WSL2-Linux-Kernel/arch/arm/boot/dts/kirkwood-98dx4122.dtsi

52 строки
1.1 KiB
Plaintext

/ {
mbus@f1000000 {
pciec: pcie-controller@82000000 {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>;
pcie0: pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
};
};
};
ocp@f1000000 {
pinctrl: pin-controller@10000 {
compatible = "marvell,98dx4122-pinctrl";
};
};
};
&sata_phy0 {
status = "disabled";
};
&sata_phy1 {
status = "disabled";
};