WSL2-Linux-Kernel/drivers/hwtracing/coresight/coresight-cti-platform.c

491 строка
13 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2019, The Linaro Limited. All rights reserved.
*/
#include <linux/coresight.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/property.h>
#include <linux/slab.h>
#include <dt-bindings/arm/coresight-cti-dt.h>
#include "coresight-cti.h"
#include "coresight-priv.h"
/* Number of CTI signals in the v8 architecturally defined connection */
#define NR_V8PE_IN_SIGS 2
#define NR_V8PE_OUT_SIGS 3
#define NR_V8ETM_INOUT_SIGS 4
/* CTI device tree trigger connection node keyword */
#define CTI_DT_CONNS "trig-conns"
/* CTI device tree connection property keywords */
#define CTI_DT_V8ARCH_COMPAT "arm,coresight-cti-v8-arch"
#define CTI_DT_CSDEV_ASSOC "arm,cs-dev-assoc"
#define CTI_DT_TRIGIN_SIGS "arm,trig-in-sigs"
#define CTI_DT_TRIGOUT_SIGS "arm,trig-out-sigs"
#define CTI_DT_TRIGIN_TYPES "arm,trig-in-types"
#define CTI_DT_TRIGOUT_TYPES "arm,trig-out-types"
#define CTI_DT_FILTER_OUT_SIGS "arm,trig-filters"
#define CTI_DT_CONN_NAME "arm,trig-conn-name"
#define CTI_DT_CTM_ID "arm,cti-ctm-id"
#ifdef CONFIG_OF
/*
* CTI can be bound to a CPU, or a system device.
* CPU can be declared at the device top level or in a connections node
* so need to check relative to node not device.
*/
static int of_cti_get_cpu_at_node(const struct device_node *node)
{
int cpu;
struct device_node *dn;
if (node == NULL)
return -1;
dn = of_parse_phandle(node, "cpu", 0);
/* CTI affinity defaults to no cpu */
if (!dn)
return -1;
cpu = of_cpu_node_to_id(dn);
of_node_put(dn);
/* No Affinity if no cpu nodes are found */
return (cpu < 0) ? -1 : cpu;
}
#else
static int of_cti_get_cpu_at_node(const struct device_node *node)
{
return -1;
}
#endif
/*
* CTI can be bound to a CPU, or a system device.
* CPU can be declared at the device top level or in a connections node
* so need to check relative to node not device.
*/
static int cti_plat_get_cpu_at_node(struct fwnode_handle *fwnode)
{
if (is_of_node(fwnode))
return of_cti_get_cpu_at_node(to_of_node(fwnode));
return -1;
}
const char *cti_plat_get_node_name(struct fwnode_handle *fwnode)
{
if (is_of_node(fwnode))
return of_node_full_name(to_of_node(fwnode));
return "unknown";
}
/*
* Extract a name from the fwnode.
* If the device associated with the node is a coresight_device, then return
* that name and the coresight_device pointer, otherwise return the node name.
*/
static const char *
cti_plat_get_csdev_or_node_name(struct fwnode_handle *fwnode,
struct coresight_device **csdev)
{
const char *name = NULL;
*csdev = coresight_find_csdev_by_fwnode(fwnode);
if (*csdev)
name = dev_name(&(*csdev)->dev);
else
name = cti_plat_get_node_name(fwnode);
return name;
}
static bool cti_plat_node_name_eq(struct fwnode_handle *fwnode,
const char *name)
{
if (is_of_node(fwnode))
return of_node_name_eq(to_of_node(fwnode), name);
return false;
}
static int cti_plat_create_v8_etm_connection(struct device *dev,
struct cti_drvdata *drvdata)
{
int ret = -ENOMEM, i;
struct fwnode_handle *root_fwnode, *cs_fwnode;
const char *assoc_name = NULL;
struct coresight_device *csdev;
struct cti_trig_con *tc = NULL;
root_fwnode = dev_fwnode(dev);
if (IS_ERR_OR_NULL(root_fwnode))
return -EINVAL;
/* Can optionally have an etm node - return if not */
cs_fwnode = fwnode_find_reference(root_fwnode, CTI_DT_CSDEV_ASSOC, 0);
if (IS_ERR(cs_fwnode))
return 0;
/* allocate memory */
tc = cti_allocate_trig_con(dev, NR_V8ETM_INOUT_SIGS,
NR_V8ETM_INOUT_SIGS);
if (!tc)
goto create_v8_etm_out;
/* build connection data */
tc->con_in->used_mask = 0xF0; /* sigs <4,5,6,7> */
tc->con_out->used_mask = 0xF0; /* sigs <4,5,6,7> */
/*
* The EXTOUT type signals from the ETM are connected to a set of input
* triggers on the CTI, the EXTIN being connected to output triggers.
*/
for (i = 0; i < NR_V8ETM_INOUT_SIGS; i++) {
tc->con_in->sig_types[i] = ETM_EXTOUT;
tc->con_out->sig_types[i] = ETM_EXTIN;
}
/*
* We look to see if the ETM coresight device associated with this
* handle has been registered with the system - i.e. probed before
* this CTI. If so csdev will be non NULL and we can use the device
* name and pass the csdev to the connection entry function where
* the association will be recorded.
* If not, then simply record the name in the connection data, the
* probing of the ETM will call into the CTI driver API to update the
* association then.
*/
assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode, &csdev);
ret = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name);
create_v8_etm_out:
fwnode_handle_put(cs_fwnode);
return ret;
}
/*
* Create an architecturally defined v8 connection
* must have a cpu, can have an ETM.
*/
static int cti_plat_create_v8_connections(struct device *dev,
struct cti_drvdata *drvdata)
{
struct cti_device *cti_dev = &drvdata->ctidev;
struct cti_trig_con *tc = NULL;
int cpuid = 0;
char cpu_name_str[16];
int ret = -ENOMEM;
/* Must have a cpu node */
cpuid = cti_plat_get_cpu_at_node(dev_fwnode(dev));
if (cpuid < 0) {
dev_warn(dev,
"ARM v8 architectural CTI connection: missing cpu\n");
return -EINVAL;
}
cti_dev->cpu = cpuid;
/* Allocate the v8 cpu connection memory */
tc = cti_allocate_trig_con(dev, NR_V8PE_IN_SIGS, NR_V8PE_OUT_SIGS);
if (!tc)
goto of_create_v8_out;
/* Set the v8 PE CTI connection data */
tc->con_in->used_mask = 0x3; /* sigs <0 1> */
tc->con_in->sig_types[0] = PE_DBGTRIGGER;
tc->con_in->sig_types[1] = PE_PMUIRQ;
tc->con_out->used_mask = 0x7; /* sigs <0 1 2 > */
tc->con_out->sig_types[0] = PE_EDBGREQ;
tc->con_out->sig_types[1] = PE_DBGRESTART;
tc->con_out->sig_types[2] = PE_CTIIRQ;
scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid);
ret = cti_add_connection_entry(dev, drvdata, tc, NULL, cpu_name_str);
if (ret)
goto of_create_v8_out;
/* Create the v8 ETM associated connection */
ret = cti_plat_create_v8_etm_connection(dev, drvdata);
if (ret)
goto of_create_v8_out;
/* filter pe_edbgreq - PE trigout sig <0> */
drvdata->config.trig_out_filter |= 0x1;
of_create_v8_out:
return ret;
}
static int cti_plat_check_v8_arch_compatible(struct device *dev)
{
struct fwnode_handle *fwnode = dev_fwnode(dev);
if (is_of_node(fwnode))
return of_device_is_compatible(to_of_node(fwnode),
CTI_DT_V8ARCH_COMPAT);
return 0;
}
static int cti_plat_count_sig_elements(const struct fwnode_handle *fwnode,
const char *name)
{
int nr_elem = fwnode_property_count_u32(fwnode, name);
return (nr_elem < 0 ? 0 : nr_elem);
}
static int cti_plat_read_trig_group(struct cti_trig_grp *tgrp,
const struct fwnode_handle *fwnode,
const char *grp_name)
{
int idx, err = 0;
u32 *values;
if (!tgrp->nr_sigs)
return 0;
values = kcalloc(tgrp->nr_sigs, sizeof(u32), GFP_KERNEL);
if (!values)
return -ENOMEM;
err = fwnode_property_read_u32_array(fwnode, grp_name,
values, tgrp->nr_sigs);
if (!err) {
/* set the signal usage mask */
for (idx = 0; idx < tgrp->nr_sigs; idx++)
tgrp->used_mask |= BIT(values[idx]);
}
kfree(values);
return err;
}
static int cti_plat_read_trig_types(struct cti_trig_grp *tgrp,
const struct fwnode_handle *fwnode,
const char *type_name)
{
int items, err = 0, nr_sigs;
u32 *values = NULL, i;
/* allocate an array according to number of signals in connection */
nr_sigs = tgrp->nr_sigs;
if (!nr_sigs)
return 0;
/* see if any types have been included in the device description */
items = cti_plat_count_sig_elements(fwnode, type_name);
if (items > nr_sigs)
return -EINVAL;
/* need an array to store the values iff there are any */
if (items) {
values = kcalloc(items, sizeof(u32), GFP_KERNEL);
if (!values)
return -ENOMEM;
err = fwnode_property_read_u32_array(fwnode, type_name,
values, items);
if (err)
goto read_trig_types_out;
}
/*
* Match type id to signal index, 1st type to 1st index etc.
* If fewer types than signals default remainder to GEN_IO.
*/
for (i = 0; i < nr_sigs; i++) {
if (i < items) {
tgrp->sig_types[i] =
values[i] < CTI_TRIG_MAX ? values[i] : GEN_IO;
} else {
tgrp->sig_types[i] = GEN_IO;
}
}
read_trig_types_out:
kfree(values);
return err;
}
static int cti_plat_process_filter_sigs(struct cti_drvdata *drvdata,
const struct fwnode_handle *fwnode)
{
struct cti_trig_grp *tg = NULL;
int err = 0, nr_filter_sigs;
nr_filter_sigs = cti_plat_count_sig_elements(fwnode,
CTI_DT_FILTER_OUT_SIGS);
if (nr_filter_sigs == 0)
return 0;
if (nr_filter_sigs > drvdata->config.nr_trig_max)
return -EINVAL;
tg = kzalloc(sizeof(*tg), GFP_KERNEL);
if (!tg)
return -ENOMEM;
err = cti_plat_read_trig_group(tg, fwnode, CTI_DT_FILTER_OUT_SIGS);
if (!err)
drvdata->config.trig_out_filter |= tg->used_mask;
kfree(tg);
return err;
}
static int cti_plat_create_connection(struct device *dev,
struct cti_drvdata *drvdata,
struct fwnode_handle *fwnode)
{
struct cti_trig_con *tc = NULL;
int cpuid = -1, err = 0;
struct coresight_device *csdev = NULL;
const char *assoc_name = "unknown";
char cpu_name_str[16];
int nr_sigs_in, nr_sigs_out;
/* look to see how many in and out signals we have */
nr_sigs_in = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGIN_SIGS);
nr_sigs_out = cti_plat_count_sig_elements(fwnode, CTI_DT_TRIGOUT_SIGS);
if ((nr_sigs_in > drvdata->config.nr_trig_max) ||
(nr_sigs_out > drvdata->config.nr_trig_max))
return -EINVAL;
tc = cti_allocate_trig_con(dev, nr_sigs_in, nr_sigs_out);
if (!tc)
return -ENOMEM;
/* look for the signals properties. */
err = cti_plat_read_trig_group(tc->con_in, fwnode,
CTI_DT_TRIGIN_SIGS);
if (err)
goto create_con_err;
err = cti_plat_read_trig_types(tc->con_in, fwnode,
CTI_DT_TRIGIN_TYPES);
if (err)
goto create_con_err;
err = cti_plat_read_trig_group(tc->con_out, fwnode,
CTI_DT_TRIGOUT_SIGS);
if (err)
goto create_con_err;
err = cti_plat_read_trig_types(tc->con_out, fwnode,
CTI_DT_TRIGOUT_TYPES);
if (err)
goto create_con_err;
err = cti_plat_process_filter_sigs(drvdata, fwnode);
if (err)
goto create_con_err;
/* read the connection name if set - may be overridden by later */
fwnode_property_read_string(fwnode, CTI_DT_CONN_NAME, &assoc_name);
/* associated cpu ? */
cpuid = cti_plat_get_cpu_at_node(fwnode);
if (cpuid >= 0) {
drvdata->ctidev.cpu = cpuid;
scnprintf(cpu_name_str, sizeof(cpu_name_str), "cpu%d", cpuid);
assoc_name = cpu_name_str;
} else {
/* associated device ? */
struct fwnode_handle *cs_fwnode = fwnode_find_reference(fwnode,
CTI_DT_CSDEV_ASSOC,
0);
if (!IS_ERR(cs_fwnode)) {
assoc_name = cti_plat_get_csdev_or_node_name(cs_fwnode,
&csdev);
fwnode_handle_put(cs_fwnode);
}
}
/* set up a connection */
err = cti_add_connection_entry(dev, drvdata, tc, csdev, assoc_name);
create_con_err:
return err;
}
static int cti_plat_create_impdef_connections(struct device *dev,
struct cti_drvdata *drvdata)
{
int rc = 0;
struct fwnode_handle *fwnode = dev_fwnode(dev);
struct fwnode_handle *child = NULL;
if (IS_ERR_OR_NULL(fwnode))
return -EINVAL;
fwnode_for_each_child_node(fwnode, child) {
if (cti_plat_node_name_eq(child, CTI_DT_CONNS))
rc = cti_plat_create_connection(dev, drvdata,
child);
if (rc != 0)
break;
}
fwnode_handle_put(child);
return rc;
}
/* get the hardware configuration & connection data. */
static int cti_plat_get_hw_data(struct device *dev, struct cti_drvdata *drvdata)
{
int rc = 0;
struct cti_device *cti_dev = &drvdata->ctidev;
/* get any CTM ID - defaults to 0 */
device_property_read_u32(dev, CTI_DT_CTM_ID, &cti_dev->ctm_id);
/* check for a v8 architectural CTI device */
if (cti_plat_check_v8_arch_compatible(dev))
rc = cti_plat_create_v8_connections(dev, drvdata);
else
rc = cti_plat_create_impdef_connections(dev, drvdata);
if (rc)
return rc;
/* if no connections, just add a single default based on max IN-OUT */
if (cti_dev->nr_trig_con == 0)
rc = cti_add_default_connection(dev, drvdata);
return rc;
}
struct coresight_platform_data *
coresight_cti_get_platform_data(struct device *dev)
{
int ret = -ENOENT;
struct coresight_platform_data *pdata = NULL;
struct fwnode_handle *fwnode = dev_fwnode(dev);
struct cti_drvdata *drvdata = dev_get_drvdata(dev);
if (IS_ERR_OR_NULL(fwnode))
goto error;
/*
* Alloc platform data but leave it zero init. CTI does not use the
* same connection infrastructuree as trace path components but an
* empty struct enables us to use the standard coresight component
* registration code.
*/
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
ret = -ENOMEM;
goto error;
}
/* get some CTI specifics */
ret = cti_plat_get_hw_data(dev, drvdata);
if (!ret)
return pdata;
error:
return ERR_PTR(ret);
}