882 строки
21 KiB
C
882 строки
21 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Driver for the Diolan DLN-2 USB-SPI adapter
|
|
*
|
|
* Copyright (c) 2014 Intel Corporation
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mfd/dln2.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#define DLN2_SPI_MODULE_ID 0x02
|
|
#define DLN2_SPI_CMD(cmd) DLN2_CMD(cmd, DLN2_SPI_MODULE_ID)
|
|
|
|
/* SPI commands */
|
|
#define DLN2_SPI_GET_PORT_COUNT DLN2_SPI_CMD(0x00)
|
|
#define DLN2_SPI_ENABLE DLN2_SPI_CMD(0x11)
|
|
#define DLN2_SPI_DISABLE DLN2_SPI_CMD(0x12)
|
|
#define DLN2_SPI_IS_ENABLED DLN2_SPI_CMD(0x13)
|
|
#define DLN2_SPI_SET_MODE DLN2_SPI_CMD(0x14)
|
|
#define DLN2_SPI_GET_MODE DLN2_SPI_CMD(0x15)
|
|
#define DLN2_SPI_SET_FRAME_SIZE DLN2_SPI_CMD(0x16)
|
|
#define DLN2_SPI_GET_FRAME_SIZE DLN2_SPI_CMD(0x17)
|
|
#define DLN2_SPI_SET_FREQUENCY DLN2_SPI_CMD(0x18)
|
|
#define DLN2_SPI_GET_FREQUENCY DLN2_SPI_CMD(0x19)
|
|
#define DLN2_SPI_READ_WRITE DLN2_SPI_CMD(0x1A)
|
|
#define DLN2_SPI_READ DLN2_SPI_CMD(0x1B)
|
|
#define DLN2_SPI_WRITE DLN2_SPI_CMD(0x1C)
|
|
#define DLN2_SPI_SET_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x20)
|
|
#define DLN2_SPI_GET_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x21)
|
|
#define DLN2_SPI_SET_DELAY_AFTER_SS DLN2_SPI_CMD(0x22)
|
|
#define DLN2_SPI_GET_DELAY_AFTER_SS DLN2_SPI_CMD(0x23)
|
|
#define DLN2_SPI_SET_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x24)
|
|
#define DLN2_SPI_GET_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x25)
|
|
#define DLN2_SPI_SET_SS DLN2_SPI_CMD(0x26)
|
|
#define DLN2_SPI_GET_SS DLN2_SPI_CMD(0x27)
|
|
#define DLN2_SPI_RELEASE_SS DLN2_SPI_CMD(0x28)
|
|
#define DLN2_SPI_SS_VARIABLE_ENABLE DLN2_SPI_CMD(0x2B)
|
|
#define DLN2_SPI_SS_VARIABLE_DISABLE DLN2_SPI_CMD(0x2C)
|
|
#define DLN2_SPI_SS_VARIABLE_IS_ENABLED DLN2_SPI_CMD(0x2D)
|
|
#define DLN2_SPI_SS_AAT_ENABLE DLN2_SPI_CMD(0x2E)
|
|
#define DLN2_SPI_SS_AAT_DISABLE DLN2_SPI_CMD(0x2F)
|
|
#define DLN2_SPI_SS_AAT_IS_ENABLED DLN2_SPI_CMD(0x30)
|
|
#define DLN2_SPI_SS_BETWEEN_FRAMES_ENABLE DLN2_SPI_CMD(0x31)
|
|
#define DLN2_SPI_SS_BETWEEN_FRAMES_DISABLE DLN2_SPI_CMD(0x32)
|
|
#define DLN2_SPI_SS_BETWEEN_FRAMES_IS_ENABLED DLN2_SPI_CMD(0x33)
|
|
#define DLN2_SPI_SET_CPHA DLN2_SPI_CMD(0x34)
|
|
#define DLN2_SPI_GET_CPHA DLN2_SPI_CMD(0x35)
|
|
#define DLN2_SPI_SET_CPOL DLN2_SPI_CMD(0x36)
|
|
#define DLN2_SPI_GET_CPOL DLN2_SPI_CMD(0x37)
|
|
#define DLN2_SPI_SS_MULTI_ENABLE DLN2_SPI_CMD(0x38)
|
|
#define DLN2_SPI_SS_MULTI_DISABLE DLN2_SPI_CMD(0x39)
|
|
#define DLN2_SPI_SS_MULTI_IS_ENABLED DLN2_SPI_CMD(0x3A)
|
|
#define DLN2_SPI_GET_SUPPORTED_MODES DLN2_SPI_CMD(0x40)
|
|
#define DLN2_SPI_GET_SUPPORTED_CPHA_VALUES DLN2_SPI_CMD(0x41)
|
|
#define DLN2_SPI_GET_SUPPORTED_CPOL_VALUES DLN2_SPI_CMD(0x42)
|
|
#define DLN2_SPI_GET_SUPPORTED_FRAME_SIZES DLN2_SPI_CMD(0x43)
|
|
#define DLN2_SPI_GET_SS_COUNT DLN2_SPI_CMD(0x44)
|
|
#define DLN2_SPI_GET_MIN_FREQUENCY DLN2_SPI_CMD(0x45)
|
|
#define DLN2_SPI_GET_MAX_FREQUENCY DLN2_SPI_CMD(0x46)
|
|
#define DLN2_SPI_GET_MIN_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x47)
|
|
#define DLN2_SPI_GET_MAX_DELAY_BETWEEN_SS DLN2_SPI_CMD(0x48)
|
|
#define DLN2_SPI_GET_MIN_DELAY_AFTER_SS DLN2_SPI_CMD(0x49)
|
|
#define DLN2_SPI_GET_MAX_DELAY_AFTER_SS DLN2_SPI_CMD(0x4A)
|
|
#define DLN2_SPI_GET_MIN_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x4B)
|
|
#define DLN2_SPI_GET_MAX_DELAY_BETWEEN_FRAMES DLN2_SPI_CMD(0x4C)
|
|
|
|
#define DLN2_SPI_MAX_XFER_SIZE 256
|
|
#define DLN2_SPI_BUF_SIZE (DLN2_SPI_MAX_XFER_SIZE + 16)
|
|
#define DLN2_SPI_ATTR_LEAVE_SS_LOW BIT(0)
|
|
#define DLN2_TRANSFERS_WAIT_COMPLETE 1
|
|
#define DLN2_TRANSFERS_CANCEL 0
|
|
#define DLN2_RPM_AUTOSUSPEND_TIMEOUT 2000
|
|
|
|
struct dln2_spi {
|
|
struct platform_device *pdev;
|
|
struct spi_master *master;
|
|
u8 port;
|
|
|
|
/*
|
|
* This buffer will be used mainly for read/write operations. Since
|
|
* they're quite large, we cannot use the stack. Protection is not
|
|
* needed because all SPI communication is serialized by the SPI core.
|
|
*/
|
|
void *buf;
|
|
|
|
u8 bpw;
|
|
u32 speed;
|
|
u16 mode;
|
|
u8 cs;
|
|
};
|
|
|
|
/*
|
|
* Enable/Disable SPI module. The disable command will wait for transfers to
|
|
* complete first.
|
|
*/
|
|
static int dln2_spi_enable(struct dln2_spi *dln2, bool enable)
|
|
{
|
|
u16 cmd;
|
|
struct {
|
|
u8 port;
|
|
u8 wait_for_completion;
|
|
} tx;
|
|
unsigned len = sizeof(tx);
|
|
|
|
tx.port = dln2->port;
|
|
|
|
if (enable) {
|
|
cmd = DLN2_SPI_ENABLE;
|
|
len -= sizeof(tx.wait_for_completion);
|
|
} else {
|
|
tx.wait_for_completion = DLN2_TRANSFERS_WAIT_COMPLETE;
|
|
cmd = DLN2_SPI_DISABLE;
|
|
}
|
|
|
|
return dln2_transfer_tx(dln2->pdev, cmd, &tx, len);
|
|
}
|
|
|
|
/*
|
|
* Select/unselect multiple CS lines. The selected lines will be automatically
|
|
* toggled LOW/HIGH by the board firmware during transfers, provided they're
|
|
* enabled first.
|
|
*
|
|
* Ex: cs_mask = 0x03 -> CS0 & CS1 will be selected and the next WR/RD operation
|
|
* will toggle the lines LOW/HIGH automatically.
|
|
*/
|
|
static int dln2_spi_cs_set(struct dln2_spi *dln2, u8 cs_mask)
|
|
{
|
|
struct {
|
|
u8 port;
|
|
u8 cs;
|
|
} tx;
|
|
|
|
tx.port = dln2->port;
|
|
|
|
/*
|
|
* According to Diolan docs, "a slave device can be selected by changing
|
|
* the corresponding bit value to 0". The rest must be set to 1. Hence
|
|
* the bitwise NOT in front.
|
|
*/
|
|
tx.cs = ~cs_mask;
|
|
|
|
return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_SS, &tx, sizeof(tx));
|
|
}
|
|
|
|
/*
|
|
* Select one CS line. The other lines will be un-selected.
|
|
*/
|
|
static int dln2_spi_cs_set_one(struct dln2_spi *dln2, u8 cs)
|
|
{
|
|
return dln2_spi_cs_set(dln2, BIT(cs));
|
|
}
|
|
|
|
/*
|
|
* Enable/disable CS lines for usage. The module has to be disabled first.
|
|
*/
|
|
static int dln2_spi_cs_enable(struct dln2_spi *dln2, u8 cs_mask, bool enable)
|
|
{
|
|
struct {
|
|
u8 port;
|
|
u8 cs;
|
|
} tx;
|
|
u16 cmd;
|
|
|
|
tx.port = dln2->port;
|
|
tx.cs = cs_mask;
|
|
cmd = enable ? DLN2_SPI_SS_MULTI_ENABLE : DLN2_SPI_SS_MULTI_DISABLE;
|
|
|
|
return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx));
|
|
}
|
|
|
|
static int dln2_spi_cs_enable_all(struct dln2_spi *dln2, bool enable)
|
|
{
|
|
u8 cs_mask = GENMASK(dln2->master->num_chipselect - 1, 0);
|
|
|
|
return dln2_spi_cs_enable(dln2, cs_mask, enable);
|
|
}
|
|
|
|
static int dln2_spi_get_cs_num(struct dln2_spi *dln2, u16 *cs_num)
|
|
{
|
|
int ret;
|
|
struct {
|
|
u8 port;
|
|
} tx;
|
|
struct {
|
|
__le16 cs_count;
|
|
} rx;
|
|
unsigned rx_len = sizeof(rx);
|
|
|
|
tx.port = dln2->port;
|
|
ret = dln2_transfer(dln2->pdev, DLN2_SPI_GET_SS_COUNT, &tx, sizeof(tx),
|
|
&rx, &rx_len);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (rx_len < sizeof(rx))
|
|
return -EPROTO;
|
|
|
|
*cs_num = le16_to_cpu(rx.cs_count);
|
|
|
|
dev_dbg(&dln2->pdev->dev, "cs_num = %d\n", *cs_num);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dln2_spi_get_speed(struct dln2_spi *dln2, u16 cmd, u32 *freq)
|
|
{
|
|
int ret;
|
|
struct {
|
|
u8 port;
|
|
} tx;
|
|
struct {
|
|
__le32 speed;
|
|
} rx;
|
|
unsigned rx_len = sizeof(rx);
|
|
|
|
tx.port = dln2->port;
|
|
|
|
ret = dln2_transfer(dln2->pdev, cmd, &tx, sizeof(tx), &rx, &rx_len);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (rx_len < sizeof(rx))
|
|
return -EPROTO;
|
|
|
|
*freq = le32_to_cpu(rx.speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Get bus min/max frequencies.
|
|
*/
|
|
static int dln2_spi_get_speed_range(struct dln2_spi *dln2, u32 *fmin, u32 *fmax)
|
|
{
|
|
int ret;
|
|
|
|
ret = dln2_spi_get_speed(dln2, DLN2_SPI_GET_MIN_FREQUENCY, fmin);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = dln2_spi_get_speed(dln2, DLN2_SPI_GET_MAX_FREQUENCY, fmax);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev_dbg(&dln2->pdev->dev, "freq_min = %d, freq_max = %d\n",
|
|
*fmin, *fmax);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the bus speed. The module will automatically round down to the closest
|
|
* available frequency and returns it. The module has to be disabled first.
|
|
*/
|
|
static int dln2_spi_set_speed(struct dln2_spi *dln2, u32 speed)
|
|
{
|
|
int ret;
|
|
struct {
|
|
u8 port;
|
|
__le32 speed;
|
|
} __packed tx;
|
|
struct {
|
|
__le32 speed;
|
|
} rx;
|
|
int rx_len = sizeof(rx);
|
|
|
|
tx.port = dln2->port;
|
|
tx.speed = cpu_to_le32(speed);
|
|
|
|
ret = dln2_transfer(dln2->pdev, DLN2_SPI_SET_FREQUENCY, &tx, sizeof(tx),
|
|
&rx, &rx_len);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (rx_len < sizeof(rx))
|
|
return -EPROTO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Change CPOL & CPHA. The module has to be disabled first.
|
|
*/
|
|
static int dln2_spi_set_mode(struct dln2_spi *dln2, u8 mode)
|
|
{
|
|
struct {
|
|
u8 port;
|
|
u8 mode;
|
|
} tx;
|
|
|
|
tx.port = dln2->port;
|
|
tx.mode = mode;
|
|
|
|
return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_MODE, &tx, sizeof(tx));
|
|
}
|
|
|
|
/*
|
|
* Change frame size. The module has to be disabled first.
|
|
*/
|
|
static int dln2_spi_set_bpw(struct dln2_spi *dln2, u8 bpw)
|
|
{
|
|
struct {
|
|
u8 port;
|
|
u8 bpw;
|
|
} tx;
|
|
|
|
tx.port = dln2->port;
|
|
tx.bpw = bpw;
|
|
|
|
return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_FRAME_SIZE,
|
|
&tx, sizeof(tx));
|
|
}
|
|
|
|
static int dln2_spi_get_supported_frame_sizes(struct dln2_spi *dln2,
|
|
u32 *bpw_mask)
|
|
{
|
|
int ret;
|
|
struct {
|
|
u8 port;
|
|
} tx;
|
|
struct {
|
|
u8 count;
|
|
u8 frame_sizes[36];
|
|
} *rx = dln2->buf;
|
|
unsigned rx_len = sizeof(*rx);
|
|
int i;
|
|
|
|
tx.port = dln2->port;
|
|
|
|
ret = dln2_transfer(dln2->pdev, DLN2_SPI_GET_SUPPORTED_FRAME_SIZES,
|
|
&tx, sizeof(tx), rx, &rx_len);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (rx_len < sizeof(*rx))
|
|
return -EPROTO;
|
|
if (rx->count > ARRAY_SIZE(rx->frame_sizes))
|
|
return -EPROTO;
|
|
|
|
*bpw_mask = 0;
|
|
for (i = 0; i < rx->count; i++)
|
|
*bpw_mask |= BIT(rx->frame_sizes[i] - 1);
|
|
|
|
dev_dbg(&dln2->pdev->dev, "bpw_mask = 0x%X\n", *bpw_mask);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Copy the data to DLN2 buffer and change the byte order to LE, requested by
|
|
* DLN2 module. SPI core makes sure that the data length is a multiple of word
|
|
* size.
|
|
*/
|
|
static int dln2_spi_copy_to_buf(u8 *dln2_buf, const u8 *src, u16 len, u8 bpw)
|
|
{
|
|
#ifdef __LITTLE_ENDIAN
|
|
memcpy(dln2_buf, src, len);
|
|
#else
|
|
if (bpw <= 8) {
|
|
memcpy(dln2_buf, src, len);
|
|
} else if (bpw <= 16) {
|
|
__le16 *d = (__le16 *)dln2_buf;
|
|
u16 *s = (u16 *)src;
|
|
|
|
len = len / 2;
|
|
while (len--)
|
|
*d++ = cpu_to_le16p(s++);
|
|
} else {
|
|
__le32 *d = (__le32 *)dln2_buf;
|
|
u32 *s = (u32 *)src;
|
|
|
|
len = len / 4;
|
|
while (len--)
|
|
*d++ = cpu_to_le32p(s++);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Copy the data from DLN2 buffer and convert to CPU byte order since the DLN2
|
|
* buffer is LE ordered. SPI core makes sure that the data length is a multiple
|
|
* of word size. The RX dln2_buf is 2 byte aligned so, for BE, we have to make
|
|
* sure we avoid unaligned accesses for 32 bit case.
|
|
*/
|
|
static int dln2_spi_copy_from_buf(u8 *dest, const u8 *dln2_buf, u16 len, u8 bpw)
|
|
{
|
|
#ifdef __LITTLE_ENDIAN
|
|
memcpy(dest, dln2_buf, len);
|
|
#else
|
|
if (bpw <= 8) {
|
|
memcpy(dest, dln2_buf, len);
|
|
} else if (bpw <= 16) {
|
|
u16 *d = (u16 *)dest;
|
|
__le16 *s = (__le16 *)dln2_buf;
|
|
|
|
len = len / 2;
|
|
while (len--)
|
|
*d++ = le16_to_cpup(s++);
|
|
} else {
|
|
u32 *d = (u32 *)dest;
|
|
__le32 *s = (__le32 *)dln2_buf;
|
|
|
|
len = len / 4;
|
|
while (len--)
|
|
*d++ = get_unaligned_le32(s++);
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Perform one write operation.
|
|
*/
|
|
static int dln2_spi_write_one(struct dln2_spi *dln2, const u8 *data,
|
|
u16 data_len, u8 attr)
|
|
{
|
|
struct {
|
|
u8 port;
|
|
__le16 size;
|
|
u8 attr;
|
|
u8 buf[DLN2_SPI_MAX_XFER_SIZE];
|
|
} __packed *tx = dln2->buf;
|
|
unsigned tx_len;
|
|
|
|
BUILD_BUG_ON(sizeof(*tx) > DLN2_SPI_BUF_SIZE);
|
|
|
|
if (data_len > DLN2_SPI_MAX_XFER_SIZE)
|
|
return -EINVAL;
|
|
|
|
tx->port = dln2->port;
|
|
tx->size = cpu_to_le16(data_len);
|
|
tx->attr = attr;
|
|
|
|
dln2_spi_copy_to_buf(tx->buf, data, data_len, dln2->bpw);
|
|
|
|
tx_len = sizeof(*tx) + data_len - DLN2_SPI_MAX_XFER_SIZE;
|
|
return dln2_transfer_tx(dln2->pdev, DLN2_SPI_WRITE, tx, tx_len);
|
|
}
|
|
|
|
/*
|
|
* Perform one read operation.
|
|
*/
|
|
static int dln2_spi_read_one(struct dln2_spi *dln2, u8 *data,
|
|
u16 data_len, u8 attr)
|
|
{
|
|
int ret;
|
|
struct {
|
|
u8 port;
|
|
__le16 size;
|
|
u8 attr;
|
|
} __packed tx;
|
|
struct {
|
|
__le16 size;
|
|
u8 buf[DLN2_SPI_MAX_XFER_SIZE];
|
|
} __packed *rx = dln2->buf;
|
|
unsigned rx_len = sizeof(*rx);
|
|
|
|
BUILD_BUG_ON(sizeof(*rx) > DLN2_SPI_BUF_SIZE);
|
|
|
|
if (data_len > DLN2_SPI_MAX_XFER_SIZE)
|
|
return -EINVAL;
|
|
|
|
tx.port = dln2->port;
|
|
tx.size = cpu_to_le16(data_len);
|
|
tx.attr = attr;
|
|
|
|
ret = dln2_transfer(dln2->pdev, DLN2_SPI_READ, &tx, sizeof(tx),
|
|
rx, &rx_len);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (rx_len < sizeof(rx->size) + data_len)
|
|
return -EPROTO;
|
|
if (le16_to_cpu(rx->size) != data_len)
|
|
return -EPROTO;
|
|
|
|
dln2_spi_copy_from_buf(data, rx->buf, data_len, dln2->bpw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Perform one write & read operation.
|
|
*/
|
|
static int dln2_spi_read_write_one(struct dln2_spi *dln2, const u8 *tx_data,
|
|
u8 *rx_data, u16 data_len, u8 attr)
|
|
{
|
|
int ret;
|
|
struct {
|
|
u8 port;
|
|
__le16 size;
|
|
u8 attr;
|
|
u8 buf[DLN2_SPI_MAX_XFER_SIZE];
|
|
} __packed *tx;
|
|
struct {
|
|
__le16 size;
|
|
u8 buf[DLN2_SPI_MAX_XFER_SIZE];
|
|
} __packed *rx;
|
|
unsigned tx_len, rx_len;
|
|
|
|
BUILD_BUG_ON(sizeof(*tx) > DLN2_SPI_BUF_SIZE ||
|
|
sizeof(*rx) > DLN2_SPI_BUF_SIZE);
|
|
|
|
if (data_len > DLN2_SPI_MAX_XFER_SIZE)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Since this is a pseudo full-duplex communication, we're perfectly
|
|
* safe to use the same buffer for both tx and rx. When DLN2 sends the
|
|
* response back, with the rx data, we don't need the tx buffer anymore.
|
|
*/
|
|
tx = dln2->buf;
|
|
rx = dln2->buf;
|
|
|
|
tx->port = dln2->port;
|
|
tx->size = cpu_to_le16(data_len);
|
|
tx->attr = attr;
|
|
|
|
dln2_spi_copy_to_buf(tx->buf, tx_data, data_len, dln2->bpw);
|
|
|
|
tx_len = sizeof(*tx) + data_len - DLN2_SPI_MAX_XFER_SIZE;
|
|
rx_len = sizeof(*rx);
|
|
|
|
ret = dln2_transfer(dln2->pdev, DLN2_SPI_READ_WRITE, tx, tx_len,
|
|
rx, &rx_len);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (rx_len < sizeof(rx->size) + data_len)
|
|
return -EPROTO;
|
|
if (le16_to_cpu(rx->size) != data_len)
|
|
return -EPROTO;
|
|
|
|
dln2_spi_copy_from_buf(rx_data, rx->buf, data_len, dln2->bpw);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Read/Write wrapper. It will automatically split an operation into multiple
|
|
* single ones due to device buffer constraints.
|
|
*/
|
|
static int dln2_spi_rdwr(struct dln2_spi *dln2, const u8 *tx_data,
|
|
u8 *rx_data, u16 data_len, u8 attr)
|
|
{
|
|
int ret;
|
|
u16 len;
|
|
u8 temp_attr;
|
|
u16 remaining = data_len;
|
|
u16 offset;
|
|
|
|
do {
|
|
if (remaining > DLN2_SPI_MAX_XFER_SIZE) {
|
|
len = DLN2_SPI_MAX_XFER_SIZE;
|
|
temp_attr = DLN2_SPI_ATTR_LEAVE_SS_LOW;
|
|
} else {
|
|
len = remaining;
|
|
temp_attr = attr;
|
|
}
|
|
|
|
offset = data_len - remaining;
|
|
|
|
if (tx_data && rx_data) {
|
|
ret = dln2_spi_read_write_one(dln2,
|
|
tx_data + offset,
|
|
rx_data + offset,
|
|
len, temp_attr);
|
|
} else if (tx_data) {
|
|
ret = dln2_spi_write_one(dln2,
|
|
tx_data + offset,
|
|
len, temp_attr);
|
|
} else if (rx_data) {
|
|
ret = dln2_spi_read_one(dln2,
|
|
rx_data + offset,
|
|
len, temp_attr);
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
remaining -= len;
|
|
} while (remaining);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dln2_spi_prepare_message(struct spi_master *master,
|
|
struct spi_message *message)
|
|
{
|
|
int ret;
|
|
struct dln2_spi *dln2 = spi_master_get_devdata(master);
|
|
struct spi_device *spi = message->spi;
|
|
|
|
if (dln2->cs != spi->chip_select) {
|
|
ret = dln2_spi_cs_set_one(dln2, spi->chip_select);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dln2->cs = spi->chip_select;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dln2_spi_transfer_setup(struct dln2_spi *dln2, u32 speed,
|
|
u8 bpw, u8 mode)
|
|
{
|
|
int ret;
|
|
bool bus_setup_change;
|
|
|
|
bus_setup_change = dln2->speed != speed || dln2->mode != mode ||
|
|
dln2->bpw != bpw;
|
|
|
|
if (!bus_setup_change)
|
|
return 0;
|
|
|
|
ret = dln2_spi_enable(dln2, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (dln2->speed != speed) {
|
|
ret = dln2_spi_set_speed(dln2, speed);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dln2->speed = speed;
|
|
}
|
|
|
|
if (dln2->mode != mode) {
|
|
ret = dln2_spi_set_mode(dln2, mode & 0x3);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dln2->mode = mode;
|
|
}
|
|
|
|
if (dln2->bpw != bpw) {
|
|
ret = dln2_spi_set_bpw(dln2, bpw);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dln2->bpw = bpw;
|
|
}
|
|
|
|
return dln2_spi_enable(dln2, true);
|
|
}
|
|
|
|
static int dln2_spi_transfer_one(struct spi_master *master,
|
|
struct spi_device *spi,
|
|
struct spi_transfer *xfer)
|
|
{
|
|
struct dln2_spi *dln2 = spi_master_get_devdata(master);
|
|
int status;
|
|
u8 attr = 0;
|
|
|
|
status = dln2_spi_transfer_setup(dln2, xfer->speed_hz,
|
|
xfer->bits_per_word,
|
|
spi->mode);
|
|
if (status < 0) {
|
|
dev_err(&dln2->pdev->dev, "Cannot setup transfer\n");
|
|
return status;
|
|
}
|
|
|
|
if (!xfer->cs_change && !spi_transfer_is_last(master, xfer))
|
|
attr = DLN2_SPI_ATTR_LEAVE_SS_LOW;
|
|
|
|
status = dln2_spi_rdwr(dln2, xfer->tx_buf, xfer->rx_buf,
|
|
xfer->len, attr);
|
|
if (status < 0)
|
|
dev_err(&dln2->pdev->dev, "write/read failed!\n");
|
|
|
|
return status;
|
|
}
|
|
|
|
static int dln2_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct dln2_spi *dln2;
|
|
struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*dln2));
|
|
if (!master)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
dln2 = spi_master_get_devdata(master);
|
|
|
|
dln2->buf = devm_kmalloc(&pdev->dev, DLN2_SPI_BUF_SIZE, GFP_KERNEL);
|
|
if (!dln2->buf) {
|
|
ret = -ENOMEM;
|
|
goto exit_free_master;
|
|
}
|
|
|
|
dln2->master = master;
|
|
dln2->master->dev.of_node = dev->of_node;
|
|
dln2->pdev = pdev;
|
|
dln2->port = pdata->port;
|
|
/* cs/mode can never be 0xff, so the first transfer will set them */
|
|
dln2->cs = 0xff;
|
|
dln2->mode = 0xff;
|
|
|
|
/* disable SPI module before continuing with the setup */
|
|
ret = dln2_spi_enable(dln2, false);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to disable SPI module\n");
|
|
goto exit_free_master;
|
|
}
|
|
|
|
ret = dln2_spi_get_cs_num(dln2, &master->num_chipselect);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to get number of CS pins\n");
|
|
goto exit_free_master;
|
|
}
|
|
|
|
ret = dln2_spi_get_speed_range(dln2,
|
|
&master->min_speed_hz,
|
|
&master->max_speed_hz);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to read bus min/max freqs\n");
|
|
goto exit_free_master;
|
|
}
|
|
|
|
ret = dln2_spi_get_supported_frame_sizes(dln2,
|
|
&master->bits_per_word_mask);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to read supported frame sizes\n");
|
|
goto exit_free_master;
|
|
}
|
|
|
|
ret = dln2_spi_cs_enable_all(dln2, true);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to enable CS pins\n");
|
|
goto exit_free_master;
|
|
}
|
|
|
|
master->bus_num = -1;
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA;
|
|
master->prepare_message = dln2_spi_prepare_message;
|
|
master->transfer_one = dln2_spi_transfer_one;
|
|
master->auto_runtime_pm = true;
|
|
|
|
/* enable SPI module, we're good to go */
|
|
ret = dln2_spi_enable(dln2, true);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to enable SPI module\n");
|
|
goto exit_free_master;
|
|
}
|
|
|
|
pm_runtime_set_autosuspend_delay(&pdev->dev,
|
|
DLN2_RPM_AUTOSUSPEND_TIMEOUT);
|
|
pm_runtime_use_autosuspend(&pdev->dev);
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
ret = devm_spi_register_master(&pdev->dev, master);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed to register master\n");
|
|
goto exit_register;
|
|
}
|
|
|
|
return ret;
|
|
|
|
exit_register:
|
|
pm_runtime_disable(&pdev->dev);
|
|
pm_runtime_set_suspended(&pdev->dev);
|
|
|
|
if (dln2_spi_enable(dln2, false) < 0)
|
|
dev_err(&pdev->dev, "Failed to disable SPI module\n");
|
|
exit_free_master:
|
|
spi_master_put(master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dln2_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct dln2_spi *dln2 = spi_master_get_devdata(master);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
if (dln2_spi_enable(dln2, false) < 0)
|
|
dev_err(&pdev->dev, "Failed to disable SPI module\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int dln2_spi_suspend(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct dln2_spi *dln2 = spi_master_get_devdata(master);
|
|
|
|
ret = spi_master_suspend(master);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!pm_runtime_suspended(dev)) {
|
|
ret = dln2_spi_enable(dln2, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* USB power may be cut off during sleep. Resetting the following
|
|
* parameters will force the board to be set up before first transfer.
|
|
*/
|
|
dln2->cs = 0xff;
|
|
dln2->speed = 0;
|
|
dln2->bpw = 0;
|
|
dln2->mode = 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dln2_spi_resume(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct dln2_spi *dln2 = spi_master_get_devdata(master);
|
|
|
|
if (!pm_runtime_suspended(dev)) {
|
|
ret = dln2_spi_cs_enable_all(dln2, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = dln2_spi_enable(dln2, true);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return spi_master_resume(master);
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
#ifdef CONFIG_PM
|
|
static int dln2_spi_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct dln2_spi *dln2 = spi_master_get_devdata(master);
|
|
|
|
return dln2_spi_enable(dln2, false);
|
|
}
|
|
|
|
static int dln2_spi_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct dln2_spi *dln2 = spi_master_get_devdata(master);
|
|
|
|
return dln2_spi_enable(dln2, true);
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static const struct dev_pm_ops dln2_spi_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(dln2_spi_suspend, dln2_spi_resume)
|
|
SET_RUNTIME_PM_OPS(dln2_spi_runtime_suspend,
|
|
dln2_spi_runtime_resume, NULL)
|
|
};
|
|
|
|
static struct platform_driver spi_dln2_driver = {
|
|
.driver = {
|
|
.name = "dln2-spi",
|
|
.pm = &dln2_spi_pm,
|
|
},
|
|
.probe = dln2_spi_probe,
|
|
.remove = dln2_spi_remove,
|
|
};
|
|
module_platform_driver(spi_dln2_driver);
|
|
|
|
MODULE_DESCRIPTION("Driver for the Diolan DLN2 SPI master interface");
|
|
MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:dln2-spi");
|