251 строка
6.9 KiB
C
251 строка
6.9 KiB
C
/*
|
|
* Samsung SATA SerDes(PHY) driver
|
|
*
|
|
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
|
|
* Authors: Girish K S <ks.giri@samsung.com>
|
|
* Yuvaraj Kumar C D <yuvaraj.cd@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#define SATAPHY_CONTROL_OFFSET 0x0724
|
|
#define EXYNOS5_SATAPHY_PMU_ENABLE BIT(0)
|
|
#define EXYNOS5_SATA_RESET 0x4
|
|
#define RESET_GLOBAL_RST_N BIT(0)
|
|
#define RESET_CMN_RST_N BIT(1)
|
|
#define RESET_CMN_BLOCK_RST_N BIT(2)
|
|
#define RESET_CMN_I2C_RST_N BIT(3)
|
|
#define RESET_TX_RX_PIPE_RST_N BIT(4)
|
|
#define RESET_TX_RX_BLOCK_RST_N BIT(5)
|
|
#define RESET_TX_RX_I2C_RST_N (BIT(6) | BIT(7))
|
|
#define LINK_RESET 0xf0000
|
|
#define EXYNOS5_SATA_MODE0 0x10
|
|
#define SATA_SPD_GEN3 BIT(1)
|
|
#define EXYNOS5_SATA_CTRL0 0x14
|
|
#define CTRL0_P0_PHY_CALIBRATED_SEL BIT(9)
|
|
#define CTRL0_P0_PHY_CALIBRATED BIT(8)
|
|
#define EXYNOS5_SATA_PHSATA_CTRLM 0xe0
|
|
#define PHCTRLM_REF_RATE BIT(1)
|
|
#define PHCTRLM_HIGH_SPEED BIT(0)
|
|
#define EXYNOS5_SATA_PHSATA_STATM 0xf0
|
|
#define PHSTATM_PLL_LOCKED BIT(0)
|
|
|
|
#define PHY_PLL_TIMEOUT (usecs_to_jiffies(1000))
|
|
|
|
struct exynos_sata_phy {
|
|
struct phy *phy;
|
|
struct clk *phyclk;
|
|
void __iomem *regs;
|
|
struct regmap *pmureg;
|
|
struct i2c_client *client;
|
|
};
|
|
|
|
static int wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit,
|
|
u32 status)
|
|
{
|
|
unsigned long timeout = jiffies + PHY_PLL_TIMEOUT;
|
|
|
|
while (time_before(jiffies, timeout)) {
|
|
if ((readl(base + reg) & checkbit) == status)
|
|
return 0;
|
|
}
|
|
|
|
return -EFAULT;
|
|
}
|
|
|
|
static int exynos_sata_phy_power_on(struct phy *phy)
|
|
{
|
|
struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
|
|
|
|
return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
|
|
EXYNOS5_SATAPHY_PMU_ENABLE, true);
|
|
|
|
}
|
|
|
|
static int exynos_sata_phy_power_off(struct phy *phy)
|
|
{
|
|
struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
|
|
|
|
return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
|
|
EXYNOS5_SATAPHY_PMU_ENABLE, false);
|
|
|
|
}
|
|
|
|
static int exynos_sata_phy_init(struct phy *phy)
|
|
{
|
|
u32 val = 0;
|
|
int ret = 0;
|
|
u8 buf[] = { 0x3a, 0x0b };
|
|
struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy);
|
|
|
|
ret = regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET,
|
|
EXYNOS5_SATAPHY_PMU_ENABLE, true);
|
|
if (ret != 0)
|
|
dev_err(&sata_phy->phy->dev, "phy init failed\n");
|
|
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
|
|
val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
val |= RESET_GLOBAL_RST_N | RESET_CMN_RST_N | RESET_CMN_BLOCK_RST_N
|
|
| RESET_CMN_I2C_RST_N | RESET_TX_RX_PIPE_RST_N
|
|
| RESET_TX_RX_BLOCK_RST_N | RESET_TX_RX_I2C_RST_N;
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
|
|
val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
val |= LINK_RESET;
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
|
|
val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
val |= RESET_CMN_RST_N;
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
|
|
val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
|
|
val &= ~PHCTRLM_REF_RATE;
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
|
|
|
|
/* High speed enable for Gen3 */
|
|
val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
|
|
val |= PHCTRLM_HIGH_SPEED;
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM);
|
|
|
|
val = readl(sata_phy->regs + EXYNOS5_SATA_CTRL0);
|
|
val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED;
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0);
|
|
|
|
val = readl(sata_phy->regs + EXYNOS5_SATA_MODE0);
|
|
val |= SATA_SPD_GEN3;
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_MODE0);
|
|
|
|
ret = i2c_master_send(sata_phy->client, buf, sizeof(buf));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* release cmu reset */
|
|
val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
val &= ~RESET_CMN_RST_N;
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
|
|
val = readl(sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
val |= RESET_CMN_RST_N;
|
|
writel(val, sata_phy->regs + EXYNOS5_SATA_RESET);
|
|
|
|
ret = wait_for_reg_status(sata_phy->regs,
|
|
EXYNOS5_SATA_PHSATA_STATM,
|
|
PHSTATM_PLL_LOCKED, 1);
|
|
if (ret < 0)
|
|
dev_err(&sata_phy->phy->dev,
|
|
"PHY PLL locking failed\n");
|
|
return ret;
|
|
}
|
|
|
|
static struct phy_ops exynos_sata_phy_ops = {
|
|
.init = exynos_sata_phy_init,
|
|
.power_on = exynos_sata_phy_power_on,
|
|
.power_off = exynos_sata_phy_power_off,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int exynos_sata_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct exynos_sata_phy *sata_phy;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct phy_provider *phy_provider;
|
|
struct device_node *node;
|
|
int ret = 0;
|
|
|
|
sata_phy = devm_kzalloc(dev, sizeof(*sata_phy), GFP_KERNEL);
|
|
if (!sata_phy)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
sata_phy->regs = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(sata_phy->regs))
|
|
return PTR_ERR(sata_phy->regs);
|
|
|
|
sata_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
|
|
"samsung,syscon-phandle");
|
|
if (IS_ERR(sata_phy->pmureg)) {
|
|
dev_err(dev, "syscon regmap lookup failed.\n");
|
|
return PTR_ERR(sata_phy->pmureg);
|
|
}
|
|
|
|
node = of_parse_phandle(dev->of_node,
|
|
"samsung,exynos-sataphy-i2c-phandle", 0);
|
|
if (!node)
|
|
return -EINVAL;
|
|
|
|
sata_phy->client = of_find_i2c_device_by_node(node);
|
|
if (!sata_phy->client)
|
|
return -EPROBE_DEFER;
|
|
|
|
dev_set_drvdata(dev, sata_phy);
|
|
|
|
sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl");
|
|
if (IS_ERR(sata_phy->phyclk)) {
|
|
dev_err(dev, "failed to get clk for PHY\n");
|
|
return PTR_ERR(sata_phy->phyclk);
|
|
}
|
|
|
|
ret = clk_prepare_enable(sata_phy->phyclk);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to enable source clk\n");
|
|
return ret;
|
|
}
|
|
|
|
sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops, NULL);
|
|
if (IS_ERR(sata_phy->phy)) {
|
|
clk_disable_unprepare(sata_phy->phyclk);
|
|
dev_err(dev, "failed to create PHY\n");
|
|
return PTR_ERR(sata_phy->phy);
|
|
}
|
|
|
|
phy_set_drvdata(sata_phy->phy, sata_phy);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev,
|
|
of_phy_simple_xlate);
|
|
if (IS_ERR(phy_provider)) {
|
|
clk_disable_unprepare(sata_phy->phyclk);
|
|
return PTR_ERR(phy_provider);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id exynos_sata_phy_of_match[] = {
|
|
{ .compatible = "samsung,exynos5250-sata-phy" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, exynos_sata_phy_of_match);
|
|
|
|
static struct platform_driver exynos_sata_phy_driver = {
|
|
.probe = exynos_sata_phy_probe,
|
|
.driver = {
|
|
.of_match_table = exynos_sata_phy_of_match,
|
|
.name = "samsung,sata-phy",
|
|
}
|
|
};
|
|
module_platform_driver(exynos_sata_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("Samsung SerDes PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Girish K S <ks.giri@samsung.com>");
|
|
MODULE_AUTHOR("Yuvaraj C D <yuvaraj.cd@samsung.com>");
|