microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/usb/serial/f81534.c

1595 строки
40 KiB
C
Исходник Ответственный История

// SPDX-License-Identifier: GPL-2.0+
/*
* F81532/F81534 USB to Serial Ports Bridge
*
* F81532 => 2 Serial Ports
* F81534 => 4 Serial Ports
*
* Copyright (C) 2016 Feature Integration Technology Inc., (Fintek)
* Copyright (C) 2016 Tom Tsai (Tom_Tsai@fintek.com.tw)
* Copyright (C) 2016 Peter Hong (Peter_Hong@fintek.com.tw)
*
* The F81532/F81534 had 1 control endpoint for setting, 1 endpoint bulk-out
* for all serial port TX and 1 endpoint bulk-in for all serial port read in
* (Read Data/MSR/LSR).
*
* Write URB is fixed with 512bytes, per serial port used 128Bytes.
* It can be described by f81534_prepare_write_buffer()
*
* Read URB is 512Bytes max, per serial port used 128Bytes.
* It can be described by f81534_process_read_urb() and maybe received with
* 128x1,2,3,4 bytes.
*
*/
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/serial_reg.h>
#include <linux/module.h>
#include <linux/uaccess.h>
/* Serial Port register Address */
#define F81534_UART_BASE_ADDRESS 0x1200
#define F81534_UART_OFFSET 0x10
#define F81534_DIVISOR_LSB_REG (0x00 + F81534_UART_BASE_ADDRESS)
#define F81534_DIVISOR_MSB_REG (0x01 + F81534_UART_BASE_ADDRESS)
#define F81534_INTERRUPT_ENABLE_REG (0x01 + F81534_UART_BASE_ADDRESS)
#define F81534_FIFO_CONTROL_REG (0x02 + F81534_UART_BASE_ADDRESS)
#define F81534_LINE_CONTROL_REG (0x03 + F81534_UART_BASE_ADDRESS)
#define F81534_MODEM_CONTROL_REG (0x04 + F81534_UART_BASE_ADDRESS)
#define F81534_LINE_STATUS_REG (0x05 + F81534_UART_BASE_ADDRESS)
#define F81534_MODEM_STATUS_REG (0x06 + F81534_UART_BASE_ADDRESS)
#define F81534_CLOCK_REG (0x08 + F81534_UART_BASE_ADDRESS)
#define F81534_CONFIG1_REG (0x09 + F81534_UART_BASE_ADDRESS)
#define F81534_DEF_CONF_ADDRESS_START 0x3000
#define F81534_DEF_CONF_SIZE 12
#define F81534_CUSTOM_ADDRESS_START 0x2f00
#define F81534_CUSTOM_DATA_SIZE 0x10
#define F81534_CUSTOM_NO_CUSTOM_DATA 0xff
#define F81534_CUSTOM_VALID_TOKEN 0xf0
#define F81534_CONF_OFFSET 1
#define F81534_CONF_INIT_GPIO_OFFSET 4
#define F81534_CONF_WORK_GPIO_OFFSET 8
#define F81534_CONF_GPIO_SHUTDOWN 7
#define F81534_CONF_GPIO_RS232 1
#define F81534_MAX_DATA_BLOCK 64
#define F81534_MAX_BUS_RETRY 20
/* Default URB timeout for USB operations */
#define F81534_USB_MAX_RETRY 10
#define F81534_USB_TIMEOUT 2000
#define F81534_SET_GET_REGISTER 0xA0
#define F81534_NUM_PORT 4
#define F81534_UNUSED_PORT 0xff
#define F81534_WRITE_BUFFER_SIZE 512
#define DRIVER_DESC "Fintek F81532/F81534"
#define FINTEK_VENDOR_ID_1 0x1934
#define FINTEK_VENDOR_ID_2 0x2C42
#define FINTEK_DEVICE_ID 0x1202
#define F81534_MAX_TX_SIZE 124
#define F81534_MAX_RX_SIZE 124
#define F81534_RECEIVE_BLOCK_SIZE 128
#define F81534_MAX_RECEIVE_BLOCK_SIZE 512
#define F81534_TOKEN_RECEIVE 0x01
#define F81534_TOKEN_WRITE 0x02
#define F81534_TOKEN_TX_EMPTY 0x03
#define F81534_TOKEN_MSR_CHANGE 0x04
/*
* We used interal SPI bus to access FLASH section. We must wait the SPI bus to
* idle if we performed any command.
*
* SPI Bus status register: F81534_BUS_REG_STATUS
* Bit 0/1 : BUSY
* Bit 2 : IDLE
*/
#define F81534_BUS_BUSY (BIT(0) | BIT(1))
#define F81534_BUS_IDLE BIT(2)
#define F81534_BUS_READ_DATA 0x1004
#define F81534_BUS_REG_STATUS 0x1003
#define F81534_BUS_REG_START 0x1002
#define F81534_BUS_REG_END 0x1001
#define F81534_CMD_READ 0x03
#define F81534_DEFAULT_BAUD_RATE 9600
#define F81534_PORT_CONF_RS232 0
#define F81534_PORT_CONF_RS485 BIT(0)
#define F81534_PORT_CONF_RS485_INVERT (BIT(0) | BIT(1))
#define F81534_PORT_CONF_MODE_MASK GENMASK(1, 0)
#define F81534_PORT_CONF_DISABLE_PORT BIT(3)
#define F81534_PORT_CONF_NOT_EXIST_PORT BIT(7)
#define F81534_PORT_UNAVAILABLE \
(F81534_PORT_CONF_DISABLE_PORT | F81534_PORT_CONF_NOT_EXIST_PORT)
#define F81534_1X_RXTRIGGER 0xc3
#define F81534_8X_RXTRIGGER 0xcf
/*
* F81532/534 Clock registers (offset +08h)
*
* Bit0: UART Enable (always on)
* Bit2-1: Clock source selector
* 00: 1.846MHz.
* 01: 18.46MHz.
* 10: 24MHz.
* 11: 14.77MHz.
* Bit4: Auto direction(RTS) control (RTS pin Low when TX)
* Bit5: Invert direction(RTS) when Bit4 enabled (RTS pin high when TX)
*/
#define F81534_UART_EN BIT(0)
#define F81534_CLK_1_846_MHZ 0
#define F81534_CLK_18_46_MHZ BIT(1)
#define F81534_CLK_24_MHZ BIT(2)
#define F81534_CLK_14_77_MHZ (BIT(1) | BIT(2))
#define F81534_CLK_MASK GENMASK(2, 1)
#define F81534_CLK_TX_DELAY_1BIT BIT(3)
#define F81534_CLK_RS485_MODE BIT(4)
#define F81534_CLK_RS485_INVERT BIT(5)
static const struct usb_device_id f81534_id_table[] = {
{ USB_DEVICE(FINTEK_VENDOR_ID_1, FINTEK_DEVICE_ID) },
{ USB_DEVICE(FINTEK_VENDOR_ID_2, FINTEK_DEVICE_ID) },
{} /* Terminating entry */
};
#define F81534_TX_EMPTY_BIT 0
struct f81534_serial_private {
u8 conf_data[F81534_DEF_CONF_SIZE];
int tty_idx[F81534_NUM_PORT];
u8 setting_idx;
int opened_port;
struct mutex urb_mutex;
};
struct f81534_port_private {
struct mutex mcr_mutex;
struct mutex lcr_mutex;
struct work_struct lsr_work;
struct usb_serial_port *port;
unsigned long tx_empty;
spinlock_t msr_lock;
u32 baud_base;
u8 shadow_mcr;
u8 shadow_lcr;
u8 shadow_msr;
u8 shadow_clk;
u8 phy_num;
};
struct f81534_pin_data {
const u16 reg_addr;
const u8 reg_mask;
};
struct f81534_port_out_pin {
struct f81534_pin_data pin[3];
};
/* Pin output value for M2/M1/M0(SD) */
static const struct f81534_port_out_pin f81534_port_out_pins[] = {
{ { { 0x2ae8, BIT(7) }, { 0x2a90, BIT(5) }, { 0x2a90, BIT(4) } } },
{ { { 0x2ae8, BIT(6) }, { 0x2ae8, BIT(0) }, { 0x2ae8, BIT(3) } } },
{ { { 0x2a90, BIT(0) }, { 0x2ae8, BIT(2) }, { 0x2a80, BIT(6) } } },
{ { { 0x2a90, BIT(3) }, { 0x2a90, BIT(2) }, { 0x2a90, BIT(1) } } },
};
static u32 const baudrate_table[] = { 115200, 921600, 1152000, 1500000 };
static u8 const clock_table[] = { F81534_CLK_1_846_MHZ, F81534_CLK_14_77_MHZ,
F81534_CLK_18_46_MHZ, F81534_CLK_24_MHZ };
static int f81534_logic_to_phy_port(struct usb_serial *serial,
struct usb_serial_port *port)
{
struct f81534_serial_private *serial_priv =
usb_get_serial_data(port->serial);
int count = 0;
int i;
for (i = 0; i < F81534_NUM_PORT; ++i) {
if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
continue;
if (port->port_number == count)
return i;
++count;
}
return -ENODEV;
}
static int f81534_set_register(struct usb_serial *serial, u16 reg, u8 data)
{
struct usb_interface *interface = serial->interface;
struct usb_device *dev = serial->dev;
size_t count = F81534_USB_MAX_RETRY;
int status;
u8 *tmp;
tmp = kmalloc(sizeof(u8), GFP_KERNEL);
if (!tmp)
return -ENOMEM;
*tmp = data;
/*
* Our device maybe not reply when heavily loading, We'll retry for
* F81534_USB_MAX_RETRY times.
*/
while (count--) {
status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
F81534_SET_GET_REGISTER,
USB_TYPE_VENDOR | USB_DIR_OUT,
reg, 0, tmp, sizeof(u8),
F81534_USB_TIMEOUT);
if (status > 0) {
status = 0;
break;
} else if (status == 0) {
status = -EIO;
}
}
if (status < 0) {
dev_err(&interface->dev, "%s: reg: %x data: %x failed: %d\n",
__func__, reg, data, status);
}
kfree(tmp);
return status;
}
static int f81534_get_register(struct usb_serial *serial, u16 reg, u8 *data)
{
struct usb_interface *interface = serial->interface;
struct usb_device *dev = serial->dev;
size_t count = F81534_USB_MAX_RETRY;
int status;
u8 *tmp;
tmp = kmalloc(sizeof(u8), GFP_KERNEL);
if (!tmp)
return -ENOMEM;
/*
* Our device maybe not reply when heavily loading, We'll retry for
* F81534_USB_MAX_RETRY times.
*/
while (count--) {
status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
F81534_SET_GET_REGISTER,
USB_TYPE_VENDOR | USB_DIR_IN,
reg, 0, tmp, sizeof(u8),
F81534_USB_TIMEOUT);
if (status > 0) {
status = 0;
break;
} else if (status == 0) {
status = -EIO;
}
}
if (status < 0) {
dev_err(&interface->dev, "%s: reg: %x failed: %d\n", __func__,
reg, status);
goto end;
}
*data = *tmp;
end:
kfree(tmp);
return status;
}
static int f81534_set_mask_register(struct usb_serial *serial, u16 reg,
u8 mask, u8 data)
{
int status;
u8 tmp;
status = f81534_get_register(serial, reg, &tmp);
if (status)
return status;
tmp &= ~mask;
tmp |= (mask & data);
return f81534_set_register(serial, reg, tmp);
}
static int f81534_set_phy_port_register(struct usb_serial *serial, int phy,
u16 reg, u8 data)
{
return f81534_set_register(serial, reg + F81534_UART_OFFSET * phy,
data);
}
static int f81534_get_phy_port_register(struct usb_serial *serial, int phy,
u16 reg, u8 *data)
{
return f81534_get_register(serial, reg + F81534_UART_OFFSET * phy,
data);
}
static int f81534_set_port_register(struct usb_serial_port *port, u16 reg,
u8 data)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
return f81534_set_register(port->serial,
reg + port_priv->phy_num * F81534_UART_OFFSET, data);
}
static int f81534_get_port_register(struct usb_serial_port *port, u16 reg,
u8 *data)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
return f81534_get_register(port->serial,
reg + port_priv->phy_num * F81534_UART_OFFSET, data);
}
/*
* If we try to access the internal flash via SPI bus, we should check the bus
* status for every command. e.g., F81534_BUS_REG_START/F81534_BUS_REG_END
*/
static int f81534_wait_for_spi_idle(struct usb_serial *serial)
{
size_t count = F81534_MAX_BUS_RETRY;
u8 tmp;
int status;
do {
status = f81534_get_register(serial, F81534_BUS_REG_STATUS,
&tmp);
if (status)
return status;
if (tmp & F81534_BUS_BUSY)
continue;
if (tmp & F81534_BUS_IDLE)
break;
} while (--count);
if (!count) {
dev_err(&serial->interface->dev,
"%s: timed out waiting for idle SPI bus\n",
__func__);
return -EIO;
}
return f81534_set_register(serial, F81534_BUS_REG_STATUS,
tmp & ~F81534_BUS_IDLE);
}
static int f81534_get_spi_register(struct usb_serial *serial, u16 reg,
u8 *data)
{
int status;
status = f81534_get_register(serial, reg, data);
if (status)
return status;
return f81534_wait_for_spi_idle(serial);
}
static int f81534_set_spi_register(struct usb_serial *serial, u16 reg, u8 data)
{
int status;
status = f81534_set_register(serial, reg, data);
if (status)
return status;
return f81534_wait_for_spi_idle(serial);
}
static int f81534_read_flash(struct usb_serial *serial, u32 address,
size_t size, u8 *buf)
{
u8 tmp_buf[F81534_MAX_DATA_BLOCK];
size_t block = 0;
size_t read_size;
size_t count;
int status;
int offset;
u16 reg_tmp;
status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
F81534_CMD_READ);
if (status)
return status;
status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
(address >> 16) & 0xff);
if (status)
return status;
status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
(address >> 8) & 0xff);
if (status)
return status;
status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
(address >> 0) & 0xff);
if (status)
return status;
/* Continuous read mode */
do {
read_size = min_t(size_t, F81534_MAX_DATA_BLOCK, size);
for (count = 0; count < read_size; ++count) {
/* To write F81534_BUS_REG_END when final byte */
if (size <= F81534_MAX_DATA_BLOCK &&
read_size == count + 1)
reg_tmp = F81534_BUS_REG_END;
else
reg_tmp = F81534_BUS_REG_START;
/*
* Dummy code, force IC to generate a read pulse, the
* set of value 0xf1 is dont care (any value is ok)
*/
status = f81534_set_spi_register(serial, reg_tmp,
0xf1);
if (status)
return status;
status = f81534_get_spi_register(serial,
F81534_BUS_READ_DATA,
&tmp_buf[count]);
if (status)
return status;
offset = count + block * F81534_MAX_DATA_BLOCK;
buf[offset] = tmp_buf[count];
}
size -= read_size;
++block;
} while (size);
return 0;
}
static void f81534_prepare_write_buffer(struct usb_serial_port *port, u8 *buf)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
int phy_num = port_priv->phy_num;
u8 tx_len;
int i;
/*
* The block layout is fixed with 4x128 Bytes, per 128 Bytes a port.
* index 0: port phy idx (e.g., 0,1,2,3)
* index 1: only F81534_TOKEN_WRITE
* index 2: serial TX out length
* index 3: fix to 0
* index 4~127: serial out data block
*/
for (i = 0; i < F81534_NUM_PORT; ++i) {
buf[i * F81534_RECEIVE_BLOCK_SIZE] = i;
buf[i * F81534_RECEIVE_BLOCK_SIZE + 1] = F81534_TOKEN_WRITE;
buf[i * F81534_RECEIVE_BLOCK_SIZE + 2] = 0;
buf[i * F81534_RECEIVE_BLOCK_SIZE + 3] = 0;
}
tx_len = kfifo_out_locked(&port->write_fifo,
&buf[phy_num * F81534_RECEIVE_BLOCK_SIZE + 4],
F81534_MAX_TX_SIZE, &port->lock);
buf[phy_num * F81534_RECEIVE_BLOCK_SIZE + 2] = tx_len;
}
static int f81534_submit_writer(struct usb_serial_port *port, gfp_t mem_flags)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
struct urb *urb;
unsigned long flags;
int result;
/* Check is any data in write_fifo */
spin_lock_irqsave(&port->lock, flags);
if (kfifo_is_empty(&port->write_fifo)) {
spin_unlock_irqrestore(&port->lock, flags);
return 0;
}
spin_unlock_irqrestore(&port->lock, flags);
/* Check H/W is TXEMPTY */
if (!test_and_clear_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty))
return 0;
urb = port->write_urbs[0];
f81534_prepare_write_buffer(port, port->bulk_out_buffers[0]);
urb->transfer_buffer_length = F81534_WRITE_BUFFER_SIZE;
result = usb_submit_urb(urb, mem_flags);
if (result) {
set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
dev_err(&port->dev, "%s: submit failed: %d\n", __func__,
result);
return result;
}
usb_serial_port_softint(port);
return 0;
}
static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate)
{
if (!baudrate)
return 0;
/* Round to nearest divisor */
return DIV_ROUND_CLOSEST(clockrate, baudrate);
}
static int f81534_find_clk(u32 baudrate)
{
int idx;
for (idx = 0; idx < ARRAY_SIZE(baudrate_table); ++idx) {
if (baudrate <= baudrate_table[idx] &&
baudrate_table[idx] % baudrate == 0)
return idx;
}
return -EINVAL;
}
static int f81534_set_port_config(struct usb_serial_port *port,
struct tty_struct *tty, u32 baudrate, u32 old_baudrate, u8 lcr)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
u32 divisor;
int status;
int i;
int idx;
u8 value;
u32 baud_list[] = {baudrate, old_baudrate, F81534_DEFAULT_BAUD_RATE};
for (i = 0; i < ARRAY_SIZE(baud_list); ++i) {
idx = f81534_find_clk(baud_list[i]);
if (idx >= 0) {
baudrate = baud_list[i];
tty_encode_baud_rate(tty, baudrate, baudrate);
break;
}
}
if (idx < 0)
return -EINVAL;
port_priv->baud_base = baudrate_table[idx];
port_priv->shadow_clk &= ~F81534_CLK_MASK;
port_priv->shadow_clk |= clock_table[idx];
status = f81534_set_port_register(port, F81534_CLOCK_REG,
port_priv->shadow_clk);
if (status) {
dev_err(&port->dev, "CLOCK_REG setting failed\n");
return status;
}
if (baudrate <= 1200)
value = F81534_1X_RXTRIGGER; /* 128 FIFO & TL: 1x */
else
value = F81534_8X_RXTRIGGER; /* 128 FIFO & TL: 8x */
status = f81534_set_port_register(port, F81534_CONFIG1_REG, value);
if (status) {
dev_err(&port->dev, "%s: CONFIG1 setting failed\n", __func__);
return status;
}
if (baudrate <= 1200)
value = UART_FCR_TRIGGER_1 | UART_FCR_ENABLE_FIFO; /* TL: 1 */
else
value = UART_FCR_TRIGGER_8 | UART_FCR_ENABLE_FIFO; /* TL: 8 */
status = f81534_set_port_register(port, F81534_FIFO_CONTROL_REG,
value);
if (status) {
dev_err(&port->dev, "%s: FCR setting failed\n", __func__);
return status;
}
divisor = f81534_calc_baud_divisor(baudrate, port_priv->baud_base);
mutex_lock(&port_priv->lcr_mutex);
value = UART_LCR_DLAB;
status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
value);
if (status) {
dev_err(&port->dev, "%s: set LCR failed\n", __func__);
goto out_unlock;
}
value = divisor & 0xff;
status = f81534_set_port_register(port, F81534_DIVISOR_LSB_REG, value);
if (status) {
dev_err(&port->dev, "%s: set DLAB LSB failed\n", __func__);
goto out_unlock;
}
value = (divisor >> 8) & 0xff;
status = f81534_set_port_register(port, F81534_DIVISOR_MSB_REG, value);
if (status) {
dev_err(&port->dev, "%s: set DLAB MSB failed\n", __func__);
goto out_unlock;
}
value = lcr | (port_priv->shadow_lcr & UART_LCR_SBC);
status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
value);
if (status) {
dev_err(&port->dev, "%s: set LCR failed\n", __func__);
goto out_unlock;
}
port_priv->shadow_lcr = value;
out_unlock:
mutex_unlock(&port_priv->lcr_mutex);
return status;
}
static void f81534_break_ctl(struct tty_struct *tty, int break_state)
{
struct usb_serial_port *port = tty->driver_data;
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
int status;
mutex_lock(&port_priv->lcr_mutex);
if (break_state)
port_priv->shadow_lcr |= UART_LCR_SBC;
else
port_priv->shadow_lcr &= ~UART_LCR_SBC;
status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
port_priv->shadow_lcr);
if (status)
dev_err(&port->dev, "set break failed: %d\n", status);
mutex_unlock(&port_priv->lcr_mutex);
}
static int f81534_update_mctrl(struct usb_serial_port *port, unsigned int set,
unsigned int clear)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
int status;
u8 tmp;
if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
return 0; /* no change */
mutex_lock(&port_priv->mcr_mutex);
/* 'Set' takes precedence over 'Clear' */
clear &= ~set;
/* Always enable UART_MCR_OUT2 */
tmp = UART_MCR_OUT2 | port_priv->shadow_mcr;
if (clear & TIOCM_DTR)
tmp &= ~UART_MCR_DTR;
if (clear & TIOCM_RTS)
tmp &= ~UART_MCR_RTS;
if (set & TIOCM_DTR)
tmp |= UART_MCR_DTR;
if (set & TIOCM_RTS)
tmp |= UART_MCR_RTS;
status = f81534_set_port_register(port, F81534_MODEM_CONTROL_REG, tmp);
if (status < 0) {
dev_err(&port->dev, "%s: MCR write failed\n", __func__);
mutex_unlock(&port_priv->mcr_mutex);
return status;
}
port_priv->shadow_mcr = tmp;
mutex_unlock(&port_priv->mcr_mutex);
return 0;
}
/*
* This function will search the data area with token F81534_CUSTOM_VALID_TOKEN
* for latest configuration index. If nothing found
* (*index = F81534_CUSTOM_NO_CUSTOM_DATA), We'll load default configure in
* F81534_DEF_CONF_ADDRESS_START section.
*
* Due to we only use block0 to save data, so *index should be 0 or
* F81534_CUSTOM_NO_CUSTOM_DATA.
*/
static int f81534_find_config_idx(struct usb_serial *serial, u8 *index)
{
u8 tmp;
int status;
status = f81534_read_flash(serial, F81534_CUSTOM_ADDRESS_START, 1,
&tmp);
if (status) {
dev_err(&serial->interface->dev, "%s: read failed: %d\n",
__func__, status);
return status;
}
/* We'll use the custom data when the data is valid. */
if (tmp == F81534_CUSTOM_VALID_TOKEN)
*index = 0;
else
*index = F81534_CUSTOM_NO_CUSTOM_DATA;
return 0;
}
/*
* The F81532/534 will not report serial port to USB serial subsystem when
* H/W DCD/DSR/CTS/RI/RX pin connected to ground.
*
* To detect RX pin status, we'll enable MCR interal loopback, disable it and
* delayed for 60ms. It connected to ground If LSR register report UART_LSR_BI.
*/
static bool f81534_check_port_hw_disabled(struct usb_serial *serial, int phy)
{
int status;
u8 old_mcr;
u8 msr;
u8 lsr;
u8 msr_mask;
msr_mask = UART_MSR_DCD | UART_MSR_RI | UART_MSR_DSR | UART_MSR_CTS;
status = f81534_get_phy_port_register(serial, phy,
F81534_MODEM_STATUS_REG, &msr);
if (status)
return false;
if ((msr & msr_mask) != msr_mask)
return false;
status = f81534_set_phy_port_register(serial, phy,
F81534_FIFO_CONTROL_REG, UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
if (status)
return false;
status = f81534_get_phy_port_register(serial, phy,
F81534_MODEM_CONTROL_REG, &old_mcr);
if (status)
return false;
status = f81534_set_phy_port_register(serial, phy,
F81534_MODEM_CONTROL_REG, UART_MCR_LOOP);
if (status)
return false;
status = f81534_set_phy_port_register(serial, phy,
F81534_MODEM_CONTROL_REG, 0x0);
if (status)
return false;
msleep(60);
status = f81534_get_phy_port_register(serial, phy,
F81534_LINE_STATUS_REG, &lsr);
if (status)
return false;
status = f81534_set_phy_port_register(serial, phy,
F81534_MODEM_CONTROL_REG, old_mcr);
if (status)
return false;
if ((lsr & UART_LSR_BI) == UART_LSR_BI)
return true;
return false;
}
/*
* We had 2 generation of F81532/534 IC. All has an internal storage.
*
* 1st is pure USB-to-TTL RS232 IC and designed for 4 ports only, no any
* internal data will used. All mode and gpio control should manually set
* by AP or Driver and all storage space value are 0xff. The
* f81534_calc_num_ports() will run to final we marked as "oldest version"
* for this IC.
*
* 2rd is designed to more generic to use any transceiver and this is our
* mass production type. We'll save data in F81534_CUSTOM_ADDRESS_START
* (0x2f00) with 9bytes. The 1st byte is a indicater. If the token is
* F81534_CUSTOM_VALID_TOKEN(0xf0), the IC is 2nd gen type, the following
* 4bytes save port mode (0:RS232/1:RS485 Invert/2:RS485), and the last
* 4bytes save GPIO state(value from 0~7 to represent 3 GPIO output pin).
* The f81534_calc_num_ports() will run to "new style" with checking
* F81534_PORT_UNAVAILABLE section.
*/
static int f81534_calc_num_ports(struct usb_serial *serial,
struct usb_serial_endpoints *epds)
{
struct f81534_serial_private *serial_priv;
struct device *dev = &serial->interface->dev;
int size_bulk_in = usb_endpoint_maxp(epds->bulk_in[0]);
int size_bulk_out = usb_endpoint_maxp(epds->bulk_out[0]);
u8 num_port = 0;
int index = 0;
int status;
int i;
if (size_bulk_out != F81534_WRITE_BUFFER_SIZE ||
size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) {
dev_err(dev, "unsupported endpoint max packet size\n");
return -ENODEV;
}
serial_priv = devm_kzalloc(&serial->interface->dev,
sizeof(*serial_priv), GFP_KERNEL);
if (!serial_priv)
return -ENOMEM;
usb_set_serial_data(serial, serial_priv);
mutex_init(&serial_priv->urb_mutex);
/* Check had custom setting */
status = f81534_find_config_idx(serial, &serial_priv->setting_idx);
if (status) {
dev_err(&serial->interface->dev, "%s: find idx failed: %d\n",
__func__, status);
return status;
}
/*
* We'll read custom data only when data available, otherwise we'll
* read default value instead.
*/
if (serial_priv->setting_idx != F81534_CUSTOM_NO_CUSTOM_DATA) {
status = f81534_read_flash(serial,
F81534_CUSTOM_ADDRESS_START +
F81534_CONF_OFFSET,
sizeof(serial_priv->conf_data),
serial_priv->conf_data);
if (status) {
dev_err(&serial->interface->dev,
"%s: get custom data failed: %d\n",
__func__, status);
return status;
}
dev_dbg(&serial->interface->dev,
"%s: read config from block: %d\n", __func__,
serial_priv->setting_idx);
} else {
/* Read default board setting */
status = f81534_read_flash(serial,
F81534_DEF_CONF_ADDRESS_START,
sizeof(serial_priv->conf_data),
serial_priv->conf_data);
if (status) {
dev_err(&serial->interface->dev,
"%s: read failed: %d\n", __func__,
status);
return status;
}
dev_dbg(&serial->interface->dev, "%s: read default config\n",
__func__);
}
/* New style, find all possible ports */
for (i = 0; i < F81534_NUM_PORT; ++i) {
if (f81534_check_port_hw_disabled(serial, i))
serial_priv->conf_data[i] |= F81534_PORT_UNAVAILABLE;
if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
continue;
++num_port;
}
if (!num_port) {
dev_warn(&serial->interface->dev,
"no config found, assuming 4 ports\n");
num_port = 4; /* Nothing found, oldest version IC */
}
/* Assign phy-to-logic mapping */
for (i = 0; i < F81534_NUM_PORT; ++i) {
if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
continue;
serial_priv->tty_idx[i] = index++;
dev_dbg(&serial->interface->dev,
"%s: phy_num: %d, tty_idx: %d\n", __func__, i,
serial_priv->tty_idx[i]);
}
/*
* Setup bulk-out endpoint multiplexing. All ports share the same
* bulk-out endpoint.
*/
BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < F81534_NUM_PORT);
for (i = 1; i < num_port; ++i)
epds->bulk_out[i] = epds->bulk_out[0];
epds->num_bulk_out = num_port;
return num_port;
}
static void f81534_set_termios(struct tty_struct *tty,
struct usb_serial_port *port,
struct ktermios *old_termios)
{
u8 new_lcr = 0;
int status;
u32 baud;
u32 old_baud;
if (C_BAUD(tty) == B0)
f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
if (C_PARENB(tty)) {
new_lcr |= UART_LCR_PARITY;
if (!C_PARODD(tty))
new_lcr |= UART_LCR_EPAR;
if (C_CMSPAR(tty))
new_lcr |= UART_LCR_SPAR;
}
if (C_CSTOPB(tty))
new_lcr |= UART_LCR_STOP;
switch (C_CSIZE(tty)) {
case CS5:
new_lcr |= UART_LCR_WLEN5;
break;
case CS6:
new_lcr |= UART_LCR_WLEN6;
break;
case CS7:
new_lcr |= UART_LCR_WLEN7;
break;
default:
case CS8:
new_lcr |= UART_LCR_WLEN8;
break;
}
baud = tty_get_baud_rate(tty);
if (!baud)
return;
if (old_termios)
old_baud = tty_termios_baud_rate(old_termios);
else
old_baud = F81534_DEFAULT_BAUD_RATE;
dev_dbg(&port->dev, "%s: baud: %d\n", __func__, baud);
status = f81534_set_port_config(port, tty, baud, old_baud, new_lcr);
if (status < 0) {
dev_err(&port->dev, "%s: set port config failed: %d\n",
__func__, status);
}
}
static int f81534_submit_read_urb(struct usb_serial *serial, gfp_t flags)
{
return usb_serial_generic_submit_read_urbs(serial->port[0], flags);
}
static void f81534_msr_changed(struct usb_serial_port *port, u8 msr)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
unsigned long flags;
u8 old_msr;
if (!(msr & UART_MSR_ANY_DELTA))
return;
spin_lock_irqsave(&port_priv->msr_lock, flags);
old_msr = port_priv->shadow_msr;
port_priv->shadow_msr = msr;
spin_unlock_irqrestore(&port_priv->msr_lock, flags);
dev_dbg(&port->dev, "%s: MSR from %02x to %02x\n", __func__, old_msr,
msr);
/* Update input line counters */
if (msr & UART_MSR_DCTS)
port->icount.cts++;
if (msr & UART_MSR_DDSR)
port->icount.dsr++;
if (msr & UART_MSR_DDCD)
port->icount.dcd++;
if (msr & UART_MSR_TERI)
port->icount.rng++;
wake_up_interruptible(&port->port.delta_msr_wait);
if (!(msr & UART_MSR_DDCD))
return;
dev_dbg(&port->dev, "%s: DCD Changed: phy_num: %d from %x to %x\n",
__func__, port_priv->phy_num, old_msr, msr);
tty = tty_port_tty_get(&port->port);
if (!tty)
return;
usb_serial_handle_dcd_change(port, tty, msr & UART_MSR_DCD);
tty_kref_put(tty);
}
static int f81534_read_msr(struct usb_serial_port *port)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
unsigned long flags;
int status;
u8 msr;
/* Get MSR initial value */
status = f81534_get_port_register(port, F81534_MODEM_STATUS_REG, &msr);
if (status)
return status;
/* Force update current state */
spin_lock_irqsave(&port_priv->msr_lock, flags);
port_priv->shadow_msr = msr;
spin_unlock_irqrestore(&port_priv->msr_lock, flags);
return 0;
}
static int f81534_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct f81534_serial_private *serial_priv =
usb_get_serial_data(port->serial);
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
int status;
status = f81534_set_port_register(port,
F81534_FIFO_CONTROL_REG, UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
if (status) {
dev_err(&port->dev, "%s: Clear FIFO failed: %d\n", __func__,
status);
return status;
}
if (tty)
f81534_set_termios(tty, port, NULL);
status = f81534_read_msr(port);
if (status)
return status;
mutex_lock(&serial_priv->urb_mutex);
/* Submit Read URBs for first port opened */
if (!serial_priv->opened_port) {
status = f81534_submit_read_urb(port->serial, GFP_KERNEL);
if (status)
goto exit;
}
serial_priv->opened_port++;
exit:
mutex_unlock(&serial_priv->urb_mutex);
set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
return status;
}
static void f81534_close(struct usb_serial_port *port)
{
struct f81534_serial_private *serial_priv =
usb_get_serial_data(port->serial);
struct usb_serial_port *port0 = port->serial->port[0];
unsigned long flags;
size_t i;
usb_kill_urb(port->write_urbs[0]);
spin_lock_irqsave(&port->lock, flags);
kfifo_reset_out(&port->write_fifo);
spin_unlock_irqrestore(&port->lock, flags);
/* Kill Read URBs when final port closed */
mutex_lock(&serial_priv->urb_mutex);
serial_priv->opened_port--;
if (!serial_priv->opened_port) {
for (i = 0; i < ARRAY_SIZE(port0->read_urbs); ++i)
usb_kill_urb(port0->read_urbs[i]);
}
mutex_unlock(&serial_priv->urb_mutex);
}
static int f81534_get_serial_info(struct tty_struct *tty,
struct serial_struct *ss)
{
struct usb_serial_port *port = tty->driver_data;
struct f81534_port_private *port_priv;
port_priv = usb_get_serial_port_data(port);
ss->type = PORT_16550A;
ss->port = port->port_number;
ss->line = port->minor;
ss->baud_base = port_priv->baud_base;
return 0;
}
static void f81534_process_per_serial_block(struct usb_serial_port *port,
u8 *data)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
int phy_num = data[0];
size_t read_size = 0;
size_t i;
char tty_flag;
int status;
u8 lsr;
/*
* The block layout is 128 Bytes
* index 0: port phy idx (e.g., 0,1,2,3),
* index 1: It's could be
* F81534_TOKEN_RECEIVE
* F81534_TOKEN_TX_EMPTY
* F81534_TOKEN_MSR_CHANGE
* index 2: serial in size (data+lsr, must be even)
* meaningful for F81534_TOKEN_RECEIVE only
* index 3: current MSR with this device
* index 4~127: serial in data block (data+lsr, must be even)
*/
switch (data[1]) {
case F81534_TOKEN_TX_EMPTY:
set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
/* Try to submit writer */
status = f81534_submit_writer(port, GFP_ATOMIC);
if (status)
dev_err(&port->dev, "%s: submit failed\n", __func__);
return;
case F81534_TOKEN_MSR_CHANGE:
f81534_msr_changed(port, data[3]);
return;
case F81534_TOKEN_RECEIVE:
read_size = data[2];
if (read_size > F81534_MAX_RX_SIZE) {
dev_err(&port->dev,
"%s: phy: %d read_size: %zu larger than: %d\n",
__func__, phy_num, read_size,
F81534_MAX_RX_SIZE);
return;
}
break;
default:
dev_warn(&port->dev, "%s: unknown token: %02x\n", __func__,
data[1]);
return;
}
for (i = 4; i < 4 + read_size; i += 2) {
tty_flag = TTY_NORMAL;
lsr = data[i + 1];
if (lsr & UART_LSR_BRK_ERROR_BITS) {
if (lsr & UART_LSR_BI) {
tty_flag = TTY_BREAK;
port->icount.brk++;
usb_serial_handle_break(port);
} else if (lsr & UART_LSR_PE) {
tty_flag = TTY_PARITY;
port->icount.parity++;
} else if (lsr & UART_LSR_FE) {
tty_flag = TTY_FRAME;
port->icount.frame++;
}
if (lsr & UART_LSR_OE) {
port->icount.overrun++;
tty_insert_flip_char(&port->port, 0,
TTY_OVERRUN);
}
schedule_work(&port_priv->lsr_work);
}
if (port->port.console && port->sysrq) {
if (usb_serial_handle_sysrq_char(port, data[i]))
continue;
}
tty_insert_flip_char(&port->port, data[i], tty_flag);
}
tty_flip_buffer_push(&port->port);
}
static void f81534_process_read_urb(struct urb *urb)
{
struct f81534_serial_private *serial_priv;
struct usb_serial_port *port;
struct usb_serial *serial;
u8 *buf;
int phy_port_num;
int tty_port_num;
size_t i;
if (!urb->actual_length ||
urb->actual_length % F81534_RECEIVE_BLOCK_SIZE) {
return;
}
port = urb->context;
serial = port->serial;
buf = urb->transfer_buffer;
serial_priv = usb_get_serial_data(serial);
for (i = 0; i < urb->actual_length; i += F81534_RECEIVE_BLOCK_SIZE) {
phy_port_num = buf[i];
if (phy_port_num >= F81534_NUM_PORT) {
dev_err(&port->dev,
"%s: phy_port_num: %d larger than: %d\n",
__func__, phy_port_num, F81534_NUM_PORT);
continue;
}
tty_port_num = serial_priv->tty_idx[phy_port_num];
port = serial->port[tty_port_num];
if (tty_port_initialized(&port->port))
f81534_process_per_serial_block(port, &buf[i]);
}
}
static void f81534_write_usb_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
switch (urb->status) {
case 0:
break;
case -ENOENT:
case -ECONNRESET:
case -ESHUTDOWN:
dev_dbg(&port->dev, "%s - urb stopped: %d\n",
__func__, urb->status);
return;
case -EPIPE:
dev_err(&port->dev, "%s - urb stopped: %d\n",
__func__, urb->status);
return;
default:
dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
__func__, urb->status);
break;
}
}
static void f81534_lsr_worker(struct work_struct *work)
{
struct f81534_port_private *port_priv;
struct usb_serial_port *port;
int status;
u8 tmp;
port_priv = container_of(work, struct f81534_port_private, lsr_work);
port = port_priv->port;
status = f81534_get_port_register(port, F81534_LINE_STATUS_REG, &tmp);
if (status)
dev_warn(&port->dev, "read LSR failed: %d\n", status);
}
static int f81534_set_port_output_pin(struct usb_serial_port *port)
{
struct f81534_serial_private *serial_priv;
struct f81534_port_private *port_priv;
struct usb_serial *serial;
const struct f81534_port_out_pin *pins;
int status;
int i;
u8 value;
u8 idx;
serial = port->serial;
serial_priv = usb_get_serial_data(serial);
port_priv = usb_get_serial_port_data(port);
idx = F81534_CONF_INIT_GPIO_OFFSET + port_priv->phy_num;
value = serial_priv->conf_data[idx];
if (value >= F81534_CONF_GPIO_SHUTDOWN) {
/*
* Newer IC configure will make transceiver in shutdown mode on
* initial power on. We need enable it before using UARTs.
*/
idx = F81534_CONF_WORK_GPIO_OFFSET + port_priv->phy_num;
value = serial_priv->conf_data[idx];
if (value >= F81534_CONF_GPIO_SHUTDOWN)
value = F81534_CONF_GPIO_RS232;
}
pins = &f81534_port_out_pins[port_priv->phy_num];
for (i = 0; i < ARRAY_SIZE(pins->pin); ++i) {
status = f81534_set_mask_register(serial,
pins->pin[i].reg_addr, pins->pin[i].reg_mask,
value & BIT(i) ? pins->pin[i].reg_mask : 0);
if (status)
return status;
}
dev_dbg(&port->dev, "Output pin (M0/M1/M2): %d\n", value);
return 0;
}
static int f81534_port_probe(struct usb_serial_port *port)
{
struct f81534_serial_private *serial_priv;
struct f81534_port_private *port_priv;
int ret;
u8 value;
serial_priv = usb_get_serial_data(port->serial);
port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
if (!port_priv)
return -ENOMEM;
/*
* We'll make tx frame error when baud rate from 384~500kps. So we'll
* delay all tx data frame with 1bit.
*/
port_priv->shadow_clk = F81534_UART_EN | F81534_CLK_TX_DELAY_1BIT;
spin_lock_init(&port_priv->msr_lock);
mutex_init(&port_priv->mcr_mutex);
mutex_init(&port_priv->lcr_mutex);
INIT_WORK(&port_priv->lsr_work, f81534_lsr_worker);
/* Assign logic-to-phy mapping */
ret = f81534_logic_to_phy_port(port->serial, port);
if (ret < 0)
return ret;
port_priv->phy_num = ret;
port_priv->port = port;
usb_set_serial_port_data(port, port_priv);
dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
port->port_number, port_priv->phy_num);
/*
* The F81532/534 will hang-up when enable LSR interrupt in IER and
* occur data overrun. So we'll disable the LSR interrupt in probe()
* and submit the LSR worker to clear LSR state when reported LSR error
* bit with bulk-in data in f81534_process_per_serial_block().
*/
ret = f81534_set_port_register(port, F81534_INTERRUPT_ENABLE_REG,
UART_IER_RDI | UART_IER_THRI | UART_IER_MSI);
if (ret)
return ret;
value = serial_priv->conf_data[port_priv->phy_num];
switch (value & F81534_PORT_CONF_MODE_MASK) {
case F81534_PORT_CONF_RS485_INVERT:
port_priv->shadow_clk |= F81534_CLK_RS485_MODE |
F81534_CLK_RS485_INVERT;
dev_dbg(&port->dev, "RS485 invert mode\n");
break;
case F81534_PORT_CONF_RS485:
port_priv->shadow_clk |= F81534_CLK_RS485_MODE;
dev_dbg(&port->dev, "RS485 mode\n");
break;
default:
case F81534_PORT_CONF_RS232:
dev_dbg(&port->dev, "RS232 mode\n");
break;
}
return f81534_set_port_output_pin(port);
}
static int f81534_port_remove(struct usb_serial_port *port)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
flush_work(&port_priv->lsr_work);
return 0;
}
static int f81534_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
int status;
int r;
u8 msr;
u8 mcr;
/* Read current MSR from device */
status = f81534_get_port_register(port, F81534_MODEM_STATUS_REG, &msr);
if (status)
return status;
mutex_lock(&port_priv->mcr_mutex);
mcr = port_priv->shadow_mcr;
mutex_unlock(&port_priv->mcr_mutex);
r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
(mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
(msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
(msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
(msr & UART_MSR_RI ? TIOCM_RI : 0) |
(msr & UART_MSR_DSR ? TIOCM_DSR : 0);
return r;
}
static int f81534_tiocmset(struct tty_struct *tty, unsigned int set,
unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
return f81534_update_mctrl(port, set, clear);
}
static void f81534_dtr_rts(struct usb_serial_port *port, int on)
{
if (on)
f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
else
f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
}
static int f81534_write(struct tty_struct *tty, struct usb_serial_port *port,
const u8 *buf, int count)
{
int bytes_out, status;
if (!count)
return 0;
bytes_out = kfifo_in_locked(&port->write_fifo, buf, count,
&port->lock);
status = f81534_submit_writer(port, GFP_ATOMIC);
if (status) {
dev_err(&port->dev, "%s: submit failed\n", __func__);
return status;
}
return bytes_out;
}
static bool f81534_tx_empty(struct usb_serial_port *port)
{
struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
return test_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
}
static int f81534_resume(struct usb_serial *serial)
{
struct f81534_serial_private *serial_priv =
usb_get_serial_data(serial);
struct usb_serial_port *port;
int error = 0;
int status;
size_t i;
/*
* We'll register port 0 bulkin when port had opened, It'll take all
* port received data, MSR register change and TX_EMPTY information.
*/
mutex_lock(&serial_priv->urb_mutex);
if (serial_priv->opened_port) {
status = f81534_submit_read_urb(serial, GFP_NOIO);
if (status) {
mutex_unlock(&serial_priv->urb_mutex);
return status;
}
}
mutex_unlock(&serial_priv->urb_mutex);
for (i = 0; i < serial->num_ports; i++) {
port = serial->port[i];
if (!tty_port_initialized(&port->port))
continue;
status = f81534_submit_writer(port, GFP_NOIO);
if (status) {
dev_err(&port->dev, "%s: submit failed\n", __func__);
++error;
}
}
if (error)
return -EIO;
return 0;
}
static struct usb_serial_driver f81534_device = {
.driver = {
.owner = THIS_MODULE,
.name = "f81534",
},
.description = DRIVER_DESC,
.id_table = f81534_id_table,
.num_bulk_in = 1,
.num_bulk_out = 1,
.open = f81534_open,
.close = f81534_close,
.write = f81534_write,
.tx_empty = f81534_tx_empty,
.calc_num_ports = f81534_calc_num_ports,
.port_probe = f81534_port_probe,
.port_remove = f81534_port_remove,
.break_ctl = f81534_break_ctl,
.dtr_rts = f81534_dtr_rts,
.process_read_urb = f81534_process_read_urb,
.get_serial = f81534_get_serial_info,
.tiocmget = f81534_tiocmget,
.tiocmset = f81534_tiocmset,
.write_bulk_callback = f81534_write_usb_callback,
.set_termios = f81534_set_termios,
.resume = f81534_resume,
};
static struct usb_serial_driver *const serial_drivers[] = {
&f81534_device, NULL
};
module_usb_serial_driver(serial_drivers, f81534_id_table);
MODULE_DEVICE_TABLE(usb, f81534_id_table);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR("Peter Hong <Peter_Hong@fintek.com.tw>");
MODULE_AUTHOR("Tom Tsai <Tom_Tsai@fintek.com.tw>");
MODULE_LICENSE("GPL");
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку