WSL2-Linux-Kernel/include/uapi/drm/msm_drm.h

370 строки
14 KiB
C

/*
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef __MSM_DRM_H__
#define __MSM_DRM_H__
#include "drm.h"
#if defined(__cplusplus)
extern "C" {
#endif
/* Please note that modifications to all structs defined here are
* subject to backwards-compatibility constraints:
* 1) Do not use pointers, use __u64 instead for 32 bit / 64 bit
* user/kernel compatibility
* 2) Keep fields aligned to their size
* 3) Because of how drm_ioctl() works, we can add new fields at
* the end of an ioctl if some care is taken: drm_ioctl() will
* zero out the new fields at the tail of the ioctl, so a zero
* value should have a backwards compatible meaning. And for
* output params, userspace won't see the newly added output
* fields.. so that has to be somehow ok.
*/
#define MSM_PIPE_NONE 0x00
#define MSM_PIPE_2D0 0x01
#define MSM_PIPE_2D1 0x02
#define MSM_PIPE_3D0 0x10
/* The pipe-id just uses the lower bits, so can be OR'd with flags in
* the upper 16 bits (which could be extended further, if needed, maybe
* we extend/overload the pipe-id some day to deal with multiple rings,
* but even then I don't think we need the full lower 16 bits).
*/
#define MSM_PIPE_ID_MASK 0xffff
#define MSM_PIPE_ID(x) ((x) & MSM_PIPE_ID_MASK)
#define MSM_PIPE_FLAGS(x) ((x) & ~MSM_PIPE_ID_MASK)
/* timeouts are specified in clock-monotonic absolute times (to simplify
* restarting interrupted ioctls). The following struct is logically the
* same as 'struct timespec' but 32/64b ABI safe.
*/
struct drm_msm_timespec {
__s64 tv_sec; /* seconds */
__s64 tv_nsec; /* nanoseconds */
};
#define MSM_PARAM_GPU_ID 0x01
#define MSM_PARAM_GMEM_SIZE 0x02
#define MSM_PARAM_CHIP_ID 0x03
#define MSM_PARAM_MAX_FREQ 0x04
#define MSM_PARAM_TIMESTAMP 0x05
#define MSM_PARAM_GMEM_BASE 0x06
#define MSM_PARAM_PRIORITIES 0x07 /* The # of priority levels */
#define MSM_PARAM_PP_PGTABLE 0x08 /* => 1 for per-process pagetables, else 0 */
#define MSM_PARAM_FAULTS 0x09
#define MSM_PARAM_SUSPENDS 0x0a
/* For backwards compat. The original support for preemption was based on
* a single ring per priority level so # of priority levels equals the #
* of rings. With drm/scheduler providing additional levels of priority,
* the number of priorities is greater than the # of rings. The param is
* renamed to better reflect this.
*/
#define MSM_PARAM_NR_RINGS MSM_PARAM_PRIORITIES
struct drm_msm_param {
__u32 pipe; /* in, MSM_PIPE_x */
__u32 param; /* in, MSM_PARAM_x */
__u64 value; /* out (get_param) or in (set_param) */
};
/*
* GEM buffers:
*/
#define MSM_BO_SCANOUT 0x00000001 /* scanout capable */
#define MSM_BO_GPU_READONLY 0x00000002
#define MSM_BO_CACHE_MASK 0x000f0000
/* cache modes */
#define MSM_BO_CACHED 0x00010000
#define MSM_BO_WC 0x00020000
#define MSM_BO_UNCACHED 0x00040000 /* deprecated, use MSM_BO_WC */
#define MSM_BO_CACHED_COHERENT 0x080000
#define MSM_BO_FLAGS (MSM_BO_SCANOUT | \
MSM_BO_GPU_READONLY | \
MSM_BO_CACHE_MASK)
struct drm_msm_gem_new {
__u64 size; /* in */
__u32 flags; /* in, mask of MSM_BO_x */
__u32 handle; /* out */
};
/* Get or set GEM buffer info. The requested value can be passed
* directly in 'value', or for data larger than 64b 'value' is a
* pointer to userspace buffer, with 'len' specifying the number of
* bytes copied into that buffer. For info returned by pointer,
* calling the GEM_INFO ioctl with null 'value' will return the
* required buffer size in 'len'
*/
#define MSM_INFO_GET_OFFSET 0x00 /* get mmap() offset, returned by value */
#define MSM_INFO_GET_IOVA 0x01 /* get iova, returned by value */
#define MSM_INFO_SET_NAME 0x02 /* set the debug name (by pointer) */
#define MSM_INFO_GET_NAME 0x03 /* get debug name, returned by pointer */
struct drm_msm_gem_info {
__u32 handle; /* in */
__u32 info; /* in - one of MSM_INFO_* */
__u64 value; /* in or out */
__u32 len; /* in or out */
__u32 pad;
};
#define MSM_PREP_READ 0x01
#define MSM_PREP_WRITE 0x02
#define MSM_PREP_NOSYNC 0x04
#define MSM_PREP_FLAGS (MSM_PREP_READ | MSM_PREP_WRITE | MSM_PREP_NOSYNC)
struct drm_msm_gem_cpu_prep {
__u32 handle; /* in */
__u32 op; /* in, mask of MSM_PREP_x */
struct drm_msm_timespec timeout; /* in */
};
struct drm_msm_gem_cpu_fini {
__u32 handle; /* in */
};
/*
* Cmdstream Submission:
*/
/* The value written into the cmdstream is logically:
*
* ((relocbuf->gpuaddr + reloc_offset) << shift) | or
*
* When we have GPU's w/ >32bit ptrs, it should be possible to deal
* with this by emit'ing two reloc entries with appropriate shift
* values. Or a new MSM_SUBMIT_CMD_x type would also be an option.
*
* NOTE that reloc's must be sorted by order of increasing submit_offset,
* otherwise EINVAL.
*/
struct drm_msm_gem_submit_reloc {
__u32 submit_offset; /* in, offset from submit_bo */
__u32 or; /* in, value OR'd with result */
__s32 shift; /* in, amount of left shift (can be negative) */
__u32 reloc_idx; /* in, index of reloc_bo buffer */
__u64 reloc_offset; /* in, offset from start of reloc_bo */
};
/* submit-types:
* BUF - this cmd buffer is executed normally.
* IB_TARGET_BUF - this cmd buffer is an IB target. Reloc's are
* processed normally, but the kernel does not setup an IB to
* this buffer in the first-level ringbuffer
* CTX_RESTORE_BUF - only executed if there has been a GPU context
* switch since the last SUBMIT ioctl
*/
#define MSM_SUBMIT_CMD_BUF 0x0001
#define MSM_SUBMIT_CMD_IB_TARGET_BUF 0x0002
#define MSM_SUBMIT_CMD_CTX_RESTORE_BUF 0x0003
struct drm_msm_gem_submit_cmd {
__u32 type; /* in, one of MSM_SUBMIT_CMD_x */
__u32 submit_idx; /* in, index of submit_bo cmdstream buffer */
__u32 submit_offset; /* in, offset into submit_bo */
__u32 size; /* in, cmdstream size */
__u32 pad;
__u32 nr_relocs; /* in, number of submit_reloc's */
__u64 relocs; /* in, ptr to array of submit_reloc's */
};
/* Each buffer referenced elsewhere in the cmdstream submit (ie. the
* cmdstream buffer(s) themselves or reloc entries) has one (and only
* one) entry in the submit->bos[] table.
*
* As a optimization, the current buffer (gpu virtual address) can be
* passed back through the 'presumed' field. If on a subsequent reloc,
* userspace passes back a 'presumed' address that is still valid,
* then patching the cmdstream for this entry is skipped. This can
* avoid kernel needing to map/access the cmdstream bo in the common
* case.
*/
#define MSM_SUBMIT_BO_READ 0x0001
#define MSM_SUBMIT_BO_WRITE 0x0002
#define MSM_SUBMIT_BO_DUMP 0x0004
#define MSM_SUBMIT_BO_FLAGS (MSM_SUBMIT_BO_READ | \
MSM_SUBMIT_BO_WRITE | \
MSM_SUBMIT_BO_DUMP)
struct drm_msm_gem_submit_bo {
__u32 flags; /* in, mask of MSM_SUBMIT_BO_x */
__u32 handle; /* in, GEM handle */
__u64 presumed; /* in/out, presumed buffer address */
};
/* Valid submit ioctl flags: */
#define MSM_SUBMIT_NO_IMPLICIT 0x80000000 /* disable implicit sync */
#define MSM_SUBMIT_FENCE_FD_IN 0x40000000 /* enable input fence_fd */
#define MSM_SUBMIT_FENCE_FD_OUT 0x20000000 /* enable output fence_fd */
#define MSM_SUBMIT_SUDO 0x10000000 /* run submitted cmds from RB */
#define MSM_SUBMIT_SYNCOBJ_IN 0x08000000 /* enable input syncobj */
#define MSM_SUBMIT_SYNCOBJ_OUT 0x04000000 /* enable output syncobj */
#define MSM_SUBMIT_FLAGS ( \
MSM_SUBMIT_NO_IMPLICIT | \
MSM_SUBMIT_FENCE_FD_IN | \
MSM_SUBMIT_FENCE_FD_OUT | \
MSM_SUBMIT_SUDO | \
MSM_SUBMIT_SYNCOBJ_IN | \
MSM_SUBMIT_SYNCOBJ_OUT | \
0)
#define MSM_SUBMIT_SYNCOBJ_RESET 0x00000001 /* Reset syncobj after wait. */
#define MSM_SUBMIT_SYNCOBJ_FLAGS ( \
MSM_SUBMIT_SYNCOBJ_RESET | \
0)
struct drm_msm_gem_submit_syncobj {
__u32 handle; /* in, syncobj handle. */
__u32 flags; /* in, from MSM_SUBMIT_SYNCOBJ_FLAGS */
__u64 point; /* in, timepoint for timeline syncobjs. */
};
/* Each cmdstream submit consists of a table of buffers involved, and
* one or more cmdstream buffers. This allows for conditional execution
* (context-restore), and IB buffers needed for per tile/bin draw cmds.
*/
struct drm_msm_gem_submit {
__u32 flags; /* MSM_PIPE_x | MSM_SUBMIT_x */
__u32 fence; /* out */
__u32 nr_bos; /* in, number of submit_bo's */
__u32 nr_cmds; /* in, number of submit_cmd's */
__u64 bos; /* in, ptr to array of submit_bo's */
__u64 cmds; /* in, ptr to array of submit_cmd's */
__s32 fence_fd; /* in/out fence fd (see MSM_SUBMIT_FENCE_FD_IN/OUT) */
__u32 queueid; /* in, submitqueue id */
__u64 in_syncobjs; /* in, ptr to array of drm_msm_gem_submit_syncobj */
__u64 out_syncobjs; /* in, ptr to array of drm_msm_gem_submit_syncobj */
__u32 nr_in_syncobjs; /* in, number of entries in in_syncobj */
__u32 nr_out_syncobjs; /* in, number of entries in out_syncobj. */
__u32 syncobj_stride; /* in, stride of syncobj arrays. */
__u32 pad; /*in, reserved for future use, always 0. */
};
/* The normal way to synchronize with the GPU is just to CPU_PREP on
* a buffer if you need to access it from the CPU (other cmdstream
* submission from same or other contexts, PAGE_FLIP ioctl, etc, all
* handle the required synchronization under the hood). This ioctl
* mainly just exists as a way to implement the gallium pipe_fence
* APIs without requiring a dummy bo to synchronize on.
*/
struct drm_msm_wait_fence {
__u32 fence; /* in */
__u32 pad;
struct drm_msm_timespec timeout; /* in */
__u32 queueid; /* in, submitqueue id */
};
/* madvise provides a way to tell the kernel in case a buffers contents
* can be discarded under memory pressure, which is useful for userspace
* bo cache where we want to optimistically hold on to buffer allocate
* and potential mmap, but allow the pages to be discarded under memory
* pressure.
*
* Typical usage would involve madvise(DONTNEED) when buffer enters BO
* cache, and madvise(WILLNEED) if trying to recycle buffer from BO cache.
* In the WILLNEED case, 'retained' indicates to userspace whether the
* backing pages still exist.
*/
#define MSM_MADV_WILLNEED 0 /* backing pages are needed, status returned in 'retained' */
#define MSM_MADV_DONTNEED 1 /* backing pages not needed */
#define __MSM_MADV_PURGED 2 /* internal state */
struct drm_msm_gem_madvise {
__u32 handle; /* in, GEM handle */
__u32 madv; /* in, MSM_MADV_x */
__u32 retained; /* out, whether backing store still exists */
};
/*
* Draw queues allow the user to set specific submission parameter. Command
* submissions specify a specific submitqueue to use. ID 0 is reserved for
* backwards compatibility as a "default" submitqueue
*/
#define MSM_SUBMITQUEUE_FLAGS (0)
/*
* The submitqueue priority should be between 0 and MSM_PARAM_PRIORITIES-1,
* a lower numeric value is higher priority.
*/
struct drm_msm_submitqueue {
__u32 flags; /* in, MSM_SUBMITQUEUE_x */
__u32 prio; /* in, Priority level */
__u32 id; /* out, identifier */
};
#define MSM_SUBMITQUEUE_PARAM_FAULTS 0
struct drm_msm_submitqueue_query {
__u64 data;
__u32 id;
__u32 param;
__u32 len;
__u32 pad;
};
#define DRM_MSM_GET_PARAM 0x00
/* placeholder:
#define DRM_MSM_SET_PARAM 0x01
*/
#define DRM_MSM_GEM_NEW 0x02
#define DRM_MSM_GEM_INFO 0x03
#define DRM_MSM_GEM_CPU_PREP 0x04
#define DRM_MSM_GEM_CPU_FINI 0x05
#define DRM_MSM_GEM_SUBMIT 0x06
#define DRM_MSM_WAIT_FENCE 0x07
#define DRM_MSM_GEM_MADVISE 0x08
/* placeholder:
#define DRM_MSM_GEM_SVM_NEW 0x09
*/
#define DRM_MSM_SUBMITQUEUE_NEW 0x0A
#define DRM_MSM_SUBMITQUEUE_CLOSE 0x0B
#define DRM_MSM_SUBMITQUEUE_QUERY 0x0C
#define DRM_IOCTL_MSM_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GET_PARAM, struct drm_msm_param)
#define DRM_IOCTL_MSM_GEM_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_NEW, struct drm_msm_gem_new)
#define DRM_IOCTL_MSM_GEM_INFO DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_INFO, struct drm_msm_gem_info)
#define DRM_IOCTL_MSM_GEM_CPU_PREP DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_PREP, struct drm_msm_gem_cpu_prep)
#define DRM_IOCTL_MSM_GEM_CPU_FINI DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_GEM_CPU_FINI, struct drm_msm_gem_cpu_fini)
#define DRM_IOCTL_MSM_GEM_SUBMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_SUBMIT, struct drm_msm_gem_submit)
#define DRM_IOCTL_MSM_WAIT_FENCE DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_WAIT_FENCE, struct drm_msm_wait_fence)
#define DRM_IOCTL_MSM_GEM_MADVISE DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_GEM_MADVISE, struct drm_msm_gem_madvise)
#define DRM_IOCTL_MSM_SUBMITQUEUE_NEW DRM_IOWR(DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_NEW, struct drm_msm_submitqueue)
#define DRM_IOCTL_MSM_SUBMITQUEUE_CLOSE DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_CLOSE, __u32)
#define DRM_IOCTL_MSM_SUBMITQUEUE_QUERY DRM_IOW (DRM_COMMAND_BASE + DRM_MSM_SUBMITQUEUE_QUERY, struct drm_msm_submitqueue_query)
#if defined(__cplusplus)
}
#endif
#endif /* __MSM_DRM_H__ */