WSL2-Linux-Kernel/arch/powerpc/boot/div64.S

108 строки
3.1 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Divide a 64-bit unsigned number by a 32-bit unsigned number.
* This routine assumes that the top 32 bits of the dividend are
* non-zero to start with.
* On entry, r3 points to the dividend, which get overwritten with
* the 64-bit quotient, and r4 contains the divisor.
* On exit, r3 contains the remainder.
*
* Copyright (C) 2002 Paul Mackerras, IBM Corp.
*/
#include "ppc_asm.h"
.globl __div64_32
__div64_32:
lwz r5,0(r3) # get the dividend into r5/r6
lwz r6,4(r3)
cmplw r5,r4
li r7,0
li r8,0
blt 1f
divwu r7,r5,r4 # if dividend.hi >= divisor,
mullw r0,r7,r4 # quotient.hi = dividend.hi / divisor
subf. r5,r0,r5 # dividend.hi %= divisor
beq 3f
1: mr r11,r5 # here dividend.hi != 0
andis. r0,r5,0xc000
bne 2f
cntlzw r0,r5 # we are shifting the dividend right
li r10,-1 # to make it < 2^32, and shifting
srw r10,r10,r0 # the divisor right the same amount,
addc r9,r4,r10 # rounding up (so the estimate cannot
andc r11,r6,r10 # ever be too large, only too small)
andc r9,r9,r10
addze r9,r9
or r11,r5,r11
rotlw r9,r9,r0
rotlw r11,r11,r0
divwu r11,r11,r9 # then we divide the shifted quantities
2: mullw r10,r11,r4 # to get an estimate of the quotient,
mulhwu r9,r11,r4 # multiply the estimate by the divisor,
subfc r6,r10,r6 # take the product from the divisor,
add r8,r8,r11 # and add the estimate to the accumulated
subfe. r5,r9,r5 # quotient
bne 1b
3: cmplw r6,r4
blt 4f
divwu r0,r6,r4 # perform the remaining 32-bit division
mullw r10,r0,r4 # and get the remainder
add r8,r8,r0
subf r6,r10,r6
4: stw r7,0(r3) # return the quotient in *r3
stw r8,4(r3)
mr r3,r6 # return the remainder in r3
blr
/*
* Extended precision shifts.
*
* Updated to be valid for shift counts from 0 to 63 inclusive.
* -- Gabriel
*
* R3/R4 has 64 bit value
* R5 has shift count
* result in R3/R4
*
* ashrdi3: arithmetic right shift (sign propagation)
* lshrdi3: logical right shift
* ashldi3: left shift
*/
.globl __ashrdi3
__ashrdi3:
subfic r6,r5,32
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
addi r7,r5,32 # could be xori, or addi with -32
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0
sraw r7,r3,r7 # t2 = MSW >> (count-32)
or r4,r4,r6 # LSW |= t1
slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2
sraw r3,r3,r5 # MSW = MSW >> count
or r4,r4,r7 # LSW |= t2
blr
.globl __ashldi3
__ashldi3:
subfic r6,r5,32
slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count
addi r7,r5,32 # could be xori, or addi with -32
srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count)
slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32)
or r3,r3,r6 # MSW |= t1
slw r4,r4,r5 # LSW = LSW << count
or r3,r3,r7 # MSW |= t2
blr
.globl __lshrdi3
__lshrdi3:
subfic r6,r5,32
srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count
addi r7,r5,32 # could be xori, or addi with -32
slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count)
srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32)
or r4,r4,r6 # LSW |= t1
srw r3,r3,r5 # MSW = MSW >> count
or r4,r4,r7 # LSW |= t2
blr