WSL2-Linux-Kernel/drivers/net/phy
Johan Hovold d0e1df9cf4 net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
Use generic config_init callback also for KSZ8021 and KSZ8031.

This has been avoided this far due to commit b838b4aced ("phy/micrel:
KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY
becomes unresponsive if the broadcast-disable flag is set before
configuring the clock mode.

Turns out that the problem seemingly worked-around by the above
mentioned commit was really due to a hardware-configuration issue, where
the PHY was in fact strapped to address 3 rather than 0.

Tested-by: Bruno Thomsen <bth@kamstrup.dk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-26 16:19:50 -05:00
..
Kconfig net: Allow FIXED_PHY to be modular. 2014-12-16 15:02:23 -05:00
Makefile net: Allow FIXED_PHY to be modular. 2014-12-16 15:02:23 -05:00
amd-xgbe-phy.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
amd.c net: phy: replace phy_driver_register calls 2014-11-12 13:52:53 -05:00
at803x.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
bcm7xxx.c net: phy: bcm7xxx: add an explicit version check for GPHY rev G0 2014-12-08 21:33:29 -05:00
bcm63xx.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
bcm87xx.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
broadcom.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
cicada.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
davicom.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
dp83640.c net: ptp: fix time stamp matching logic for VLAN packets. 2014-11-12 15:06:17 -05:00
dp83640_reg.h ptp: Added a clock driver for the National Semiconductor PHYTER. 2011-05-23 13:10:23 -07:00
et1011c.c net: phy: replace phy_driver_register calls 2014-11-12 13:52:53 -05:00
fixed_phy.c net: Allow FIXED_PHY to be modular. 2014-12-16 15:02:23 -05:00
icplus.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
lxt.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
marvell.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
mdio-bcm-unimac.c net: phy: drop owner assignment from platform_drivers 2014-10-20 16:21:15 +02:00
mdio-bitbang.c Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free" 2012-11-14 22:32:15 -05:00
mdio-gpio.c net: phy: drop owner assignment from platform_drivers 2014-10-20 16:21:15 +02:00
mdio-moxart.c drivers/net: delete non-required instances of include <linux/init.h> 2014-01-16 11:53:26 -08:00
mdio-mux-gpio.c Driver core patches for 3.19-rc1 2014-12-14 16:10:09 -08:00
mdio-mux-mmioreg.c net: phy: drop owner assignment from platform_drivers 2014-10-20 16:21:15 +02:00
mdio-mux.c netdev/phy: skip disabled mdio-mux nodes 2012-08-20 02:16:00 -07:00
mdio-octeon.c net: phy: drop owner assignment from platform_drivers 2014-10-20 16:21:15 +02:00
mdio-sun4i.c net: sun4i: remove empty MDIO bus reset function 2014-03-28 01:38:02 -04:00
mdio_bus.c net: phy: properly report internal PHYs through sysfs 2014-08-29 20:17:53 -07:00
micrel.c net: phy: micrel: use generic config_init for KSZ8021/KSZ8031 2014-12-26 16:19:50 -05:00
national.c net: phy: replace phy_driver_register calls 2014-11-12 13:52:53 -05:00
phy.c net: phy: Correctly handle MII ioctl which changes autonegotiation. 2014-11-11 16:21:26 -05:00
phy_device.c phylib: use MDIO_DEVS[12] 2014-08-22 21:16:51 -07:00
qsemi.c net: phy: replace phy_driver_register calls 2014-11-12 13:52:53 -05:00
realtek.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
smsc.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
spi_ks8995.c net: phy: spi_ks8995: remove sysfs bin file by registered attribute 2014-11-04 17:18:45 -05:00
ste10Xp.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00
vitesse.c net: phy: replace phy_drivers_register calls 2014-11-12 13:52:53 -05:00