WSL2-Linux-Kernel/drivers/reset/reset-brcmstb.c

133 строки
3.5 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Broadcom STB generic reset controller for SW_INIT style reset controller
*
* Author: Florian Fainelli <f.fainelli@gmail.com>
* Copyright (C) 2018 Broadcom
*/
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/types.h>
struct brcmstb_reset {
void __iomem *base;
struct reset_controller_dev rcdev;
};
#define SW_INIT_SET 0x00
#define SW_INIT_CLEAR 0x04
#define SW_INIT_STATUS 0x08
#define SW_INIT_BIT(id) BIT((id) & 0x1f)
#define SW_INIT_BANK(id) ((id) >> 5)
/* A full bank contains extra registers that we are not utilizing but still
* qualify as a single bank.
*/
#define SW_INIT_BANK_SIZE 0x18
static inline
struct brcmstb_reset *to_brcmstb(struct reset_controller_dev *rcdev)
{
return container_of(rcdev, struct brcmstb_reset, rcdev);
}
static int brcmstb_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE;
struct brcmstb_reset *priv = to_brcmstb(rcdev);
writel_relaxed(SW_INIT_BIT(id), priv->base + off + SW_INIT_SET);
return 0;
}
static int brcmstb_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE;
struct brcmstb_reset *priv = to_brcmstb(rcdev);
writel_relaxed(SW_INIT_BIT(id), priv->base + off + SW_INIT_CLEAR);
/* Maximum reset delay after de-asserting a line and seeing block
* operation is typically 14us for the worst case, build some slack
* here.
*/
usleep_range(100, 200);
return 0;
}
static int brcmstb_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE;
struct brcmstb_reset *priv = to_brcmstb(rcdev);
return readl_relaxed(priv->base + off + SW_INIT_STATUS) &
SW_INIT_BIT(id);
}
static const struct reset_control_ops brcmstb_reset_ops = {
.assert = brcmstb_reset_assert,
.deassert = brcmstb_reset_deassert,
.status = brcmstb_reset_status,
};
static int brcmstb_reset_probe(struct platform_device *pdev)
{
struct device *kdev = &pdev->dev;
struct brcmstb_reset *priv;
struct resource *res;
priv = devm_kzalloc(kdev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!IS_ALIGNED(res->start, SW_INIT_BANK_SIZE) ||
!IS_ALIGNED(resource_size(res), SW_INIT_BANK_SIZE)) {
dev_err(kdev, "incorrect register range\n");
return -EINVAL;
}
priv->base = devm_ioremap_resource(kdev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
dev_set_drvdata(kdev, priv);
priv->rcdev.owner = THIS_MODULE;
priv->rcdev.nr_resets = DIV_ROUND_DOWN_ULL(resource_size(res),
SW_INIT_BANK_SIZE) * 32;
priv->rcdev.ops = &brcmstb_reset_ops;
priv->rcdev.of_node = kdev->of_node;
/* Use defaults: 1 cell and simple xlate function */
return devm_reset_controller_register(kdev, &priv->rcdev);
}
static const struct of_device_id brcmstb_reset_of_match[] = {
{ .compatible = "brcm,brcmstb-reset" },
{ /* sentinel */ }
};
static struct platform_driver brcmstb_reset_driver = {
.probe = brcmstb_reset_probe,
.driver = {
.name = "brcmstb-reset",
.of_match_table = brcmstb_reset_of_match,
},
};
module_platform_driver(brcmstb_reset_driver);
MODULE_AUTHOR("Broadcom");
MODULE_DESCRIPTION("Broadcom STB reset controller");
MODULE_LICENSE("GPL");