WSL2-Linux-Kernel/drivers/net/ethernet/intel/e1000/e1000.h

355 строки
9.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright(c) 1999 - 2006 Intel Corporation. */
/* Linux PRO/1000 Ethernet Driver main header file */
#ifndef _E1000_H_
#define _E1000_H_
#include <linux/stddef.h>
#include <linux/module.h>
#include <linux/types.h>
#include <asm/byteorder.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/pagemap.h>
#include <linux/dma-mapping.h>
#include <linux/bitops.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <linux/capability.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/ipv6.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <net/pkt_sched.h>
#include <linux/list.h>
#include <linux/reboot.h>
#include <net/checksum.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#define BAR_0 0
#define BAR_1 1
#define BAR_5 5
#define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
struct e1000_adapter;
#include "e1000_hw.h"
#define E1000_MAX_INTR 10
/*
* Count for polling __E1000_RESET condition every 10-20msec.
*/
#define E1000_CHECK_RESET_COUNT 50
/* TX/RX descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 256
#define E1000_MIN_TXD 48
#define E1000_MAX_82544_TXD 4096
#define E1000_DEFAULT_RXD 256
#define E1000_MAX_RXD 256
#define E1000_MIN_RXD 48
#define E1000_MAX_82544_RXD 4096
#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
/* this is the size past which hardware will drop packets when setting LPE=0 */
#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
/* Supported Rx Buffer Sizes */
#define E1000_RXBUFFER_128 128 /* Used for packet split */
#define E1000_RXBUFFER_256 256 /* Used for packet split */
#define E1000_RXBUFFER_512 512
#define E1000_RXBUFFER_1024 1024
#define E1000_RXBUFFER_2048 2048
#define E1000_RXBUFFER_4096 4096
#define E1000_RXBUFFER_8192 8192
#define E1000_RXBUFFER_16384 16384
/* SmartSpeed delimiters */
#define E1000_SMARTSPEED_DOWNSHIFT 3
#define E1000_SMARTSPEED_MAX 15
/* Packet Buffer allocations */
#define E1000_PBA_BYTES_SHIFT 0xA
#define E1000_TX_HEAD_ADDR_SHIFT 7
#define E1000_PBA_TX_MASK 0xFFFF0000
/* Flow Control Watermarks */
#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */
/* How many Tx Descriptors do we need to call netif_wake_queue ? */
#define E1000_TX_QUEUE_WAKE 16
/* How many Rx Buffers do we bundle into one write to the hardware ? */
#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
#define AUTO_ALL_MODES 0
#define E1000_EEPROM_82544_APM 0x0004
#define E1000_EEPROM_APME 0x0400
#ifndef E1000_MASTER_SLAVE
/* Switch to override PHY master/slave setting */
#define E1000_MASTER_SLAVE e1000_ms_hw_default
#endif
#define E1000_MNG_VLAN_NONE (-1)
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer
*/
struct e1000_tx_buffer {
struct sk_buff *skb;
dma_addr_t dma;
unsigned long time_stamp;
u16 length;
u16 next_to_watch;
bool mapped_as_page;
unsigned short segs;
unsigned int bytecount;
};
struct e1000_rx_buffer {
union {
struct page *page; /* jumbo: alloc_page */
u8 *data; /* else, netdev_alloc_frag */
} rxbuf;
dma_addr_t dma;
};
struct e1000_tx_ring {
/* pointer to the descriptor ring memory */
void *desc;
/* physical address of the descriptor ring */
dma_addr_t dma;
/* length of descriptor ring in bytes */
unsigned int size;
/* number of descriptors in the ring */
unsigned int count;
/* next descriptor to associate a buffer with */
unsigned int next_to_use;
/* next descriptor to check for DD status bit */
unsigned int next_to_clean;
/* array of buffer information structs */
struct e1000_tx_buffer *buffer_info;
u16 tdh;
u16 tdt;
bool last_tx_tso;
};
struct e1000_rx_ring {
/* pointer to the descriptor ring memory */
void *desc;
/* physical address of the descriptor ring */
dma_addr_t dma;
/* length of descriptor ring in bytes */
unsigned int size;
/* number of descriptors in the ring */
unsigned int count;
/* next descriptor to associate a buffer with */
unsigned int next_to_use;
/* next descriptor to check for DD status bit */
unsigned int next_to_clean;
/* array of buffer information structs */
struct e1000_rx_buffer *buffer_info;
struct sk_buff *rx_skb_top;
/* cpu for rx queue */
int cpu;
u16 rdh;
u16 rdt;
};
#define E1000_DESC_UNUSED(R) \
({ \
unsigned int clean = smp_load_acquire(&(R)->next_to_clean); \
unsigned int use = READ_ONCE((R)->next_to_use); \
(clean > use ? 0 : (R)->count) + clean - use - 1; \
})
#define E1000_RX_DESC_EXT(R, i) \
(&(((union e1000_rx_desc_extended *)((R).desc))[i]))
#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
/* board specific private data structure */
struct e1000_adapter {
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
u16 mng_vlan_id;
u32 bd_number;
u32 rx_buffer_len;
u32 wol;
u32 smartspeed;
u32 en_mng_pt;
u16 link_speed;
u16 link_duplex;
spinlock_t stats_lock;
unsigned int total_tx_bytes;
unsigned int total_tx_packets;
unsigned int total_rx_bytes;
unsigned int total_rx_packets;
/* Interrupt Throttle Rate */
u32 itr;
u32 itr_setting;
u16 tx_itr;
u16 rx_itr;
u8 fc_autoneg;
/* TX */
struct e1000_tx_ring *tx_ring; /* One per active queue */
unsigned int restart_queue;
u32 txd_cmd;
u32 tx_int_delay;
u32 tx_abs_int_delay;
u32 gotcl;
u64 gotcl_old;
u64 tpt_old;
u64 colc_old;
u32 tx_timeout_count;
u32 tx_fifo_head;
u32 tx_head_addr;
u32 tx_fifo_size;
u8 tx_timeout_factor;
atomic_t tx_fifo_stall;
bool pcix_82544;
bool detect_tx_hung;
bool dump_buffers;
/* RX */
bool (*clean_rx)(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int *work_done, int work_to_do);
void (*alloc_rx_buf)(struct e1000_adapter *adapter,
struct e1000_rx_ring *rx_ring,
int cleaned_count);
struct e1000_rx_ring *rx_ring; /* One per active queue */
struct napi_struct napi;
int num_tx_queues;
int num_rx_queues;
u64 hw_csum_err;
u64 hw_csum_good;
u32 alloc_rx_buff_failed;
u32 rx_int_delay;
u32 rx_abs_int_delay;
bool rx_csum;
u32 gorcl;
u64 gorcl_old;
/* OS defined structs */
struct net_device *netdev;
struct pci_dev *pdev;
/* structs defined in e1000_hw.h */
struct e1000_hw hw;
struct e1000_hw_stats stats;
struct e1000_phy_info phy_info;
struct e1000_phy_stats phy_stats;
u32 test_icr;
struct e1000_tx_ring test_tx_ring;
struct e1000_rx_ring test_rx_ring;
int msg_enable;
/* to not mess up cache alignment, always add to the bottom */
bool tso_force;
bool smart_power_down; /* phy smart power down */
bool quad_port_a;
unsigned long flags;
u32 eeprom_wol;
/* for ioport free */
int bars;
int need_ioport;
bool discarding;
struct work_struct reset_task;
struct delayed_work watchdog_task;
struct delayed_work fifo_stall_task;
struct delayed_work phy_info_task;
};
enum e1000_state_t {
__E1000_TESTING,
__E1000_RESETTING,
__E1000_DOWN,
__E1000_DISABLED
};
#undef pr_fmt
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
struct net_device *e1000_get_hw_dev(struct e1000_hw *hw);
#define e_dbg(format, arg...) \
netdev_dbg(e1000_get_hw_dev(hw), format, ## arg)
#define e_err(msglvl, format, arg...) \
netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
#define e_info(msglvl, format, arg...) \
netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
#define e_warn(msglvl, format, arg...) \
netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
#define e_notice(msglvl, format, arg...) \
netif_notice(adapter, msglvl, adapter->netdev, format, ## arg)
#define e_dev_info(format, arg...) \
dev_info(&adapter->pdev->dev, format, ## arg)
#define e_dev_warn(format, arg...) \
dev_warn(&adapter->pdev->dev, format, ## arg)
#define e_dev_err(format, arg...) \
dev_err(&adapter->pdev->dev, format, ## arg)
extern char e1000_driver_name[];
extern const char e1000_driver_version[];
int e1000_open(struct net_device *netdev);
int e1000_close(struct net_device *netdev);
int e1000_up(struct e1000_adapter *adapter);
void e1000_down(struct e1000_adapter *adapter);
void e1000_reinit_locked(struct e1000_adapter *adapter);
void e1000_reset(struct e1000_adapter *adapter);
int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx);
int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
void e1000_update_stats(struct e1000_adapter *adapter);
bool e1000_has_link(struct e1000_adapter *adapter);
void e1000_power_up_phy(struct e1000_adapter *);
void e1000_set_ethtool_ops(struct net_device *netdev);
void e1000_check_options(struct e1000_adapter *adapter);
char *e1000_get_hw_dev_name(struct e1000_hw *hw);
#endif /* _E1000_H_ */