846 строки
20 KiB
C
846 строки
20 KiB
C
/*
|
|
* pxa-ssp.c -- ALSA Soc Audio Layer
|
|
*
|
|
* Copyright 2005,2008 Wolfson Microelectronics PLC.
|
|
* Author: Liam Girdwood
|
|
* Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* TODO:
|
|
* o Test network mode for > 16bit sample size
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pxa2xx_ssp.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/pxa2xx-lib.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/dma.h>
|
|
#include <mach/audio.h>
|
|
|
|
#include "../../arm/pxa2xx-pcm.h"
|
|
#include "pxa-ssp.h"
|
|
|
|
/*
|
|
* SSP audio private data
|
|
*/
|
|
struct ssp_priv {
|
|
struct ssp_device *ssp;
|
|
unsigned int sysclk;
|
|
int dai_fmt;
|
|
#ifdef CONFIG_PM
|
|
uint32_t cr0;
|
|
uint32_t cr1;
|
|
uint32_t to;
|
|
uint32_t psp;
|
|
#endif
|
|
};
|
|
|
|
static void dump_registers(struct ssp_device *ssp)
|
|
{
|
|
dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
|
|
pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1),
|
|
pxa_ssp_read_reg(ssp, SSTO));
|
|
|
|
dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
|
|
pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR),
|
|
pxa_ssp_read_reg(ssp, SSACD));
|
|
}
|
|
|
|
static void pxa_ssp_enable(struct ssp_device *ssp)
|
|
{
|
|
uint32_t sscr0;
|
|
|
|
sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE;
|
|
__raw_writel(sscr0, ssp->mmio_base + SSCR0);
|
|
}
|
|
|
|
static void pxa_ssp_disable(struct ssp_device *ssp)
|
|
{
|
|
uint32_t sscr0;
|
|
|
|
sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE;
|
|
__raw_writel(sscr0, ssp->mmio_base + SSCR0);
|
|
}
|
|
|
|
struct pxa2xx_pcm_dma_data {
|
|
struct pxa2xx_pcm_dma_params params;
|
|
char name[20];
|
|
};
|
|
|
|
static struct pxa2xx_pcm_dma_params *
|
|
pxa_ssp_get_dma_params(struct ssp_device *ssp, int width4, int out)
|
|
{
|
|
struct pxa2xx_pcm_dma_data *dma;
|
|
|
|
dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL);
|
|
if (dma == NULL)
|
|
return NULL;
|
|
|
|
snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id,
|
|
width4 ? "32-bit" : "16-bit", out ? "out" : "in");
|
|
|
|
dma->params.name = dma->name;
|
|
dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx);
|
|
dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) :
|
|
(DCMD_INCTRGADDR | DCMD_FLOWSRC)) |
|
|
(width4 ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16;
|
|
dma->params.dev_addr = ssp->phys_base + SSDR;
|
|
|
|
return &dma->params;
|
|
}
|
|
|
|
static int pxa_ssp_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
int ret = 0;
|
|
|
|
if (!cpu_dai->active) {
|
|
clk_enable(ssp->clk);
|
|
pxa_ssp_disable(ssp);
|
|
}
|
|
|
|
kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
|
|
snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
|
|
if (!cpu_dai->active) {
|
|
pxa_ssp_disable(ssp);
|
|
clk_disable(ssp->clk);
|
|
}
|
|
|
|
kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
|
|
snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
|
|
if (!cpu_dai->active)
|
|
clk_enable(ssp->clk);
|
|
|
|
priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
|
|
priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
|
|
priv->to = __raw_readl(ssp->mmio_base + SSTO);
|
|
priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
|
|
|
|
pxa_ssp_disable(ssp);
|
|
clk_disable(ssp->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
|
|
|
|
clk_enable(ssp->clk);
|
|
|
|
__raw_writel(sssr, ssp->mmio_base + SSSR);
|
|
__raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
|
|
__raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
|
|
__raw_writel(priv->to, ssp->mmio_base + SSTO);
|
|
__raw_writel(priv->psp, ssp->mmio_base + SSPSP);
|
|
|
|
if (cpu_dai->active)
|
|
pxa_ssp_enable(ssp);
|
|
else
|
|
clk_disable(ssp->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define pxa_ssp_suspend NULL
|
|
#define pxa_ssp_resume NULL
|
|
#endif
|
|
|
|
/**
|
|
* ssp_set_clkdiv - set SSP clock divider
|
|
* @div: serial clock rate divider
|
|
*/
|
|
static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div)
|
|
{
|
|
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
|
|
if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
|
|
sscr0 &= ~0x0000ff00;
|
|
sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
|
|
} else {
|
|
sscr0 &= ~0x000fff00;
|
|
sscr0 |= (div - 1) << 8; /* 1..4096 */
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
}
|
|
|
|
/**
|
|
* pxa_ssp_get_clkdiv - get SSP clock divider
|
|
*/
|
|
static u32 pxa_ssp_get_scr(struct ssp_device *ssp)
|
|
{
|
|
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
u32 div;
|
|
|
|
if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
|
|
div = ((sscr0 >> 8) & 0xff) * 2 + 2;
|
|
else
|
|
div = ((sscr0 >> 8) & 0xfff) + 1;
|
|
return div;
|
|
}
|
|
|
|
/*
|
|
* Set the SSP ports SYSCLK.
|
|
*/
|
|
static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
int val;
|
|
|
|
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
|
|
~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
|
|
|
|
dev_dbg(&ssp->pdev->dev,
|
|
"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
|
|
cpu_dai->id, clk_id, freq);
|
|
|
|
switch (clk_id) {
|
|
case PXA_SSP_CLK_NET_PLL:
|
|
sscr0 |= SSCR0_MOD;
|
|
break;
|
|
case PXA_SSP_CLK_PLL:
|
|
/* Internal PLL is fixed */
|
|
if (cpu_is_pxa25x())
|
|
priv->sysclk = 1843200;
|
|
else
|
|
priv->sysclk = 13000000;
|
|
break;
|
|
case PXA_SSP_CLK_EXT:
|
|
priv->sysclk = freq;
|
|
sscr0 |= SSCR0_ECS;
|
|
break;
|
|
case PXA_SSP_CLK_NET:
|
|
priv->sysclk = freq;
|
|
sscr0 |= SSCR0_NCS | SSCR0_MOD;
|
|
break;
|
|
case PXA_SSP_CLK_AUDIO:
|
|
priv->sysclk = 0;
|
|
pxa_ssp_set_scr(ssp, 1);
|
|
sscr0 |= SSCR0_ACS;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* The SSP clock must be disabled when changing SSP clock mode
|
|
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
|
|
if (!cpu_is_pxa3xx())
|
|
clk_disable(ssp->clk);
|
|
val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0;
|
|
pxa_ssp_write_reg(ssp, SSCR0, val);
|
|
if (!cpu_is_pxa3xx())
|
|
clk_enable(ssp->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the SSP clock dividers.
|
|
*/
|
|
static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
|
|
int div_id, int div)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
int val;
|
|
|
|
switch (div_id) {
|
|
case PXA_SSP_AUDIO_DIV_ACDS:
|
|
val = (pxa_ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div);
|
|
pxa_ssp_write_reg(ssp, SSACD, val);
|
|
break;
|
|
case PXA_SSP_AUDIO_DIV_SCDB:
|
|
val = pxa_ssp_read_reg(ssp, SSACD);
|
|
val &= ~SSACD_SCDB;
|
|
#if defined(CONFIG_PXA3xx)
|
|
if (cpu_is_pxa3xx())
|
|
val &= ~SSACD_SCDX8;
|
|
#endif
|
|
switch (div) {
|
|
case PXA_SSP_CLK_SCDB_1:
|
|
val |= SSACD_SCDB;
|
|
break;
|
|
case PXA_SSP_CLK_SCDB_4:
|
|
break;
|
|
#if defined(CONFIG_PXA3xx)
|
|
case PXA_SSP_CLK_SCDB_8:
|
|
if (cpu_is_pxa3xx())
|
|
val |= SSACD_SCDX8;
|
|
else
|
|
return -EINVAL;
|
|
break;
|
|
#endif
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSACD, val);
|
|
break;
|
|
case PXA_SSP_DIV_SCR:
|
|
pxa_ssp_set_scr(ssp, div);
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configure the PLL frequency pxa27x and (afaik - pxa320 only)
|
|
*/
|
|
static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id,
|
|
int source, unsigned int freq_in, unsigned int freq_out)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
|
|
|
|
#if defined(CONFIG_PXA3xx)
|
|
if (cpu_is_pxa3xx())
|
|
pxa_ssp_write_reg(ssp, SSACDD, 0);
|
|
#endif
|
|
|
|
switch (freq_out) {
|
|
case 5622000:
|
|
break;
|
|
case 11345000:
|
|
ssacd |= (0x1 << 4);
|
|
break;
|
|
case 12235000:
|
|
ssacd |= (0x2 << 4);
|
|
break;
|
|
case 14857000:
|
|
ssacd |= (0x3 << 4);
|
|
break;
|
|
case 32842000:
|
|
ssacd |= (0x4 << 4);
|
|
break;
|
|
case 48000000:
|
|
ssacd |= (0x5 << 4);
|
|
break;
|
|
case 0:
|
|
/* Disable */
|
|
break;
|
|
|
|
default:
|
|
#ifdef CONFIG_PXA3xx
|
|
/* PXA3xx has a clock ditherer which can be used to generate
|
|
* a wider range of frequencies - calculate a value for it.
|
|
*/
|
|
if (cpu_is_pxa3xx()) {
|
|
u32 val;
|
|
u64 tmp = 19968;
|
|
tmp *= 1000000;
|
|
do_div(tmp, freq_out);
|
|
val = tmp;
|
|
|
|
val = (val << 16) | 64;
|
|
pxa_ssp_write_reg(ssp, SSACDD, val);
|
|
|
|
ssacd |= (0x6 << 4);
|
|
|
|
dev_dbg(&ssp->pdev->dev,
|
|
"Using SSACDD %x to supply %uHz\n",
|
|
val, freq_out);
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSACD, ssacd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the active slots in TDM/Network mode
|
|
*/
|
|
static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
|
|
unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 sscr0;
|
|
|
|
sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS);
|
|
|
|
/* set slot width */
|
|
if (slot_width > 16)
|
|
sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16);
|
|
else
|
|
sscr0 |= SSCR0_DataSize(slot_width);
|
|
|
|
if (slots > 1) {
|
|
/* enable network mode */
|
|
sscr0 |= SSCR0_MOD;
|
|
|
|
/* set number of active slots */
|
|
sscr0 |= SSCR0_SlotsPerFrm(slots);
|
|
|
|
/* set active slot mask */
|
|
pxa_ssp_write_reg(ssp, SSTSA, tx_mask);
|
|
pxa_ssp_write_reg(ssp, SSRSA, rx_mask);
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Tristate the SSP DAI lines
|
|
*/
|
|
static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
|
|
int tristate)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 sscr1;
|
|
|
|
sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
|
|
if (tristate)
|
|
sscr1 &= ~SSCR1_TTE;
|
|
else
|
|
sscr1 |= SSCR1_TTE;
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up the SSP DAI format.
|
|
* The SSP Port must be inactive before calling this function as the
|
|
* physical interface format is changed.
|
|
*/
|
|
static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 sscr0, sscr1, sspsp, scfr;
|
|
|
|
/* check if we need to change anything at all */
|
|
if (priv->dai_fmt == fmt)
|
|
return 0;
|
|
|
|
/* we can only change the settings if the port is not in use */
|
|
if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) {
|
|
dev_err(&ssp->pdev->dev,
|
|
"can't change hardware dai format: stream is in use");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* reset port settings */
|
|
sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
|
|
~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
|
|
sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7);
|
|
sspsp = 0;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
sspsp |= SSPSP_SFRMP;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
sspsp |= SSPSP_SCMODE(2);
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
sscr0 |= SSCR0_PSP;
|
|
sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
|
|
/* See hw_params() */
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
sspsp |= SSPSP_FSRT;
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
sscr0 |= SSCR0_MOD | SSCR0_PSP;
|
|
sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR;
|
|
pxa_ssp_write_reg(ssp, SSCR1, scfr);
|
|
|
|
while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY)
|
|
cpu_relax();
|
|
break;
|
|
}
|
|
|
|
dump_registers(ssp);
|
|
|
|
/* Since we are configuring the timings for the format by hand
|
|
* we have to defer some things until hw_params() where we
|
|
* know parameters like the sample size.
|
|
*/
|
|
priv->dai_fmt = fmt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the SSP audio DMA parameters and sample size.
|
|
* Can be called multiple times by oss emulation.
|
|
*/
|
|
static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
int chn = params_channels(params);
|
|
u32 sscr0;
|
|
u32 sspsp;
|
|
int width = snd_pcm_format_physical_width(params_format(params));
|
|
int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf;
|
|
struct pxa2xx_pcm_dma_params *dma_data;
|
|
|
|
dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
|
|
|
|
/* generate correct DMA params */
|
|
kfree(dma_data);
|
|
|
|
/* Network mode with one active slot (ttsa == 1) can be used
|
|
* to force 16-bit frame width on the wire (for S16_LE), even
|
|
* with two channels. Use 16-bit DMA transfers for this case.
|
|
*/
|
|
dma_data = pxa_ssp_get_dma_params(ssp,
|
|
((chn == 2) && (ttsa != 1)) || (width == 32),
|
|
substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
|
|
|
|
snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
|
|
|
|
/* we can only change the settings if the port is not in use */
|
|
if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
|
|
return 0;
|
|
|
|
/* clear selected SSP bits */
|
|
sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS);
|
|
|
|
/* bit size */
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
#ifdef CONFIG_PXA3xx
|
|
if (cpu_is_pxa3xx())
|
|
sscr0 |= SSCR0_FPCKE;
|
|
#endif
|
|
sscr0 |= SSCR0_DataSize(16);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
|
|
break;
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
sspsp = pxa_ssp_read_reg(ssp, SSPSP);
|
|
|
|
if ((pxa_ssp_get_scr(ssp) == 4) && (width == 16)) {
|
|
/* This is a special case where the bitclk is 64fs
|
|
* and we're not dealing with 2*32 bits of audio
|
|
* samples.
|
|
*
|
|
* The SSP values used for that are all found out by
|
|
* trying and failing a lot; some of the registers
|
|
* needed for that mode are only available on PXA3xx.
|
|
*/
|
|
|
|
#ifdef CONFIG_PXA3xx
|
|
if (!cpu_is_pxa3xx())
|
|
return -EINVAL;
|
|
|
|
sspsp |= SSPSP_SFRMWDTH(width * 2);
|
|
sspsp |= SSPSP_SFRMDLY(width * 4);
|
|
sspsp |= SSPSP_EDMYSTOP(3);
|
|
sspsp |= SSPSP_DMYSTOP(3);
|
|
sspsp |= SSPSP_DMYSTRT(1);
|
|
#else
|
|
return -EINVAL;
|
|
#endif
|
|
} else {
|
|
/* The frame width is the width the LRCLK is
|
|
* asserted for; the delay is expressed in
|
|
* half cycle units. We need the extra cycle
|
|
* because the data starts clocking out one BCLK
|
|
* after LRCLK changes polarity.
|
|
*/
|
|
sspsp |= SSPSP_SFRMWDTH(width + 1);
|
|
sspsp |= SSPSP_SFRMDLY((width + 1) * 2);
|
|
sspsp |= SSPSP_DMYSTRT(1);
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* When we use a network mode, we always require TDM slots
|
|
* - complain loudly and fail if they've not been set up yet.
|
|
*/
|
|
if ((sscr0 & SSCR0_MOD) && !ttsa) {
|
|
dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dump_registers(ssp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream,
|
|
struct ssp_device *ssp, int value)
|
|
{
|
|
uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
|
|
uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP);
|
|
uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR);
|
|
|
|
if (value && (sscr0 & SSCR0_SSE))
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
if (value)
|
|
sscr1 |= SSCR1_TSRE;
|
|
else
|
|
sscr1 &= ~SSCR1_TSRE;
|
|
} else {
|
|
if (value)
|
|
sscr1 |= SSCR1_RSRE;
|
|
else
|
|
sscr1 &= ~SSCR1_RSRE;
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
|
|
if (value) {
|
|
pxa_ssp_write_reg(ssp, SSSR, sssr);
|
|
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE);
|
|
}
|
|
}
|
|
|
|
static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
int ret = 0;
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
int val;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
pxa_ssp_enable(ssp);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
pxa_ssp_set_running_bit(substream, ssp, 1);
|
|
val = pxa_ssp_read_reg(ssp, SSSR);
|
|
pxa_ssp_write_reg(ssp, SSSR, val);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
pxa_ssp_set_running_bit(substream, ssp, 1);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
pxa_ssp_set_running_bit(substream, ssp, 0);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
pxa_ssp_disable(ssp);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
pxa_ssp_set_running_bit(substream, ssp, 0);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
dump_registers(ssp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pxa_ssp_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct ssp_priv *priv;
|
|
int ret;
|
|
|
|
priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio");
|
|
if (priv->ssp == NULL) {
|
|
ret = -ENODEV;
|
|
goto err_priv;
|
|
}
|
|
|
|
priv->dai_fmt = (unsigned int) -1;
|
|
snd_soc_dai_set_drvdata(dai, priv);
|
|
|
|
return 0;
|
|
|
|
err_priv:
|
|
kfree(priv);
|
|
return ret;
|
|
}
|
|
|
|
static int pxa_ssp_remove(struct snd_soc_dai *dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pxa_ssp_free(priv->ssp);
|
|
kfree(priv);
|
|
return 0;
|
|
}
|
|
|
|
#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
|
|
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
|
|
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
|
|
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
|
|
|
|
#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE | \
|
|
SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops pxa_ssp_dai_ops = {
|
|
.startup = pxa_ssp_startup,
|
|
.shutdown = pxa_ssp_shutdown,
|
|
.trigger = pxa_ssp_trigger,
|
|
.hw_params = pxa_ssp_hw_params,
|
|
.set_sysclk = pxa_ssp_set_dai_sysclk,
|
|
.set_clkdiv = pxa_ssp_set_dai_clkdiv,
|
|
.set_pll = pxa_ssp_set_dai_pll,
|
|
.set_fmt = pxa_ssp_set_dai_fmt,
|
|
.set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
|
|
.set_tristate = pxa_ssp_set_dai_tristate,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver pxa_ssp_dai = {
|
|
.probe = pxa_ssp_probe,
|
|
.remove = pxa_ssp_remove,
|
|
.suspend = pxa_ssp_suspend,
|
|
.resume = pxa_ssp_resume,
|
|
.playback = {
|
|
.channels_min = 1,
|
|
.channels_max = 8,
|
|
.rates = PXA_SSP_RATES,
|
|
.formats = PXA_SSP_FORMATS,
|
|
},
|
|
.capture = {
|
|
.channels_min = 1,
|
|
.channels_max = 8,
|
|
.rates = PXA_SSP_RATES,
|
|
.formats = PXA_SSP_FORMATS,
|
|
},
|
|
.ops = &pxa_ssp_dai_ops,
|
|
};
|
|
|
|
static __devinit int asoc_ssp_probe(struct platform_device *pdev)
|
|
{
|
|
return snd_soc_register_dai(&pdev->dev, &pxa_ssp_dai);
|
|
}
|
|
|
|
static int __devexit asoc_ssp_remove(struct platform_device *pdev)
|
|
{
|
|
snd_soc_unregister_dai(&pdev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver asoc_ssp_driver = {
|
|
.driver = {
|
|
.name = "pxa-ssp-dai",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
|
|
.probe = asoc_ssp_probe,
|
|
.remove = __devexit_p(asoc_ssp_remove),
|
|
};
|
|
|
|
module_platform_driver(asoc_ssp_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface");
|
|
MODULE_LICENSE("GPL");
|