491 строка
12 KiB
C
491 строка
12 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright (c) 2018 Intel Corporation */
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include "igc_hw.h"
|
|
|
|
/**
|
|
* igc_get_hw_semaphore_i225 - Acquire hardware semaphore
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Acquire the necessary semaphores for exclusive access to the EEPROM.
|
|
* Set the EEPROM access request bit and wait for EEPROM access grant bit.
|
|
* Return successful if access grant bit set, else clear the request for
|
|
* EEPROM access and return -IGC_ERR_NVM (-1).
|
|
*/
|
|
static s32 igc_acquire_nvm_i225(struct igc_hw *hw)
|
|
{
|
|
return igc_acquire_swfw_sync_i225(hw, IGC_SWFW_EEP_SM);
|
|
}
|
|
|
|
/**
|
|
* igc_release_nvm_i225 - Release exclusive access to EEPROM
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Stop any current commands to the EEPROM and clear the EEPROM request bit,
|
|
* then release the semaphores acquired.
|
|
*/
|
|
static void igc_release_nvm_i225(struct igc_hw *hw)
|
|
{
|
|
igc_release_swfw_sync_i225(hw, IGC_SWFW_EEP_SM);
|
|
}
|
|
|
|
/**
|
|
* igc_get_hw_semaphore_i225 - Acquire hardware semaphore
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Acquire the HW semaphore to access the PHY or NVM
|
|
*/
|
|
static s32 igc_get_hw_semaphore_i225(struct igc_hw *hw)
|
|
{
|
|
s32 timeout = hw->nvm.word_size + 1;
|
|
s32 i = 0;
|
|
u32 swsm;
|
|
|
|
/* Get the SW semaphore */
|
|
while (i < timeout) {
|
|
swsm = rd32(IGC_SWSM);
|
|
if (!(swsm & IGC_SWSM_SMBI))
|
|
break;
|
|
|
|
usleep_range(500, 600);
|
|
i++;
|
|
}
|
|
|
|
if (i == timeout) {
|
|
/* In rare circumstances, the SW semaphore may already be held
|
|
* unintentionally. Clear the semaphore once before giving up.
|
|
*/
|
|
if (hw->dev_spec._base.clear_semaphore_once) {
|
|
hw->dev_spec._base.clear_semaphore_once = false;
|
|
igc_put_hw_semaphore(hw);
|
|
for (i = 0; i < timeout; i++) {
|
|
swsm = rd32(IGC_SWSM);
|
|
if (!(swsm & IGC_SWSM_SMBI))
|
|
break;
|
|
|
|
usleep_range(500, 600);
|
|
}
|
|
}
|
|
|
|
/* If we do not have the semaphore here, we have to give up. */
|
|
if (i == timeout) {
|
|
hw_dbg("Driver can't access device - SMBI bit is set.\n");
|
|
return -IGC_ERR_NVM;
|
|
}
|
|
}
|
|
|
|
/* Get the FW semaphore. */
|
|
for (i = 0; i < timeout; i++) {
|
|
swsm = rd32(IGC_SWSM);
|
|
wr32(IGC_SWSM, swsm | IGC_SWSM_SWESMBI);
|
|
|
|
/* Semaphore acquired if bit latched */
|
|
if (rd32(IGC_SWSM) & IGC_SWSM_SWESMBI)
|
|
break;
|
|
|
|
usleep_range(500, 600);
|
|
}
|
|
|
|
if (i == timeout) {
|
|
/* Release semaphores */
|
|
igc_put_hw_semaphore(hw);
|
|
hw_dbg("Driver can't access the NVM\n");
|
|
return -IGC_ERR_NVM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* igc_acquire_swfw_sync_i225 - Acquire SW/FW semaphore
|
|
* @hw: pointer to the HW structure
|
|
* @mask: specifies which semaphore to acquire
|
|
*
|
|
* Acquire the SW/FW semaphore to access the PHY or NVM. The mask
|
|
* will also specify which port we're acquiring the lock for.
|
|
*/
|
|
s32 igc_acquire_swfw_sync_i225(struct igc_hw *hw, u16 mask)
|
|
{
|
|
s32 i = 0, timeout = 200;
|
|
u32 fwmask = mask << 16;
|
|
u32 swmask = mask;
|
|
s32 ret_val = 0;
|
|
u32 swfw_sync;
|
|
|
|
while (i < timeout) {
|
|
if (igc_get_hw_semaphore_i225(hw)) {
|
|
ret_val = -IGC_ERR_SWFW_SYNC;
|
|
goto out;
|
|
}
|
|
|
|
swfw_sync = rd32(IGC_SW_FW_SYNC);
|
|
if (!(swfw_sync & (fwmask | swmask)))
|
|
break;
|
|
|
|
/* Firmware currently using resource (fwmask) */
|
|
igc_put_hw_semaphore(hw);
|
|
mdelay(5);
|
|
i++;
|
|
}
|
|
|
|
if (i == timeout) {
|
|
hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
|
|
ret_val = -IGC_ERR_SWFW_SYNC;
|
|
goto out;
|
|
}
|
|
|
|
swfw_sync |= swmask;
|
|
wr32(IGC_SW_FW_SYNC, swfw_sync);
|
|
|
|
igc_put_hw_semaphore(hw);
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_release_swfw_sync_i225 - Release SW/FW semaphore
|
|
* @hw: pointer to the HW structure
|
|
* @mask: specifies which semaphore to acquire
|
|
*
|
|
* Release the SW/FW semaphore used to access the PHY or NVM. The mask
|
|
* will also specify which port we're releasing the lock for.
|
|
*/
|
|
void igc_release_swfw_sync_i225(struct igc_hw *hw, u16 mask)
|
|
{
|
|
u32 swfw_sync;
|
|
|
|
while (igc_get_hw_semaphore_i225(hw))
|
|
; /* Empty */
|
|
|
|
swfw_sync = rd32(IGC_SW_FW_SYNC);
|
|
swfw_sync &= ~mask;
|
|
wr32(IGC_SW_FW_SYNC, swfw_sync);
|
|
|
|
igc_put_hw_semaphore(hw);
|
|
}
|
|
|
|
/**
|
|
* igc_read_nvm_srrd_i225 - Reads Shadow Ram using EERD register
|
|
* @hw: pointer to the HW structure
|
|
* @offset: offset of word in the Shadow Ram to read
|
|
* @words: number of words to read
|
|
* @data: word read from the Shadow Ram
|
|
*
|
|
* Reads a 16 bit word from the Shadow Ram using the EERD register.
|
|
* Uses necessary synchronization semaphores.
|
|
*/
|
|
static s32 igc_read_nvm_srrd_i225(struct igc_hw *hw, u16 offset, u16 words,
|
|
u16 *data)
|
|
{
|
|
s32 status = 0;
|
|
u16 i, count;
|
|
|
|
/* We cannot hold synchronization semaphores for too long,
|
|
* because of forceful takeover procedure. However it is more efficient
|
|
* to read in bursts than synchronizing access for each word.
|
|
*/
|
|
for (i = 0; i < words; i += IGC_EERD_EEWR_MAX_COUNT) {
|
|
count = (words - i) / IGC_EERD_EEWR_MAX_COUNT > 0 ?
|
|
IGC_EERD_EEWR_MAX_COUNT : (words - i);
|
|
|
|
status = hw->nvm.ops.acquire(hw);
|
|
if (status)
|
|
break;
|
|
|
|
status = igc_read_nvm_eerd(hw, offset, count, data + i);
|
|
hw->nvm.ops.release(hw);
|
|
if (status)
|
|
break;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* igc_write_nvm_srwr - Write to Shadow Ram using EEWR
|
|
* @hw: pointer to the HW structure
|
|
* @offset: offset within the Shadow Ram to be written to
|
|
* @words: number of words to write
|
|
* @data: 16 bit word(s) to be written to the Shadow Ram
|
|
*
|
|
* Writes data to Shadow Ram at offset using EEWR register.
|
|
*
|
|
* If igc_update_nvm_checksum is not called after this function , the
|
|
* Shadow Ram will most likely contain an invalid checksum.
|
|
*/
|
|
static s32 igc_write_nvm_srwr(struct igc_hw *hw, u16 offset, u16 words,
|
|
u16 *data)
|
|
{
|
|
struct igc_nvm_info *nvm = &hw->nvm;
|
|
u32 attempts = 100000;
|
|
u32 i, k, eewr = 0;
|
|
s32 ret_val = 0;
|
|
|
|
/* A check for invalid values: offset too large, too many words,
|
|
* too many words for the offset, and not enough words.
|
|
*/
|
|
if (offset >= nvm->word_size || (words > (nvm->word_size - offset)) ||
|
|
words == 0) {
|
|
hw_dbg("nvm parameter(s) out of bounds\n");
|
|
ret_val = -IGC_ERR_NVM;
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < words; i++) {
|
|
eewr = ((offset + i) << IGC_NVM_RW_ADDR_SHIFT) |
|
|
(data[i] << IGC_NVM_RW_REG_DATA) |
|
|
IGC_NVM_RW_REG_START;
|
|
|
|
wr32(IGC_SRWR, eewr);
|
|
|
|
for (k = 0; k < attempts; k++) {
|
|
if (IGC_NVM_RW_REG_DONE &
|
|
rd32(IGC_SRWR)) {
|
|
ret_val = 0;
|
|
break;
|
|
}
|
|
udelay(5);
|
|
}
|
|
|
|
if (ret_val) {
|
|
hw_dbg("Shadow RAM write EEWR timed out\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_write_nvm_srwr_i225 - Write to Shadow RAM using EEWR
|
|
* @hw: pointer to the HW structure
|
|
* @offset: offset within the Shadow RAM to be written to
|
|
* @words: number of words to write
|
|
* @data: 16 bit word(s) to be written to the Shadow RAM
|
|
*
|
|
* Writes data to Shadow RAM at offset using EEWR register.
|
|
*
|
|
* If igc_update_nvm_checksum is not called after this function , the
|
|
* data will not be committed to FLASH and also Shadow RAM will most likely
|
|
* contain an invalid checksum.
|
|
*
|
|
* If error code is returned, data and Shadow RAM may be inconsistent - buffer
|
|
* partially written.
|
|
*/
|
|
static s32 igc_write_nvm_srwr_i225(struct igc_hw *hw, u16 offset, u16 words,
|
|
u16 *data)
|
|
{
|
|
s32 status = 0;
|
|
u16 i, count;
|
|
|
|
/* We cannot hold synchronization semaphores for too long,
|
|
* because of forceful takeover procedure. However it is more efficient
|
|
* to write in bursts than synchronizing access for each word.
|
|
*/
|
|
for (i = 0; i < words; i += IGC_EERD_EEWR_MAX_COUNT) {
|
|
count = (words - i) / IGC_EERD_EEWR_MAX_COUNT > 0 ?
|
|
IGC_EERD_EEWR_MAX_COUNT : (words - i);
|
|
|
|
status = hw->nvm.ops.acquire(hw);
|
|
if (status)
|
|
break;
|
|
|
|
status = igc_write_nvm_srwr(hw, offset, count, data + i);
|
|
hw->nvm.ops.release(hw);
|
|
if (status)
|
|
break;
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* igc_validate_nvm_checksum_i225 - Validate EEPROM checksum
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Calculates the EEPROM checksum by reading/adding each word of the EEPROM
|
|
* and then verifies that the sum of the EEPROM is equal to 0xBABA.
|
|
*/
|
|
static s32 igc_validate_nvm_checksum_i225(struct igc_hw *hw)
|
|
{
|
|
s32 (*read_op_ptr)(struct igc_hw *hw, u16 offset, u16 count,
|
|
u16 *data);
|
|
s32 status = 0;
|
|
|
|
status = hw->nvm.ops.acquire(hw);
|
|
if (status)
|
|
goto out;
|
|
|
|
/* Replace the read function with semaphore grabbing with
|
|
* the one that skips this for a while.
|
|
* We have semaphore taken already here.
|
|
*/
|
|
read_op_ptr = hw->nvm.ops.read;
|
|
hw->nvm.ops.read = igc_read_nvm_eerd;
|
|
|
|
status = igc_validate_nvm_checksum(hw);
|
|
|
|
/* Revert original read operation. */
|
|
hw->nvm.ops.read = read_op_ptr;
|
|
|
|
hw->nvm.ops.release(hw);
|
|
|
|
out:
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* igc_pool_flash_update_done_i225 - Pool FLUDONE status
|
|
* @hw: pointer to the HW structure
|
|
*/
|
|
static s32 igc_pool_flash_update_done_i225(struct igc_hw *hw)
|
|
{
|
|
s32 ret_val = -IGC_ERR_NVM;
|
|
u32 i, reg;
|
|
|
|
for (i = 0; i < IGC_FLUDONE_ATTEMPTS; i++) {
|
|
reg = rd32(IGC_EECD);
|
|
if (reg & IGC_EECD_FLUDONE_I225) {
|
|
ret_val = 0;
|
|
break;
|
|
}
|
|
udelay(5);
|
|
}
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_update_flash_i225 - Commit EEPROM to the flash
|
|
* @hw: pointer to the HW structure
|
|
*/
|
|
static s32 igc_update_flash_i225(struct igc_hw *hw)
|
|
{
|
|
s32 ret_val = 0;
|
|
u32 flup;
|
|
|
|
ret_val = igc_pool_flash_update_done_i225(hw);
|
|
if (ret_val == -IGC_ERR_NVM) {
|
|
hw_dbg("Flash update time out\n");
|
|
goto out;
|
|
}
|
|
|
|
flup = rd32(IGC_EECD) | IGC_EECD_FLUPD_I225;
|
|
wr32(IGC_EECD, flup);
|
|
|
|
ret_val = igc_pool_flash_update_done_i225(hw);
|
|
if (ret_val)
|
|
hw_dbg("Flash update time out\n");
|
|
else
|
|
hw_dbg("Flash update complete\n");
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_update_nvm_checksum_i225 - Update EEPROM checksum
|
|
* @hw: pointer to the HW structure
|
|
*
|
|
* Updates the EEPROM checksum by reading/adding each word of the EEPROM
|
|
* up to the checksum. Then calculates the EEPROM checksum and writes the
|
|
* value to the EEPROM. Next commit EEPROM data onto the Flash.
|
|
*/
|
|
static s32 igc_update_nvm_checksum_i225(struct igc_hw *hw)
|
|
{
|
|
u16 checksum = 0;
|
|
s32 ret_val = 0;
|
|
u16 i, nvm_data;
|
|
|
|
/* Read the first word from the EEPROM. If this times out or fails, do
|
|
* not continue or we could be in for a very long wait while every
|
|
* EEPROM read fails
|
|
*/
|
|
ret_val = igc_read_nvm_eerd(hw, 0, 1, &nvm_data);
|
|
if (ret_val) {
|
|
hw_dbg("EEPROM read failed\n");
|
|
goto out;
|
|
}
|
|
|
|
ret_val = hw->nvm.ops.acquire(hw);
|
|
if (ret_val)
|
|
goto out;
|
|
|
|
/* Do not use hw->nvm.ops.write, hw->nvm.ops.read
|
|
* because we do not want to take the synchronization
|
|
* semaphores twice here.
|
|
*/
|
|
|
|
for (i = 0; i < NVM_CHECKSUM_REG; i++) {
|
|
ret_val = igc_read_nvm_eerd(hw, i, 1, &nvm_data);
|
|
if (ret_val) {
|
|
hw->nvm.ops.release(hw);
|
|
hw_dbg("NVM Read Error while updating checksum.\n");
|
|
goto out;
|
|
}
|
|
checksum += nvm_data;
|
|
}
|
|
checksum = (u16)NVM_SUM - checksum;
|
|
ret_val = igc_write_nvm_srwr(hw, NVM_CHECKSUM_REG, 1,
|
|
&checksum);
|
|
if (ret_val) {
|
|
hw->nvm.ops.release(hw);
|
|
hw_dbg("NVM Write Error while updating checksum.\n");
|
|
goto out;
|
|
}
|
|
|
|
hw->nvm.ops.release(hw);
|
|
|
|
ret_val = igc_update_flash_i225(hw);
|
|
|
|
out:
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_get_flash_presence_i225 - Check if flash device is detected
|
|
* @hw: pointer to the HW structure
|
|
*/
|
|
bool igc_get_flash_presence_i225(struct igc_hw *hw)
|
|
{
|
|
bool ret_val = false;
|
|
u32 eec = 0;
|
|
|
|
eec = rd32(IGC_EECD);
|
|
if (eec & IGC_EECD_FLASH_DETECTED_I225)
|
|
ret_val = true;
|
|
|
|
return ret_val;
|
|
}
|
|
|
|
/**
|
|
* igc_init_nvm_params_i225 - Init NVM func ptrs.
|
|
* @hw: pointer to the HW structure
|
|
*/
|
|
s32 igc_init_nvm_params_i225(struct igc_hw *hw)
|
|
{
|
|
struct igc_nvm_info *nvm = &hw->nvm;
|
|
|
|
nvm->ops.acquire = igc_acquire_nvm_i225;
|
|
nvm->ops.release = igc_release_nvm_i225;
|
|
|
|
/* NVM Function Pointers */
|
|
if (igc_get_flash_presence_i225(hw)) {
|
|
hw->nvm.type = igc_nvm_flash_hw;
|
|
nvm->ops.read = igc_read_nvm_srrd_i225;
|
|
nvm->ops.write = igc_write_nvm_srwr_i225;
|
|
nvm->ops.validate = igc_validate_nvm_checksum_i225;
|
|
nvm->ops.update = igc_update_nvm_checksum_i225;
|
|
} else {
|
|
hw->nvm.type = igc_nvm_invm;
|
|
nvm->ops.read = igc_read_nvm_eerd;
|
|
nvm->ops.write = NULL;
|
|
nvm->ops.validate = NULL;
|
|
nvm->ops.update = NULL;
|
|
}
|
|
return 0;
|
|
}
|