615 строки
16 KiB
C
615 строки
16 KiB
C
/* linux/arch/arm/mach-exynos4/mct.c
|
|
*
|
|
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*
|
|
* EXYNOS4 MCT(Multi-Core Timer) support
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/sched.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/percpu.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/sched_clock.h>
|
|
|
|
#define EXYNOS4_MCTREG(x) (x)
|
|
#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
|
|
#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
|
|
#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
|
|
#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
|
|
#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
|
|
#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
|
|
#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
|
|
#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
|
|
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
|
|
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
|
|
#define _EXYNOS4_MCT_L_BASE EXYNOS4_MCTREG(0x300)
|
|
#define EXYNOS4_MCT_L_BASE(x) (_EXYNOS4_MCT_L_BASE + (0x100 * x))
|
|
#define EXYNOS4_MCT_L_MASK (0xffffff00)
|
|
|
|
#define MCT_L_TCNTB_OFFSET (0x00)
|
|
#define MCT_L_ICNTB_OFFSET (0x08)
|
|
#define MCT_L_TCON_OFFSET (0x20)
|
|
#define MCT_L_INT_CSTAT_OFFSET (0x30)
|
|
#define MCT_L_INT_ENB_OFFSET (0x34)
|
|
#define MCT_L_WSTAT_OFFSET (0x40)
|
|
#define MCT_G_TCON_START (1 << 8)
|
|
#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
|
|
#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
|
|
#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
|
|
#define MCT_L_TCON_INT_START (1 << 1)
|
|
#define MCT_L_TCON_TIMER_START (1 << 0)
|
|
|
|
#define TICK_BASE_CNT 1
|
|
|
|
enum {
|
|
MCT_INT_SPI,
|
|
MCT_INT_PPI
|
|
};
|
|
|
|
enum {
|
|
MCT_G0_IRQ,
|
|
MCT_G1_IRQ,
|
|
MCT_G2_IRQ,
|
|
MCT_G3_IRQ,
|
|
MCT_L0_IRQ,
|
|
MCT_L1_IRQ,
|
|
MCT_L2_IRQ,
|
|
MCT_L3_IRQ,
|
|
MCT_L4_IRQ,
|
|
MCT_L5_IRQ,
|
|
MCT_L6_IRQ,
|
|
MCT_L7_IRQ,
|
|
MCT_NR_IRQS,
|
|
};
|
|
|
|
static void __iomem *reg_base;
|
|
static unsigned long clk_rate;
|
|
static unsigned int mct_int_type;
|
|
static int mct_irqs[MCT_NR_IRQS];
|
|
|
|
struct mct_clock_event_device {
|
|
struct clock_event_device evt;
|
|
unsigned long base;
|
|
char name[10];
|
|
};
|
|
|
|
static void exynos4_mct_write(unsigned int value, unsigned long offset)
|
|
{
|
|
unsigned long stat_addr;
|
|
u32 mask;
|
|
u32 i;
|
|
|
|
writel_relaxed(value, reg_base + offset);
|
|
|
|
if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
|
|
stat_addr = (offset & EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
|
|
switch (offset & ~EXYNOS4_MCT_L_MASK) {
|
|
case MCT_L_TCON_OFFSET:
|
|
mask = 1 << 3; /* L_TCON write status */
|
|
break;
|
|
case MCT_L_ICNTB_OFFSET:
|
|
mask = 1 << 1; /* L_ICNTB write status */
|
|
break;
|
|
case MCT_L_TCNTB_OFFSET:
|
|
mask = 1 << 0; /* L_TCNTB write status */
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
} else {
|
|
switch (offset) {
|
|
case EXYNOS4_MCT_G_TCON:
|
|
stat_addr = EXYNOS4_MCT_G_WSTAT;
|
|
mask = 1 << 16; /* G_TCON write status */
|
|
break;
|
|
case EXYNOS4_MCT_G_COMP0_L:
|
|
stat_addr = EXYNOS4_MCT_G_WSTAT;
|
|
mask = 1 << 0; /* G_COMP0_L write status */
|
|
break;
|
|
case EXYNOS4_MCT_G_COMP0_U:
|
|
stat_addr = EXYNOS4_MCT_G_WSTAT;
|
|
mask = 1 << 1; /* G_COMP0_U write status */
|
|
break;
|
|
case EXYNOS4_MCT_G_COMP0_ADD_INCR:
|
|
stat_addr = EXYNOS4_MCT_G_WSTAT;
|
|
mask = 1 << 2; /* G_COMP0_ADD_INCR w status */
|
|
break;
|
|
case EXYNOS4_MCT_G_CNT_L:
|
|
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
|
|
mask = 1 << 0; /* G_CNT_L write status */
|
|
break;
|
|
case EXYNOS4_MCT_G_CNT_U:
|
|
stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
|
|
mask = 1 << 1; /* G_CNT_U write status */
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Wait maximum 1 ms until written values are applied */
|
|
for (i = 0; i < loops_per_jiffy / 1000 * HZ; i++)
|
|
if (readl_relaxed(reg_base + stat_addr) & mask) {
|
|
writel_relaxed(mask, reg_base + stat_addr);
|
|
return;
|
|
}
|
|
|
|
panic("MCT hangs after writing %d (offset:0x%lx)\n", value, offset);
|
|
}
|
|
|
|
/* Clocksource handling */
|
|
static void exynos4_mct_frc_start(void)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
|
|
reg |= MCT_G_TCON_START;
|
|
exynos4_mct_write(reg, EXYNOS4_MCT_G_TCON);
|
|
}
|
|
|
|
/**
|
|
* exynos4_read_count_64 - Read all 64-bits of the global counter
|
|
*
|
|
* This will read all 64-bits of the global counter taking care to make sure
|
|
* that the upper and lower half match. Note that reading the MCT can be quite
|
|
* slow (hundreds of nanoseconds) so you should use the 32-bit (lower half
|
|
* only) version when possible.
|
|
*
|
|
* Returns the number of cycles in the global counter.
|
|
*/
|
|
static u64 exynos4_read_count_64(void)
|
|
{
|
|
unsigned int lo, hi;
|
|
u32 hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
|
|
|
|
do {
|
|
hi = hi2;
|
|
lo = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L);
|
|
hi2 = readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_U);
|
|
} while (hi != hi2);
|
|
|
|
return ((u64)hi << 32) | lo;
|
|
}
|
|
|
|
/**
|
|
* exynos4_read_count_32 - Read the lower 32-bits of the global counter
|
|
*
|
|
* This will read just the lower 32-bits of the global counter. This is marked
|
|
* as notrace so it can be used by the scheduler clock.
|
|
*
|
|
* Returns the number of cycles in the global counter (lower 32 bits).
|
|
*/
|
|
static u32 notrace exynos4_read_count_32(void)
|
|
{
|
|
return readl_relaxed(reg_base + EXYNOS4_MCT_G_CNT_L);
|
|
}
|
|
|
|
static u64 exynos4_frc_read(struct clocksource *cs)
|
|
{
|
|
return exynos4_read_count_32();
|
|
}
|
|
|
|
static void exynos4_frc_resume(struct clocksource *cs)
|
|
{
|
|
exynos4_mct_frc_start();
|
|
}
|
|
|
|
static struct clocksource mct_frc = {
|
|
.name = "mct-frc",
|
|
.rating = 400,
|
|
.read = exynos4_frc_read,
|
|
.mask = CLOCKSOURCE_MASK(32),
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
.resume = exynos4_frc_resume,
|
|
};
|
|
|
|
static u64 notrace exynos4_read_sched_clock(void)
|
|
{
|
|
return exynos4_read_count_32();
|
|
}
|
|
|
|
#if defined(CONFIG_ARM)
|
|
static struct delay_timer exynos4_delay_timer;
|
|
|
|
static cycles_t exynos4_read_current_timer(void)
|
|
{
|
|
BUILD_BUG_ON_MSG(sizeof(cycles_t) != sizeof(u32),
|
|
"cycles_t needs to move to 32-bit for ARM64 usage");
|
|
return exynos4_read_count_32();
|
|
}
|
|
#endif
|
|
|
|
static int __init exynos4_clocksource_init(void)
|
|
{
|
|
exynos4_mct_frc_start();
|
|
|
|
#if defined(CONFIG_ARM)
|
|
exynos4_delay_timer.read_current_timer = &exynos4_read_current_timer;
|
|
exynos4_delay_timer.freq = clk_rate;
|
|
register_current_timer_delay(&exynos4_delay_timer);
|
|
#endif
|
|
|
|
if (clocksource_register_hz(&mct_frc, clk_rate))
|
|
panic("%s: can't register clocksource\n", mct_frc.name);
|
|
|
|
sched_clock_register(exynos4_read_sched_clock, 32, clk_rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos4_mct_comp0_stop(void)
|
|
{
|
|
unsigned int tcon;
|
|
|
|
tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
|
|
tcon &= ~(MCT_G_TCON_COMP0_ENABLE | MCT_G_TCON_COMP0_AUTO_INC);
|
|
|
|
exynos4_mct_write(tcon, EXYNOS4_MCT_G_TCON);
|
|
exynos4_mct_write(0, EXYNOS4_MCT_G_INT_ENB);
|
|
}
|
|
|
|
static void exynos4_mct_comp0_start(bool periodic, unsigned long cycles)
|
|
{
|
|
unsigned int tcon;
|
|
u64 comp_cycle;
|
|
|
|
tcon = readl_relaxed(reg_base + EXYNOS4_MCT_G_TCON);
|
|
|
|
if (periodic) {
|
|
tcon |= MCT_G_TCON_COMP0_AUTO_INC;
|
|
exynos4_mct_write(cycles, EXYNOS4_MCT_G_COMP0_ADD_INCR);
|
|
}
|
|
|
|
comp_cycle = exynos4_read_count_64() + cycles;
|
|
exynos4_mct_write((u32)comp_cycle, EXYNOS4_MCT_G_COMP0_L);
|
|
exynos4_mct_write((u32)(comp_cycle >> 32), EXYNOS4_MCT_G_COMP0_U);
|
|
|
|
exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_ENB);
|
|
|
|
tcon |= MCT_G_TCON_COMP0_ENABLE;
|
|
exynos4_mct_write(tcon , EXYNOS4_MCT_G_TCON);
|
|
}
|
|
|
|
static int exynos4_comp_set_next_event(unsigned long cycles,
|
|
struct clock_event_device *evt)
|
|
{
|
|
exynos4_mct_comp0_start(false, cycles);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mct_set_state_shutdown(struct clock_event_device *evt)
|
|
{
|
|
exynos4_mct_comp0_stop();
|
|
return 0;
|
|
}
|
|
|
|
static int mct_set_state_periodic(struct clock_event_device *evt)
|
|
{
|
|
unsigned long cycles_per_jiffy;
|
|
|
|
cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
|
|
>> evt->shift);
|
|
exynos4_mct_comp0_stop();
|
|
exynos4_mct_comp0_start(true, cycles_per_jiffy);
|
|
return 0;
|
|
}
|
|
|
|
static struct clock_event_device mct_comp_device = {
|
|
.name = "mct-comp",
|
|
.features = CLOCK_EVT_FEAT_PERIODIC |
|
|
CLOCK_EVT_FEAT_ONESHOT,
|
|
.rating = 250,
|
|
.set_next_event = exynos4_comp_set_next_event,
|
|
.set_state_periodic = mct_set_state_periodic,
|
|
.set_state_shutdown = mct_set_state_shutdown,
|
|
.set_state_oneshot = mct_set_state_shutdown,
|
|
.set_state_oneshot_stopped = mct_set_state_shutdown,
|
|
.tick_resume = mct_set_state_shutdown,
|
|
};
|
|
|
|
static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
exynos4_mct_write(0x1, EXYNOS4_MCT_G_INT_CSTAT);
|
|
|
|
evt->event_handler(evt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction mct_comp_event_irq = {
|
|
.name = "mct_comp_irq",
|
|
.flags = IRQF_TIMER | IRQF_IRQPOLL,
|
|
.handler = exynos4_mct_comp_isr,
|
|
.dev_id = &mct_comp_device,
|
|
};
|
|
|
|
static int exynos4_clockevent_init(void)
|
|
{
|
|
mct_comp_device.cpumask = cpumask_of(0);
|
|
clockevents_config_and_register(&mct_comp_device, clk_rate,
|
|
0xf, 0xffffffff);
|
|
setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
|
|
|
|
/* Clock event handling */
|
|
static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
|
|
{
|
|
unsigned long tmp;
|
|
unsigned long mask = MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START;
|
|
unsigned long offset = mevt->base + MCT_L_TCON_OFFSET;
|
|
|
|
tmp = readl_relaxed(reg_base + offset);
|
|
if (tmp & mask) {
|
|
tmp &= ~mask;
|
|
exynos4_mct_write(tmp, offset);
|
|
}
|
|
}
|
|
|
|
static void exynos4_mct_tick_start(unsigned long cycles,
|
|
struct mct_clock_event_device *mevt)
|
|
{
|
|
unsigned long tmp;
|
|
|
|
exynos4_mct_tick_stop(mevt);
|
|
|
|
tmp = (1 << 31) | cycles; /* MCT_L_UPDATE_ICNTB */
|
|
|
|
/* update interrupt count buffer */
|
|
exynos4_mct_write(tmp, mevt->base + MCT_L_ICNTB_OFFSET);
|
|
|
|
/* enable MCT tick interrupt */
|
|
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_ENB_OFFSET);
|
|
|
|
tmp = readl_relaxed(reg_base + mevt->base + MCT_L_TCON_OFFSET);
|
|
tmp |= MCT_L_TCON_INT_START | MCT_L_TCON_TIMER_START |
|
|
MCT_L_TCON_INTERVAL_MODE;
|
|
exynos4_mct_write(tmp, mevt->base + MCT_L_TCON_OFFSET);
|
|
}
|
|
|
|
static int exynos4_tick_set_next_event(unsigned long cycles,
|
|
struct clock_event_device *evt)
|
|
{
|
|
struct mct_clock_event_device *mevt;
|
|
|
|
mevt = container_of(evt, struct mct_clock_event_device, evt);
|
|
exynos4_mct_tick_start(cycles, mevt);
|
|
return 0;
|
|
}
|
|
|
|
static int set_state_shutdown(struct clock_event_device *evt)
|
|
{
|
|
struct mct_clock_event_device *mevt;
|
|
|
|
mevt = container_of(evt, struct mct_clock_event_device, evt);
|
|
exynos4_mct_tick_stop(mevt);
|
|
return 0;
|
|
}
|
|
|
|
static int set_state_periodic(struct clock_event_device *evt)
|
|
{
|
|
struct mct_clock_event_device *mevt;
|
|
unsigned long cycles_per_jiffy;
|
|
|
|
mevt = container_of(evt, struct mct_clock_event_device, evt);
|
|
cycles_per_jiffy = (((unsigned long long)NSEC_PER_SEC / HZ * evt->mult)
|
|
>> evt->shift);
|
|
exynos4_mct_tick_stop(mevt);
|
|
exynos4_mct_tick_start(cycles_per_jiffy, mevt);
|
|
return 0;
|
|
}
|
|
|
|
static void exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
|
|
{
|
|
/*
|
|
* This is for supporting oneshot mode.
|
|
* Mct would generate interrupt periodically
|
|
* without explicit stopping.
|
|
*/
|
|
if (!clockevent_state_periodic(&mevt->evt))
|
|
exynos4_mct_tick_stop(mevt);
|
|
|
|
/* Clear the MCT tick interrupt */
|
|
if (readl_relaxed(reg_base + mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1)
|
|
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
|
|
}
|
|
|
|
static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
|
|
{
|
|
struct mct_clock_event_device *mevt = dev_id;
|
|
struct clock_event_device *evt = &mevt->evt;
|
|
|
|
exynos4_mct_tick_clear(mevt);
|
|
|
|
evt->event_handler(evt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int exynos4_mct_starting_cpu(unsigned int cpu)
|
|
{
|
|
struct mct_clock_event_device *mevt =
|
|
per_cpu_ptr(&percpu_mct_tick, cpu);
|
|
struct clock_event_device *evt = &mevt->evt;
|
|
|
|
mevt->base = EXYNOS4_MCT_L_BASE(cpu);
|
|
snprintf(mevt->name, sizeof(mevt->name), "mct_tick%d", cpu);
|
|
|
|
evt->name = mevt->name;
|
|
evt->cpumask = cpumask_of(cpu);
|
|
evt->set_next_event = exynos4_tick_set_next_event;
|
|
evt->set_state_periodic = set_state_periodic;
|
|
evt->set_state_shutdown = set_state_shutdown;
|
|
evt->set_state_oneshot = set_state_shutdown;
|
|
evt->set_state_oneshot_stopped = set_state_shutdown;
|
|
evt->tick_resume = set_state_shutdown;
|
|
evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
|
|
evt->rating = 450;
|
|
|
|
exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
|
|
|
|
if (mct_int_type == MCT_INT_SPI) {
|
|
|
|
if (evt->irq == -1)
|
|
return -EIO;
|
|
|
|
irq_force_affinity(evt->irq, cpumask_of(cpu));
|
|
enable_irq(evt->irq);
|
|
} else {
|
|
enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0);
|
|
}
|
|
clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
|
|
0xf, 0x7fffffff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos4_mct_dying_cpu(unsigned int cpu)
|
|
{
|
|
struct mct_clock_event_device *mevt =
|
|
per_cpu_ptr(&percpu_mct_tick, cpu);
|
|
struct clock_event_device *evt = &mevt->evt;
|
|
|
|
evt->set_state_shutdown(evt);
|
|
if (mct_int_type == MCT_INT_SPI) {
|
|
if (evt->irq != -1)
|
|
disable_irq_nosync(evt->irq);
|
|
exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
|
|
} else {
|
|
disable_percpu_irq(mct_irqs[MCT_L0_IRQ]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int __init exynos4_timer_resources(struct device_node *np, void __iomem *base)
|
|
{
|
|
int err, cpu;
|
|
struct clk *mct_clk, *tick_clk;
|
|
|
|
tick_clk = np ? of_clk_get_by_name(np, "fin_pll") :
|
|
clk_get(NULL, "fin_pll");
|
|
if (IS_ERR(tick_clk))
|
|
panic("%s: unable to determine tick clock rate\n", __func__);
|
|
clk_rate = clk_get_rate(tick_clk);
|
|
|
|
mct_clk = np ? of_clk_get_by_name(np, "mct") : clk_get(NULL, "mct");
|
|
if (IS_ERR(mct_clk))
|
|
panic("%s: unable to retrieve mct clock instance\n", __func__);
|
|
clk_prepare_enable(mct_clk);
|
|
|
|
reg_base = base;
|
|
if (!reg_base)
|
|
panic("%s: unable to ioremap mct address space\n", __func__);
|
|
|
|
if (mct_int_type == MCT_INT_PPI) {
|
|
|
|
err = request_percpu_irq(mct_irqs[MCT_L0_IRQ],
|
|
exynos4_mct_tick_isr, "MCT",
|
|
&percpu_mct_tick);
|
|
WARN(err, "MCT: can't request IRQ %d (%d)\n",
|
|
mct_irqs[MCT_L0_IRQ], err);
|
|
} else {
|
|
for_each_possible_cpu(cpu) {
|
|
int mct_irq = mct_irqs[MCT_L0_IRQ + cpu];
|
|
struct mct_clock_event_device *pcpu_mevt =
|
|
per_cpu_ptr(&percpu_mct_tick, cpu);
|
|
|
|
pcpu_mevt->evt.irq = -1;
|
|
|
|
irq_set_status_flags(mct_irq, IRQ_NOAUTOEN);
|
|
if (request_irq(mct_irq,
|
|
exynos4_mct_tick_isr,
|
|
IRQF_TIMER | IRQF_NOBALANCING,
|
|
pcpu_mevt->name, pcpu_mevt)) {
|
|
pr_err("exynos-mct: cannot register IRQ (cpu%d)\n",
|
|
cpu);
|
|
|
|
continue;
|
|
}
|
|
pcpu_mevt->evt.irq = mct_irq;
|
|
}
|
|
}
|
|
|
|
/* Install hotplug callbacks which configure the timer on this CPU */
|
|
err = cpuhp_setup_state(CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
|
|
"clockevents/exynos4/mct_timer:starting",
|
|
exynos4_mct_starting_cpu,
|
|
exynos4_mct_dying_cpu);
|
|
if (err)
|
|
goto out_irq;
|
|
|
|
return 0;
|
|
|
|
out_irq:
|
|
free_percpu_irq(mct_irqs[MCT_L0_IRQ], &percpu_mct_tick);
|
|
return err;
|
|
}
|
|
|
|
static int __init mct_init_dt(struct device_node *np, unsigned int int_type)
|
|
{
|
|
u32 nr_irqs, i;
|
|
int ret;
|
|
|
|
mct_int_type = int_type;
|
|
|
|
/* This driver uses only one global timer interrupt */
|
|
mct_irqs[MCT_G0_IRQ] = irq_of_parse_and_map(np, MCT_G0_IRQ);
|
|
|
|
/*
|
|
* Find out the number of local irqs specified. The local
|
|
* timer irqs are specified after the four global timer
|
|
* irqs are specified.
|
|
*/
|
|
#ifdef CONFIG_OF
|
|
nr_irqs = of_irq_count(np);
|
|
#else
|
|
nr_irqs = 0;
|
|
#endif
|
|
for (i = MCT_L0_IRQ; i < nr_irqs; i++)
|
|
mct_irqs[i] = irq_of_parse_and_map(np, i);
|
|
|
|
ret = exynos4_timer_resources(np, of_iomap(np, 0));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = exynos4_clocksource_init();
|
|
if (ret)
|
|
return ret;
|
|
|
|
return exynos4_clockevent_init();
|
|
}
|
|
|
|
|
|
static int __init mct_init_spi(struct device_node *np)
|
|
{
|
|
return mct_init_dt(np, MCT_INT_SPI);
|
|
}
|
|
|
|
static int __init mct_init_ppi(struct device_node *np)
|
|
{
|
|
return mct_init_dt(np, MCT_INT_PPI);
|
|
}
|
|
TIMER_OF_DECLARE(exynos4210, "samsung,exynos4210-mct", mct_init_spi);
|
|
TIMER_OF_DECLARE(exynos4412, "samsung,exynos4412-mct", mct_init_ppi);
|