1980 строки
59 KiB
C
1980 строки
59 KiB
C
/*
|
|
* Copyright (c) 2004 James Courtier-Dutton <James@superbug.demon.co.uk>
|
|
* Driver CA0106 chips. e.g. Sound Blaster Audigy LS and Live 24bit
|
|
* Version: 0.0.25
|
|
*
|
|
* FEATURES currently supported:
|
|
* Front, Rear and Center/LFE.
|
|
* Surround40 and Surround51.
|
|
* Capture from MIC an LINE IN input.
|
|
* SPDIF digital playback of PCM stereo and AC3/DTS works.
|
|
* (One can use a standard mono mini-jack to one RCA plugs cable.
|
|
* or one can use a standard stereo mini-jack to two RCA plugs cable.
|
|
* Plug one of the RCA plugs into the Coax input of the external decoder/receiver.)
|
|
* ( In theory one could output 3 different AC3 streams at once, to 3 different SPDIF outputs. )
|
|
* Notes on how to capture sound:
|
|
* The AC97 is used in the PLAYBACK direction.
|
|
* The output from the AC97 chip, instead of reaching the speakers, is fed into the Philips 1361T ADC.
|
|
* So, to record from the MIC, set the MIC Playback volume to max,
|
|
* unmute the MIC and turn up the MASTER Playback volume.
|
|
* So, to prevent feedback when capturing, minimise the "Capture feedback into Playback" volume.
|
|
*
|
|
* The only playback controls that currently do anything are: -
|
|
* Analog Front
|
|
* Analog Rear
|
|
* Analog Center/LFE
|
|
* SPDIF Front
|
|
* SPDIF Rear
|
|
* SPDIF Center/LFE
|
|
*
|
|
* For capture from Mic in or Line in.
|
|
* Digital/Analog ( switch must be in Analog mode for CAPTURE. )
|
|
*
|
|
* CAPTURE feedback into PLAYBACK
|
|
*
|
|
* Changelog:
|
|
* Support interrupts per period.
|
|
* Removed noise from Center/LFE channel when in Analog mode.
|
|
* Rename and remove mixer controls.
|
|
* 0.0.6
|
|
* Use separate card based DMA buffer for periods table list.
|
|
* 0.0.7
|
|
* Change remove and rename ctrls into lists.
|
|
* 0.0.8
|
|
* Try to fix capture sources.
|
|
* 0.0.9
|
|
* Fix AC3 output.
|
|
* Enable S32_LE format support.
|
|
* 0.0.10
|
|
* Enable playback 48000 and 96000 rates. (Rates other that these do not work, even with "plug:front".)
|
|
* 0.0.11
|
|
* Add Model name recognition.
|
|
* 0.0.12
|
|
* Correct interrupt timing. interrupt at end of period, instead of in the middle of a playback period.
|
|
* Remove redundent "voice" handling.
|
|
* 0.0.13
|
|
* Single trigger call for multi channels.
|
|
* 0.0.14
|
|
* Set limits based on what the sound card hardware can do.
|
|
* playback periods_min=2, periods_max=8
|
|
* capture hw constraints require period_size = n * 64 bytes.
|
|
* playback hw constraints require period_size = n * 64 bytes.
|
|
* 0.0.15
|
|
* Minor updates.
|
|
* 0.0.16
|
|
* Implement 192000 sample rate.
|
|
* 0.0.17
|
|
* Add support for SB0410 and SB0413.
|
|
* 0.0.18
|
|
* Modified Copyright message.
|
|
* 0.0.19
|
|
* Finally fix support for SB Live 24 bit. SB0410 and SB0413.
|
|
* The output codec needs resetting, otherwise all output is muted.
|
|
* 0.0.20
|
|
* Merge "pci_disable_device(pci);" fixes.
|
|
* 0.0.21
|
|
* Add 4 capture channels. (SPDIF only comes in on channel 0. )
|
|
* Add SPDIF capture using optional digital I/O module for SB Live 24bit. (Analog capture does not yet work.)
|
|
* 0.0.22
|
|
* Add support for MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97. From kiksen, bug #901
|
|
* 0.0.23
|
|
* Implement support for Line-in capture on SB Live 24bit.
|
|
* 0.0.24
|
|
* Add support for mute control on SB Live 24bit (cards w/ SPI DAC)
|
|
* 0.0.25
|
|
* Powerdown SPI DAC channels when not in use
|
|
*
|
|
* BUGS:
|
|
* Some stability problems when unloading the snd-ca0106 kernel module.
|
|
* --
|
|
*
|
|
* TODO:
|
|
* 4 Capture channels, only one implemented so far.
|
|
* Other capture rates apart from 48khz not implemented.
|
|
* MIDI
|
|
* --
|
|
* GENERAL INFO:
|
|
* Model: SB0310
|
|
* P17 Chip: CA0106-DAT
|
|
* AC97 Codec: STAC 9721
|
|
* ADC: Philips 1361T (Stereo 24bit)
|
|
* DAC: WM8746EDS (6-channel, 24bit, 192Khz)
|
|
*
|
|
* GENERAL INFO:
|
|
* Model: SB0410
|
|
* P17 Chip: CA0106-DAT
|
|
* AC97 Codec: None
|
|
* ADC: WM8775EDS (4 Channel)
|
|
* DAC: CS4382 (114 dB, 24-Bit, 192 kHz, 8-Channel D/A Converter with DSD Support)
|
|
* SPDIF Out control switches between Mic in and SPDIF out.
|
|
* No sound out or mic input working yet.
|
|
*
|
|
* GENERAL INFO:
|
|
* Model: SB0413
|
|
* P17 Chip: CA0106-DAT
|
|
* AC97 Codec: None.
|
|
* ADC: Unknown
|
|
* DAC: Unknown
|
|
* Trying to handle it like the SB0410.
|
|
*
|
|
* This code was initially based on code from ALSA's emu10k1x.c which is:
|
|
* Copyright (c) by Francisco Moraes <fmoraes@nc.rr.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <sound/core.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/ac97_codec.h>
|
|
#include <sound/info.h>
|
|
|
|
MODULE_AUTHOR("James Courtier-Dutton <James@superbug.demon.co.uk>");
|
|
MODULE_DESCRIPTION("CA0106");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_SUPPORTED_DEVICE("{{Creative,SB CA0106 chip}}");
|
|
|
|
// module parameters (see "Module Parameters")
|
|
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
|
|
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
|
|
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
|
|
static uint subsystem[SNDRV_CARDS]; /* Force card subsystem model */
|
|
|
|
module_param_array(index, int, NULL, 0444);
|
|
MODULE_PARM_DESC(index, "Index value for the CA0106 soundcard.");
|
|
module_param_array(id, charp, NULL, 0444);
|
|
MODULE_PARM_DESC(id, "ID string for the CA0106 soundcard.");
|
|
module_param_array(enable, bool, NULL, 0444);
|
|
MODULE_PARM_DESC(enable, "Enable the CA0106 soundcard.");
|
|
module_param_array(subsystem, uint, NULL, 0444);
|
|
MODULE_PARM_DESC(subsystem, "Force card subsystem model.");
|
|
|
|
#include "ca0106.h"
|
|
|
|
static struct snd_ca0106_details ca0106_chip_details[] = {
|
|
/* Sound Blaster X-Fi Extreme Audio. This does not have an AC97. 53SB079000000 */
|
|
/* It is really just a normal SB Live 24bit. */
|
|
/* Tested:
|
|
* See ALSA bug#3251
|
|
*/
|
|
{ .serial = 0x10131102,
|
|
.name = "X-Fi Extreme Audio [SBxxxx]",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 1 } ,
|
|
/* Sound Blaster X-Fi Extreme Audio. This does not have an AC97. 53SB079000000 */
|
|
/* It is really just a normal SB Live 24bit. */
|
|
/*
|
|
* CTRL:CA0111-WTLF
|
|
* ADC: WM8775SEDS
|
|
* DAC: CS4382-KQZ
|
|
*/
|
|
/* Tested:
|
|
* Playback on front, rear, center/lfe speakers
|
|
* Capture from Mic in.
|
|
* Not-Tested:
|
|
* Capture from Line in.
|
|
* Playback to digital out.
|
|
*/
|
|
{ .serial = 0x10121102,
|
|
.name = "X-Fi Extreme Audio [SB0790]",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 1 } ,
|
|
/* New Dell Sound Blaster Live! 7.1 24bit. This does not have an AC97. */
|
|
/* AudigyLS[SB0310] */
|
|
{ .serial = 0x10021102,
|
|
.name = "AudigyLS [SB0310]",
|
|
.ac97 = 1 } ,
|
|
/* Unknown AudigyLS that also says SB0310 on it */
|
|
{ .serial = 0x10051102,
|
|
.name = "AudigyLS [SB0310b]",
|
|
.ac97 = 1 } ,
|
|
/* New Sound Blaster Live! 7.1 24bit. This does not have an AC97. 53SB041000001 */
|
|
{ .serial = 0x10061102,
|
|
.name = "Live! 7.1 24bit [SB0410]",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 1 } ,
|
|
/* New Dell Sound Blaster Live! 7.1 24bit. This does not have an AC97. */
|
|
{ .serial = 0x10071102,
|
|
.name = "Live! 7.1 24bit [SB0413]",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 1 } ,
|
|
/* New Audigy SE. Has a different DAC. */
|
|
/* SB0570:
|
|
* CTRL:CA0106-DAT
|
|
* ADC: WM8775EDS
|
|
* DAC: WM8768GEDS
|
|
*/
|
|
{ .serial = 0x100a1102,
|
|
.name = "Audigy SE [SB0570]",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 1,
|
|
.spi_dac = 0x4021 } ,
|
|
/* New Audigy LS. Has a different DAC. */
|
|
/* SB0570:
|
|
* CTRL:CA0106-DAT
|
|
* ADC: WM8775EDS
|
|
* DAC: WM8768GEDS
|
|
*/
|
|
{ .serial = 0x10111102,
|
|
.name = "Audigy SE OEM [SB0570a]",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 1,
|
|
.spi_dac = 0x4021 } ,
|
|
/* Sound Blaster 5.1vx
|
|
* Tested: Playback on front, rear, center/lfe speakers
|
|
* Not-Tested: Capture
|
|
*/
|
|
{ .serial = 0x10041102,
|
|
.name = "Sound Blaster 5.1vx [SB1070]",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 0,
|
|
.spi_dac = 0x0124
|
|
} ,
|
|
/* MSI K8N Diamond Motherboard with onboard SB Live 24bit without AC97 */
|
|
/* SB0438
|
|
* CTRL:CA0106-DAT
|
|
* ADC: WM8775SEDS
|
|
* DAC: CS4382-KQZ
|
|
*/
|
|
{ .serial = 0x10091462,
|
|
.name = "MSI K8N Diamond MB [SB0438]",
|
|
.gpio_type = 2,
|
|
.i2c_adc = 1 } ,
|
|
/* MSI K8N Diamond PLUS MB */
|
|
{ .serial = 0x10091102,
|
|
.name = "MSI K8N Diamond MB",
|
|
.gpio_type = 2,
|
|
.i2c_adc = 1,
|
|
.spi_dac = 0x4021 } ,
|
|
/* Giga-byte GA-G1975X mobo
|
|
* Novell bnc#395807
|
|
*/
|
|
/* FIXME: the GPIO and I2C setting aren't tested well */
|
|
{ .serial = 0x1458a006,
|
|
.name = "Giga-byte GA-G1975X",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 1 },
|
|
/* Shuttle XPC SD31P which has an onboard Creative Labs
|
|
* Sound Blaster Live! 24-bit EAX
|
|
* high-definition 7.1 audio processor".
|
|
* Added using info from andrewvegan in alsa bug #1298
|
|
*/
|
|
{ .serial = 0x30381297,
|
|
.name = "Shuttle XPC SD31P [SD31P]",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 1 } ,
|
|
/* Shuttle XPC SD11G5 which has an onboard Creative Labs
|
|
* Sound Blaster Live! 24-bit EAX
|
|
* high-definition 7.1 audio processor".
|
|
* Fixes ALSA bug#1600
|
|
*/
|
|
{ .serial = 0x30411297,
|
|
.name = "Shuttle XPC SD11G5 [SD11G5]",
|
|
.gpio_type = 1,
|
|
.i2c_adc = 1 } ,
|
|
{ .serial = 0,
|
|
.name = "AudigyLS [Unknown]" }
|
|
};
|
|
|
|
/* hardware definition */
|
|
static struct snd_pcm_hardware snd_ca0106_playback_hw = {
|
|
.info = SNDRV_PCM_INFO_MMAP |
|
|
SNDRV_PCM_INFO_INTERLEAVED |
|
|
SNDRV_PCM_INFO_BLOCK_TRANSFER |
|
|
SNDRV_PCM_INFO_MMAP_VALID |
|
|
SNDRV_PCM_INFO_SYNC_START,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
|
|
.rates = (SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_96000 |
|
|
SNDRV_PCM_RATE_192000),
|
|
.rate_min = 48000,
|
|
.rate_max = 192000,
|
|
.channels_min = 2, //1,
|
|
.channels_max = 2, //6,
|
|
.buffer_bytes_max = ((65536 - 64) * 8),
|
|
.period_bytes_min = 64,
|
|
.period_bytes_max = (65536 - 64),
|
|
.periods_min = 2,
|
|
.periods_max = 8,
|
|
.fifo_size = 0,
|
|
};
|
|
|
|
static struct snd_pcm_hardware snd_ca0106_capture_hw = {
|
|
.info = (SNDRV_PCM_INFO_MMAP |
|
|
SNDRV_PCM_INFO_INTERLEAVED |
|
|
SNDRV_PCM_INFO_BLOCK_TRANSFER |
|
|
SNDRV_PCM_INFO_MMAP_VALID),
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE,
|
|
#if 0 /* FIXME: looks like 44.1kHz capture causes noisy output on 48kHz */
|
|
.rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
|
|
SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000),
|
|
.rate_min = 44100,
|
|
#else
|
|
.rates = (SNDRV_PCM_RATE_48000 |
|
|
SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_192000),
|
|
.rate_min = 48000,
|
|
#endif /* FIXME */
|
|
.rate_max = 192000,
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.buffer_bytes_max = 65536 - 128,
|
|
.period_bytes_min = 64,
|
|
.period_bytes_max = 32768 - 64,
|
|
.periods_min = 2,
|
|
.periods_max = 2,
|
|
.fifo_size = 0,
|
|
};
|
|
|
|
unsigned int snd_ca0106_ptr_read(struct snd_ca0106 * emu,
|
|
unsigned int reg,
|
|
unsigned int chn)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int regptr, val;
|
|
|
|
regptr = (reg << 16) | chn;
|
|
|
|
spin_lock_irqsave(&emu->emu_lock, flags);
|
|
outl(regptr, emu->port + PTR);
|
|
val = inl(emu->port + DATA);
|
|
spin_unlock_irqrestore(&emu->emu_lock, flags);
|
|
return val;
|
|
}
|
|
|
|
void snd_ca0106_ptr_write(struct snd_ca0106 *emu,
|
|
unsigned int reg,
|
|
unsigned int chn,
|
|
unsigned int data)
|
|
{
|
|
unsigned int regptr;
|
|
unsigned long flags;
|
|
|
|
regptr = (reg << 16) | chn;
|
|
|
|
spin_lock_irqsave(&emu->emu_lock, flags);
|
|
outl(regptr, emu->port + PTR);
|
|
outl(data, emu->port + DATA);
|
|
spin_unlock_irqrestore(&emu->emu_lock, flags);
|
|
}
|
|
|
|
int snd_ca0106_spi_write(struct snd_ca0106 * emu,
|
|
unsigned int data)
|
|
{
|
|
unsigned int reset, set;
|
|
unsigned int reg, tmp;
|
|
int n, result;
|
|
reg = SPI;
|
|
if (data > 0xffff) /* Only 16bit values allowed */
|
|
return 1;
|
|
tmp = snd_ca0106_ptr_read(emu, reg, 0);
|
|
reset = (tmp & ~0x3ffff) | 0x20000; /* Set xxx20000 */
|
|
set = reset | 0x10000; /* Set xxx1xxxx */
|
|
snd_ca0106_ptr_write(emu, reg, 0, reset | data);
|
|
tmp = snd_ca0106_ptr_read(emu, reg, 0); /* write post */
|
|
snd_ca0106_ptr_write(emu, reg, 0, set | data);
|
|
result = 1;
|
|
/* Wait for status bit to return to 0 */
|
|
for (n = 0; n < 100; n++) {
|
|
udelay(10);
|
|
tmp = snd_ca0106_ptr_read(emu, reg, 0);
|
|
if (!(tmp & 0x10000)) {
|
|
result = 0;
|
|
break;
|
|
}
|
|
}
|
|
if (result) /* Timed out */
|
|
return 1;
|
|
snd_ca0106_ptr_write(emu, reg, 0, reset | data);
|
|
tmp = snd_ca0106_ptr_read(emu, reg, 0); /* Write post */
|
|
return 0;
|
|
}
|
|
|
|
/* The ADC does not support i2c read, so only write is implemented */
|
|
int snd_ca0106_i2c_write(struct snd_ca0106 *emu,
|
|
u32 reg,
|
|
u32 value)
|
|
{
|
|
u32 tmp;
|
|
int timeout = 0;
|
|
int status;
|
|
int retry;
|
|
if ((reg > 0x7f) || (value > 0x1ff)) {
|
|
snd_printk(KERN_ERR "i2c_write: invalid values.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
tmp = reg << 25 | value << 16;
|
|
/*
|
|
snd_printk(KERN_DEBUG "I2C-write:reg=0x%x, value=0x%x\n", reg, value);
|
|
*/
|
|
/* Not sure what this I2C channel controls. */
|
|
/* snd_ca0106_ptr_write(emu, I2C_D0, 0, tmp); */
|
|
|
|
/* This controls the I2C connected to the WM8775 ADC Codec */
|
|
snd_ca0106_ptr_write(emu, I2C_D1, 0, tmp);
|
|
|
|
for (retry = 0; retry < 10; retry++) {
|
|
/* Send the data to i2c */
|
|
//tmp = snd_ca0106_ptr_read(emu, I2C_A, 0);
|
|
//tmp = tmp & ~(I2C_A_ADC_READ|I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD_MASK);
|
|
tmp = 0;
|
|
tmp = tmp | (I2C_A_ADC_LAST|I2C_A_ADC_START|I2C_A_ADC_ADD);
|
|
snd_ca0106_ptr_write(emu, I2C_A, 0, tmp);
|
|
|
|
/* Wait till the transaction ends */
|
|
while (1) {
|
|
status = snd_ca0106_ptr_read(emu, I2C_A, 0);
|
|
/*snd_printk(KERN_DEBUG "I2C:status=0x%x\n", status);*/
|
|
timeout++;
|
|
if ((status & I2C_A_ADC_START) == 0)
|
|
break;
|
|
|
|
if (timeout > 1000)
|
|
break;
|
|
}
|
|
//Read back and see if the transaction is successful
|
|
if ((status & I2C_A_ADC_ABORT) == 0)
|
|
break;
|
|
}
|
|
|
|
if (retry == 10) {
|
|
snd_printk(KERN_ERR "Writing to ADC failed!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void snd_ca0106_intr_enable(struct snd_ca0106 *emu, unsigned int intrenb)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int intr_enable;
|
|
|
|
spin_lock_irqsave(&emu->emu_lock, flags);
|
|
intr_enable = inl(emu->port + INTE) | intrenb;
|
|
outl(intr_enable, emu->port + INTE);
|
|
spin_unlock_irqrestore(&emu->emu_lock, flags);
|
|
}
|
|
|
|
static void snd_ca0106_intr_disable(struct snd_ca0106 *emu, unsigned int intrenb)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int intr_enable;
|
|
|
|
spin_lock_irqsave(&emu->emu_lock, flags);
|
|
intr_enable = inl(emu->port + INTE) & ~intrenb;
|
|
outl(intr_enable, emu->port + INTE);
|
|
spin_unlock_irqrestore(&emu->emu_lock, flags);
|
|
}
|
|
|
|
|
|
static void snd_ca0106_pcm_free_substream(struct snd_pcm_runtime *runtime)
|
|
{
|
|
kfree(runtime->private_data);
|
|
}
|
|
|
|
static const int spi_dacd_reg[] = {
|
|
SPI_DACD0_REG,
|
|
SPI_DACD1_REG,
|
|
SPI_DACD2_REG,
|
|
0,
|
|
SPI_DACD4_REG,
|
|
};
|
|
static const int spi_dacd_bit[] = {
|
|
SPI_DACD0_BIT,
|
|
SPI_DACD1_BIT,
|
|
SPI_DACD2_BIT,
|
|
0,
|
|
SPI_DACD4_BIT,
|
|
};
|
|
|
|
static void restore_spdif_bits(struct snd_ca0106 *chip, int idx)
|
|
{
|
|
if (chip->spdif_str_bits[idx] != chip->spdif_bits[idx]) {
|
|
chip->spdif_str_bits[idx] = chip->spdif_bits[idx];
|
|
snd_ca0106_ptr_write(chip, SPCS0 + idx, 0,
|
|
chip->spdif_str_bits[idx]);
|
|
}
|
|
}
|
|
|
|
static int snd_ca0106_channel_dac(struct snd_ca0106_details *details,
|
|
int channel_id)
|
|
{
|
|
switch (channel_id) {
|
|
case PCM_FRONT_CHANNEL:
|
|
return (details->spi_dac & 0xf000) >> (4 * 3);
|
|
case PCM_REAR_CHANNEL:
|
|
return (details->spi_dac & 0x0f00) >> (4 * 2);
|
|
case PCM_CENTER_LFE_CHANNEL:
|
|
return (details->spi_dac & 0x00f0) >> (4 * 1);
|
|
case PCM_UNKNOWN_CHANNEL:
|
|
return (details->spi_dac & 0x000f) >> (4 * 0);
|
|
default:
|
|
snd_printk(KERN_DEBUG "ca0106: unknown channel_id %d\n",
|
|
channel_id);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int snd_ca0106_pcm_power_dac(struct snd_ca0106 *chip, int channel_id,
|
|
int power)
|
|
{
|
|
if (chip->details->spi_dac) {
|
|
const int dac = snd_ca0106_channel_dac(chip->details,
|
|
channel_id);
|
|
const int reg = spi_dacd_reg[dac];
|
|
const int bit = spi_dacd_bit[dac];
|
|
|
|
if (power)
|
|
/* Power up */
|
|
chip->spi_dac_reg[reg] &= ~bit;
|
|
else
|
|
/* Power down */
|
|
chip->spi_dac_reg[reg] |= bit;
|
|
return snd_ca0106_spi_write(chip, chip->spi_dac_reg[reg]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* open_playback callback */
|
|
static int snd_ca0106_pcm_open_playback_channel(struct snd_pcm_substream *substream,
|
|
int channel_id)
|
|
{
|
|
struct snd_ca0106 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_ca0106_channel *channel = &(chip->playback_channels[channel_id]);
|
|
struct snd_ca0106_pcm *epcm;
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
int err;
|
|
|
|
epcm = kzalloc(sizeof(*epcm), GFP_KERNEL);
|
|
|
|
if (epcm == NULL)
|
|
return -ENOMEM;
|
|
epcm->emu = chip;
|
|
epcm->substream = substream;
|
|
epcm->channel_id=channel_id;
|
|
|
|
runtime->private_data = epcm;
|
|
runtime->private_free = snd_ca0106_pcm_free_substream;
|
|
|
|
runtime->hw = snd_ca0106_playback_hw;
|
|
|
|
channel->emu = chip;
|
|
channel->number = channel_id;
|
|
|
|
channel->use = 1;
|
|
/*
|
|
printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n",
|
|
channel_id, chip, channel);
|
|
*/
|
|
//channel->interrupt = snd_ca0106_pcm_channel_interrupt;
|
|
channel->epcm = epcm;
|
|
if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
|
|
return err;
|
|
if ((err = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64)) < 0)
|
|
return err;
|
|
snd_pcm_set_sync(substream);
|
|
|
|
/* Front channel dac should already be on */
|
|
if (channel_id != PCM_FRONT_CHANNEL) {
|
|
err = snd_ca0106_pcm_power_dac(chip, channel_id, 1);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
restore_spdif_bits(chip, channel_id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* close callback */
|
|
static int snd_ca0106_pcm_close_playback(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_ca0106 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_ca0106_pcm *epcm = runtime->private_data;
|
|
chip->playback_channels[epcm->channel_id].use = 0;
|
|
|
|
restore_spdif_bits(chip, epcm->channel_id);
|
|
|
|
/* Front channel dac should stay on */
|
|
if (epcm->channel_id != PCM_FRONT_CHANNEL) {
|
|
int err;
|
|
err = snd_ca0106_pcm_power_dac(chip, epcm->channel_id, 0);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
/* FIXME: maybe zero others */
|
|
return 0;
|
|
}
|
|
|
|
static int snd_ca0106_pcm_open_playback_front(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_ca0106_pcm_open_playback_channel(substream, PCM_FRONT_CHANNEL);
|
|
}
|
|
|
|
static int snd_ca0106_pcm_open_playback_center_lfe(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_ca0106_pcm_open_playback_channel(substream, PCM_CENTER_LFE_CHANNEL);
|
|
}
|
|
|
|
static int snd_ca0106_pcm_open_playback_unknown(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_ca0106_pcm_open_playback_channel(substream, PCM_UNKNOWN_CHANNEL);
|
|
}
|
|
|
|
static int snd_ca0106_pcm_open_playback_rear(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_ca0106_pcm_open_playback_channel(substream, PCM_REAR_CHANNEL);
|
|
}
|
|
|
|
/* open_capture callback */
|
|
static int snd_ca0106_pcm_open_capture_channel(struct snd_pcm_substream *substream,
|
|
int channel_id)
|
|
{
|
|
struct snd_ca0106 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_ca0106_channel *channel = &(chip->capture_channels[channel_id]);
|
|
struct snd_ca0106_pcm *epcm;
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
int err;
|
|
|
|
epcm = kzalloc(sizeof(*epcm), GFP_KERNEL);
|
|
if (epcm == NULL) {
|
|
snd_printk(KERN_ERR "open_capture_channel: failed epcm alloc\n");
|
|
return -ENOMEM;
|
|
}
|
|
epcm->emu = chip;
|
|
epcm->substream = substream;
|
|
epcm->channel_id=channel_id;
|
|
|
|
runtime->private_data = epcm;
|
|
runtime->private_free = snd_ca0106_pcm_free_substream;
|
|
|
|
runtime->hw = snd_ca0106_capture_hw;
|
|
|
|
channel->emu = chip;
|
|
channel->number = channel_id;
|
|
|
|
channel->use = 1;
|
|
/*
|
|
printk(KERN_DEBUG "open:channel_id=%d, chip=%p, channel=%p\n",
|
|
channel_id, chip, channel);
|
|
*/
|
|
//channel->interrupt = snd_ca0106_pcm_channel_interrupt;
|
|
channel->epcm = epcm;
|
|
if ((err = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS)) < 0)
|
|
return err;
|
|
//snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_SIZE, &hw_constraints_capture_period_sizes);
|
|
if ((err = snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 64)) < 0)
|
|
return err;
|
|
return 0;
|
|
}
|
|
|
|
/* close callback */
|
|
static int snd_ca0106_pcm_close_capture(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_ca0106 *chip = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_ca0106_pcm *epcm = runtime->private_data;
|
|
chip->capture_channels[epcm->channel_id].use = 0;
|
|
/* FIXME: maybe zero others */
|
|
return 0;
|
|
}
|
|
|
|
static int snd_ca0106_pcm_open_0_capture(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_ca0106_pcm_open_capture_channel(substream, 0);
|
|
}
|
|
|
|
static int snd_ca0106_pcm_open_1_capture(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_ca0106_pcm_open_capture_channel(substream, 1);
|
|
}
|
|
|
|
static int snd_ca0106_pcm_open_2_capture(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_ca0106_pcm_open_capture_channel(substream, 2);
|
|
}
|
|
|
|
static int snd_ca0106_pcm_open_3_capture(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_ca0106_pcm_open_capture_channel(substream, 3);
|
|
}
|
|
|
|
/* hw_params callback */
|
|
static int snd_ca0106_pcm_hw_params_playback(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *hw_params)
|
|
{
|
|
return snd_pcm_lib_malloc_pages(substream,
|
|
params_buffer_bytes(hw_params));
|
|
}
|
|
|
|
/* hw_free callback */
|
|
static int snd_ca0106_pcm_hw_free_playback(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_pcm_lib_free_pages(substream);
|
|
}
|
|
|
|
/* hw_params callback */
|
|
static int snd_ca0106_pcm_hw_params_capture(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *hw_params)
|
|
{
|
|
return snd_pcm_lib_malloc_pages(substream,
|
|
params_buffer_bytes(hw_params));
|
|
}
|
|
|
|
/* hw_free callback */
|
|
static int snd_ca0106_pcm_hw_free_capture(struct snd_pcm_substream *substream)
|
|
{
|
|
return snd_pcm_lib_free_pages(substream);
|
|
}
|
|
|
|
/* prepare playback callback */
|
|
static int snd_ca0106_pcm_prepare_playback(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_ca0106 *emu = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_ca0106_pcm *epcm = runtime->private_data;
|
|
int channel = epcm->channel_id;
|
|
u32 *table_base = (u32 *)(emu->buffer.area+(8*16*channel));
|
|
u32 period_size_bytes = frames_to_bytes(runtime, runtime->period_size);
|
|
u32 hcfg_mask = HCFG_PLAYBACK_S32_LE;
|
|
u32 hcfg_set = 0x00000000;
|
|
u32 hcfg;
|
|
u32 reg40_mask = 0x30000 << (channel<<1);
|
|
u32 reg40_set = 0;
|
|
u32 reg40;
|
|
/* FIXME: Depending on mixer selection of SPDIF out or not, select the spdif rate or the DAC rate. */
|
|
u32 reg71_mask = 0x03030000 ; /* Global. Set SPDIF rate. We only support 44100 to spdif, not to DAC. */
|
|
u32 reg71_set = 0;
|
|
u32 reg71;
|
|
int i;
|
|
|
|
#if 0 /* debug */
|
|
snd_printk(KERN_DEBUG
|
|
"prepare:channel_number=%d, rate=%d, format=0x%x, "
|
|
"channels=%d, buffer_size=%ld, period_size=%ld, "
|
|
"periods=%u, frames_to_bytes=%d\n",
|
|
channel, runtime->rate, runtime->format,
|
|
runtime->channels, runtime->buffer_size,
|
|
runtime->period_size, runtime->periods,
|
|
frames_to_bytes(runtime, 1));
|
|
snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, table_base=%p\n",
|
|
runtime->dma_addr, runtime->dma_area, table_base);
|
|
snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",
|
|
emu->buffer.addr, emu->buffer.area, emu->buffer.bytes);
|
|
#endif /* debug */
|
|
/* Rate can be set per channel. */
|
|
/* reg40 control host to fifo */
|
|
/* reg71 controls DAC rate. */
|
|
switch (runtime->rate) {
|
|
case 44100:
|
|
reg40_set = 0x10000 << (channel<<1);
|
|
reg71_set = 0x01010000;
|
|
break;
|
|
case 48000:
|
|
reg40_set = 0;
|
|
reg71_set = 0;
|
|
break;
|
|
case 96000:
|
|
reg40_set = 0x20000 << (channel<<1);
|
|
reg71_set = 0x02020000;
|
|
break;
|
|
case 192000:
|
|
reg40_set = 0x30000 << (channel<<1);
|
|
reg71_set = 0x03030000;
|
|
break;
|
|
default:
|
|
reg40_set = 0;
|
|
reg71_set = 0;
|
|
break;
|
|
}
|
|
/* Format is a global setting */
|
|
/* FIXME: Only let the first channel accessed set this. */
|
|
switch (runtime->format) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
hcfg_set = 0;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
hcfg_set = HCFG_PLAYBACK_S32_LE;
|
|
break;
|
|
default:
|
|
hcfg_set = 0;
|
|
break;
|
|
}
|
|
hcfg = inl(emu->port + HCFG) ;
|
|
hcfg = (hcfg & ~hcfg_mask) | hcfg_set;
|
|
outl(hcfg, emu->port + HCFG);
|
|
reg40 = snd_ca0106_ptr_read(emu, 0x40, 0);
|
|
reg40 = (reg40 & ~reg40_mask) | reg40_set;
|
|
snd_ca0106_ptr_write(emu, 0x40, 0, reg40);
|
|
reg71 = snd_ca0106_ptr_read(emu, 0x71, 0);
|
|
reg71 = (reg71 & ~reg71_mask) | reg71_set;
|
|
snd_ca0106_ptr_write(emu, 0x71, 0, reg71);
|
|
|
|
/* FIXME: Check emu->buffer.size before actually writing to it. */
|
|
for(i=0; i < runtime->periods; i++) {
|
|
table_base[i*2] = runtime->dma_addr + (i * period_size_bytes);
|
|
table_base[i*2+1] = period_size_bytes << 16;
|
|
}
|
|
|
|
snd_ca0106_ptr_write(emu, PLAYBACK_LIST_ADDR, channel, emu->buffer.addr+(8*16*channel));
|
|
snd_ca0106_ptr_write(emu, PLAYBACK_LIST_SIZE, channel, (runtime->periods - 1) << 19);
|
|
snd_ca0106_ptr_write(emu, PLAYBACK_LIST_PTR, channel, 0);
|
|
snd_ca0106_ptr_write(emu, PLAYBACK_DMA_ADDR, channel, runtime->dma_addr);
|
|
snd_ca0106_ptr_write(emu, PLAYBACK_PERIOD_SIZE, channel, frames_to_bytes(runtime, runtime->period_size)<<16); // buffer size in bytes
|
|
/* FIXME test what 0 bytes does. */
|
|
snd_ca0106_ptr_write(emu, PLAYBACK_PERIOD_SIZE, channel, 0); // buffer size in bytes
|
|
snd_ca0106_ptr_write(emu, PLAYBACK_POINTER, channel, 0);
|
|
snd_ca0106_ptr_write(emu, 0x07, channel, 0x0);
|
|
snd_ca0106_ptr_write(emu, 0x08, channel, 0);
|
|
snd_ca0106_ptr_write(emu, PLAYBACK_MUTE, 0x0, 0x0); /* Unmute output */
|
|
#if 0
|
|
snd_ca0106_ptr_write(emu, SPCS0, 0,
|
|
SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
|
|
SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
|
|
SPCS_GENERATIONSTATUS | 0x00001200 |
|
|
0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT );
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* prepare capture callback */
|
|
static int snd_ca0106_pcm_prepare_capture(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_ca0106 *emu = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_ca0106_pcm *epcm = runtime->private_data;
|
|
int channel = epcm->channel_id;
|
|
u32 hcfg_mask = HCFG_CAPTURE_S32_LE;
|
|
u32 hcfg_set = 0x00000000;
|
|
u32 hcfg;
|
|
u32 over_sampling=0x2;
|
|
u32 reg71_mask = 0x0000c000 ; /* Global. Set ADC rate. */
|
|
u32 reg71_set = 0;
|
|
u32 reg71;
|
|
|
|
#if 0 /* debug */
|
|
snd_printk(KERN_DEBUG
|
|
"prepare:channel_number=%d, rate=%d, format=0x%x, "
|
|
"channels=%d, buffer_size=%ld, period_size=%ld, "
|
|
"periods=%u, frames_to_bytes=%d\n",
|
|
channel, runtime->rate, runtime->format,
|
|
runtime->channels, runtime->buffer_size,
|
|
runtime->period_size, runtime->periods,
|
|
frames_to_bytes(runtime, 1));
|
|
snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, table_base=%p\n",
|
|
runtime->dma_addr, runtime->dma_area, table_base);
|
|
snd_printk(KERN_DEBUG "dma_addr=%x, dma_area=%p, dma_bytes(size)=%x\n",
|
|
emu->buffer.addr, emu->buffer.area, emu->buffer.bytes);
|
|
#endif /* debug */
|
|
/* reg71 controls ADC rate. */
|
|
switch (runtime->rate) {
|
|
case 44100:
|
|
reg71_set = 0x00004000;
|
|
break;
|
|
case 48000:
|
|
reg71_set = 0;
|
|
break;
|
|
case 96000:
|
|
reg71_set = 0x00008000;
|
|
over_sampling=0xa;
|
|
break;
|
|
case 192000:
|
|
reg71_set = 0x0000c000;
|
|
over_sampling=0xa;
|
|
break;
|
|
default:
|
|
reg71_set = 0;
|
|
break;
|
|
}
|
|
/* Format is a global setting */
|
|
/* FIXME: Only let the first channel accessed set this. */
|
|
switch (runtime->format) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
hcfg_set = 0;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
hcfg_set = HCFG_CAPTURE_S32_LE;
|
|
break;
|
|
default:
|
|
hcfg_set = 0;
|
|
break;
|
|
}
|
|
hcfg = inl(emu->port + HCFG) ;
|
|
hcfg = (hcfg & ~hcfg_mask) | hcfg_set;
|
|
outl(hcfg, emu->port + HCFG);
|
|
reg71 = snd_ca0106_ptr_read(emu, 0x71, 0);
|
|
reg71 = (reg71 & ~reg71_mask) | reg71_set;
|
|
snd_ca0106_ptr_write(emu, 0x71, 0, reg71);
|
|
if (emu->details->i2c_adc == 1) { /* The SB0410 and SB0413 use I2C to control ADC. */
|
|
snd_ca0106_i2c_write(emu, ADC_MASTER, over_sampling); /* Adjust the over sampler to better suit the capture rate. */
|
|
}
|
|
|
|
|
|
/*
|
|
printk(KERN_DEBUG
|
|
"prepare:channel_number=%d, rate=%d, format=0x%x, channels=%d, "
|
|
"buffer_size=%ld, period_size=%ld, frames_to_bytes=%d\n",
|
|
channel, runtime->rate, runtime->format, runtime->channels,
|
|
runtime->buffer_size, runtime->period_size,
|
|
frames_to_bytes(runtime, 1));
|
|
*/
|
|
snd_ca0106_ptr_write(emu, 0x13, channel, 0);
|
|
snd_ca0106_ptr_write(emu, CAPTURE_DMA_ADDR, channel, runtime->dma_addr);
|
|
snd_ca0106_ptr_write(emu, CAPTURE_BUFFER_SIZE, channel, frames_to_bytes(runtime, runtime->buffer_size)<<16); // buffer size in bytes
|
|
snd_ca0106_ptr_write(emu, CAPTURE_POINTER, channel, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* trigger_playback callback */
|
|
static int snd_ca0106_pcm_trigger_playback(struct snd_pcm_substream *substream,
|
|
int cmd)
|
|
{
|
|
struct snd_ca0106 *emu = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime;
|
|
struct snd_ca0106_pcm *epcm;
|
|
int channel;
|
|
int result = 0;
|
|
struct snd_pcm_substream *s;
|
|
u32 basic = 0;
|
|
u32 extended = 0;
|
|
u32 bits;
|
|
int running = 0;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
running = 1;
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
default:
|
|
running = 0;
|
|
break;
|
|
}
|
|
snd_pcm_group_for_each_entry(s, substream) {
|
|
if (snd_pcm_substream_chip(s) != emu ||
|
|
s->stream != SNDRV_PCM_STREAM_PLAYBACK)
|
|
continue;
|
|
runtime = s->runtime;
|
|
epcm = runtime->private_data;
|
|
channel = epcm->channel_id;
|
|
/* snd_printk(KERN_DEBUG "channel=%d\n", channel); */
|
|
epcm->running = running;
|
|
basic |= (0x1 << channel);
|
|
extended |= (0x10 << channel);
|
|
snd_pcm_trigger_done(s, substream);
|
|
}
|
|
/* snd_printk(KERN_DEBUG "basic=0x%x, extended=0x%x\n",basic, extended); */
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
bits = snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0);
|
|
bits |= extended;
|
|
snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, bits);
|
|
bits = snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0);
|
|
bits |= basic;
|
|
snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, bits);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
bits = snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0);
|
|
bits &= ~basic;
|
|
snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, bits);
|
|
bits = snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0);
|
|
bits &= ~extended;
|
|
snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, bits);
|
|
break;
|
|
default:
|
|
result = -EINVAL;
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
/* trigger_capture callback */
|
|
static int snd_ca0106_pcm_trigger_capture(struct snd_pcm_substream *substream,
|
|
int cmd)
|
|
{
|
|
struct snd_ca0106 *emu = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_ca0106_pcm *epcm = runtime->private_data;
|
|
int channel = epcm->channel_id;
|
|
int result = 0;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0) | (0x110000<<channel));
|
|
snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0)|(0x100<<channel));
|
|
epcm->running = 1;
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
snd_ca0106_ptr_write(emu, BASIC_INTERRUPT, 0, snd_ca0106_ptr_read(emu, BASIC_INTERRUPT, 0) & ~(0x100<<channel));
|
|
snd_ca0106_ptr_write(emu, EXTENDED_INT_MASK, 0, snd_ca0106_ptr_read(emu, EXTENDED_INT_MASK, 0) & ~(0x110000<<channel));
|
|
epcm->running = 0;
|
|
break;
|
|
default:
|
|
result = -EINVAL;
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
/* pointer_playback callback */
|
|
static snd_pcm_uframes_t
|
|
snd_ca0106_pcm_pointer_playback(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_ca0106 *emu = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_ca0106_pcm *epcm = runtime->private_data;
|
|
unsigned int ptr, prev_ptr;
|
|
int channel = epcm->channel_id;
|
|
int timeout = 10;
|
|
|
|
if (!epcm->running)
|
|
return 0;
|
|
|
|
prev_ptr = -1;
|
|
do {
|
|
ptr = snd_ca0106_ptr_read(emu, PLAYBACK_LIST_PTR, channel);
|
|
ptr = (ptr >> 3) * runtime->period_size;
|
|
ptr += bytes_to_frames(runtime,
|
|
snd_ca0106_ptr_read(emu, PLAYBACK_POINTER, channel));
|
|
if (ptr >= runtime->buffer_size)
|
|
ptr -= runtime->buffer_size;
|
|
if (prev_ptr == ptr)
|
|
return ptr;
|
|
prev_ptr = ptr;
|
|
} while (--timeout);
|
|
snd_printk(KERN_WARNING "ca0106: unstable DMA pointer!\n");
|
|
return 0;
|
|
}
|
|
|
|
/* pointer_capture callback */
|
|
static snd_pcm_uframes_t
|
|
snd_ca0106_pcm_pointer_capture(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_ca0106 *emu = snd_pcm_substream_chip(substream);
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
struct snd_ca0106_pcm *epcm = runtime->private_data;
|
|
snd_pcm_uframes_t ptr, ptr1, ptr2 = 0;
|
|
int channel = epcm->channel_id;
|
|
|
|
if (!epcm->running)
|
|
return 0;
|
|
|
|
ptr1 = snd_ca0106_ptr_read(emu, CAPTURE_POINTER, channel);
|
|
ptr2 = bytes_to_frames(runtime, ptr1);
|
|
ptr=ptr2;
|
|
if (ptr >= runtime->buffer_size)
|
|
ptr -= runtime->buffer_size;
|
|
/*
|
|
printk(KERN_DEBUG "ptr1 = 0x%lx, ptr2=0x%lx, ptr=0x%lx, "
|
|
"buffer_size = 0x%x, period_size = 0x%x, bits=%d, rate=%d\n",
|
|
ptr1, ptr2, ptr, (int)runtime->buffer_size,
|
|
(int)runtime->period_size, (int)runtime->frame_bits,
|
|
(int)runtime->rate);
|
|
*/
|
|
return ptr;
|
|
}
|
|
|
|
/* operators */
|
|
static struct snd_pcm_ops snd_ca0106_playback_front_ops = {
|
|
.open = snd_ca0106_pcm_open_playback_front,
|
|
.close = snd_ca0106_pcm_close_playback,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_ca0106_pcm_hw_params_playback,
|
|
.hw_free = snd_ca0106_pcm_hw_free_playback,
|
|
.prepare = snd_ca0106_pcm_prepare_playback,
|
|
.trigger = snd_ca0106_pcm_trigger_playback,
|
|
.pointer = snd_ca0106_pcm_pointer_playback,
|
|
};
|
|
|
|
static struct snd_pcm_ops snd_ca0106_capture_0_ops = {
|
|
.open = snd_ca0106_pcm_open_0_capture,
|
|
.close = snd_ca0106_pcm_close_capture,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_ca0106_pcm_hw_params_capture,
|
|
.hw_free = snd_ca0106_pcm_hw_free_capture,
|
|
.prepare = snd_ca0106_pcm_prepare_capture,
|
|
.trigger = snd_ca0106_pcm_trigger_capture,
|
|
.pointer = snd_ca0106_pcm_pointer_capture,
|
|
};
|
|
|
|
static struct snd_pcm_ops snd_ca0106_capture_1_ops = {
|
|
.open = snd_ca0106_pcm_open_1_capture,
|
|
.close = snd_ca0106_pcm_close_capture,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_ca0106_pcm_hw_params_capture,
|
|
.hw_free = snd_ca0106_pcm_hw_free_capture,
|
|
.prepare = snd_ca0106_pcm_prepare_capture,
|
|
.trigger = snd_ca0106_pcm_trigger_capture,
|
|
.pointer = snd_ca0106_pcm_pointer_capture,
|
|
};
|
|
|
|
static struct snd_pcm_ops snd_ca0106_capture_2_ops = {
|
|
.open = snd_ca0106_pcm_open_2_capture,
|
|
.close = snd_ca0106_pcm_close_capture,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_ca0106_pcm_hw_params_capture,
|
|
.hw_free = snd_ca0106_pcm_hw_free_capture,
|
|
.prepare = snd_ca0106_pcm_prepare_capture,
|
|
.trigger = snd_ca0106_pcm_trigger_capture,
|
|
.pointer = snd_ca0106_pcm_pointer_capture,
|
|
};
|
|
|
|
static struct snd_pcm_ops snd_ca0106_capture_3_ops = {
|
|
.open = snd_ca0106_pcm_open_3_capture,
|
|
.close = snd_ca0106_pcm_close_capture,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_ca0106_pcm_hw_params_capture,
|
|
.hw_free = snd_ca0106_pcm_hw_free_capture,
|
|
.prepare = snd_ca0106_pcm_prepare_capture,
|
|
.trigger = snd_ca0106_pcm_trigger_capture,
|
|
.pointer = snd_ca0106_pcm_pointer_capture,
|
|
};
|
|
|
|
static struct snd_pcm_ops snd_ca0106_playback_center_lfe_ops = {
|
|
.open = snd_ca0106_pcm_open_playback_center_lfe,
|
|
.close = snd_ca0106_pcm_close_playback,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_ca0106_pcm_hw_params_playback,
|
|
.hw_free = snd_ca0106_pcm_hw_free_playback,
|
|
.prepare = snd_ca0106_pcm_prepare_playback,
|
|
.trigger = snd_ca0106_pcm_trigger_playback,
|
|
.pointer = snd_ca0106_pcm_pointer_playback,
|
|
};
|
|
|
|
static struct snd_pcm_ops snd_ca0106_playback_unknown_ops = {
|
|
.open = snd_ca0106_pcm_open_playback_unknown,
|
|
.close = snd_ca0106_pcm_close_playback,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_ca0106_pcm_hw_params_playback,
|
|
.hw_free = snd_ca0106_pcm_hw_free_playback,
|
|
.prepare = snd_ca0106_pcm_prepare_playback,
|
|
.trigger = snd_ca0106_pcm_trigger_playback,
|
|
.pointer = snd_ca0106_pcm_pointer_playback,
|
|
};
|
|
|
|
static struct snd_pcm_ops snd_ca0106_playback_rear_ops = {
|
|
.open = snd_ca0106_pcm_open_playback_rear,
|
|
.close = snd_ca0106_pcm_close_playback,
|
|
.ioctl = snd_pcm_lib_ioctl,
|
|
.hw_params = snd_ca0106_pcm_hw_params_playback,
|
|
.hw_free = snd_ca0106_pcm_hw_free_playback,
|
|
.prepare = snd_ca0106_pcm_prepare_playback,
|
|
.trigger = snd_ca0106_pcm_trigger_playback,
|
|
.pointer = snd_ca0106_pcm_pointer_playback,
|
|
};
|
|
|
|
|
|
static unsigned short snd_ca0106_ac97_read(struct snd_ac97 *ac97,
|
|
unsigned short reg)
|
|
{
|
|
struct snd_ca0106 *emu = ac97->private_data;
|
|
unsigned long flags;
|
|
unsigned short val;
|
|
|
|
spin_lock_irqsave(&emu->emu_lock, flags);
|
|
outb(reg, emu->port + AC97ADDRESS);
|
|
val = inw(emu->port + AC97DATA);
|
|
spin_unlock_irqrestore(&emu->emu_lock, flags);
|
|
return val;
|
|
}
|
|
|
|
static void snd_ca0106_ac97_write(struct snd_ac97 *ac97,
|
|
unsigned short reg, unsigned short val)
|
|
{
|
|
struct snd_ca0106 *emu = ac97->private_data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&emu->emu_lock, flags);
|
|
outb(reg, emu->port + AC97ADDRESS);
|
|
outw(val, emu->port + AC97DATA);
|
|
spin_unlock_irqrestore(&emu->emu_lock, flags);
|
|
}
|
|
|
|
static int snd_ca0106_ac97(struct snd_ca0106 *chip)
|
|
{
|
|
struct snd_ac97_bus *pbus;
|
|
struct snd_ac97_template ac97;
|
|
int err;
|
|
static struct snd_ac97_bus_ops ops = {
|
|
.write = snd_ca0106_ac97_write,
|
|
.read = snd_ca0106_ac97_read,
|
|
};
|
|
|
|
if ((err = snd_ac97_bus(chip->card, 0, &ops, NULL, &pbus)) < 0)
|
|
return err;
|
|
pbus->no_vra = 1; /* we don't need VRA */
|
|
|
|
memset(&ac97, 0, sizeof(ac97));
|
|
ac97.private_data = chip;
|
|
ac97.scaps = AC97_SCAP_NO_SPDIF;
|
|
return snd_ac97_mixer(pbus, &ac97, &chip->ac97);
|
|
}
|
|
|
|
static void ca0106_stop_chip(struct snd_ca0106 *chip);
|
|
|
|
static int snd_ca0106_free(struct snd_ca0106 *chip)
|
|
{
|
|
if (chip->res_port != NULL) {
|
|
/* avoid access to already used hardware */
|
|
ca0106_stop_chip(chip);
|
|
}
|
|
if (chip->irq >= 0)
|
|
free_irq(chip->irq, chip);
|
|
// release the data
|
|
#if 1
|
|
if (chip->buffer.area)
|
|
snd_dma_free_pages(&chip->buffer);
|
|
#endif
|
|
|
|
// release the i/o port
|
|
release_and_free_resource(chip->res_port);
|
|
|
|
pci_disable_device(chip->pci);
|
|
kfree(chip);
|
|
return 0;
|
|
}
|
|
|
|
static int snd_ca0106_dev_free(struct snd_device *device)
|
|
{
|
|
struct snd_ca0106 *chip = device->device_data;
|
|
return snd_ca0106_free(chip);
|
|
}
|
|
|
|
static irqreturn_t snd_ca0106_interrupt(int irq, void *dev_id)
|
|
{
|
|
unsigned int status;
|
|
|
|
struct snd_ca0106 *chip = dev_id;
|
|
int i;
|
|
int mask;
|
|
unsigned int stat76;
|
|
struct snd_ca0106_channel *pchannel;
|
|
|
|
status = inl(chip->port + IPR);
|
|
if (! status)
|
|
return IRQ_NONE;
|
|
|
|
stat76 = snd_ca0106_ptr_read(chip, EXTENDED_INT, 0);
|
|
/*
|
|
snd_printk(KERN_DEBUG "interrupt status = 0x%08x, stat76=0x%08x\n",
|
|
status, stat76);
|
|
snd_printk(KERN_DEBUG "ptr=0x%08x\n",
|
|
snd_ca0106_ptr_read(chip, PLAYBACK_POINTER, 0));
|
|
*/
|
|
mask = 0x11; /* 0x1 for one half, 0x10 for the other half period. */
|
|
for(i = 0; i < 4; i++) {
|
|
pchannel = &(chip->playback_channels[i]);
|
|
if (stat76 & mask) {
|
|
/* FIXME: Select the correct substream for period elapsed */
|
|
if(pchannel->use) {
|
|
snd_pcm_period_elapsed(pchannel->epcm->substream);
|
|
//printk(KERN_INFO "interrupt [%d] used\n", i);
|
|
}
|
|
}
|
|
//printk(KERN_INFO "channel=%p\n",pchannel);
|
|
//printk(KERN_INFO "interrupt stat76[%d] = %08x, use=%d, channel=%d\n", i, stat76, pchannel->use, pchannel->number);
|
|
mask <<= 1;
|
|
}
|
|
mask = 0x110000; /* 0x1 for one half, 0x10 for the other half period. */
|
|
for(i = 0; i < 4; i++) {
|
|
pchannel = &(chip->capture_channels[i]);
|
|
if (stat76 & mask) {
|
|
/* FIXME: Select the correct substream for period elapsed */
|
|
if(pchannel->use) {
|
|
snd_pcm_period_elapsed(pchannel->epcm->substream);
|
|
//printk(KERN_INFO "interrupt [%d] used\n", i);
|
|
}
|
|
}
|
|
//printk(KERN_INFO "channel=%p\n",pchannel);
|
|
//printk(KERN_INFO "interrupt stat76[%d] = %08x, use=%d, channel=%d\n", i, stat76, pchannel->use, pchannel->number);
|
|
mask <<= 1;
|
|
}
|
|
|
|
snd_ca0106_ptr_write(chip, EXTENDED_INT, 0, stat76);
|
|
|
|
if (chip->midi.dev_id &&
|
|
(status & (chip->midi.ipr_tx|chip->midi.ipr_rx))) {
|
|
if (chip->midi.interrupt)
|
|
chip->midi.interrupt(&chip->midi, status);
|
|
else
|
|
chip->midi.interrupt_disable(&chip->midi, chip->midi.tx_enable | chip->midi.rx_enable);
|
|
}
|
|
|
|
// acknowledge the interrupt if necessary
|
|
outl(status, chip->port+IPR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct snd_pcm_chmap_elem surround_map[] = {
|
|
{ .channels = 2,
|
|
.map = { SNDRV_CHMAP_RL, SNDRV_CHMAP_RR } },
|
|
{ }
|
|
};
|
|
|
|
static const struct snd_pcm_chmap_elem clfe_map[] = {
|
|
{ .channels = 2,
|
|
.map = { SNDRV_CHMAP_FC, SNDRV_CHMAP_LFE } },
|
|
{ }
|
|
};
|
|
|
|
static const struct snd_pcm_chmap_elem side_map[] = {
|
|
{ .channels = 2,
|
|
.map = { SNDRV_CHMAP_SL, SNDRV_CHMAP_SR } },
|
|
{ }
|
|
};
|
|
|
|
static int snd_ca0106_pcm(struct snd_ca0106 *emu, int device)
|
|
{
|
|
struct snd_pcm *pcm;
|
|
struct snd_pcm_substream *substream;
|
|
const struct snd_pcm_chmap_elem *map = NULL;
|
|
int err;
|
|
|
|
err = snd_pcm_new(emu->card, "ca0106", device, 1, 1, &pcm);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
pcm->private_data = emu;
|
|
|
|
switch (device) {
|
|
case 0:
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ca0106_playback_front_ops);
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ca0106_capture_0_ops);
|
|
map = snd_pcm_std_chmaps;
|
|
break;
|
|
case 1:
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ca0106_playback_rear_ops);
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ca0106_capture_1_ops);
|
|
map = surround_map;
|
|
break;
|
|
case 2:
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ca0106_playback_center_lfe_ops);
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ca0106_capture_2_ops);
|
|
map = clfe_map;
|
|
break;
|
|
case 3:
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, &snd_ca0106_playback_unknown_ops);
|
|
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_ca0106_capture_3_ops);
|
|
map = side_map;
|
|
break;
|
|
}
|
|
|
|
pcm->info_flags = 0;
|
|
strcpy(pcm->name, "CA0106");
|
|
|
|
for(substream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream;
|
|
substream;
|
|
substream = substream->next) {
|
|
if ((err = snd_pcm_lib_preallocate_pages(substream,
|
|
SNDRV_DMA_TYPE_DEV,
|
|
snd_dma_pci_data(emu->pci),
|
|
64*1024, 64*1024)) < 0) /* FIXME: 32*1024 for sound buffer, between 32and64 for Periods table. */
|
|
return err;
|
|
}
|
|
|
|
for (substream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream;
|
|
substream;
|
|
substream = substream->next) {
|
|
if ((err = snd_pcm_lib_preallocate_pages(substream,
|
|
SNDRV_DMA_TYPE_DEV,
|
|
snd_dma_pci_data(emu->pci),
|
|
64*1024, 64*1024)) < 0)
|
|
return err;
|
|
}
|
|
|
|
err = snd_pcm_add_chmap_ctls(pcm, SNDRV_PCM_STREAM_PLAYBACK, map, 2,
|
|
1 << 2, NULL);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
emu->pcm[device] = pcm;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define SPI_REG(reg, value) (((reg) << SPI_REG_SHIFT) | (value))
|
|
static unsigned int spi_dac_init[] = {
|
|
SPI_REG(SPI_LDA1_REG, SPI_DA_BIT_0dB), /* 0dB dig. attenuation */
|
|
SPI_REG(SPI_RDA1_REG, SPI_DA_BIT_0dB),
|
|
SPI_REG(SPI_PL_REG, SPI_PL_BIT_L_L | SPI_PL_BIT_R_R | SPI_IZD_BIT),
|
|
SPI_REG(SPI_FMT_REG, SPI_FMT_BIT_I2S | SPI_IWL_BIT_24),
|
|
SPI_REG(SPI_LDA2_REG, SPI_DA_BIT_0dB),
|
|
SPI_REG(SPI_RDA2_REG, SPI_DA_BIT_0dB),
|
|
SPI_REG(SPI_LDA3_REG, SPI_DA_BIT_0dB),
|
|
SPI_REG(SPI_RDA3_REG, SPI_DA_BIT_0dB),
|
|
SPI_REG(SPI_MASTDA_REG, SPI_DA_BIT_0dB),
|
|
SPI_REG(9, 0x00),
|
|
SPI_REG(SPI_MS_REG, SPI_DACD0_BIT | SPI_DACD1_BIT | SPI_DACD2_BIT),
|
|
SPI_REG(12, 0x00),
|
|
SPI_REG(SPI_LDA4_REG, SPI_DA_BIT_0dB),
|
|
SPI_REG(SPI_RDA4_REG, SPI_DA_BIT_0dB | SPI_DA_BIT_UPDATE),
|
|
SPI_REG(SPI_DACD4_REG, SPI_DACD4_BIT),
|
|
};
|
|
|
|
static unsigned int i2c_adc_init[][2] = {
|
|
{ 0x17, 0x00 }, /* Reset */
|
|
{ 0x07, 0x00 }, /* Timeout */
|
|
{ 0x0b, 0x22 }, /* Interface control */
|
|
{ 0x0c, 0x22 }, /* Master mode control */
|
|
{ 0x0d, 0x08 }, /* Powerdown control */
|
|
{ 0x0e, 0xcf }, /* Attenuation Left 0x01 = -103dB, 0xff = 24dB */
|
|
{ 0x0f, 0xcf }, /* Attenuation Right 0.5dB steps */
|
|
{ 0x10, 0x7b }, /* ALC Control 1 */
|
|
{ 0x11, 0x00 }, /* ALC Control 2 */
|
|
{ 0x12, 0x32 }, /* ALC Control 3 */
|
|
{ 0x13, 0x00 }, /* Noise gate control */
|
|
{ 0x14, 0xa6 }, /* Limiter control */
|
|
{ 0x15, ADC_MUX_LINEIN }, /* ADC Mixer control */
|
|
};
|
|
|
|
static void ca0106_init_chip(struct snd_ca0106 *chip, int resume)
|
|
{
|
|
int ch;
|
|
unsigned int def_bits;
|
|
|
|
outl(0, chip->port + INTE);
|
|
|
|
/*
|
|
* Init to 0x02109204 :
|
|
* Clock accuracy = 0 (1000ppm)
|
|
* Sample Rate = 2 (48kHz)
|
|
* Audio Channel = 1 (Left of 2)
|
|
* Source Number = 0 (Unspecified)
|
|
* Generation Status = 1 (Original for Cat Code 12)
|
|
* Cat Code = 12 (Digital Signal Mixer)
|
|
* Mode = 0 (Mode 0)
|
|
* Emphasis = 0 (None)
|
|
* CP = 1 (Copyright unasserted)
|
|
* AN = 0 (Audio data)
|
|
* P = 0 (Consumer)
|
|
*/
|
|
def_bits =
|
|
SPCS_CLKACCY_1000PPM | SPCS_SAMPLERATE_48 |
|
|
SPCS_CHANNELNUM_LEFT | SPCS_SOURCENUM_UNSPEC |
|
|
SPCS_GENERATIONSTATUS | 0x00001200 |
|
|
0x00000000 | SPCS_EMPHASIS_NONE | SPCS_COPYRIGHT;
|
|
if (!resume) {
|
|
chip->spdif_str_bits[0] = chip->spdif_bits[0] = def_bits;
|
|
chip->spdif_str_bits[1] = chip->spdif_bits[1] = def_bits;
|
|
chip->spdif_str_bits[2] = chip->spdif_bits[2] = def_bits;
|
|
chip->spdif_str_bits[3] = chip->spdif_bits[3] = def_bits;
|
|
}
|
|
/* Only SPCS1 has been tested */
|
|
snd_ca0106_ptr_write(chip, SPCS1, 0, chip->spdif_str_bits[1]);
|
|
snd_ca0106_ptr_write(chip, SPCS0, 0, chip->spdif_str_bits[0]);
|
|
snd_ca0106_ptr_write(chip, SPCS2, 0, chip->spdif_str_bits[2]);
|
|
snd_ca0106_ptr_write(chip, SPCS3, 0, chip->spdif_str_bits[3]);
|
|
|
|
snd_ca0106_ptr_write(chip, PLAYBACK_MUTE, 0, 0x00fc0000);
|
|
snd_ca0106_ptr_write(chip, CAPTURE_MUTE, 0, 0x00fc0000);
|
|
|
|
/* Write 0x8000 to AC97_REC_GAIN to mute it. */
|
|
outb(AC97_REC_GAIN, chip->port + AC97ADDRESS);
|
|
outw(0x8000, chip->port + AC97DATA);
|
|
#if 0 /* FIXME: what are these? */
|
|
snd_ca0106_ptr_write(chip, SPCS0, 0, 0x2108006);
|
|
snd_ca0106_ptr_write(chip, 0x42, 0, 0x2108006);
|
|
snd_ca0106_ptr_write(chip, 0x43, 0, 0x2108006);
|
|
snd_ca0106_ptr_write(chip, 0x44, 0, 0x2108006);
|
|
#endif
|
|
|
|
/* OSS drivers set this. */
|
|
/* snd_ca0106_ptr_write(chip, SPDIF_SELECT2, 0, 0xf0f003f); */
|
|
|
|
/* Analog or Digital output */
|
|
snd_ca0106_ptr_write(chip, SPDIF_SELECT1, 0, 0xf);
|
|
/* 0x0b000000 for digital, 0x000b0000 for analog, from win2000 drivers.
|
|
* Use 0x000f0000 for surround71
|
|
*/
|
|
snd_ca0106_ptr_write(chip, SPDIF_SELECT2, 0, 0x000f0000);
|
|
|
|
chip->spdif_enable = 0; /* Set digital SPDIF output off */
|
|
/*snd_ca0106_ptr_write(chip, 0x45, 0, 0);*/ /* Analogue out */
|
|
/*snd_ca0106_ptr_write(chip, 0x45, 0, 0xf00);*/ /* Digital out */
|
|
|
|
/* goes to 0x40c80000 when doing SPDIF IN/OUT */
|
|
snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 0, 0x40c81000);
|
|
/* (Mute) CAPTURE feedback into PLAYBACK volume.
|
|
* Only lower 16 bits matter.
|
|
*/
|
|
snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 1, 0xffffffff);
|
|
/* SPDIF IN Volume */
|
|
snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 2, 0x30300000);
|
|
/* SPDIF IN Volume, 0x70 = (vol & 0x3f) | 0x40 */
|
|
snd_ca0106_ptr_write(chip, CAPTURE_CONTROL, 3, 0x00700000);
|
|
|
|
snd_ca0106_ptr_write(chip, PLAYBACK_ROUTING1, 0, 0x32765410);
|
|
snd_ca0106_ptr_write(chip, PLAYBACK_ROUTING2, 0, 0x76767676);
|
|
snd_ca0106_ptr_write(chip, CAPTURE_ROUTING1, 0, 0x32765410);
|
|
snd_ca0106_ptr_write(chip, CAPTURE_ROUTING2, 0, 0x76767676);
|
|
|
|
for (ch = 0; ch < 4; ch++) {
|
|
/* Only high 16 bits matter */
|
|
snd_ca0106_ptr_write(chip, CAPTURE_VOLUME1, ch, 0x30303030);
|
|
snd_ca0106_ptr_write(chip, CAPTURE_VOLUME2, ch, 0x30303030);
|
|
#if 0 /* Mute */
|
|
snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME1, ch, 0x40404040);
|
|
snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME2, ch, 0x40404040);
|
|
snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME1, ch, 0xffffffff);
|
|
snd_ca0106_ptr_write(chip, PLAYBACK_VOLUME2, ch, 0xffffffff);
|
|
#endif
|
|
}
|
|
if (chip->details->i2c_adc == 1) {
|
|
/* Select MIC, Line in, TAD in, AUX in */
|
|
snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x333300e4);
|
|
/* Default to CAPTURE_SOURCE to i2s in */
|
|
if (!resume)
|
|
chip->capture_source = 3;
|
|
} else if (chip->details->ac97 == 1) {
|
|
/* Default to AC97 in */
|
|
snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x444400e4);
|
|
/* Default to CAPTURE_SOURCE to AC97 in */
|
|
if (!resume)
|
|
chip->capture_source = 4;
|
|
} else {
|
|
/* Select MIC, Line in, TAD in, AUX in */
|
|
snd_ca0106_ptr_write(chip, CAPTURE_SOURCE, 0x0, 0x333300e4);
|
|
/* Default to Set CAPTURE_SOURCE to i2s in */
|
|
if (!resume)
|
|
chip->capture_source = 3;
|
|
}
|
|
|
|
if (chip->details->gpio_type == 2) {
|
|
/* The SB0438 use GPIO differently. */
|
|
/* FIXME: Still need to find out what the other GPIO bits do.
|
|
* E.g. For digital spdif out.
|
|
*/
|
|
outl(0x0, chip->port+GPIO);
|
|
/* outl(0x00f0e000, chip->port+GPIO); */ /* Analog */
|
|
outl(0x005f5301, chip->port+GPIO); /* Analog */
|
|
} else if (chip->details->gpio_type == 1) {
|
|
/* The SB0410 and SB0413 use GPIO differently. */
|
|
/* FIXME: Still need to find out what the other GPIO bits do.
|
|
* E.g. For digital spdif out.
|
|
*/
|
|
outl(0x0, chip->port+GPIO);
|
|
/* outl(0x00f0e000, chip->port+GPIO); */ /* Analog */
|
|
outl(0x005f5301, chip->port+GPIO); /* Analog */
|
|
} else {
|
|
outl(0x0, chip->port+GPIO);
|
|
outl(0x005f03a3, chip->port+GPIO); /* Analog */
|
|
/* outl(0x005f02a2, chip->port+GPIO); */ /* SPDIF */
|
|
}
|
|
snd_ca0106_intr_enable(chip, 0x105); /* Win2000 uses 0x1e0 */
|
|
|
|
/* outl(HCFG_LOCKSOUNDCACHE|HCFG_AUDIOENABLE, chip->port+HCFG); */
|
|
/* 0x1000 causes AC3 to fails. Maybe it effects 24 bit output. */
|
|
/* outl(0x00001409, chip->port+HCFG); */
|
|
/* outl(0x00000009, chip->port+HCFG); */
|
|
/* AC97 2.0, Enable outputs. */
|
|
outl(HCFG_AC97 | HCFG_AUDIOENABLE, chip->port+HCFG);
|
|
|
|
if (chip->details->i2c_adc == 1) {
|
|
/* The SB0410 and SB0413 use I2C to control ADC. */
|
|
int size, n;
|
|
|
|
size = ARRAY_SIZE(i2c_adc_init);
|
|
/* snd_printk(KERN_DEBUG "I2C:array size=0x%x\n", size); */
|
|
for (n = 0; n < size; n++)
|
|
snd_ca0106_i2c_write(chip, i2c_adc_init[n][0],
|
|
i2c_adc_init[n][1]);
|
|
for (n = 0; n < 4; n++) {
|
|
chip->i2c_capture_volume[n][0] = 0xcf;
|
|
chip->i2c_capture_volume[n][1] = 0xcf;
|
|
}
|
|
chip->i2c_capture_source = 2; /* Line in */
|
|
/* Enable Line-in capture. MIC in currently untested. */
|
|
/* snd_ca0106_i2c_write(chip, ADC_MUX, ADC_MUX_LINEIN); */
|
|
}
|
|
|
|
if (chip->details->spi_dac) {
|
|
/* The SB0570 use SPI to control DAC. */
|
|
int size, n;
|
|
|
|
size = ARRAY_SIZE(spi_dac_init);
|
|
for (n = 0; n < size; n++) {
|
|
int reg = spi_dac_init[n] >> SPI_REG_SHIFT;
|
|
|
|
snd_ca0106_spi_write(chip, spi_dac_init[n]);
|
|
if (reg < ARRAY_SIZE(chip->spi_dac_reg))
|
|
chip->spi_dac_reg[reg] = spi_dac_init[n];
|
|
}
|
|
|
|
/* Enable front dac only */
|
|
snd_ca0106_pcm_power_dac(chip, PCM_FRONT_CHANNEL, 1);
|
|
}
|
|
}
|
|
|
|
static void ca0106_stop_chip(struct snd_ca0106 *chip)
|
|
{
|
|
/* disable interrupts */
|
|
snd_ca0106_ptr_write(chip, BASIC_INTERRUPT, 0, 0);
|
|
outl(0, chip->port + INTE);
|
|
snd_ca0106_ptr_write(chip, EXTENDED_INT_MASK, 0, 0);
|
|
udelay(1000);
|
|
/* disable audio */
|
|
/* outl(HCFG_LOCKSOUNDCACHE, chip->port + HCFG); */
|
|
outl(0, chip->port + HCFG);
|
|
/* FIXME: We need to stop and DMA transfers here.
|
|
* But as I am not sure how yet, we cannot from the dma pages.
|
|
* So we can fix: snd-malloc: Memory leak? pages not freed = 8
|
|
*/
|
|
}
|
|
|
|
static int snd_ca0106_create(int dev, struct snd_card *card,
|
|
struct pci_dev *pci,
|
|
struct snd_ca0106 **rchip)
|
|
{
|
|
struct snd_ca0106 *chip;
|
|
struct snd_ca0106_details *c;
|
|
int err;
|
|
static struct snd_device_ops ops = {
|
|
.dev_free = snd_ca0106_dev_free,
|
|
};
|
|
|
|
*rchip = NULL;
|
|
|
|
err = pci_enable_device(pci);
|
|
if (err < 0)
|
|
return err;
|
|
if (pci_set_dma_mask(pci, DMA_BIT_MASK(32)) < 0 ||
|
|
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32)) < 0) {
|
|
printk(KERN_ERR "error to set 32bit mask DMA\n");
|
|
pci_disable_device(pci);
|
|
return -ENXIO;
|
|
}
|
|
|
|
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
|
|
if (chip == NULL) {
|
|
pci_disable_device(pci);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
chip->card = card;
|
|
chip->pci = pci;
|
|
chip->irq = -1;
|
|
|
|
spin_lock_init(&chip->emu_lock);
|
|
|
|
chip->port = pci_resource_start(pci, 0);
|
|
chip->res_port = request_region(chip->port, 0x20, "snd_ca0106");
|
|
if (!chip->res_port) {
|
|
snd_ca0106_free(chip);
|
|
printk(KERN_ERR "cannot allocate the port\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (request_irq(pci->irq, snd_ca0106_interrupt,
|
|
IRQF_SHARED, KBUILD_MODNAME, chip)) {
|
|
snd_ca0106_free(chip);
|
|
printk(KERN_ERR "cannot grab irq\n");
|
|
return -EBUSY;
|
|
}
|
|
chip->irq = pci->irq;
|
|
|
|
/* This stores the periods table. */
|
|
if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
|
|
1024, &chip->buffer) < 0) {
|
|
snd_ca0106_free(chip);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pci_set_master(pci);
|
|
/* read serial */
|
|
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
|
|
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
|
|
printk(KERN_INFO "snd-ca0106: Model %04x Rev %08x Serial %08x\n",
|
|
chip->model, pci->revision, chip->serial);
|
|
strcpy(card->driver, "CA0106");
|
|
strcpy(card->shortname, "CA0106");
|
|
|
|
for (c = ca0106_chip_details; c->serial; c++) {
|
|
if (subsystem[dev]) {
|
|
if (c->serial == subsystem[dev])
|
|
break;
|
|
} else if (c->serial == chip->serial)
|
|
break;
|
|
}
|
|
chip->details = c;
|
|
if (subsystem[dev]) {
|
|
printk(KERN_INFO "snd-ca0106: Sound card name=%s, "
|
|
"subsystem=0x%x. Forced to subsystem=0x%x\n",
|
|
c->name, chip->serial, subsystem[dev]);
|
|
}
|
|
|
|
sprintf(card->longname, "%s at 0x%lx irq %i",
|
|
c->name, chip->port, chip->irq);
|
|
|
|
ca0106_init_chip(chip, 0);
|
|
|
|
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
|
|
if (err < 0) {
|
|
snd_ca0106_free(chip);
|
|
return err;
|
|
}
|
|
*rchip = chip;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void ca0106_midi_interrupt_enable(struct snd_ca_midi *midi, int intr)
|
|
{
|
|
snd_ca0106_intr_enable((struct snd_ca0106 *)(midi->dev_id), intr);
|
|
}
|
|
|
|
static void ca0106_midi_interrupt_disable(struct snd_ca_midi *midi, int intr)
|
|
{
|
|
snd_ca0106_intr_disable((struct snd_ca0106 *)(midi->dev_id), intr);
|
|
}
|
|
|
|
static unsigned char ca0106_midi_read(struct snd_ca_midi *midi, int idx)
|
|
{
|
|
return (unsigned char)snd_ca0106_ptr_read((struct snd_ca0106 *)(midi->dev_id),
|
|
midi->port + idx, 0);
|
|
}
|
|
|
|
static void ca0106_midi_write(struct snd_ca_midi *midi, int data, int idx)
|
|
{
|
|
snd_ca0106_ptr_write((struct snd_ca0106 *)(midi->dev_id), midi->port + idx, 0, data);
|
|
}
|
|
|
|
static struct snd_card *ca0106_dev_id_card(void *dev_id)
|
|
{
|
|
return ((struct snd_ca0106 *)dev_id)->card;
|
|
}
|
|
|
|
static int ca0106_dev_id_port(void *dev_id)
|
|
{
|
|
return ((struct snd_ca0106 *)dev_id)->port;
|
|
}
|
|
|
|
static int snd_ca0106_midi(struct snd_ca0106 *chip, unsigned int channel)
|
|
{
|
|
struct snd_ca_midi *midi;
|
|
char *name;
|
|
int err;
|
|
|
|
if (channel == CA0106_MIDI_CHAN_B) {
|
|
name = "CA0106 MPU-401 (UART) B";
|
|
midi = &chip->midi2;
|
|
midi->tx_enable = INTE_MIDI_TX_B;
|
|
midi->rx_enable = INTE_MIDI_RX_B;
|
|
midi->ipr_tx = IPR_MIDI_TX_B;
|
|
midi->ipr_rx = IPR_MIDI_RX_B;
|
|
midi->port = MIDI_UART_B_DATA;
|
|
} else {
|
|
name = "CA0106 MPU-401 (UART)";
|
|
midi = &chip->midi;
|
|
midi->tx_enable = INTE_MIDI_TX_A;
|
|
midi->rx_enable = INTE_MIDI_TX_B;
|
|
midi->ipr_tx = IPR_MIDI_TX_A;
|
|
midi->ipr_rx = IPR_MIDI_RX_A;
|
|
midi->port = MIDI_UART_A_DATA;
|
|
}
|
|
|
|
midi->reset = CA0106_MPU401_RESET;
|
|
midi->enter_uart = CA0106_MPU401_ENTER_UART;
|
|
midi->ack = CA0106_MPU401_ACK;
|
|
|
|
midi->input_avail = CA0106_MIDI_INPUT_AVAIL;
|
|
midi->output_ready = CA0106_MIDI_OUTPUT_READY;
|
|
|
|
midi->channel = channel;
|
|
|
|
midi->interrupt_enable = ca0106_midi_interrupt_enable;
|
|
midi->interrupt_disable = ca0106_midi_interrupt_disable;
|
|
|
|
midi->read = ca0106_midi_read;
|
|
midi->write = ca0106_midi_write;
|
|
|
|
midi->get_dev_id_card = ca0106_dev_id_card;
|
|
midi->get_dev_id_port = ca0106_dev_id_port;
|
|
|
|
midi->dev_id = chip;
|
|
|
|
if ((err = ca_midi_init(chip, midi, 0, name)) < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int snd_ca0106_probe(struct pci_dev *pci,
|
|
const struct pci_device_id *pci_id)
|
|
{
|
|
static int dev;
|
|
struct snd_card *card;
|
|
struct snd_ca0106 *chip;
|
|
int i, err;
|
|
|
|
if (dev >= SNDRV_CARDS)
|
|
return -ENODEV;
|
|
if (!enable[dev]) {
|
|
dev++;
|
|
return -ENOENT;
|
|
}
|
|
|
|
err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = snd_ca0106_create(dev, card, pci, &chip);
|
|
if (err < 0)
|
|
goto error;
|
|
card->private_data = chip;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
err = snd_ca0106_pcm(chip, i);
|
|
if (err < 0)
|
|
goto error;
|
|
}
|
|
|
|
if (chip->details->ac97 == 1) {
|
|
/* The SB0410 and SB0413 do not have an AC97 chip. */
|
|
err = snd_ca0106_ac97(chip);
|
|
if (err < 0)
|
|
goto error;
|
|
}
|
|
err = snd_ca0106_mixer(chip);
|
|
if (err < 0)
|
|
goto error;
|
|
|
|
snd_printdd("ca0106: probe for MIDI channel A ...");
|
|
err = snd_ca0106_midi(chip, CA0106_MIDI_CHAN_A);
|
|
if (err < 0)
|
|
goto error;
|
|
snd_printdd(" done.\n");
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
snd_ca0106_proc_init(chip);
|
|
#endif
|
|
|
|
snd_card_set_dev(card, &pci->dev);
|
|
|
|
err = snd_card_register(card);
|
|
if (err < 0)
|
|
goto error;
|
|
|
|
pci_set_drvdata(pci, card);
|
|
dev++;
|
|
return 0;
|
|
|
|
error:
|
|
snd_card_free(card);
|
|
return err;
|
|
}
|
|
|
|
static void snd_ca0106_remove(struct pci_dev *pci)
|
|
{
|
|
snd_card_free(pci_get_drvdata(pci));
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int snd_ca0106_suspend(struct device *dev)
|
|
{
|
|
struct pci_dev *pci = to_pci_dev(dev);
|
|
struct snd_card *card = dev_get_drvdata(dev);
|
|
struct snd_ca0106 *chip = card->private_data;
|
|
int i;
|
|
|
|
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
|
|
for (i = 0; i < 4; i++)
|
|
snd_pcm_suspend_all(chip->pcm[i]);
|
|
if (chip->details->ac97)
|
|
snd_ac97_suspend(chip->ac97);
|
|
snd_ca0106_mixer_suspend(chip);
|
|
|
|
ca0106_stop_chip(chip);
|
|
|
|
pci_disable_device(pci);
|
|
pci_save_state(pci);
|
|
pci_set_power_state(pci, PCI_D3hot);
|
|
return 0;
|
|
}
|
|
|
|
static int snd_ca0106_resume(struct device *dev)
|
|
{
|
|
struct pci_dev *pci = to_pci_dev(dev);
|
|
struct snd_card *card = dev_get_drvdata(dev);
|
|
struct snd_ca0106 *chip = card->private_data;
|
|
int i;
|
|
|
|
pci_set_power_state(pci, PCI_D0);
|
|
pci_restore_state(pci);
|
|
|
|
if (pci_enable_device(pci) < 0) {
|
|
snd_card_disconnect(card);
|
|
return -EIO;
|
|
}
|
|
|
|
pci_set_master(pci);
|
|
|
|
ca0106_init_chip(chip, 1);
|
|
|
|
if (chip->details->ac97)
|
|
snd_ac97_resume(chip->ac97);
|
|
snd_ca0106_mixer_resume(chip);
|
|
if (chip->details->spi_dac) {
|
|
for (i = 0; i < ARRAY_SIZE(chip->spi_dac_reg); i++)
|
|
snd_ca0106_spi_write(chip, chip->spi_dac_reg[i]);
|
|
}
|
|
|
|
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(snd_ca0106_pm, snd_ca0106_suspend, snd_ca0106_resume);
|
|
#define SND_CA0106_PM_OPS &snd_ca0106_pm
|
|
#else
|
|
#define SND_CA0106_PM_OPS NULL
|
|
#endif
|
|
|
|
// PCI IDs
|
|
static DEFINE_PCI_DEVICE_TABLE(snd_ca0106_ids) = {
|
|
{ PCI_VDEVICE(CREATIVE, 0x0007), 0 }, /* Audigy LS or Live 24bit */
|
|
{ 0, }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, snd_ca0106_ids);
|
|
|
|
// pci_driver definition
|
|
static struct pci_driver ca0106_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = snd_ca0106_ids,
|
|
.probe = snd_ca0106_probe,
|
|
.remove = snd_ca0106_remove,
|
|
.driver = {
|
|
.pm = SND_CA0106_PM_OPS,
|
|
},
|
|
};
|
|
|
|
module_pci_driver(ca0106_driver);
|