1156 строки
43 KiB
C
1156 строки
43 KiB
C
/*
|
|
* vendor/product IDs (VID/PID) of devices using FTDI USB serial converters.
|
|
* Please keep numerically sorted within individual areas, thanks!
|
|
*
|
|
* Philipp Gühring - pg@futureware.at - added the Device ID of the USB relais
|
|
* from Rudolf Gugler
|
|
*
|
|
*/
|
|
|
|
|
|
/**********************************/
|
|
/***** devices using FTDI VID *****/
|
|
/**********************************/
|
|
|
|
|
|
#define FTDI_VID 0x0403 /* Vendor Id */
|
|
|
|
|
|
/*** "original" FTDI device PIDs ***/
|
|
|
|
#define FTDI_8U232AM_PID 0x6001 /* Similar device to SIO above */
|
|
#define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
|
|
#define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
|
|
#define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
|
|
#define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */
|
|
#define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */
|
|
|
|
|
|
/*** third-party PIDs (using FTDI_VID) ***/
|
|
|
|
/*
|
|
* Marvell OpenRD Base, Client
|
|
* http://www.open-rd.org
|
|
* OpenRD Base, Client use VID 0x0403
|
|
*/
|
|
#define MARVELL_OPENRD_PID 0x9e90
|
|
|
|
/* www.candapter.com Ewert Energy Systems CANdapter device */
|
|
#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
|
|
|
|
#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
|
|
|
|
/* US Interface Navigator (http://www.usinterface.com/) */
|
|
#define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */
|
|
#define FTDI_USINT_WKEY_PID 0xb811 /* Navigator WKEY and FSK lines */
|
|
#define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */
|
|
|
|
/* OOCDlink by Joern Kaipf <joernk@web.de>
|
|
* (http://www.joernonline.de/) */
|
|
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
|
|
|
|
/* Luminary Micro Stellaris Boards, VID = FTDI_VID */
|
|
/* FTDI 2332C Dual channel device, side A=245 FIFO (JTAG), Side B=RS232 UART */
|
|
#define LMI_LM3S_DEVEL_BOARD_PID 0xbcd8
|
|
#define LMI_LM3S_EVAL_BOARD_PID 0xbcd9
|
|
|
|
#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmbH */
|
|
|
|
/* OpenDCC (www.opendcc.de) product id */
|
|
#define FTDI_OPENDCC_PID 0xBFD8
|
|
#define FTDI_OPENDCC_SNIFFER_PID 0xBFD9
|
|
#define FTDI_OPENDCC_THROTTLE_PID 0xBFDA
|
|
#define FTDI_OPENDCC_GATEWAY_PID 0xBFDB
|
|
#define FTDI_OPENDCC_GBM_PID 0xBFDC
|
|
|
|
/*
|
|
* RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com)
|
|
*/
|
|
#define FTDI_RRCIRKITS_LOCOBUFFER_PID 0xc7d0 /* LocoBuffer USB */
|
|
|
|
/* DMX4ALL DMX Interfaces */
|
|
#define FTDI_DMX4ALL 0xC850
|
|
|
|
/*
|
|
* ASK.fr devices
|
|
*/
|
|
#define FTDI_ASK_RDR400_PID 0xC991 /* ASK RDR 400 series card reader */
|
|
|
|
/* www.starting-point-systems.com µChameleon device */
|
|
#define FTDI_MICRO_CHAMELEON_PID 0xCAA0 /* Product Id */
|
|
|
|
/*
|
|
* Tactrix OpenPort (ECU) devices.
|
|
* OpenPort 1.3M submitted by Donour Sizemore.
|
|
* OpenPort 1.3S and 1.3U submitted by Ian Abbott.
|
|
*/
|
|
#define FTDI_TACTRIX_OPENPORT_13M_PID 0xCC48 /* OpenPort 1.3 Mitsubishi */
|
|
#define FTDI_TACTRIX_OPENPORT_13S_PID 0xCC49 /* OpenPort 1.3 Subaru */
|
|
#define FTDI_TACTRIX_OPENPORT_13U_PID 0xCC4A /* OpenPort 1.3 Universal */
|
|
|
|
/* SCS HF Radio Modems PID's (http://www.scs-ptc.com) */
|
|
/* the VID is the standard ftdi vid (FTDI_VID) */
|
|
#define FTDI_SCS_DEVICE_0_PID 0xD010 /* SCS PTC-IIusb */
|
|
#define FTDI_SCS_DEVICE_1_PID 0xD011 /* SCS Tracker / DSP TNC */
|
|
#define FTDI_SCS_DEVICE_2_PID 0xD012
|
|
#define FTDI_SCS_DEVICE_3_PID 0xD013
|
|
#define FTDI_SCS_DEVICE_4_PID 0xD014
|
|
#define FTDI_SCS_DEVICE_5_PID 0xD015
|
|
#define FTDI_SCS_DEVICE_6_PID 0xD016
|
|
#define FTDI_SCS_DEVICE_7_PID 0xD017
|
|
|
|
/* iPlus device */
|
|
#define FTDI_IPLUS_PID 0xD070 /* Product Id */
|
|
#define FTDI_IPLUS2_PID 0xD071 /* Product Id */
|
|
|
|
/*
|
|
* Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com.
|
|
*/
|
|
#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */
|
|
|
|
/* Propox devices */
|
|
#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
|
|
|
|
/* Lenz LI-USB Computer Interface. */
|
|
#define FTDI_LENZ_LIUSB_PID 0xD780
|
|
|
|
/* Vardaan Enterprises Serial Interface VEUSB422R3 */
|
|
#define FTDI_VARDAAN_PID 0xF070
|
|
|
|
/*
|
|
* Xsens Technologies BV products (http://www.xsens.com).
|
|
*/
|
|
#define XSENS_CONVERTER_0_PID 0xD388
|
|
#define XSENS_CONVERTER_1_PID 0xD389
|
|
#define XSENS_CONVERTER_2_PID 0xD38A
|
|
#define XSENS_CONVERTER_3_PID 0xD38B
|
|
#define XSENS_CONVERTER_4_PID 0xD38C
|
|
#define XSENS_CONVERTER_5_PID 0xD38D
|
|
#define XSENS_CONVERTER_6_PID 0xD38E
|
|
#define XSENS_CONVERTER_7_PID 0xD38F
|
|
|
|
/*
|
|
* NDI (www.ndigital.com) product ids
|
|
*/
|
|
#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
|
|
#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
|
|
#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
|
|
#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
|
|
#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
|
|
|
|
/*
|
|
* ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
|
|
*/
|
|
#define FTDI_CHAMSYS_24_MASTER_WING_PID 0xDAF8
|
|
#define FTDI_CHAMSYS_PC_WING_PID 0xDAF9
|
|
#define FTDI_CHAMSYS_USB_DMX_PID 0xDAFA
|
|
#define FTDI_CHAMSYS_MIDI_TIMECODE_PID 0xDAFB
|
|
#define FTDI_CHAMSYS_MINI_WING_PID 0xDAFC
|
|
#define FTDI_CHAMSYS_MAXI_WING_PID 0xDAFD
|
|
#define FTDI_CHAMSYS_MEDIA_WING_PID 0xDAFE
|
|
#define FTDI_CHAMSYS_WING_PID 0xDAFF
|
|
|
|
/*
|
|
* Westrex International devices submitted by Cory Lee
|
|
*/
|
|
#define FTDI_WESTREX_MODEL_777_PID 0xDC00 /* Model 777 */
|
|
#define FTDI_WESTREX_MODEL_8900F_PID 0xDC01 /* Model 8900F */
|
|
|
|
/*
|
|
* ACG Identification Technologies GmbH products (http://www.acg.de/).
|
|
* Submitted by anton -at- goto10 -dot- org.
|
|
*/
|
|
#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
|
|
|
|
/*
|
|
* Definitions for Artemis astronomical USB based cameras
|
|
* Check it at http://www.artemisccd.co.uk/
|
|
*/
|
|
#define FTDI_ARTEMIS_PID 0xDF28 /* All Artemis Cameras */
|
|
|
|
/*
|
|
* Definitions for ATIK Instruments astronomical USB based cameras
|
|
* Check it at http://www.atik-instruments.com/
|
|
*/
|
|
#define FTDI_ATIK_ATK16_PID 0xDF30 /* ATIK ATK-16 Grayscale Camera */
|
|
#define FTDI_ATIK_ATK16C_PID 0xDF32 /* ATIK ATK-16C Colour Camera */
|
|
#define FTDI_ATIK_ATK16HR_PID 0xDF31 /* ATIK ATK-16HR Grayscale Camera */
|
|
#define FTDI_ATIK_ATK16HRC_PID 0xDF33 /* ATIK ATK-16HRC Colour Camera */
|
|
#define FTDI_ATIK_ATK16IC_PID 0xDF35 /* ATIK ATK-16IC Grayscale Camera */
|
|
|
|
/*
|
|
* Yost Engineering, Inc. products (www.yostengineering.com).
|
|
* PID 0xE050 submitted by Aaron Prose.
|
|
*/
|
|
#define FTDI_YEI_SERVOCENTER31_PID 0xE050 /* YEI ServoCenter3.1 USB */
|
|
|
|
/*
|
|
* ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
|
|
* All of these devices use FTDI's vendor ID (0x0403).
|
|
* Further IDs taken from ELV Windows .inf file.
|
|
*
|
|
* The previously included PID for the UO 100 module was incorrect.
|
|
* In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
|
|
*
|
|
* Armin Laeuger originally sent the PID for the UM 100 module.
|
|
*/
|
|
#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */
|
|
#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */
|
|
#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */
|
|
#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */
|
|
#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */
|
|
#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */
|
|
#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */
|
|
#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */
|
|
#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
|
|
#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
|
|
#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
|
|
#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */
|
|
#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
|
|
#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */
|
|
#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */
|
|
#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Energy monitor EM 1010 PC */
|
|
#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
|
|
#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
|
|
#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
|
|
#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
|
|
#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
|
|
#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */
|
|
#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
|
|
#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */
|
|
#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
|
|
#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
|
|
#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
|
|
#define FTDI_ELV_USI2_PID 0xF06A /* USB-Schrittmotoren-Interface (USI 2) */
|
|
#define FTDI_ELV_T1100_PID 0xF06B /* Thermometer (T 1100) */
|
|
#define FTDI_ELV_PCD200_PID 0xF06C /* PC-Datenlogger (PCD 200) */
|
|
#define FTDI_ELV_ULA200_PID 0xF06D /* USB-LCD-Ansteuerung (ULA 200) */
|
|
#define FTDI_ELV_ALC8500_PID 0xF06E /* ALC 8500 Expert */
|
|
#define FTDI_ELV_FHZ1000PC_PID 0xF06F /* FHZ 1000 PC */
|
|
#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
|
|
#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
|
|
#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
|
|
/* Additional ELV PIDs that default to using the FTDI D2XX drivers on
|
|
* MS Windows, rather than the FTDI Virtual Com Port drivers.
|
|
* Maybe these will be easier to use with the libftdi/libusb user-space
|
|
* drivers, or possibly the Comedi drivers in some cases. */
|
|
#define FTDI_ELV_CLI7000_PID 0xFB59 /* Computer-Light-Interface (CLI 7000) */
|
|
#define FTDI_ELV_PPS7330_PID 0xFB5C /* Processor-Power-Supply (PPS 7330) */
|
|
#define FTDI_ELV_TFM100_PID 0xFB5D /* Temperatur-Feuchte-Messgeraet (TFM 100) */
|
|
#define FTDI_ELV_UDF77_PID 0xFB5E /* USB DCF Funkuhr (UDF 77) */
|
|
#define FTDI_ELV_UIO88_PID 0xFB5F /* USB-I/O Interface (UIO 88) */
|
|
|
|
/*
|
|
* EVER Eco Pro UPS (http://www.ever.com.pl/)
|
|
*/
|
|
|
|
#define EVER_ECO_PRO_CDS 0xe520 /* RS-232 converter */
|
|
|
|
/*
|
|
* Active Robots product ids.
|
|
*/
|
|
#define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */
|
|
|
|
/* Pyramid Computer GmbH */
|
|
#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
|
|
|
|
/* www.elsterelectricity.com Elster Unicom III Optical Probe */
|
|
#define FTDI_ELSTER_UNICOM_PID 0xE700 /* Product Id */
|
|
|
|
/*
|
|
* Gude Analog- und Digitalsysteme GmbH
|
|
*/
|
|
#define FTDI_GUDEADS_E808_PID 0xE808
|
|
#define FTDI_GUDEADS_E809_PID 0xE809
|
|
#define FTDI_GUDEADS_E80A_PID 0xE80A
|
|
#define FTDI_GUDEADS_E80B_PID 0xE80B
|
|
#define FTDI_GUDEADS_E80C_PID 0xE80C
|
|
#define FTDI_GUDEADS_E80D_PID 0xE80D
|
|
#define FTDI_GUDEADS_E80E_PID 0xE80E
|
|
#define FTDI_GUDEADS_E80F_PID 0xE80F
|
|
#define FTDI_GUDEADS_E888_PID 0xE888 /* Expert ISDN Control USB */
|
|
#define FTDI_GUDEADS_E889_PID 0xE889 /* USB RS-232 OptoBridge */
|
|
#define FTDI_GUDEADS_E88A_PID 0xE88A
|
|
#define FTDI_GUDEADS_E88B_PID 0xE88B
|
|
#define FTDI_GUDEADS_E88C_PID 0xE88C
|
|
#define FTDI_GUDEADS_E88D_PID 0xE88D
|
|
#define FTDI_GUDEADS_E88E_PID 0xE88E
|
|
#define FTDI_GUDEADS_E88F_PID 0xE88F
|
|
|
|
/*
|
|
* Eclo (http://www.eclo.pt/) product IDs.
|
|
* PID 0xEA90 submitted by Martin Grill.
|
|
*/
|
|
#define FTDI_ECLO_COM_1WIRE_PID 0xEA90 /* COM to 1-Wire USB adaptor */
|
|
|
|
/* TNC-X USB-to-packet-radio adapter, versions prior to 3.0 (DLP module) */
|
|
#define FTDI_TNC_X_PID 0xEBE0
|
|
|
|
/*
|
|
* Teratronik product ids.
|
|
* Submitted by O. Wölfelschneider.
|
|
*/
|
|
#define FTDI_TERATRONIK_VCP_PID 0xEC88 /* Teratronik device (preferring VCP driver on windows) */
|
|
#define FTDI_TERATRONIK_D2XX_PID 0xEC89 /* Teratronik device (preferring D2XX driver on windows) */
|
|
|
|
/* Rig Expert Ukraine devices */
|
|
#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */
|
|
|
|
/*
|
|
* Hameg HO820 and HO870 interface (using VID 0x0403)
|
|
*/
|
|
#define HAMEG_HO820_PID 0xed74
|
|
#define HAMEG_HO730_PID 0xed73
|
|
#define HAMEG_HO720_PID 0xed72
|
|
#define HAMEG_HO870_PID 0xed71
|
|
|
|
/*
|
|
* MaxStream devices www.maxstream.net
|
|
*/
|
|
#define FTDI_MAXSTREAM_PID 0xEE18 /* Xbee PKG-U Module */
|
|
|
|
/*
|
|
* microHAM product IDs (http://www.microham.com).
|
|
* Submitted by Justin Burket (KL1RL) <zorton@jtan.com>
|
|
* and Mike Studer (K6EEP) <k6eep@hamsoftware.org>.
|
|
* Ian Abbott <abbotti@mev.co.uk> added a few more from the driver INF file.
|
|
*/
|
|
#define FTDI_MHAM_KW_PID 0xEEE8 /* USB-KW interface */
|
|
#define FTDI_MHAM_YS_PID 0xEEE9 /* USB-YS interface */
|
|
#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */
|
|
#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */
|
|
#define FTDI_MHAM_IC_PID 0xEEEC /* USB-IC interface */
|
|
#define FTDI_MHAM_DB9_PID 0xEEED /* USB-DB9 interface */
|
|
#define FTDI_MHAM_RS232_PID 0xEEEE /* USB-RS232 interface */
|
|
#define FTDI_MHAM_Y9_PID 0xEEEF /* USB-Y9 interface */
|
|
|
|
/* Domintell products http://www.domintell.com */
|
|
#define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */
|
|
#define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */
|
|
|
|
/*
|
|
* The following are the values for the Perle Systems
|
|
* UltraPort USB serial converters
|
|
*/
|
|
#define FTDI_PERLE_ULTRAPORT_PID 0xF0C0 /* Perle UltraPort Product Id */
|
|
|
|
/* Sprog II (Andrew Crosland's SprogII DCC interface) */
|
|
#define FTDI_SPROG_II 0xF0C8
|
|
|
|
/* an infrared receiver for user access control with IR tags */
|
|
#define FTDI_PIEGROUP_PID 0xF208 /* Product Id */
|
|
|
|
/* ACT Solutions HomePro ZWave interface
|
|
(http://www.act-solutions.com/HomePro-Product-Matrix.html) */
|
|
#define FTDI_ACTZWAVE_PID 0xF2D0
|
|
|
|
/*
|
|
* 4N-GALAXY.DE PIDs for CAN-USB, USB-RS232, USB-RS422, USB-RS485,
|
|
* USB-TTY aktiv, USB-TTY passiv. Some PIDs are used by several devices
|
|
* and I'm not entirely sure which are used by which.
|
|
*/
|
|
#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
|
|
#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
|
|
|
|
/*
|
|
* Linx Technologies product ids
|
|
*/
|
|
#define LINX_SDMUSBQSS_PID 0xF448 /* Linx SDM-USB-QS-S */
|
|
#define LINX_MASTERDEVEL2_PID 0xF449 /* Linx Master Development 2.0 */
|
|
#define LINX_FUTURE_0_PID 0xF44A /* Linx future device */
|
|
#define LINX_FUTURE_1_PID 0xF44B /* Linx future device */
|
|
#define LINX_FUTURE_2_PID 0xF44C /* Linx future device */
|
|
|
|
/*
|
|
* Oceanic product ids
|
|
*/
|
|
#define FTDI_OCEANIC_PID 0xF460 /* Oceanic dive instrument */
|
|
|
|
/*
|
|
* SUUNTO product ids
|
|
*/
|
|
#define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */
|
|
|
|
/* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */
|
|
/* http://www.usbuirt.com/ */
|
|
#define FTDI_USB_UIRT_PID 0xF850 /* Product Id */
|
|
|
|
/* CCS Inc. ICDU/ICDU40 product ID -
|
|
* the FT232BM is used in an in-circuit-debugger unit for PIC16's/PIC18's */
|
|
#define FTDI_CCSICDU20_0_PID 0xF9D0
|
|
#define FTDI_CCSICDU40_1_PID 0xF9D1
|
|
#define FTDI_CCSMACHX_2_PID 0xF9D2
|
|
#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
|
|
#define FTDI_CCSICDU64_4_PID 0xF9D4
|
|
#define FTDI_CCSPRIME8_5_PID 0xF9D5
|
|
|
|
/*
|
|
* The following are the values for the Matrix Orbital LCD displays,
|
|
* which are the FT232BM ( similar to the 8U232AM )
|
|
*/
|
|
#define FTDI_MTXORB_0_PID 0xFA00 /* Matrix Orbital Product Id */
|
|
#define FTDI_MTXORB_1_PID 0xFA01 /* Matrix Orbital Product Id */
|
|
#define FTDI_MTXORB_2_PID 0xFA02 /* Matrix Orbital Product Id */
|
|
#define FTDI_MTXORB_3_PID 0xFA03 /* Matrix Orbital Product Id */
|
|
#define FTDI_MTXORB_4_PID 0xFA04 /* Matrix Orbital Product Id */
|
|
#define FTDI_MTXORB_5_PID 0xFA05 /* Matrix Orbital Product Id */
|
|
#define FTDI_MTXORB_6_PID 0xFA06 /* Matrix Orbital Product Id */
|
|
|
|
/*
|
|
* Home Electronics (www.home-electro.com) USB gadgets
|
|
*/
|
|
#define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */
|
|
|
|
/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */
|
|
#define INSIDE_ACCESSO 0xFAD0
|
|
|
|
/*
|
|
* ThorLabs USB motor drivers
|
|
*/
|
|
#define FTDI_THORLABS_PID 0xfaf0 /* ThorLabs USB motor drivers */
|
|
|
|
/*
|
|
* Protego product ids
|
|
*/
|
|
#define PROTEGO_SPECIAL_1 0xFC70 /* special/unknown device */
|
|
#define PROTEGO_R2X0 0xFC71 /* R200-USB TRNG unit (R210, R220, and R230) */
|
|
#define PROTEGO_SPECIAL_3 0xFC72 /* special/unknown device */
|
|
#define PROTEGO_SPECIAL_4 0xFC73 /* special/unknown device */
|
|
|
|
/*
|
|
* DSS-20 Sync Station for Sony Ericsson P800
|
|
*/
|
|
#define FTDI_DSS20_PID 0xFC82
|
|
|
|
/* www.irtrans.de device */
|
|
#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
|
|
|
|
/*
|
|
* RM Michaelides CANview USB (http://www.rmcan.com) (FTDI_VID)
|
|
* CAN fieldbus interface adapter, added by port GmbH www.port.de)
|
|
* Ian Abbott changed the macro names for consistency.
|
|
*/
|
|
#define FTDI_RM_CANVIEW_PID 0xfd60 /* Product Id */
|
|
/* www.thoughttechnology.com/ TT-USB provide with procomp use ftdi_sio */
|
|
#define FTDI_TTUSB_PID 0xFF20 /* Product Id */
|
|
|
|
#define FTDI_USBX_707_PID 0xF857 /* ADSTech IR Blaster USBX-707 (FTDI_VID) */
|
|
|
|
#define FTDI_RELAIS_PID 0xFA10 /* Relais device from Rudolf Gugler */
|
|
|
|
/*
|
|
* PCDJ use ftdi based dj-controllers. The following PID is
|
|
* for their DAC-2 device http://www.pcdjhardware.com/DAC2.asp
|
|
* (the VID is the standard ftdi vid (FTDI_VID), PID sent by Wouter Paesen)
|
|
*/
|
|
#define FTDI_PCDJ_DAC2_PID 0xFA88
|
|
|
|
#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG (FTDI_VID) */
|
|
|
|
/*
|
|
* DIEBOLD BCS SE923 (FTDI_VID)
|
|
*/
|
|
#define DIEBOLD_BCS_SE923_PID 0xfb99
|
|
|
|
/* www.crystalfontz.com devices
|
|
* - thanx for providing free devices for evaluation !
|
|
* they use the ftdi chipset for the USB interface
|
|
* and the vendor id is the same
|
|
*/
|
|
#define FTDI_XF_632_PID 0xFC08 /* 632: 16x2 Character Display */
|
|
#define FTDI_XF_634_PID 0xFC09 /* 634: 20x4 Character Display */
|
|
#define FTDI_XF_547_PID 0xFC0A /* 547: Two line Display */
|
|
#define FTDI_XF_633_PID 0xFC0B /* 633: 16x2 Character Display with Keys */
|
|
#define FTDI_XF_631_PID 0xFC0C /* 631: 20x2 Character Display */
|
|
#define FTDI_XF_635_PID 0xFC0D /* 635: 20x4 Character Display */
|
|
#define FTDI_XF_640_PID 0xFC0E /* 640: Two line Display */
|
|
#define FTDI_XF_642_PID 0xFC0F /* 642: Two line Display */
|
|
|
|
/*
|
|
* Video Networks Limited / Homechoice in the UK use an ftdi-based device
|
|
* for their 1Mb broadband internet service. The following PID is exhibited
|
|
* by the usb device supplied (the VID is the standard ftdi vid (FTDI_VID)
|
|
*/
|
|
#define FTDI_VNHCPCUSB_D_PID 0xfe38 /* Product Id */
|
|
|
|
/* AlphaMicro Components AMC-232USB01 device (FTDI_VID) */
|
|
#define FTDI_AMC232_PID 0xFF00 /* Product Id */
|
|
|
|
/*
|
|
* IBS elektronik product ids (FTDI_VID)
|
|
* Submitted by Thomas Schleusener
|
|
*/
|
|
#define FTDI_IBS_US485_PID 0xff38 /* IBS US485 (USB<-->RS422/485 interface) */
|
|
#define FTDI_IBS_PICPRO_PID 0xff39 /* IBS PIC-Programmer */
|
|
#define FTDI_IBS_PCMCIA_PID 0xff3a /* IBS Card reader for PCMCIA SRAM-cards */
|
|
#define FTDI_IBS_PK1_PID 0xff3b /* IBS PK1 - Particel counter */
|
|
#define FTDI_IBS_RS232MON_PID 0xff3c /* IBS RS232 - Monitor */
|
|
#define FTDI_IBS_APP70_PID 0xff3d /* APP 70 (dust monitoring system) */
|
|
#define FTDI_IBS_PEDO_PID 0xff3e /* IBS PEDO-Modem (RF modem 868.35 MHz) */
|
|
#define FTDI_IBS_PROD_PID 0xff3f /* future device */
|
|
/* www.canusb.com Lawicel CANUSB device (FTDI_VID) */
|
|
#define FTDI_CANUSB_PID 0xFFA8 /* Product Id */
|
|
|
|
|
|
|
|
/********************************/
|
|
/** third-party VID/PID combos **/
|
|
/********************************/
|
|
|
|
|
|
|
|
/*
|
|
* Atmel STK541
|
|
*/
|
|
#define ATMEL_VID 0x03eb /* Vendor ID */
|
|
#define STK541_PID 0x2109 /* Zigbee Controller */
|
|
|
|
/*
|
|
* Blackfin gnICE JTAG
|
|
* http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice
|
|
*/
|
|
#define ADI_VID 0x0456
|
|
#define ADI_GNICE_PID 0xF000
|
|
#define ADI_GNICEPLUS_PID 0xF001
|
|
|
|
/*
|
|
* RATOC REX-USB60F
|
|
*/
|
|
#define RATOC_VENDOR_ID 0x0584
|
|
#define RATOC_PRODUCT_ID_USB60F 0xb020
|
|
|
|
/*
|
|
* Acton Research Corp.
|
|
*/
|
|
#define ACTON_VID 0x0647 /* Vendor ID */
|
|
#define ACTON_SPECTRAPRO_PID 0x0100
|
|
|
|
/*
|
|
* Contec products (http://www.contec.com)
|
|
* Submitted by Daniel Sangorrin
|
|
*/
|
|
#define CONTEC_VID 0x06CE /* Vendor ID */
|
|
#define CONTEC_COM1USBH_PID 0x8311 /* COM-1(USB)H */
|
|
|
|
/*
|
|
* Definitions for B&B Electronics products.
|
|
*/
|
|
#define BANDB_VID 0x0856 /* B&B Electronics Vendor ID */
|
|
#define BANDB_USOTL4_PID 0xAC01 /* USOTL4 Isolated RS-485 Converter */
|
|
#define BANDB_USTL4_PID 0xAC02 /* USTL4 RS-485 Converter */
|
|
#define BANDB_USO9ML2_PID 0xAC03 /* USO9ML2 Isolated RS-232 Converter */
|
|
#define BANDB_USOPTL4_PID 0xAC11
|
|
#define BANDB_USPTL4_PID 0xAC12
|
|
#define BANDB_USO9ML2DR_2_PID 0xAC16
|
|
#define BANDB_USO9ML2DR_PID 0xAC17
|
|
#define BANDB_USOPTL4DR2_PID 0xAC18 /* USOPTL4R-2 2-port Isolated RS-232 Converter */
|
|
#define BANDB_USOPTL4DR_PID 0xAC19
|
|
#define BANDB_485USB9F_2W_PID 0xAC25
|
|
#define BANDB_485USB9F_4W_PID 0xAC26
|
|
#define BANDB_232USB9M_PID 0xAC27
|
|
#define BANDB_485USBTB_2W_PID 0xAC33
|
|
#define BANDB_485USBTB_4W_PID 0xAC34
|
|
#define BANDB_TTL5USB9M_PID 0xAC49
|
|
#define BANDB_TTL3USB9M_PID 0xAC50
|
|
#define BANDB_ZZ_PROG1_USB_PID 0xBA02
|
|
|
|
/*
|
|
* Intrepid Control Systems (http://www.intrepidcs.com/) ValueCAN and NeoVI
|
|
*/
|
|
#define INTREPID_VID 0x093C
|
|
#define INTREPID_VALUECAN_PID 0x0601
|
|
#define INTREPID_NEOVI_PID 0x0701
|
|
|
|
/*
|
|
* Definitions for ID TECH (www.idt-net.com) devices
|
|
*/
|
|
#define IDTECH_VID 0x0ACD /* ID TECH Vendor ID */
|
|
#define IDTECH_IDT1221U_PID 0x0300 /* IDT1221U USB to RS-232 adapter */
|
|
|
|
/*
|
|
* Definitions for Omnidirectional Control Technology, Inc. devices
|
|
*/
|
|
#define OCT_VID 0x0B39 /* OCT vendor ID */
|
|
/* Note: OCT US101 is also rebadged as Dick Smith Electronics (NZ) XH6381 */
|
|
/* Also rebadged as Dick Smith Electronics (Aus) XH6451 */
|
|
/* Also rebadged as SIIG Inc. model US2308 hardware version 1 */
|
|
#define OCT_DK201_PID 0x0103 /* OCT DK201 USB docking station */
|
|
#define OCT_US101_PID 0x0421 /* OCT US101 USB to RS-232 */
|
|
|
|
/*
|
|
* Definitions for Icom Inc. devices
|
|
*/
|
|
#define ICOM_VID 0x0C26 /* Icom vendor ID */
|
|
/* Note: ID-1 is a communications tranceiver for HAM-radio operators */
|
|
#define ICOM_ID_1_PID 0x0004 /* ID-1 USB to RS-232 */
|
|
/* Note: OPC is an Optional cable to connect an Icom Tranceiver */
|
|
#define ICOM_OPC_U_UC_PID 0x0018 /* OPC-478UC, OPC-1122U cloning cable */
|
|
/* Note: ID-RP* devices are Icom Repeater Devices for HAM-radio */
|
|
#define ICOM_ID_RP2C1_PID 0x0009 /* ID-RP2C Asset 1 to RS-232 */
|
|
#define ICOM_ID_RP2C2_PID 0x000A /* ID-RP2C Asset 2 to RS-232 */
|
|
#define ICOM_ID_RP2D_PID 0x000B /* ID-RP2D configuration port*/
|
|
#define ICOM_ID_RP2VT_PID 0x000C /* ID-RP2V Transmit config port */
|
|
#define ICOM_ID_RP2VR_PID 0x000D /* ID-RP2V Receive config port */
|
|
#define ICOM_ID_RP4KVT_PID 0x0010 /* ID-RP4000V Transmit config port */
|
|
#define ICOM_ID_RP4KVR_PID 0x0011 /* ID-RP4000V Receive config port */
|
|
#define ICOM_ID_RP2KVT_PID 0x0012 /* ID-RP2000V Transmit config port */
|
|
#define ICOM_ID_RP2KVR_PID 0x0013 /* ID-RP2000V Receive config port */
|
|
|
|
/*
|
|
* GN Otometrics (http://www.otometrics.com)
|
|
* Submitted by Ville Sundberg.
|
|
*/
|
|
#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
|
|
#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
|
|
|
|
/*
|
|
* The following are the values for the Sealevel SeaLINK+ adapters.
|
|
* (Original list sent by Tuan Hoang. Ian Abbott renamed the macros and
|
|
* removed some PIDs that don't seem to match any existing products.)
|
|
*/
|
|
#define SEALEVEL_VID 0x0c52 /* Sealevel Vendor ID */
|
|
#define SEALEVEL_2101_PID 0x2101 /* SeaLINK+232 (2101/2105) */
|
|
#define SEALEVEL_2102_PID 0x2102 /* SeaLINK+485 (2102) */
|
|
#define SEALEVEL_2103_PID 0x2103 /* SeaLINK+232I (2103) */
|
|
#define SEALEVEL_2104_PID 0x2104 /* SeaLINK+485I (2104) */
|
|
#define SEALEVEL_2106_PID 0x9020 /* SeaLINK+422 (2106) */
|
|
#define SEALEVEL_2201_1_PID 0x2211 /* SeaPORT+2/232 (2201) Port 1 */
|
|
#define SEALEVEL_2201_2_PID 0x2221 /* SeaPORT+2/232 (2201) Port 2 */
|
|
#define SEALEVEL_2202_1_PID 0x2212 /* SeaPORT+2/485 (2202) Port 1 */
|
|
#define SEALEVEL_2202_2_PID 0x2222 /* SeaPORT+2/485 (2202) Port 2 */
|
|
#define SEALEVEL_2203_1_PID 0x2213 /* SeaPORT+2 (2203) Port 1 */
|
|
#define SEALEVEL_2203_2_PID 0x2223 /* SeaPORT+2 (2203) Port 2 */
|
|
#define SEALEVEL_2401_1_PID 0x2411 /* SeaPORT+4/232 (2401) Port 1 */
|
|
#define SEALEVEL_2401_2_PID 0x2421 /* SeaPORT+4/232 (2401) Port 2 */
|
|
#define SEALEVEL_2401_3_PID 0x2431 /* SeaPORT+4/232 (2401) Port 3 */
|
|
#define SEALEVEL_2401_4_PID 0x2441 /* SeaPORT+4/232 (2401) Port 4 */
|
|
#define SEALEVEL_2402_1_PID 0x2412 /* SeaPORT+4/485 (2402) Port 1 */
|
|
#define SEALEVEL_2402_2_PID 0x2422 /* SeaPORT+4/485 (2402) Port 2 */
|
|
#define SEALEVEL_2402_3_PID 0x2432 /* SeaPORT+4/485 (2402) Port 3 */
|
|
#define SEALEVEL_2402_4_PID 0x2442 /* SeaPORT+4/485 (2402) Port 4 */
|
|
#define SEALEVEL_2403_1_PID 0x2413 /* SeaPORT+4 (2403) Port 1 */
|
|
#define SEALEVEL_2403_2_PID 0x2423 /* SeaPORT+4 (2403) Port 2 */
|
|
#define SEALEVEL_2403_3_PID 0x2433 /* SeaPORT+4 (2403) Port 3 */
|
|
#define SEALEVEL_2403_4_PID 0x2443 /* SeaPORT+4 (2403) Port 4 */
|
|
#define SEALEVEL_2801_1_PID 0X2811 /* SeaLINK+8/232 (2801) Port 1 */
|
|
#define SEALEVEL_2801_2_PID 0X2821 /* SeaLINK+8/232 (2801) Port 2 */
|
|
#define SEALEVEL_2801_3_PID 0X2831 /* SeaLINK+8/232 (2801) Port 3 */
|
|
#define SEALEVEL_2801_4_PID 0X2841 /* SeaLINK+8/232 (2801) Port 4 */
|
|
#define SEALEVEL_2801_5_PID 0X2851 /* SeaLINK+8/232 (2801) Port 5 */
|
|
#define SEALEVEL_2801_6_PID 0X2861 /* SeaLINK+8/232 (2801) Port 6 */
|
|
#define SEALEVEL_2801_7_PID 0X2871 /* SeaLINK+8/232 (2801) Port 7 */
|
|
#define SEALEVEL_2801_8_PID 0X2881 /* SeaLINK+8/232 (2801) Port 8 */
|
|
#define SEALEVEL_2802_1_PID 0X2812 /* SeaLINK+8/485 (2802) Port 1 */
|
|
#define SEALEVEL_2802_2_PID 0X2822 /* SeaLINK+8/485 (2802) Port 2 */
|
|
#define SEALEVEL_2802_3_PID 0X2832 /* SeaLINK+8/485 (2802) Port 3 */
|
|
#define SEALEVEL_2802_4_PID 0X2842 /* SeaLINK+8/485 (2802) Port 4 */
|
|
#define SEALEVEL_2802_5_PID 0X2852 /* SeaLINK+8/485 (2802) Port 5 */
|
|
#define SEALEVEL_2802_6_PID 0X2862 /* SeaLINK+8/485 (2802) Port 6 */
|
|
#define SEALEVEL_2802_7_PID 0X2872 /* SeaLINK+8/485 (2802) Port 7 */
|
|
#define SEALEVEL_2802_8_PID 0X2882 /* SeaLINK+8/485 (2802) Port 8 */
|
|
#define SEALEVEL_2803_1_PID 0X2813 /* SeaLINK+8 (2803) Port 1 */
|
|
#define SEALEVEL_2803_2_PID 0X2823 /* SeaLINK+8 (2803) Port 2 */
|
|
#define SEALEVEL_2803_3_PID 0X2833 /* SeaLINK+8 (2803) Port 3 */
|
|
#define SEALEVEL_2803_4_PID 0X2843 /* SeaLINK+8 (2803) Port 4 */
|
|
#define SEALEVEL_2803_5_PID 0X2853 /* SeaLINK+8 (2803) Port 5 */
|
|
#define SEALEVEL_2803_6_PID 0X2863 /* SeaLINK+8 (2803) Port 6 */
|
|
#define SEALEVEL_2803_7_PID 0X2873 /* SeaLINK+8 (2803) Port 7 */
|
|
#define SEALEVEL_2803_8_PID 0X2883 /* SeaLINK+8 (2803) Port 8 */
|
|
|
|
/*
|
|
* JETI SPECTROMETER SPECBOS 1201
|
|
* http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101
|
|
*/
|
|
#define JETI_VID 0x0c6c
|
|
#define JETI_SPC1201_PID 0x04b2
|
|
|
|
/*
|
|
* FTDI USB UART chips used in construction projects from the
|
|
* Elektor Electronics magazine (http://www.elektor.com/)
|
|
*/
|
|
#define ELEKTOR_VID 0x0C7D
|
|
#define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */
|
|
|
|
/*
|
|
* Posiflex inc retail equipment (http://www.posiflex.com.tw)
|
|
*/
|
|
#define POSIFLEX_VID 0x0d3a /* Vendor ID */
|
|
#define POSIFLEX_PP7000_PID 0x0300 /* PP-7000II thermal printer */
|
|
|
|
/*
|
|
* The following are the values for two KOBIL chipcard terminals.
|
|
*/
|
|
#define KOBIL_VID 0x0d46 /* KOBIL Vendor ID */
|
|
#define KOBIL_CONV_B1_PID 0x2020 /* KOBIL Konverter for B1 */
|
|
#define KOBIL_CONV_KAAN_PID 0x2021 /* KOBIL_Konverter for KAAN */
|
|
|
|
#define FTDI_NF_RIC_VID 0x0DCD /* Vendor Id */
|
|
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
|
|
|
|
/*
|
|
* Falcom Wireless Communications GmbH
|
|
*/
|
|
#define FALCOM_VID 0x0F94 /* Vendor Id */
|
|
#define FALCOM_TWIST_PID 0x0001 /* Falcom Twist USB GPRS modem */
|
|
#define FALCOM_SAMBA_PID 0x0005 /* Falcom Samba USB GPRS modem */
|
|
|
|
/* Larsen and Brusgaard AltiTrack/USBtrack */
|
|
#define LARSENBRUSGAARD_VID 0x0FD8
|
|
#define LB_ALTITRACK_PID 0x0001
|
|
|
|
/*
|
|
* TTi (Thurlby Thandar Instruments)
|
|
*/
|
|
#define TTI_VID 0x103E /* Vendor Id */
|
|
#define TTI_QL355P_PID 0x03E8 /* TTi QL355P power supply */
|
|
|
|
/* Interbiometrics USB I/O Board */
|
|
/* Developed for Interbiometrics by Rudolf Gugler */
|
|
#define INTERBIOMETRICS_VID 0x1209
|
|
#define INTERBIOMETRICS_IOBOARD_PID 0x1002
|
|
#define INTERBIOMETRICS_MINI_IOBOARD_PID 0x1006
|
|
|
|
/*
|
|
* Testo products (http://www.testo.com/)
|
|
* Submitted by Colin Leroy
|
|
*/
|
|
#define TESTO_VID 0x128D
|
|
#define TESTO_USB_INTERFACE_PID 0x0001
|
|
|
|
/*
|
|
* Mobility Electronics products.
|
|
*/
|
|
#define MOBILITY_VID 0x1342
|
|
#define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */
|
|
|
|
/*
|
|
* FIC / OpenMoko, Inc. http://wiki.openmoko.org/wiki/Neo1973_Debug_Board_v3
|
|
* Submitted by Harald Welte <laforge@openmoko.org>
|
|
*/
|
|
#define FIC_VID 0x1457
|
|
#define FIC_NEO1973_DEBUG_PID 0x5118
|
|
|
|
/* Olimex */
|
|
#define OLIMEX_VID 0x15BA
|
|
#define OLIMEX_ARM_USB_OCD_PID 0x0003
|
|
#define OLIMEX_ARM_USB_OCD_H_PID 0x002b
|
|
|
|
/*
|
|
* Telldus Technologies
|
|
*/
|
|
#define TELLDUS_VID 0x1781 /* Vendor ID */
|
|
#define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */
|
|
|
|
/*
|
|
* RT Systems programming cables for various ham radios
|
|
*/
|
|
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
|
|
#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
|
|
#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
|
|
|
|
/*
|
|
* Bayer Ascensia Contour blood glucose meter USB-converter cable.
|
|
* http://winglucofacts.com/cables/
|
|
*/
|
|
#define BAYER_VID 0x1A79
|
|
#define BAYER_CONTOUR_CABLE_PID 0x6001
|
|
|
|
/*
|
|
* The following are the values for the Matrix Orbital FTDI Range
|
|
* Anything in this range will use an FT232RL.
|
|
*/
|
|
#define MTXORB_VID 0x1B3D
|
|
#define MTXORB_FTDI_RANGE_0100_PID 0x0100
|
|
#define MTXORB_FTDI_RANGE_0101_PID 0x0101
|
|
#define MTXORB_FTDI_RANGE_0102_PID 0x0102
|
|
#define MTXORB_FTDI_RANGE_0103_PID 0x0103
|
|
#define MTXORB_FTDI_RANGE_0104_PID 0x0104
|
|
#define MTXORB_FTDI_RANGE_0105_PID 0x0105
|
|
#define MTXORB_FTDI_RANGE_0106_PID 0x0106
|
|
#define MTXORB_FTDI_RANGE_0107_PID 0x0107
|
|
#define MTXORB_FTDI_RANGE_0108_PID 0x0108
|
|
#define MTXORB_FTDI_RANGE_0109_PID 0x0109
|
|
#define MTXORB_FTDI_RANGE_010A_PID 0x010A
|
|
#define MTXORB_FTDI_RANGE_010B_PID 0x010B
|
|
#define MTXORB_FTDI_RANGE_010C_PID 0x010C
|
|
#define MTXORB_FTDI_RANGE_010D_PID 0x010D
|
|
#define MTXORB_FTDI_RANGE_010E_PID 0x010E
|
|
#define MTXORB_FTDI_RANGE_010F_PID 0x010F
|
|
#define MTXORB_FTDI_RANGE_0110_PID 0x0110
|
|
#define MTXORB_FTDI_RANGE_0111_PID 0x0111
|
|
#define MTXORB_FTDI_RANGE_0112_PID 0x0112
|
|
#define MTXORB_FTDI_RANGE_0113_PID 0x0113
|
|
#define MTXORB_FTDI_RANGE_0114_PID 0x0114
|
|
#define MTXORB_FTDI_RANGE_0115_PID 0x0115
|
|
#define MTXORB_FTDI_RANGE_0116_PID 0x0116
|
|
#define MTXORB_FTDI_RANGE_0117_PID 0x0117
|
|
#define MTXORB_FTDI_RANGE_0118_PID 0x0118
|
|
#define MTXORB_FTDI_RANGE_0119_PID 0x0119
|
|
#define MTXORB_FTDI_RANGE_011A_PID 0x011A
|
|
#define MTXORB_FTDI_RANGE_011B_PID 0x011B
|
|
#define MTXORB_FTDI_RANGE_011C_PID 0x011C
|
|
#define MTXORB_FTDI_RANGE_011D_PID 0x011D
|
|
#define MTXORB_FTDI_RANGE_011E_PID 0x011E
|
|
#define MTXORB_FTDI_RANGE_011F_PID 0x011F
|
|
#define MTXORB_FTDI_RANGE_0120_PID 0x0120
|
|
#define MTXORB_FTDI_RANGE_0121_PID 0x0121
|
|
#define MTXORB_FTDI_RANGE_0122_PID 0x0122
|
|
#define MTXORB_FTDI_RANGE_0123_PID 0x0123
|
|
#define MTXORB_FTDI_RANGE_0124_PID 0x0124
|
|
#define MTXORB_FTDI_RANGE_0125_PID 0x0125
|
|
#define MTXORB_FTDI_RANGE_0126_PID 0x0126
|
|
#define MTXORB_FTDI_RANGE_0127_PID 0x0127
|
|
#define MTXORB_FTDI_RANGE_0128_PID 0x0128
|
|
#define MTXORB_FTDI_RANGE_0129_PID 0x0129
|
|
#define MTXORB_FTDI_RANGE_012A_PID 0x012A
|
|
#define MTXORB_FTDI_RANGE_012B_PID 0x012B
|
|
#define MTXORB_FTDI_RANGE_012C_PID 0x012C
|
|
#define MTXORB_FTDI_RANGE_012D_PID 0x012D
|
|
#define MTXORB_FTDI_RANGE_012E_PID 0x012E
|
|
#define MTXORB_FTDI_RANGE_012F_PID 0x012F
|
|
#define MTXORB_FTDI_RANGE_0130_PID 0x0130
|
|
#define MTXORB_FTDI_RANGE_0131_PID 0x0131
|
|
#define MTXORB_FTDI_RANGE_0132_PID 0x0132
|
|
#define MTXORB_FTDI_RANGE_0133_PID 0x0133
|
|
#define MTXORB_FTDI_RANGE_0134_PID 0x0134
|
|
#define MTXORB_FTDI_RANGE_0135_PID 0x0135
|
|
#define MTXORB_FTDI_RANGE_0136_PID 0x0136
|
|
#define MTXORB_FTDI_RANGE_0137_PID 0x0137
|
|
#define MTXORB_FTDI_RANGE_0138_PID 0x0138
|
|
#define MTXORB_FTDI_RANGE_0139_PID 0x0139
|
|
#define MTXORB_FTDI_RANGE_013A_PID 0x013A
|
|
#define MTXORB_FTDI_RANGE_013B_PID 0x013B
|
|
#define MTXORB_FTDI_RANGE_013C_PID 0x013C
|
|
#define MTXORB_FTDI_RANGE_013D_PID 0x013D
|
|
#define MTXORB_FTDI_RANGE_013E_PID 0x013E
|
|
#define MTXORB_FTDI_RANGE_013F_PID 0x013F
|
|
#define MTXORB_FTDI_RANGE_0140_PID 0x0140
|
|
#define MTXORB_FTDI_RANGE_0141_PID 0x0141
|
|
#define MTXORB_FTDI_RANGE_0142_PID 0x0142
|
|
#define MTXORB_FTDI_RANGE_0143_PID 0x0143
|
|
#define MTXORB_FTDI_RANGE_0144_PID 0x0144
|
|
#define MTXORB_FTDI_RANGE_0145_PID 0x0145
|
|
#define MTXORB_FTDI_RANGE_0146_PID 0x0146
|
|
#define MTXORB_FTDI_RANGE_0147_PID 0x0147
|
|
#define MTXORB_FTDI_RANGE_0148_PID 0x0148
|
|
#define MTXORB_FTDI_RANGE_0149_PID 0x0149
|
|
#define MTXORB_FTDI_RANGE_014A_PID 0x014A
|
|
#define MTXORB_FTDI_RANGE_014B_PID 0x014B
|
|
#define MTXORB_FTDI_RANGE_014C_PID 0x014C
|
|
#define MTXORB_FTDI_RANGE_014D_PID 0x014D
|
|
#define MTXORB_FTDI_RANGE_014E_PID 0x014E
|
|
#define MTXORB_FTDI_RANGE_014F_PID 0x014F
|
|
#define MTXORB_FTDI_RANGE_0150_PID 0x0150
|
|
#define MTXORB_FTDI_RANGE_0151_PID 0x0151
|
|
#define MTXORB_FTDI_RANGE_0152_PID 0x0152
|
|
#define MTXORB_FTDI_RANGE_0153_PID 0x0153
|
|
#define MTXORB_FTDI_RANGE_0154_PID 0x0154
|
|
#define MTXORB_FTDI_RANGE_0155_PID 0x0155
|
|
#define MTXORB_FTDI_RANGE_0156_PID 0x0156
|
|
#define MTXORB_FTDI_RANGE_0157_PID 0x0157
|
|
#define MTXORB_FTDI_RANGE_0158_PID 0x0158
|
|
#define MTXORB_FTDI_RANGE_0159_PID 0x0159
|
|
#define MTXORB_FTDI_RANGE_015A_PID 0x015A
|
|
#define MTXORB_FTDI_RANGE_015B_PID 0x015B
|
|
#define MTXORB_FTDI_RANGE_015C_PID 0x015C
|
|
#define MTXORB_FTDI_RANGE_015D_PID 0x015D
|
|
#define MTXORB_FTDI_RANGE_015E_PID 0x015E
|
|
#define MTXORB_FTDI_RANGE_015F_PID 0x015F
|
|
#define MTXORB_FTDI_RANGE_0160_PID 0x0160
|
|
#define MTXORB_FTDI_RANGE_0161_PID 0x0161
|
|
#define MTXORB_FTDI_RANGE_0162_PID 0x0162
|
|
#define MTXORB_FTDI_RANGE_0163_PID 0x0163
|
|
#define MTXORB_FTDI_RANGE_0164_PID 0x0164
|
|
#define MTXORB_FTDI_RANGE_0165_PID 0x0165
|
|
#define MTXORB_FTDI_RANGE_0166_PID 0x0166
|
|
#define MTXORB_FTDI_RANGE_0167_PID 0x0167
|
|
#define MTXORB_FTDI_RANGE_0168_PID 0x0168
|
|
#define MTXORB_FTDI_RANGE_0169_PID 0x0169
|
|
#define MTXORB_FTDI_RANGE_016A_PID 0x016A
|
|
#define MTXORB_FTDI_RANGE_016B_PID 0x016B
|
|
#define MTXORB_FTDI_RANGE_016C_PID 0x016C
|
|
#define MTXORB_FTDI_RANGE_016D_PID 0x016D
|
|
#define MTXORB_FTDI_RANGE_016E_PID 0x016E
|
|
#define MTXORB_FTDI_RANGE_016F_PID 0x016F
|
|
#define MTXORB_FTDI_RANGE_0170_PID 0x0170
|
|
#define MTXORB_FTDI_RANGE_0171_PID 0x0171
|
|
#define MTXORB_FTDI_RANGE_0172_PID 0x0172
|
|
#define MTXORB_FTDI_RANGE_0173_PID 0x0173
|
|
#define MTXORB_FTDI_RANGE_0174_PID 0x0174
|
|
#define MTXORB_FTDI_RANGE_0175_PID 0x0175
|
|
#define MTXORB_FTDI_RANGE_0176_PID 0x0176
|
|
#define MTXORB_FTDI_RANGE_0177_PID 0x0177
|
|
#define MTXORB_FTDI_RANGE_0178_PID 0x0178
|
|
#define MTXORB_FTDI_RANGE_0179_PID 0x0179
|
|
#define MTXORB_FTDI_RANGE_017A_PID 0x017A
|
|
#define MTXORB_FTDI_RANGE_017B_PID 0x017B
|
|
#define MTXORB_FTDI_RANGE_017C_PID 0x017C
|
|
#define MTXORB_FTDI_RANGE_017D_PID 0x017D
|
|
#define MTXORB_FTDI_RANGE_017E_PID 0x017E
|
|
#define MTXORB_FTDI_RANGE_017F_PID 0x017F
|
|
#define MTXORB_FTDI_RANGE_0180_PID 0x0180
|
|
#define MTXORB_FTDI_RANGE_0181_PID 0x0181
|
|
#define MTXORB_FTDI_RANGE_0182_PID 0x0182
|
|
#define MTXORB_FTDI_RANGE_0183_PID 0x0183
|
|
#define MTXORB_FTDI_RANGE_0184_PID 0x0184
|
|
#define MTXORB_FTDI_RANGE_0185_PID 0x0185
|
|
#define MTXORB_FTDI_RANGE_0186_PID 0x0186
|
|
#define MTXORB_FTDI_RANGE_0187_PID 0x0187
|
|
#define MTXORB_FTDI_RANGE_0188_PID 0x0188
|
|
#define MTXORB_FTDI_RANGE_0189_PID 0x0189
|
|
#define MTXORB_FTDI_RANGE_018A_PID 0x018A
|
|
#define MTXORB_FTDI_RANGE_018B_PID 0x018B
|
|
#define MTXORB_FTDI_RANGE_018C_PID 0x018C
|
|
#define MTXORB_FTDI_RANGE_018D_PID 0x018D
|
|
#define MTXORB_FTDI_RANGE_018E_PID 0x018E
|
|
#define MTXORB_FTDI_RANGE_018F_PID 0x018F
|
|
#define MTXORB_FTDI_RANGE_0190_PID 0x0190
|
|
#define MTXORB_FTDI_RANGE_0191_PID 0x0191
|
|
#define MTXORB_FTDI_RANGE_0192_PID 0x0192
|
|
#define MTXORB_FTDI_RANGE_0193_PID 0x0193
|
|
#define MTXORB_FTDI_RANGE_0194_PID 0x0194
|
|
#define MTXORB_FTDI_RANGE_0195_PID 0x0195
|
|
#define MTXORB_FTDI_RANGE_0196_PID 0x0196
|
|
#define MTXORB_FTDI_RANGE_0197_PID 0x0197
|
|
#define MTXORB_FTDI_RANGE_0198_PID 0x0198
|
|
#define MTXORB_FTDI_RANGE_0199_PID 0x0199
|
|
#define MTXORB_FTDI_RANGE_019A_PID 0x019A
|
|
#define MTXORB_FTDI_RANGE_019B_PID 0x019B
|
|
#define MTXORB_FTDI_RANGE_019C_PID 0x019C
|
|
#define MTXORB_FTDI_RANGE_019D_PID 0x019D
|
|
#define MTXORB_FTDI_RANGE_019E_PID 0x019E
|
|
#define MTXORB_FTDI_RANGE_019F_PID 0x019F
|
|
#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
|
|
#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
|
|
#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
|
|
#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
|
|
#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
|
|
#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
|
|
#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
|
|
#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
|
|
#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
|
|
#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
|
|
#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
|
|
#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
|
|
#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
|
|
#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
|
|
#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
|
|
#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
|
|
#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
|
|
#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
|
|
#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
|
|
#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
|
|
#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
|
|
#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
|
|
#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
|
|
#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
|
|
#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
|
|
#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
|
|
#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
|
|
#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
|
|
#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
|
|
#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
|
|
#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
|
|
#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
|
|
#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
|
|
#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
|
|
#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
|
|
#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
|
|
#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
|
|
#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
|
|
#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
|
|
#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
|
|
#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
|
|
#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
|
|
#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
|
|
#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
|
|
#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
|
|
#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
|
|
#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
|
|
#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
|
|
#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
|
|
#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
|
|
#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
|
|
#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
|
|
#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
|
|
#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
|
|
#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
|
|
#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
|
|
#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
|
|
#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
|
|
#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
|
|
#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
|
|
#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
|
|
#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
|
|
#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
|
|
#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
|
|
#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
|
|
#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
|
|
#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
|
|
#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
|
|
#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
|
|
#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
|
|
#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
|
|
#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
|
|
#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
|
|
#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
|
|
#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
|
|
#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
|
|
#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
|
|
#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
|
|
#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
|
|
#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
|
|
#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
|
|
#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
|
|
#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
|
|
#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
|
|
#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
|
|
#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
|
|
#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
|
|
#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
|
|
#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
|
|
#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
|
|
#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
|
|
#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
|
|
#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
|
|
#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
|
|
#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
|
|
#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
|
|
|
|
|
|
|
|
/*
|
|
* The Mobility Lab (TML)
|
|
* Submitted by Pierre Castella
|
|
*/
|
|
#define TML_VID 0x1B91 /* Vendor ID */
|
|
#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
|
|
|
|
/* Alti-2 products http://www.alti-2.com */
|
|
#define ALTI2_VID 0x1BC9
|
|
#define ALTI2_N3_PID 0x6001 /* Neptune 3 */
|
|
|
|
/*
|
|
* Ionics PlugComputer
|
|
*/
|
|
#define IONICS_VID 0x1c0c
|
|
#define IONICS_PLUGCOMPUTER_PID 0x0102
|
|
|
|
/*
|
|
* Dresden Elektronik Sensor Terminal Board
|
|
*/
|
|
#define DE_VID 0x1cf1 /* Vendor ID */
|
|
#define STB_PID 0x0001 /* Sensor Terminal Board */
|
|
#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
|
|
|
|
/*
|
|
* STMicroelectonics
|
|
*/
|
|
#define ST_VID 0x0483
|
|
#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */
|
|
|
|
/*
|
|
* Papouch products (http://www.papouch.com/)
|
|
* Submitted by Folkert van Heusden
|
|
*/
|
|
|
|
#define PAPOUCH_VID 0x5050 /* Vendor ID */
|
|
#define PAPOUCH_SB485_PID 0x0100 /* Papouch SB485 USB-485/422 Converter */
|
|
#define PAPOUCH_AP485_PID 0x0101 /* AP485 USB-RS485 Converter */
|
|
#define PAPOUCH_SB422_PID 0x0102 /* Papouch SB422 USB-RS422 Converter */
|
|
#define PAPOUCH_SB485_2_PID 0x0103 /* Papouch SB485 USB-485/422 Converter */
|
|
#define PAPOUCH_AP485_2_PID 0x0104 /* AP485 USB-RS485 Converter */
|
|
#define PAPOUCH_SB422_2_PID 0x0105 /* Papouch SB422 USB-RS422 Converter */
|
|
#define PAPOUCH_SB485S_PID 0x0106 /* Papouch SB485S USB-485/422 Converter */
|
|
#define PAPOUCH_SB485C_PID 0x0107 /* Papouch SB485C USB-485/422 Converter */
|
|
#define PAPOUCH_LEC_PID 0x0300 /* LEC USB Converter */
|
|
#define PAPOUCH_SB232_PID 0x0301 /* Papouch SB232 USB-RS232 Converter */
|
|
#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
|
|
#define PAPOUCH_IRAMP_PID 0x0500 /* Papouch IRAmp Duplex */
|
|
#define PAPOUCH_DRAK5_PID 0x0700 /* Papouch DRAK5 */
|
|
#define PAPOUCH_QUIDO8x8_PID 0x0800 /* Papouch Quido 8/8 Module */
|
|
#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Papouch Quido 4/4 Module */
|
|
#define PAPOUCH_QUIDO2x2_PID 0x0a00 /* Papouch Quido 2/2 Module */
|
|
#define PAPOUCH_QUIDO10x1_PID 0x0b00 /* Papouch Quido 10/1 Module */
|
|
#define PAPOUCH_QUIDO30x3_PID 0x0c00 /* Papouch Quido 30/3 Module */
|
|
#define PAPOUCH_QUIDO60x3_PID 0x0d00 /* Papouch Quido 60(100)/3 Module */
|
|
#define PAPOUCH_QUIDO2x16_PID 0x0e00 /* Papouch Quido 2/16 Module */
|
|
#define PAPOUCH_QUIDO3x32_PID 0x0f00 /* Papouch Quido 3/32 Module */
|
|
#define PAPOUCH_DRAK6_PID 0x1000 /* Papouch DRAK6 */
|
|
#define PAPOUCH_UPSUSB_PID 0x8000 /* Papouch UPS-USB adapter */
|
|
#define PAPOUCH_MU_PID 0x8001 /* MU controller */
|
|
#define PAPOUCH_SIMUKEY_PID 0x8002 /* Papouch SimuKey */
|
|
#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */
|
|
#define PAPOUCH_GMUX_PID 0x8004 /* Papouch GOLIATH MUX */
|
|
#define PAPOUCH_GMSR_PID 0x8005 /* Papouch GOLIATH MSR */
|
|
|
|
/*
|
|
* Marvell SheevaPlug
|
|
*/
|
|
#define MARVELL_VID 0x9e88
|
|
#define MARVELL_SHEEVAPLUG_PID 0x9e8f
|
|
|
|
/*
|
|
* Evolution Robotics products (http://www.evolution.com/).
|
|
* Submitted by Shawn M. Lavelle.
|
|
*/
|
|
#define EVOLUTION_VID 0xDEEE /* Vendor ID */
|
|
#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */
|
|
#define EVO_8U232AM_PID 0x02FF /* Evolution robotics RCM2 (FT232AM)*/
|
|
#define EVO_HYBRID_PID 0x0302 /* Evolution robotics RCM4 PID (FT232BM)*/
|
|
#define EVO_RCM4_PID 0x0303 /* Evolution robotics RCM4 PID */
|
|
|
|
/*
|
|
* MJS Gadgets HD Radio / XM Radio / Sirius Radio interfaces (using VID 0x0403)
|
|
*/
|
|
#define MJSG_GENERIC_PID 0x9378
|
|
#define MJSG_SR_RADIO_PID 0x9379
|
|
#define MJSG_XM_RADIO_PID 0x937A
|
|
#define MJSG_HD_RADIO_PID 0x937C
|
|
|
|
/*
|
|
* D.O.Tec products (http://www.directout.eu)
|
|
*/
|
|
#define FTDI_DOTEC_PID 0x9868
|
|
|
|
/*
|
|
* Xverve Signalyzer tools (http://www.signalyzer.com/)
|
|
*/
|
|
#define XVERVE_SIGNALYZER_ST_PID 0xBCA0
|
|
#define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1
|
|
#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2
|
|
#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4
|
|
|
|
/*
|
|
* Segway Robotic Mobility Platform USB interface (using VID 0x0403)
|
|
* Submitted by John G. Rogers
|
|
*/
|
|
#define SEGWAY_RMP200_PID 0xe729
|
|
|
|
|
|
/*
|
|
* Accesio USB Data Acquisition products (http://www.accesio.com/)
|
|
*/
|
|
#define ACCESIO_COM4SM_PID 0xD578
|
|
|
|
/* www.sciencescope.co.uk educational dataloggers */
|
|
#define FTDI_SCIENCESCOPE_LOGBOOKML_PID 0xFF18
|
|
#define FTDI_SCIENCESCOPE_LS_LOGBOOK_PID 0xFF1C
|
|
#define FTDI_SCIENCESCOPE_HS_LOGBOOK_PID 0xFF1D
|
|
|
|
/*
|
|
* Milkymist One JTAG/Serial
|
|
*/
|
|
#define QIHARDWARE_VID 0x20B7
|
|
#define MILKYMISTONE_JTAGSERIAL_PID 0x0713
|
|
|
|
/*
|
|
* CTI GmbH RS485 Converter http://www.cti-lean.com/
|
|
*/
|
|
/* USB-485-Mini*/
|
|
#define FTDI_CTI_MINI_PID 0xF608
|
|
/* USB-Nano-485*/
|
|
#define FTDI_CTI_NANO_PID 0xF60B
|
|
|
|
|