427 строки
13 KiB
C
427 строки
13 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2012 by Alan Stern
|
|
*/
|
|
|
|
/* This file is part of ehci-hcd.c */
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Set a bit in the USBCMD register */
|
|
static void ehci_set_command_bit(struct ehci_hcd *ehci, u32 bit)
|
|
{
|
|
ehci->command |= bit;
|
|
ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
|
|
|
/* unblock posted write */
|
|
ehci_readl(ehci, &ehci->regs->command);
|
|
}
|
|
|
|
/* Clear a bit in the USBCMD register */
|
|
static void ehci_clear_command_bit(struct ehci_hcd *ehci, u32 bit)
|
|
{
|
|
ehci->command &= ~bit;
|
|
ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
|
|
|
/* unblock posted write */
|
|
ehci_readl(ehci, &ehci->regs->command);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* EHCI timer support... Now using hrtimers.
|
|
*
|
|
* Lots of different events are triggered from ehci->hrtimer. Whenever
|
|
* the timer routine runs, it checks each possible event; events that are
|
|
* currently enabled and whose expiration time has passed get handled.
|
|
* The set of enabled events is stored as a collection of bitflags in
|
|
* ehci->enabled_hrtimer_events, and they are numbered in order of
|
|
* increasing delay values (ranging between 1 ms and 100 ms).
|
|
*
|
|
* Rather than implementing a sorted list or tree of all pending events,
|
|
* we keep track only of the lowest-numbered pending event, in
|
|
* ehci->next_hrtimer_event. Whenever ehci->hrtimer gets restarted, its
|
|
* expiration time is set to the timeout value for this event.
|
|
*
|
|
* As a result, events might not get handled right away; the actual delay
|
|
* could be anywhere up to twice the requested delay. This doesn't
|
|
* matter, because none of the events are especially time-critical. The
|
|
* ones that matter most all have a delay of 1 ms, so they will be
|
|
* handled after 2 ms at most, which is okay. In addition to this, we
|
|
* allow for an expiration range of 1 ms.
|
|
*/
|
|
|
|
/*
|
|
* Delay lengths for the hrtimer event types.
|
|
* Keep this list sorted by delay length, in the same order as
|
|
* the event types indexed by enum ehci_hrtimer_event in ehci.h.
|
|
*/
|
|
static unsigned event_delays_ns[] = {
|
|
1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_ASS */
|
|
1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_PSS */
|
|
1 * NSEC_PER_MSEC, /* EHCI_HRTIMER_POLL_DEAD */
|
|
1125 * NSEC_PER_USEC, /* EHCI_HRTIMER_UNLINK_INTR */
|
|
2 * NSEC_PER_MSEC, /* EHCI_HRTIMER_FREE_ITDS */
|
|
2 * NSEC_PER_MSEC, /* EHCI_HRTIMER_ACTIVE_UNLINK */
|
|
5 * NSEC_PER_MSEC, /* EHCI_HRTIMER_START_UNLINK_INTR */
|
|
6 * NSEC_PER_MSEC, /* EHCI_HRTIMER_ASYNC_UNLINKS */
|
|
10 * NSEC_PER_MSEC, /* EHCI_HRTIMER_IAA_WATCHDOG */
|
|
10 * NSEC_PER_MSEC, /* EHCI_HRTIMER_DISABLE_PERIODIC */
|
|
15 * NSEC_PER_MSEC, /* EHCI_HRTIMER_DISABLE_ASYNC */
|
|
100 * NSEC_PER_MSEC, /* EHCI_HRTIMER_IO_WATCHDOG */
|
|
};
|
|
|
|
/* Enable a pending hrtimer event */
|
|
static void ehci_enable_event(struct ehci_hcd *ehci, unsigned event,
|
|
bool resched)
|
|
{
|
|
ktime_t *timeout = &ehci->hr_timeouts[event];
|
|
|
|
if (resched)
|
|
*timeout = ktime_add(ktime_get(), event_delays_ns[event]);
|
|
ehci->enabled_hrtimer_events |= (1 << event);
|
|
|
|
/* Track only the lowest-numbered pending event */
|
|
if (event < ehci->next_hrtimer_event) {
|
|
ehci->next_hrtimer_event = event;
|
|
hrtimer_start_range_ns(&ehci->hrtimer, *timeout,
|
|
NSEC_PER_MSEC, HRTIMER_MODE_ABS);
|
|
}
|
|
}
|
|
|
|
|
|
/* Poll the STS_ASS status bit; see when it agrees with CMD_ASE */
|
|
static void ehci_poll_ASS(struct ehci_hcd *ehci)
|
|
{
|
|
unsigned actual, want;
|
|
|
|
/* Don't enable anything if the controller isn't running (e.g., died) */
|
|
if (ehci->rh_state != EHCI_RH_RUNNING)
|
|
return;
|
|
|
|
want = (ehci->command & CMD_ASE) ? STS_ASS : 0;
|
|
actual = ehci_readl(ehci, &ehci->regs->status) & STS_ASS;
|
|
|
|
if (want != actual) {
|
|
|
|
/* Poll again later, but give up after about 2-4 ms */
|
|
if (ehci->ASS_poll_count++ < 2) {
|
|
ehci_enable_event(ehci, EHCI_HRTIMER_POLL_ASS, true);
|
|
return;
|
|
}
|
|
ehci_dbg(ehci, "Waited too long for the async schedule status (%x/%x), giving up\n",
|
|
want, actual);
|
|
}
|
|
ehci->ASS_poll_count = 0;
|
|
|
|
/* The status is up-to-date; restart or stop the schedule as needed */
|
|
if (want == 0) { /* Stopped */
|
|
if (ehci->async_count > 0)
|
|
ehci_set_command_bit(ehci, CMD_ASE);
|
|
|
|
} else { /* Running */
|
|
if (ehci->async_count == 0) {
|
|
|
|
/* Turn off the schedule after a while */
|
|
ehci_enable_event(ehci, EHCI_HRTIMER_DISABLE_ASYNC,
|
|
true);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Turn off the async schedule after a brief delay */
|
|
static void ehci_disable_ASE(struct ehci_hcd *ehci)
|
|
{
|
|
ehci_clear_command_bit(ehci, CMD_ASE);
|
|
}
|
|
|
|
|
|
/* Poll the STS_PSS status bit; see when it agrees with CMD_PSE */
|
|
static void ehci_poll_PSS(struct ehci_hcd *ehci)
|
|
{
|
|
unsigned actual, want;
|
|
|
|
/* Don't do anything if the controller isn't running (e.g., died) */
|
|
if (ehci->rh_state != EHCI_RH_RUNNING)
|
|
return;
|
|
|
|
want = (ehci->command & CMD_PSE) ? STS_PSS : 0;
|
|
actual = ehci_readl(ehci, &ehci->regs->status) & STS_PSS;
|
|
|
|
if (want != actual) {
|
|
|
|
/* Poll again later, but give up after about 2-4 ms */
|
|
if (ehci->PSS_poll_count++ < 2) {
|
|
ehci_enable_event(ehci, EHCI_HRTIMER_POLL_PSS, true);
|
|
return;
|
|
}
|
|
ehci_dbg(ehci, "Waited too long for the periodic schedule status (%x/%x), giving up\n",
|
|
want, actual);
|
|
}
|
|
ehci->PSS_poll_count = 0;
|
|
|
|
/* The status is up-to-date; restart or stop the schedule as needed */
|
|
if (want == 0) { /* Stopped */
|
|
if (ehci->periodic_count > 0)
|
|
ehci_set_command_bit(ehci, CMD_PSE);
|
|
|
|
} else { /* Running */
|
|
if (ehci->periodic_count == 0) {
|
|
|
|
/* Turn off the schedule after a while */
|
|
ehci_enable_event(ehci, EHCI_HRTIMER_DISABLE_PERIODIC,
|
|
true);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Turn off the periodic schedule after a brief delay */
|
|
static void ehci_disable_PSE(struct ehci_hcd *ehci)
|
|
{
|
|
ehci_clear_command_bit(ehci, CMD_PSE);
|
|
}
|
|
|
|
|
|
/* Poll the STS_HALT status bit; see when a dead controller stops */
|
|
static void ehci_handle_controller_death(struct ehci_hcd *ehci)
|
|
{
|
|
if (!(ehci_readl(ehci, &ehci->regs->status) & STS_HALT)) {
|
|
|
|
/* Give up after a few milliseconds */
|
|
if (ehci->died_poll_count++ < 5) {
|
|
/* Try again later */
|
|
ehci_enable_event(ehci, EHCI_HRTIMER_POLL_DEAD, true);
|
|
return;
|
|
}
|
|
ehci_warn(ehci, "Waited too long for the controller to stop, giving up\n");
|
|
}
|
|
|
|
/* Clean up the mess */
|
|
ehci->rh_state = EHCI_RH_HALTED;
|
|
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
|
|
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
|
|
ehci_work(ehci);
|
|
end_unlink_async(ehci);
|
|
|
|
/* Not in process context, so don't try to reset the controller */
|
|
}
|
|
|
|
/* start to unlink interrupt QHs */
|
|
static void ehci_handle_start_intr_unlinks(struct ehci_hcd *ehci)
|
|
{
|
|
bool stopped = (ehci->rh_state < EHCI_RH_RUNNING);
|
|
|
|
/*
|
|
* Process all the QHs on the intr_unlink list that were added
|
|
* before the current unlink cycle began. The list is in
|
|
* temporal order, so stop when we reach the first entry in the
|
|
* current cycle. But if the root hub isn't running then
|
|
* process all the QHs on the list.
|
|
*/
|
|
while (!list_empty(&ehci->intr_unlink_wait)) {
|
|
struct ehci_qh *qh;
|
|
|
|
qh = list_first_entry(&ehci->intr_unlink_wait,
|
|
struct ehci_qh, unlink_node);
|
|
if (!stopped && (qh->unlink_cycle ==
|
|
ehci->intr_unlink_wait_cycle))
|
|
break;
|
|
list_del_init(&qh->unlink_node);
|
|
qh->unlink_reason |= QH_UNLINK_QUEUE_EMPTY;
|
|
start_unlink_intr(ehci, qh);
|
|
}
|
|
|
|
/* Handle remaining entries later */
|
|
if (!list_empty(&ehci->intr_unlink_wait)) {
|
|
ehci_enable_event(ehci, EHCI_HRTIMER_START_UNLINK_INTR, true);
|
|
++ehci->intr_unlink_wait_cycle;
|
|
}
|
|
}
|
|
|
|
/* Handle unlinked interrupt QHs once they are gone from the hardware */
|
|
static void ehci_handle_intr_unlinks(struct ehci_hcd *ehci)
|
|
{
|
|
bool stopped = (ehci->rh_state < EHCI_RH_RUNNING);
|
|
|
|
/*
|
|
* Process all the QHs on the intr_unlink list that were added
|
|
* before the current unlink cycle began. The list is in
|
|
* temporal order, so stop when we reach the first entry in the
|
|
* current cycle. But if the root hub isn't running then
|
|
* process all the QHs on the list.
|
|
*/
|
|
ehci->intr_unlinking = true;
|
|
while (!list_empty(&ehci->intr_unlink)) {
|
|
struct ehci_qh *qh;
|
|
|
|
qh = list_first_entry(&ehci->intr_unlink, struct ehci_qh,
|
|
unlink_node);
|
|
if (!stopped && qh->unlink_cycle == ehci->intr_unlink_cycle)
|
|
break;
|
|
list_del_init(&qh->unlink_node);
|
|
end_unlink_intr(ehci, qh);
|
|
}
|
|
|
|
/* Handle remaining entries later */
|
|
if (!list_empty(&ehci->intr_unlink)) {
|
|
ehci_enable_event(ehci, EHCI_HRTIMER_UNLINK_INTR, true);
|
|
++ehci->intr_unlink_cycle;
|
|
}
|
|
ehci->intr_unlinking = false;
|
|
}
|
|
|
|
|
|
/* Start another free-iTDs/siTDs cycle */
|
|
static void start_free_itds(struct ehci_hcd *ehci)
|
|
{
|
|
if (!(ehci->enabled_hrtimer_events & BIT(EHCI_HRTIMER_FREE_ITDS))) {
|
|
ehci->last_itd_to_free = list_entry(
|
|
ehci->cached_itd_list.prev,
|
|
struct ehci_itd, itd_list);
|
|
ehci->last_sitd_to_free = list_entry(
|
|
ehci->cached_sitd_list.prev,
|
|
struct ehci_sitd, sitd_list);
|
|
ehci_enable_event(ehci, EHCI_HRTIMER_FREE_ITDS, true);
|
|
}
|
|
}
|
|
|
|
/* Wait for controller to stop using old iTDs and siTDs */
|
|
static void end_free_itds(struct ehci_hcd *ehci)
|
|
{
|
|
struct ehci_itd *itd, *n;
|
|
struct ehci_sitd *sitd, *sn;
|
|
|
|
if (ehci->rh_state < EHCI_RH_RUNNING) {
|
|
ehci->last_itd_to_free = NULL;
|
|
ehci->last_sitd_to_free = NULL;
|
|
}
|
|
|
|
list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) {
|
|
list_del(&itd->itd_list);
|
|
dma_pool_free(ehci->itd_pool, itd, itd->itd_dma);
|
|
if (itd == ehci->last_itd_to_free)
|
|
break;
|
|
}
|
|
list_for_each_entry_safe(sitd, sn, &ehci->cached_sitd_list, sitd_list) {
|
|
list_del(&sitd->sitd_list);
|
|
dma_pool_free(ehci->sitd_pool, sitd, sitd->sitd_dma);
|
|
if (sitd == ehci->last_sitd_to_free)
|
|
break;
|
|
}
|
|
|
|
if (!list_empty(&ehci->cached_itd_list) ||
|
|
!list_empty(&ehci->cached_sitd_list))
|
|
start_free_itds(ehci);
|
|
}
|
|
|
|
|
|
/* Handle lost (or very late) IAA interrupts */
|
|
static void ehci_iaa_watchdog(struct ehci_hcd *ehci)
|
|
{
|
|
u32 cmd, status;
|
|
|
|
/*
|
|
* Lost IAA irqs wedge things badly; seen first with a vt8235.
|
|
* So we need this watchdog, but must protect it against both
|
|
* (a) SMP races against real IAA firing and retriggering, and
|
|
* (b) clean HC shutdown, when IAA watchdog was pending.
|
|
*/
|
|
if (!ehci->iaa_in_progress || ehci->rh_state != EHCI_RH_RUNNING)
|
|
return;
|
|
|
|
/* If we get here, IAA is *REALLY* late. It's barely
|
|
* conceivable that the system is so busy that CMD_IAAD
|
|
* is still legitimately set, so let's be sure it's
|
|
* clear before we read STS_IAA. (The HC should clear
|
|
* CMD_IAAD when it sets STS_IAA.)
|
|
*/
|
|
cmd = ehci_readl(ehci, &ehci->regs->command);
|
|
|
|
/*
|
|
* If IAA is set here it either legitimately triggered
|
|
* after the watchdog timer expired (_way_ late, so we'll
|
|
* still count it as lost) ... or a silicon erratum:
|
|
* - VIA seems to set IAA without triggering the IRQ;
|
|
* - IAAD potentially cleared without setting IAA.
|
|
*/
|
|
status = ehci_readl(ehci, &ehci->regs->status);
|
|
if ((status & STS_IAA) || !(cmd & CMD_IAAD)) {
|
|
INCR(ehci->stats.lost_iaa);
|
|
ehci_writel(ehci, STS_IAA, &ehci->regs->status);
|
|
}
|
|
|
|
ehci_dbg(ehci, "IAA watchdog: status %x cmd %x\n", status, cmd);
|
|
end_iaa_cycle(ehci);
|
|
}
|
|
|
|
|
|
/* Enable the I/O watchdog, if appropriate */
|
|
static void turn_on_io_watchdog(struct ehci_hcd *ehci)
|
|
{
|
|
/* Not needed if the controller isn't running or it's already enabled */
|
|
if (ehci->rh_state != EHCI_RH_RUNNING ||
|
|
(ehci->enabled_hrtimer_events &
|
|
BIT(EHCI_HRTIMER_IO_WATCHDOG)))
|
|
return;
|
|
|
|
/*
|
|
* Isochronous transfers always need the watchdog.
|
|
* For other sorts we use it only if the flag is set.
|
|
*/
|
|
if (ehci->isoc_count > 0 || (ehci->need_io_watchdog &&
|
|
ehci->async_count + ehci->intr_count > 0))
|
|
ehci_enable_event(ehci, EHCI_HRTIMER_IO_WATCHDOG, true);
|
|
}
|
|
|
|
|
|
/*
|
|
* Handler functions for the hrtimer event types.
|
|
* Keep this array in the same order as the event types indexed by
|
|
* enum ehci_hrtimer_event in ehci.h.
|
|
*/
|
|
static void (*event_handlers[])(struct ehci_hcd *) = {
|
|
ehci_poll_ASS, /* EHCI_HRTIMER_POLL_ASS */
|
|
ehci_poll_PSS, /* EHCI_HRTIMER_POLL_PSS */
|
|
ehci_handle_controller_death, /* EHCI_HRTIMER_POLL_DEAD */
|
|
ehci_handle_intr_unlinks, /* EHCI_HRTIMER_UNLINK_INTR */
|
|
end_free_itds, /* EHCI_HRTIMER_FREE_ITDS */
|
|
end_unlink_async, /* EHCI_HRTIMER_ACTIVE_UNLINK */
|
|
ehci_handle_start_intr_unlinks, /* EHCI_HRTIMER_START_UNLINK_INTR */
|
|
unlink_empty_async, /* EHCI_HRTIMER_ASYNC_UNLINKS */
|
|
ehci_iaa_watchdog, /* EHCI_HRTIMER_IAA_WATCHDOG */
|
|
ehci_disable_PSE, /* EHCI_HRTIMER_DISABLE_PERIODIC */
|
|
ehci_disable_ASE, /* EHCI_HRTIMER_DISABLE_ASYNC */
|
|
ehci_work, /* EHCI_HRTIMER_IO_WATCHDOG */
|
|
};
|
|
|
|
static enum hrtimer_restart ehci_hrtimer_func(struct hrtimer *t)
|
|
{
|
|
struct ehci_hcd *ehci = container_of(t, struct ehci_hcd, hrtimer);
|
|
ktime_t now;
|
|
unsigned long events;
|
|
unsigned long flags;
|
|
unsigned e;
|
|
|
|
spin_lock_irqsave(&ehci->lock, flags);
|
|
|
|
events = ehci->enabled_hrtimer_events;
|
|
ehci->enabled_hrtimer_events = 0;
|
|
ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
|
|
|
|
/*
|
|
* Check each pending event. If its time has expired, handle
|
|
* the event; otherwise re-enable it.
|
|
*/
|
|
now = ktime_get();
|
|
for_each_set_bit(e, &events, EHCI_HRTIMER_NUM_EVENTS) {
|
|
if (ktime_compare(now, ehci->hr_timeouts[e]) >= 0)
|
|
event_handlers[e](ehci);
|
|
else
|
|
ehci_enable_event(ehci, e, false);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&ehci->lock, flags);
|
|
return HRTIMER_NORESTART;
|
|
}
|