974 строки
23 KiB
C
974 строки
23 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Freescale Vybrid vf610 ADC driver
|
|
*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
/* This will be the driver name the kernel reports */
|
|
#define DRIVER_NAME "vf610-adc"
|
|
|
|
/* Vybrid/IMX ADC registers */
|
|
#define VF610_REG_ADC_HC0 0x00
|
|
#define VF610_REG_ADC_HC1 0x04
|
|
#define VF610_REG_ADC_HS 0x08
|
|
#define VF610_REG_ADC_R0 0x0c
|
|
#define VF610_REG_ADC_R1 0x10
|
|
#define VF610_REG_ADC_CFG 0x14
|
|
#define VF610_REG_ADC_GC 0x18
|
|
#define VF610_REG_ADC_GS 0x1c
|
|
#define VF610_REG_ADC_CV 0x20
|
|
#define VF610_REG_ADC_OFS 0x24
|
|
#define VF610_REG_ADC_CAL 0x28
|
|
#define VF610_REG_ADC_PCTL 0x30
|
|
|
|
/* Configuration register field define */
|
|
#define VF610_ADC_MODE_BIT8 0x00
|
|
#define VF610_ADC_MODE_BIT10 0x04
|
|
#define VF610_ADC_MODE_BIT12 0x08
|
|
#define VF610_ADC_MODE_MASK 0x0c
|
|
#define VF610_ADC_BUSCLK2_SEL 0x01
|
|
#define VF610_ADC_ALTCLK_SEL 0x02
|
|
#define VF610_ADC_ADACK_SEL 0x03
|
|
#define VF610_ADC_ADCCLK_MASK 0x03
|
|
#define VF610_ADC_CLK_DIV2 0x20
|
|
#define VF610_ADC_CLK_DIV4 0x40
|
|
#define VF610_ADC_CLK_DIV8 0x60
|
|
#define VF610_ADC_CLK_MASK 0x60
|
|
#define VF610_ADC_ADLSMP_LONG 0x10
|
|
#define VF610_ADC_ADSTS_SHORT 0x100
|
|
#define VF610_ADC_ADSTS_NORMAL 0x200
|
|
#define VF610_ADC_ADSTS_LONG 0x300
|
|
#define VF610_ADC_ADSTS_MASK 0x300
|
|
#define VF610_ADC_ADLPC_EN 0x80
|
|
#define VF610_ADC_ADHSC_EN 0x400
|
|
#define VF610_ADC_REFSEL_VALT 0x800
|
|
#define VF610_ADC_REFSEL_VBG 0x1000
|
|
#define VF610_ADC_ADTRG_HARD 0x2000
|
|
#define VF610_ADC_AVGS_8 0x4000
|
|
#define VF610_ADC_AVGS_16 0x8000
|
|
#define VF610_ADC_AVGS_32 0xC000
|
|
#define VF610_ADC_AVGS_MASK 0xC000
|
|
#define VF610_ADC_OVWREN 0x10000
|
|
|
|
/* General control register field define */
|
|
#define VF610_ADC_ADACKEN 0x1
|
|
#define VF610_ADC_DMAEN 0x2
|
|
#define VF610_ADC_ACREN 0x4
|
|
#define VF610_ADC_ACFGT 0x8
|
|
#define VF610_ADC_ACFE 0x10
|
|
#define VF610_ADC_AVGEN 0x20
|
|
#define VF610_ADC_ADCON 0x40
|
|
#define VF610_ADC_CAL 0x80
|
|
|
|
/* Other field define */
|
|
#define VF610_ADC_ADCHC(x) ((x) & 0x1F)
|
|
#define VF610_ADC_AIEN (0x1 << 7)
|
|
#define VF610_ADC_CONV_DISABLE 0x1F
|
|
#define VF610_ADC_HS_COCO0 0x1
|
|
#define VF610_ADC_CALF 0x2
|
|
#define VF610_ADC_TIMEOUT msecs_to_jiffies(100)
|
|
|
|
#define DEFAULT_SAMPLE_TIME 1000
|
|
|
|
/* V at 25°C of 696 mV */
|
|
#define VF610_VTEMP25_3V0 950
|
|
/* V at 25°C of 699 mV */
|
|
#define VF610_VTEMP25_3V3 867
|
|
/* Typical sensor slope coefficient at all temperatures */
|
|
#define VF610_TEMP_SLOPE_COEFF 1840
|
|
|
|
enum clk_sel {
|
|
VF610_ADCIOC_BUSCLK_SET,
|
|
VF610_ADCIOC_ALTCLK_SET,
|
|
VF610_ADCIOC_ADACK_SET,
|
|
};
|
|
|
|
enum vol_ref {
|
|
VF610_ADCIOC_VR_VREF_SET,
|
|
VF610_ADCIOC_VR_VALT_SET,
|
|
VF610_ADCIOC_VR_VBG_SET,
|
|
};
|
|
|
|
enum average_sel {
|
|
VF610_ADC_SAMPLE_1,
|
|
VF610_ADC_SAMPLE_4,
|
|
VF610_ADC_SAMPLE_8,
|
|
VF610_ADC_SAMPLE_16,
|
|
VF610_ADC_SAMPLE_32,
|
|
};
|
|
|
|
enum conversion_mode_sel {
|
|
VF610_ADC_CONV_NORMAL,
|
|
VF610_ADC_CONV_HIGH_SPEED,
|
|
VF610_ADC_CONV_LOW_POWER,
|
|
};
|
|
|
|
enum lst_adder_sel {
|
|
VF610_ADCK_CYCLES_3,
|
|
VF610_ADCK_CYCLES_5,
|
|
VF610_ADCK_CYCLES_7,
|
|
VF610_ADCK_CYCLES_9,
|
|
VF610_ADCK_CYCLES_13,
|
|
VF610_ADCK_CYCLES_17,
|
|
VF610_ADCK_CYCLES_21,
|
|
VF610_ADCK_CYCLES_25,
|
|
};
|
|
|
|
struct vf610_adc_feature {
|
|
enum clk_sel clk_sel;
|
|
enum vol_ref vol_ref;
|
|
enum conversion_mode_sel conv_mode;
|
|
|
|
int clk_div;
|
|
int sample_rate;
|
|
int res_mode;
|
|
u32 lst_adder_index;
|
|
u32 default_sample_time;
|
|
|
|
bool calibration;
|
|
bool ovwren;
|
|
};
|
|
|
|
struct vf610_adc {
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
struct clk *clk;
|
|
|
|
u32 vref_uv;
|
|
u32 value;
|
|
struct regulator *vref;
|
|
|
|
u32 max_adck_rate[3];
|
|
struct vf610_adc_feature adc_feature;
|
|
|
|
u32 sample_freq_avail[5];
|
|
|
|
struct completion completion;
|
|
/* Ensure the timestamp is naturally aligned */
|
|
struct {
|
|
u16 chan;
|
|
s64 timestamp __aligned(8);
|
|
} scan;
|
|
};
|
|
|
|
static const u32 vf610_hw_avgs[] = { 1, 4, 8, 16, 32 };
|
|
static const u32 vf610_lst_adder[] = { 3, 5, 7, 9, 13, 17, 21, 25 };
|
|
|
|
static inline void vf610_adc_calculate_rates(struct vf610_adc *info)
|
|
{
|
|
struct vf610_adc_feature *adc_feature = &info->adc_feature;
|
|
unsigned long adck_rate, ipg_rate = clk_get_rate(info->clk);
|
|
u32 adck_period, lst_addr_min;
|
|
int divisor, i;
|
|
|
|
adck_rate = info->max_adck_rate[adc_feature->conv_mode];
|
|
|
|
if (adck_rate) {
|
|
/* calculate clk divider which is within specification */
|
|
divisor = ipg_rate / adck_rate;
|
|
adc_feature->clk_div = 1 << fls(divisor + 1);
|
|
} else {
|
|
/* fall-back value using a safe divisor */
|
|
adc_feature->clk_div = 8;
|
|
}
|
|
|
|
adck_rate = ipg_rate / adc_feature->clk_div;
|
|
|
|
/*
|
|
* Determine the long sample time adder value to be used based
|
|
* on the default minimum sample time provided.
|
|
*/
|
|
adck_period = NSEC_PER_SEC / adck_rate;
|
|
lst_addr_min = adc_feature->default_sample_time / adck_period;
|
|
for (i = 0; i < ARRAY_SIZE(vf610_lst_adder); i++) {
|
|
if (vf610_lst_adder[i] > lst_addr_min) {
|
|
adc_feature->lst_adder_index = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Calculate ADC sample frequencies
|
|
* Sample time unit is ADCK cycles. ADCK clk source is ipg clock,
|
|
* which is the same as bus clock.
|
|
*
|
|
* ADC conversion time = SFCAdder + AverageNum x (BCT + LSTAdder)
|
|
* SFCAdder: fixed to 6 ADCK cycles
|
|
* AverageNum: 1, 4, 8, 16, 32 samples for hardware average.
|
|
* BCT (Base Conversion Time): fixed to 25 ADCK cycles for 12 bit mode
|
|
* LSTAdder(Long Sample Time): 3, 5, 7, 9, 13, 17, 21, 25 ADCK cycles
|
|
*/
|
|
for (i = 0; i < ARRAY_SIZE(vf610_hw_avgs); i++)
|
|
info->sample_freq_avail[i] =
|
|
adck_rate / (6 + vf610_hw_avgs[i] *
|
|
(25 + vf610_lst_adder[adc_feature->lst_adder_index]));
|
|
}
|
|
|
|
static inline void vf610_adc_cfg_init(struct vf610_adc *info)
|
|
{
|
|
struct vf610_adc_feature *adc_feature = &info->adc_feature;
|
|
|
|
/* set default Configuration for ADC controller */
|
|
adc_feature->clk_sel = VF610_ADCIOC_BUSCLK_SET;
|
|
adc_feature->vol_ref = VF610_ADCIOC_VR_VREF_SET;
|
|
|
|
adc_feature->calibration = true;
|
|
adc_feature->ovwren = true;
|
|
|
|
adc_feature->res_mode = 12;
|
|
adc_feature->sample_rate = 1;
|
|
|
|
adc_feature->conv_mode = VF610_ADC_CONV_LOW_POWER;
|
|
|
|
vf610_adc_calculate_rates(info);
|
|
}
|
|
|
|
static void vf610_adc_cfg_post_set(struct vf610_adc *info)
|
|
{
|
|
struct vf610_adc_feature *adc_feature = &info->adc_feature;
|
|
int cfg_data = 0;
|
|
int gc_data = 0;
|
|
|
|
switch (adc_feature->clk_sel) {
|
|
case VF610_ADCIOC_ALTCLK_SET:
|
|
cfg_data |= VF610_ADC_ALTCLK_SEL;
|
|
break;
|
|
case VF610_ADCIOC_ADACK_SET:
|
|
cfg_data |= VF610_ADC_ADACK_SEL;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* low power set for calibration */
|
|
cfg_data |= VF610_ADC_ADLPC_EN;
|
|
|
|
/* enable high speed for calibration */
|
|
cfg_data |= VF610_ADC_ADHSC_EN;
|
|
|
|
/* voltage reference */
|
|
switch (adc_feature->vol_ref) {
|
|
case VF610_ADCIOC_VR_VREF_SET:
|
|
break;
|
|
case VF610_ADCIOC_VR_VALT_SET:
|
|
cfg_data |= VF610_ADC_REFSEL_VALT;
|
|
break;
|
|
case VF610_ADCIOC_VR_VBG_SET:
|
|
cfg_data |= VF610_ADC_REFSEL_VBG;
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "error voltage reference\n");
|
|
}
|
|
|
|
/* data overwrite enable */
|
|
if (adc_feature->ovwren)
|
|
cfg_data |= VF610_ADC_OVWREN;
|
|
|
|
writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
|
|
writel(gc_data, info->regs + VF610_REG_ADC_GC);
|
|
}
|
|
|
|
static void vf610_adc_calibration(struct vf610_adc *info)
|
|
{
|
|
int adc_gc, hc_cfg;
|
|
|
|
if (!info->adc_feature.calibration)
|
|
return;
|
|
|
|
/* enable calibration interrupt */
|
|
hc_cfg = VF610_ADC_AIEN | VF610_ADC_CONV_DISABLE;
|
|
writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
|
|
|
|
adc_gc = readl(info->regs + VF610_REG_ADC_GC);
|
|
writel(adc_gc | VF610_ADC_CAL, info->regs + VF610_REG_ADC_GC);
|
|
|
|
if (!wait_for_completion_timeout(&info->completion, VF610_ADC_TIMEOUT))
|
|
dev_err(info->dev, "Timeout for adc calibration\n");
|
|
|
|
adc_gc = readl(info->regs + VF610_REG_ADC_GS);
|
|
if (adc_gc & VF610_ADC_CALF)
|
|
dev_err(info->dev, "ADC calibration failed\n");
|
|
|
|
info->adc_feature.calibration = false;
|
|
}
|
|
|
|
static void vf610_adc_cfg_set(struct vf610_adc *info)
|
|
{
|
|
struct vf610_adc_feature *adc_feature = &(info->adc_feature);
|
|
int cfg_data;
|
|
|
|
cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
|
|
|
|
cfg_data &= ~VF610_ADC_ADLPC_EN;
|
|
if (adc_feature->conv_mode == VF610_ADC_CONV_LOW_POWER)
|
|
cfg_data |= VF610_ADC_ADLPC_EN;
|
|
|
|
cfg_data &= ~VF610_ADC_ADHSC_EN;
|
|
if (adc_feature->conv_mode == VF610_ADC_CONV_HIGH_SPEED)
|
|
cfg_data |= VF610_ADC_ADHSC_EN;
|
|
|
|
writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
|
|
}
|
|
|
|
static void vf610_adc_sample_set(struct vf610_adc *info)
|
|
{
|
|
struct vf610_adc_feature *adc_feature = &(info->adc_feature);
|
|
int cfg_data, gc_data;
|
|
|
|
cfg_data = readl(info->regs + VF610_REG_ADC_CFG);
|
|
gc_data = readl(info->regs + VF610_REG_ADC_GC);
|
|
|
|
/* resolution mode */
|
|
cfg_data &= ~VF610_ADC_MODE_MASK;
|
|
switch (adc_feature->res_mode) {
|
|
case 8:
|
|
cfg_data |= VF610_ADC_MODE_BIT8;
|
|
break;
|
|
case 10:
|
|
cfg_data |= VF610_ADC_MODE_BIT10;
|
|
break;
|
|
case 12:
|
|
cfg_data |= VF610_ADC_MODE_BIT12;
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "error resolution mode\n");
|
|
break;
|
|
}
|
|
|
|
/* clock select and clock divider */
|
|
cfg_data &= ~(VF610_ADC_CLK_MASK | VF610_ADC_ADCCLK_MASK);
|
|
switch (adc_feature->clk_div) {
|
|
case 1:
|
|
break;
|
|
case 2:
|
|
cfg_data |= VF610_ADC_CLK_DIV2;
|
|
break;
|
|
case 4:
|
|
cfg_data |= VF610_ADC_CLK_DIV4;
|
|
break;
|
|
case 8:
|
|
cfg_data |= VF610_ADC_CLK_DIV8;
|
|
break;
|
|
case 16:
|
|
switch (adc_feature->clk_sel) {
|
|
case VF610_ADCIOC_BUSCLK_SET:
|
|
cfg_data |= VF610_ADC_BUSCLK2_SEL | VF610_ADC_CLK_DIV8;
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "error clk divider\n");
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Set ADLSMP and ADSTS based on the Long Sample Time Adder value
|
|
* determined.
|
|
*/
|
|
switch (adc_feature->lst_adder_index) {
|
|
case VF610_ADCK_CYCLES_3:
|
|
break;
|
|
case VF610_ADCK_CYCLES_5:
|
|
cfg_data |= VF610_ADC_ADSTS_SHORT;
|
|
break;
|
|
case VF610_ADCK_CYCLES_7:
|
|
cfg_data |= VF610_ADC_ADSTS_NORMAL;
|
|
break;
|
|
case VF610_ADCK_CYCLES_9:
|
|
cfg_data |= VF610_ADC_ADSTS_LONG;
|
|
break;
|
|
case VF610_ADCK_CYCLES_13:
|
|
cfg_data |= VF610_ADC_ADLSMP_LONG;
|
|
break;
|
|
case VF610_ADCK_CYCLES_17:
|
|
cfg_data |= VF610_ADC_ADLSMP_LONG;
|
|
cfg_data |= VF610_ADC_ADSTS_SHORT;
|
|
break;
|
|
case VF610_ADCK_CYCLES_21:
|
|
cfg_data |= VF610_ADC_ADLSMP_LONG;
|
|
cfg_data |= VF610_ADC_ADSTS_NORMAL;
|
|
break;
|
|
case VF610_ADCK_CYCLES_25:
|
|
cfg_data |= VF610_ADC_ADLSMP_LONG;
|
|
cfg_data |= VF610_ADC_ADSTS_NORMAL;
|
|
break;
|
|
default:
|
|
dev_err(info->dev, "error in sample time select\n");
|
|
}
|
|
|
|
/* update hardware average selection */
|
|
cfg_data &= ~VF610_ADC_AVGS_MASK;
|
|
gc_data &= ~VF610_ADC_AVGEN;
|
|
switch (adc_feature->sample_rate) {
|
|
case VF610_ADC_SAMPLE_1:
|
|
break;
|
|
case VF610_ADC_SAMPLE_4:
|
|
gc_data |= VF610_ADC_AVGEN;
|
|
break;
|
|
case VF610_ADC_SAMPLE_8:
|
|
gc_data |= VF610_ADC_AVGEN;
|
|
cfg_data |= VF610_ADC_AVGS_8;
|
|
break;
|
|
case VF610_ADC_SAMPLE_16:
|
|
gc_data |= VF610_ADC_AVGEN;
|
|
cfg_data |= VF610_ADC_AVGS_16;
|
|
break;
|
|
case VF610_ADC_SAMPLE_32:
|
|
gc_data |= VF610_ADC_AVGEN;
|
|
cfg_data |= VF610_ADC_AVGS_32;
|
|
break;
|
|
default:
|
|
dev_err(info->dev,
|
|
"error hardware sample average select\n");
|
|
}
|
|
|
|
writel(cfg_data, info->regs + VF610_REG_ADC_CFG);
|
|
writel(gc_data, info->regs + VF610_REG_ADC_GC);
|
|
}
|
|
|
|
static void vf610_adc_hw_init(struct vf610_adc *info)
|
|
{
|
|
/* CFG: Feature set */
|
|
vf610_adc_cfg_post_set(info);
|
|
vf610_adc_sample_set(info);
|
|
|
|
/* adc calibration */
|
|
vf610_adc_calibration(info);
|
|
|
|
/* CFG: power and speed set */
|
|
vf610_adc_cfg_set(info);
|
|
}
|
|
|
|
static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan,
|
|
unsigned int mode)
|
|
{
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
info->adc_feature.conv_mode = mode;
|
|
vf610_adc_calculate_rates(info);
|
|
vf610_adc_hw_init(info);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vf610_get_conversion_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
|
|
return info->adc_feature.conv_mode;
|
|
}
|
|
|
|
static const char * const vf610_conv_modes[] = { "normal", "high-speed",
|
|
"low-power" };
|
|
|
|
static const struct iio_enum vf610_conversion_mode = {
|
|
.items = vf610_conv_modes,
|
|
.num_items = ARRAY_SIZE(vf610_conv_modes),
|
|
.get = vf610_get_conversion_mode,
|
|
.set = vf610_set_conversion_mode,
|
|
};
|
|
|
|
static const struct iio_chan_spec_ext_info vf610_ext_info[] = {
|
|
IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR, &vf610_conversion_mode),
|
|
{},
|
|
};
|
|
|
|
#define VF610_ADC_CHAN(_idx, _chan_type) { \
|
|
.type = (_chan_type), \
|
|
.indexed = 1, \
|
|
.channel = (_idx), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.ext_info = vf610_ext_info, \
|
|
.scan_index = (_idx), \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
}, \
|
|
}
|
|
|
|
#define VF610_ADC_TEMPERATURE_CHAN(_idx, _chan_type) { \
|
|
.type = (_chan_type), \
|
|
.channel = (_idx), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
|
|
.scan_index = (_idx), \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = 12, \
|
|
.storagebits = 16, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec vf610_adc_iio_channels[] = {
|
|
VF610_ADC_CHAN(0, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(1, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(2, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(3, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(4, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(5, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(6, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(7, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(8, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(9, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(10, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(11, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(12, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(13, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(14, IIO_VOLTAGE),
|
|
VF610_ADC_CHAN(15, IIO_VOLTAGE),
|
|
VF610_ADC_TEMPERATURE_CHAN(26, IIO_TEMP),
|
|
IIO_CHAN_SOFT_TIMESTAMP(32),
|
|
/* sentinel */
|
|
};
|
|
|
|
static int vf610_adc_read_data(struct vf610_adc *info)
|
|
{
|
|
int result;
|
|
|
|
result = readl(info->regs + VF610_REG_ADC_R0);
|
|
|
|
switch (info->adc_feature.res_mode) {
|
|
case 8:
|
|
result &= 0xFF;
|
|
break;
|
|
case 10:
|
|
result &= 0x3FF;
|
|
break;
|
|
case 12:
|
|
result &= 0xFFF;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static irqreturn_t vf610_adc_isr(int irq, void *dev_id)
|
|
{
|
|
struct iio_dev *indio_dev = dev_id;
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
int coco;
|
|
|
|
coco = readl(info->regs + VF610_REG_ADC_HS);
|
|
if (coco & VF610_ADC_HS_COCO0) {
|
|
info->value = vf610_adc_read_data(info);
|
|
if (iio_buffer_enabled(indio_dev)) {
|
|
info->scan.chan = info->value;
|
|
iio_push_to_buffers_with_timestamp(indio_dev,
|
|
&info->scan,
|
|
iio_get_time_ns(indio_dev));
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
} else
|
|
complete(&info->completion);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static ssize_t vf610_show_samp_freq_avail(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct vf610_adc *info = iio_priv(dev_to_iio_dev(dev));
|
|
size_t len = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(info->sample_freq_avail); i++)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len,
|
|
"%u ", info->sample_freq_avail[i]);
|
|
|
|
/* replace trailing space by newline */
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(vf610_show_samp_freq_avail);
|
|
|
|
static struct attribute *vf610_attributes[] = {
|
|
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group vf610_attribute_group = {
|
|
.attrs = vf610_attributes,
|
|
};
|
|
|
|
static int vf610_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long mask)
|
|
{
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
unsigned int hc_cfg;
|
|
long ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (iio_buffer_enabled(indio_dev)) {
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return -EBUSY;
|
|
}
|
|
|
|
reinit_completion(&info->completion);
|
|
hc_cfg = VF610_ADC_ADCHC(chan->channel);
|
|
hc_cfg |= VF610_ADC_AIEN;
|
|
writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
|
|
ret = wait_for_completion_interruptible_timeout
|
|
(&info->completion, VF610_ADC_TIMEOUT);
|
|
if (ret == 0) {
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return -ETIMEDOUT;
|
|
}
|
|
if (ret < 0) {
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return ret;
|
|
}
|
|
|
|
switch (chan->type) {
|
|
case IIO_VOLTAGE:
|
|
*val = info->value;
|
|
break;
|
|
case IIO_TEMP:
|
|
/*
|
|
* Calculate in degree Celsius times 1000
|
|
* Using the typical sensor slope of 1.84 mV/°C
|
|
* and VREFH_ADC at 3.3V, V at 25°C of 699 mV
|
|
*/
|
|
*val = 25000 - ((int)info->value - VF610_VTEMP25_3V3) *
|
|
1000000 / VF610_TEMP_SLOPE_COEFF;
|
|
|
|
break;
|
|
default:
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = info->vref_uv / 1000;
|
|
*val2 = info->adc_feature.res_mode;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = info->sample_freq_avail[info->adc_feature.sample_rate];
|
|
*val2 = 0;
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int vf610_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
int i;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
for (i = 0;
|
|
i < ARRAY_SIZE(info->sample_freq_avail);
|
|
i++)
|
|
if (val == info->sample_freq_avail[i]) {
|
|
info->adc_feature.sample_rate = i;
|
|
vf610_adc_sample_set(info);
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int vf610_adc_buffer_postenable(struct iio_dev *indio_dev)
|
|
{
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
unsigned int channel;
|
|
int val;
|
|
|
|
val = readl(info->regs + VF610_REG_ADC_GC);
|
|
val |= VF610_ADC_ADCON;
|
|
writel(val, info->regs + VF610_REG_ADC_GC);
|
|
|
|
channel = find_first_bit(indio_dev->active_scan_mask,
|
|
indio_dev->masklength);
|
|
|
|
val = VF610_ADC_ADCHC(channel);
|
|
val |= VF610_ADC_AIEN;
|
|
|
|
writel(val, info->regs + VF610_REG_ADC_HC0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vf610_adc_buffer_predisable(struct iio_dev *indio_dev)
|
|
{
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
unsigned int hc_cfg = 0;
|
|
int val;
|
|
|
|
val = readl(info->regs + VF610_REG_ADC_GC);
|
|
val &= ~VF610_ADC_ADCON;
|
|
writel(val, info->regs + VF610_REG_ADC_GC);
|
|
|
|
hc_cfg |= VF610_ADC_CONV_DISABLE;
|
|
hc_cfg &= ~VF610_ADC_AIEN;
|
|
|
|
writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops iio_triggered_buffer_setup_ops = {
|
|
.postenable = &vf610_adc_buffer_postenable,
|
|
.predisable = &vf610_adc_buffer_predisable,
|
|
.validate_scan_mask = &iio_validate_scan_mask_onehot,
|
|
};
|
|
|
|
static int vf610_adc_reg_access(struct iio_dev *indio_dev,
|
|
unsigned reg, unsigned writeval,
|
|
unsigned *readval)
|
|
{
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
|
|
if ((readval == NULL) ||
|
|
((reg % 4) || (reg > VF610_REG_ADC_PCTL)))
|
|
return -EINVAL;
|
|
|
|
*readval = readl(info->regs + reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_info vf610_adc_iio_info = {
|
|
.read_raw = &vf610_read_raw,
|
|
.write_raw = &vf610_write_raw,
|
|
.debugfs_reg_access = &vf610_adc_reg_access,
|
|
.attrs = &vf610_attribute_group,
|
|
};
|
|
|
|
static const struct of_device_id vf610_adc_match[] = {
|
|
{ .compatible = "fsl,vf610-adc", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, vf610_adc_match);
|
|
|
|
static int vf610_adc_probe(struct platform_device *pdev)
|
|
{
|
|
struct vf610_adc *info;
|
|
struct iio_dev *indio_dev;
|
|
int irq;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct vf610_adc));
|
|
if (!indio_dev) {
|
|
dev_err(&pdev->dev, "Failed allocating iio device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
info = iio_priv(indio_dev);
|
|
info->dev = &pdev->dev;
|
|
|
|
info->regs = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(info->regs))
|
|
return PTR_ERR(info->regs);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
ret = devm_request_irq(info->dev, irq,
|
|
vf610_adc_isr, 0,
|
|
dev_name(&pdev->dev), indio_dev);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed requesting irq, irq = %d\n", irq);
|
|
return ret;
|
|
}
|
|
|
|
info->clk = devm_clk_get(&pdev->dev, "adc");
|
|
if (IS_ERR(info->clk)) {
|
|
dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
|
|
PTR_ERR(info->clk));
|
|
return PTR_ERR(info->clk);
|
|
}
|
|
|
|
info->vref = devm_regulator_get(&pdev->dev, "vref");
|
|
if (IS_ERR(info->vref))
|
|
return PTR_ERR(info->vref);
|
|
|
|
ret = regulator_enable(info->vref);
|
|
if (ret)
|
|
return ret;
|
|
|
|
info->vref_uv = regulator_get_voltage(info->vref);
|
|
|
|
of_property_read_u32_array(pdev->dev.of_node, "fsl,adck-max-frequency",
|
|
info->max_adck_rate, 3);
|
|
|
|
ret = of_property_read_u32(pdev->dev.of_node, "min-sample-time",
|
|
&info->adc_feature.default_sample_time);
|
|
if (ret)
|
|
info->adc_feature.default_sample_time = DEFAULT_SAMPLE_TIME;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
init_completion(&info->completion);
|
|
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->info = &vf610_adc_iio_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = vf610_adc_iio_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(vf610_adc_iio_channels);
|
|
|
|
ret = clk_prepare_enable(info->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Could not prepare or enable the clock.\n");
|
|
goto error_adc_clk_enable;
|
|
}
|
|
|
|
vf610_adc_cfg_init(info);
|
|
vf610_adc_hw_init(info);
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
|
|
NULL, &iio_triggered_buffer_setup_ops);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Couldn't initialise the buffer\n");
|
|
goto error_iio_device_register;
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Couldn't register the device.\n");
|
|
goto error_adc_buffer_init;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_adc_buffer_init:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
error_iio_device_register:
|
|
clk_disable_unprepare(info->clk);
|
|
error_adc_clk_enable:
|
|
regulator_disable(info->vref);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int vf610_adc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
regulator_disable(info->vref);
|
|
clk_disable_unprepare(info->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int vf610_adc_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
int hc_cfg;
|
|
|
|
/* ADC controller enters to stop mode */
|
|
hc_cfg = readl(info->regs + VF610_REG_ADC_HC0);
|
|
hc_cfg |= VF610_ADC_CONV_DISABLE;
|
|
writel(hc_cfg, info->regs + VF610_REG_ADC_HC0);
|
|
|
|
clk_disable_unprepare(info->clk);
|
|
regulator_disable(info->vref);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vf610_adc_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct vf610_adc *info = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = regulator_enable(info->vref);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(info->clk);
|
|
if (ret)
|
|
goto disable_reg;
|
|
|
|
vf610_adc_hw_init(info);
|
|
|
|
return 0;
|
|
|
|
disable_reg:
|
|
regulator_disable(info->vref);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(vf610_adc_pm_ops, vf610_adc_suspend, vf610_adc_resume);
|
|
|
|
static struct platform_driver vf610_adc_driver = {
|
|
.probe = vf610_adc_probe,
|
|
.remove = vf610_adc_remove,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.of_match_table = vf610_adc_match,
|
|
.pm = &vf610_adc_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(vf610_adc_driver);
|
|
|
|
MODULE_AUTHOR("Fugang Duan <B38611@freescale.com>");
|
|
MODULE_DESCRIPTION("Freescale VF610 ADC driver");
|
|
MODULE_LICENSE("GPL v2");
|