711 строки
19 KiB
C
711 строки
19 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
//
|
|
// Copyright (C) 2018 ROHM Semiconductors
|
|
//
|
|
// power-supply driver for ROHM BD70528 PMIC
|
|
|
|
/*
|
|
* BD70528 charger HW state machine.
|
|
*
|
|
* The thermal shutdown state is not drawn. From any other state but
|
|
* battery error and suspend it is possible to go to TSD/TMP states
|
|
* if temperature is out of bounds.
|
|
*
|
|
* CHG_RST = H
|
|
* or CHG_EN=L
|
|
* or (DCIN2_UVLO=L && DCIN1_UVLO=L)
|
|
* or (DCIN2_OVLO=H & DCIN1_UVKLO=L)
|
|
*
|
|
* +--------------+ +--------------+
|
|
* | | | |
|
|
* | Any state +-------> | Suspend |
|
|
* | | | |
|
|
* +--------------+ +------+-------+
|
|
* |
|
|
* CHG_EN = H && BAT_DET = H && |
|
|
* No errors (temp, bat_ov, UVLO, |
|
|
* OVLO...) |
|
|
* |
|
|
* BAT_OV or +---------v----------+
|
|
* (DBAT && TTRI) | |
|
|
* +-----------------+ Trickle Charge | <---------------+
|
|
* | | | |
|
|
* | +-------+------------+ |
|
|
* | | |
|
|
* | | ^ |
|
|
* | V_BAT > VTRI_TH | | VBAT < VTRI_TH - 50mV |
|
|
* | | | |
|
|
* | v | |
|
|
* | | |
|
|
* | BAT_OV or +----------+----+ |
|
|
* | (DBAT && TFST) | | |
|
|
* | +----------------+ Fast Charge | |
|
|
* | | | | |
|
|
* v v +----+----------+ |
|
|
* | |
|
|
*+----------------+ ILIM_DET=L | ^ ILIM_DET |
|
|
*| | & CV_DET=H | | or CV_DET=L |
|
|
*| Battery Error | & VBAT > | | or VBAT < VRECHG_TH |
|
|
*| | VRECHG_TH | | or IBAT > IFST/x |
|
|
*+----------------+ & IBAT < | | |
|
|
* IFST/x v | |
|
|
* ^ | |
|
|
* | +---------+-+ |
|
|
* | | | |
|
|
* +-------------------+ Top OFF | |
|
|
* BAT_OV = H or | | |
|
|
* (DBAT && TFST) +-----+-----+ |
|
|
* | |
|
|
* Stay top-off for 15s | |
|
|
* v |
|
|
* |
|
|
* +--------+ |
|
|
* | | |
|
|
* | Done +-------------------------+
|
|
* | |
|
|
* +--------+ VBAT < VRECHG_TH
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/mfd/rohm-bd70528.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/linear_range.h>
|
|
|
|
#define CHG_STAT_SUSPEND 0x0
|
|
#define CHG_STAT_TRICKLE 0x1
|
|
#define CHG_STAT_FAST 0x3
|
|
#define CHG_STAT_TOPOFF 0xe
|
|
#define CHG_STAT_DONE 0xf
|
|
#define CHG_STAT_OTP_TRICKLE 0x10
|
|
#define CHG_STAT_OTP_FAST 0x11
|
|
#define CHG_STAT_OTP_DONE 0x12
|
|
#define CHG_STAT_TSD_TRICKLE 0x20
|
|
#define CHG_STAT_TSD_FAST 0x21
|
|
#define CHG_STAT_TSD_TOPOFF 0x22
|
|
#define CHG_STAT_BAT_ERR 0x7f
|
|
|
|
static const char *bd70528_charger_model = "BD70528";
|
|
static const char *bd70528_charger_manufacturer = "ROHM Semiconductors";
|
|
|
|
#define BD_ERR_IRQ_HND(_name_, _wrn_) \
|
|
static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg) \
|
|
{ \
|
|
struct power_supply *psy = (struct power_supply *)arg; \
|
|
\
|
|
power_supply_changed(psy); \
|
|
dev_err(&psy->dev, (_wrn_)); \
|
|
\
|
|
return IRQ_HANDLED; \
|
|
}
|
|
|
|
#define BD_INFO_IRQ_HND(_name_, _wrn_) \
|
|
static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg) \
|
|
{ \
|
|
struct power_supply *psy = (struct power_supply *)arg; \
|
|
\
|
|
power_supply_changed(psy); \
|
|
dev_dbg(&psy->dev, (_wrn_)); \
|
|
\
|
|
return IRQ_HANDLED; \
|
|
}
|
|
|
|
#define BD_IRQ_HND(_name_) bd0528_##_name_##_interrupt
|
|
|
|
struct bd70528_psy {
|
|
struct regmap *regmap;
|
|
struct device *dev;
|
|
struct power_supply *psy;
|
|
};
|
|
|
|
BD_ERR_IRQ_HND(BAT_OV_DET, "Battery overvoltage detected\n");
|
|
BD_ERR_IRQ_HND(DBAT_DET, "Dead battery detected\n");
|
|
BD_ERR_IRQ_HND(COLD_DET, "Battery cold\n");
|
|
BD_ERR_IRQ_HND(HOT_DET, "Battery hot\n");
|
|
BD_ERR_IRQ_HND(CHG_TSD, "Charger thermal shutdown\n");
|
|
BD_ERR_IRQ_HND(DCIN2_OV_DET, "DCIN2 overvoltage detected\n");
|
|
|
|
BD_INFO_IRQ_HND(BAT_OV_RES, "Battery voltage back to normal\n");
|
|
BD_INFO_IRQ_HND(COLD_RES, "Battery temperature back to normal\n");
|
|
BD_INFO_IRQ_HND(HOT_RES, "Battery temperature back to normal\n");
|
|
BD_INFO_IRQ_HND(BAT_RMV, "Battery removed\n");
|
|
BD_INFO_IRQ_HND(BAT_DET, "Battery detected\n");
|
|
BD_INFO_IRQ_HND(DCIN2_OV_RES, "DCIN2 voltage back to normal\n");
|
|
BD_INFO_IRQ_HND(DCIN2_RMV, "DCIN2 removed\n");
|
|
BD_INFO_IRQ_HND(DCIN2_DET, "DCIN2 detected\n");
|
|
BD_INFO_IRQ_HND(DCIN1_RMV, "DCIN1 removed\n");
|
|
BD_INFO_IRQ_HND(DCIN1_DET, "DCIN1 detected\n");
|
|
|
|
struct irq_name_pair {
|
|
const char *n;
|
|
irqreturn_t (*h)(int irq, void *arg);
|
|
};
|
|
|
|
static int bd70528_get_irqs(struct platform_device *pdev,
|
|
struct bd70528_psy *bdpsy)
|
|
{
|
|
int irq, i, ret;
|
|
unsigned int mask;
|
|
static const struct irq_name_pair bd70528_chg_irqs[] = {
|
|
{ .n = "bd70528-bat-ov-res", .h = BD_IRQ_HND(BAT_OV_RES) },
|
|
{ .n = "bd70528-bat-ov-det", .h = BD_IRQ_HND(BAT_OV_DET) },
|
|
{ .n = "bd70528-bat-dead", .h = BD_IRQ_HND(DBAT_DET) },
|
|
{ .n = "bd70528-bat-warmed", .h = BD_IRQ_HND(COLD_RES) },
|
|
{ .n = "bd70528-bat-cold", .h = BD_IRQ_HND(COLD_DET) },
|
|
{ .n = "bd70528-bat-cooled", .h = BD_IRQ_HND(HOT_RES) },
|
|
{ .n = "bd70528-bat-hot", .h = BD_IRQ_HND(HOT_DET) },
|
|
{ .n = "bd70528-chg-tshd", .h = BD_IRQ_HND(CHG_TSD) },
|
|
{ .n = "bd70528-bat-removed", .h = BD_IRQ_HND(BAT_RMV) },
|
|
{ .n = "bd70528-bat-detected", .h = BD_IRQ_HND(BAT_DET) },
|
|
{ .n = "bd70528-dcin2-ov-res", .h = BD_IRQ_HND(DCIN2_OV_RES) },
|
|
{ .n = "bd70528-dcin2-ov-det", .h = BD_IRQ_HND(DCIN2_OV_DET) },
|
|
{ .n = "bd70528-dcin2-removed", .h = BD_IRQ_HND(DCIN2_RMV) },
|
|
{ .n = "bd70528-dcin2-detected", .h = BD_IRQ_HND(DCIN2_DET) },
|
|
{ .n = "bd70528-dcin1-removed", .h = BD_IRQ_HND(DCIN1_RMV) },
|
|
{ .n = "bd70528-dcin1-detected", .h = BD_IRQ_HND(DCIN1_DET) },
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bd70528_chg_irqs); i++) {
|
|
irq = platform_get_irq_byname(pdev, bd70528_chg_irqs[i].n);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "Bad IRQ information for %s (%d)\n",
|
|
bd70528_chg_irqs[i].n, irq);
|
|
return irq;
|
|
}
|
|
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
|
|
bd70528_chg_irqs[i].h,
|
|
IRQF_ONESHOT,
|
|
bd70528_chg_irqs[i].n,
|
|
bdpsy->psy);
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
/*
|
|
* BD70528 irq controller is not touching the main mask register.
|
|
* So enable the charger block interrupts at main level. We can just
|
|
* leave them enabled as irq-controller should disable irqs
|
|
* from sub-registers when IRQ is disabled or freed.
|
|
*/
|
|
mask = BD70528_REG_INT_BAT1_MASK | BD70528_REG_INT_BAT2_MASK;
|
|
ret = regmap_update_bits(bdpsy->regmap,
|
|
BD70528_REG_INT_MAIN_MASK, mask, 0);
|
|
if (ret)
|
|
dev_err(&pdev->dev, "Failed to enable charger IRQs\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bd70528_get_charger_status(struct bd70528_psy *bdpsy, int *val)
|
|
{
|
|
int ret;
|
|
unsigned int v;
|
|
|
|
ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CURR_STAT, &v);
|
|
if (ret) {
|
|
dev_err(bdpsy->dev, "Charger state read failure %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
switch (v & BD70528_MASK_CHG_STAT) {
|
|
case CHG_STAT_SUSPEND:
|
|
/* Maybe we should check the CHG_TTRI_EN? */
|
|
case CHG_STAT_OTP_TRICKLE:
|
|
case CHG_STAT_OTP_FAST:
|
|
case CHG_STAT_OTP_DONE:
|
|
case CHG_STAT_TSD_TRICKLE:
|
|
case CHG_STAT_TSD_FAST:
|
|
case CHG_STAT_TSD_TOPOFF:
|
|
case CHG_STAT_BAT_ERR:
|
|
*val = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
break;
|
|
case CHG_STAT_DONE:
|
|
*val = POWER_SUPPLY_STATUS_FULL;
|
|
break;
|
|
case CHG_STAT_TRICKLE:
|
|
case CHG_STAT_FAST:
|
|
case CHG_STAT_TOPOFF:
|
|
*val = POWER_SUPPLY_STATUS_CHARGING;
|
|
break;
|
|
default:
|
|
*val = POWER_SUPPLY_STATUS_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd70528_get_charge_type(struct bd70528_psy *bdpsy, int *val)
|
|
{
|
|
int ret;
|
|
unsigned int v;
|
|
|
|
ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CURR_STAT, &v);
|
|
if (ret) {
|
|
dev_err(bdpsy->dev, "Charger state read failure %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
switch (v & BD70528_MASK_CHG_STAT) {
|
|
case CHG_STAT_TRICKLE:
|
|
*val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
|
|
break;
|
|
case CHG_STAT_FAST:
|
|
case CHG_STAT_TOPOFF:
|
|
*val = POWER_SUPPLY_CHARGE_TYPE_FAST;
|
|
break;
|
|
case CHG_STAT_DONE:
|
|
case CHG_STAT_SUSPEND:
|
|
/* Maybe we should check the CHG_TTRI_EN? */
|
|
case CHG_STAT_OTP_TRICKLE:
|
|
case CHG_STAT_OTP_FAST:
|
|
case CHG_STAT_OTP_DONE:
|
|
case CHG_STAT_TSD_TRICKLE:
|
|
case CHG_STAT_TSD_FAST:
|
|
case CHG_STAT_TSD_TOPOFF:
|
|
case CHG_STAT_BAT_ERR:
|
|
*val = POWER_SUPPLY_CHARGE_TYPE_NONE;
|
|
break;
|
|
default:
|
|
*val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd70528_get_battery_health(struct bd70528_psy *bdpsy, int *val)
|
|
{
|
|
int ret;
|
|
unsigned int v;
|
|
|
|
ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_BAT_STAT, &v);
|
|
if (ret) {
|
|
dev_err(bdpsy->dev, "Battery state read failure %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
/* No battery? */
|
|
if (!(v & BD70528_MASK_CHG_BAT_DETECT))
|
|
*val = POWER_SUPPLY_HEALTH_DEAD;
|
|
else if (v & BD70528_MASK_CHG_BAT_OVERVOLT)
|
|
*val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
|
|
else if (v & BD70528_MASK_CHG_BAT_TIMER)
|
|
*val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
|
|
else
|
|
*val = POWER_SUPPLY_HEALTH_GOOD;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd70528_get_online(struct bd70528_psy *bdpsy, int *val)
|
|
{
|
|
int ret;
|
|
unsigned int v;
|
|
|
|
ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_IN_STAT, &v);
|
|
if (ret) {
|
|
dev_err(bdpsy->dev, "DC1 IN state read failure %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
*val = (v & BD70528_MASK_CHG_DCIN1_UVLO) ? 1 : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val)
|
|
{
|
|
int ret;
|
|
unsigned int v;
|
|
|
|
ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_BAT_STAT, &v);
|
|
if (ret) {
|
|
dev_err(bdpsy->dev, "Battery state read failure %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
*val = (v & BD70528_MASK_CHG_BAT_DETECT) ? 1 : 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct linear_range current_limit_ranges[] = {
|
|
{
|
|
.min = 5,
|
|
.step = 1,
|
|
.min_sel = 0,
|
|
.max_sel = 0x22,
|
|
},
|
|
{
|
|
.min = 40,
|
|
.step = 5,
|
|
.min_sel = 0x23,
|
|
.max_sel = 0x26,
|
|
},
|
|
{
|
|
.min = 60,
|
|
.step = 20,
|
|
.min_sel = 0x27,
|
|
.max_sel = 0x2d,
|
|
},
|
|
{
|
|
.min = 200,
|
|
.step = 50,
|
|
.min_sel = 0x2e,
|
|
.max_sel = 0x34,
|
|
},
|
|
{
|
|
.min = 500,
|
|
.step = 0,
|
|
.min_sel = 0x35,
|
|
.max_sel = 0x3f,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* BD70528 would support setting and getting own charge current/
|
|
* voltage for low temperatures. The driver currently only reads
|
|
* the charge current at room temperature. We do set both though.
|
|
*/
|
|
static const struct linear_range warm_charge_curr[] = {
|
|
{
|
|
.min = 10,
|
|
.step = 10,
|
|
.min_sel = 0,
|
|
.max_sel = 0x12,
|
|
},
|
|
{
|
|
.min = 200,
|
|
.step = 25,
|
|
.min_sel = 0x13,
|
|
.max_sel = 0x1f,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Cold charge current selectors are identical to warm charge current
|
|
* selectors. The difference is that only smaller currents are available
|
|
* at cold charge range.
|
|
*/
|
|
#define MAX_COLD_CHG_CURR_SEL 0x15
|
|
#define MAX_WARM_CHG_CURR_SEL 0x1f
|
|
#define MIN_CHG_CURR_SEL 0x0
|
|
|
|
static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
|
|
{
|
|
unsigned int sel;
|
|
int ret;
|
|
|
|
ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CHG_CURR_WARM,
|
|
&sel);
|
|
if (ret) {
|
|
dev_err(bdpsy->dev,
|
|
"Charge current reading failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
sel &= BD70528_MASK_CHG_CHG_CURR;
|
|
|
|
ret = linear_range_get_value_array(&warm_charge_curr[0],
|
|
ARRAY_SIZE(warm_charge_curr),
|
|
sel, ma);
|
|
if (ret) {
|
|
dev_err(bdpsy->dev,
|
|
"Unknown charge current value 0x%x\n",
|
|
sel);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int get_current_limit(struct bd70528_psy *bdpsy, int *ma)
|
|
{
|
|
unsigned int sel;
|
|
int ret;
|
|
|
|
ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_DCIN_ILIM,
|
|
&sel);
|
|
|
|
if (ret) {
|
|
dev_err(bdpsy->dev,
|
|
"Input current limit reading failed (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
sel &= BD70528_MASK_CHG_DCIN_ILIM;
|
|
|
|
ret = linear_range_get_value_array(¤t_limit_ranges[0],
|
|
ARRAY_SIZE(current_limit_ranges),
|
|
sel, ma);
|
|
if (ret) {
|
|
/* Unspecified values mean 500 mA */
|
|
*ma = 500;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static enum power_supply_property bd70528_charger_props[] = {
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_CHARGE_TYPE,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
|
|
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
|
|
POWER_SUPPLY_PROP_MODEL_NAME,
|
|
POWER_SUPPLY_PROP_MANUFACTURER,
|
|
};
|
|
|
|
static int bd70528_charger_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
|
|
int ret = 0;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
return bd70528_get_charger_status(bdpsy, &val->intval);
|
|
case POWER_SUPPLY_PROP_CHARGE_TYPE:
|
|
return bd70528_get_charge_type(bdpsy, &val->intval);
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
return bd70528_get_battery_health(bdpsy, &val->intval);
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
return bd70528_get_present(bdpsy, &val->intval);
|
|
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
|
|
ret = get_current_limit(bdpsy, &val->intval);
|
|
val->intval *= 1000;
|
|
return ret;
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
ret = get_charge_current(bdpsy, &val->intval);
|
|
val->intval *= 1000;
|
|
return ret;
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
return bd70528_get_online(bdpsy, &val->intval);
|
|
case POWER_SUPPLY_PROP_MODEL_NAME:
|
|
val->strval = bd70528_charger_model;
|
|
return 0;
|
|
case POWER_SUPPLY_PROP_MANUFACTURER:
|
|
val->strval = bd70528_charger_manufacturer;
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int bd70528_prop_is_writable(struct power_supply *psy,
|
|
enum power_supply_property psp)
|
|
{
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
return 1;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int set_charge_current(struct bd70528_psy *bdpsy, int ma)
|
|
{
|
|
unsigned int reg;
|
|
int ret = 0, tmpret;
|
|
bool found;
|
|
|
|
if (ma > 500) {
|
|
dev_warn(bdpsy->dev,
|
|
"Requested charge current %u exceed maximum (500mA)\n",
|
|
ma);
|
|
reg = MAX_WARM_CHG_CURR_SEL;
|
|
goto set;
|
|
}
|
|
if (ma < 10) {
|
|
dev_err(bdpsy->dev,
|
|
"Requested charge current %u smaller than min (10mA)\n",
|
|
ma);
|
|
reg = MIN_CHG_CURR_SEL;
|
|
ret = -EINVAL;
|
|
goto set;
|
|
}
|
|
|
|
/*
|
|
* For BD70528 voltage/current limits we happily accept any value which
|
|
* belongs the range. We could check if value matching the selector is
|
|
* desired by computing the range min + (sel - sel_low) * range step - but
|
|
* I guess it is enough if we use voltage/current which is closest (below)
|
|
* the requested?
|
|
*/
|
|
|
|
ret = linear_range_get_selector_low_array(warm_charge_curr,
|
|
ARRAY_SIZE(warm_charge_curr),
|
|
ma, ®, &found);
|
|
if (ret) {
|
|
dev_err(bdpsy->dev,
|
|
"Unsupported charge current %u mA\n", ma);
|
|
reg = MIN_CHG_CURR_SEL;
|
|
goto set;
|
|
}
|
|
if (!found) {
|
|
/*
|
|
* There was a gap in supported values and we hit it.
|
|
* Yet a smaller value was found so we use it.
|
|
*/
|
|
dev_warn(bdpsy->dev,
|
|
"Unsupported charge current %u mA\n", ma);
|
|
}
|
|
set:
|
|
|
|
tmpret = regmap_update_bits(bdpsy->regmap,
|
|
BD70528_REG_CHG_CHG_CURR_WARM,
|
|
BD70528_MASK_CHG_CHG_CURR, reg);
|
|
if (tmpret)
|
|
dev_err(bdpsy->dev,
|
|
"Charge current write failure (%d)\n", tmpret);
|
|
|
|
if (reg > MAX_COLD_CHG_CURR_SEL)
|
|
reg = MAX_COLD_CHG_CURR_SEL;
|
|
|
|
if (!tmpret)
|
|
tmpret = regmap_update_bits(bdpsy->regmap,
|
|
BD70528_REG_CHG_CHG_CURR_COLD,
|
|
BD70528_MASK_CHG_CHG_CURR, reg);
|
|
|
|
if (!ret)
|
|
ret = tmpret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
#define MAX_CURR_LIMIT_SEL 0x34
|
|
#define MIN_CURR_LIMIT_SEL 0x0
|
|
|
|
static int set_current_limit(struct bd70528_psy *bdpsy, int ma)
|
|
{
|
|
unsigned int reg;
|
|
int ret = 0, tmpret;
|
|
bool found;
|
|
|
|
if (ma > 500) {
|
|
dev_warn(bdpsy->dev,
|
|
"Requested current limit %u exceed maximum (500mA)\n",
|
|
ma);
|
|
reg = MAX_CURR_LIMIT_SEL;
|
|
goto set;
|
|
}
|
|
if (ma < 5) {
|
|
dev_err(bdpsy->dev,
|
|
"Requested current limit %u smaller than min (5mA)\n",
|
|
ma);
|
|
reg = MIN_CURR_LIMIT_SEL;
|
|
ret = -EINVAL;
|
|
goto set;
|
|
}
|
|
|
|
ret = linear_range_get_selector_low_array(current_limit_ranges,
|
|
ARRAY_SIZE(current_limit_ranges),
|
|
ma, ®, &found);
|
|
if (ret) {
|
|
dev_err(bdpsy->dev, "Unsupported current limit %umA\n", ma);
|
|
reg = MIN_CURR_LIMIT_SEL;
|
|
goto set;
|
|
}
|
|
if (!found) {
|
|
/*
|
|
* There was a gap in supported values and we hit it.
|
|
* We found a smaller value from ranges and use it.
|
|
* Warn user though.
|
|
*/
|
|
dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", ma);
|
|
}
|
|
|
|
set:
|
|
tmpret = regmap_update_bits(bdpsy->regmap,
|
|
BD70528_REG_CHG_DCIN_ILIM,
|
|
BD70528_MASK_CHG_DCIN_ILIM, reg);
|
|
|
|
if (!ret)
|
|
ret = tmpret;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bd70528_charger_set_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
const union power_supply_propval *val)
|
|
{
|
|
struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
|
|
return set_current_limit(bdpsy, val->intval / 1000);
|
|
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
|
|
return set_charge_current(bdpsy, val->intval / 1000);
|
|
default:
|
|
break;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct power_supply_desc bd70528_charger_desc = {
|
|
.name = "bd70528-charger",
|
|
.type = POWER_SUPPLY_TYPE_MAINS,
|
|
.properties = bd70528_charger_props,
|
|
.num_properties = ARRAY_SIZE(bd70528_charger_props),
|
|
.get_property = bd70528_charger_get_property,
|
|
.set_property = bd70528_charger_set_property,
|
|
.property_is_writeable = bd70528_prop_is_writable,
|
|
};
|
|
|
|
static int bd70528_power_probe(struct platform_device *pdev)
|
|
{
|
|
struct bd70528_psy *bdpsy;
|
|
struct power_supply_config cfg = {};
|
|
|
|
bdpsy = devm_kzalloc(&pdev->dev, sizeof(*bdpsy), GFP_KERNEL);
|
|
if (!bdpsy)
|
|
return -ENOMEM;
|
|
|
|
bdpsy->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!bdpsy->regmap) {
|
|
dev_err(&pdev->dev, "No regmap found for chip\n");
|
|
return -EINVAL;
|
|
}
|
|
bdpsy->dev = &pdev->dev;
|
|
|
|
platform_set_drvdata(pdev, bdpsy);
|
|
cfg.drv_data = bdpsy;
|
|
cfg.of_node = pdev->dev.parent->of_node;
|
|
|
|
bdpsy->psy = devm_power_supply_register(&pdev->dev,
|
|
&bd70528_charger_desc, &cfg);
|
|
if (IS_ERR(bdpsy->psy)) {
|
|
dev_err(&pdev->dev, "failed: power supply register\n");
|
|
return PTR_ERR(bdpsy->psy);
|
|
}
|
|
|
|
return bd70528_get_irqs(pdev, bdpsy);
|
|
}
|
|
|
|
static struct platform_driver bd70528_power = {
|
|
.driver = {
|
|
.name = "bd70528-power"
|
|
},
|
|
.probe = bd70528_power_probe,
|
|
};
|
|
|
|
module_platform_driver(bd70528_power);
|
|
|
|
MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
|
|
MODULE_DESCRIPTION("BD70528 power-supply driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:bd70528-power");
|