WSL2-Linux-Kernel/drivers/s390/cio/css.h

200 строки
6.0 KiB
C

#ifndef _CSS_H
#define _CSS_H
#include <linux/mutex.h>
#include <linux/wait.h>
#include <linux/workqueue.h>
#include <asm/cio.h>
#include "schid.h"
/*
* path grouping stuff
*/
#define SPID_FUNC_SINGLE_PATH 0x00
#define SPID_FUNC_MULTI_PATH 0x80
#define SPID_FUNC_ESTABLISH 0x00
#define SPID_FUNC_RESIGN 0x40
#define SPID_FUNC_DISBAND 0x20
#define SNID_STATE1_RESET 0
#define SNID_STATE1_UNGROUPED 2
#define SNID_STATE1_GROUPED 3
#define SNID_STATE2_NOT_RESVD 0
#define SNID_STATE2_RESVD_ELSE 2
#define SNID_STATE2_RESVD_SELF 3
#define SNID_STATE3_MULTI_PATH 1
#define SNID_STATE3_SINGLE_PATH 0
struct path_state {
__u8 state1 : 2; /* path state value 1 */
__u8 state2 : 2; /* path state value 2 */
__u8 state3 : 1; /* path state value 3 */
__u8 resvd : 3; /* reserved */
} __attribute__ ((packed));
struct extended_cssid {
u8 version;
u8 cssid;
} __attribute__ ((packed));
struct pgid {
union {
__u8 fc; /* SPID function code */
struct path_state ps; /* SNID path state */
} __attribute__ ((packed)) inf;
union {
__u32 cpu_addr : 16; /* CPU address */
struct extended_cssid ext_cssid;
} __attribute__ ((packed)) pgid_high;
__u32 cpu_id : 24; /* CPU identification */
__u32 cpu_model : 16; /* CPU model */
__u32 tod_high; /* high word TOD clock */
} __attribute__ ((packed));
#define MAX_CIWS 8
/*
* sense-id response buffer layout
*/
struct senseid {
/* common part */
__u8 reserved; /* always 0x'FF' */
__u16 cu_type; /* control unit type */
__u8 cu_model; /* control unit model */
__u16 dev_type; /* device type */
__u8 dev_model; /* device model */
__u8 unused; /* padding byte */
/* extended part */
struct ciw ciw[MAX_CIWS]; /* variable # of CIWs */
} __attribute__ ((packed,aligned(4)));
struct ccw_device_private {
struct ccw_device *cdev;
struct subchannel *sch;
int state; /* device state */
atomic_t onoff;
unsigned long registered;
struct ccw_dev_id dev_id; /* device id */
struct subchannel_id schid; /* subchannel number */
__u8 imask; /* lpm mask for SNID/SID/SPGID */
int iretry; /* retry counter SNID/SID/SPGID */
struct {
unsigned int fast:1; /* post with "channel end" */
unsigned int repall:1; /* report every interrupt status */
unsigned int pgroup:1; /* do path grouping */
unsigned int force:1; /* allow forced online */
} __attribute__ ((packed)) options;
struct {
unsigned int pgid_single:1; /* use single path for Set PGID */
unsigned int esid:1; /* Ext. SenseID supported by HW */
unsigned int dosense:1; /* delayed SENSE required */
unsigned int doverify:1; /* delayed path verification */
unsigned int donotify:1; /* call notify function */
unsigned int recog_done:1; /* dev. recog. complete */
unsigned int fake_irb:1; /* deliver faked irb */
unsigned int intretry:1; /* retry internal operation */
} __attribute__((packed)) flags;
unsigned long intparm; /* user interruption parameter */
struct qdio_irq *qdio_data;
struct irb irb; /* device status */
struct senseid senseid; /* SenseID info */
struct pgid pgid[8]; /* path group IDs per chpid*/
struct ccw1 iccws[2]; /* ccws for SNID/SID/SPGID commands */
struct work_struct kick_work;
wait_queue_head_t wait_q;
struct timer_list timer;
void *cmb; /* measurement information */
struct list_head cmb_list; /* list of measured devices */
u64 cmb_start_time; /* clock value of cmb reset */
void *cmb_wait; /* deferred cmb enable/disable */
};
/*
* A css driver handles all subchannels of one type.
* Currently, we only care about I/O subchannels (type 0), these
* have a ccw_device connected to them.
*/
struct subchannel;
struct css_driver {
unsigned int subchannel_type;
struct device_driver drv;
void (*irq)(struct device *);
int (*notify)(struct device *, int);
void (*verify)(struct device *);
void (*termination)(struct device *);
int (*probe)(struct subchannel *);
int (*remove)(struct subchannel *);
void (*shutdown)(struct subchannel *);
};
/*
* all css_drivers have the css_bus_type
*/
extern struct bus_type css_bus_type;
extern struct css_driver io_subchannel_driver;
extern int css_probe_device(struct subchannel_id);
extern int css_sch_device_register(struct subchannel *);
extern void css_sch_device_unregister(struct subchannel *);
extern struct subchannel * get_subchannel_by_schid(struct subchannel_id);
extern int css_init_done;
extern int for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *);
#define __MAX_SUBCHANNEL 65535
#define __MAX_SSID 3
#define __MAX_CHPID 255
#define __MAX_CSSID 0
struct channel_subsystem {
u8 cssid;
int valid;
struct channel_path *chps[__MAX_CHPID + 1];
struct device device;
struct pgid global_pgid;
struct mutex mutex;
/* channel measurement related */
int cm_enabled;
void *cub_addr1;
void *cub_addr2;
/* for orphaned ccw devices */
struct subchannel *pseudo_subchannel;
};
#define to_css(dev) container_of(dev, struct channel_subsystem, device)
extern struct bus_type css_bus_type;
extern struct channel_subsystem *css[];
/* Some helper functions for disconnected state. */
int device_is_disconnected(struct subchannel *);
void device_set_disconnected(struct subchannel *);
void device_trigger_reprobe(struct subchannel *);
/* Helper functions for vary on/off. */
int device_is_online(struct subchannel *);
void device_kill_io(struct subchannel *);
void device_set_intretry(struct subchannel *sch);
int device_trigger_verify(struct subchannel *sch);
/* Machine check helper function. */
void device_kill_pending_timer(struct subchannel *);
/* Helper functions to build lists for the slow path. */
extern int css_enqueue_subchannel_slow(struct subchannel_id schid);
void css_walk_subchannel_slow_list(void (*fn)(unsigned long));
void css_clear_subchannel_slow_list(void);
int css_slow_subchannels_exist(void);
extern int need_rescan;
int sch_is_pseudo_sch(struct subchannel *);
extern struct workqueue_struct *slow_path_wq;
extern struct work_struct slow_path_work;
int subchannel_add_files (struct device *);
extern struct attribute_group *subch_attr_groups[];
#endif