487 строки
12 KiB
C
487 строки
12 KiB
C
/*
|
|
* Nano River Technologies viperboard GPIO lib driver
|
|
*
|
|
* (C) 2012 by Lemonage GmbH
|
|
* Author: Lars Poeschel <poeschel@lemonage.de>
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/usb.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <linux/mfd/viperboard.h>
|
|
|
|
#define VPRBRD_GPIOA_CLK_1MHZ 0
|
|
#define VPRBRD_GPIOA_CLK_100KHZ 1
|
|
#define VPRBRD_GPIOA_CLK_10KHZ 2
|
|
#define VPRBRD_GPIOA_CLK_1KHZ 3
|
|
#define VPRBRD_GPIOA_CLK_100HZ 4
|
|
#define VPRBRD_GPIOA_CLK_10HZ 5
|
|
|
|
#define VPRBRD_GPIOA_FREQ_DEFAULT 1000
|
|
|
|
#define VPRBRD_GPIOA_CMD_CONT 0x00
|
|
#define VPRBRD_GPIOA_CMD_PULSE 0x01
|
|
#define VPRBRD_GPIOA_CMD_PWM 0x02
|
|
#define VPRBRD_GPIOA_CMD_SETOUT 0x03
|
|
#define VPRBRD_GPIOA_CMD_SETIN 0x04
|
|
#define VPRBRD_GPIOA_CMD_SETINT 0x05
|
|
#define VPRBRD_GPIOA_CMD_GETIN 0x06
|
|
|
|
#define VPRBRD_GPIOB_CMD_SETDIR 0x00
|
|
#define VPRBRD_GPIOB_CMD_SETVAL 0x01
|
|
|
|
struct vprbrd_gpioa_msg {
|
|
u8 cmd;
|
|
u8 clk;
|
|
u8 offset;
|
|
u8 t1;
|
|
u8 t2;
|
|
u8 invert;
|
|
u8 pwmlevel;
|
|
u8 outval;
|
|
u8 risefall;
|
|
u8 answer;
|
|
u8 __fill;
|
|
} __packed;
|
|
|
|
struct vprbrd_gpiob_msg {
|
|
u8 cmd;
|
|
u16 val;
|
|
u16 mask;
|
|
} __packed;
|
|
|
|
struct vprbrd_gpio {
|
|
struct gpio_chip gpioa; /* gpio a related things */
|
|
u32 gpioa_out;
|
|
u32 gpioa_val;
|
|
struct gpio_chip gpiob; /* gpio b related things */
|
|
u32 gpiob_out;
|
|
u32 gpiob_val;
|
|
struct vprbrd *vb;
|
|
};
|
|
|
|
/* gpioa sampling clock module parameter */
|
|
static unsigned char gpioa_clk;
|
|
static unsigned int gpioa_freq = VPRBRD_GPIOA_FREQ_DEFAULT;
|
|
module_param(gpioa_freq, uint, 0);
|
|
MODULE_PARM_DESC(gpioa_freq,
|
|
"gpio-a sampling freq in Hz (default is 1000Hz) valid values: 10, 100, 1000, 10000, 100000, 1000000");
|
|
|
|
/* ----- begin of gipo a chip -------------------------------------------- */
|
|
|
|
static int vprbrd_gpioa_get(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
int ret, answer, error = 0;
|
|
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
|
|
struct vprbrd *vb = gpio->vb;
|
|
struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf;
|
|
|
|
/* if io is set to output, just return the saved value */
|
|
if (gpio->gpioa_out & (1 << offset))
|
|
return !!(gpio->gpioa_val & (1 << offset));
|
|
|
|
mutex_lock(&vb->lock);
|
|
|
|
gamsg->cmd = VPRBRD_GPIOA_CMD_GETIN;
|
|
gamsg->clk = 0x00;
|
|
gamsg->offset = offset;
|
|
gamsg->t1 = 0x00;
|
|
gamsg->t2 = 0x00;
|
|
gamsg->invert = 0x00;
|
|
gamsg->pwmlevel = 0x00;
|
|
gamsg->outval = 0x00;
|
|
gamsg->risefall = 0x00;
|
|
gamsg->answer = 0x00;
|
|
gamsg->__fill = 0x00;
|
|
|
|
ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0),
|
|
VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, 0x0000,
|
|
0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg),
|
|
VPRBRD_USB_TIMEOUT_MS);
|
|
if (ret != sizeof(struct vprbrd_gpioa_msg))
|
|
error = -EREMOTEIO;
|
|
|
|
ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0),
|
|
VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_IN, 0x0000,
|
|
0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg),
|
|
VPRBRD_USB_TIMEOUT_MS);
|
|
answer = gamsg->answer & 0x01;
|
|
|
|
mutex_unlock(&vb->lock);
|
|
|
|
if (ret != sizeof(struct vprbrd_gpioa_msg))
|
|
error = -EREMOTEIO;
|
|
|
|
if (error)
|
|
return error;
|
|
|
|
return answer;
|
|
}
|
|
|
|
static void vprbrd_gpioa_set(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
int ret;
|
|
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
|
|
struct vprbrd *vb = gpio->vb;
|
|
struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf;
|
|
|
|
if (gpio->gpioa_out & (1 << offset)) {
|
|
if (value)
|
|
gpio->gpioa_val |= (1 << offset);
|
|
else
|
|
gpio->gpioa_val &= ~(1 << offset);
|
|
|
|
mutex_lock(&vb->lock);
|
|
|
|
gamsg->cmd = VPRBRD_GPIOA_CMD_SETOUT;
|
|
gamsg->clk = 0x00;
|
|
gamsg->offset = offset;
|
|
gamsg->t1 = 0x00;
|
|
gamsg->t2 = 0x00;
|
|
gamsg->invert = 0x00;
|
|
gamsg->pwmlevel = 0x00;
|
|
gamsg->outval = value;
|
|
gamsg->risefall = 0x00;
|
|
gamsg->answer = 0x00;
|
|
gamsg->__fill = 0x00;
|
|
|
|
ret = usb_control_msg(vb->usb_dev,
|
|
usb_sndctrlpipe(vb->usb_dev, 0),
|
|
VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT,
|
|
0x0000, 0x0000, gamsg,
|
|
sizeof(struct vprbrd_gpioa_msg), VPRBRD_USB_TIMEOUT_MS);
|
|
|
|
mutex_unlock(&vb->lock);
|
|
|
|
if (ret != sizeof(struct vprbrd_gpioa_msg))
|
|
dev_err(chip->parent, "usb error setting pin value\n");
|
|
}
|
|
}
|
|
|
|
static int vprbrd_gpioa_direction_input(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
int ret;
|
|
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
|
|
struct vprbrd *vb = gpio->vb;
|
|
struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf;
|
|
|
|
gpio->gpioa_out &= ~(1 << offset);
|
|
|
|
mutex_lock(&vb->lock);
|
|
|
|
gamsg->cmd = VPRBRD_GPIOA_CMD_SETIN;
|
|
gamsg->clk = gpioa_clk;
|
|
gamsg->offset = offset;
|
|
gamsg->t1 = 0x00;
|
|
gamsg->t2 = 0x00;
|
|
gamsg->invert = 0x00;
|
|
gamsg->pwmlevel = 0x00;
|
|
gamsg->outval = 0x00;
|
|
gamsg->risefall = 0x00;
|
|
gamsg->answer = 0x00;
|
|
gamsg->__fill = 0x00;
|
|
|
|
ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0),
|
|
VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, 0x0000,
|
|
0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg),
|
|
VPRBRD_USB_TIMEOUT_MS);
|
|
|
|
mutex_unlock(&vb->lock);
|
|
|
|
if (ret != sizeof(struct vprbrd_gpioa_msg))
|
|
return -EREMOTEIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vprbrd_gpioa_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
int ret;
|
|
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
|
|
struct vprbrd *vb = gpio->vb;
|
|
struct vprbrd_gpioa_msg *gamsg = (struct vprbrd_gpioa_msg *)vb->buf;
|
|
|
|
gpio->gpioa_out |= (1 << offset);
|
|
if (value)
|
|
gpio->gpioa_val |= (1 << offset);
|
|
else
|
|
gpio->gpioa_val &= ~(1 << offset);
|
|
|
|
mutex_lock(&vb->lock);
|
|
|
|
gamsg->cmd = VPRBRD_GPIOA_CMD_SETOUT;
|
|
gamsg->clk = 0x00;
|
|
gamsg->offset = offset;
|
|
gamsg->t1 = 0x00;
|
|
gamsg->t2 = 0x00;
|
|
gamsg->invert = 0x00;
|
|
gamsg->pwmlevel = 0x00;
|
|
gamsg->outval = value;
|
|
gamsg->risefall = 0x00;
|
|
gamsg->answer = 0x00;
|
|
gamsg->__fill = 0x00;
|
|
|
|
ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0),
|
|
VPRBRD_USB_REQUEST_GPIOA, VPRBRD_USB_TYPE_OUT, 0x0000,
|
|
0x0000, gamsg, sizeof(struct vprbrd_gpioa_msg),
|
|
VPRBRD_USB_TIMEOUT_MS);
|
|
|
|
mutex_unlock(&vb->lock);
|
|
|
|
if (ret != sizeof(struct vprbrd_gpioa_msg))
|
|
return -EREMOTEIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----- end of gpio a chip ---------------------------------------------- */
|
|
|
|
/* ----- begin of gipo b chip -------------------------------------------- */
|
|
|
|
static int vprbrd_gpiob_setdir(struct vprbrd *vb, unsigned offset,
|
|
unsigned dir)
|
|
{
|
|
struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf;
|
|
int ret;
|
|
|
|
gbmsg->cmd = VPRBRD_GPIOB_CMD_SETDIR;
|
|
gbmsg->val = cpu_to_be16(dir << offset);
|
|
gbmsg->mask = cpu_to_be16(0x0001 << offset);
|
|
|
|
ret = usb_control_msg(vb->usb_dev, usb_sndctrlpipe(vb->usb_dev, 0),
|
|
VPRBRD_USB_REQUEST_GPIOB, VPRBRD_USB_TYPE_OUT, 0x0000,
|
|
0x0000, gbmsg, sizeof(struct vprbrd_gpiob_msg),
|
|
VPRBRD_USB_TIMEOUT_MS);
|
|
|
|
if (ret != sizeof(struct vprbrd_gpiob_msg))
|
|
return -EREMOTEIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vprbrd_gpiob_get(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
int ret;
|
|
u16 val;
|
|
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
|
|
struct vprbrd *vb = gpio->vb;
|
|
struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf;
|
|
|
|
/* if io is set to output, just return the saved value */
|
|
if (gpio->gpiob_out & (1 << offset))
|
|
return gpio->gpiob_val & (1 << offset);
|
|
|
|
mutex_lock(&vb->lock);
|
|
|
|
ret = usb_control_msg(vb->usb_dev, usb_rcvctrlpipe(vb->usb_dev, 0),
|
|
VPRBRD_USB_REQUEST_GPIOB, VPRBRD_USB_TYPE_IN, 0x0000,
|
|
0x0000, gbmsg, sizeof(struct vprbrd_gpiob_msg),
|
|
VPRBRD_USB_TIMEOUT_MS);
|
|
val = gbmsg->val;
|
|
|
|
mutex_unlock(&vb->lock);
|
|
|
|
if (ret != sizeof(struct vprbrd_gpiob_msg))
|
|
return ret;
|
|
|
|
/* cache the read values */
|
|
gpio->gpiob_val = be16_to_cpu(val);
|
|
|
|
return (gpio->gpiob_val >> offset) & 0x1;
|
|
}
|
|
|
|
static void vprbrd_gpiob_set(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
int ret;
|
|
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
|
|
struct vprbrd *vb = gpio->vb;
|
|
struct vprbrd_gpiob_msg *gbmsg = (struct vprbrd_gpiob_msg *)vb->buf;
|
|
|
|
if (gpio->gpiob_out & (1 << offset)) {
|
|
if (value)
|
|
gpio->gpiob_val |= (1 << offset);
|
|
else
|
|
gpio->gpiob_val &= ~(1 << offset);
|
|
|
|
mutex_lock(&vb->lock);
|
|
|
|
gbmsg->cmd = VPRBRD_GPIOB_CMD_SETVAL;
|
|
gbmsg->val = cpu_to_be16(value << offset);
|
|
gbmsg->mask = cpu_to_be16(0x0001 << offset);
|
|
|
|
ret = usb_control_msg(vb->usb_dev,
|
|
usb_sndctrlpipe(vb->usb_dev, 0),
|
|
VPRBRD_USB_REQUEST_GPIOB, VPRBRD_USB_TYPE_OUT,
|
|
0x0000, 0x0000, gbmsg,
|
|
sizeof(struct vprbrd_gpiob_msg), VPRBRD_USB_TIMEOUT_MS);
|
|
|
|
mutex_unlock(&vb->lock);
|
|
|
|
if (ret != sizeof(struct vprbrd_gpiob_msg))
|
|
dev_err(chip->parent, "usb error setting pin value\n");
|
|
}
|
|
}
|
|
|
|
static int vprbrd_gpiob_direction_input(struct gpio_chip *chip,
|
|
unsigned offset)
|
|
{
|
|
int ret;
|
|
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
|
|
struct vprbrd *vb = gpio->vb;
|
|
|
|
gpio->gpiob_out &= ~(1 << offset);
|
|
|
|
mutex_lock(&vb->lock);
|
|
|
|
ret = vprbrd_gpiob_setdir(vb, offset, 0);
|
|
|
|
mutex_unlock(&vb->lock);
|
|
|
|
if (ret)
|
|
dev_err(chip->parent, "usb error setting pin to input\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vprbrd_gpiob_direction_output(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
int ret;
|
|
struct vprbrd_gpio *gpio = gpiochip_get_data(chip);
|
|
struct vprbrd *vb = gpio->vb;
|
|
|
|
gpio->gpiob_out |= (1 << offset);
|
|
|
|
mutex_lock(&vb->lock);
|
|
|
|
ret = vprbrd_gpiob_setdir(vb, offset, 1);
|
|
if (ret)
|
|
dev_err(chip->parent, "usb error setting pin to output\n");
|
|
|
|
mutex_unlock(&vb->lock);
|
|
|
|
vprbrd_gpiob_set(chip, offset, value);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* ----- end of gpio b chip ---------------------------------------------- */
|
|
|
|
static int vprbrd_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct vprbrd *vb = dev_get_drvdata(pdev->dev.parent);
|
|
struct vprbrd_gpio *vb_gpio;
|
|
int ret;
|
|
|
|
vb_gpio = devm_kzalloc(&pdev->dev, sizeof(*vb_gpio), GFP_KERNEL);
|
|
if (vb_gpio == NULL)
|
|
return -ENOMEM;
|
|
|
|
vb_gpio->vb = vb;
|
|
/* registering gpio a */
|
|
vb_gpio->gpioa.label = "viperboard gpio a";
|
|
vb_gpio->gpioa.parent = &pdev->dev;
|
|
vb_gpio->gpioa.owner = THIS_MODULE;
|
|
vb_gpio->gpioa.base = -1;
|
|
vb_gpio->gpioa.ngpio = 16;
|
|
vb_gpio->gpioa.can_sleep = true;
|
|
vb_gpio->gpioa.set = vprbrd_gpioa_set;
|
|
vb_gpio->gpioa.get = vprbrd_gpioa_get;
|
|
vb_gpio->gpioa.direction_input = vprbrd_gpioa_direction_input;
|
|
vb_gpio->gpioa.direction_output = vprbrd_gpioa_direction_output;
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &vb_gpio->gpioa, vb_gpio);
|
|
if (ret < 0) {
|
|
dev_err(vb_gpio->gpioa.parent, "could not add gpio a");
|
|
return ret;
|
|
}
|
|
|
|
/* registering gpio b */
|
|
vb_gpio->gpiob.label = "viperboard gpio b";
|
|
vb_gpio->gpiob.parent = &pdev->dev;
|
|
vb_gpio->gpiob.owner = THIS_MODULE;
|
|
vb_gpio->gpiob.base = -1;
|
|
vb_gpio->gpiob.ngpio = 16;
|
|
vb_gpio->gpiob.can_sleep = true;
|
|
vb_gpio->gpiob.set = vprbrd_gpiob_set;
|
|
vb_gpio->gpiob.get = vprbrd_gpiob_get;
|
|
vb_gpio->gpiob.direction_input = vprbrd_gpiob_direction_input;
|
|
vb_gpio->gpiob.direction_output = vprbrd_gpiob_direction_output;
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &vb_gpio->gpiob, vb_gpio);
|
|
if (ret < 0) {
|
|
dev_err(vb_gpio->gpiob.parent, "could not add gpio b");
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, vb_gpio);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver vprbrd_gpio_driver = {
|
|
.driver.name = "viperboard-gpio",
|
|
.driver.owner = THIS_MODULE,
|
|
.probe = vprbrd_gpio_probe,
|
|
};
|
|
|
|
static int __init vprbrd_gpio_init(void)
|
|
{
|
|
switch (gpioa_freq) {
|
|
case 1000000:
|
|
gpioa_clk = VPRBRD_GPIOA_CLK_1MHZ;
|
|
break;
|
|
case 100000:
|
|
gpioa_clk = VPRBRD_GPIOA_CLK_100KHZ;
|
|
break;
|
|
case 10000:
|
|
gpioa_clk = VPRBRD_GPIOA_CLK_10KHZ;
|
|
break;
|
|
case 1000:
|
|
gpioa_clk = VPRBRD_GPIOA_CLK_1KHZ;
|
|
break;
|
|
case 100:
|
|
gpioa_clk = VPRBRD_GPIOA_CLK_100HZ;
|
|
break;
|
|
case 10:
|
|
gpioa_clk = VPRBRD_GPIOA_CLK_10HZ;
|
|
break;
|
|
default:
|
|
pr_warn("invalid gpioa_freq (%d)\n", gpioa_freq);
|
|
gpioa_clk = VPRBRD_GPIOA_CLK_1KHZ;
|
|
}
|
|
|
|
return platform_driver_register(&vprbrd_gpio_driver);
|
|
}
|
|
subsys_initcall(vprbrd_gpio_init);
|
|
|
|
static void __exit vprbrd_gpio_exit(void)
|
|
{
|
|
platform_driver_unregister(&vprbrd_gpio_driver);
|
|
}
|
|
module_exit(vprbrd_gpio_exit);
|
|
|
|
MODULE_AUTHOR("Lars Poeschel <poeschel@lemonage.de>");
|
|
MODULE_DESCRIPTION("GPIO driver for Nano River Techs Viperboard");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:viperboard-gpio");
|