327 строки
9.6 KiB
C
327 строки
9.6 KiB
C
/*
|
|
* linux/drivers/video/kyro/STG4000InitDevice.c
|
|
*
|
|
* Copyright (C) 2000 Imagination Technologies Ltd
|
|
* Copyright (C) 2002 STMicroelectronics
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
|
|
#include "STG4000Reg.h"
|
|
#include "STG4000Interface.h"
|
|
|
|
/* SDRAM fixed settings */
|
|
#define SDRAM_CFG_0 0x49A1
|
|
#define SDRAM_CFG_1 0xA732
|
|
#define SDRAM_CFG_2 0x31
|
|
#define SDRAM_ARB_CFG 0xA0
|
|
#define SDRAM_REFRESH 0x20
|
|
|
|
/* Reset values */
|
|
#define PMX2_SOFTRESET_DAC_RST 0x0001
|
|
#define PMX2_SOFTRESET_C1_RST 0x0004
|
|
#define PMX2_SOFTRESET_C2_RST 0x0008
|
|
#define PMX2_SOFTRESET_3D_RST 0x0010
|
|
#define PMX2_SOFTRESET_VIDIN_RST 0x0020
|
|
#define PMX2_SOFTRESET_TLB_RST 0x0040
|
|
#define PMX2_SOFTRESET_SD_RST 0x0080
|
|
#define PMX2_SOFTRESET_VGA_RST 0x0100
|
|
#define PMX2_SOFTRESET_ROM_RST 0x0200 /* reserved bit, do not reset */
|
|
#define PMX2_SOFTRESET_TA_RST 0x0400
|
|
#define PMX2_SOFTRESET_REG_RST 0x4000
|
|
#define PMX2_SOFTRESET_ALL 0x7fff
|
|
|
|
/* Core clock freq */
|
|
#define CORE_PLL_FREQ 1000000
|
|
|
|
/* Reference Clock freq */
|
|
#define REF_FREQ 14318
|
|
|
|
/* PCI Registers */
|
|
static u16 CorePllControl = 0x70;
|
|
|
|
#define PCI_CONFIG_SUBSYS_ID 0x2e
|
|
|
|
/* Misc */
|
|
#define CORE_PLL_MODE_REG_0_7 3
|
|
#define CORE_PLL_MODE_REG_8_15 2
|
|
#define CORE_PLL_MODE_CONFIG_REG 1
|
|
#define DAC_PLL_CONFIG_REG 0
|
|
|
|
#define STG_MAX_VCO 500000
|
|
#define STG_MIN_VCO 100000
|
|
|
|
/* PLL Clock */
|
|
#define STG4K3_PLL_SCALER 8 /* scale numbers by 2^8 for fixed point calc */
|
|
#define STG4K3_PLL_MIN_R 2 /* Minimum multiplier */
|
|
#define STG4K3_PLL_MAX_R 33 /* Max */
|
|
#define STG4K3_PLL_MIN_F 2 /* Minimum divisor */
|
|
#define STG4K3_PLL_MAX_F 513 /* Max */
|
|
#define STG4K3_PLL_MIN_OD 0 /* Min output divider (shift) */
|
|
#define STG4K3_PLL_MAX_OD 2 /* Max */
|
|
#define STG4K3_PLL_MIN_VCO_SC (100000000 >> STG4K3_PLL_SCALER) /* Min VCO rate */
|
|
#define STG4K3_PLL_MAX_VCO_SC (500000000 >> STG4K3_PLL_SCALER) /* Max VCO rate */
|
|
#define STG4K3_PLL_MINR_VCO_SC (100000000 >> STG4K3_PLL_SCALER) /* Min VCO rate (restricted) */
|
|
#define STG4K3_PLL_MAXR_VCO_SC (500000000 >> STG4K3_PLL_SCALER) /* Max VCO rate (restricted) */
|
|
#define STG4K3_PLL_MINR_VCO 100000000 /* Min VCO rate (restricted) */
|
|
#define STG4K3_PLL_MAX_VCO 500000000 /* Max VCO rate */
|
|
#define STG4K3_PLL_MAXR_VCO 500000000 /* Max VCO rate (restricted) */
|
|
|
|
#define OS_DELAY(X) \
|
|
{ \
|
|
volatile u32 i,count=0; \
|
|
for(i=0;i<X;i++) count++; \
|
|
}
|
|
|
|
static u32 InitSDRAMRegisters(volatile STG4000REG __iomem *pSTGReg,
|
|
u32 dwSubSysID, u32 dwRevID)
|
|
{
|
|
u32 adwSDRAMArgCfg0[] = { 0xa0, 0x80, 0xa0, 0xa0, 0xa0 };
|
|
u32 adwSDRAMCfg1[] = { 0x8732, 0x8732, 0xa732, 0xa732, 0x8732 };
|
|
u32 adwSDRAMCfg2[] = { 0x87d2, 0x87d2, 0xa7d2, 0x87d2, 0xa7d2 };
|
|
u32 adwSDRAMRsh[] = { 36, 39, 40 };
|
|
u32 adwChipSpeed[] = { 110, 120, 125 };
|
|
u32 dwMemTypeIdx;
|
|
u32 dwChipSpeedIdx;
|
|
|
|
/* Get memory tpye and chip speed indexs from the SubSysDevID */
|
|
dwMemTypeIdx = (dwSubSysID & 0x70) >> 4;
|
|
dwChipSpeedIdx = (dwSubSysID & 0x180) >> 7;
|
|
|
|
if (dwMemTypeIdx > 4 || dwChipSpeedIdx > 2)
|
|
return 0;
|
|
|
|
/* Program SD-RAM interface */
|
|
STG_WRITE_REG(SDRAMArbiterConf, adwSDRAMArgCfg0[dwMemTypeIdx]);
|
|
if (dwRevID < 5) {
|
|
STG_WRITE_REG(SDRAMConf0, 0x49A1);
|
|
STG_WRITE_REG(SDRAMConf1, adwSDRAMCfg1[dwMemTypeIdx]);
|
|
} else {
|
|
STG_WRITE_REG(SDRAMConf0, 0x4DF1);
|
|
STG_WRITE_REG(SDRAMConf1, adwSDRAMCfg2[dwMemTypeIdx]);
|
|
}
|
|
|
|
STG_WRITE_REG(SDRAMConf2, 0x31);
|
|
STG_WRITE_REG(SDRAMRefresh, adwSDRAMRsh[dwChipSpeedIdx]);
|
|
|
|
return adwChipSpeed[dwChipSpeedIdx] * 10000;
|
|
}
|
|
|
|
u32 ProgramClock(u32 refClock,
|
|
u32 coreClock,
|
|
u32 * FOut, u32 * ROut, u32 * POut)
|
|
{
|
|
u32 R = 0, F = 0, OD = 0, ODIndex = 0;
|
|
u32 ulBestR = 0, ulBestF = 0, ulBestOD = 0;
|
|
u32 ulBestVCO = 0, ulBestClk = 0, ulBestScore = 0;
|
|
u32 ulScore, ulPhaseScore, ulVcoScore;
|
|
u32 ulTmp = 0, ulVCO;
|
|
u32 ulScaleClockReq, ulMinClock, ulMaxClock;
|
|
u32 ODValues[] = { 1, 2, 0 };
|
|
|
|
/* Translate clock in Hz */
|
|
coreClock *= 100; /* in Hz */
|
|
refClock *= 1000; /* in Hz */
|
|
|
|
/* Work out acceptable clock
|
|
* The method calculates ~ +- 0.4% (1/256)
|
|
*/
|
|
ulMinClock = coreClock - (coreClock >> 8);
|
|
ulMaxClock = coreClock + (coreClock >> 8);
|
|
|
|
/* Scale clock required for use in calculations */
|
|
ulScaleClockReq = coreClock >> STG4K3_PLL_SCALER;
|
|
|
|
/* Iterate through post divider values */
|
|
for (ODIndex = 0; ODIndex < 3; ODIndex++) {
|
|
OD = ODValues[ODIndex];
|
|
R = STG4K3_PLL_MIN_R;
|
|
|
|
/* loop for pre-divider from min to max */
|
|
while (R <= STG4K3_PLL_MAX_R) {
|
|
/* estimate required feedback multiplier */
|
|
ulTmp = R * (ulScaleClockReq << OD);
|
|
|
|
/* F = ClkRequired * R * (2^OD) / Fref */
|
|
F = (u32)(ulTmp / (refClock >> STG4K3_PLL_SCALER));
|
|
|
|
/* compensate for accuracy */
|
|
if (F > STG4K3_PLL_MIN_F)
|
|
F--;
|
|
|
|
|
|
/*
|
|
* We should be close to our target frequency (if it's
|
|
* achievable with current OD & R) let's iterate
|
|
* through F for best fit
|
|
*/
|
|
while ((F >= STG4K3_PLL_MIN_F) &&
|
|
(F <= STG4K3_PLL_MAX_F)) {
|
|
/* Calc VCO at full accuracy */
|
|
ulVCO = refClock / R;
|
|
ulVCO = F * ulVCO;
|
|
|
|
/*
|
|
* Check it's within restricted VCO range
|
|
* unless of course the desired frequency is
|
|
* above the restricted range, then test
|
|
* against VCO limit
|
|
*/
|
|
if ((ulVCO >= STG4K3_PLL_MINR_VCO) &&
|
|
((ulVCO <= STG4K3_PLL_MAXR_VCO) ||
|
|
((coreClock > STG4K3_PLL_MAXR_VCO)
|
|
&& (ulVCO <= STG4K3_PLL_MAX_VCO)))) {
|
|
ulTmp = (ulVCO >> OD); /* Clock = VCO / (2^OD) */
|
|
|
|
/* Is this clock good enough? */
|
|
if ((ulTmp >= ulMinClock)
|
|
&& (ulTmp <= ulMaxClock)) {
|
|
ulPhaseScore = (((refClock / R) - (refClock / STG4K3_PLL_MAX_R))) / ((refClock - (refClock / STG4K3_PLL_MAX_R)) >> 10);
|
|
|
|
ulVcoScore = ((ulVCO - STG4K3_PLL_MINR_VCO)) / ((STG4K3_PLL_MAXR_VCO - STG4K3_PLL_MINR_VCO) >> 10);
|
|
ulScore = ulPhaseScore + ulVcoScore;
|
|
|
|
if (!ulBestScore) {
|
|
ulBestVCO = ulVCO;
|
|
ulBestOD = OD;
|
|
ulBestF = F;
|
|
ulBestR = R;
|
|
ulBestClk = ulTmp;
|
|
ulBestScore =
|
|
ulScore;
|
|
}
|
|
/* is this better, ( aim for highest Score) */
|
|
/*--------------------------------------------------------------------------
|
|
Here we want to use a scoring system which will take account of both the
|
|
value at the phase comparater and the VCO output
|
|
to do this we will use a cumulative score between the two
|
|
The way this ends up is that we choose the first value in the loop anyway
|
|
but we shall keep this code in case new restrictions come into play
|
|
--------------------------------------------------------------------------*/
|
|
if ((ulScore >= ulBestScore) && (OD > 0)) {
|
|
ulBestVCO = ulVCO;
|
|
ulBestOD = OD;
|
|
ulBestF = F;
|
|
ulBestR = R;
|
|
ulBestClk = ulTmp;
|
|
ulBestScore =
|
|
ulScore;
|
|
}
|
|
}
|
|
}
|
|
F++;
|
|
}
|
|
R++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
did we find anything?
|
|
Then return RFOD
|
|
*/
|
|
if (ulBestScore) {
|
|
*ROut = ulBestR;
|
|
*FOut = ulBestF;
|
|
|
|
if ((ulBestOD == 2) || (ulBestOD == 3)) {
|
|
*POut = 3;
|
|
} else
|
|
*POut = ulBestOD;
|
|
|
|
}
|
|
|
|
return (ulBestClk);
|
|
}
|
|
|
|
int SetCoreClockPLL(volatile STG4000REG __iomem *pSTGReg, struct pci_dev *pDev)
|
|
{
|
|
u32 F, R, P;
|
|
u16 core_pll = 0, sub;
|
|
u32 ulCoreClock;
|
|
u32 tmp;
|
|
u32 ulChipSpeed;
|
|
|
|
STG_WRITE_REG(IntMask, 0xFFFF);
|
|
|
|
/* Disable Primary Core Thread0 */
|
|
tmp = STG_READ_REG(Thread0Enable);
|
|
CLEAR_BIT(0);
|
|
STG_WRITE_REG(Thread0Enable, tmp);
|
|
|
|
/* Disable Primary Core Thread1 */
|
|
tmp = STG_READ_REG(Thread1Enable);
|
|
CLEAR_BIT(0);
|
|
STG_WRITE_REG(Thread1Enable, tmp);
|
|
|
|
STG_WRITE_REG(SoftwareReset,
|
|
PMX2_SOFTRESET_REG_RST | PMX2_SOFTRESET_ROM_RST);
|
|
STG_WRITE_REG(SoftwareReset,
|
|
PMX2_SOFTRESET_REG_RST | PMX2_SOFTRESET_TA_RST |
|
|
PMX2_SOFTRESET_ROM_RST);
|
|
|
|
/* Need to play around to reset TA */
|
|
STG_WRITE_REG(TAConfiguration, 0);
|
|
STG_WRITE_REG(SoftwareReset,
|
|
PMX2_SOFTRESET_REG_RST | PMX2_SOFTRESET_ROM_RST);
|
|
STG_WRITE_REG(SoftwareReset,
|
|
PMX2_SOFTRESET_REG_RST | PMX2_SOFTRESET_TA_RST |
|
|
PMX2_SOFTRESET_ROM_RST);
|
|
|
|
pci_read_config_word(pDev, PCI_CONFIG_SUBSYS_ID, &sub);
|
|
|
|
ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub,
|
|
(u32)pDev->revision);
|
|
|
|
if (ulChipSpeed == 0)
|
|
return -EINVAL;
|
|
|
|
ulCoreClock = ProgramClock(REF_FREQ, CORE_PLL_FREQ, &F, &R, &P);
|
|
|
|
core_pll |= ((P) | ((F - 2) << 2) | ((R - 2) << 11));
|
|
|
|
/* Set Core PLL Control to Core PLL Mode */
|
|
|
|
/* Send bits 0:7 of the Core PLL Mode register */
|
|
tmp = ((CORE_PLL_MODE_REG_0_7 << 8) | (core_pll & 0x00FF));
|
|
pci_write_config_word(pDev, CorePllControl, tmp);
|
|
/* Without some delay between the PCI config writes the clock does
|
|
not reliably set when the code is compiled -O3
|
|
*/
|
|
OS_DELAY(1000000);
|
|
|
|
tmp |= SET_BIT(14);
|
|
pci_write_config_word(pDev, CorePllControl, tmp);
|
|
OS_DELAY(1000000);
|
|
|
|
/* Send bits 8:15 of the Core PLL Mode register */
|
|
tmp =
|
|
((CORE_PLL_MODE_REG_8_15 << 8) | ((core_pll & 0xFF00) >> 8));
|
|
pci_write_config_word(pDev, CorePllControl, tmp);
|
|
OS_DELAY(1000000);
|
|
|
|
tmp |= SET_BIT(14);
|
|
pci_write_config_word(pDev, CorePllControl, tmp);
|
|
OS_DELAY(1000000);
|
|
|
|
STG_WRITE_REG(SoftwareReset, PMX2_SOFTRESET_ALL);
|
|
|
|
#if 0
|
|
/* Enable Primary Core Thread0 */
|
|
tmp = ((STG_READ_REG(Thread0Enable)) | SET_BIT(0));
|
|
STG_WRITE_REG(Thread0Enable, tmp);
|
|
|
|
/* Enable Primary Core Thread1 */
|
|
tmp = ((STG_READ_REG(Thread1Enable)) | SET_BIT(0));
|
|
STG_WRITE_REG(Thread1Enable, tmp);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|