WSL2-Linux-Kernel

История

Kees Cook f5912cc19a char/mwave: Adjust io port register size Using MKWORD() on a byte-sized variable results in OOB read. Expand the size of the reserved area so both MKWORD and MKBYTE continue to work without overflow. Silences this warning on a -Warray-bounds build: drivers/char/mwave/3780i.h:346:22: error: array subscript 'short unsigned int[0]' is partly outside array bounds of 'DSP_ISA_SLAVE_CONTROL[1]' [-Werror=array-bounds] 346 \| #define MKWORD(var) (((unsigned short )(&var))) \| ~^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/char/mwave/3780i.h:356:40: note: in definition of macro 'OutWordDsp' 356 \| #define OutWordDsp(index,value) outw(value,usDspBaseIO+index) \| ^~~~~ drivers/char/mwave/3780i.c:373:41: note: in expansion of macro 'MKWORD' 373 \| OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl)); \| ^~~~~~ drivers/char/mwave/3780i.c:358:31: note: while referencing 'rSlaveControl' 358 \| DSP_ISA_SLAVE_CONTROL rSlaveControl; \| ^~~~~~~~~~~~~ Fixes: `1da177e4c3` ("Linux-2.6.12-rc2") Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20211203084206.3104326-1-keescook@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2021-12-03 14:27:06 +01:00
..
3780i.c	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
3780i.h	char/mwave: Adjust io port register size	2021-12-03 14:27:06 +01:00
Makefile	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
README	char: change to new flag variable	2011-03-17 14:02:59 +01:00
mwavedd.c	char: mwave: remove unneeded break	2020-11-09 16:05:09 +01:00
mwavedd.h	Replace <asm/uaccess.h> with <linux/uaccess.h> globally	2016-12-24 11:46:01 -08:00
mwavepub.h	[PATCH] mwave: missing __user in ioctl struct declaration	2005-12-15 10:04:31 -08:00
smapi.c	char/mwave: remove redundant initialization of variable bRC	2020-07-10 14:50:51 +02:00
smapi.h	char/mwave: remove custom BOOLEAN type	2016-08-31 14:22:49 +02:00
tp3780i.c	char: mware: fix returnvar.cocci warnings	2021-08-27 16:20:37 +02:00
tp3780i.h	char/mwave: turn tp3780I_Cleanup() into void function	2021-03-24 08:26:30 +01:00

README

Module options
--------------

The mwave module takes the following options.  Note that these options
are not saved by the BIOS and so do not persist after unload and reload.

  mwave_debug=value, where value is bitwise OR of trace flags:
	0x0001 mwavedd api tracing
	0x0002 smapi api tracing
	0x0004 3780i tracing
	0x0008 tp3780i tracing

        Tracing only occurs if the driver has been compiled with the
        MW_TRACE macro #defined  (i.e. let ccflags-y := -DMW_TRACE
        in the Makefile).

  mwave_3780i_irq=5/7/10/11/15
	If the dsp irq has not been setup and stored in bios by the 
	thinkpad configuration utility then this parameter allows the
	irq used by the dsp to be configured.

  mwave_3780i_io=0x130/0x350/0x0070/0xDB0
	If the dsp io range has not been setup and stored in bios by the 
	thinkpad configuration utility then this parameter allows the
	io range used by the dsp to be configured.

  mwave_uart_irq=3/4
	If the mwave's uart irq has not been setup and stored in bios by the 
	thinkpad configuration utility then this parameter allows the
	irq used by the mwave uart to be configured.

  mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8
	If the uart io range has not been setup and stored in bios by the 
	thinkpad configuration utility then this parameter allows the
	io range used by the mwave uart to be configured.

Example to enable the 3780i DSP using ttyS1 resources:
	
  insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8

Accessing the driver
--------------------

You must also create a node for the driver:
  mkdir -p /dev/modems
  mknod --mode=660 /dev/modems/mwave c 10 219