316 строки
7.3 KiB
C
316 строки
7.3 KiB
C
/* radio-aztech.c - Aztech radio card driver for Linux 2.2
|
|
*
|
|
* Adapted to support the Video for Linux API by
|
|
* Russell Kroll <rkroll@exploits.org>. Based on original tuner code by:
|
|
*
|
|
* Quay Ly
|
|
* Donald Song
|
|
* Jason Lewis (jlewis@twilight.vtc.vsc.edu)
|
|
* Scott McGrath (smcgrath@twilight.vtc.vsc.edu)
|
|
* William McGrath (wmcgrath@twilight.vtc.vsc.edu)
|
|
*
|
|
* The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/
|
|
* along with more information on the card itself.
|
|
*
|
|
* History:
|
|
* 1999-02-24 Russell Kroll <rkroll@exploits.org>
|
|
* Fine tuning/VIDEO_TUNER_LOW
|
|
* Range expanded to 87-108 MHz (from 87.9-107.8)
|
|
*
|
|
* Notable changes from the original source:
|
|
* - includes stripped down to the essentials
|
|
* - for loops used as delays replaced with udelay()
|
|
* - #defines removed, changed to static values
|
|
* - tuning structure changed - no more character arrays, other changes
|
|
*/
|
|
|
|
#include <linux/module.h> /* Modules */
|
|
#include <linux/init.h> /* Initdata */
|
|
#include <linux/ioport.h> /* check_region, request_region */
|
|
#include <linux/delay.h> /* udelay */
|
|
#include <asm/io.h> /* outb, outb_p */
|
|
#include <asm/uaccess.h> /* copy to/from user */
|
|
#include <linux/videodev.h> /* kernel radio structs */
|
|
#include <linux/config.h> /* CONFIG_RADIO_AZTECH_PORT */
|
|
|
|
/* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
|
|
|
|
#ifndef CONFIG_RADIO_AZTECH_PORT
|
|
#define CONFIG_RADIO_AZTECH_PORT -1
|
|
#endif
|
|
|
|
static int io = CONFIG_RADIO_AZTECH_PORT;
|
|
static int radio_nr = -1;
|
|
static int radio_wait_time = 1000;
|
|
static struct semaphore lock;
|
|
|
|
struct az_device
|
|
{
|
|
int curvol;
|
|
unsigned long curfreq;
|
|
int stereo;
|
|
};
|
|
|
|
static int volconvert(int level)
|
|
{
|
|
level>>=14; /* Map 16bits down to 2 bit */
|
|
level&=3;
|
|
|
|
/* convert to card-friendly values */
|
|
switch (level)
|
|
{
|
|
case 0:
|
|
return 0;
|
|
case 1:
|
|
return 1;
|
|
case 2:
|
|
return 4;
|
|
case 3:
|
|
return 5;
|
|
}
|
|
return 0; /* Quieten gcc */
|
|
}
|
|
|
|
static void send_0_byte (struct az_device *dev)
|
|
{
|
|
udelay(radio_wait_time);
|
|
outb_p(2+volconvert(dev->curvol), io);
|
|
outb_p(64+2+volconvert(dev->curvol), io);
|
|
}
|
|
|
|
static void send_1_byte (struct az_device *dev)
|
|
{
|
|
udelay (radio_wait_time);
|
|
outb_p(128+2+volconvert(dev->curvol), io);
|
|
outb_p(128+64+2+volconvert(dev->curvol), io);
|
|
}
|
|
|
|
static int az_setvol(struct az_device *dev, int vol)
|
|
{
|
|
down(&lock);
|
|
outb (volconvert(vol), io);
|
|
up(&lock);
|
|
return 0;
|
|
}
|
|
|
|
/* thanks to Michael Dwyer for giving me a dose of clues in
|
|
* the signal strength department..
|
|
*
|
|
* This card has a stereo bit - bit 0 set = mono, not set = stereo
|
|
* It also has a "signal" bit - bit 1 set = bad signal, not set = good
|
|
*
|
|
*/
|
|
|
|
static int az_getsigstr(struct az_device *dev)
|
|
{
|
|
if (inb(io) & 2) /* bit set = no signal present */
|
|
return 0;
|
|
return 1; /* signal present */
|
|
}
|
|
|
|
static int az_getstereo(struct az_device *dev)
|
|
{
|
|
if (inb(io) & 1) /* bit set = mono */
|
|
return 0;
|
|
return 1; /* stereo */
|
|
}
|
|
|
|
static int az_setfreq(struct az_device *dev, unsigned long frequency)
|
|
{
|
|
int i;
|
|
|
|
frequency += 171200; /* Add 10.7 MHz IF */
|
|
frequency /= 800; /* Convert to 50 kHz units */
|
|
|
|
down(&lock);
|
|
|
|
send_0_byte (dev); /* 0: LSB of frequency */
|
|
|
|
for (i = 0; i < 13; i++) /* : frequency bits (1-13) */
|
|
if (frequency & (1 << i))
|
|
send_1_byte (dev);
|
|
else
|
|
send_0_byte (dev);
|
|
|
|
send_0_byte (dev); /* 14: test bit - always 0 */
|
|
send_0_byte (dev); /* 15: test bit - always 0 */
|
|
send_0_byte (dev); /* 16: band data 0 - always 0 */
|
|
if (dev->stereo) /* 17: stereo (1 to enable) */
|
|
send_1_byte (dev);
|
|
else
|
|
send_0_byte (dev);
|
|
|
|
send_1_byte (dev); /* 18: band data 1 - unknown */
|
|
send_0_byte (dev); /* 19: time base - always 0 */
|
|
send_0_byte (dev); /* 20: spacing (0 = 25 kHz) */
|
|
send_1_byte (dev); /* 21: spacing (1 = 25 kHz) */
|
|
send_0_byte (dev); /* 22: spacing (0 = 25 kHz) */
|
|
send_1_byte (dev); /* 23: AM/FM (FM = 1, always) */
|
|
|
|
/* latch frequency */
|
|
|
|
udelay (radio_wait_time);
|
|
outb_p(128+64+volconvert(dev->curvol), io);
|
|
|
|
up(&lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int az_do_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, void *arg)
|
|
{
|
|
struct video_device *dev = video_devdata(file);
|
|
struct az_device *az = dev->priv;
|
|
|
|
switch(cmd)
|
|
{
|
|
case VIDIOCGCAP:
|
|
{
|
|
struct video_capability *v = arg;
|
|
memset(v,0,sizeof(*v));
|
|
v->type=VID_TYPE_TUNER;
|
|
v->channels=1;
|
|
v->audios=1;
|
|
strcpy(v->name, "Aztech Radio");
|
|
return 0;
|
|
}
|
|
case VIDIOCGTUNER:
|
|
{
|
|
struct video_tuner *v = arg;
|
|
if(v->tuner) /* Only 1 tuner */
|
|
return -EINVAL;
|
|
v->rangelow=(87*16000);
|
|
v->rangehigh=(108*16000);
|
|
v->flags=VIDEO_TUNER_LOW;
|
|
v->mode=VIDEO_MODE_AUTO;
|
|
v->signal=0xFFFF*az_getsigstr(az);
|
|
if(az_getstereo(az))
|
|
v->flags|=VIDEO_TUNER_STEREO_ON;
|
|
strcpy(v->name, "FM");
|
|
return 0;
|
|
}
|
|
case VIDIOCSTUNER:
|
|
{
|
|
struct video_tuner *v = arg;
|
|
if(v->tuner!=0)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
case VIDIOCGFREQ:
|
|
{
|
|
unsigned long *freq = arg;
|
|
*freq = az->curfreq;
|
|
return 0;
|
|
}
|
|
case VIDIOCSFREQ:
|
|
{
|
|
unsigned long *freq = arg;
|
|
az->curfreq = *freq;
|
|
az_setfreq(az, az->curfreq);
|
|
return 0;
|
|
}
|
|
case VIDIOCGAUDIO:
|
|
{
|
|
struct video_audio *v = arg;
|
|
memset(v,0, sizeof(*v));
|
|
v->flags|=VIDEO_AUDIO_MUTABLE|VIDEO_AUDIO_VOLUME;
|
|
if(az->stereo)
|
|
v->mode=VIDEO_SOUND_STEREO;
|
|
else
|
|
v->mode=VIDEO_SOUND_MONO;
|
|
v->volume=az->curvol;
|
|
v->step=16384;
|
|
strcpy(v->name, "Radio");
|
|
return 0;
|
|
}
|
|
case VIDIOCSAUDIO:
|
|
{
|
|
struct video_audio *v = arg;
|
|
if(v->audio)
|
|
return -EINVAL;
|
|
az->curvol=v->volume;
|
|
|
|
az->stereo=(v->mode&VIDEO_SOUND_STEREO)?1:0;
|
|
if(v->flags&VIDEO_AUDIO_MUTE)
|
|
az_setvol(az,0);
|
|
else
|
|
az_setvol(az,az->curvol);
|
|
return 0;
|
|
}
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
}
|
|
|
|
static int az_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
return video_usercopy(inode, file, cmd, arg, az_do_ioctl);
|
|
}
|
|
|
|
static struct az_device aztech_unit;
|
|
|
|
static struct file_operations aztech_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = video_exclusive_open,
|
|
.release = video_exclusive_release,
|
|
.ioctl = az_ioctl,
|
|
.llseek = no_llseek,
|
|
};
|
|
|
|
static struct video_device aztech_radio=
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.name = "Aztech radio",
|
|
.type = VID_TYPE_TUNER,
|
|
.hardware = VID_HARDWARE_AZTECH,
|
|
.fops = &aztech_fops,
|
|
};
|
|
|
|
static int __init aztech_init(void)
|
|
{
|
|
if(io==-1)
|
|
{
|
|
printk(KERN_ERR "You must set an I/O address with io=0x???\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!request_region(io, 2, "aztech"))
|
|
{
|
|
printk(KERN_ERR "aztech: port 0x%x already in use\n", io);
|
|
return -EBUSY;
|
|
}
|
|
|
|
init_MUTEX(&lock);
|
|
aztech_radio.priv=&aztech_unit;
|
|
|
|
if(video_register_device(&aztech_radio, VFL_TYPE_RADIO, radio_nr)==-1)
|
|
{
|
|
release_region(io,2);
|
|
return -EINVAL;
|
|
}
|
|
|
|
printk(KERN_INFO "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n");
|
|
/* mute card - prevents noisy bootups */
|
|
outb (0, io);
|
|
return 0;
|
|
}
|
|
|
|
MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
|
|
MODULE_DESCRIPTION("A driver for the Aztech radio card.");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(io, int, 0);
|
|
module_param(radio_nr, int, 0);
|
|
MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)");
|
|
|
|
static void __exit aztech_cleanup(void)
|
|
{
|
|
video_unregister_device(&aztech_radio);
|
|
release_region(io,2);
|
|
}
|
|
|
|
module_init(aztech_init);
|
|
module_exit(aztech_cleanup);
|