186 строки
5.4 KiB
C
186 строки
5.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright 2021 NXP
|
|
*/
|
|
#include <linux/pcs/pcs-xpcs.h>
|
|
#include "pcs-xpcs.h"
|
|
|
|
/* LANE_DRIVER1_0 register */
|
|
#define SJA1110_LANE_DRIVER1_0 0x8038
|
|
#define SJA1110_TXDRV(x) (((x) << 12) & GENMASK(14, 12))
|
|
|
|
/* LANE_DRIVER2_0 register */
|
|
#define SJA1110_LANE_DRIVER2_0 0x803a
|
|
#define SJA1110_TXDRVTRIM_LSB(x) ((x) & GENMASK_ULL(15, 0))
|
|
|
|
/* LANE_DRIVER2_1 register */
|
|
#define SJA1110_LANE_DRIVER2_1 0x803b
|
|
#define SJA1110_LANE_DRIVER2_1_RSV BIT(9)
|
|
#define SJA1110_TXDRVTRIM_MSB(x) (((x) & GENMASK_ULL(23, 16)) >> 16)
|
|
|
|
/* LANE_TRIM register */
|
|
#define SJA1110_LANE_TRIM 0x8040
|
|
#define SJA1110_TXTEN BIT(11)
|
|
#define SJA1110_TXRTRIM(x) (((x) << 8) & GENMASK(10, 8))
|
|
#define SJA1110_TXPLL_BWSEL BIT(7)
|
|
#define SJA1110_RXTEN BIT(6)
|
|
#define SJA1110_RXRTRIM(x) (((x) << 3) & GENMASK(5, 3))
|
|
#define SJA1110_CDR_GAIN BIT(2)
|
|
#define SJA1110_ACCOUPLE_RXVCM_EN BIT(0)
|
|
|
|
/* LANE_DATAPATH_1 register */
|
|
#define SJA1110_LANE_DATAPATH_1 0x8037
|
|
|
|
/* POWERDOWN_ENABLE register */
|
|
#define SJA1110_POWERDOWN_ENABLE 0x8041
|
|
#define SJA1110_TXPLL_PD BIT(12)
|
|
#define SJA1110_TXPD BIT(11)
|
|
#define SJA1110_RXPKDETEN BIT(10)
|
|
#define SJA1110_RXCH_PD BIT(9)
|
|
#define SJA1110_RXBIAS_PD BIT(8)
|
|
#define SJA1110_RESET_SER_EN BIT(7)
|
|
#define SJA1110_RESET_SER BIT(6)
|
|
#define SJA1110_RESET_DES BIT(5)
|
|
#define SJA1110_RCVEN BIT(4)
|
|
|
|
/* RXPLL_CTRL0 register */
|
|
#define SJA1110_RXPLL_CTRL0 0x8065
|
|
#define SJA1110_RXPLL_FBDIV(x) (((x) << 2) & GENMASK(9, 2))
|
|
|
|
/* RXPLL_CTRL1 register */
|
|
#define SJA1110_RXPLL_CTRL1 0x8066
|
|
#define SJA1110_RXPLL_REFDIV(x) ((x) & GENMASK(4, 0))
|
|
|
|
/* TXPLL_CTRL0 register */
|
|
#define SJA1110_TXPLL_CTRL0 0x806d
|
|
#define SJA1110_TXPLL_FBDIV(x) ((x) & GENMASK(11, 0))
|
|
|
|
/* TXPLL_CTRL1 register */
|
|
#define SJA1110_TXPLL_CTRL1 0x806e
|
|
#define SJA1110_TXPLL_REFDIV(x) ((x) & GENMASK(5, 0))
|
|
|
|
/* RX_DATA_DETECT register */
|
|
#define SJA1110_RX_DATA_DETECT 0x8045
|
|
|
|
/* RX_CDR_CTLE register */
|
|
#define SJA1110_RX_CDR_CTLE 0x8042
|
|
|
|
/* In NXP SJA1105, the PCS is integrated with a PMA that has the TX lane
|
|
* polarity inverted by default (PLUS is MINUS, MINUS is PLUS). To obtain
|
|
* normal non-inverted behavior, the TX lane polarity must be inverted in the
|
|
* PCS, via the DIGITAL_CONTROL_2 register.
|
|
*/
|
|
int nxp_sja1105_sgmii_pma_config(struct dw_xpcs *xpcs)
|
|
{
|
|
return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL2,
|
|
DW_VR_MII_DIG_CTRL2_TX_POL_INV);
|
|
}
|
|
|
|
static int nxp_sja1110_pma_config(struct dw_xpcs *xpcs,
|
|
u16 txpll_fbdiv, u16 txpll_refdiv,
|
|
u16 rxpll_fbdiv, u16 rxpll_refdiv,
|
|
u16 rx_cdr_ctle)
|
|
{
|
|
u16 val;
|
|
int ret;
|
|
|
|
/* Program TX PLL feedback divider and reference divider settings for
|
|
* correct oscillation frequency.
|
|
*/
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL0,
|
|
SJA1110_TXPLL_FBDIV(txpll_fbdiv));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_TXPLL_CTRL1,
|
|
SJA1110_TXPLL_REFDIV(txpll_refdiv));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Program transmitter amplitude and disable amplitude trimming */
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER1_0,
|
|
SJA1110_TXDRV(0x5));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = SJA1110_TXDRVTRIM_LSB(0xffffffull);
|
|
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER2_0, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = SJA1110_TXDRVTRIM_MSB(0xffffffull) | SJA1110_LANE_DRIVER2_1_RSV;
|
|
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DRIVER2_1, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Enable input and output resistor terminations for low BER. */
|
|
val = SJA1110_ACCOUPLE_RXVCM_EN | SJA1110_CDR_GAIN |
|
|
SJA1110_RXRTRIM(4) | SJA1110_RXTEN | SJA1110_TXPLL_BWSEL |
|
|
SJA1110_TXRTRIM(3) | SJA1110_TXTEN;
|
|
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_TRIM, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Select PCS as transmitter data source. */
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_LANE_DATAPATH_1, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Program RX PLL feedback divider and reference divider for correct
|
|
* oscillation frequency.
|
|
*/
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL0,
|
|
SJA1110_RXPLL_FBDIV(rxpll_fbdiv));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RXPLL_CTRL1,
|
|
SJA1110_RXPLL_REFDIV(rxpll_refdiv));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Program threshold for receiver signal detector.
|
|
* Enable control of RXPLL by receiver signal detector to disable RXPLL
|
|
* when an input signal is not present.
|
|
*/
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RX_DATA_DETECT, 0x0005);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Enable TX and RX PLLs and circuits.
|
|
* Release reset of PMA to enable data flow to/from PCS.
|
|
*/
|
|
ret = xpcs_read(xpcs, MDIO_MMD_VEND2, SJA1110_POWERDOWN_ENABLE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = ret & ~(SJA1110_TXPLL_PD | SJA1110_TXPD | SJA1110_RXCH_PD |
|
|
SJA1110_RXBIAS_PD | SJA1110_RESET_SER_EN |
|
|
SJA1110_RESET_SER | SJA1110_RESET_DES);
|
|
val |= SJA1110_RXPKDETEN | SJA1110_RCVEN;
|
|
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_POWERDOWN_ENABLE, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Program continuous-time linear equalizer (CTLE) settings. */
|
|
ret = xpcs_write(xpcs, MDIO_MMD_VEND2, SJA1110_RX_CDR_CTLE,
|
|
rx_cdr_ctle);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int nxp_sja1110_sgmii_pma_config(struct dw_xpcs *xpcs)
|
|
{
|
|
return nxp_sja1110_pma_config(xpcs, 0x19, 0x1, 0x19, 0x1, 0x212a);
|
|
}
|
|
|
|
int nxp_sja1110_2500basex_pma_config(struct dw_xpcs *xpcs)
|
|
{
|
|
return nxp_sja1110_pma_config(xpcs, 0x7d, 0x2, 0x7d, 0x2, 0x732a);
|
|
}
|