with PHY and GPHY devices.
|
|
|
|
4.9) Platform information
|
|
Several information came from the platform; please refer to the
|
|
driver's Header file in include/linux directory.
|
|
|
|
struct plat_stmmacenet_data {
|
|
int bus_id;
|
|
int pbl;
|
|
int has_gmac;
|
|
void (*fix_mac_speed)(void *priv, unsigned int speed);
|
|
void (*bus_setup)(unsigned long ioaddr);
|
|
#ifdef CONFIG_STM_DRIVERS
|
|
struct stm_pad_config *pad_config;
|
|
#endif
|
|
void *bsp_priv;
|
|
};
|
|
|
|
Where:
|
|
- pbl (Programmable Burst Length) is maximum number of
|
|
beats to be transferred in one DMA transaction.
|
|
GMAC also enables the 4xPBL by default.
|
|
- fix_mac_speed and bus_setup are used to configure internal target
|
|
registers (on STM platforms);
|
|
- has_gmac: GMAC core is on board (get it at run-time in the next step);
|
|
- bus_id: bus identifier.
|
|
|
|
struct plat_stmmacphy_data {
|
|
int bus_id;
|
|
int phy_addr;
|
|
unsigned int phy_mask;
|
|
int interface;
|
|
int (*phy_reset)(void *priv);
|
|
void *priv;
|
|
};
|
|
|
|
Where:
|
|
- bus_id: bus identifier;
|
|
- phy_addr: physical address used for the attached phy device;
|
|
set it to -1 to get it at run-time;
|
|
- interface: physical MII interface mode;
|
|
- phy_reset: hook to reset HW function.
|
|
|
|
TODO:
|
|
- Continue to make the driver more generic and suitable for other Synopsys
|
|
Ethernet controllers used on other architectures (i.e. ARM).
|
|
- 10G controllers are not supported.
|
|
- MAC uses Normal descriptors and GMAC uses enhanced ones.
|
|
This is a limit that should be reviewed. MAC could want to
|
|
use the enhanced structure.
|
|
- Checksumming: Rx/Tx csum is done in HW in case of GMAC only.
|
|
- Review the timer optimisation code to use an embedded device that seems to be
|
|
available in new chip generations.
|