454 строки
16 KiB
C
454 строки
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2011-2017, The Linux Foundation
|
|
*/
|
|
|
|
#ifndef _DRIVERS_SLIMBUS_H
|
|
#define _DRIVERS_SLIMBUS_H
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/slimbus.h>
|
|
|
|
/* Standard values per SLIMbus spec needed by controllers and devices */
|
|
#define SLIM_CL_PER_SUPERFRAME 6144
|
|
#define SLIM_CL_PER_SUPERFRAME_DIV8 (SLIM_CL_PER_SUPERFRAME >> 3)
|
|
|
|
/* SLIMbus message types. Related to interpretation of message code. */
|
|
#define SLIM_MSG_MT_CORE 0x0
|
|
#define SLIM_MSG_MT_DEST_REFERRED_USER 0x2
|
|
#define SLIM_MSG_MT_SRC_REFERRED_USER 0x6
|
|
|
|
/*
|
|
* SLIM Broadcast header format
|
|
* BYTE 0: MT[7:5] RL[4:0]
|
|
* BYTE 1: RSVD[7] MC[6:0]
|
|
* BYTE 2: RSVD[7:6] DT[5:4] PI[3:0]
|
|
*/
|
|
#define SLIM_MSG_MT_MASK GENMASK(2, 0)
|
|
#define SLIM_MSG_MT_SHIFT 5
|
|
#define SLIM_MSG_RL_MASK GENMASK(4, 0)
|
|
#define SLIM_MSG_RL_SHIFT 0
|
|
#define SLIM_MSG_MC_MASK GENMASK(6, 0)
|
|
#define SLIM_MSG_MC_SHIFT 0
|
|
#define SLIM_MSG_DT_MASK GENMASK(1, 0)
|
|
#define SLIM_MSG_DT_SHIFT 4
|
|
|
|
#define SLIM_HEADER_GET_MT(b) ((b >> SLIM_MSG_MT_SHIFT) & SLIM_MSG_MT_MASK)
|
|
#define SLIM_HEADER_GET_RL(b) ((b >> SLIM_MSG_RL_SHIFT) & SLIM_MSG_RL_MASK)
|
|
#define SLIM_HEADER_GET_MC(b) ((b >> SLIM_MSG_MC_SHIFT) & SLIM_MSG_MC_MASK)
|
|
#define SLIM_HEADER_GET_DT(b) ((b >> SLIM_MSG_DT_SHIFT) & SLIM_MSG_DT_MASK)
|
|
|
|
/* Device management messages used by this framework */
|
|
#define SLIM_MSG_MC_REPORT_PRESENT 0x1
|
|
#define SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS 0x2
|
|
#define SLIM_MSG_MC_REPORT_ABSENT 0xF
|
|
|
|
/* Data channel management messages */
|
|
#define SLIM_MSG_MC_CONNECT_SOURCE 0x10
|
|
#define SLIM_MSG_MC_CONNECT_SINK 0x11
|
|
#define SLIM_MSG_MC_DISCONNECT_PORT 0x14
|
|
#define SLIM_MSG_MC_CHANGE_CONTENT 0x18
|
|
|
|
/* Clock pause Reconfiguration messages */
|
|
#define SLIM_MSG_MC_BEGIN_RECONFIGURATION 0x40
|
|
#define SLIM_MSG_MC_NEXT_PAUSE_CLOCK 0x4A
|
|
#define SLIM_MSG_MC_NEXT_DEFINE_CHANNEL 0x50
|
|
#define SLIM_MSG_MC_NEXT_DEFINE_CONTENT 0x51
|
|
#define SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL 0x54
|
|
#define SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL 0x55
|
|
#define SLIM_MSG_MC_NEXT_REMOVE_CHANNEL 0x58
|
|
#define SLIM_MSG_MC_RECONFIGURE_NOW 0x5F
|
|
|
|
/* Clock pause values per SLIMbus spec */
|
|
#define SLIM_CLK_FAST 0
|
|
#define SLIM_CLK_CONST_PHASE 1
|
|
#define SLIM_CLK_UNSPECIFIED 2
|
|
|
|
/* Destination type Values */
|
|
#define SLIM_MSG_DEST_LOGICALADDR 0
|
|
#define SLIM_MSG_DEST_ENUMADDR 1
|
|
#define SLIM_MSG_DEST_BROADCAST 3
|
|
|
|
/* Standard values per SLIMbus spec needed by controllers and devices */
|
|
#define SLIM_MAX_CLK_GEAR 10
|
|
#define SLIM_MIN_CLK_GEAR 1
|
|
#define SLIM_SLOT_LEN_BITS 4
|
|
|
|
/* Indicate that the frequency of the flow and the bus frequency are locked */
|
|
#define SLIM_CHANNEL_CONTENT_FL BIT(7)
|
|
|
|
/* Standard values per SLIMbus spec needed by controllers and devices */
|
|
#define SLIM_CL_PER_SUPERFRAME 6144
|
|
#define SLIM_SLOTS_PER_SUPERFRAME (SLIM_CL_PER_SUPERFRAME >> 2)
|
|
#define SLIM_SL_PER_SUPERFRAME (SLIM_CL_PER_SUPERFRAME >> 2)
|
|
/* Manager's logical address is set to 0xFF per spec */
|
|
#define SLIM_LA_MANAGER 0xFF
|
|
|
|
#define SLIM_MAX_TIDS 256
|
|
/**
|
|
* struct slim_framer - Represents SLIMbus framer.
|
|
* Every controller may have multiple framers. There is 1 active framer device
|
|
* responsible for clocking the bus.
|
|
* Manager is responsible for framer hand-over.
|
|
* @dev: Driver model representation of the device.
|
|
* @e_addr: Enumeration address of the framer.
|
|
* @rootfreq: Root Frequency at which the framer can run. This is maximum
|
|
* frequency ('clock gear 10') at which the bus can operate.
|
|
* @superfreq: Superframes per root frequency. Every frame is 6144 bits.
|
|
*/
|
|
struct slim_framer {
|
|
struct device dev;
|
|
struct slim_eaddr e_addr;
|
|
int rootfreq;
|
|
int superfreq;
|
|
};
|
|
|
|
#define to_slim_framer(d) container_of(d, struct slim_framer, dev)
|
|
|
|
/**
|
|
* struct slim_msg_txn - Message to be sent by the controller.
|
|
* This structure has packet header,
|
|
* payload and buffer to be filled (if any)
|
|
* @rl: Header field. remaining length.
|
|
* @mt: Header field. Message type.
|
|
* @mc: Header field. LSB is message code for type mt.
|
|
* @dt: Header field. Destination type.
|
|
* @ec: Element code. Used for elemental access APIs.
|
|
* @tid: Transaction ID. Used for messages expecting response.
|
|
* (relevant for message-codes involving read operation)
|
|
* @la: Logical address of the device this message is going to.
|
|
* (Not used when destination type is broadcast.)
|
|
* @msg: Elemental access message to be read/written
|
|
* @comp: completion if read/write is synchronous, used internally
|
|
* for tid based transactions.
|
|
*/
|
|
struct slim_msg_txn {
|
|
u8 rl;
|
|
u8 mt;
|
|
u8 mc;
|
|
u8 dt;
|
|
u16 ec;
|
|
u8 tid;
|
|
u8 la;
|
|
struct slim_val_inf *msg;
|
|
struct completion *comp;
|
|
};
|
|
|
|
/* Frequently used message transaction structures */
|
|
#define DEFINE_SLIM_LDEST_TXN(name, mc, rl, la, msg) \
|
|
struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_LOGICALADDR, 0,\
|
|
0, la, msg, }
|
|
|
|
#define DEFINE_SLIM_BCAST_TXN(name, mc, rl, la, msg) \
|
|
struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_BROADCAST, 0,\
|
|
0, la, msg, }
|
|
|
|
#define DEFINE_SLIM_EDEST_TXN(name, mc, rl, la, msg) \
|
|
struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_ENUMADDR, 0,\
|
|
0, la, msg, }
|
|
/**
|
|
* enum slim_clk_state: SLIMbus controller's clock state used internally for
|
|
* maintaining current clock state.
|
|
* @SLIM_CLK_ACTIVE: SLIMbus clock is active
|
|
* @SLIM_CLK_ENTERING_PAUSE: SLIMbus clock pause sequence is being sent on the
|
|
* bus. If this succeeds, state changes to SLIM_CLK_PAUSED. If the
|
|
* transition fails, state changes back to SLIM_CLK_ACTIVE
|
|
* @SLIM_CLK_PAUSED: SLIMbus controller clock has paused.
|
|
*/
|
|
enum slim_clk_state {
|
|
SLIM_CLK_ACTIVE,
|
|
SLIM_CLK_ENTERING_PAUSE,
|
|
SLIM_CLK_PAUSED,
|
|
};
|
|
|
|
/**
|
|
* struct slim_sched: Framework uses this structure internally for scheduling.
|
|
* @clk_state: Controller's clock state from enum slim_clk_state
|
|
* @pause_comp: Signals completion of clock pause sequence. This is useful when
|
|
* client tries to call SLIMbus transaction when controller is entering
|
|
* clock pause.
|
|
* @m_reconf: This mutex is held until current reconfiguration (data channel
|
|
* scheduling, message bandwidth reservation) is done. Message APIs can
|
|
* use the bus concurrently when this mutex is held since elemental access
|
|
* messages can be sent on the bus when reconfiguration is in progress.
|
|
*/
|
|
struct slim_sched {
|
|
enum slim_clk_state clk_state;
|
|
struct completion pause_comp;
|
|
struct mutex m_reconf;
|
|
};
|
|
|
|
/**
|
|
* enum slim_port_direction: SLIMbus port direction
|
|
*
|
|
* @SLIM_PORT_SINK: SLIMbus port is a sink
|
|
* @SLIM_PORT_SOURCE: SLIMbus port is a source
|
|
*/
|
|
enum slim_port_direction {
|
|
SLIM_PORT_SINK = 0,
|
|
SLIM_PORT_SOURCE,
|
|
};
|
|
/**
|
|
* enum slim_port_state: SLIMbus Port/Endpoint state machine
|
|
* according to SLIMbus Spec 2.0
|
|
* @SLIM_PORT_DISCONNECTED: SLIMbus port is disconnected
|
|
* entered from Unconfigure/configured state after
|
|
* DISCONNECT_PORT or REMOVE_CHANNEL core command
|
|
* @SLIM_PORT_UNCONFIGURED: SLIMbus port is in unconfigured state.
|
|
* entered from disconnect state after CONNECT_SOURCE/SINK core command
|
|
* @SLIM_PORT_CONFIGURED: SLIMbus port is in configured state.
|
|
* entered from unconfigured state after DEFINE_CHANNEL, DEFINE_CONTENT
|
|
* and ACTIVATE_CHANNEL core commands. Ready for data transmission.
|
|
*/
|
|
enum slim_port_state {
|
|
SLIM_PORT_DISCONNECTED = 0,
|
|
SLIM_PORT_UNCONFIGURED,
|
|
SLIM_PORT_CONFIGURED,
|
|
};
|
|
|
|
/**
|
|
* enum slim_channel_state: SLIMbus channel state machine used by core.
|
|
* @SLIM_CH_STATE_DISCONNECTED: SLIMbus channel is disconnected
|
|
* @SLIM_CH_STATE_ALLOCATED: SLIMbus channel is allocated
|
|
* @SLIM_CH_STATE_ASSOCIATED: SLIMbus channel is associated with port
|
|
* @SLIM_CH_STATE_DEFINED: SLIMbus channel parameters are defined
|
|
* @SLIM_CH_STATE_CONTENT_DEFINED: SLIMbus channel content is defined
|
|
* @SLIM_CH_STATE_ACTIVE: SLIMbus channel is active and ready for data
|
|
* @SLIM_CH_STATE_REMOVED: SLIMbus channel is inactive and removed
|
|
*/
|
|
enum slim_channel_state {
|
|
SLIM_CH_STATE_DISCONNECTED = 0,
|
|
SLIM_CH_STATE_ALLOCATED,
|
|
SLIM_CH_STATE_ASSOCIATED,
|
|
SLIM_CH_STATE_DEFINED,
|
|
SLIM_CH_STATE_CONTENT_DEFINED,
|
|
SLIM_CH_STATE_ACTIVE,
|
|
SLIM_CH_STATE_REMOVED,
|
|
};
|
|
|
|
/**
|
|
* enum slim_ch_data_fmt: SLIMbus channel data Type identifiers according to
|
|
* Table 60 of SLIMbus Spec 1.01.01
|
|
* @SLIM_CH_DATA_FMT_NOT_DEFINED: Undefined
|
|
* @SLIM_CH_DATA_FMT_LPCM_AUDIO: LPCM audio
|
|
* @SLIM_CH_DATA_FMT_IEC61937_COMP_AUDIO: IEC61937 Compressed audio
|
|
* @SLIM_CH_DATA_FMT_PACKED_PDM_AUDIO: Packed PDM audio
|
|
*/
|
|
enum slim_ch_data_fmt {
|
|
SLIM_CH_DATA_FMT_NOT_DEFINED = 0,
|
|
SLIM_CH_DATA_FMT_LPCM_AUDIO = 1,
|
|
SLIM_CH_DATA_FMT_IEC61937_COMP_AUDIO = 2,
|
|
SLIM_CH_DATA_FMT_PACKED_PDM_AUDIO = 3,
|
|
};
|
|
|
|
/**
|
|
* enum slim_ch_aux_fmt: SLIMbus channel Aux Field format IDs according to
|
|
* Table 63 of SLIMbus Spec 2.0
|
|
* @SLIM_CH_AUX_FMT_NOT_APPLICABLE: Undefined
|
|
* @SLIM_CH_AUX_FMT_ZCUV_TUNNEL_IEC60958: ZCUV for tunneling IEC60958
|
|
* @SLIM_CH_AUX_FMT_USER_DEFINED: User defined
|
|
*/
|
|
enum slim_ch_aux_bit_fmt {
|
|
SLIM_CH_AUX_FMT_NOT_APPLICABLE = 0,
|
|
SLIM_CH_AUX_FMT_ZCUV_TUNNEL_IEC60958 = 1,
|
|
SLIM_CH_AUX_FMT_USER_DEFINED = 0xF,
|
|
};
|
|
|
|
/**
|
|
* struct slim_channel - SLIMbus channel, used for state machine
|
|
*
|
|
* @id: ID of channel
|
|
* @prrate: Presense rate of channel from Table 66 of SLIMbus 2.0 Specs
|
|
* @seg_dist: segment distribution code from Table 20 of SLIMbus 2.0 Specs
|
|
* @data_fmt: Data format of channel.
|
|
* @aux_fmt: Aux format for this channel.
|
|
* @state: channel state machine
|
|
*/
|
|
struct slim_channel {
|
|
int id;
|
|
int prrate;
|
|
int seg_dist;
|
|
enum slim_ch_data_fmt data_fmt;
|
|
enum slim_ch_aux_bit_fmt aux_fmt;
|
|
enum slim_channel_state state;
|
|
};
|
|
|
|
/**
|
|
* struct slim_port - SLIMbus port
|
|
*
|
|
* @id: Port id
|
|
* @direction: Port direction, Source or Sink.
|
|
* @state: state machine of port.
|
|
* @ch: channel associated with this port.
|
|
*/
|
|
struct slim_port {
|
|
int id;
|
|
enum slim_port_direction direction;
|
|
enum slim_port_state state;
|
|
struct slim_channel ch;
|
|
};
|
|
|
|
/**
|
|
* enum slim_transport_protocol: SLIMbus Transport protocol list from
|
|
* Table 47 of SLIMbus 2.0 specs.
|
|
* @SLIM_PROTO_ISO: Isochronous Protocol, no flow control as data rate match
|
|
* channel rate flow control embedded in the data.
|
|
* @SLIM_PROTO_PUSH: Pushed Protocol, includes flow control, Used to carry
|
|
* data whose rate is equal to, or lower than the channel rate.
|
|
* @SLIM_PROTO_PULL: Pulled Protocol, similar usage as pushed protocol
|
|
* but pull is a unicast.
|
|
* @SLIM_PROTO_LOCKED: Locked Protocol
|
|
* @SLIM_PROTO_ASYNC_SMPLX: Asynchronous Protocol-Simplex
|
|
* @SLIM_PROTO_ASYNC_HALF_DUP: Asynchronous Protocol-Half-duplex
|
|
* @SLIM_PROTO_EXT_SMPLX: Extended Asynchronous Protocol-Simplex
|
|
* @SLIM_PROTO_EXT_HALF_DUP: Extended Asynchronous Protocol-Half-duplex
|
|
*/
|
|
enum slim_transport_protocol {
|
|
SLIM_PROTO_ISO = 0,
|
|
SLIM_PROTO_PUSH,
|
|
SLIM_PROTO_PULL,
|
|
SLIM_PROTO_LOCKED,
|
|
SLIM_PROTO_ASYNC_SMPLX,
|
|
SLIM_PROTO_ASYNC_HALF_DUP,
|
|
SLIM_PROTO_EXT_SMPLX,
|
|
SLIM_PROTO_EXT_HALF_DUP,
|
|
};
|
|
|
|
/**
|
|
* struct slim_stream_runtime - SLIMbus stream runtime instance
|
|
*
|
|
* @name: Name of the stream
|
|
* @dev: SLIM Device instance associated with this stream
|
|
* @direction: direction of stream
|
|
* @prot: Transport protocol used in this stream
|
|
* @rate: Data rate of samples *
|
|
* @bps: bits per sample
|
|
* @ratem: rate multipler which is super frame rate/data rate
|
|
* @num_ports: number of ports
|
|
* @ports: pointer to instance of ports
|
|
* @node: list head for stream associated with slim device.
|
|
*/
|
|
struct slim_stream_runtime {
|
|
const char *name;
|
|
struct slim_device *dev;
|
|
int direction;
|
|
enum slim_transport_protocol prot;
|
|
unsigned int rate;
|
|
unsigned int bps;
|
|
unsigned int ratem;
|
|
int num_ports;
|
|
struct slim_port *ports;
|
|
struct list_head node;
|
|
};
|
|
|
|
/**
|
|
* struct slim_controller - Controls every instance of SLIMbus
|
|
* (similar to 'master' on SPI)
|
|
* @dev: Device interface to this driver
|
|
* @id: Board-specific number identifier for this controller/bus
|
|
* @name: Name for this controller
|
|
* @min_cg: Minimum clock gear supported by this controller (default value: 1)
|
|
* @max_cg: Maximum clock gear supported by this controller (default value: 10)
|
|
* @clkgear: Current clock gear in which this bus is running
|
|
* @laddr_ida: logical address id allocator
|
|
* @a_framer: Active framer which is clocking the bus managed by this controller
|
|
* @lock: Mutex protecting controller data structures
|
|
* @devices: Slim device list
|
|
* @tid_idr: tid id allocator
|
|
* @txn_lock: Lock to protect table of transactions
|
|
* @sched: scheduler structure used by the controller
|
|
* @xfer_msg: Transfer a message on this controller (this can be a broadcast
|
|
* control/status message like data channel setup, or a unicast message
|
|
* like value element read/write.
|
|
* @set_laddr: Setup logical address at laddr for the slave with elemental
|
|
* address e_addr. Drivers implementing controller will be expected to
|
|
* send unicast message to this device with its logical address.
|
|
* @get_laddr: It is possible that controller needs to set fixed logical
|
|
* address table and get_laddr can be used in that case so that controller
|
|
* can do this assignment. Use case is when the master is on the remote
|
|
* processor side, who is resposible for allocating laddr.
|
|
* @wakeup: This function pointer implements controller-specific procedure
|
|
* to wake it up from clock-pause. Framework will call this to bring
|
|
* the controller out of clock pause.
|
|
* @enable_stream: This function pointer implements controller-specific procedure
|
|
* to enable a stream.
|
|
* @disable_stream: This function pointer implements controller-specific procedure
|
|
* to disable stream.
|
|
*
|
|
* 'Manager device' is responsible for device management, bandwidth
|
|
* allocation, channel setup, and port associations per channel.
|
|
* Device management means Logical address assignment/removal based on
|
|
* enumeration (report-present, report-absent) of a device.
|
|
* Bandwidth allocation is done dynamically by the manager based on active
|
|
* channels on the bus, message-bandwidth requests made by SLIMbus devices.
|
|
* Based on current bandwidth usage, manager chooses a frequency to run
|
|
* the bus at (in steps of 'clock-gear', 1 through 10, each clock gear
|
|
* representing twice the frequency than the previous gear).
|
|
* Manager is also responsible for entering (and exiting) low-power-mode
|
|
* (known as 'clock pause').
|
|
* Manager can do handover of framer if there are multiple framers on the
|
|
* bus and a certain usecase warrants using certain framer to avoid keeping
|
|
* previous framer being powered-on.
|
|
*
|
|
* Controller here performs duties of the manager device, and 'interface
|
|
* device'. Interface device is responsible for monitoring the bus and
|
|
* reporting information such as loss-of-synchronization, data
|
|
* slot-collision.
|
|
*/
|
|
struct slim_controller {
|
|
struct device *dev;
|
|
unsigned int id;
|
|
char name[SLIMBUS_NAME_SIZE];
|
|
int min_cg;
|
|
int max_cg;
|
|
int clkgear;
|
|
struct ida laddr_ida;
|
|
struct slim_framer *a_framer;
|
|
struct mutex lock;
|
|
struct list_head devices;
|
|
struct idr tid_idr;
|
|
spinlock_t txn_lock;
|
|
struct slim_sched sched;
|
|
int (*xfer_msg)(struct slim_controller *ctrl,
|
|
struct slim_msg_txn *tx);
|
|
int (*set_laddr)(struct slim_controller *ctrl,
|
|
struct slim_eaddr *ea, u8 laddr);
|
|
int (*get_laddr)(struct slim_controller *ctrl,
|
|
struct slim_eaddr *ea, u8 *laddr);
|
|
int (*enable_stream)(struct slim_stream_runtime *rt);
|
|
int (*disable_stream)(struct slim_stream_runtime *rt);
|
|
int (*wakeup)(struct slim_controller *ctrl);
|
|
};
|
|
|
|
int slim_device_report_present(struct slim_controller *ctrl,
|
|
struct slim_eaddr *e_addr, u8 *laddr);
|
|
void slim_report_absent(struct slim_device *sbdev);
|
|
int slim_register_controller(struct slim_controller *ctrl);
|
|
int slim_unregister_controller(struct slim_controller *ctrl);
|
|
void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 l);
|
|
int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn);
|
|
int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart);
|
|
int slim_alloc_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn);
|
|
void slim_free_txn_tid(struct slim_controller *ctrl, struct slim_msg_txn *txn);
|
|
|
|
static inline bool slim_tid_txn(u8 mt, u8 mc)
|
|
{
|
|
return (mt == SLIM_MSG_MT_CORE &&
|
|
(mc == SLIM_MSG_MC_REQUEST_INFORMATION ||
|
|
mc == SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION ||
|
|
mc == SLIM_MSG_MC_REQUEST_VALUE ||
|
|
mc == SLIM_MSG_MC_REQUEST_CHANGE_VALUE));
|
|
}
|
|
|
|
static inline bool slim_ec_txn(u8 mt, u8 mc)
|
|
{
|
|
return (mt == SLIM_MSG_MT_CORE &&
|
|
((mc >= SLIM_MSG_MC_REQUEST_INFORMATION &&
|
|
mc <= SLIM_MSG_MC_REPORT_INFORMATION) ||
|
|
(mc >= SLIM_MSG_MC_REQUEST_VALUE &&
|
|
mc <= SLIM_MSG_MC_CHANGE_VALUE)));
|
|
}
|
|
#endif /* _LINUX_SLIMBUS_H */
|