437 строки
9.1 KiB
C
437 строки
9.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
/*
|
|
* Support for EC-connected GPIOs for identify
|
|
* LED/button on Barco P50 board
|
|
*
|
|
* Copyright (C) 2021 Barco NV
|
|
* Author: Santosh Kumar Yadav <santoshkumar.yadav@barco.com>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmi.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/gpio/machine.h>
|
|
#include <linux/input.h>
|
|
|
|
|
|
#define DRIVER_NAME "barco-p50-gpio"
|
|
|
|
/* GPIO lines */
|
|
#define P50_GPIO_LINE_LED 0
|
|
#define P50_GPIO_LINE_BTN 1
|
|
|
|
/* GPIO IO Ports */
|
|
#define P50_GPIO_IO_PORT_BASE 0x299
|
|
|
|
#define P50_PORT_DATA 0x00
|
|
#define P50_PORT_CMD 0x01
|
|
|
|
#define P50_STATUS_OBF 0x01 /* EC output buffer full */
|
|
#define P50_STATUS_IBF 0x02 /* EC input buffer full */
|
|
|
|
#define P50_CMD_READ 0xa0
|
|
#define P50_CMD_WRITE 0x50
|
|
|
|
/* EC mailbox registers */
|
|
#define P50_MBOX_REG_CMD 0x00
|
|
#define P50_MBOX_REG_STATUS 0x01
|
|
#define P50_MBOX_REG_PARAM 0x02
|
|
#define P50_MBOX_REG_DATA 0x03
|
|
|
|
#define P50_MBOX_CMD_READ_GPIO 0x11
|
|
#define P50_MBOX_CMD_WRITE_GPIO 0x12
|
|
#define P50_MBOX_CMD_CLEAR 0xff
|
|
|
|
#define P50_MBOX_STATUS_SUCCESS 0x01
|
|
|
|
#define P50_MBOX_PARAM_LED 0x12
|
|
#define P50_MBOX_PARAM_BTN 0x13
|
|
|
|
|
|
struct p50_gpio {
|
|
struct gpio_chip gc;
|
|
struct mutex lock;
|
|
unsigned long base;
|
|
struct platform_device *leds_pdev;
|
|
struct platform_device *keys_pdev;
|
|
};
|
|
|
|
static struct platform_device *gpio_pdev;
|
|
|
|
static int gpio_params[] = {
|
|
[P50_GPIO_LINE_LED] = P50_MBOX_PARAM_LED,
|
|
[P50_GPIO_LINE_BTN] = P50_MBOX_PARAM_BTN,
|
|
};
|
|
|
|
static const char * const gpio_names[] = {
|
|
[P50_GPIO_LINE_LED] = "identify-led",
|
|
[P50_GPIO_LINE_BTN] = "identify-button",
|
|
};
|
|
|
|
|
|
static struct gpiod_lookup_table p50_gpio_led_table = {
|
|
.dev_id = "leds-gpio",
|
|
.table = {
|
|
GPIO_LOOKUP_IDX(DRIVER_NAME, P50_GPIO_LINE_LED, NULL, 0, GPIO_ACTIVE_HIGH),
|
|
{}
|
|
}
|
|
};
|
|
|
|
/* GPIO LEDs */
|
|
static struct gpio_led leds[] = {
|
|
{ .name = "identify" }
|
|
};
|
|
|
|
static struct gpio_led_platform_data leds_pdata = {
|
|
.num_leds = ARRAY_SIZE(leds),
|
|
.leds = leds,
|
|
};
|
|
|
|
/* GPIO keyboard */
|
|
static struct gpio_keys_button buttons[] = {
|
|
{
|
|
.code = KEY_VENDOR,
|
|
.gpio = P50_GPIO_LINE_BTN,
|
|
.active_low = 1,
|
|
.type = EV_KEY,
|
|
.value = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data keys_pdata = {
|
|
.buttons = buttons,
|
|
.nbuttons = ARRAY_SIZE(buttons),
|
|
.poll_interval = 100,
|
|
.rep = 0,
|
|
.name = "identify",
|
|
};
|
|
|
|
|
|
/* low level access routines */
|
|
|
|
static int p50_wait_ec(struct p50_gpio *p50, int mask, int expected)
|
|
{
|
|
int i, val;
|
|
|
|
for (i = 0; i < 100; i++) {
|
|
val = inb(p50->base + P50_PORT_CMD) & mask;
|
|
if (val == expected)
|
|
return 0;
|
|
usleep_range(500, 2000);
|
|
}
|
|
|
|
dev_err(p50->gc.parent, "Timed out waiting for EC (0x%x)\n", val);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
|
|
static int p50_read_mbox_reg(struct p50_gpio *p50, int reg)
|
|
{
|
|
int ret;
|
|
|
|
ret = p50_wait_ec(p50, P50_STATUS_IBF, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* clear output buffer flag, prevent unfinished commands */
|
|
inb(p50->base + P50_PORT_DATA);
|
|
|
|
/* cmd/address */
|
|
outb(P50_CMD_READ | reg, p50->base + P50_PORT_CMD);
|
|
|
|
ret = p50_wait_ec(p50, P50_STATUS_OBF, P50_STATUS_OBF);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return inb(p50->base + P50_PORT_DATA);
|
|
}
|
|
|
|
static int p50_write_mbox_reg(struct p50_gpio *p50, int reg, int val)
|
|
{
|
|
int ret;
|
|
|
|
ret = p50_wait_ec(p50, P50_STATUS_IBF, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* cmd/address */
|
|
outb(P50_CMD_WRITE | reg, p50->base + P50_PORT_CMD);
|
|
|
|
ret = p50_wait_ec(p50, P50_STATUS_IBF, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* data */
|
|
outb(val, p50->base + P50_PORT_DATA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* mbox routines */
|
|
|
|
static int p50_wait_mbox_idle(struct p50_gpio *p50)
|
|
{
|
|
int i, val;
|
|
|
|
for (i = 0; i < 1000; i++) {
|
|
val = p50_read_mbox_reg(p50, P50_MBOX_REG_CMD);
|
|
/* cmd is 0 when idle */
|
|
if (val <= 0)
|
|
return val;
|
|
|
|
usleep_range(500, 2000);
|
|
}
|
|
|
|
dev_err(p50->gc.parent, "Timed out waiting for EC mbox idle (CMD: 0x%x)\n", val);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int p50_send_mbox_cmd(struct p50_gpio *p50, int cmd, int param, int data)
|
|
{
|
|
int ret;
|
|
|
|
ret = p50_wait_mbox_idle(p50);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = p50_write_mbox_reg(p50, P50_MBOX_REG_DATA, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = p50_write_mbox_reg(p50, P50_MBOX_REG_PARAM, param);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = p50_write_mbox_reg(p50, P50_MBOX_REG_CMD, cmd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = p50_wait_mbox_idle(p50);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = p50_read_mbox_reg(p50, P50_MBOX_REG_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (ret == P50_MBOX_STATUS_SUCCESS)
|
|
return 0;
|
|
|
|
dev_err(p50->gc.parent, "Mbox command failed (CMD=0x%x STAT=0x%x PARAM=0x%x DATA=0x%x)\n",
|
|
cmd, ret, param, data);
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
|
|
/* gpio routines */
|
|
|
|
static int p50_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
switch (offset) {
|
|
case P50_GPIO_LINE_BTN:
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
|
|
case P50_GPIO_LINE_LED:
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int p50_gpio_get(struct gpio_chip *gc, unsigned int offset)
|
|
{
|
|
struct p50_gpio *p50 = gpiochip_get_data(gc);
|
|
int ret;
|
|
|
|
mutex_lock(&p50->lock);
|
|
|
|
ret = p50_send_mbox_cmd(p50, P50_MBOX_CMD_READ_GPIO, gpio_params[offset], 0);
|
|
if (ret == 0)
|
|
ret = p50_read_mbox_reg(p50, P50_MBOX_REG_DATA);
|
|
|
|
mutex_unlock(&p50->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void p50_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
|
|
{
|
|
struct p50_gpio *p50 = gpiochip_get_data(gc);
|
|
|
|
mutex_lock(&p50->lock);
|
|
|
|
p50_send_mbox_cmd(p50, P50_MBOX_CMD_WRITE_GPIO, gpio_params[offset], value);
|
|
|
|
mutex_unlock(&p50->lock);
|
|
}
|
|
|
|
static int p50_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct p50_gpio *p50;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "Cannot get I/O ports\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!devm_request_region(&pdev->dev, res->start, resource_size(res), pdev->name)) {
|
|
dev_err(&pdev->dev, "Unable to reserve I/O region\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
p50 = devm_kzalloc(&pdev->dev, sizeof(*p50), GFP_KERNEL);
|
|
if (!p50)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, p50);
|
|
mutex_init(&p50->lock);
|
|
p50->base = res->start;
|
|
p50->gc.owner = THIS_MODULE;
|
|
p50->gc.parent = &pdev->dev;
|
|
p50->gc.label = dev_name(&pdev->dev);
|
|
p50->gc.ngpio = ARRAY_SIZE(gpio_names);
|
|
p50->gc.names = gpio_names;
|
|
p50->gc.can_sleep = true;
|
|
p50->gc.base = -1;
|
|
p50->gc.get_direction = p50_gpio_get_direction;
|
|
p50->gc.get = p50_gpio_get;
|
|
p50->gc.set = p50_gpio_set;
|
|
|
|
|
|
/* reset mbox */
|
|
ret = p50_wait_mbox_idle(p50);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = p50_write_mbox_reg(p50, P50_MBOX_REG_CMD, P50_MBOX_CMD_CLEAR);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = p50_wait_mbox_idle(p50);
|
|
if (ret)
|
|
return ret;
|
|
|
|
|
|
ret = devm_gpiochip_add_data(&pdev->dev, &p50->gc, p50);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Could not register gpiochip: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
gpiod_add_lookup_table(&p50_gpio_led_table);
|
|
|
|
p50->leds_pdev = platform_device_register_data(&pdev->dev,
|
|
"leds-gpio", PLATFORM_DEVID_NONE, &leds_pdata, sizeof(leds_pdata));
|
|
|
|
if (IS_ERR(p50->leds_pdev)) {
|
|
ret = PTR_ERR(p50->leds_pdev);
|
|
dev_err(&pdev->dev, "Could not register leds-gpio: %d\n", ret);
|
|
goto err_leds;
|
|
}
|
|
|
|
/* gpio-keys-polled uses old-style gpio interface, pass the right identifier */
|
|
buttons[0].gpio += p50->gc.base;
|
|
|
|
p50->keys_pdev =
|
|
platform_device_register_data(&pdev->dev, "gpio-keys-polled",
|
|
PLATFORM_DEVID_NONE,
|
|
&keys_pdata, sizeof(keys_pdata));
|
|
|
|
if (IS_ERR(p50->keys_pdev)) {
|
|
ret = PTR_ERR(p50->keys_pdev);
|
|
dev_err(&pdev->dev, "Could not register gpio-keys-polled: %d\n", ret);
|
|
goto err_keys;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_keys:
|
|
platform_device_unregister(p50->leds_pdev);
|
|
err_leds:
|
|
gpiod_remove_lookup_table(&p50_gpio_led_table);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int p50_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct p50_gpio *p50 = platform_get_drvdata(pdev);
|
|
|
|
platform_device_unregister(p50->keys_pdev);
|
|
platform_device_unregister(p50->leds_pdev);
|
|
|
|
gpiod_remove_lookup_table(&p50_gpio_led_table);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver p50_gpio_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
},
|
|
.probe = p50_gpio_probe,
|
|
.remove = p50_gpio_remove,
|
|
};
|
|
|
|
/* Board setup */
|
|
static const struct dmi_system_id dmi_ids[] __initconst = {
|
|
{
|
|
.matches = {
|
|
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Barco"),
|
|
DMI_EXACT_MATCH(DMI_PRODUCT_FAMILY, "P50")
|
|
},
|
|
},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(dmi, dmi_ids);
|
|
|
|
static int __init p50_module_init(void)
|
|
{
|
|
struct resource res = DEFINE_RES_IO(P50_GPIO_IO_PORT_BASE, P50_PORT_CMD + 1);
|
|
|
|
if (!dmi_first_match(dmi_ids))
|
|
return -ENODEV;
|
|
|
|
platform_driver_register(&p50_gpio_driver);
|
|
|
|
gpio_pdev = platform_device_register_simple(DRIVER_NAME, PLATFORM_DEVID_NONE, &res, 1);
|
|
if (IS_ERR(gpio_pdev)) {
|
|
pr_err("failed registering %s: %ld\n", DRIVER_NAME, PTR_ERR(gpio_pdev));
|
|
platform_driver_unregister(&p50_gpio_driver);
|
|
return PTR_ERR(gpio_pdev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit p50_module_exit(void)
|
|
{
|
|
platform_device_unregister(gpio_pdev);
|
|
platform_driver_unregister(&p50_gpio_driver);
|
|
}
|
|
|
|
module_init(p50_module_init);
|
|
module_exit(p50_module_exit);
|
|
|
|
MODULE_AUTHOR("Santosh Kumar Yadav, Barco NV <santoshkumar.yadav@barco.com>");
|
|
MODULE_DESCRIPTION("Barco P50 identify GPIOs driver");
|
|
MODULE_LICENSE("GPL");
|