5979 строки
167 KiB
C
5979 строки
167 KiB
C
/*
|
|
* sbpcd.c CD-ROM device driver for the whole family of traditional,
|
|
* non-ATAPI IDE-style Matsushita/Panasonic CR-5xx drives.
|
|
* Works with SoundBlaster compatible cards and with "no-sound"
|
|
* interface cards like Lasermate, Panasonic CI-101P, Teac, ...
|
|
* Also for the Longshine LCS-7260 drive.
|
|
* Also for the IBM "External ISA CD-Rom" drive.
|
|
* Also for the CreativeLabs CD200 drive.
|
|
* Also for the TEAC CD-55A drive.
|
|
* Also for the ECS-AT "Vertos 100" drive.
|
|
* Not for Sanyo drives (but for the H94A, sjcd is there...).
|
|
* Not for any other Funai drives than the CD200 types (sometimes
|
|
* labelled E2550UA or MK4015 or 2800F).
|
|
*/
|
|
|
|
#define VERSION "v4.63 Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000"
|
|
|
|
/* Copyright (C) 1993, 1994, 1995 Eberhard Moenkeberg <emoenke@gwdg.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* (for example /usr/src/linux/COPYING); if not, write to the Free
|
|
* Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* If you change this software, you should mail a .diff file with some
|
|
* description lines to emoenke@gwdg.de. I want to know about it.
|
|
*
|
|
* If you are the editor of a Linux CD, you should enable sbpcd.c within
|
|
* your boot floppy kernel and send me one of your CDs for free.
|
|
*
|
|
* If you would like to port the driver to an other operating system (f.e.
|
|
* FreeBSD or NetBSD) or use it as an information source, you shall not be
|
|
* restricted by the GPL under the following conditions:
|
|
* a) the source code of your work is freely available
|
|
* b) my part of the work gets mentioned at all places where your
|
|
* authorship gets mentioned
|
|
* c) I receive a copy of your code together with a full installation
|
|
* package of your operating system for free.
|
|
*
|
|
*
|
|
* VERSION HISTORY
|
|
*
|
|
* 0.1 initial release, April/May 93, after mcd.c (Martin Harriss)
|
|
*
|
|
* 0.2 thek "repeat:"-loop in do_sbpcd_request did not check for
|
|
* end-of-request_queue (resulting in kernel panic).
|
|
* Flow control seems stable, but throughput is not better.
|
|
*
|
|
* 0.3 interrupt locking totally eliminated (maybe "inb" and "outb"
|
|
* are still locking) - 0.2 made keyboard-type-ahead losses.
|
|
* check_sbpcd_media_change added (to use by isofs/inode.c)
|
|
* - but it detects almost nothing.
|
|
*
|
|
* 0.4 use MAJOR 25 definitely.
|
|
* Almost total re-design to support double-speed drives and
|
|
* "naked" (no sound) interface cards ("LaserMate" interface type).
|
|
* Flow control should be exact now.
|
|
* Don't occupy the SbPro IRQ line (not needed either); will
|
|
* live together with Hannu Savolainen's sndkit now.
|
|
* Speeded up data transfer to 150 kB/sec, with help from Kai
|
|
* Makisara, the "provider" of the "mt" tape utility.
|
|
* Give "SpinUp" command if necessary.
|
|
* First steps to support up to 4 drives (but currently only one).
|
|
* Implemented audio capabilities - workman should work, xcdplayer
|
|
* gives some problems.
|
|
* This version is still consuming too much CPU time, and
|
|
* sleeping still has to be worked on.
|
|
* During "long" implied seeks, it seems possible that a
|
|
* ReadStatus command gets ignored. That gives the message
|
|
* "ResponseStatus timed out" (happens about 6 times here during
|
|
* a "ls -alR" of the YGGDRASIL LGX-Beta CD). Such a case is
|
|
* handled without data error, but it should get done better.
|
|
*
|
|
* 0.5 Free CPU during waits (again with help from Kai Makisara).
|
|
* Made it work together with the LILO/kernel setup standard.
|
|
* Included auto-probing code, as suggested by YGGDRASIL.
|
|
* Formal redesign to add DDI debugging.
|
|
* There are still flaws in IOCTL (workman with double speed drive).
|
|
*
|
|
* 1.0 Added support for all drive IDs (0...3, no longer only 0)
|
|
* and up to 4 drives on one controller.
|
|
* Added "#define MANY_SESSION" for "old" multi session CDs.
|
|
*
|
|
* 1.1 Do SpinUp for new drives, too.
|
|
* Revised for clean compile under "old" kernels (0.99pl9).
|
|
*
|
|
* 1.2 Found the "workman with double-speed drive" bug: use the driver's
|
|
* audio_state, not what the drive is reporting with ReadSubQ.
|
|
*
|
|
* 1.3 Minor cleanups.
|
|
* Refinements regarding Workman.
|
|
*
|
|
* 1.4 Read XA disks (PhotoCDs) with "old" drives, too (but only the first
|
|
* session - no chance to fully access a "multi-session" CD).
|
|
* This currently still is too slow (50 kB/sec) - but possibly
|
|
* the old drives won't do it faster.
|
|
* Implemented "door (un)lock" for new drives (still does not work
|
|
* as wanted - no lock possible after an unlock).
|
|
* Added some debugging printout for the UPC/EAN code - but my drives
|
|
* return only zeroes. Is there no UPC/EAN code written?
|
|
*
|
|
* 1.5 Laborate with UPC/EAN code (not better yet).
|
|
* Adapt to kernel 1.1.8 change (have to explicitly include
|
|
* <linux/string.h> now).
|
|
*
|
|
* 1.6 Trying to read audio frames as data. Impossible with the current
|
|
* drive firmware levels, as it seems. Awaiting any hint. ;-)
|
|
* Changed "door unlock": repeat it until success.
|
|
* Changed CDROMSTOP routine (stop somewhat "softer" so that Workman
|
|
* won't get confused).
|
|
* Added a third interface type: Sequoia S-1000, as used with the SPEA
|
|
* Media FX sound card. This interface (usable for Sony and Mitsumi
|
|
* drives, too) needs a special configuration setup and behaves like a
|
|
* LaserMate type after that. Still experimental - I do not have such
|
|
* an interface.
|
|
* Use the "variable BLOCK_SIZE" feature (2048). But it does only work
|
|
* if you give the mount option "block=2048".
|
|
* The media_check routine is currently disabled; now that it gets
|
|
* called as it should I fear it must get synchronized for not to
|
|
* disturb the normal driver's activity.
|
|
*
|
|
* 2.0 Version number bumped - two reasons:
|
|
* - reading audio tracks as data works now with CR-562 and CR-563. We
|
|
* currently do it by an IOCTL (yet has to get standardized), one frame
|
|
* at a time; that is pretty slow. But it works.
|
|
* - we are maintaining now up to 4 interfaces (each up to 4 drives):
|
|
* did it the easy way - a different MAJOR (25, 26, ...) and a different
|
|
* copy of the driver (sbpcd.c, sbpcd2.c, sbpcd3.c, sbpcd4.c - only
|
|
* distinguished by the value of SBPCD_ISSUE and the driver's name),
|
|
* and a common sbpcd.h file.
|
|
* Bettered the "ReadCapacity error" problem with old CR-52x drives (the
|
|
* drives sometimes need a manual "eject/insert" before work): just
|
|
* reset the drive and do again. Needs lots of resets here and sometimes
|
|
* that does not cure, so this can't be the solution.
|
|
*
|
|
* 2.1 Found bug with multisession CDs (accessing frame 16).
|
|
* "read audio" works now with address type CDROM_MSF, too.
|
|
* Bigger audio frame buffer: allows reading max. 4 frames at time; this
|
|
* gives a significant speedup, but reading more than one frame at once
|
|
* gives missing chunks at each single frame boundary.
|
|
*
|
|
* 2.2 Kernel interface cleanups: timers, init, setup, media check.
|
|
*
|
|
* 2.3 Let "door lock" and "eject" live together.
|
|
* Implemented "close tray" (done automatically during open).
|
|
*
|
|
* 2.4 Use different names for device registering.
|
|
*
|
|
* 2.5 Added "#if EJECT" code (default: enabled) to automatically eject
|
|
* the tray during last call to "sbpcd_release".
|
|
* Added "#if JUKEBOX" code (default: disabled) to automatically eject
|
|
* the tray during call to "sbpcd_open" if no disk is in.
|
|
* Turn on the CD volume of "compatible" sound cards, too; just define
|
|
* SOUND_BASE (in sbpcd.h) accordingly (default: disabled).
|
|
*
|
|
* 2.6 Nothing new.
|
|
*
|
|
* 2.7 Added CDROMEJECT_SW ioctl to set the "EJECT" behavior on the fly:
|
|
* 0 disables, 1 enables auto-ejecting. Useful to keep the tray in
|
|
* during shutdown.
|
|
*
|
|
* 2.8 Added first support (still BETA, I need feedback or a drive) for
|
|
* the Longshine LCS-7260 drives. They appear as double-speed drives
|
|
* using the "old" command scheme, extended by tray control and door
|
|
* lock functions.
|
|
* Found (and fixed preliminary) a flaw with some multisession CDs: we
|
|
* have to re-direct not only the accesses to frame 16 (the isofs
|
|
* routines drive it up to max. 100), but also those to the continuation
|
|
* (repetition) frames (as far as they exist - currently set fix as
|
|
* 16..20).
|
|
* Changed default of the "JUKEBOX" define. If you use this default,
|
|
* your tray will eject if you try to mount without a disk in. Next
|
|
* mount command will insert the tray - so, just fill in a disk. ;-)
|
|
*
|
|
* 2.9 Fulfilled the Longshine LCS-7260 support; with great help and
|
|
* experiments by Serge Robyns.
|
|
* First attempts to support the TEAC CD-55A drives; but still not
|
|
* usable yet.
|
|
* Implemented the CDROMMULTISESSION ioctl; this is an attempt to handle
|
|
* multi session CDs more "transparent" (redirection handling has to be
|
|
* done within the isofs routines, and only for the special purpose of
|
|
* obtaining the "right" volume descriptor; accesses to the raw device
|
|
* should not get redirected).
|
|
*
|
|
* 3.0 Just a "normal" increment, with some provisions to do it better. ;-)
|
|
* Introduced "#define READ_AUDIO" to specify the maximum number of
|
|
* audio frames to grab with one request. This defines a buffer size
|
|
* within kernel space; a value of 0 will reserve no such space and
|
|
* disable the CDROMREADAUDIO ioctl. A value of 75 enables the reading
|
|
* of a whole second with one command, but will use a buffer of more
|
|
* than 172 kB.
|
|
* Started CD200 support. Drive detection should work, but nothing
|
|
* more.
|
|
*
|
|
* 3.1 Working to support the CD200 and the Teac CD-55A drives.
|
|
* AT-BUS style device numbering no longer used: use SCSI style now.
|
|
* So, the first "found" device has MINOR 0, regardless of the
|
|
* jumpered drive ID. This implies modifications to the /dev/sbpcd*
|
|
* entries for some people, but will help the DAU (german TLA, english:
|
|
* "newbie", maybe ;-) to install his "first" system from a CD.
|
|
*
|
|
* 3.2 Still testing with CD200 and CD-55A drives.
|
|
*
|
|
* 3.3 Working with CD200 support.
|
|
*
|
|
* 3.4 Auto-probing stops if an address of 0 is seen (to be entered with
|
|
* the kernel command line).
|
|
* Made the driver "loadable". If used as a module, "audio copy" is
|
|
* disabled, and the internal read ahead data buffer has a reduced size
|
|
* of 4 kB; so, throughput may be reduced a little bit with slow CPUs.
|
|
*
|
|
* 3.5 Provisions to handle weird photoCDs which have an interrupted
|
|
* "formatting" immediately after the last frames of some files: simply
|
|
* never "read ahead" with MultiSession CDs. By this, CPU usage may be
|
|
* increased with those CDs, and there may be a loss in speed.
|
|
* Re-structured the messaging system.
|
|
* The "loadable" version no longer has a limited READ_AUDIO buffer
|
|
* size.
|
|
* Removed "MANY_SESSION" handling for "old" multi session CDs.
|
|
* Added "private" IOCTLs CDROMRESET and CDROMVOLREAD.
|
|
* Started again to support the TEAC CD-55A drives, now that I found
|
|
* the money for "my own" drive. ;-)
|
|
* The TEAC CD-55A support is fairly working now.
|
|
* I have measured that the drive "delivers" at 600 kB/sec (even with
|
|
* bigger requests than the drive's 64 kB buffer can satisfy), but
|
|
* the "real" rate does not exceed 520 kB/sec at the moment.
|
|
* Caused by the various changes to build in TEAC support, the timed
|
|
* loops are de-optimized at the moment (less throughput with CR-52x
|
|
* drives, and the TEAC will give speed only with SBP_BUFFER_FRAMES 64).
|
|
*
|
|
* 3.6 Fixed TEAC data read problems with SbPro interfaces.
|
|
* Initial size of the READ_AUDIO buffer is 0. Can get set to any size
|
|
* during runtime.
|
|
*
|
|
* 3.7 Introduced MAX_DRIVES for some poor interface cards (seen with TEAC
|
|
* drives) which allow only one drive (ID 0); this avoids repetitive
|
|
* detection under IDs 1..3.
|
|
* Elongated cmd_out_T response waiting; necessary for photo CDs with
|
|
* a lot of sessions.
|
|
* Bettered the sbpcd_open() behavior with TEAC drives.
|
|
*
|
|
* 3.8 Elongated max_latency for CR-56x drives.
|
|
*
|
|
* 3.9 Finally fixed the long-known SoundScape/SPEA/Sequoia S-1000 interface
|
|
* configuration bug.
|
|
* Now Corey, Heiko, Ken, Leo, Vadim/Eric & Werner are invited to copy
|
|
* the config_spea() routine into their drivers. ;-)
|
|
*
|
|
* 4.0 No "big step" - normal version increment.
|
|
* Adapted the benefits from 1.3.33.
|
|
* Fiddled with CDROMREADAUDIO flaws.
|
|
* Avoid ReadCapacity command with CD200 drives (the MKE 1.01 version
|
|
* seems not to support it).
|
|
* Fulfilled "read audio" for CD200 drives, with help of Pete Heist
|
|
* (heistp@rpi.edu).
|
|
*
|
|
* 4.1 Use loglevel KERN_INFO with printk().
|
|
* Added support for "Vertos 100" drive ("ECS-AT") - it is very similar
|
|
* to the Longshine LCS-7260. Give feedback if you can - I never saw
|
|
* such a drive, and I have no specs.
|
|
*
|
|
* 4.2 Support for Teac 16-bit interface cards. Can't get auto-detected,
|
|
* so you have to jumper your card to 0x2C0. Still not 100% - come
|
|
* in contact if you can give qualified feedback.
|
|
* Use loglevel KERN_NOTICE with printk(). If you get annoyed by a
|
|
* flood of unwanted messages and the accompanied delay, try to read
|
|
* my documentation. Especially the Linux CDROM drivers have to do an
|
|
* important job for the newcomers, so the "distributed" version has
|
|
* to fit some special needs. Since generations, the flood of messages
|
|
* is user-configurable (even at runtime), but to get aware of this, one
|
|
* needs a special mental quality: the ability to read.
|
|
*
|
|
* 4.3 CD200F does not like to receive a command while the drive is
|
|
* reading the ToC; still trying to solve it.
|
|
* Removed some redundant verify_area calls (yes, Heiko Eissfeldt
|
|
* is visiting all the Linux CDROM drivers ;-).
|
|
*
|
|
* 4.4 Adapted one idea from tiensivu@pilot.msu.edu's "stripping-down"
|
|
* experiments: "KLOGD_PAUSE".
|
|
* Inhibited "play audio" attempts with data CDs. Provisions for a
|
|
* "data-safe" handling of "mixed" (data plus audio) Cds.
|
|
*
|
|
* 4.5 Meanwhile Gonzalo Tornaria <tornaria@cmat.edu.uy> (GTL) built a
|
|
* special end_request routine: we seem to have to take care for not
|
|
* to have two processes working at the request list. My understanding
|
|
* was and is that ll_rw_blk should not call do_sbpcd_request as long
|
|
* as there is still one call active (the first call will care for all
|
|
* outstanding I/Os, and if a second call happens, that is a bug in
|
|
* ll_rw_blk.c).
|
|
* "Check media change" without touching any drive.
|
|
*
|
|
* 4.6 Use a semaphore to synchronize multi-activity; elaborated by Rob
|
|
* Riggs <rriggs@tesser.com>. At the moment, we simply block "read"
|
|
* against "ioctl" and vice versa. This could be refined further, but
|
|
* I guess with almost no performance increase.
|
|
* Experiments to speed up the CD-55A; again with help of Rob Riggs
|
|
* (to be true, he gave both, idea & code. ;-)
|
|
*
|
|
* 4.61 Ported to Uniform CD-ROM driver by
|
|
* Heiko Eissfeldt <heiko@colossus.escape.de> with additional
|
|
* changes by Erik Andersen <andersee@debian.org>
|
|
*
|
|
* 4.62 Fix a bug where playing audio left the drive in an unusable state.
|
|
* Heiko Eissfeldt <heiko@colossus.escape.de>
|
|
*
|
|
* November 1999 -- Make kernel-parameter implementation work with 2.3.x
|
|
* Removed init_module & cleanup_module in favor of
|
|
* module_init & module_exit.
|
|
* Torben Mathiasen <tmm@image.dk>
|
|
*
|
|
* 4.63 Bug fixes for audio annoyances, new legacy CDROM maintainer.
|
|
* Annoying things fixed:
|
|
* TOC reread on automated disk changes
|
|
* TOC reread on manual cd changes
|
|
* Play IOCTL tries to play CD before it's actually ready... sometimes.
|
|
* CD_AUDIO_COMPLETED state so workman (and other playes) can repeat play.
|
|
* Andrew J. Kroll <ag784@freenet.buffalo.edu> Wed Jul 26 04:24:10 EDT 2000
|
|
*
|
|
* 4.64 Fix module parameters - were being completely ignored.
|
|
* Can also specify max_drives=N as a setup int to get rid of
|
|
* "ghost" drives on crap hardware (aren't they all?) Paul Gortmaker
|
|
*
|
|
* TODO
|
|
* implement "read all subchannel data" (96 bytes per frame)
|
|
* remove alot of the virtual status bits and deal with hardware status
|
|
* move the change of cd for audio to a better place
|
|
* add debug levels to insmod parameters (trivial)
|
|
*
|
|
* special thanks to Kai Makisara (kai.makisara@vtt.fi) for his fine
|
|
* elaborated speed-up experiments (and the fabulous results!), for
|
|
* the "push" towards load-free wait loops, and for the extensive mail
|
|
* thread which brought additional hints and bug fixes.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Trying to merge requests breaks this driver horribly (as in it goes
|
|
* boom and apparently has done so since 2.3.41). As it is a legacy
|
|
* driver for a horribly slow double speed CD on a hideous interface
|
|
* designed for polled operation, I won't lose any sleep in simply
|
|
* disallowing merging. Paul G. 02/2001
|
|
*
|
|
* Thu May 30 14:14:47 CEST 2002:
|
|
*
|
|
* I have presumably found the reson for the above - there was a bogous
|
|
* end_request substitute, which was manipulating the request queues
|
|
* incorrectly. If someone has access to the actual hardware, and it's
|
|
* still operations - well please free to test it.
|
|
*
|
|
* Marcin Dalecki
|
|
*/
|
|
|
|
/*
|
|
* Add bio/kdev_t changes for 2.5.x required to make it work again.
|
|
* Still room for improvement in the request handling here if anyone
|
|
* actually cares. Bring your own chainsaw. Paul G. 02/2002
|
|
*/
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/cdrom.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/devfs_fs_kernel.h>
|
|
#include <linux/major.h>
|
|
#include <linux/string.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
#include <stdarg.h>
|
|
#include <linux/config.h>
|
|
#include "sbpcd.h"
|
|
|
|
#define MAJOR_NR MATSUSHITA_CDROM_MAJOR
|
|
#include <linux/blkdev.h>
|
|
|
|
/*==========================================================================*/
|
|
#if SBPCD_DIS_IRQ
|
|
# define SBPCD_CLI cli()
|
|
# define SBPCD_STI sti()
|
|
#else
|
|
# define SBPCD_CLI
|
|
# define SBPCD_STI
|
|
#endif
|
|
|
|
/*==========================================================================*/
|
|
/*
|
|
* auto-probing address list
|
|
* inspired by Adam J. Richter from Yggdrasil
|
|
*
|
|
* still not good enough - can cause a hang.
|
|
* example: a NE 2000 ethernet card at 300 will cause a hang probing 310.
|
|
* if that happens, reboot and use the LILO (kernel) command line.
|
|
* The possibly conflicting ethernet card addresses get NOT probed
|
|
* by default - to minimize the hang possibilities.
|
|
*
|
|
* The SB Pro addresses get "mirrored" at 0x6xx and some more locations - to
|
|
* avoid a type error, the 0x2xx-addresses must get checked before 0x6xx.
|
|
*
|
|
* send mail to emoenke@gwdg.de if your interface card is not FULLY
|
|
* represented here.
|
|
*/
|
|
static int sbpcd[] =
|
|
{
|
|
CDROM_PORT, SBPRO, /* probe with user's setup first */
|
|
#if DISTRIBUTION
|
|
0x230, 1, /* Soundblaster Pro and 16 (default) */
|
|
#if 0
|
|
0x300, 0, /* CI-101P (default), WDH-7001C (default),
|
|
Galaxy (default), Reveal (one default) */
|
|
0x250, 1, /* OmniCD default, Soundblaster Pro and 16 */
|
|
0x2C0, 3, /* Teac 16-bit cards */
|
|
0x260, 1, /* OmniCD */
|
|
0x320, 0, /* Lasermate, CI-101P, WDH-7001C, Galaxy, Reveal (other default),
|
|
Longshine LCS-6853 (default) */
|
|
0x338, 0, /* Reveal Sound Wave 32 card model #SC600 */
|
|
0x340, 0, /* Mozart sound card (default), Lasermate, CI-101P */
|
|
0x360, 0, /* Lasermate, CI-101P */
|
|
0x270, 1, /* Soundblaster 16 */
|
|
0x670, 0, /* "sound card #9" */
|
|
0x690, 0, /* "sound card #9" */
|
|
0x338, 2, /* SPEA Media FX, Ensonic SoundScape (default) */
|
|
0x328, 2, /* SPEA Media FX */
|
|
0x348, 2, /* SPEA Media FX */
|
|
0x634, 0, /* some newer sound cards */
|
|
0x638, 0, /* some newer sound cards */
|
|
0x230, 1, /* some newer sound cards */
|
|
/* due to incomplete address decoding of the SbPro card, these must be last */
|
|
0x630, 0, /* "sound card #9" (default) */
|
|
0x650, 0, /* "sound card #9" */
|
|
#ifdef MODULE
|
|
/*
|
|
* some "hazardous" locations (no harm with the loadable version)
|
|
* (will stop the bus if a NE2000 ethernet card resides at offset -0x10)
|
|
*/
|
|
0x330, 0, /* Lasermate, CI-101P, WDH-7001C */
|
|
0x350, 0, /* Lasermate, CI-101P */
|
|
0x358, 2, /* SPEA Media FX */
|
|
0x370, 0, /* Lasermate, CI-101P */
|
|
0x290, 1, /* Soundblaster 16 */
|
|
0x310, 0, /* Lasermate, CI-101P, WDH-7001C */
|
|
#endif /* MODULE */
|
|
#endif
|
|
#endif /* DISTRIBUTION */
|
|
};
|
|
|
|
/*
|
|
* Protects access to global structures etc.
|
|
*/
|
|
static __cacheline_aligned DEFINE_SPINLOCK(sbpcd_lock);
|
|
static struct request_queue *sbpcd_queue;
|
|
|
|
MODULE_PARM(sbpcd, "2i");
|
|
MODULE_PARM(max_drives, "i");
|
|
|
|
#define NUM_PROBE (sizeof(sbpcd) / sizeof(int))
|
|
|
|
/*==========================================================================*/
|
|
|
|
#define INLINE inline
|
|
|
|
/*==========================================================================*/
|
|
/*
|
|
* the forward references:
|
|
*/
|
|
static void sbp_sleep(u_int);
|
|
static void mark_timeout_delay(u_long);
|
|
static void mark_timeout_data(u_long);
|
|
#if 0
|
|
static void mark_timeout_audio(u_long);
|
|
#endif
|
|
static void sbp_read_cmd(struct request *req);
|
|
static int sbp_data(struct request *req);
|
|
static int cmd_out(void);
|
|
static int DiskInfo(void);
|
|
|
|
/*==========================================================================*/
|
|
|
|
/*
|
|
* pattern for printk selection:
|
|
*
|
|
* (1<<DBG_INF) necessary information
|
|
* (1<<DBG_BSZ) BLOCK_SIZE trace
|
|
* (1<<DBG_REA) "read" status trace
|
|
* (1<<DBG_CHK) "media check" trace
|
|
* (1<<DBG_TIM) datarate timer test
|
|
* (1<<DBG_INI) initialization trace
|
|
* (1<<DBG_TOC) tell TocEntry values
|
|
* (1<<DBG_IOC) ioctl trace
|
|
* (1<<DBG_STA) "ResponseStatus" trace
|
|
* (1<<DBG_ERR) "cc_ReadError" trace
|
|
* (1<<DBG_CMD) "cmd_out" trace
|
|
* (1<<DBG_WRN) give explanation before auto-probing
|
|
* (1<<DBG_MUL) multi session code test
|
|
* (1<<DBG_IDX) "drive_id != 0" test code
|
|
* (1<<DBG_IOX) some special information
|
|
* (1<<DBG_DID) drive ID test
|
|
* (1<<DBG_RES) drive reset info
|
|
* (1<<DBG_SPI) SpinUp test info
|
|
* (1<<DBG_IOS) ioctl trace: "subchannel"
|
|
* (1<<DBG_IO2) ioctl trace: general
|
|
* (1<<DBG_UPC) show UPC info
|
|
* (1<<DBG_XA1) XA mode debugging
|
|
* (1<<DBG_LCK) door (un)lock info
|
|
* (1<<DBG_SQ1) dump SubQ frame
|
|
* (1<<DBG_AUD) "read audio" debugging
|
|
* (1<<DBG_SEQ) Sequoia interface configuration trace
|
|
* (1<<DBG_LCS) Longshine LCS-7260 debugging trace
|
|
* (1<<DBG_CD2) MKE/Funai CD200 debugging trace
|
|
* (1<<DBG_TEA) TEAC CD-55A debugging trace
|
|
* (1<<DBG_ECS) ECS-AT (Vertos-100) debugging trace
|
|
* (1<<DBG_000) unnecessary information
|
|
*/
|
|
#if DISTRIBUTION
|
|
static int sbpcd_debug = (1<<DBG_INF);
|
|
#else
|
|
static int sbpcd_debug = 0 & ((1<<DBG_INF) |
|
|
(1<<DBG_TOC) |
|
|
(1<<DBG_MUL) |
|
|
(1<<DBG_UPC));
|
|
#endif /* DISTRIBUTION */
|
|
|
|
static int sbpcd_ioaddr = CDROM_PORT; /* default I/O base address */
|
|
static int sbpro_type = SBPRO;
|
|
static unsigned char f_16bit;
|
|
static unsigned char do_16bit;
|
|
static int CDo_command, CDo_reset;
|
|
static int CDo_sel_i_d, CDo_enable;
|
|
static int CDi_info, CDi_status, CDi_data;
|
|
static struct cdrom_msf msf;
|
|
static struct cdrom_ti ti;
|
|
static struct cdrom_tochdr tochdr;
|
|
static struct cdrom_tocentry tocentry;
|
|
static struct cdrom_subchnl SC;
|
|
static struct cdrom_volctrl volctrl;
|
|
static struct cdrom_read_audio read_audio;
|
|
|
|
static unsigned char msgnum;
|
|
static char msgbuf[80];
|
|
|
|
static int max_drives = MAX_DRIVES;
|
|
#ifndef MODULE
|
|
static unsigned char setup_done;
|
|
static const char *str_sb_l = "soundblaster";
|
|
static const char *str_sp_l = "spea";
|
|
static const char *str_ss_l = "soundscape";
|
|
static const char *str_t16_l = "teac16bit";
|
|
static const char *str_ss = "SoundScape";
|
|
#endif
|
|
static const char *str_sb = "SoundBlaster";
|
|
static const char *str_lm = "LaserMate";
|
|
static const char *str_sp = "SPEA";
|
|
static const char *str_t16 = "Teac16bit";
|
|
static const char *type;
|
|
static const char *major_name="sbpcd";
|
|
|
|
/*==========================================================================*/
|
|
|
|
#ifdef FUTURE
|
|
static DECLARE_WAIT_QUEUE_HEAD(sbp_waitq);
|
|
#endif /* FUTURE */
|
|
|
|
static int teac=SBP_TEAC_SPEED;
|
|
static int buffers=SBP_BUFFER_FRAMES;
|
|
|
|
static u_char family0[]="MATSHITA"; /* MKE CR-521, CR-522, CR-523 */
|
|
static u_char family1[]="CR-56"; /* MKE CR-562, CR-563 */
|
|
static u_char family2[]="CD200"; /* MKE CD200, Funai CD200F */
|
|
static u_char familyL[]="LCS-7260"; /* Longshine LCS-7260 */
|
|
static u_char familyT[]="CD-55"; /* TEAC CD-55A */
|
|
static u_char familyV[]="ECS-AT"; /* ECS Vertos 100 */
|
|
|
|
static u_int recursion; /* internal testing only */
|
|
static u_int fatal_err; /* internal testing only */
|
|
static u_int response_count;
|
|
static u_int flags_cmd_out;
|
|
static u_char cmd_type;
|
|
static u_char drvcmd[10];
|
|
static u_char infobuf[20];
|
|
static u_char xa_head_buf[CD_XA_HEAD];
|
|
static u_char xa_tail_buf[CD_XA_TAIL];
|
|
|
|
#if OLD_BUSY
|
|
static volatile u_char busy_data;
|
|
static volatile u_char busy_audio; /* true semaphores would be safer */
|
|
#endif /* OLD_BUSY */
|
|
static DECLARE_MUTEX(ioctl_read_sem);
|
|
static u_long timeout;
|
|
static volatile u_char timed_out_delay;
|
|
static volatile u_char timed_out_data;
|
|
#if 0
|
|
static volatile u_char timed_out_audio;
|
|
#endif
|
|
static u_int datarate= 1000000;
|
|
static u_int maxtim16=16000000;
|
|
static u_int maxtim04= 4000000;
|
|
static u_int maxtim02= 2000000;
|
|
static u_int maxtim_8= 30000;
|
|
#if LONG_TIMING
|
|
static u_int maxtim_data= 9000;
|
|
#else
|
|
static u_int maxtim_data= 3000;
|
|
#endif /* LONG_TIMING */
|
|
#if DISTRIBUTION
|
|
static int n_retries=6;
|
|
#else
|
|
static int n_retries=6;
|
|
#endif
|
|
/*==========================================================================*/
|
|
|
|
static int ndrives;
|
|
static u_char drv_pattern[NR_SBPCD]={speed_auto,speed_auto,speed_auto,speed_auto};
|
|
|
|
/*==========================================================================*/
|
|
/*
|
|
* drive space begins here (needed separate for each unit)
|
|
*/
|
|
static struct sbpcd_drive {
|
|
char drv_id; /* "jumpered" drive ID or -1 */
|
|
char drv_sel; /* drive select lines bits */
|
|
|
|
char drive_model[9];
|
|
u_char firmware_version[4];
|
|
char f_eject; /* auto-eject flag: 0 or 1 */
|
|
u_char *sbp_buf; /* Pointer to internal data buffer,
|
|
space allocated during sbpcd_init() */
|
|
u_int sbp_bufsiz; /* size of sbp_buf (# of frames) */
|
|
int sbp_first_frame; /* First frame in buffer */
|
|
int sbp_last_frame; /* Last frame in buffer */
|
|
int sbp_read_frames; /* Number of frames being read to buffer */
|
|
int sbp_current; /* Frame being currently read */
|
|
|
|
u_char mode; /* read_mode: READ_M1, READ_M2, READ_SC, READ_AU */
|
|
u_char *aud_buf; /* Pointer to audio data buffer,
|
|
space allocated during sbpcd_init() */
|
|
u_int sbp_audsiz; /* size of aud_buf (# of raw frames) */
|
|
u_int drv_type;
|
|
u_char drv_options;
|
|
int status_bits;
|
|
u_char diskstate_flags;
|
|
u_char sense_byte;
|
|
|
|
u_char CD_changed;
|
|
char open_count;
|
|
u_char error_byte;
|
|
|
|
u_char f_multisession;
|
|
u_int lba_multi;
|
|
int first_session;
|
|
int last_session;
|
|
int track_of_last_session;
|
|
|
|
u_char audio_state;
|
|
u_int pos_audio_start;
|
|
u_int pos_audio_end;
|
|
char vol_chan0;
|
|
u_char vol_ctrl0;
|
|
char vol_chan1;
|
|
u_char vol_ctrl1;
|
|
#if 000 /* no supported drive has it */
|
|
char vol_chan2;
|
|
u_char vol_ctrl2;
|
|
char vol_chan3;
|
|
u_char vol_ctrl3;
|
|
#endif /*000 */
|
|
u_char volume_control; /* TEAC on/off bits */
|
|
|
|
u_char SubQ_ctl_adr;
|
|
u_char SubQ_trk;
|
|
u_char SubQ_pnt_idx;
|
|
u_int SubQ_run_tot;
|
|
u_int SubQ_run_trk;
|
|
u_char SubQ_whatisthis;
|
|
|
|
u_char UPC_ctl_adr;
|
|
u_char UPC_buf[7];
|
|
|
|
int frame_size;
|
|
int CDsize_frm;
|
|
|
|
u_char xa_byte; /* 0x20: XA capabilities */
|
|
u_char n_first_track; /* binary */
|
|
u_char n_last_track; /* binary (not bcd), 0x01...0x63 */
|
|
u_int size_msf; /* time of whole CD, position of LeadOut track */
|
|
u_int size_blk;
|
|
|
|
u_char TocEnt_nixbyte; /* em */
|
|
u_char TocEnt_ctl_adr;
|
|
u_char TocEnt_number;
|
|
u_char TocEnt_format; /* em */
|
|
u_int TocEnt_address;
|
|
#ifdef SAFE_MIXED
|
|
char has_data;
|
|
#endif /* SAFE_MIXED */
|
|
u_char ored_ctl_adr; /* to detect if CDROM contains data tracks */
|
|
|
|
struct {
|
|
u_char nixbyte; /* em */
|
|
u_char ctl_adr; /* 0x4x: data, 0x0x: audio */
|
|
u_char number;
|
|
u_char format; /* em */ /* 0x00: lba, 0x01: msf */
|
|
u_int address;
|
|
} TocBuffer[MAX_TRACKS+1]; /* last entry faked */
|
|
|
|
int in_SpinUp; /* CR-52x test flag */
|
|
int n_bytes; /* TEAC awaited response count */
|
|
u_char error_state, b3, b4; /* TEAC command error state */
|
|
u_char f_drv_error; /* TEAC command error flag */
|
|
u_char speed_byte;
|
|
int frmsiz;
|
|
u_char f_XA; /* 1: XA */
|
|
u_char type_byte; /* 0, 1, 3 */
|
|
u_char mode_xb_6;
|
|
u_char mode_yb_7;
|
|
u_char mode_xb_8;
|
|
u_char delay;
|
|
struct cdrom_device_info *sbpcd_infop;
|
|
struct gendisk *disk;
|
|
} D_S[NR_SBPCD];
|
|
|
|
static struct sbpcd_drive *current_drive = D_S;
|
|
|
|
/*
|
|
* drive space ends here (needed separate for each unit)
|
|
*/
|
|
/*==========================================================================*/
|
|
#if 0
|
|
unsigned long cli_sti; /* for saving the processor flags */
|
|
#endif
|
|
/*==========================================================================*/
|
|
static struct timer_list delay_timer =
|
|
TIMER_INITIALIZER(mark_timeout_delay, 0, 0);
|
|
static struct timer_list data_timer =
|
|
TIMER_INITIALIZER(mark_timeout_data, 0, 0);
|
|
#if 0
|
|
static struct timer_list audio_timer =
|
|
TIMER_INITIALIZER(mark_timeout_audio, 0, 0);
|
|
#endif
|
|
/*==========================================================================*/
|
|
/*
|
|
* DDI interface
|
|
*/
|
|
static void msg(int level, const char *fmt, ...)
|
|
{
|
|
#if DISTRIBUTION
|
|
#define MSG_LEVEL KERN_NOTICE
|
|
#else
|
|
#define MSG_LEVEL KERN_INFO
|
|
#endif /* DISTRIBUTION */
|
|
|
|
char buf[256];
|
|
va_list args;
|
|
|
|
if (!(sbpcd_debug&(1<<level))) return;
|
|
|
|
msgnum++;
|
|
if (msgnum>99) msgnum=0;
|
|
sprintf(buf, MSG_LEVEL "%s-%d [%02d]: ", major_name, current_drive - D_S, msgnum);
|
|
va_start(args, fmt);
|
|
vsprintf(&buf[18], fmt, args);
|
|
va_end(args);
|
|
printk(buf);
|
|
#if KLOGD_PAUSE
|
|
sbp_sleep(KLOGD_PAUSE); /* else messages get lost */
|
|
#endif /* KLOGD_PAUSE */
|
|
return;
|
|
}
|
|
/*==========================================================================*/
|
|
/*
|
|
* DDI interface: runtime trace bit pattern maintenance
|
|
*/
|
|
static int sbpcd_dbg_ioctl(unsigned long arg, int level)
|
|
{
|
|
switch(arg)
|
|
{
|
|
case 0: /* OFF */
|
|
sbpcd_debug = DBG_INF;
|
|
break;
|
|
|
|
default:
|
|
if (arg>=128) sbpcd_debug &= ~(1<<(arg-128));
|
|
else sbpcd_debug |= (1<<arg);
|
|
}
|
|
return (arg);
|
|
}
|
|
/*==========================================================================*/
|
|
static void mark_timeout_delay(u_long i)
|
|
{
|
|
timed_out_delay=1;
|
|
#if 0
|
|
msg(DBG_TIM,"delay timer expired.\n");
|
|
#endif
|
|
}
|
|
/*==========================================================================*/
|
|
static void mark_timeout_data(u_long i)
|
|
{
|
|
timed_out_data=1;
|
|
#if 0
|
|
msg(DBG_TIM,"data timer expired.\n");
|
|
#endif
|
|
}
|
|
/*==========================================================================*/
|
|
#if 0
|
|
static void mark_timeout_audio(u_long i)
|
|
{
|
|
timed_out_audio=1;
|
|
#if 0
|
|
msg(DBG_TIM,"audio timer expired.\n");
|
|
#endif
|
|
}
|
|
#endif
|
|
/*==========================================================================*/
|
|
/*
|
|
* Wait a little while (used for polling the drive).
|
|
*/
|
|
static void sbp_sleep(u_int time)
|
|
{
|
|
sti();
|
|
current->state = TASK_INTERRUPTIBLE;
|
|
schedule_timeout(time);
|
|
sti();
|
|
}
|
|
/*==========================================================================*/
|
|
#define RETURN_UP(rc) {up(&ioctl_read_sem); return(rc);}
|
|
/*==========================================================================*/
|
|
/*
|
|
* convert logical_block_address to m-s-f_number (3 bytes only)
|
|
*/
|
|
static INLINE void lba2msf(int lba, u_char *msf)
|
|
{
|
|
lba += CD_MSF_OFFSET;
|
|
msf[0] = lba / (CD_SECS*CD_FRAMES);
|
|
lba %= CD_SECS*CD_FRAMES;
|
|
msf[1] = lba / CD_FRAMES;
|
|
msf[2] = lba % CD_FRAMES;
|
|
}
|
|
/*==========================================================================*/
|
|
/*==========================================================================*/
|
|
/*
|
|
* convert msf-bin to msf-bcd
|
|
*/
|
|
static INLINE void bin2bcdx(u_char *p) /* must work only up to 75 or 99 */
|
|
{
|
|
*p=((*p/10)<<4)|(*p%10);
|
|
}
|
|
/*==========================================================================*/
|
|
static INLINE u_int blk2msf(u_int blk)
|
|
{
|
|
MSF msf;
|
|
u_int mm;
|
|
|
|
msf.c[3] = 0;
|
|
msf.c[2] = (blk + CD_MSF_OFFSET) / (CD_SECS * CD_FRAMES);
|
|
mm = (blk + CD_MSF_OFFSET) % (CD_SECS * CD_FRAMES);
|
|
msf.c[1] = mm / CD_FRAMES;
|
|
msf.c[0] = mm % CD_FRAMES;
|
|
return (msf.n);
|
|
}
|
|
/*==========================================================================*/
|
|
static INLINE u_int make16(u_char rh, u_char rl)
|
|
{
|
|
return ((rh<<8)|rl);
|
|
}
|
|
/*==========================================================================*/
|
|
static INLINE u_int make32(u_int rh, u_int rl)
|
|
{
|
|
return ((rh<<16)|rl);
|
|
}
|
|
/*==========================================================================*/
|
|
static INLINE u_char swap_nibbles(u_char i)
|
|
{
|
|
return ((i<<4)|(i>>4));
|
|
}
|
|
/*==========================================================================*/
|
|
static INLINE u_char byt2bcd(u_char i)
|
|
{
|
|
return (((i/10)<<4)+i%10);
|
|
}
|
|
/*==========================================================================*/
|
|
static INLINE u_char bcd2bin(u_char bcd)
|
|
{
|
|
return ((bcd>>4)*10+(bcd&0x0F));
|
|
}
|
|
/*==========================================================================*/
|
|
static INLINE int msf2blk(int msfx)
|
|
{
|
|
MSF msf;
|
|
int i;
|
|
|
|
msf.n=msfx;
|
|
i=(msf.c[2] * CD_SECS + msf.c[1]) * CD_FRAMES + msf.c[0] - CD_MSF_OFFSET;
|
|
if (i<0) return (0);
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
/*
|
|
* convert m-s-f_number (3 bytes only) to logical_block_address
|
|
*/
|
|
static INLINE int msf2lba(u_char *msf)
|
|
{
|
|
int i;
|
|
|
|
i=(msf[0] * CD_SECS + msf[1]) * CD_FRAMES + msf[2] - CD_MSF_OFFSET;
|
|
if (i<0) return (0);
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
/* evaluate cc_ReadError code */
|
|
static int sta2err(int sta)
|
|
{
|
|
if (famT_drive)
|
|
{
|
|
if (sta==0x00) return (0);
|
|
if (sta==0x01) return (-604); /* CRC error */
|
|
if (sta==0x02) return (-602); /* drive not ready */
|
|
if (sta==0x03) return (-607); /* unknown media */
|
|
if (sta==0x04) return (-612); /* general failure */
|
|
if (sta==0x05) return (0);
|
|
if (sta==0x06) return (-ERR_DISKCHANGE); /* disk change */
|
|
if (sta==0x0b) return (-612); /* general failure */
|
|
if (sta==0xff) return (-612); /* general failure */
|
|
return (0);
|
|
}
|
|
else
|
|
{
|
|
if (sta<=2) return (sta);
|
|
if (sta==0x05) return (-604); /* CRC error */
|
|
if (sta==0x06) return (-606); /* seek error */
|
|
if (sta==0x0d) return (-606); /* seek error */
|
|
if (sta==0x0e) return (-603); /* unknown command */
|
|
if (sta==0x14) return (-603); /* unknown command */
|
|
if (sta==0x0c) return (-611); /* read fault */
|
|
if (sta==0x0f) return (-611); /* read fault */
|
|
if (sta==0x10) return (-611); /* read fault */
|
|
if (sta>=0x16) return (-612); /* general failure */
|
|
if (sta==0x11) return (-ERR_DISKCHANGE); /* disk change (LCS: removed) */
|
|
if (famL_drive)
|
|
if (sta==0x12) return (-ERR_DISKCHANGE); /* disk change (inserted) */
|
|
return (-602); /* drive not ready */
|
|
}
|
|
}
|
|
/*==========================================================================*/
|
|
static INLINE void clr_cmdbuf(void)
|
|
{
|
|
int i;
|
|
|
|
for (i=0;i<10;i++) drvcmd[i]=0;
|
|
cmd_type=0;
|
|
}
|
|
/*==========================================================================*/
|
|
static void flush_status(void)
|
|
{
|
|
int i;
|
|
|
|
sbp_sleep(15*HZ/10);
|
|
for (i=maxtim_data;i!=0;i--) inb(CDi_status);
|
|
}
|
|
/*====================================================================*/
|
|
/*
|
|
* CDi status loop for Teac CD-55A (Rob Riggs)
|
|
*
|
|
* This is needed because for some strange reason
|
|
* the CD-55A can take a real long time to give a
|
|
* status response. This seems to happen after we
|
|
* issue a READ command where a long seek is involved.
|
|
*
|
|
* I tried to ensure that we get max throughput with
|
|
* minimal busy waiting. We busy wait at first, then
|
|
* "switch gears" and start sleeping. We sleep for
|
|
* longer periods of time the longer we wait.
|
|
*
|
|
*/
|
|
static int CDi_stat_loop_T(void)
|
|
{
|
|
int i, gear=1;
|
|
u_long timeout_1, timeout_2, timeout_3, timeout_4;
|
|
|
|
timeout_1 = jiffies + HZ / 50; /* sbp_sleep(0) for a short period */
|
|
timeout_2 = jiffies + HZ / 5; /* nap for no more than 200ms */
|
|
timeout_3 = jiffies + 5 * HZ; /* sleep for up to 5s */
|
|
timeout_4 = jiffies + 45 * HZ; /* long sleep for up to 45s. */
|
|
do
|
|
{
|
|
i = inb(CDi_status);
|
|
if (!(i&s_not_data_ready)) return (i);
|
|
if (!(i&s_not_result_ready)) return (i);
|
|
switch(gear)
|
|
{
|
|
case 4:
|
|
sbp_sleep(HZ);
|
|
if (time_after(jiffies, timeout_4)) gear++;
|
|
msg(DBG_TEA, "CDi_stat_loop_T: long sleep active.\n");
|
|
break;
|
|
case 3:
|
|
sbp_sleep(HZ/10);
|
|
if (time_after(jiffies, timeout_3)) gear++;
|
|
break;
|
|
case 2:
|
|
sbp_sleep(HZ/100);
|
|
if (time_after(jiffies, timeout_2)) gear++;
|
|
break;
|
|
case 1:
|
|
sbp_sleep(0);
|
|
if (time_after(jiffies, timeout_1)) gear++;
|
|
}
|
|
} while (gear < 5);
|
|
return -1;
|
|
}
|
|
/*==========================================================================*/
|
|
static int CDi_stat_loop(void)
|
|
{
|
|
int i,j;
|
|
|
|
for(timeout = jiffies + 10*HZ, i=maxtim_data; time_before(jiffies, timeout); )
|
|
{
|
|
for ( ;i!=0;i--)
|
|
{
|
|
j=inb(CDi_status);
|
|
if (!(j&s_not_data_ready)) return (j);
|
|
if (!(j&s_not_result_ready)) return (j);
|
|
if (fam0L_drive) if (j&s_attention) return (j);
|
|
}
|
|
sbp_sleep(1);
|
|
i = 1;
|
|
}
|
|
msg(DBG_LCS,"CDi_stat_loop failed in line %d\n", __LINE__);
|
|
return (-1);
|
|
}
|
|
/*==========================================================================*/
|
|
#if 00000
|
|
/*==========================================================================*/
|
|
static int tst_DataReady(void)
|
|
{
|
|
int i;
|
|
|
|
i=inb(CDi_status);
|
|
if (i&s_not_data_ready) return (0);
|
|
return (1);
|
|
}
|
|
/*==========================================================================*/
|
|
static int tst_ResultReady(void)
|
|
{
|
|
int i;
|
|
|
|
i=inb(CDi_status);
|
|
if (i&s_not_result_ready) return (0);
|
|
return (1);
|
|
}
|
|
/*==========================================================================*/
|
|
static int tst_Attention(void)
|
|
{
|
|
int i;
|
|
|
|
i=inb(CDi_status);
|
|
if (i&s_attention) return (1);
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
#endif
|
|
/*==========================================================================*/
|
|
static int ResponseInfo(void)
|
|
{
|
|
int i,j,st=0;
|
|
u_long timeout;
|
|
|
|
for (i=0,timeout=jiffies+HZ;i<response_count;i++)
|
|
{
|
|
for (j=maxtim_data; ; )
|
|
{
|
|
for ( ;j!=0;j-- )
|
|
{
|
|
st=inb(CDi_status);
|
|
if (!(st&s_not_result_ready)) break;
|
|
}
|
|
if ((j!=0)||time_after_eq(jiffies, timeout)) break;
|
|
sbp_sleep(1);
|
|
j = 1;
|
|
}
|
|
if (time_after_eq(jiffies, timeout)) break;
|
|
infobuf[i]=inb(CDi_info);
|
|
}
|
|
#if 000
|
|
while (!(inb(CDi_status)&s_not_result_ready))
|
|
{
|
|
infobuf[i++]=inb(CDi_info);
|
|
}
|
|
j=i-response_count;
|
|
if (j>0) msg(DBG_INF,"ResponseInfo: got %d trailing bytes.\n",j);
|
|
#endif /* 000 */
|
|
for (j=0;j<i;j++)
|
|
sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
|
|
msgbuf[j*3]=0;
|
|
msg(DBG_CMD,"ResponseInfo:%s (%d,%d)\n",msgbuf,response_count,i);
|
|
j=response_count-i;
|
|
if (j>0) return (-j);
|
|
else return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static void EvaluateStatus(int st)
|
|
{
|
|
current_drive->status_bits=0;
|
|
if (fam1_drive) current_drive->status_bits=st|p_success;
|
|
else if (fam0_drive)
|
|
{
|
|
if (st&p_caddin_old) current_drive->status_bits |= p_door_closed|p_caddy_in;
|
|
if (st&p_spinning) current_drive->status_bits |= p_spinning;
|
|
if (st&p_check) current_drive->status_bits |= p_check;
|
|
if (st&p_success_old) current_drive->status_bits |= p_success;
|
|
if (st&p_busy_old) current_drive->status_bits |= p_busy_new;
|
|
if (st&p_disk_ok) current_drive->status_bits |= p_disk_ok;
|
|
}
|
|
else if (famLV_drive)
|
|
{
|
|
current_drive->status_bits |= p_success;
|
|
if (st&p_caddin_old) current_drive->status_bits |= p_disk_ok|p_caddy_in;
|
|
if (st&p_spinning) current_drive->status_bits |= p_spinning;
|
|
if (st&p_check) current_drive->status_bits |= p_check;
|
|
if (st&p_busy_old) current_drive->status_bits |= p_busy_new;
|
|
if (st&p_lcs_door_closed) current_drive->status_bits |= p_door_closed;
|
|
if (st&p_lcs_door_locked) current_drive->status_bits |= p_door_locked;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
current_drive->status_bits |= p_success;
|
|
if (st&p2_check) current_drive->status_bits |= p1_check;
|
|
if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed;
|
|
if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in;
|
|
if (st&p2_busy1) current_drive->status_bits |= p1_busy;
|
|
if (st&p2_busy2) current_drive->status_bits |= p1_busy;
|
|
if (st&p2_spinning) current_drive->status_bits |= p1_spinning;
|
|
if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked;
|
|
if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
return; /* still needs to get coded */
|
|
current_drive->status_bits |= p_success;
|
|
if (st&p2_check) current_drive->status_bits |= p1_check;
|
|
if (st&p2_door_closed) current_drive->status_bits |= p1_door_closed;
|
|
if (st&p2_disk_in) current_drive->status_bits |= p1_disk_in;
|
|
if (st&p2_busy1) current_drive->status_bits |= p1_busy;
|
|
if (st&p2_busy2) current_drive->status_bits |= p1_busy;
|
|
if (st&p2_spinning) current_drive->status_bits |= p1_spinning;
|
|
if (st&p2_door_locked) current_drive->status_bits |= p1_door_locked;
|
|
if (st&p2_disk_ok) current_drive->status_bits |= p1_disk_ok;
|
|
}
|
|
return;
|
|
}
|
|
/*==========================================================================*/
|
|
static int cmd_out_T(void);
|
|
|
|
static int get_state_T(void)
|
|
{
|
|
int i;
|
|
|
|
clr_cmdbuf();
|
|
current_drive->n_bytes=1;
|
|
drvcmd[0]=CMDT_STATUS;
|
|
i=cmd_out_T();
|
|
if (i>=0) i=infobuf[0];
|
|
else
|
|
{
|
|
msg(DBG_TEA,"get_state_T error %d\n", i);
|
|
return (i);
|
|
}
|
|
if (i>=0)
|
|
/* 2: closed, disk in */
|
|
current_drive->status_bits=p1_door_closed|p1_disk_in|p1_spinning|p1_disk_ok;
|
|
else if (current_drive->error_state==6)
|
|
{
|
|
/* 3: closed, disk in, changed ("06 xx xx") */
|
|
current_drive->status_bits=p1_door_closed|p1_disk_in;
|
|
current_drive->CD_changed=0xFF;
|
|
current_drive->diskstate_flags &= ~toc_bit;
|
|
}
|
|
else if ((current_drive->error_state!=2)||(current_drive->b3!=0x3A)||(current_drive->b4==0x00))
|
|
{
|
|
/* 1: closed, no disk ("xx yy zz"or "02 3A 00") */
|
|
current_drive->status_bits=p1_door_closed;
|
|
current_drive->open_count=0;
|
|
}
|
|
else if (current_drive->b4==0x01)
|
|
{
|
|
/* 0: open ("02 3A 01") */
|
|
current_drive->status_bits=0;
|
|
current_drive->open_count=0;
|
|
}
|
|
else
|
|
{
|
|
/* 1: closed, no disk ("02 3A xx") */
|
|
current_drive->status_bits=p1_door_closed;
|
|
current_drive->open_count=0;
|
|
}
|
|
return (current_drive->status_bits);
|
|
}
|
|
/*==========================================================================*/
|
|
static int ResponseStatus(void)
|
|
{
|
|
int i,j;
|
|
u_long timeout;
|
|
|
|
msg(DBG_STA,"doing ResponseStatus...\n");
|
|
if (famT_drive) return (get_state_T());
|
|
if (flags_cmd_out & f_respo3) timeout = jiffies;
|
|
else if (flags_cmd_out & f_respo2) timeout = jiffies + 16*HZ;
|
|
else timeout = jiffies + 4*HZ;
|
|
j=maxtim_8;
|
|
do
|
|
{
|
|
for ( ;j!=0;j--)
|
|
{
|
|
i=inb(CDi_status);
|
|
if (!(i&s_not_result_ready)) break;
|
|
}
|
|
if ((j!=0)||time_after(jiffies, timeout)) break;
|
|
sbp_sleep(1);
|
|
j = 1;
|
|
}
|
|
while (1);
|
|
if (j==0)
|
|
{
|
|
if ((flags_cmd_out & f_respo3) == 0)
|
|
msg(DBG_STA,"ResponseStatus: timeout.\n");
|
|
current_drive->status_bits=0;
|
|
return (-401);
|
|
}
|
|
i=inb(CDi_info);
|
|
msg(DBG_STA,"ResponseStatus: response %02X.\n", i);
|
|
EvaluateStatus(i);
|
|
msg(DBG_STA,"status_bits=%02X, i=%02X\n",current_drive->status_bits,i);
|
|
return (current_drive->status_bits);
|
|
}
|
|
/*==========================================================================*/
|
|
static void cc_ReadStatus(void)
|
|
{
|
|
int i;
|
|
|
|
msg(DBG_STA,"giving cc_ReadStatus command\n");
|
|
if (famT_drive) return;
|
|
SBPCD_CLI;
|
|
if (fam0LV_drive) OUT(CDo_command,CMD0_STATUS);
|
|
else if (fam1_drive) OUT(CDo_command,CMD1_STATUS);
|
|
else if (fam2_drive) OUT(CDo_command,CMD2_STATUS);
|
|
if (!fam0LV_drive) for (i=0;i<6;i++) OUT(CDo_command,0);
|
|
SBPCD_STI;
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_ReadError(void)
|
|
{
|
|
int i;
|
|
|
|
clr_cmdbuf();
|
|
msg(DBG_ERR,"giving cc_ReadError command.\n");
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_READ_ERR;
|
|
response_count=8;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus;
|
|
}
|
|
else if (fam0LV_drive)
|
|
{
|
|
drvcmd[0]=CMD0_READ_ERR;
|
|
response_count=6;
|
|
if (famLV_drive)
|
|
flags_cmd_out=f_putcmd;
|
|
else
|
|
flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_READ_ERR;
|
|
response_count=6;
|
|
flags_cmd_out=f_putcmd;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
response_count=5;
|
|
drvcmd[0]=CMDT_READ_ERR;
|
|
}
|
|
i=cmd_out();
|
|
current_drive->error_byte=0;
|
|
msg(DBG_ERR,"cc_ReadError: cmd_out(CMDx_READ_ERR) returns %d (%02X)\n",i,i);
|
|
if (i<0) return (i);
|
|
if (fam0V_drive) i=1;
|
|
else i=2;
|
|
current_drive->error_byte=infobuf[i];
|
|
msg(DBG_ERR,"cc_ReadError: infobuf[%d] is %d (%02X)\n",i,current_drive->error_byte,current_drive->error_byte);
|
|
i=sta2err(infobuf[i]);
|
|
if (i==-ERR_DISKCHANGE)
|
|
{
|
|
current_drive->CD_changed=0xFF;
|
|
current_drive->diskstate_flags &= ~toc_bit;
|
|
}
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_DriveReset(void);
|
|
|
|
static int cmd_out_T(void)
|
|
{
|
|
#undef CMDT_TRIES
|
|
#define CMDT_TRIES 1000
|
|
#define TEST_FALSE_FF 1
|
|
|
|
int i, j, l=0, m, ntries;
|
|
unsigned long flags;
|
|
|
|
current_drive->error_state=0;
|
|
current_drive->b3=0;
|
|
current_drive->b4=0;
|
|
current_drive->f_drv_error=0;
|
|
for (i=0;i<10;i++) sprintf(&msgbuf[i*3]," %02X",drvcmd[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_CMD,"cmd_out_T:%s\n",msgbuf);
|
|
|
|
OUT(CDo_sel_i_d,0);
|
|
OUT(CDo_enable,current_drive->drv_sel);
|
|
i=inb(CDi_status);
|
|
do_16bit=0;
|
|
if ((f_16bit)&&(!(i&0x80)))
|
|
{
|
|
do_16bit=1;
|
|
msg(DBG_TEA,"cmd_out_T: do_16bit set.\n");
|
|
}
|
|
if (!(i&s_not_result_ready))
|
|
do
|
|
{
|
|
j=inb(CDi_info);
|
|
i=inb(CDi_status);
|
|
sbp_sleep(0);
|
|
msg(DBG_TEA,"cmd_out_T: spurious !s_not_result_ready. (%02X)\n", j);
|
|
}
|
|
while (!(i&s_not_result_ready));
|
|
save_flags(flags); cli();
|
|
for (i=0;i<10;i++) OUT(CDo_command,drvcmd[i]);
|
|
restore_flags(flags);
|
|
for (ntries=CMDT_TRIES;ntries>0;ntries--)
|
|
{
|
|
if (drvcmd[0]==CMDT_READ_VER) sbp_sleep(HZ); /* fixme */
|
|
#if 01
|
|
OUT(CDo_sel_i_d,1);
|
|
#endif /* 01 */
|
|
if (teac==2)
|
|
{
|
|
if ((i=CDi_stat_loop_T()) == -1) break;
|
|
}
|
|
else
|
|
{
|
|
#if 0
|
|
OUT(CDo_sel_i_d,1);
|
|
#endif /* 0 */
|
|
i=inb(CDi_status);
|
|
}
|
|
if (!(i&s_not_data_ready)) /* f.e. CMDT_DISKINFO */
|
|
{
|
|
OUT(CDo_sel_i_d,1);
|
|
if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
|
|
if (drvcmd[0]==CMDT_DISKINFO)
|
|
{
|
|
l=0;
|
|
do
|
|
{
|
|
if (do_16bit)
|
|
{
|
|
i=inw(CDi_data);
|
|
infobuf[l++]=i&0x0ff;
|
|
infobuf[l++]=i>>8;
|
|
#if TEST_FALSE_FF
|
|
if ((l==2)&&(infobuf[0]==0x0ff))
|
|
{
|
|
infobuf[0]=infobuf[1];
|
|
l=1;
|
|
msg(DBG_TEA,"cmd_out_T: do_16bit: false first byte!\n");
|
|
}
|
|
#endif /* TEST_FALSE_FF */
|
|
}
|
|
else infobuf[l++]=inb(CDi_data);
|
|
i=inb(CDi_status);
|
|
}
|
|
while (!(i&s_not_data_ready));
|
|
for (j=0;j<l;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
|
|
msgbuf[j*3]=0;
|
|
msg(DBG_CMD,"cmd_out_T data response:%s\n", msgbuf);
|
|
}
|
|
else
|
|
{
|
|
msg(DBG_TEA,"cmd_out_T: data response with cmd_%02X!\n",
|
|
drvcmd[0]);
|
|
j=0;
|
|
do
|
|
{
|
|
if (do_16bit) i=inw(CDi_data);
|
|
else i=inb(CDi_data);
|
|
j++;
|
|
i=inb(CDi_status);
|
|
}
|
|
while (!(i&s_not_data_ready));
|
|
msg(DBG_TEA,"cmd_out_T: data response: discarded %d bytes/words.\n", j);
|
|
fatal_err++;
|
|
}
|
|
}
|
|
i=inb(CDi_status);
|
|
if (!(i&s_not_result_ready))
|
|
{
|
|
OUT(CDo_sel_i_d,0);
|
|
if (drvcmd[0]==CMDT_DISKINFO) m=l;
|
|
else m=0;
|
|
do
|
|
{
|
|
infobuf[m++]=inb(CDi_info);
|
|
i=inb(CDi_status);
|
|
}
|
|
while (!(i&s_not_result_ready));
|
|
for (j=0;j<m;j++) sprintf(&msgbuf[j*3]," %02X",infobuf[j]);
|
|
msgbuf[j*3]=0;
|
|
msg(DBG_CMD,"cmd_out_T info response:%s\n", msgbuf);
|
|
if (drvcmd[0]==CMDT_DISKINFO)
|
|
{
|
|
infobuf[0]=infobuf[l];
|
|
if (infobuf[0]!=0x02) return (l); /* data length */
|
|
}
|
|
else if (infobuf[0]!=0x02) return (m); /* info length */
|
|
do
|
|
{
|
|
++recursion;
|
|
if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (%02X): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n", drvcmd[0], recursion);
|
|
clr_cmdbuf();
|
|
drvcmd[0]=CMDT_READ_ERR;
|
|
j=cmd_out_T(); /* !!! recursive here !!! */
|
|
--recursion;
|
|
sbp_sleep(1);
|
|
}
|
|
while (j<0);
|
|
current_drive->error_state=infobuf[2];
|
|
current_drive->b3=infobuf[3];
|
|
current_drive->b4=infobuf[4];
|
|
if (current_drive->f_drv_error)
|
|
{
|
|
current_drive->f_drv_error=0;
|
|
cc_DriveReset();
|
|
current_drive->error_state=2;
|
|
}
|
|
return (-current_drive->error_state-400);
|
|
}
|
|
if (drvcmd[0]==CMDT_READ) return (0); /* handled elsewhere */
|
|
if ((teac==0)||(ntries<(CMDT_TRIES-5))) sbp_sleep(HZ/10);
|
|
else sbp_sleep(HZ/100);
|
|
if (ntries>(CMDT_TRIES-50)) continue;
|
|
msg(DBG_TEA,"cmd_out_T: next CMDT_TRIES (%02X): %d.\n", drvcmd[0], ntries-1);
|
|
}
|
|
current_drive->f_drv_error=1;
|
|
cc_DriveReset();
|
|
current_drive->error_state=2;
|
|
return (-99);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cmd_out(void)
|
|
{
|
|
int i=0;
|
|
|
|
if (famT_drive) return(cmd_out_T());
|
|
|
|
if (flags_cmd_out&f_putcmd)
|
|
{
|
|
unsigned long flags;
|
|
for (i=0;i<7;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", drvcmd[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_CMD,"cmd_out:%s\n", msgbuf);
|
|
save_flags(flags); cli();
|
|
for (i=0;i<7;i++) OUT(CDo_command,drvcmd[i]);
|
|
restore_flags(flags);
|
|
}
|
|
if (response_count!=0)
|
|
{
|
|
if (cmd_type!=0)
|
|
{
|
|
if (sbpro_type==1) OUT(CDo_sel_i_d,1);
|
|
msg(DBG_INF,"misleaded to try ResponseData.\n");
|
|
if (sbpro_type==1) OUT(CDo_sel_i_d,0);
|
|
return (-22);
|
|
}
|
|
else i=ResponseInfo();
|
|
if (i<0) return (i);
|
|
}
|
|
if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to CDi_stat_loop.\n");
|
|
if (flags_cmd_out&f_lopsta)
|
|
{
|
|
i=CDi_stat_loop();
|
|
if ((i<0)||!(i&s_attention)) return (-8);
|
|
}
|
|
if (!(flags_cmd_out&f_getsta)) goto LOC_229;
|
|
|
|
LOC_228:
|
|
if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadStatus.\n");
|
|
cc_ReadStatus();
|
|
|
|
LOC_229:
|
|
if (flags_cmd_out&f_ResponseStatus)
|
|
{
|
|
if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to ResponseStatus.\n");
|
|
i=ResponseStatus();
|
|
/* builds status_bits, returns orig. status or p_busy_new */
|
|
if (i<0) return (i);
|
|
if (flags_cmd_out&(f_bit1|f_wait_if_busy))
|
|
{
|
|
if (!st_check)
|
|
{
|
|
if ((flags_cmd_out&f_bit1)&&(i&p_success)) goto LOC_232;
|
|
if ((!(flags_cmd_out&f_wait_if_busy))||(!st_busy)) goto LOC_228;
|
|
}
|
|
}
|
|
}
|
|
LOC_232:
|
|
if (!(flags_cmd_out&f_obey_p_check)) return (0);
|
|
if (!st_check) return (0);
|
|
if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cc_ReadError.\n");
|
|
i=cc_ReadError();
|
|
if (current_drive->in_SpinUp) msg(DBG_SPI,"in_SpinUp: to cmd_out OK.\n");
|
|
msg(DBG_000,"cmd_out: cc_ReadError=%d\n", i);
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_Seek(u_int pos, char f_blk_msf)
|
|
{
|
|
int i;
|
|
|
|
clr_cmdbuf();
|
|
if (f_blk_msf>1) return (-3);
|
|
if (fam0V_drive)
|
|
{
|
|
drvcmd[0]=CMD0_SEEK;
|
|
if (f_blk_msf==1) pos=msf2blk(pos);
|
|
drvcmd[2]=(pos>>16)&0x00FF;
|
|
drvcmd[3]=(pos>>8)&0x00FF;
|
|
drvcmd[4]=pos&0x00FF;
|
|
if (fam0_drive)
|
|
flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
|
|
f_ResponseStatus | f_obey_p_check | f_bit1;
|
|
else
|
|
flags_cmd_out = f_putcmd;
|
|
}
|
|
else if (fam1L_drive)
|
|
{
|
|
drvcmd[0]=CMD1_SEEK; /* same as CMD1_ and CMDL_ */
|
|
if (f_blk_msf==0) pos=blk2msf(pos);
|
|
drvcmd[1]=(pos>>16)&0x00FF;
|
|
drvcmd[2]=(pos>>8)&0x00FF;
|
|
drvcmd[3]=pos&0x00FF;
|
|
if (famL_drive)
|
|
flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
|
|
else
|
|
flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_SEEK;
|
|
if (f_blk_msf==0) pos=blk2msf(pos);
|
|
drvcmd[2]=(pos>>24)&0x00FF;
|
|
drvcmd[3]=(pos>>16)&0x00FF;
|
|
drvcmd[4]=(pos>>8)&0x00FF;
|
|
drvcmd[5]=pos&0x00FF;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
drvcmd[0]=CMDT_SEEK;
|
|
if (f_blk_msf==1) pos=msf2blk(pos);
|
|
drvcmd[2]=(pos>>24)&0x00FF;
|
|
drvcmd[3]=(pos>>16)&0x00FF;
|
|
drvcmd[4]=(pos>>8)&0x00FF;
|
|
drvcmd[5]=pos&0x00FF;
|
|
current_drive->n_bytes=1;
|
|
}
|
|
response_count=0;
|
|
i=cmd_out();
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_SpinUp(void)
|
|
{
|
|
int i;
|
|
|
|
msg(DBG_SPI,"SpinUp.\n");
|
|
current_drive->in_SpinUp = 1;
|
|
clr_cmdbuf();
|
|
if (fam0LV_drive)
|
|
{
|
|
drvcmd[0]=CMD0_SPINUP;
|
|
if (fam0L_drive)
|
|
flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
|
|
f_ResponseStatus|f_obey_p_check|f_bit1;
|
|
else
|
|
flags_cmd_out=f_putcmd;
|
|
}
|
|
else if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_SPINUP;
|
|
flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_TRAY_CTL;
|
|
drvcmd[4]=0x01; /* "spinup" */
|
|
flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
drvcmd[0]=CMDT_TRAY_CTL;
|
|
drvcmd[4]=0x03; /* "insert", it hopefully spins the drive up */
|
|
}
|
|
response_count=0;
|
|
i=cmd_out();
|
|
current_drive->in_SpinUp = 0;
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_SpinDown(void)
|
|
{
|
|
int i;
|
|
|
|
if (fam0_drive) return (0);
|
|
clr_cmdbuf();
|
|
response_count=0;
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_SPINDOWN;
|
|
flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_TRAY_CTL;
|
|
drvcmd[4]=0x02; /* "eject" */
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus;
|
|
}
|
|
else if (famL_drive)
|
|
{
|
|
drvcmd[0]=CMDL_SPINDOWN;
|
|
drvcmd[1]=1;
|
|
flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
|
|
}
|
|
else if (famV_drive)
|
|
{
|
|
drvcmd[0]=CMDV_SPINDOWN;
|
|
flags_cmd_out=f_putcmd;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
drvcmd[0]=CMDT_TRAY_CTL;
|
|
drvcmd[4]=0x02; /* "eject" */
|
|
}
|
|
i=cmd_out();
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_get_mode_T(void)
|
|
{
|
|
int i;
|
|
|
|
clr_cmdbuf();
|
|
response_count=10;
|
|
drvcmd[0]=CMDT_GETMODE;
|
|
drvcmd[4]=response_count;
|
|
i=cmd_out_T();
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_set_mode_T(void)
|
|
{
|
|
int i;
|
|
|
|
clr_cmdbuf();
|
|
response_count=1;
|
|
drvcmd[0]=CMDT_SETMODE;
|
|
drvcmd[1]=current_drive->speed_byte;
|
|
drvcmd[2]=current_drive->frmsiz>>8;
|
|
drvcmd[3]=current_drive->frmsiz&0x0FF;
|
|
drvcmd[4]=current_drive->f_XA; /* 1: XA */
|
|
drvcmd[5]=current_drive->type_byte; /* 0, 1, 3 */
|
|
drvcmd[6]=current_drive->mode_xb_6;
|
|
drvcmd[7]=current_drive->mode_yb_7|current_drive->volume_control;
|
|
drvcmd[8]=current_drive->mode_xb_8;
|
|
drvcmd[9]=current_drive->delay;
|
|
i=cmd_out_T();
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_prep_mode_T(void)
|
|
{
|
|
int i, j;
|
|
|
|
i=cc_get_mode_T();
|
|
if (i<0) return (i);
|
|
for (i=0;i<10;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
|
|
current_drive->speed_byte=0x02; /* 0x02: auto quad, 0x82: quad, 0x81: double, 0x80: single */
|
|
current_drive->frmsiz=make16(infobuf[2],infobuf[3]);
|
|
current_drive->f_XA=infobuf[4];
|
|
if (current_drive->f_XA==0) current_drive->type_byte=0;
|
|
else current_drive->type_byte=1;
|
|
current_drive->mode_xb_6=infobuf[6];
|
|
current_drive->mode_yb_7=1;
|
|
current_drive->mode_xb_8=infobuf[8];
|
|
current_drive->delay=0; /* 0, 1, 2, 3 */
|
|
j=cc_set_mode_T();
|
|
i=cc_get_mode_T();
|
|
for (i=0;i<10;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_TEA,"CMDT_GETMODE:%s\n", msgbuf);
|
|
return (j);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_SetSpeed(u_char speed, u_char x1, u_char x2)
|
|
{
|
|
int i;
|
|
|
|
if (fam0LV_drive) return (0);
|
|
clr_cmdbuf();
|
|
response_count=0;
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_SETMODE;
|
|
drvcmd[1]=0x03;
|
|
drvcmd[2]=speed;
|
|
drvcmd[3]=x1;
|
|
drvcmd[4]=x2;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_SETSPEED;
|
|
if (speed&speed_auto)
|
|
{
|
|
drvcmd[2]=0xFF;
|
|
drvcmd[3]=0xFF;
|
|
}
|
|
else
|
|
{
|
|
drvcmd[2]=0;
|
|
drvcmd[3]=150;
|
|
}
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
return (0);
|
|
}
|
|
i=cmd_out();
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_SetVolume(void)
|
|
{
|
|
int i;
|
|
u_char channel0,channel1,volume0,volume1;
|
|
u_char control0,value0,control1,value1;
|
|
|
|
current_drive->diskstate_flags &= ~volume_bit;
|
|
clr_cmdbuf();
|
|
channel0=current_drive->vol_chan0;
|
|
volume0=current_drive->vol_ctrl0;
|
|
channel1=control1=current_drive->vol_chan1;
|
|
volume1=value1=current_drive->vol_ctrl1;
|
|
control0=value0=0;
|
|
|
|
if (famV_drive) return (0);
|
|
|
|
if (((current_drive->drv_options&audio_mono)!=0)&&(current_drive->drv_type>=drv_211))
|
|
{
|
|
if ((volume0!=0)&&(volume1==0))
|
|
{
|
|
volume1=volume0;
|
|
channel1=channel0;
|
|
}
|
|
else if ((volume0==0)&&(volume1!=0))
|
|
{
|
|
volume0=volume1;
|
|
channel0=channel1;
|
|
}
|
|
}
|
|
if (channel0>1)
|
|
{
|
|
channel0=0;
|
|
volume0=0;
|
|
}
|
|
if (channel1>1)
|
|
{
|
|
channel1=1;
|
|
volume1=0;
|
|
}
|
|
|
|
if (fam1_drive)
|
|
{
|
|
control0=channel0+1;
|
|
control1=channel1+1;
|
|
value0=(volume0>volume1)?volume0:volume1;
|
|
value1=value0;
|
|
if (volume0==0) control0=0;
|
|
if (volume1==0) control1=0;
|
|
drvcmd[0]=CMD1_SETMODE;
|
|
drvcmd[1]=0x05;
|
|
drvcmd[3]=control0;
|
|
drvcmd[4]=value0;
|
|
drvcmd[5]=control1;
|
|
drvcmd[6]=value1;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
control0=channel0+1;
|
|
control1=channel1+1;
|
|
value0=(volume0>volume1)?volume0:volume1;
|
|
value1=value0;
|
|
if (volume0==0) control0=0;
|
|
if (volume1==0) control1=0;
|
|
drvcmd[0]=CMD2_SETMODE;
|
|
drvcmd[1]=0x0E;
|
|
drvcmd[3]=control0;
|
|
drvcmd[4]=value0;
|
|
drvcmd[5]=control1;
|
|
drvcmd[6]=value1;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus;
|
|
}
|
|
else if (famL_drive)
|
|
{
|
|
if ((volume0==0)||(channel0!=0)) control0 |= 0x80;
|
|
if ((volume1==0)||(channel1!=1)) control0 |= 0x40;
|
|
if (volume0|volume1) value0=0x80;
|
|
drvcmd[0]=CMDL_SETMODE;
|
|
drvcmd[1]=0x03;
|
|
drvcmd[4]=control0;
|
|
drvcmd[5]=value0;
|
|
flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
|
|
}
|
|
else if (fam0_drive) /* different firmware levels */
|
|
{
|
|
if (current_drive->drv_type>=drv_300)
|
|
{
|
|
control0=volume0&0xFC;
|
|
value0=volume1&0xFC;
|
|
if ((volume0!=0)&&(volume0<4)) control0 |= 0x04;
|
|
if ((volume1!=0)&&(volume1<4)) value0 |= 0x04;
|
|
if (channel0!=0) control0 |= 0x01;
|
|
if (channel1==1) value0 |= 0x01;
|
|
}
|
|
else
|
|
{
|
|
value0=(volume0>volume1)?volume0:volume1;
|
|
if (current_drive->drv_type<drv_211)
|
|
{
|
|
if (channel0!=0)
|
|
{
|
|
i=channel1;
|
|
channel1=channel0;
|
|
channel0=i;
|
|
i=volume1;
|
|
volume1=volume0;
|
|
volume0=i;
|
|
}
|
|
if (channel0==channel1)
|
|
{
|
|
if (channel0==0)
|
|
{
|
|
channel1=1;
|
|
volume1=0;
|
|
volume0=value0;
|
|
}
|
|
else
|
|
{
|
|
channel0=0;
|
|
volume0=0;
|
|
volume1=value0;
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((volume0!=0)&&(volume1!=0))
|
|
{
|
|
if (volume0==0xFF) volume1=0xFF;
|
|
else if (volume1==0xFF) volume0=0xFF;
|
|
}
|
|
else if (current_drive->drv_type<drv_201) volume0=volume1=value0;
|
|
|
|
if (current_drive->drv_type>=drv_201)
|
|
{
|
|
if (volume0==0) control0 |= 0x80;
|
|
if (volume1==0) control0 |= 0x40;
|
|
}
|
|
if (current_drive->drv_type>=drv_211)
|
|
{
|
|
if (channel0!=0) control0 |= 0x20;
|
|
if (channel1!=1) control0 |= 0x10;
|
|
}
|
|
}
|
|
drvcmd[0]=CMD0_SETMODE;
|
|
drvcmd[1]=0x83;
|
|
drvcmd[4]=control0;
|
|
drvcmd[5]=value0;
|
|
flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
current_drive->volume_control=0;
|
|
if (!volume0) current_drive->volume_control|=0x10;
|
|
if (!volume1) current_drive->volume_control|=0x20;
|
|
i=cc_prep_mode_T();
|
|
if (i<0) return (i);
|
|
}
|
|
if (!famT_drive)
|
|
{
|
|
response_count=0;
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
}
|
|
current_drive->diskstate_flags |= volume_bit;
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int GetStatus(void)
|
|
{
|
|
int i;
|
|
|
|
if (famT_drive) return (0);
|
|
flags_cmd_out=f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
response_count=0;
|
|
cmd_type=0;
|
|
i=cmd_out();
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_DriveReset(void)
|
|
{
|
|
int i;
|
|
|
|
msg(DBG_RES,"cc_DriveReset called.\n");
|
|
clr_cmdbuf();
|
|
response_count=0;
|
|
if (fam0LV_drive) OUT(CDo_reset,0x00);
|
|
else if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_RESET;
|
|
flags_cmd_out=f_putcmd;
|
|
i=cmd_out();
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_RESET;
|
|
flags_cmd_out=f_putcmd;
|
|
i=cmd_out();
|
|
OUT(CDo_reset,0x00);
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
OUT(CDo_sel_i_d,0);
|
|
OUT(CDo_enable,current_drive->drv_sel);
|
|
OUT(CDo_command,CMDT_RESET);
|
|
for (i=1;i<10;i++) OUT(CDo_command,0);
|
|
}
|
|
if (fam0LV_drive) sbp_sleep(5*HZ); /* wait 5 seconds */
|
|
else sbp_sleep(1*HZ); /* wait a second */
|
|
#if 1
|
|
if (famT_drive)
|
|
{
|
|
msg(DBG_TEA, "================CMDT_RESET given=================.\n");
|
|
sbp_sleep(3*HZ);
|
|
}
|
|
#endif /* 1 */
|
|
flush_status();
|
|
i=GetStatus();
|
|
if (i<0) return i;
|
|
if (!famT_drive)
|
|
if (current_drive->error_byte!=aud_12) return -501;
|
|
return (0);
|
|
}
|
|
|
|
/*==========================================================================*/
|
|
static int SetSpeed(void)
|
|
{
|
|
int i, speed;
|
|
|
|
if (!(current_drive->drv_options&(speed_auto|speed_300|speed_150))) return (0);
|
|
speed=speed_auto;
|
|
if (!(current_drive->drv_options&speed_auto))
|
|
{
|
|
speed |= speed_300;
|
|
if (!(current_drive->drv_options&speed_300)) speed=0;
|
|
}
|
|
i=cc_SetSpeed(speed,0,0);
|
|
return (i);
|
|
}
|
|
|
|
static void switch_drive(struct sbpcd_drive *);
|
|
|
|
static int sbpcd_select_speed(struct cdrom_device_info *cdi, int speed)
|
|
{
|
|
struct sbpcd_drive *p = cdi->handle;
|
|
if (p != current_drive)
|
|
switch_drive(p);
|
|
|
|
return cc_SetSpeed(speed == 2 ? speed_300 : speed_150, 0, 0);
|
|
}
|
|
|
|
/*==========================================================================*/
|
|
static int DriveReset(void)
|
|
{
|
|
int i;
|
|
|
|
i=cc_DriveReset();
|
|
if (i<0) return (-22);
|
|
do
|
|
{
|
|
i=GetStatus();
|
|
if ((i<0)&&(i!=-ERR_DISKCHANGE)) {
|
|
return (-2); /* from sta2err */
|
|
}
|
|
if (!st_caddy_in) break;
|
|
sbp_sleep(1);
|
|
}
|
|
while (!st_diskok);
|
|
#if 000
|
|
current_drive->CD_changed=1;
|
|
#endif
|
|
if ((st_door_closed) && (st_caddy_in))
|
|
{
|
|
i=DiskInfo();
|
|
if (i<0) return (-23);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int sbpcd_reset(struct cdrom_device_info *cdi)
|
|
{
|
|
struct sbpcd_drive *p = cdi->handle;
|
|
if (p != current_drive)
|
|
switch_drive(p);
|
|
return DriveReset();
|
|
}
|
|
|
|
/*==========================================================================*/
|
|
static int cc_PlayAudio(int pos_audio_start,int pos_audio_end)
|
|
{
|
|
int i, j, n;
|
|
|
|
if (current_drive->audio_state==audio_playing) return (-EINVAL);
|
|
clr_cmdbuf();
|
|
response_count=0;
|
|
if (famLV_drive)
|
|
{
|
|
drvcmd[0]=CMDL_PLAY;
|
|
i=msf2blk(pos_audio_start);
|
|
n=msf2blk(pos_audio_end)+1-i;
|
|
drvcmd[1]=(i>>16)&0x00FF;
|
|
drvcmd[2]=(i>>8)&0x00FF;
|
|
drvcmd[3]=i&0x00FF;
|
|
drvcmd[4]=(n>>16)&0x00FF;
|
|
drvcmd[5]=(n>>8)&0x00FF;
|
|
drvcmd[6]=n&0x00FF;
|
|
if (famL_drive)
|
|
flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
|
|
f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
|
|
else
|
|
flags_cmd_out = f_putcmd;
|
|
}
|
|
else
|
|
{
|
|
j=1;
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_PLAY_MSF;
|
|
flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus |
|
|
f_obey_p_check | f_wait_if_busy;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_PLAY_MSF;
|
|
flags_cmd_out = f_putcmd | f_ResponseStatus | f_obey_p_check;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
drvcmd[0]=CMDT_PLAY_MSF;
|
|
j=3;
|
|
response_count=1;
|
|
}
|
|
else if (fam0_drive)
|
|
{
|
|
drvcmd[0]=CMD0_PLAY_MSF;
|
|
flags_cmd_out = f_putcmd | f_respo2 | f_lopsta | f_getsta |
|
|
f_ResponseStatus | f_obey_p_check | f_wait_if_busy;
|
|
}
|
|
drvcmd[j]=(pos_audio_start>>16)&0x00FF;
|
|
drvcmd[j+1]=(pos_audio_start>>8)&0x00FF;
|
|
drvcmd[j+2]=pos_audio_start&0x00FF;
|
|
drvcmd[j+3]=(pos_audio_end>>16)&0x00FF;
|
|
drvcmd[j+4]=(pos_audio_end>>8)&0x00FF;
|
|
drvcmd[j+5]=pos_audio_end&0x00FF;
|
|
}
|
|
i=cmd_out();
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_Pause_Resume(int pau_res)
|
|
{
|
|
int i;
|
|
|
|
clr_cmdbuf();
|
|
response_count=0;
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_PAU_RES;
|
|
if (pau_res!=1) drvcmd[1]=0x80;
|
|
flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_PAU_RES;
|
|
if (pau_res!=1) drvcmd[2]=0x01;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus;
|
|
}
|
|
else if (fam0LV_drive)
|
|
{
|
|
drvcmd[0]=CMD0_PAU_RES;
|
|
if (pau_res!=1) drvcmd[1]=0x80;
|
|
if (famL_drive)
|
|
flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
|
|
f_obey_p_check|f_bit1;
|
|
else if (famV_drive)
|
|
flags_cmd_out=f_putcmd;
|
|
else
|
|
flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|
|
|
f_obey_p_check;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
if (pau_res==3) return (cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end));
|
|
else if (pau_res==1) drvcmd[0]=CMDT_PAUSE;
|
|
else return (-56);
|
|
}
|
|
i=cmd_out();
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_LockDoor(char lock)
|
|
{
|
|
int i;
|
|
|
|
if (fam0_drive) return (0);
|
|
msg(DBG_LCK,"cc_LockDoor: %d (drive %d)\n", lock, current_drive - D_S);
|
|
msg(DBG_LCS,"p_door_locked bit %d before\n", st_door_locked);
|
|
clr_cmdbuf();
|
|
response_count=0;
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_LOCK_CTL;
|
|
if (lock==1) drvcmd[1]=0x01;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_LOCK_CTL;
|
|
if (lock==1) drvcmd[4]=0x01;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus;
|
|
}
|
|
else if (famLV_drive)
|
|
{
|
|
drvcmd[0]=CMDL_LOCK_CTL;
|
|
if (lock==1) drvcmd[1]=0x01;
|
|
if (famL_drive)
|
|
flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
|
|
else
|
|
flags_cmd_out=f_putcmd;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
drvcmd[0]=CMDT_LOCK_CTL;
|
|
if (lock==1) drvcmd[4]=0x01;
|
|
}
|
|
i=cmd_out();
|
|
msg(DBG_LCS,"p_door_locked bit %d after\n", st_door_locked);
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
/*==========================================================================*/
|
|
static int UnLockDoor(void)
|
|
{
|
|
int i,j;
|
|
|
|
j=20;
|
|
do
|
|
{
|
|
i=cc_LockDoor(0);
|
|
--j;
|
|
sbp_sleep(1);
|
|
}
|
|
while ((i<0)&&(j));
|
|
if (i<0)
|
|
{
|
|
cc_DriveReset();
|
|
return -84;
|
|
}
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int LockDoor(void)
|
|
{
|
|
int i,j;
|
|
|
|
j=20;
|
|
do
|
|
{
|
|
i=cc_LockDoor(1);
|
|
--j;
|
|
sbp_sleep(1);
|
|
}
|
|
while ((i<0)&&(j));
|
|
if (j==0)
|
|
{
|
|
cc_DriveReset();
|
|
j=20;
|
|
do
|
|
{
|
|
i=cc_LockDoor(1);
|
|
--j;
|
|
sbp_sleep(1);
|
|
}
|
|
while ((i<0)&&(j));
|
|
}
|
|
return (i);
|
|
}
|
|
|
|
static int sbpcd_lock_door(struct cdrom_device_info *cdi, int lock)
|
|
{
|
|
return lock ? LockDoor() : UnLockDoor();
|
|
}
|
|
|
|
/*==========================================================================*/
|
|
static int cc_CloseTray(void)
|
|
{
|
|
int i;
|
|
|
|
if (fam0_drive) return (0);
|
|
msg(DBG_LCK,"cc_CloseTray (drive %d)\n", current_drive - D_S);
|
|
msg(DBG_LCS,"p_door_closed bit %d before\n", st_door_closed);
|
|
|
|
clr_cmdbuf();
|
|
response_count=0;
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_TRAY_CTL;
|
|
flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_TRAY_CTL;
|
|
drvcmd[1]=0x01;
|
|
drvcmd[4]=0x03; /* "insert" */
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus;
|
|
}
|
|
else if (famLV_drive)
|
|
{
|
|
drvcmd[0]=CMDL_TRAY_CTL;
|
|
if (famLV_drive)
|
|
flags_cmd_out=f_putcmd|f_respo2|f_lopsta|f_getsta|
|
|
f_ResponseStatus|f_obey_p_check|f_bit1;
|
|
else
|
|
flags_cmd_out=f_putcmd;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
drvcmd[0]=CMDT_TRAY_CTL;
|
|
drvcmd[4]=0x03; /* "insert" */
|
|
}
|
|
i=cmd_out();
|
|
msg(DBG_LCS,"p_door_closed bit %d after\n", st_door_closed);
|
|
|
|
i=cc_ReadError();
|
|
flags_cmd_out |= f_respo2;
|
|
cc_ReadStatus(); /* command: give 1-byte status */
|
|
i=ResponseStatus();
|
|
if (famT_drive&&(i<0))
|
|
{
|
|
cc_DriveReset();
|
|
i=ResponseStatus();
|
|
#if 0
|
|
sbp_sleep(HZ);
|
|
#endif /* 0 */
|
|
i=ResponseStatus();
|
|
}
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"sbpcd cc_CloseTray: ResponseStatus timed out (%d).\n",i);
|
|
}
|
|
if (!(famT_drive))
|
|
{
|
|
if (!st_spinning)
|
|
{
|
|
cc_SpinUp();
|
|
if (st_check) i=cc_ReadError();
|
|
flags_cmd_out |= f_respo2;
|
|
cc_ReadStatus();
|
|
i=ResponseStatus();
|
|
} else {
|
|
}
|
|
}
|
|
i=DiskInfo();
|
|
return (i);
|
|
}
|
|
|
|
static int sbpcd_tray_move(struct cdrom_device_info *cdi, int position)
|
|
{
|
|
int retval=0;
|
|
switch_drive(cdi->handle);
|
|
/* DUH! --AJK */
|
|
if(current_drive->CD_changed != 0xFF) {
|
|
current_drive->CD_changed=0xFF;
|
|
current_drive->diskstate_flags &= ~cd_size_bit;
|
|
}
|
|
if (position == 1) {
|
|
cc_SpinDown();
|
|
} else {
|
|
retval=cc_CloseTray();
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/*==========================================================================*/
|
|
static int cc_ReadSubQ(void)
|
|
{
|
|
int i,j;
|
|
|
|
current_drive->diskstate_flags &= ~subq_bit;
|
|
for (j=255;j>0;j--)
|
|
{
|
|
clr_cmdbuf();
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_READSUBQ;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
response_count=11;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_READSUBQ;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[3]=0x01;
|
|
flags_cmd_out=f_putcmd;
|
|
response_count=10;
|
|
}
|
|
else if (fam0LV_drive)
|
|
{
|
|
drvcmd[0]=CMD0_READSUBQ;
|
|
drvcmd[1]=0x02;
|
|
if (famLV_drive)
|
|
flags_cmd_out=f_putcmd;
|
|
else
|
|
flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
response_count=13;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
response_count=12;
|
|
drvcmd[0]=CMDT_READSUBQ;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[2]=0x40;
|
|
drvcmd[3]=0x01;
|
|
drvcmd[8]=response_count;
|
|
}
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
for (i=0;i<response_count;i++)
|
|
{
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_SQ1,"cc_ReadSubQ:%s\n", msgbuf);
|
|
}
|
|
if (famT_drive) break;
|
|
if (infobuf[0]!=0) break;
|
|
if ((!st_spinning) || (j==1))
|
|
{
|
|
current_drive->SubQ_ctl_adr=current_drive->SubQ_trk=current_drive->SubQ_pnt_idx=current_drive->SubQ_whatisthis=0;
|
|
current_drive->SubQ_run_tot=current_drive->SubQ_run_trk=0;
|
|
return (0);
|
|
}
|
|
}
|
|
if (famT_drive) current_drive->SubQ_ctl_adr=infobuf[1];
|
|
else current_drive->SubQ_ctl_adr=swap_nibbles(infobuf[1]);
|
|
current_drive->SubQ_trk=byt2bcd(infobuf[2]);
|
|
current_drive->SubQ_pnt_idx=byt2bcd(infobuf[3]);
|
|
if (fam0LV_drive) i=5;
|
|
else if (fam12_drive) i=4;
|
|
else if (famT_drive) i=8;
|
|
current_drive->SubQ_run_tot=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
|
|
i=7;
|
|
if (fam0LV_drive) i=9;
|
|
else if (fam12_drive) i=7;
|
|
else if (famT_drive) i=4;
|
|
current_drive->SubQ_run_trk=make32(make16(0,infobuf[i]),make16(infobuf[i+1],infobuf[i+2])); /* msf-bin */
|
|
current_drive->SubQ_whatisthis=infobuf[i+3];
|
|
current_drive->diskstate_flags |= subq_bit;
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_ModeSense(void)
|
|
{
|
|
int i;
|
|
|
|
if (fam2_drive) return (0);
|
|
if (famV_drive) return (0);
|
|
current_drive->diskstate_flags &= ~frame_size_bit;
|
|
clr_cmdbuf();
|
|
if (fam1_drive)
|
|
{
|
|
response_count=5;
|
|
drvcmd[0]=CMD1_GETMODE;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam0L_drive)
|
|
{
|
|
response_count=2;
|
|
drvcmd[0]=CMD0_GETMODE;
|
|
if (famL_drive) flags_cmd_out=f_putcmd;
|
|
else flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
response_count=10;
|
|
drvcmd[0]=CMDT_GETMODE;
|
|
drvcmd[4]=response_count;
|
|
}
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
i=0;
|
|
current_drive->sense_byte=0;
|
|
if (fam1_drive) current_drive->sense_byte=infobuf[i++];
|
|
else if (famT_drive)
|
|
{
|
|
if (infobuf[4]==0x01) current_drive->xa_byte=0x20;
|
|
else current_drive->xa_byte=0;
|
|
i=2;
|
|
}
|
|
current_drive->frame_size=make16(infobuf[i],infobuf[i+1]);
|
|
for (i=0;i<response_count;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_XA1,"cc_ModeSense:%s\n", msgbuf);
|
|
|
|
current_drive->diskstate_flags |= frame_size_bit;
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
/*==========================================================================*/
|
|
static int cc_ModeSelect(int framesize)
|
|
{
|
|
int i;
|
|
|
|
if (fam2_drive) return (0);
|
|
if (famV_drive) return (0);
|
|
current_drive->diskstate_flags &= ~frame_size_bit;
|
|
clr_cmdbuf();
|
|
current_drive->frame_size=framesize;
|
|
if (framesize==CD_FRAMESIZE_RAW) current_drive->sense_byte=0x82;
|
|
else current_drive->sense_byte=0x00;
|
|
|
|
msg(DBG_XA1,"cc_ModeSelect: %02X %04X\n",
|
|
current_drive->sense_byte, current_drive->frame_size);
|
|
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_SETMODE;
|
|
drvcmd[1]=0x00;
|
|
drvcmd[2]=current_drive->sense_byte;
|
|
drvcmd[3]=(current_drive->frame_size>>8)&0xFF;
|
|
drvcmd[4]=current_drive->frame_size&0xFF;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam0L_drive)
|
|
{
|
|
drvcmd[0]=CMD0_SETMODE;
|
|
drvcmd[1]=0x00;
|
|
drvcmd[2]=(current_drive->frame_size>>8)&0xFF;
|
|
drvcmd[3]=current_drive->frame_size&0xFF;
|
|
drvcmd[4]=0x00;
|
|
if(famL_drive)
|
|
flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
else
|
|
flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
return (-1);
|
|
}
|
|
response_count=0;
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
current_drive->diskstate_flags |= frame_size_bit;
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_GetVolume(void)
|
|
{
|
|
int i;
|
|
u_char switches;
|
|
u_char chan0=0;
|
|
u_char vol0=0;
|
|
u_char chan1=1;
|
|
u_char vol1=0;
|
|
|
|
if (famV_drive) return (0);
|
|
current_drive->diskstate_flags &= ~volume_bit;
|
|
clr_cmdbuf();
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_GETMODE;
|
|
drvcmd[1]=0x05;
|
|
response_count=5;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_GETMODE;
|
|
drvcmd[1]=0x0E;
|
|
response_count=5;
|
|
flags_cmd_out=f_putcmd;
|
|
}
|
|
else if (fam0L_drive)
|
|
{
|
|
drvcmd[0]=CMD0_GETMODE;
|
|
drvcmd[1]=0x03;
|
|
response_count=2;
|
|
if(famL_drive)
|
|
flags_cmd_out=f_putcmd;
|
|
else
|
|
flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
i=cc_get_mode_T();
|
|
if (i<0) return (i);
|
|
}
|
|
if (!famT_drive)
|
|
{
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
}
|
|
if (fam1_drive)
|
|
{
|
|
chan0=infobuf[1]&0x0F;
|
|
vol0=infobuf[2];
|
|
chan1=infobuf[3]&0x0F;
|
|
vol1=infobuf[4];
|
|
if (chan0==0)
|
|
{
|
|
chan0=1;
|
|
vol0=0;
|
|
}
|
|
if (chan1==0)
|
|
{
|
|
chan1=2;
|
|
vol1=0;
|
|
}
|
|
chan0 >>= 1;
|
|
chan1 >>= 1;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
chan0=infobuf[1];
|
|
vol0=infobuf[2];
|
|
chan1=infobuf[3];
|
|
vol1=infobuf[4];
|
|
}
|
|
else if (famL_drive)
|
|
{
|
|
chan0=0;
|
|
chan1=1;
|
|
vol0=vol1=infobuf[1];
|
|
switches=infobuf[0];
|
|
if ((switches&0x80)!=0) chan0=1;
|
|
if ((switches&0x40)!=0) chan1=0;
|
|
}
|
|
else if (fam0_drive) /* different firmware levels */
|
|
{
|
|
chan0=0;
|
|
chan1=1;
|
|
vol0=vol1=infobuf[1];
|
|
if (current_drive->drv_type>=drv_201)
|
|
{
|
|
if (current_drive->drv_type<drv_300)
|
|
{
|
|
switches=infobuf[0];
|
|
if ((switches&0x80)!=0) vol0=0;
|
|
if ((switches&0x40)!=0) vol1=0;
|
|
if (current_drive->drv_type>=drv_211)
|
|
{
|
|
if ((switches&0x20)!=0) chan0=1;
|
|
if ((switches&0x10)!=0) chan1=0;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
vol0=infobuf[0];
|
|
if ((vol0&0x01)!=0) chan0=1;
|
|
if ((vol1&0x01)==0) chan1=0;
|
|
vol0 &= 0xFC;
|
|
vol1 &= 0xFC;
|
|
if (vol0!=0) vol0 += 3;
|
|
if (vol1!=0) vol1 += 3;
|
|
}
|
|
}
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
current_drive->volume_control=infobuf[7];
|
|
chan0=0;
|
|
chan1=1;
|
|
if (current_drive->volume_control&0x10) vol0=0;
|
|
else vol0=0xff;
|
|
if (current_drive->volume_control&0x20) vol1=0;
|
|
else vol1=0xff;
|
|
}
|
|
current_drive->vol_chan0=chan0;
|
|
current_drive->vol_ctrl0=vol0;
|
|
current_drive->vol_chan1=chan1;
|
|
current_drive->vol_ctrl1=vol1;
|
|
#if 000
|
|
current_drive->vol_chan2=2;
|
|
current_drive->vol_ctrl2=0xFF;
|
|
current_drive->vol_chan3=3;
|
|
current_drive->vol_ctrl3=0xFF;
|
|
#endif /* 000 */
|
|
current_drive->diskstate_flags |= volume_bit;
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_ReadCapacity(void)
|
|
{
|
|
int i, j;
|
|
|
|
if (fam2_drive) return (0); /* some firmware lacks this command */
|
|
if (famLV_drive) return (0); /* some firmware lacks this command */
|
|
if (famT_drive) return (0); /* done with cc_ReadTocDescr() */
|
|
current_drive->diskstate_flags &= ~cd_size_bit;
|
|
for (j=3;j>0;j--)
|
|
{
|
|
clr_cmdbuf();
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_CAPACITY;
|
|
response_count=5;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
#if 00
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_CAPACITY;
|
|
response_count=8;
|
|
flags_cmd_out=f_putcmd;
|
|
}
|
|
#endif
|
|
else if (fam0_drive)
|
|
{
|
|
drvcmd[0]=CMD0_CAPACITY;
|
|
response_count=5;
|
|
flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
i=cmd_out();
|
|
if (i>=0) break;
|
|
msg(DBG_000,"cc_ReadCapacity: cmd_out: err %d\n", i);
|
|
cc_ReadError();
|
|
}
|
|
if (j==0) return (i);
|
|
if (fam1_drive) current_drive->CDsize_frm=msf2blk(make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2])))+CD_MSF_OFFSET;
|
|
else if (fam0_drive) current_drive->CDsize_frm=make32(make16(0,infobuf[0]),make16(infobuf[1],infobuf[2]));
|
|
#if 00
|
|
else if (fam2_drive) current_drive->CDsize_frm=make32(make16(infobuf[0],infobuf[1]),make16(infobuf[2],infobuf[3]));
|
|
#endif
|
|
current_drive->diskstate_flags |= cd_size_bit;
|
|
msg(DBG_000,"cc_ReadCapacity: %d frames.\n", current_drive->CDsize_frm);
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_ReadTocDescr(void)
|
|
{
|
|
int i;
|
|
|
|
current_drive->diskstate_flags &= ~toc_bit;
|
|
clr_cmdbuf();
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_DISKINFO;
|
|
response_count=6;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam0LV_drive)
|
|
{
|
|
drvcmd[0]=CMD0_DISKINFO;
|
|
response_count=6;
|
|
if(famLV_drive)
|
|
flags_cmd_out=f_putcmd;
|
|
else
|
|
flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
/* possibly longer timeout periods necessary */
|
|
current_drive->f_multisession=0;
|
|
drvcmd[0]=CMD2_DISKINFO;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[2]=0xAB;
|
|
drvcmd[3]=0xFF; /* session */
|
|
response_count=8;
|
|
flags_cmd_out=f_putcmd;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
current_drive->f_multisession=0;
|
|
response_count=12;
|
|
drvcmd[0]=CMDT_DISKINFO;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[6]=CDROM_LEADOUT;
|
|
drvcmd[8]=response_count;
|
|
drvcmd[9]=0x00;
|
|
}
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
if ((famT_drive)&&(i<response_count)) return (-100-i);
|
|
if ((fam1_drive)||(fam2_drive)||(fam0LV_drive))
|
|
current_drive->xa_byte=infobuf[0];
|
|
if (fam2_drive)
|
|
{
|
|
current_drive->first_session=infobuf[1];
|
|
current_drive->last_session=infobuf[2];
|
|
current_drive->n_first_track=infobuf[3];
|
|
current_drive->n_last_track=infobuf[4];
|
|
if (current_drive->first_session!=current_drive->last_session)
|
|
{
|
|
current_drive->f_multisession=1;
|
|
current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7])));
|
|
}
|
|
#if 0
|
|
if (current_drive->first_session!=current_drive->last_session)
|
|
{
|
|
if (current_drive->last_session<=20)
|
|
zwanzig=current_drive->last_session+1;
|
|
else zwanzig=20;
|
|
for (count=current_drive->first_session;count<zwanzig;count++)
|
|
{
|
|
drvcmd[0]=CMD2_DISKINFO;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[2]=0xAB;
|
|
drvcmd[3]=count;
|
|
response_count=8;
|
|
flags_cmd_out=f_putcmd;
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
current_drive->msf_multi_n[count]=make32(make16(0,infobuf[5]),make16(infobuf[6],infobuf[7]));
|
|
}
|
|
current_drive->diskstate_flags |= multisession_bit;
|
|
}
|
|
#endif
|
|
drvcmd[0]=CMD2_DISKINFO;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[2]=0xAA;
|
|
drvcmd[3]=0xFF;
|
|
response_count=5;
|
|
flags_cmd_out=f_putcmd;
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
current_drive->size_msf=make32(make16(0,infobuf[2]),make16(infobuf[3],infobuf[4]));
|
|
current_drive->size_blk=msf2blk(current_drive->size_msf);
|
|
current_drive->CDsize_frm=current_drive->size_blk+1;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
current_drive->size_msf=make32(make16(infobuf[8],infobuf[9]),make16(infobuf[10],infobuf[11]));
|
|
current_drive->size_blk=msf2blk(current_drive->size_msf);
|
|
current_drive->CDsize_frm=current_drive->size_blk+1;
|
|
current_drive->n_first_track=infobuf[2];
|
|
current_drive->n_last_track=infobuf[3];
|
|
}
|
|
else
|
|
{
|
|
current_drive->n_first_track=infobuf[1];
|
|
current_drive->n_last_track=infobuf[2];
|
|
current_drive->size_msf=make32(make16(0,infobuf[3]),make16(infobuf[4],infobuf[5]));
|
|
current_drive->size_blk=msf2blk(current_drive->size_msf);
|
|
if (famLV_drive) current_drive->CDsize_frm=current_drive->size_blk+1;
|
|
}
|
|
current_drive->diskstate_flags |= toc_bit;
|
|
msg(DBG_TOC,"TocDesc: xa %02X firstt %02X lastt %02X size %08X firstses %02X lastsess %02X\n",
|
|
current_drive->xa_byte,
|
|
current_drive->n_first_track,
|
|
current_drive->n_last_track,
|
|
current_drive->size_msf,
|
|
current_drive->first_session,
|
|
current_drive->last_session);
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_ReadTocEntry(int num)
|
|
{
|
|
int i;
|
|
|
|
clr_cmdbuf();
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_READTOC;
|
|
drvcmd[2]=num;
|
|
response_count=8;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
/* possibly longer timeout periods necessary */
|
|
drvcmd[0]=CMD2_DISKINFO;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[2]=num;
|
|
response_count=5;
|
|
flags_cmd_out=f_putcmd;
|
|
}
|
|
else if (fam0LV_drive)
|
|
{
|
|
drvcmd[0]=CMD0_READTOC;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[2]=num;
|
|
response_count=8;
|
|
if (famLV_drive)
|
|
flags_cmd_out=f_putcmd;
|
|
else
|
|
flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
response_count=12;
|
|
drvcmd[0]=CMDT_DISKINFO;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[6]=num;
|
|
drvcmd[8]=response_count;
|
|
drvcmd[9]=0x00;
|
|
}
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
if ((famT_drive)&&(i<response_count)) return (-100-i);
|
|
if ((fam1_drive)||(fam0LV_drive))
|
|
{
|
|
current_drive->TocEnt_nixbyte=infobuf[0];
|
|
i=1;
|
|
}
|
|
else if (fam2_drive) i=0;
|
|
else if (famT_drive) i=5;
|
|
current_drive->TocEnt_ctl_adr=swap_nibbles(infobuf[i++]);
|
|
if ((fam1_drive)||(fam0L_drive))
|
|
{
|
|
current_drive->TocEnt_number=infobuf[i++];
|
|
current_drive->TocEnt_format=infobuf[i];
|
|
}
|
|
else
|
|
{
|
|
current_drive->TocEnt_number=num;
|
|
current_drive->TocEnt_format=0;
|
|
}
|
|
if (fam1_drive) i=4;
|
|
else if (fam0LV_drive) i=5;
|
|
else if (fam2_drive) i=2;
|
|
else if (famT_drive) i=9;
|
|
current_drive->TocEnt_address=make32(make16(0,infobuf[i]),
|
|
make16(infobuf[i+1],infobuf[i+2]));
|
|
for (i=0;i<response_count;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_ECS,"TocEntry:%s\n", msgbuf);
|
|
msg(DBG_TOC,"TocEntry: %02X %02X %02X %02X %08X\n",
|
|
current_drive->TocEnt_nixbyte, current_drive->TocEnt_ctl_adr,
|
|
current_drive->TocEnt_number, current_drive->TocEnt_format,
|
|
current_drive->TocEnt_address);
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_ReadPacket(void)
|
|
{
|
|
int i;
|
|
|
|
clr_cmdbuf();
|
|
drvcmd[0]=CMD0_PACKET;
|
|
drvcmd[1]=response_count;
|
|
if(famL_drive) flags_cmd_out=f_putcmd;
|
|
else if (fam01_drive)
|
|
flags_cmd_out=f_putcmd|f_getsta|f_ResponseStatus|f_obey_p_check;
|
|
else if (fam2_drive) return (-1); /* not implemented yet */
|
|
else if (famT_drive)
|
|
{
|
|
return (-1);
|
|
}
|
|
i=cmd_out();
|
|
return (i);
|
|
}
|
|
/*==========================================================================*/
|
|
static int convert_UPC(u_char *p)
|
|
{
|
|
int i;
|
|
|
|
p++;
|
|
if (fam0L_drive) p[13]=0;
|
|
for (i=0;i<7;i++)
|
|
{
|
|
if (fam1_drive) current_drive->UPC_buf[i]=swap_nibbles(*p++);
|
|
else if (fam0L_drive)
|
|
{
|
|
current_drive->UPC_buf[i]=((*p++)<<4)&0xFF;
|
|
current_drive->UPC_buf[i] |= *p++;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
return (-1);
|
|
}
|
|
else /* CD200 */
|
|
{
|
|
return (-1);
|
|
}
|
|
}
|
|
current_drive->UPC_buf[6] &= 0xF0;
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int cc_ReadUPC(void)
|
|
{
|
|
int i;
|
|
#if TEST_UPC
|
|
int block, checksum;
|
|
#endif /* TEST_UPC */
|
|
|
|
if (fam2_drive) return (0); /* not implemented yet */
|
|
if (famT_drive) return (0); /* not implemented yet */
|
|
if (famV_drive) return (0); /* not implemented yet */
|
|
#if 1
|
|
if (fam0_drive) return (0); /* but it should work */
|
|
#endif
|
|
|
|
current_drive->diskstate_flags &= ~upc_bit;
|
|
#if TEST_UPC
|
|
for (block=CD_MSF_OFFSET+1;block<CD_MSF_OFFSET+200;block++)
|
|
{
|
|
#endif /* TEST_UPC */
|
|
clr_cmdbuf();
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_READ_UPC;
|
|
#if TEST_UPC
|
|
drvcmd[1]=(block>>16)&0xFF;
|
|
drvcmd[2]=(block>>8)&0xFF;
|
|
drvcmd[3]=block&0xFF;
|
|
#endif /* TEST_UPC */
|
|
response_count=8;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam0L_drive)
|
|
{
|
|
drvcmd[0]=CMD0_READ_UPC;
|
|
#if TEST_UPC
|
|
drvcmd[2]=(block>>16)&0xFF;
|
|
drvcmd[3]=(block>>8)&0xFF;
|
|
drvcmd[4]=block&0xFF;
|
|
#endif /* TEST_UPC */
|
|
response_count=0;
|
|
flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
return (-1);
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
return (-1);
|
|
}
|
|
i=cmd_out();
|
|
if (i<0)
|
|
{
|
|
msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i);
|
|
return (i);
|
|
}
|
|
if (fam0L_drive)
|
|
{
|
|
response_count=16;
|
|
if (famL_drive) flags_cmd_out=f_putcmd;
|
|
i=cc_ReadPacket();
|
|
if (i<0)
|
|
{
|
|
msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i);
|
|
return (i);
|
|
}
|
|
}
|
|
#if TEST_UPC
|
|
checksum=0;
|
|
#endif /* TEST_UPC */
|
|
for (i=0;i<(fam1_drive?8:16);i++)
|
|
{
|
|
#if TEST_UPC
|
|
checksum |= infobuf[i];
|
|
#endif /* TEST_UPC */
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
}
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_UPC,"UPC info:%s\n", msgbuf);
|
|
#if TEST_UPC
|
|
if ((checksum&0x7F)!=0) break;
|
|
}
|
|
#endif /* TEST_UPC */
|
|
current_drive->UPC_ctl_adr=0;
|
|
if (fam1_drive) i=0;
|
|
else i=2;
|
|
if ((infobuf[i]&0x80)!=0)
|
|
{
|
|
convert_UPC(&infobuf[i]);
|
|
current_drive->UPC_ctl_adr = (current_drive->TocEnt_ctl_adr & 0xF0) | 0x02;
|
|
}
|
|
for (i=0;i<7;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", current_drive->UPC_buf[i]);
|
|
sprintf(&msgbuf[i*3], " (%02X)", current_drive->UPC_ctl_adr);
|
|
msgbuf[i*3+5]=0;
|
|
msg(DBG_UPC,"UPC code:%s\n", msgbuf);
|
|
current_drive->diskstate_flags |= upc_bit;
|
|
return (0);
|
|
}
|
|
|
|
static int sbpcd_get_mcn(struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)
|
|
{
|
|
int i;
|
|
unsigned char *mcnp = mcn->medium_catalog_number;
|
|
unsigned char *resp;
|
|
|
|
current_drive->diskstate_flags &= ~upc_bit;
|
|
clr_cmdbuf();
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_READ_UPC;
|
|
response_count=8;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
}
|
|
else if (fam0L_drive)
|
|
{
|
|
drvcmd[0]=CMD0_READ_UPC;
|
|
response_count=0;
|
|
flags_cmd_out=f_putcmd|f_lopsta|f_getsta|f_ResponseStatus|f_obey_p_check|f_bit1;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
return (-1);
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
return (-1);
|
|
}
|
|
i=cmd_out();
|
|
if (i<0)
|
|
{
|
|
msg(DBG_000,"cc_ReadUPC cmd_out: err %d\n", i);
|
|
return (i);
|
|
}
|
|
if (fam0L_drive)
|
|
{
|
|
response_count=16;
|
|
if (famL_drive) flags_cmd_out=f_putcmd;
|
|
i=cc_ReadPacket();
|
|
if (i<0)
|
|
{
|
|
msg(DBG_000,"cc_ReadUPC ReadPacket: err %d\n", i);
|
|
return (i);
|
|
}
|
|
}
|
|
current_drive->UPC_ctl_adr=0;
|
|
if (fam1_drive) i=0;
|
|
else i=2;
|
|
|
|
resp = infobuf + i;
|
|
if (*resp++ == 0x80) {
|
|
/* packed bcd to single ASCII digits */
|
|
*mcnp++ = (*resp >> 4) + '0';
|
|
*mcnp++ = (*resp++ & 0x0f) + '0';
|
|
*mcnp++ = (*resp >> 4) + '0';
|
|
*mcnp++ = (*resp++ & 0x0f) + '0';
|
|
*mcnp++ = (*resp >> 4) + '0';
|
|
*mcnp++ = (*resp++ & 0x0f) + '0';
|
|
*mcnp++ = (*resp >> 4) + '0';
|
|
*mcnp++ = (*resp++ & 0x0f) + '0';
|
|
*mcnp++ = (*resp >> 4) + '0';
|
|
*mcnp++ = (*resp++ & 0x0f) + '0';
|
|
*mcnp++ = (*resp >> 4) + '0';
|
|
*mcnp++ = (*resp++ & 0x0f) + '0';
|
|
*mcnp++ = (*resp >> 4) + '0';
|
|
}
|
|
*mcnp = '\0';
|
|
|
|
current_drive->diskstate_flags |= upc_bit;
|
|
return (0);
|
|
}
|
|
|
|
/*==========================================================================*/
|
|
static int cc_CheckMultiSession(void)
|
|
{
|
|
int i;
|
|
|
|
if (fam2_drive) return (0);
|
|
current_drive->f_multisession=0;
|
|
current_drive->lba_multi=0;
|
|
if (fam0_drive) return (0);
|
|
clr_cmdbuf();
|
|
if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_MULTISESS;
|
|
response_count=6;
|
|
flags_cmd_out=f_putcmd|f_ResponseStatus|f_obey_p_check;
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
if ((infobuf[0]&0x80)!=0)
|
|
{
|
|
current_drive->f_multisession=1;
|
|
current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[1]),
|
|
make16(infobuf[2],infobuf[3])));
|
|
}
|
|
}
|
|
else if (famLV_drive)
|
|
{
|
|
drvcmd[0]=CMDL_MULTISESS;
|
|
drvcmd[1]=3;
|
|
drvcmd[2]=1;
|
|
response_count=8;
|
|
flags_cmd_out=f_putcmd;
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[5]),
|
|
make16(infobuf[6],infobuf[7])));
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
response_count=12;
|
|
drvcmd[0]=CMDT_DISKINFO;
|
|
drvcmd[1]=0x02;
|
|
drvcmd[6]=0;
|
|
drvcmd[8]=response_count;
|
|
drvcmd[9]=0x40;
|
|
i=cmd_out();
|
|
if (i<0) return (i);
|
|
if (i<response_count) return (-100-i);
|
|
current_drive->first_session=infobuf[2];
|
|
current_drive->last_session=infobuf[3];
|
|
current_drive->track_of_last_session=infobuf[6];
|
|
if (current_drive->first_session!=current_drive->last_session)
|
|
{
|
|
current_drive->f_multisession=1;
|
|
current_drive->lba_multi=msf2blk(make32(make16(0,infobuf[9]),make16(infobuf[10],infobuf[11])));
|
|
}
|
|
}
|
|
for (i=0;i<response_count;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_MUL,"MultiSession Info:%s (%d)\n", msgbuf, current_drive->lba_multi);
|
|
if (current_drive->lba_multi>200)
|
|
{
|
|
current_drive->f_multisession=1;
|
|
msg(DBG_MUL,"MultiSession base: %06X\n", current_drive->lba_multi);
|
|
}
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
#ifdef FUTURE
|
|
static int cc_SubChanInfo(int frame, int count, u_char *buffer)
|
|
/* "frame" is a RED BOOK (msf-bin) address */
|
|
{
|
|
int i;
|
|
|
|
if (fam0LV_drive) return (-ENOSYS); /* drive firmware lacks it */
|
|
if (famT_drive)
|
|
{
|
|
return (-1);
|
|
}
|
|
#if 0
|
|
if (current_drive->audio_state!=audio_playing) return (-ENODATA);
|
|
#endif
|
|
clr_cmdbuf();
|
|
drvcmd[0]=CMD1_SUBCHANINF;
|
|
drvcmd[1]=(frame>>16)&0xFF;
|
|
drvcmd[2]=(frame>>8)&0xFF;
|
|
drvcmd[3]=frame&0xFF;
|
|
drvcmd[5]=(count>>8)&0xFF;
|
|
drvcmd[6]=count&0xFF;
|
|
flags_cmd_out=f_putcmd|f_respo2|f_ResponseStatus|f_obey_p_check;
|
|
cmd_type=READ_SC;
|
|
current_drive->frame_size=CD_FRAMESIZE_SUB;
|
|
i=cmd_out(); /* which buffer to use? */
|
|
return (i);
|
|
}
|
|
#endif /* FUTURE */
|
|
/*==========================================================================*/
|
|
static void __init check_datarate(void)
|
|
{
|
|
int i=0;
|
|
|
|
msg(DBG_IOX,"check_datarate entered.\n");
|
|
datarate=0;
|
|
#if TEST_STI
|
|
for (i=0;i<=1000;i++) printk(".");
|
|
#endif
|
|
/* set a timer to make (timed_out_delay!=0) after 1.1 seconds */
|
|
#if 1
|
|
del_timer(&delay_timer);
|
|
#endif
|
|
delay_timer.expires=jiffies+11*HZ/10;
|
|
timed_out_delay=0;
|
|
add_timer(&delay_timer);
|
|
#if 0
|
|
msg(DBG_TIM,"delay timer started (11*HZ/10).\n");
|
|
#endif
|
|
do
|
|
{
|
|
i=inb(CDi_status);
|
|
datarate++;
|
|
#if 1
|
|
if (datarate>0x6FFFFFFF) break;
|
|
#endif
|
|
}
|
|
while (!timed_out_delay);
|
|
del_timer(&delay_timer);
|
|
#if 0
|
|
msg(DBG_TIM,"datarate: %04X\n", datarate);
|
|
#endif
|
|
if (datarate<65536) datarate=65536;
|
|
maxtim16=datarate*16;
|
|
maxtim04=datarate*4;
|
|
maxtim02=datarate*2;
|
|
maxtim_8=datarate/32;
|
|
#if LONG_TIMING
|
|
maxtim_data=datarate/100;
|
|
#else
|
|
maxtim_data=datarate/300;
|
|
#endif /* LONG_TIMING */
|
|
#if 0
|
|
msg(DBG_TIM,"maxtim_8 %d, maxtim_data %d.\n", maxtim_8, maxtim_data);
|
|
#endif
|
|
}
|
|
/*==========================================================================*/
|
|
#if 0
|
|
static int c2_ReadError(int fam)
|
|
{
|
|
int i;
|
|
|
|
clr_cmdbuf();
|
|
response_count=9;
|
|
clr_respo_buf(9);
|
|
if (fam==1)
|
|
{
|
|
drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
|
|
i=do_cmd(f_putcmd|f_lopsta|f_getsta|f_ResponseStatus);
|
|
}
|
|
else if (fam==2)
|
|
{
|
|
drvcmd[0]=CMD2_READ_ERR;
|
|
i=do_cmd(f_putcmd);
|
|
}
|
|
else return (-1);
|
|
return (i);
|
|
}
|
|
#endif
|
|
/*==========================================================================*/
|
|
static void __init ask_mail(void)
|
|
{
|
|
int i;
|
|
|
|
msg(DBG_INF, "please mail the following lines to emoenke@gwdg.de\n");
|
|
msg(DBG_INF, "(don't mail if you are not using the actual kernel):\n");
|
|
msg(DBG_INF, "%s\n", VERSION);
|
|
msg(DBG_INF, "address %03X, type %s, drive %s (ID %d)\n",
|
|
CDo_command, type, current_drive->drive_model, current_drive->drv_id);
|
|
for (i=0;i<12;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_INF,"infobuf =%s\n", msgbuf);
|
|
for (i=0;i<12;i++)
|
|
sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_INF,"infobuf =%s\n", msgbuf);
|
|
}
|
|
/*==========================================================================*/
|
|
static int __init check_version(void)
|
|
{
|
|
int i, j, l;
|
|
int teac_possible=0;
|
|
|
|
msg(DBG_INI,"check_version: id=%d, d=%d.\n", current_drive->drv_id, current_drive - D_S);
|
|
current_drive->drv_type=0;
|
|
|
|
/* check for CR-52x, CR-56x, LCS-7260 and ECS-AT */
|
|
/* clear any pending error state */
|
|
clr_cmdbuf();
|
|
drvcmd[0]=CMD0_READ_ERR; /* same as CMD1_ and CMDL_ */
|
|
response_count=9;
|
|
flags_cmd_out=f_putcmd;
|
|
i=cmd_out();
|
|
if (i<0) msg(DBG_INI,"CMD0_READ_ERR returns %d (ok anyway).\n",i);
|
|
/* read drive version */
|
|
clr_cmdbuf();
|
|
for (i=0;i<12;i++) infobuf[i]=0;
|
|
drvcmd[0]=CMD0_READ_VER; /* same as CMD1_ and CMDL_ */
|
|
response_count=12; /* fam1: only 11 */
|
|
flags_cmd_out=f_putcmd;
|
|
i=cmd_out();
|
|
if (i<-1) msg(DBG_INI,"CMD0_READ_VER returns %d\n",i);
|
|
if (i==-11) teac_possible++;
|
|
j=0;
|
|
for (i=0;i<12;i++) j+=infobuf[i];
|
|
if (j)
|
|
{
|
|
for (i=0;i<12;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_ECS,"infobuf =%s\n", msgbuf);
|
|
for (i=0;i<12;i++)
|
|
sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_ECS,"infobuf =%s\n", msgbuf);
|
|
}
|
|
for (i=0;i<4;i++) if (infobuf[i]!=family1[i]) break;
|
|
if (i==4)
|
|
{
|
|
current_drive->drive_model[0]='C';
|
|
current_drive->drive_model[1]='R';
|
|
current_drive->drive_model[2]='-';
|
|
current_drive->drive_model[3]='5';
|
|
current_drive->drive_model[4]=infobuf[i++];
|
|
current_drive->drive_model[5]=infobuf[i++];
|
|
current_drive->drive_model[6]=0;
|
|
current_drive->drv_type=drv_fam1;
|
|
}
|
|
if (!current_drive->drv_type)
|
|
{
|
|
for (i=0;i<8;i++) if (infobuf[i]!=family0[i]) break;
|
|
if (i==8)
|
|
{
|
|
current_drive->drive_model[0]='C';
|
|
current_drive->drive_model[1]='R';
|
|
current_drive->drive_model[2]='-';
|
|
current_drive->drive_model[3]='5';
|
|
current_drive->drive_model[4]='2';
|
|
current_drive->drive_model[5]='x';
|
|
current_drive->drive_model[6]=0;
|
|
current_drive->drv_type=drv_fam0;
|
|
}
|
|
}
|
|
if (!current_drive->drv_type)
|
|
{
|
|
for (i=0;i<8;i++) if (infobuf[i]!=familyL[i]) break;
|
|
if (i==8)
|
|
{
|
|
for (j=0;j<8;j++)
|
|
current_drive->drive_model[j]=infobuf[j];
|
|
current_drive->drive_model[8]=0;
|
|
current_drive->drv_type=drv_famL;
|
|
}
|
|
}
|
|
if (!current_drive->drv_type)
|
|
{
|
|
for (i=0;i<6;i++) if (infobuf[i]!=familyV[i]) break;
|
|
if (i==6)
|
|
{
|
|
for (j=0;j<6;j++)
|
|
current_drive->drive_model[j]=infobuf[j];
|
|
current_drive->drive_model[6]=0;
|
|
current_drive->drv_type=drv_famV;
|
|
i+=2; /* 2 blanks before version */
|
|
}
|
|
}
|
|
if (!current_drive->drv_type)
|
|
{
|
|
/* check for CD200 */
|
|
clr_cmdbuf();
|
|
drvcmd[0]=CMD2_READ_ERR;
|
|
response_count=9;
|
|
flags_cmd_out=f_putcmd;
|
|
i=cmd_out();
|
|
if (i<0) msg(DBG_INI,"CMD2_READERR returns %d (ok anyway).\n",i);
|
|
if (i<0) msg(DBG_000,"CMD2_READERR returns %d (ok anyway).\n",i);
|
|
/* read drive version */
|
|
clr_cmdbuf();
|
|
for (i=0;i<12;i++) infobuf[i]=0;
|
|
if (sbpro_type==1) OUT(CDo_sel_i_d,0);
|
|
#if 0
|
|
OUT(CDo_reset,0);
|
|
sbp_sleep(6*HZ);
|
|
OUT(CDo_enable,current_drive->drv_sel);
|
|
#endif
|
|
drvcmd[0]=CMD2_READ_VER;
|
|
response_count=12;
|
|
flags_cmd_out=f_putcmd;
|
|
i=cmd_out();
|
|
if (i<0) msg(DBG_INI,"CMD2_READ_VER returns %d\n",i);
|
|
if (i==-7) teac_possible++;
|
|
j=0;
|
|
for (i=0;i<12;i++) j+=infobuf[i];
|
|
if (j)
|
|
{
|
|
for (i=0;i<12;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_IDX,"infobuf =%s\n", msgbuf);
|
|
for (i=0;i<12;i++)
|
|
sprintf(&msgbuf[i*3], " %c ", infobuf[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_IDX,"infobuf =%s\n", msgbuf);
|
|
}
|
|
if (i>=0)
|
|
{
|
|
for (i=0;i<5;i++) if (infobuf[i]!=family2[i]) break;
|
|
if (i==5)
|
|
{
|
|
current_drive->drive_model[0]='C';
|
|
current_drive->drive_model[1]='D';
|
|
current_drive->drive_model[2]='2';
|
|
current_drive->drive_model[3]='0';
|
|
current_drive->drive_model[4]='0';
|
|
current_drive->drive_model[5]=infobuf[i++];
|
|
current_drive->drive_model[6]=infobuf[i++];
|
|
current_drive->drive_model[7]=0;
|
|
current_drive->drv_type=drv_fam2;
|
|
}
|
|
}
|
|
}
|
|
if (!current_drive->drv_type)
|
|
{
|
|
/* check for TEAC CD-55A */
|
|
msg(DBG_TEA,"teac_possible: %d\n",teac_possible);
|
|
for (j=1;j<=((current_drive->drv_id==0)?3:1);j++)
|
|
{
|
|
for (l=1;l<=((current_drive->drv_id==0)?10:1);l++)
|
|
{
|
|
msg(DBG_TEA,"TEAC reset #%d-%d.\n", j, l);
|
|
if (sbpro_type==1) OUT(CDo_reset,0);
|
|
else
|
|
{
|
|
OUT(CDo_enable,current_drive->drv_sel);
|
|
OUT(CDo_sel_i_d,0);
|
|
OUT(CDo_command,CMDT_RESET);
|
|
for (i=0;i<9;i++) OUT(CDo_command,0);
|
|
}
|
|
sbp_sleep(5*HZ/10);
|
|
OUT(CDo_enable,current_drive->drv_sel);
|
|
OUT(CDo_sel_i_d,0);
|
|
i=inb(CDi_status);
|
|
msg(DBG_TEA,"TEAC CDi_status: %02X.\n",i);
|
|
#if 0
|
|
if (i&s_not_result_ready) continue; /* drive not present or ready */
|
|
#endif
|
|
i=inb(CDi_info);
|
|
msg(DBG_TEA,"TEAC CDi_info: %02X.\n",i);
|
|
if (i==0x55) break; /* drive found */
|
|
}
|
|
if (i==0x55) break; /* drive found */
|
|
}
|
|
if (i==0x55) /* drive found */
|
|
{
|
|
msg(DBG_TEA,"TEAC drive found.\n");
|
|
clr_cmdbuf();
|
|
flags_cmd_out=f_putcmd;
|
|
response_count=12;
|
|
drvcmd[0]=CMDT_READ_VER;
|
|
drvcmd[4]=response_count;
|
|
for (i=0;i<12;i++) infobuf[i]=0;
|
|
i=cmd_out_T();
|
|
if (i!=0) msg(DBG_TEA,"cmd_out_T(CMDT_READ_VER) returns %d.\n",i);
|
|
for (i=1;i<6;i++) if (infobuf[i]!=familyT[i-1]) break;
|
|
if (i==6)
|
|
{
|
|
current_drive->drive_model[0]='C';
|
|
current_drive->drive_model[1]='D';
|
|
current_drive->drive_model[2]='-';
|
|
current_drive->drive_model[3]='5';
|
|
current_drive->drive_model[4]='5';
|
|
current_drive->drive_model[5]=0;
|
|
current_drive->drv_type=drv_famT;
|
|
}
|
|
}
|
|
}
|
|
if (!current_drive->drv_type)
|
|
{
|
|
msg(DBG_TEA,"no drive found at address %03X under ID %d.\n",CDo_command,current_drive->drv_id);
|
|
return (-522);
|
|
}
|
|
for (j=0;j<4;j++) current_drive->firmware_version[j]=infobuf[i+j];
|
|
if (famL_drive)
|
|
{
|
|
u_char lcs_firm_e1[]="A E1";
|
|
u_char lcs_firm_f4[]="A4F4";
|
|
|
|
for (j=0;j<4;j++)
|
|
if (current_drive->firmware_version[j]!=lcs_firm_e1[j]) break;
|
|
if (j==4) current_drive->drv_type=drv_e1;
|
|
|
|
for (j=0;j<4;j++)
|
|
if (current_drive->firmware_version[j]!=lcs_firm_f4[j]) break;
|
|
if (j==4) current_drive->drv_type=drv_f4;
|
|
|
|
if (current_drive->drv_type==drv_famL) ask_mail();
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
j=infobuf[4]; /* one-byte version??? - here: 0x15 */
|
|
if (j=='5')
|
|
{
|
|
current_drive->firmware_version[0]=infobuf[7];
|
|
current_drive->firmware_version[1]=infobuf[8];
|
|
current_drive->firmware_version[2]=infobuf[10];
|
|
current_drive->firmware_version[3]=infobuf[11];
|
|
}
|
|
else
|
|
{
|
|
if (j!=0x15) ask_mail();
|
|
current_drive->firmware_version[0]='0';
|
|
current_drive->firmware_version[1]='.';
|
|
current_drive->firmware_version[2]='0'+(j>>4);
|
|
current_drive->firmware_version[3]='0'+(j&0x0f);
|
|
}
|
|
}
|
|
else /* CR-52x, CR-56x, CD200, ECS-AT */
|
|
{
|
|
j = (current_drive->firmware_version[0] & 0x0F) * 100 +
|
|
(current_drive->firmware_version[2] & 0x0F) *10 +
|
|
(current_drive->firmware_version[3] & 0x0F);
|
|
if (fam0_drive)
|
|
{
|
|
if (j<200) current_drive->drv_type=drv_199;
|
|
else if (j<201) current_drive->drv_type=drv_200;
|
|
else if (j<210) current_drive->drv_type=drv_201;
|
|
else if (j<211) current_drive->drv_type=drv_210;
|
|
else if (j<300) current_drive->drv_type=drv_211;
|
|
else if (j>=300) current_drive->drv_type=drv_300;
|
|
}
|
|
else if (fam1_drive)
|
|
{
|
|
if (j<100) current_drive->drv_type=drv_099;
|
|
else
|
|
{
|
|
current_drive->drv_type=drv_100;
|
|
if ((j!=500)&&(j!=102)) ask_mail();
|
|
}
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
if (current_drive->drive_model[5]=='F')
|
|
{
|
|
if ((j!=1)&&(j!=35)&&(j!=200)&&(j!=210))
|
|
ask_mail(); /* unknown version at time */
|
|
}
|
|
else
|
|
{
|
|
msg(DBG_INF,"this CD200 drive is not fully supported yet - only audio will work.\n");
|
|
if ((j!=101)&&(j!=35))
|
|
ask_mail(); /* unknown version at time */
|
|
}
|
|
}
|
|
else if (famV_drive)
|
|
{
|
|
if ((j==100)||(j==150)) current_drive->drv_type=drv_at;
|
|
ask_mail(); /* hopefully we get some feedback by this */
|
|
}
|
|
}
|
|
msg(DBG_LCS,"drive type %02X\n",current_drive->drv_type);
|
|
msg(DBG_INI,"check_version done.\n");
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static void switch_drive(struct sbpcd_drive *p)
|
|
{
|
|
current_drive = p;
|
|
OUT(CDo_enable,current_drive->drv_sel);
|
|
msg(DBG_DID,"drive %d (ID=%d) activated.\n",
|
|
current_drive - D_S, current_drive->drv_id);
|
|
return;
|
|
}
|
|
/*==========================================================================*/
|
|
#ifdef PATH_CHECK
|
|
/*
|
|
* probe for the presence of an interface card
|
|
*/
|
|
static int __init check_card(int port)
|
|
{
|
|
#undef N_RESPO
|
|
#define N_RESPO 20
|
|
int i, j, k;
|
|
u_char response[N_RESPO];
|
|
u_char save_port0;
|
|
u_char save_port3;
|
|
|
|
msg(DBG_INI,"check_card entered.\n");
|
|
save_port0=inb(port+0);
|
|
save_port3=inb(port+3);
|
|
|
|
for (j=0;j<NR_SBPCD;j++)
|
|
{
|
|
OUT(port+3,j) ; /* enable drive #j */
|
|
OUT(port+0,CMD0_PATH_CHECK);
|
|
for (i=10;i>0;i--) OUT(port+0,0);
|
|
for (k=0;k<N_RESPO;k++) response[k]=0;
|
|
for (k=0;k<N_RESPO;k++)
|
|
{
|
|
for (i=10000;i>0;i--)
|
|
{
|
|
if (inb(port+1)&s_not_result_ready) continue;
|
|
response[k]=inb(port+0);
|
|
break;
|
|
}
|
|
}
|
|
for (i=0;i<N_RESPO;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", response[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
|
|
OUT(port+0,CMD0_PATH_CHECK);
|
|
for (i=10;i>0;i--) OUT(port+0,0);
|
|
for (k=0;k<N_RESPO;k++) response[k]=0xFF;
|
|
for (k=0;k<N_RESPO;k++)
|
|
{
|
|
for (i=10000;i>0;i--)
|
|
{
|
|
if (inb(port+1)&s_not_result_ready) continue;
|
|
response[k]=inb(port+0);
|
|
break;
|
|
}
|
|
}
|
|
for (i=0;i<N_RESPO;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", response[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_TEA,"path check 00 (%d): %s\n", j, msgbuf);
|
|
|
|
if (response[0]==0xAA)
|
|
if (response[1]==0x55)
|
|
return (0);
|
|
}
|
|
for (j=0;j<NR_SBPCD;j++)
|
|
{
|
|
OUT(port+3,j) ; /* enable drive #j */
|
|
OUT(port+0,CMD2_READ_VER);
|
|
for (i=10;i>0;i--) OUT(port+0,0);
|
|
for (k=0;k<N_RESPO;k++) response[k]=0;
|
|
for (k=0;k<N_RESPO;k++)
|
|
{
|
|
for (i=1000000;i>0;i--)
|
|
{
|
|
if (inb(port+1)&s_not_result_ready) continue;
|
|
response[k]=inb(port+0);
|
|
break;
|
|
}
|
|
}
|
|
for (i=0;i<N_RESPO;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", response[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
|
|
|
|
OUT(port+0,CMD2_READ_VER);
|
|
for (i=10;i>0;i--) OUT(port+0,0);
|
|
for (k=0;k<N_RESPO;k++) response[k]=0xFF;
|
|
for (k=0;k<N_RESPO;k++)
|
|
{
|
|
for (i=1000000;i>0;i--)
|
|
{
|
|
if (inb(port+1)&s_not_result_ready) continue;
|
|
response[k]=inb(port+0);
|
|
break;
|
|
}
|
|
}
|
|
for (i=0;i<N_RESPO;i++)
|
|
sprintf(&msgbuf[i*3], " %02X", response[i]);
|
|
msgbuf[i*3]=0;
|
|
msg(DBG_TEA,"path check 12 (%d): %s\n", j, msgbuf);
|
|
|
|
if (response[0]==0xAA)
|
|
if (response[1]==0x55)
|
|
return (0);
|
|
}
|
|
OUT(port+0,save_port0);
|
|
OUT(port+3,save_port3);
|
|
return (0); /* in any case - no real "function" at time */
|
|
}
|
|
#endif /* PATH_CHECK */
|
|
/*==========================================================================*/
|
|
/*==========================================================================*/
|
|
/*
|
|
* probe for the presence of drives on the selected controller
|
|
*/
|
|
static int __init check_drives(void)
|
|
{
|
|
int i, j;
|
|
|
|
msg(DBG_INI,"check_drives entered.\n");
|
|
ndrives=0;
|
|
for (j=0;j<max_drives;j++)
|
|
{
|
|
struct sbpcd_drive *p = D_S + ndrives;
|
|
p->drv_id=j;
|
|
if (sbpro_type==1) p->drv_sel=(j&0x01)<<1|(j&0x02)>>1;
|
|
else p->drv_sel=j;
|
|
switch_drive(p);
|
|
msg(DBG_INI,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
|
|
msg(DBG_000,"check_drives: drive %d (ID=%d) activated.\n",ndrives,j);
|
|
i=check_version();
|
|
if (i<0) msg(DBG_INI,"check_version returns %d.\n",i);
|
|
else
|
|
{
|
|
current_drive->drv_options=drv_pattern[j];
|
|
if (fam0L_drive) current_drive->drv_options&=~(speed_auto|speed_300|speed_150);
|
|
msg(DBG_INF, "Drive %d (ID=%d): %.9s (%.4s) at 0x%03X (type %d)\n",
|
|
current_drive - D_S,
|
|
current_drive->drv_id,
|
|
current_drive->drive_model,
|
|
current_drive->firmware_version,
|
|
CDo_command,
|
|
sbpro_type);
|
|
ndrives++;
|
|
}
|
|
}
|
|
for (j=ndrives;j<NR_SBPCD;j++) D_S[j].drv_id=-1;
|
|
if (ndrives==0) return (-1);
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
#ifdef FUTURE
|
|
/*
|
|
* obtain if requested service disturbs current audio state
|
|
*/
|
|
static int obey_audio_state(u_char audio_state, u_char func,u_char subfunc)
|
|
{
|
|
switch (audio_state) /* audio status from controller */
|
|
{
|
|
case aud_11: /* "audio play in progress" */
|
|
case audx11:
|
|
switch (func) /* DOS command code */
|
|
{
|
|
case cmd_07: /* input flush */
|
|
case cmd_0d: /* open device */
|
|
case cmd_0e: /* close device */
|
|
case cmd_0c: /* ioctl output */
|
|
return (1);
|
|
case cmd_03: /* ioctl input */
|
|
switch (subfunc)
|
|
/* DOS ioctl input subfunction */
|
|
{
|
|
case cxi_00:
|
|
case cxi_06:
|
|
case cxi_09:
|
|
return (1);
|
|
default:
|
|
return (ERROR15);
|
|
}
|
|
return (1);
|
|
default:
|
|
return (ERROR15);
|
|
}
|
|
return (1);
|
|
case aud_12: /* "audio play paused" */
|
|
case audx12:
|
|
return (1);
|
|
default:
|
|
return (2);
|
|
}
|
|
}
|
|
/*==========================================================================*/
|
|
/* allowed is only
|
|
* ioctl_o, flush_input, open_device, close_device,
|
|
* tell_address, tell_volume, tell_capabiliti,
|
|
* tell_framesize, tell_CD_changed, tell_audio_posi
|
|
*/
|
|
static int check_allowed1(u_char func1, u_char func2)
|
|
{
|
|
#if 000
|
|
if (func1==ioctl_o) return (0);
|
|
if (func1==read_long) return (-1);
|
|
if (func1==read_long_prefetch) return (-1);
|
|
if (func1==seek) return (-1);
|
|
if (func1==audio_play) return (-1);
|
|
if (func1==audio_pause) return (-1);
|
|
if (func1==audio_resume) return (-1);
|
|
if (func1!=ioctl_i) return (0);
|
|
if (func2==tell_SubQ_run_tot) return (-1);
|
|
if (func2==tell_cdsize) return (-1);
|
|
if (func2==tell_TocDescrip) return (-1);
|
|
if (func2==tell_TocEntry) return (-1);
|
|
if (func2==tell_subQ_info) return (-1);
|
|
if (fam1_drive) if (func2==tell_SubChanInfo) return (-1);
|
|
if (func2==tell_UPC) return (-1);
|
|
#else
|
|
return (0);
|
|
#endif
|
|
}
|
|
/*==========================================================================*/
|
|
static int check_allowed2(u_char func1, u_char func2)
|
|
{
|
|
#if 000
|
|
if (func1==read_long) return (-1);
|
|
if (func1==read_long_prefetch) return (-1);
|
|
if (func1==seek) return (-1);
|
|
if (func1==audio_play) return (-1);
|
|
if (func1!=ioctl_o) return (0);
|
|
if (fam1_drive)
|
|
{
|
|
if (func2==EjectDisk) return (-1);
|
|
if (func2==CloseTray) return (-1);
|
|
}
|
|
#else
|
|
return (0);
|
|
#endif
|
|
}
|
|
/*==========================================================================*/
|
|
static int check_allowed3(u_char func1, u_char func2)
|
|
{
|
|
#if 000
|
|
if (func1==ioctl_i)
|
|
{
|
|
if (func2==tell_address) return (0);
|
|
if (func2==tell_capabiliti) return (0);
|
|
if (func2==tell_CD_changed) return (0);
|
|
if (fam0L_drive) if (func2==tell_SubChanInfo) return (0);
|
|
return (-1);
|
|
}
|
|
if (func1==ioctl_o)
|
|
{
|
|
if (func2==DriveReset) return (0);
|
|
if (fam0L_drive)
|
|
{
|
|
if (func2==EjectDisk) return (0);
|
|
if (func2==LockDoor) return (0);
|
|
if (func2==CloseTray) return (0);
|
|
}
|
|
return (-1);
|
|
}
|
|
if (func1==flush_input) return (-1);
|
|
if (func1==read_long) return (-1);
|
|
if (func1==read_long_prefetch) return (-1);
|
|
if (func1==seek) return (-1);
|
|
if (func1==audio_play) return (-1);
|
|
if (func1==audio_pause) return (-1);
|
|
if (func1==audio_resume) return (-1);
|
|
#else
|
|
return (0);
|
|
#endif
|
|
}
|
|
/*==========================================================================*/
|
|
static int seek_pos_audio_end(void)
|
|
{
|
|
int i;
|
|
|
|
i=msf2blk(current_drive->pos_audio_end)-1;
|
|
if (i<0) return (-1);
|
|
i=cc_Seek(i,0);
|
|
return (i);
|
|
}
|
|
#endif /* FUTURE */
|
|
/*==========================================================================*/
|
|
static int ReadToC(void)
|
|
{
|
|
int i, j;
|
|
current_drive->diskstate_flags &= ~toc_bit;
|
|
current_drive->ored_ctl_adr=0;
|
|
/* special handling of CD-I HE */
|
|
if ((current_drive->n_first_track == 2 && current_drive->n_last_track == 2) ||
|
|
current_drive->xa_byte == 0x10)
|
|
{
|
|
current_drive->TocBuffer[1].nixbyte=0;
|
|
current_drive->TocBuffer[1].ctl_adr=0x40;
|
|
current_drive->TocBuffer[1].number=1;
|
|
current_drive->TocBuffer[1].format=0;
|
|
current_drive->TocBuffer[1].address=blk2msf(0);
|
|
current_drive->ored_ctl_adr |= 0x40;
|
|
current_drive->n_first_track = 1;
|
|
current_drive->n_last_track = 1;
|
|
current_drive->xa_byte = 0x10;
|
|
j = 2;
|
|
} else
|
|
for (j=current_drive->n_first_track;j<=current_drive->n_last_track;j++)
|
|
{
|
|
i=cc_ReadTocEntry(j);
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"cc_ReadTocEntry(%d) returns %d.\n",j,i);
|
|
return (i);
|
|
}
|
|
current_drive->TocBuffer[j].nixbyte=current_drive->TocEnt_nixbyte;
|
|
current_drive->TocBuffer[j].ctl_adr=current_drive->TocEnt_ctl_adr;
|
|
current_drive->TocBuffer[j].number=current_drive->TocEnt_number;
|
|
current_drive->TocBuffer[j].format=current_drive->TocEnt_format;
|
|
current_drive->TocBuffer[j].address=current_drive->TocEnt_address;
|
|
current_drive->ored_ctl_adr |= current_drive->TocEnt_ctl_adr;
|
|
}
|
|
/* fake entry for LeadOut Track */
|
|
current_drive->TocBuffer[j].nixbyte=0;
|
|
current_drive->TocBuffer[j].ctl_adr=0;
|
|
current_drive->TocBuffer[j].number=CDROM_LEADOUT;
|
|
current_drive->TocBuffer[j].format=0;
|
|
current_drive->TocBuffer[j].address=current_drive->size_msf;
|
|
|
|
current_drive->diskstate_flags |= toc_bit;
|
|
return (0);
|
|
}
|
|
/*==========================================================================*/
|
|
static int DiskInfo(void)
|
|
{
|
|
int i, j;
|
|
|
|
current_drive->mode=READ_M1;
|
|
|
|
#undef LOOP_COUNT
|
|
#define LOOP_COUNT 10 /* needed for some "old" drives */
|
|
|
|
msg(DBG_000,"DiskInfo entered.\n");
|
|
for (j=1;j<LOOP_COUNT;j++)
|
|
{
|
|
#if 0
|
|
i=SetSpeed();
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"DiskInfo: SetSpeed returns %d\n", i);
|
|
continue;
|
|
}
|
|
i=cc_ModeSense();
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"DiskInfo: cc_ModeSense returns %d\n", i);
|
|
continue;
|
|
}
|
|
#endif
|
|
i=cc_ReadCapacity();
|
|
if (i>=0) break;
|
|
msg(DBG_INF,"DiskInfo: ReadCapacity #%d returns %d\n", j, i);
|
|
#if 0
|
|
i=cc_DriveReset();
|
|
#endif
|
|
if (!fam0_drive && j == 2) break;
|
|
}
|
|
if (j==LOOP_COUNT) return (-33); /* give up */
|
|
|
|
i=cc_ReadTocDescr();
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"DiskInfo: ReadTocDescr returns %d\n", i);
|
|
return (i);
|
|
}
|
|
i=ReadToC();
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"DiskInfo: ReadToC returns %d\n", i);
|
|
return (i);
|
|
}
|
|
i=cc_CheckMultiSession();
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"DiskInfo: cc_CheckMultiSession returns %d\n", i);
|
|
return (i);
|
|
}
|
|
if (current_drive->f_multisession) current_drive->sbp_bufsiz=1; /* possibly a weird PhotoCD */
|
|
else current_drive->sbp_bufsiz=buffers;
|
|
i=cc_ReadTocEntry(current_drive->n_first_track);
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"DiskInfo: cc_ReadTocEntry(1) returns %d\n", i);
|
|
return (i);
|
|
}
|
|
i=cc_ReadUPC();
|
|
if (i<0) msg(DBG_INF,"DiskInfo: cc_ReadUPC returns %d\n", i);
|
|
if ((fam0L_drive) && (current_drive->xa_byte==0x20 || current_drive->xa_byte == 0x10))
|
|
{
|
|
/* XA disk with old drive */
|
|
cc_ModeSelect(CD_FRAMESIZE_RAW1);
|
|
cc_ModeSense();
|
|
}
|
|
if (famT_drive) cc_prep_mode_T();
|
|
msg(DBG_000,"DiskInfo done.\n");
|
|
return (0);
|
|
}
|
|
|
|
static int sbpcd_drive_status(struct cdrom_device_info *cdi, int slot_nr)
|
|
{
|
|
struct sbpcd_drive *p = cdi->handle;
|
|
int st;
|
|
|
|
if (CDSL_CURRENT != slot_nr) {
|
|
/* we have no changer support */
|
|
return -EINVAL;
|
|
}
|
|
|
|
cc_ReadStatus();
|
|
st=ResponseStatus();
|
|
if (st<0)
|
|
{
|
|
msg(DBG_INF,"sbpcd_drive_status: timeout.\n");
|
|
return (0);
|
|
}
|
|
msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked);
|
|
msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed);
|
|
msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in);
|
|
msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok);
|
|
msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning);
|
|
msg(DBG_000,"Drive Status: busy =%d.\n", st_busy);
|
|
|
|
#if 0
|
|
if (!(p->status_bits & p_door_closed)) return CDS_TRAY_OPEN;
|
|
if (p->status_bits & p_disk_ok) return CDS_DISC_OK;
|
|
if (p->status_bits & p_disk_in) return CDS_DRIVE_NOT_READY;
|
|
|
|
return CDS_NO_DISC;
|
|
#else
|
|
if (p->status_bits & p_spinning) return CDS_DISC_OK;
|
|
/* return CDS_TRAY_OPEN; */
|
|
return CDS_NO_DISC;
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
/*==========================================================================*/
|
|
#ifdef FUTURE
|
|
/*
|
|
* called always if driver gets entered
|
|
* returns 0 or ERROR2 or ERROR15
|
|
*/
|
|
static int prepare(u_char func, u_char subfunc)
|
|
{
|
|
int i;
|
|
|
|
if (fam0L_drive)
|
|
{
|
|
i=inb(CDi_status);
|
|
if (i&s_attention) GetStatus();
|
|
}
|
|
else if (fam1_drive) GetStatus();
|
|
else if (fam2_drive) GetStatus();
|
|
else if (famT_drive) GetStatus();
|
|
if (current_drive->CD_changed==0xFF)
|
|
{
|
|
current_drive->diskstate_flags=0;
|
|
current_drive->audio_state=0;
|
|
if (!st_diskok)
|
|
{
|
|
i=check_allowed1(func,subfunc);
|
|
if (i<0) return (-2);
|
|
}
|
|
else
|
|
{
|
|
i=check_allowed3(func,subfunc);
|
|
if (i<0)
|
|
{
|
|
current_drive->CD_changed=1;
|
|
return (-15);
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (!st_diskok)
|
|
{
|
|
current_drive->diskstate_flags=0;
|
|
current_drive->audio_state=0;
|
|
i=check_allowed1(func,subfunc);
|
|
if (i<0) return (-2);
|
|
}
|
|
else
|
|
{
|
|
if (st_busy)
|
|
{
|
|
if (current_drive->audio_state!=audio_pausing)
|
|
{
|
|
i=check_allowed2(func,subfunc);
|
|
if (i<0) return (-2);
|
|
}
|
|
}
|
|
else
|
|
{
|
|
if (current_drive->audio_state==audio_playing) seek_pos_audio_end();
|
|
current_drive->audio_state=0;
|
|
}
|
|
if (!frame_size_valid)
|
|
{
|
|
i=DiskInfo();
|
|
if (i<0)
|
|
{
|
|
current_drive->diskstate_flags=0;
|
|
current_drive->audio_state=0;
|
|
i=check_allowed1(func,subfunc);
|
|
if (i<0) return (-2);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
#endif /* FUTURE */
|
|
/*==========================================================================*/
|
|
/*==========================================================================*/
|
|
/*
|
|
* Check the results of the "get status" command.
|
|
*/
|
|
static int sbp_status(void)
|
|
{
|
|
int st;
|
|
|
|
st=ResponseStatus();
|
|
if (st<0)
|
|
{
|
|
msg(DBG_INF,"sbp_status: timeout.\n");
|
|
return (0);
|
|
}
|
|
|
|
if (!st_spinning) msg(DBG_SPI,"motor got off - ignoring.\n");
|
|
|
|
if (st_check)
|
|
{
|
|
msg(DBG_INF,"st_check detected - retrying.\n");
|
|
return (0);
|
|
}
|
|
if (!st_door_closed)
|
|
{
|
|
msg(DBG_INF,"door is open - retrying.\n");
|
|
return (0);
|
|
}
|
|
if (!st_caddy_in)
|
|
{
|
|
msg(DBG_INF,"disk removed - retrying.\n");
|
|
return (0);
|
|
}
|
|
if (!st_diskok)
|
|
{
|
|
msg(DBG_INF,"!st_diskok detected - retrying.\n");
|
|
return (0);
|
|
}
|
|
if (st_busy)
|
|
{
|
|
msg(DBG_INF,"st_busy detected - retrying.\n");
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
/*==========================================================================*/
|
|
|
|
static int sbpcd_get_last_session(struct cdrom_device_info *cdi, struct cdrom_multisession *ms_infp)
|
|
{
|
|
struct sbpcd_drive *p = cdi->handle;
|
|
ms_infp->addr_format = CDROM_LBA;
|
|
ms_infp->addr.lba = p->lba_multi;
|
|
if (p->f_multisession)
|
|
ms_infp->xa_flag=1; /* valid redirection address */
|
|
else
|
|
ms_infp->xa_flag=0; /* invalid redirection address */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*==========================================================================*/
|
|
/*==========================================================================*/
|
|
/*
|
|
* ioctl support
|
|
*/
|
|
static int sbpcd_dev_ioctl(struct cdrom_device_info *cdi, u_int cmd,
|
|
u_long arg)
|
|
{
|
|
struct sbpcd_drive *p = cdi->handle;
|
|
int i;
|
|
|
|
msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08lX)\n", cdi->name, cmd, arg);
|
|
if (p->drv_id==-1) {
|
|
msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name);
|
|
return (-ENXIO); /* no such drive */
|
|
}
|
|
down(&ioctl_read_sem);
|
|
if (p != current_drive)
|
|
switch_drive(p);
|
|
|
|
msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd);
|
|
switch (cmd) /* Sun-compatible */
|
|
{
|
|
case DDIOCSDBG: /* DDI Debug */
|
|
if (!capable(CAP_SYS_ADMIN)) RETURN_UP(-EPERM);
|
|
i=sbpcd_dbg_ioctl(arg,1);
|
|
RETURN_UP(i);
|
|
case CDROMRESET: /* hard reset the drive */
|
|
msg(DBG_IOC,"ioctl: CDROMRESET entered.\n");
|
|
i=DriveReset();
|
|
current_drive->audio_state=0;
|
|
RETURN_UP(i);
|
|
|
|
case CDROMREADMODE1:
|
|
msg(DBG_IOC,"ioctl: CDROMREADMODE1 requested.\n");
|
|
#ifdef SAFE_MIXED
|
|
if (current_drive->has_data>1) RETURN_UP(-EBUSY);
|
|
#endif /* SAFE_MIXED */
|
|
cc_ModeSelect(CD_FRAMESIZE);
|
|
cc_ModeSense();
|
|
current_drive->mode=READ_M1;
|
|
RETURN_UP(0);
|
|
|
|
case CDROMREADMODE2: /* not usable at the moment */
|
|
msg(DBG_IOC,"ioctl: CDROMREADMODE2 requested.\n");
|
|
#ifdef SAFE_MIXED
|
|
if (current_drive->has_data>1) RETURN_UP(-EBUSY);
|
|
#endif /* SAFE_MIXED */
|
|
cc_ModeSelect(CD_FRAMESIZE_RAW1);
|
|
cc_ModeSense();
|
|
current_drive->mode=READ_M2;
|
|
RETURN_UP(0);
|
|
|
|
case CDROMAUDIOBUFSIZ: /* configure the audio buffer size */
|
|
msg(DBG_IOC,"ioctl: CDROMAUDIOBUFSIZ entered.\n");
|
|
if (current_drive->sbp_audsiz>0) vfree(current_drive->aud_buf);
|
|
current_drive->aud_buf=NULL;
|
|
current_drive->sbp_audsiz=arg;
|
|
|
|
if (current_drive->sbp_audsiz>16)
|
|
{
|
|
current_drive->sbp_audsiz = 0;
|
|
RETURN_UP(current_drive->sbp_audsiz);
|
|
}
|
|
|
|
if (current_drive->sbp_audsiz>0)
|
|
{
|
|
current_drive->aud_buf=(u_char *) vmalloc(current_drive->sbp_audsiz*CD_FRAMESIZE_RAW);
|
|
if (current_drive->aud_buf==NULL)
|
|
{
|
|
msg(DBG_INF,"audio buffer (%d frames) not available.\n",current_drive->sbp_audsiz);
|
|
current_drive->sbp_audsiz=0;
|
|
}
|
|
else msg(DBG_INF,"audio buffer size: %d frames.\n",current_drive->sbp_audsiz);
|
|
}
|
|
RETURN_UP(current_drive->sbp_audsiz);
|
|
|
|
case CDROMREADAUDIO:
|
|
{ /* start of CDROMREADAUDIO */
|
|
int i=0, j=0, frame, block=0;
|
|
u_int try=0;
|
|
u_long timeout;
|
|
u_char *p;
|
|
u_int data_tries = 0;
|
|
u_int data_waits = 0;
|
|
u_int data_retrying = 0;
|
|
int status_tries;
|
|
int error_flag;
|
|
|
|
msg(DBG_IOC,"ioctl: CDROMREADAUDIO entered.\n");
|
|
if (fam0_drive) RETURN_UP(-EINVAL);
|
|
if (famL_drive) RETURN_UP(-EINVAL);
|
|
if (famV_drive) RETURN_UP(-EINVAL);
|
|
if (famT_drive) RETURN_UP(-EINVAL);
|
|
#ifdef SAFE_MIXED
|
|
if (current_drive->has_data>1) RETURN_UP(-EBUSY);
|
|
#endif /* SAFE_MIXED */
|
|
if (current_drive->aud_buf==NULL) RETURN_UP(-EINVAL);
|
|
if (copy_from_user(&read_audio, (void __user *)arg,
|
|
sizeof(struct cdrom_read_audio)))
|
|
RETURN_UP(-EFAULT);
|
|
if (read_audio.nframes < 0 || read_audio.nframes>current_drive->sbp_audsiz) RETURN_UP(-EINVAL);
|
|
if (!access_ok(VERIFY_WRITE, read_audio.buf,
|
|
read_audio.nframes*CD_FRAMESIZE_RAW))
|
|
RETURN_UP(-EFAULT);
|
|
|
|
if (read_audio.addr_format==CDROM_MSF) /* MSF-bin specification of where to start */
|
|
block=msf2lba(&read_audio.addr.msf.minute);
|
|
else if (read_audio.addr_format==CDROM_LBA) /* lba specification of where to start */
|
|
block=read_audio.addr.lba;
|
|
else RETURN_UP(-EINVAL);
|
|
#if 000
|
|
i=cc_SetSpeed(speed_150,0,0);
|
|
if (i) msg(DBG_AUD,"read_audio: SetSpeed error %d\n", i);
|
|
#endif
|
|
msg(DBG_AUD,"read_audio: lba: %d, msf: %06X\n",
|
|
block, blk2msf(block));
|
|
msg(DBG_AUD,"read_audio: before cc_ReadStatus.\n");
|
|
#if OLD_BUSY
|
|
while (busy_data) sbp_sleep(HZ/10); /* wait a bit */
|
|
busy_audio=1;
|
|
#endif /* OLD_BUSY */
|
|
error_flag=0;
|
|
for (data_tries=5; data_tries>0; data_tries--)
|
|
{
|
|
msg(DBG_AUD,"data_tries=%d ...\n", data_tries);
|
|
current_drive->mode=READ_AU;
|
|
cc_ModeSelect(CD_FRAMESIZE_RAW);
|
|
cc_ModeSense();
|
|
for (status_tries=3; status_tries > 0; status_tries--)
|
|
{
|
|
flags_cmd_out |= f_respo3;
|
|
cc_ReadStatus();
|
|
if (sbp_status() != 0) break;
|
|
if (st_check) cc_ReadError();
|
|
sbp_sleep(1); /* wait a bit, try again */
|
|
}
|
|
if (status_tries == 0)
|
|
{
|
|
msg(DBG_AUD,"read_audio: sbp_status: failed after 3 tries in line %d.\n", __LINE__);
|
|
continue;
|
|
}
|
|
msg(DBG_AUD,"read_audio: sbp_status: ok.\n");
|
|
|
|
flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
|
|
if (fam0L_drive)
|
|
{
|
|
flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
|
|
cmd_type=READ_M2;
|
|
drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
|
|
drvcmd[1]=(block>>16)&0x000000ff;
|
|
drvcmd[2]=(block>>8)&0x000000ff;
|
|
drvcmd[3]=block&0x000000ff;
|
|
drvcmd[4]=0;
|
|
drvcmd[5]=read_audio.nframes; /* # of frames */
|
|
drvcmd[6]=0;
|
|
}
|
|
else if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_READ; /* "read frames", new drives */
|
|
lba2msf(block,&drvcmd[1]); /* msf-bin format required */
|
|
drvcmd[4]=0;
|
|
drvcmd[5]=0;
|
|
drvcmd[6]=read_audio.nframes; /* # of frames */
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_READ_XA2;
|
|
lba2msf(block,&drvcmd[1]); /* msf-bin format required */
|
|
drvcmd[4]=0;
|
|
drvcmd[5]=read_audio.nframes; /* # of frames */
|
|
drvcmd[6]=0x11; /* raw mode */
|
|
}
|
|
else if (famT_drive) /* CD-55A: not tested yet */
|
|
{
|
|
}
|
|
msg(DBG_AUD,"read_audio: before giving \"read\" command.\n");
|
|
flags_cmd_out=f_putcmd;
|
|
response_count=0;
|
|
i=cmd_out();
|
|
if (i<0) msg(DBG_INF,"error giving READ AUDIO command: %0d\n", i);
|
|
sbp_sleep(0);
|
|
msg(DBG_AUD,"read_audio: after giving \"read\" command.\n");
|
|
for (frame=1;frame<2 && !error_flag; frame++)
|
|
{
|
|
try=maxtim_data;
|
|
for (timeout=jiffies+9*HZ; ; )
|
|
{
|
|
for ( ; try!=0;try--)
|
|
{
|
|
j=inb(CDi_status);
|
|
if (!(j&s_not_data_ready)) break;
|
|
if (!(j&s_not_result_ready)) break;
|
|
if (fam0L_drive) if (j&s_attention) break;
|
|
}
|
|
if (try != 0 || time_after_eq(jiffies, timeout)) break;
|
|
if (data_retrying == 0) data_waits++;
|
|
data_retrying = 1;
|
|
sbp_sleep(1);
|
|
try = 1;
|
|
}
|
|
if (try==0)
|
|
{
|
|
msg(DBG_INF,"read_audio: sbp_data: CDi_status timeout.\n");
|
|
error_flag++;
|
|
break;
|
|
}
|
|
msg(DBG_AUD,"read_audio: sbp_data: CDi_status ok.\n");
|
|
if (j&s_not_data_ready)
|
|
{
|
|
msg(DBG_INF, "read_audio: sbp_data: DATA_READY timeout.\n");
|
|
error_flag++;
|
|
break;
|
|
}
|
|
msg(DBG_AUD,"read_audio: before reading data.\n");
|
|
error_flag=0;
|
|
p = current_drive->aud_buf;
|
|
if (sbpro_type==1) OUT(CDo_sel_i_d,1);
|
|
if (do_16bit)
|
|
{
|
|
u_short *p2 = (u_short *) p;
|
|
|
|
for (; (u_char *) p2 < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;)
|
|
{
|
|
if ((inb_p(CDi_status)&s_not_data_ready)) continue;
|
|
|
|
/* get one sample */
|
|
*p2++ = inw_p(CDi_data);
|
|
*p2++ = inw_p(CDi_data);
|
|
}
|
|
} else {
|
|
for (; p < current_drive->aud_buf + read_audio.nframes*CD_FRAMESIZE_RAW;)
|
|
{
|
|
if ((inb_p(CDi_status)&s_not_data_ready)) continue;
|
|
|
|
/* get one sample */
|
|
*p++ = inb_p(CDi_data);
|
|
*p++ = inb_p(CDi_data);
|
|
*p++ = inb_p(CDi_data);
|
|
*p++ = inb_p(CDi_data);
|
|
}
|
|
}
|
|
if (sbpro_type==1) OUT(CDo_sel_i_d,0);
|
|
data_retrying = 0;
|
|
}
|
|
msg(DBG_AUD,"read_audio: after reading data.\n");
|
|
if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
|
|
{
|
|
msg(DBG_AUD,"read_audio: read aborted by drive\n");
|
|
#if 0000
|
|
i=cc_DriveReset(); /* ugly fix to prevent a hang */
|
|
#else
|
|
i=cc_ReadError();
|
|
#endif
|
|
continue;
|
|
}
|
|
if (fam0L_drive)
|
|
{
|
|
i=maxtim_data;
|
|
for (timeout=jiffies+9*HZ; time_before(jiffies, timeout); timeout--)
|
|
{
|
|
for ( ;i!=0;i--)
|
|
{
|
|
j=inb(CDi_status);
|
|
if (!(j&s_not_data_ready)) break;
|
|
if (!(j&s_not_result_ready)) break;
|
|
if (j&s_attention) break;
|
|
}
|
|
if (i != 0 || time_after_eq(jiffies, timeout)) break;
|
|
sbp_sleep(0);
|
|
i = 1;
|
|
}
|
|
if (i==0) msg(DBG_AUD,"read_audio: STATUS TIMEOUT AFTER READ");
|
|
if (!(j&s_attention))
|
|
{
|
|
msg(DBG_AUD,"read_audio: sbp_data: timeout waiting DRV_ATTN - retrying\n");
|
|
i=cc_DriveReset(); /* ugly fix to prevent a hang */
|
|
continue;
|
|
}
|
|
}
|
|
do
|
|
{
|
|
if (fam0L_drive) cc_ReadStatus();
|
|
i=ResponseStatus(); /* builds status_bits, returns orig. status (old) or faked p_success (new) */
|
|
if (i<0) { msg(DBG_AUD,
|
|
"read_audio: cc_ReadStatus error after read: %02X\n",
|
|
current_drive->status_bits);
|
|
continue; /* FIXME */
|
|
}
|
|
}
|
|
while ((fam0L_drive)&&(!st_check)&&(!(i&p_success)));
|
|
if (st_check)
|
|
{
|
|
i=cc_ReadError();
|
|
msg(DBG_AUD,"read_audio: cc_ReadError was necessary after read: %02X\n",i);
|
|
continue;
|
|
}
|
|
if (copy_to_user(read_audio.buf,
|
|
current_drive->aud_buf,
|
|
read_audio.nframes * CD_FRAMESIZE_RAW))
|
|
RETURN_UP(-EFAULT);
|
|
msg(DBG_AUD,"read_audio: copy_to_user done.\n");
|
|
break;
|
|
}
|
|
cc_ModeSelect(CD_FRAMESIZE);
|
|
cc_ModeSense();
|
|
current_drive->mode=READ_M1;
|
|
#if OLD_BUSY
|
|
busy_audio=0;
|
|
#endif /* OLD_BUSY */
|
|
if (data_tries == 0)
|
|
{
|
|
msg(DBG_AUD,"read_audio: failed after 5 tries in line %d.\n", __LINE__);
|
|
RETURN_UP(-EIO);
|
|
}
|
|
msg(DBG_AUD,"read_audio: successful return.\n");
|
|
RETURN_UP(0);
|
|
} /* end of CDROMREADAUDIO */
|
|
|
|
default:
|
|
msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
|
|
RETURN_UP(-EINVAL);
|
|
} /* end switch(cmd) */
|
|
}
|
|
|
|
static int sbpcd_audio_ioctl(struct cdrom_device_info *cdi, u_int cmd,
|
|
void * arg)
|
|
{
|
|
struct sbpcd_drive *p = cdi->handle;
|
|
int i, st, j;
|
|
|
|
msg(DBG_IO2,"ioctl(%s, 0x%08lX, 0x%08p)\n", cdi->name, cmd, arg);
|
|
if (p->drv_id==-1) {
|
|
msg(DBG_INF, "ioctl: bad device: %s\n", cdi->name);
|
|
return (-ENXIO); /* no such drive */
|
|
}
|
|
down(&ioctl_read_sem);
|
|
if (p != current_drive)
|
|
switch_drive(p);
|
|
|
|
msg(DBG_IO2,"ioctl: device %s, request %04X\n",cdi->name,cmd);
|
|
switch (cmd) /* Sun-compatible */
|
|
{
|
|
|
|
case CDROMPAUSE: /* Pause the drive */
|
|
msg(DBG_IOC,"ioctl: CDROMPAUSE entered.\n");
|
|
/* pause the drive unit when it is currently in PLAY mode, */
|
|
/* or reset the starting and ending locations when in PAUSED mode. */
|
|
/* If applicable, at the next stopping point it reaches */
|
|
/* the drive will discontinue playing. */
|
|
switch (current_drive->audio_state)
|
|
{
|
|
case audio_playing:
|
|
if (famL_drive) i=cc_ReadSubQ();
|
|
else i=cc_Pause_Resume(1);
|
|
if (i<0) RETURN_UP(-EIO);
|
|
if (famL_drive) i=cc_Pause_Resume(1);
|
|
else i=cc_ReadSubQ();
|
|
if (i<0) RETURN_UP(-EIO);
|
|
current_drive->pos_audio_start=current_drive->SubQ_run_tot;
|
|
current_drive->audio_state=audio_pausing;
|
|
RETURN_UP(0);
|
|
case audio_pausing:
|
|
i=cc_Seek(current_drive->pos_audio_start,1);
|
|
if (i<0) RETURN_UP(-EIO);
|
|
RETURN_UP(0);
|
|
default:
|
|
RETURN_UP(-EINVAL);
|
|
}
|
|
|
|
case CDROMRESUME: /* resume paused audio play */
|
|
msg(DBG_IOC,"ioctl: CDROMRESUME entered.\n");
|
|
/* resume playing audio tracks when a previous PLAY AUDIO call has */
|
|
/* been paused with a PAUSE command. */
|
|
/* It will resume playing from the location saved in SubQ_run_tot. */
|
|
if (current_drive->audio_state!=audio_pausing) RETURN_UP(-EINVAL);
|
|
if (famL_drive)
|
|
i=cc_PlayAudio(current_drive->pos_audio_start,
|
|
current_drive->pos_audio_end);
|
|
else i=cc_Pause_Resume(3);
|
|
if (i<0) RETURN_UP(-EIO);
|
|
current_drive->audio_state=audio_playing;
|
|
RETURN_UP(0);
|
|
|
|
case CDROMPLAYMSF:
|
|
msg(DBG_IOC,"ioctl: CDROMPLAYMSF entered.\n");
|
|
#ifdef SAFE_MIXED
|
|
if (current_drive->has_data>1) RETURN_UP(-EBUSY);
|
|
#endif /* SAFE_MIXED */
|
|
if (current_drive->audio_state==audio_playing)
|
|
{
|
|
i=cc_Pause_Resume(1);
|
|
if (i<0) RETURN_UP(-EIO);
|
|
i=cc_ReadSubQ();
|
|
if (i<0) RETURN_UP(-EIO);
|
|
current_drive->pos_audio_start=current_drive->SubQ_run_tot;
|
|
i=cc_Seek(current_drive->pos_audio_start,1);
|
|
}
|
|
memcpy(&msf, (void *) arg, sizeof(struct cdrom_msf));
|
|
/* values come as msf-bin */
|
|
current_drive->pos_audio_start = (msf.cdmsf_min0<<16) |
|
|
(msf.cdmsf_sec0<<8) |
|
|
msf.cdmsf_frame0;
|
|
current_drive->pos_audio_end = (msf.cdmsf_min1<<16) |
|
|
(msf.cdmsf_sec1<<8) |
|
|
msf.cdmsf_frame1;
|
|
msg(DBG_IOX,"ioctl: CDROMPLAYMSF %08X %08X\n",
|
|
current_drive->pos_audio_start,current_drive->pos_audio_end);
|
|
i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end);
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i);
|
|
DriveReset();
|
|
current_drive->audio_state=0;
|
|
RETURN_UP(-EIO);
|
|
}
|
|
current_drive->audio_state=audio_playing;
|
|
RETURN_UP(0);
|
|
|
|
case CDROMPLAYTRKIND: /* Play a track. This currently ignores index. */
|
|
msg(DBG_IOC,"ioctl: CDROMPLAYTRKIND entered.\n");
|
|
#ifdef SAFE_MIXED
|
|
if (current_drive->has_data>1) RETURN_UP(-EBUSY);
|
|
#endif /* SAFE_MIXED */
|
|
if (current_drive->audio_state==audio_playing)
|
|
{
|
|
msg(DBG_IOX,"CDROMPLAYTRKIND: already audio_playing.\n");
|
|
#if 1
|
|
RETURN_UP(0); /* just let us play on */
|
|
#else
|
|
RETURN_UP(-EINVAL); /* play on, but say "error" */
|
|
#endif
|
|
}
|
|
memcpy(&ti,(void *) arg,sizeof(struct cdrom_ti));
|
|
msg(DBG_IOX,"ioctl: trk0: %d, ind0: %d, trk1:%d, ind1:%d\n",
|
|
ti.cdti_trk0,ti.cdti_ind0,ti.cdti_trk1,ti.cdti_ind1);
|
|
if (ti.cdti_trk0<current_drive->n_first_track) RETURN_UP(-EINVAL);
|
|
if (ti.cdti_trk0>current_drive->n_last_track) RETURN_UP(-EINVAL);
|
|
if (ti.cdti_trk1<ti.cdti_trk0) ti.cdti_trk1=ti.cdti_trk0;
|
|
if (ti.cdti_trk1>current_drive->n_last_track) ti.cdti_trk1=current_drive->n_last_track;
|
|
current_drive->pos_audio_start=current_drive->TocBuffer[ti.cdti_trk0].address;
|
|
current_drive->pos_audio_end=current_drive->TocBuffer[ti.cdti_trk1+1].address;
|
|
i=cc_PlayAudio(current_drive->pos_audio_start,current_drive->pos_audio_end);
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"ioctl: cc_PlayAudio returns %d\n",i);
|
|
DriveReset();
|
|
current_drive->audio_state=0;
|
|
RETURN_UP(-EIO);
|
|
}
|
|
current_drive->audio_state=audio_playing;
|
|
RETURN_UP(0);
|
|
|
|
case CDROMREADTOCHDR: /* Read the table of contents header */
|
|
msg(DBG_IOC,"ioctl: CDROMREADTOCHDR entered.\n");
|
|
tochdr.cdth_trk0=current_drive->n_first_track;
|
|
tochdr.cdth_trk1=current_drive->n_last_track;
|
|
memcpy((void *) arg, &tochdr, sizeof(struct cdrom_tochdr));
|
|
RETURN_UP(0);
|
|
|
|
case CDROMREADTOCENTRY: /* Read an entry in the table of contents */
|
|
msg(DBG_IOC,"ioctl: CDROMREADTOCENTRY entered.\n");
|
|
memcpy(&tocentry, (void *) arg, sizeof(struct cdrom_tocentry));
|
|
i=tocentry.cdte_track;
|
|
if (i==CDROM_LEADOUT) i=current_drive->n_last_track+1;
|
|
else if (i<current_drive->n_first_track||i>current_drive->n_last_track)
|
|
RETURN_UP(-EINVAL);
|
|
tocentry.cdte_adr=current_drive->TocBuffer[i].ctl_adr&0x0F;
|
|
tocentry.cdte_ctrl=(current_drive->TocBuffer[i].ctl_adr>>4)&0x0F;
|
|
tocentry.cdte_datamode=current_drive->TocBuffer[i].format;
|
|
if (tocentry.cdte_format==CDROM_MSF) /* MSF-bin required */
|
|
{
|
|
tocentry.cdte_addr.msf.minute=(current_drive->TocBuffer[i].address>>16)&0x00FF;
|
|
tocentry.cdte_addr.msf.second=(current_drive->TocBuffer[i].address>>8)&0x00FF;
|
|
tocentry.cdte_addr.msf.frame=current_drive->TocBuffer[i].address&0x00FF;
|
|
}
|
|
else if (tocentry.cdte_format==CDROM_LBA) /* blk required */
|
|
tocentry.cdte_addr.lba=msf2blk(current_drive->TocBuffer[i].address);
|
|
else RETURN_UP(-EINVAL);
|
|
memcpy((void *) arg, &tocentry, sizeof(struct cdrom_tocentry));
|
|
RETURN_UP(0);
|
|
|
|
case CDROMSTOP: /* Spin down the drive */
|
|
msg(DBG_IOC,"ioctl: CDROMSTOP entered.\n");
|
|
#ifdef SAFE_MIXED
|
|
if (current_drive->has_data>1) RETURN_UP(-EBUSY);
|
|
#endif /* SAFE_MIXED */
|
|
i=cc_Pause_Resume(1);
|
|
current_drive->audio_state=0;
|
|
#if 0
|
|
cc_DriveReset();
|
|
#endif
|
|
RETURN_UP(i);
|
|
|
|
case CDROMSTART: /* Spin up the drive */
|
|
msg(DBG_IOC,"ioctl: CDROMSTART entered.\n");
|
|
cc_SpinUp();
|
|
current_drive->audio_state=0;
|
|
RETURN_UP(0);
|
|
|
|
case CDROMVOLCTRL: /* Volume control */
|
|
msg(DBG_IOC,"ioctl: CDROMVOLCTRL entered.\n");
|
|
memcpy(&volctrl,(char *) arg,sizeof(volctrl));
|
|
current_drive->vol_chan0=0;
|
|
current_drive->vol_ctrl0=volctrl.channel0;
|
|
current_drive->vol_chan1=1;
|
|
current_drive->vol_ctrl1=volctrl.channel1;
|
|
i=cc_SetVolume();
|
|
RETURN_UP(0);
|
|
|
|
case CDROMVOLREAD: /* read Volume settings from drive */
|
|
msg(DBG_IOC,"ioctl: CDROMVOLREAD entered.\n");
|
|
st=cc_GetVolume();
|
|
if (st<0) RETURN_UP(st);
|
|
volctrl.channel0=current_drive->vol_ctrl0;
|
|
volctrl.channel1=current_drive->vol_ctrl1;
|
|
volctrl.channel2=0;
|
|
volctrl.channel2=0;
|
|
memcpy((void *)arg,&volctrl,sizeof(volctrl));
|
|
RETURN_UP(0);
|
|
|
|
case CDROMSUBCHNL: /* Get subchannel info */
|
|
msg(DBG_IOS,"ioctl: CDROMSUBCHNL entered.\n");
|
|
/* Bogus, I can do better than this! --AJK
|
|
if ((st_spinning)||(!subq_valid)) {
|
|
i=cc_ReadSubQ();
|
|
if (i<0) RETURN_UP(-EIO);
|
|
}
|
|
*/
|
|
i=cc_ReadSubQ();
|
|
if (i<0) {
|
|
j=cc_ReadError(); /* clear out error status from drive */
|
|
current_drive->audio_state=CDROM_AUDIO_NO_STATUS;
|
|
/* get and set the disk state here,
|
|
probably not the right place, but who cares!
|
|
It makes it work properly! --AJK */
|
|
if (current_drive->CD_changed==0xFF) {
|
|
msg(DBG_000,"Disk changed detect\n");
|
|
current_drive->diskstate_flags &= ~cd_size_bit;
|
|
}
|
|
RETURN_UP(-EIO);
|
|
}
|
|
if (current_drive->CD_changed==0xFF) {
|
|
/* reread the TOC because the disk has changed! --AJK */
|
|
msg(DBG_000,"Disk changed STILL detected, rereading TOC!\n");
|
|
i=DiskInfo();
|
|
if(i==0) {
|
|
current_drive->CD_changed=0x00; /* cd has changed, procede, */
|
|
RETURN_UP(-EIO); /* and get TOC, etc on next try! --AJK */
|
|
} else {
|
|
RETURN_UP(-EIO); /* we weren't ready yet! --AJK */
|
|
}
|
|
}
|
|
memcpy(&SC, (void *) arg, sizeof(struct cdrom_subchnl));
|
|
/*
|
|
This virtual crap is very bogus!
|
|
It doesn't detect when the cd is done playing audio!
|
|
Lets do this right with proper hardware register reading!
|
|
*/
|
|
cc_ReadStatus();
|
|
i=ResponseStatus();
|
|
msg(DBG_000,"Drive Status: door_locked =%d.\n", st_door_locked);
|
|
msg(DBG_000,"Drive Status: door_closed =%d.\n", st_door_closed);
|
|
msg(DBG_000,"Drive Status: caddy_in =%d.\n", st_caddy_in);
|
|
msg(DBG_000,"Drive Status: disk_ok =%d.\n", st_diskok);
|
|
msg(DBG_000,"Drive Status: spinning =%d.\n", st_spinning);
|
|
msg(DBG_000,"Drive Status: busy =%d.\n", st_busy);
|
|
/* st_busy indicates if it's _ACTUALLY_ playing audio */
|
|
switch (current_drive->audio_state)
|
|
{
|
|
case audio_playing:
|
|
if(st_busy==0) {
|
|
/* CD has stopped playing audio --AJK */
|
|
current_drive->audio_state=audio_completed;
|
|
SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED;
|
|
} else {
|
|
SC.cdsc_audiostatus=CDROM_AUDIO_PLAY;
|
|
}
|
|
break;
|
|
case audio_pausing:
|
|
SC.cdsc_audiostatus=CDROM_AUDIO_PAUSED;
|
|
break;
|
|
case audio_completed:
|
|
SC.cdsc_audiostatus=CDROM_AUDIO_COMPLETED;
|
|
break;
|
|
default:
|
|
SC.cdsc_audiostatus=CDROM_AUDIO_NO_STATUS;
|
|
break;
|
|
}
|
|
SC.cdsc_adr=current_drive->SubQ_ctl_adr;
|
|
SC.cdsc_ctrl=current_drive->SubQ_ctl_adr>>4;
|
|
SC.cdsc_trk=bcd2bin(current_drive->SubQ_trk);
|
|
SC.cdsc_ind=bcd2bin(current_drive->SubQ_pnt_idx);
|
|
if (SC.cdsc_format==CDROM_LBA)
|
|
{
|
|
SC.cdsc_absaddr.lba=msf2blk(current_drive->SubQ_run_tot);
|
|
SC.cdsc_reladdr.lba=msf2blk(current_drive->SubQ_run_trk);
|
|
}
|
|
else /* not only if (SC.cdsc_format==CDROM_MSF) */
|
|
{
|
|
SC.cdsc_absaddr.msf.minute=(current_drive->SubQ_run_tot>>16)&0x00FF;
|
|
SC.cdsc_absaddr.msf.second=(current_drive->SubQ_run_tot>>8)&0x00FF;
|
|
SC.cdsc_absaddr.msf.frame=current_drive->SubQ_run_tot&0x00FF;
|
|
SC.cdsc_reladdr.msf.minute=(current_drive->SubQ_run_trk>>16)&0x00FF;
|
|
SC.cdsc_reladdr.msf.second=(current_drive->SubQ_run_trk>>8)&0x00FF;
|
|
SC.cdsc_reladdr.msf.frame=current_drive->SubQ_run_trk&0x00FF;
|
|
}
|
|
memcpy((void *) arg, &SC, sizeof(struct cdrom_subchnl));
|
|
msg(DBG_IOS,"CDROMSUBCHNL: %1X %02X %08X %08X %02X %02X %06X %06X\n",
|
|
SC.cdsc_format,SC.cdsc_audiostatus,
|
|
SC.cdsc_adr,SC.cdsc_ctrl,
|
|
SC.cdsc_trk,SC.cdsc_ind,
|
|
SC.cdsc_absaddr,SC.cdsc_reladdr);
|
|
RETURN_UP(0);
|
|
|
|
default:
|
|
msg(DBG_IOC,"ioctl: unknown function request %04X\n", cmd);
|
|
RETURN_UP(-EINVAL);
|
|
} /* end switch(cmd) */
|
|
}
|
|
/*==========================================================================*/
|
|
/*
|
|
* Take care of the different block sizes between cdrom and Linux.
|
|
*/
|
|
static void sbp_transfer(struct request *req)
|
|
{
|
|
long offs;
|
|
|
|
while ( (req->nr_sectors > 0) &&
|
|
(req->sector/4 >= current_drive->sbp_first_frame) &&
|
|
(req->sector/4 <= current_drive->sbp_last_frame) )
|
|
{
|
|
offs = (req->sector - current_drive->sbp_first_frame * 4) * 512;
|
|
memcpy(req->buffer, current_drive->sbp_buf + offs, 512);
|
|
req->nr_sectors--;
|
|
req->sector++;
|
|
req->buffer += 512;
|
|
}
|
|
}
|
|
/*==========================================================================*/
|
|
/*
|
|
* special end_request for sbpcd to solve CURRENT==NULL bug. (GTL)
|
|
* GTL = Gonzalo Tornaria <tornaria@cmat.edu.uy>
|
|
*
|
|
* This is a kludge so we don't need to modify end_request.
|
|
* We put the req we take out after INIT_REQUEST in the requests list,
|
|
* so that end_request will discard it.
|
|
*
|
|
* The bug could be present in other block devices, perhaps we
|
|
* should modify INIT_REQUEST and end_request instead, and
|
|
* change every block device..
|
|
*
|
|
* Could be a race here?? Could e.g. a timer interrupt schedule() us?
|
|
* If so, we should copy end_request here, and do it right.. (or
|
|
* modify end_request and the block devices).
|
|
*
|
|
* In any case, the race here would be much small than it was, and
|
|
* I couldn't reproduce..
|
|
*
|
|
* The race could be: suppose CURRENT==NULL. We put our req in the list,
|
|
* and we are scheduled. Other process takes over, and gets into
|
|
* do_sbpcd_request. It sees CURRENT!=NULL (it is == to our req), so
|
|
* proceeds. It ends, so CURRENT is now NULL.. Now we awake somewhere in
|
|
* end_request, but now CURRENT==NULL... oops!
|
|
*
|
|
*/
|
|
#undef DEBUG_GTL
|
|
|
|
/*==========================================================================*/
|
|
/*
|
|
* I/O request routine, called from Linux kernel.
|
|
*/
|
|
static void do_sbpcd_request(request_queue_t * q)
|
|
{
|
|
u_int block;
|
|
u_int nsect;
|
|
int status_tries, data_tries;
|
|
struct request *req;
|
|
struct sbpcd_drive *p;
|
|
#ifdef DEBUG_GTL
|
|
static int xx_nr=0;
|
|
int xnr;
|
|
#endif
|
|
|
|
request_loop:
|
|
#ifdef DEBUG_GTL
|
|
xnr=++xx_nr;
|
|
|
|
req = elv_next_request(q);
|
|
|
|
if (!req)
|
|
{
|
|
printk( "do_sbpcd_request[%di](NULL), Pid:%d, Time:%li\n",
|
|
xnr, current->pid, jiffies);
|
|
printk( "do_sbpcd_request[%do](NULL) end 0 (null), Time:%li\n",
|
|
xnr, jiffies);
|
|
return;
|
|
}
|
|
|
|
printk(" do_sbpcd_request[%di](%p:%ld+%ld), Pid:%d, Time:%li\n",
|
|
xnr, req, req->sector, req->nr_sectors, current->pid, jiffies);
|
|
#endif
|
|
|
|
req = elv_next_request(q); /* take out our request so no other */
|
|
if (!req)
|
|
return;
|
|
|
|
if (req -> sector == -1)
|
|
end_request(req, 0);
|
|
spin_unlock_irq(q->queue_lock);
|
|
|
|
down(&ioctl_read_sem);
|
|
if (rq_data_dir(elv_next_request(q)) != READ)
|
|
{
|
|
msg(DBG_INF, "bad cmd %d\n", req->cmd[0]);
|
|
goto err_done;
|
|
}
|
|
p = req->rq_disk->private_data;
|
|
#if OLD_BUSY
|
|
while (busy_audio) sbp_sleep(HZ); /* wait a bit */
|
|
busy_data=1;
|
|
#endif /* OLD_BUSY */
|
|
|
|
if (p->audio_state==audio_playing) goto err_done;
|
|
if (p != current_drive)
|
|
switch_drive(p);
|
|
|
|
block = req->sector; /* always numbered as 512-byte-pieces */
|
|
nsect = req->nr_sectors; /* always counted as 512-byte-pieces */
|
|
|
|
msg(DBG_BSZ,"read sector %d (%d sectors)\n", block, nsect);
|
|
#if 0
|
|
msg(DBG_MUL,"read LBA %d\n", block/4);
|
|
#endif
|
|
|
|
sbp_transfer(req);
|
|
/* if we satisfied the request from the buffer, we're done. */
|
|
if (req->nr_sectors == 0)
|
|
{
|
|
#ifdef DEBUG_GTL
|
|
printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 2, Time:%li\n",
|
|
xnr, req, req->sector, req->nr_sectors, jiffies);
|
|
#endif
|
|
up(&ioctl_read_sem);
|
|
spin_lock_irq(q->queue_lock);
|
|
end_request(req, 1);
|
|
goto request_loop;
|
|
}
|
|
|
|
#ifdef FUTURE
|
|
i=prepare(0,0); /* at moment not really a hassle check, but ... */
|
|
if (i!=0)
|
|
msg(DBG_INF,"\"prepare\" tells error %d -- ignored\n", i);
|
|
#endif /* FUTURE */
|
|
|
|
if (!st_spinning) cc_SpinUp();
|
|
|
|
for (data_tries=n_retries; data_tries > 0; data_tries--)
|
|
{
|
|
for (status_tries=3; status_tries > 0; status_tries--)
|
|
{
|
|
flags_cmd_out |= f_respo3;
|
|
cc_ReadStatus();
|
|
if (sbp_status() != 0) break;
|
|
if (st_check) cc_ReadError();
|
|
sbp_sleep(1); /* wait a bit, try again */
|
|
}
|
|
if (status_tries == 0)
|
|
{
|
|
msg(DBG_INF,"sbp_status: failed after 3 tries in line %d\n", __LINE__);
|
|
break;
|
|
}
|
|
|
|
sbp_read_cmd(req);
|
|
sbp_sleep(0);
|
|
if (sbp_data(req) != 0)
|
|
{
|
|
#ifdef SAFE_MIXED
|
|
current_drive->has_data=2; /* is really a data disk */
|
|
#endif /* SAFE_MIXED */
|
|
#ifdef DEBUG_GTL
|
|
printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 3, Time:%li\n",
|
|
xnr, req, req->sector, req->nr_sectors, jiffies);
|
|
#endif
|
|
up(&ioctl_read_sem);
|
|
spin_lock_irq(q->queue_lock);
|
|
end_request(req, 1);
|
|
goto request_loop;
|
|
}
|
|
}
|
|
|
|
err_done:
|
|
#if OLD_BUSY
|
|
busy_data=0;
|
|
#endif /* OLD_BUSY */
|
|
#ifdef DEBUG_GTL
|
|
printk(" do_sbpcd_request[%do](%p:%ld+%ld) end 4 (error), Time:%li\n",
|
|
xnr, req, req->sector, req->nr_sectors, jiffies);
|
|
#endif
|
|
up(&ioctl_read_sem);
|
|
sbp_sleep(0); /* wait a bit, try again */
|
|
spin_lock_irq(q->queue_lock);
|
|
end_request(req, 0);
|
|
goto request_loop;
|
|
}
|
|
/*==========================================================================*/
|
|
/*
|
|
* build and send the READ command.
|
|
*/
|
|
static void sbp_read_cmd(struct request *req)
|
|
{
|
|
#undef OLD
|
|
|
|
int i;
|
|
int block;
|
|
|
|
current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1; /* purge buffer */
|
|
current_drive->sbp_current = 0;
|
|
block=req->sector/4;
|
|
if (block+current_drive->sbp_bufsiz <= current_drive->CDsize_frm)
|
|
current_drive->sbp_read_frames = current_drive->sbp_bufsiz;
|
|
else
|
|
{
|
|
current_drive->sbp_read_frames=current_drive->CDsize_frm-block;
|
|
/* avoid reading past end of data */
|
|
if (current_drive->sbp_read_frames < 1)
|
|
{
|
|
msg(DBG_INF,"requested frame %d, CD size %d ???\n",
|
|
block, current_drive->CDsize_frm);
|
|
current_drive->sbp_read_frames=1;
|
|
}
|
|
}
|
|
|
|
flags_cmd_out = f_putcmd | f_respo2 | f_ResponseStatus | f_obey_p_check;
|
|
clr_cmdbuf();
|
|
if (famV_drive)
|
|
{
|
|
drvcmd[0]=CMDV_READ;
|
|
lba2msf(block,&drvcmd[1]); /* msf-bcd format required */
|
|
bin2bcdx(&drvcmd[1]);
|
|
bin2bcdx(&drvcmd[2]);
|
|
bin2bcdx(&drvcmd[3]);
|
|
drvcmd[4]=current_drive->sbp_read_frames>>8;
|
|
drvcmd[5]=current_drive->sbp_read_frames&0xff;
|
|
drvcmd[6]=0x02; /* flag "msf-bcd" */
|
|
}
|
|
else if (fam0L_drive)
|
|
{
|
|
flags_cmd_out |= f_lopsta | f_getsta | f_bit1;
|
|
if (current_drive->xa_byte==0x20)
|
|
{
|
|
cmd_type=READ_M2;
|
|
drvcmd[0]=CMD0_READ_XA; /* "read XA frames", old drives */
|
|
drvcmd[1]=(block>>16)&0x0ff;
|
|
drvcmd[2]=(block>>8)&0x0ff;
|
|
drvcmd[3]=block&0x0ff;
|
|
drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
|
|
drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
|
|
}
|
|
else
|
|
{
|
|
drvcmd[0]=CMD0_READ; /* "read frames", old drives */
|
|
if (current_drive->drv_type>=drv_201)
|
|
{
|
|
lba2msf(block,&drvcmd[1]); /* msf-bcd format required */
|
|
bin2bcdx(&drvcmd[1]);
|
|
bin2bcdx(&drvcmd[2]);
|
|
bin2bcdx(&drvcmd[3]);
|
|
}
|
|
else
|
|
{
|
|
drvcmd[1]=(block>>16)&0x0ff;
|
|
drvcmd[2]=(block>>8)&0x0ff;
|
|
drvcmd[3]=block&0x0ff;
|
|
}
|
|
drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
|
|
drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
|
|
drvcmd[6]=(current_drive->drv_type<drv_201)?0:2; /* flag "lba or msf-bcd format" */
|
|
}
|
|
}
|
|
else if (fam1_drive)
|
|
{
|
|
drvcmd[0]=CMD1_READ;
|
|
lba2msf(block,&drvcmd[1]); /* msf-bin format required */
|
|
drvcmd[5]=(current_drive->sbp_read_frames>>8)&0x0ff;
|
|
drvcmd[6]=current_drive->sbp_read_frames&0x0ff;
|
|
}
|
|
else if (fam2_drive)
|
|
{
|
|
drvcmd[0]=CMD2_READ;
|
|
lba2msf(block,&drvcmd[1]); /* msf-bin format required */
|
|
drvcmd[4]=(current_drive->sbp_read_frames>>8)&0x0ff;
|
|
drvcmd[5]=current_drive->sbp_read_frames&0x0ff;
|
|
drvcmd[6]=0x02;
|
|
}
|
|
else if (famT_drive)
|
|
{
|
|
drvcmd[0]=CMDT_READ;
|
|
drvcmd[2]=(block>>24)&0x0ff;
|
|
drvcmd[3]=(block>>16)&0x0ff;
|
|
drvcmd[4]=(block>>8)&0x0ff;
|
|
drvcmd[5]=block&0x0ff;
|
|
drvcmd[7]=(current_drive->sbp_read_frames>>8)&0x0ff;
|
|
drvcmd[8]=current_drive->sbp_read_frames&0x0ff;
|
|
}
|
|
flags_cmd_out=f_putcmd;
|
|
response_count=0;
|
|
i=cmd_out();
|
|
if (i<0) msg(DBG_INF,"error giving READ command: %0d\n", i);
|
|
return;
|
|
}
|
|
/*==========================================================================*/
|
|
/*
|
|
* Check the completion of the read-data command. On success, read
|
|
* the current_drive->sbp_bufsiz * 2048 bytes of data from the disk into buffer.
|
|
*/
|
|
static int sbp_data(struct request *req)
|
|
{
|
|
int i=0, j=0, l, frame;
|
|
u_int try=0;
|
|
u_long timeout;
|
|
u_char *p;
|
|
u_int data_tries = 0;
|
|
u_int data_waits = 0;
|
|
u_int data_retrying = 0;
|
|
int error_flag;
|
|
int xa_count;
|
|
int max_latency;
|
|
int success;
|
|
int wait;
|
|
int duration;
|
|
|
|
error_flag=0;
|
|
success=0;
|
|
#if LONG_TIMING
|
|
max_latency=9*HZ;
|
|
#else
|
|
if (current_drive->f_multisession) max_latency=15*HZ;
|
|
else max_latency=5*HZ;
|
|
#endif
|
|
duration=jiffies;
|
|
for (frame=0;frame<current_drive->sbp_read_frames&&!error_flag; frame++)
|
|
{
|
|
SBPCD_CLI;
|
|
|
|
del_timer(&data_timer);
|
|
data_timer.expires=jiffies+max_latency;
|
|
timed_out_data=0;
|
|
add_timer(&data_timer);
|
|
while (!timed_out_data)
|
|
{
|
|
if (current_drive->f_multisession) try=maxtim_data*4;
|
|
else try=maxtim_data;
|
|
msg(DBG_000,"sbp_data: CDi_status loop: try=%d.\n",try);
|
|
for ( ; try!=0;try--)
|
|
{
|
|
j=inb(CDi_status);
|
|
if (!(j&s_not_data_ready)) break;
|
|
if (!(j&s_not_result_ready)) break;
|
|
if (fam0LV_drive) if (j&s_attention) break;
|
|
}
|
|
if (!(j&s_not_data_ready)) goto data_ready;
|
|
if (try==0)
|
|
{
|
|
if (data_retrying == 0) data_waits++;
|
|
data_retrying = 1;
|
|
msg(DBG_000,"sbp_data: CDi_status loop: sleeping.\n");
|
|
sbp_sleep(1);
|
|
try = 1;
|
|
}
|
|
}
|
|
msg(DBG_INF,"sbp_data: CDi_status loop expired.\n");
|
|
data_ready:
|
|
del_timer(&data_timer);
|
|
|
|
if (timed_out_data)
|
|
{
|
|
msg(DBG_INF,"sbp_data: CDi_status timeout (timed_out_data) (%02X).\n", j);
|
|
error_flag++;
|
|
}
|
|
if (try==0)
|
|
{
|
|
msg(DBG_INF,"sbp_data: CDi_status timeout (try=0) (%02X).\n", j);
|
|
error_flag++;
|
|
}
|
|
if (!(j&s_not_result_ready))
|
|
{
|
|
msg(DBG_INF, "sbp_data: RESULT_READY where DATA_READY awaited (%02X).\n", j);
|
|
response_count=20;
|
|
j=ResponseInfo();
|
|
j=inb(CDi_status);
|
|
}
|
|
if (j&s_not_data_ready)
|
|
{
|
|
if ((current_drive->ored_ctl_adr&0x40)==0)
|
|
msg(DBG_INF, "CD contains no data tracks.\n");
|
|
else msg(DBG_INF, "sbp_data: DATA_READY timeout (%02X).\n", j);
|
|
error_flag++;
|
|
}
|
|
SBPCD_STI;
|
|
if (error_flag) break;
|
|
|
|
msg(DBG_000, "sbp_data: beginning to read.\n");
|
|
p = current_drive->sbp_buf + frame * CD_FRAMESIZE;
|
|
if (sbpro_type==1) OUT(CDo_sel_i_d,1);
|
|
if (cmd_type==READ_M2) {
|
|
if (do_16bit) insw(CDi_data, xa_head_buf, CD_XA_HEAD>>1);
|
|
else insb(CDi_data, xa_head_buf, CD_XA_HEAD);
|
|
}
|
|
if (do_16bit) insw(CDi_data, p, CD_FRAMESIZE>>1);
|
|
else insb(CDi_data, p, CD_FRAMESIZE);
|
|
if (cmd_type==READ_M2) {
|
|
if (do_16bit) insw(CDi_data, xa_tail_buf, CD_XA_TAIL>>1);
|
|
else insb(CDi_data, xa_tail_buf, CD_XA_TAIL);
|
|
}
|
|
current_drive->sbp_current++;
|
|
if (sbpro_type==1) OUT(CDo_sel_i_d,0);
|
|
if (cmd_type==READ_M2)
|
|
{
|
|
for (xa_count=0;xa_count<CD_XA_HEAD;xa_count++)
|
|
sprintf(&msgbuf[xa_count*3], " %02X", xa_head_buf[xa_count]);
|
|
msgbuf[xa_count*3]=0;
|
|
msg(DBG_XA1,"xa head:%s\n", msgbuf);
|
|
}
|
|
data_retrying = 0;
|
|
data_tries++;
|
|
if (data_tries >= 1000)
|
|
{
|
|
msg(DBG_INF,"sbp_data() statistics: %d waits in %d frames.\n", data_waits, data_tries);
|
|
data_waits = data_tries = 0;
|
|
}
|
|
}
|
|
duration=jiffies-duration;
|
|
msg(DBG_TEA,"time to read %d frames: %d jiffies .\n",frame,duration);
|
|
if (famT_drive)
|
|
{
|
|
wait=8;
|
|
do
|
|
{
|
|
if (teac==2)
|
|
{
|
|
if ((i=CDi_stat_loop_T()) == -1) break;
|
|
}
|
|
else
|
|
{
|
|
sbp_sleep(1);
|
|
OUT(CDo_sel_i_d,0);
|
|
i=inb(CDi_status);
|
|
}
|
|
if (!(i&s_not_data_ready))
|
|
{
|
|
OUT(CDo_sel_i_d,1);
|
|
j=0;
|
|
do
|
|
{
|
|
if (do_16bit) i=inw(CDi_data);
|
|
else i=inb(CDi_data);
|
|
j++;
|
|
i=inb(CDi_status);
|
|
}
|
|
while (!(i&s_not_data_ready));
|
|
msg(DBG_TEA, "==========too much data (%d bytes/words)==============.\n", j);
|
|
}
|
|
if (!(i&s_not_result_ready))
|
|
{
|
|
OUT(CDo_sel_i_d,0);
|
|
l=0;
|
|
do
|
|
{
|
|
infobuf[l++]=inb(CDi_info);
|
|
i=inb(CDi_status);
|
|
}
|
|
while (!(i&s_not_result_ready));
|
|
if (infobuf[0]==0x00) success=1;
|
|
#if 1
|
|
for (j=0;j<l;j++) sprintf(&msgbuf[j*3], " %02X", infobuf[j]);
|
|
msgbuf[j*3]=0;
|
|
msg(DBG_TEA,"sbp_data info response:%s\n", msgbuf);
|
|
#endif
|
|
if (infobuf[0]==0x02)
|
|
{
|
|
error_flag++;
|
|
do
|
|
{
|
|
++recursion;
|
|
if (recursion>1) msg(DBG_TEA,"cmd_out_T READ_ERR recursion (sbp_data): %d !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\n",recursion);
|
|
else msg(DBG_TEA,"sbp_data: CMDT_READ_ERR necessary.\n");
|
|
clr_cmdbuf();
|
|
drvcmd[0]=CMDT_READ_ERR;
|
|
j=cmd_out_T(); /* !!! recursive here !!! */
|
|
--recursion;
|
|
sbp_sleep(1);
|
|
}
|
|
while (j<0);
|
|
current_drive->error_state=infobuf[2];
|
|
current_drive->b3=infobuf[3];
|
|
current_drive->b4=infobuf[4];
|
|
}
|
|
break;
|
|
}
|
|
else
|
|
{
|
|
#if 0
|
|
msg(DBG_TEA, "============= waiting for result=================.\n");
|
|
sbp_sleep(1);
|
|
#endif
|
|
}
|
|
}
|
|
while (wait--);
|
|
}
|
|
|
|
if (error_flag) /* must have been spurious D_RDY or (ATTN&&!D_RDY) */
|
|
{
|
|
msg(DBG_TEA, "================error flag: %d=================.\n", error_flag);
|
|
msg(DBG_INF,"sbp_data: read aborted by drive.\n");
|
|
#if 1
|
|
i=cc_DriveReset(); /* ugly fix to prevent a hang */
|
|
#else
|
|
i=cc_ReadError();
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
if (fam0LV_drive)
|
|
{
|
|
SBPCD_CLI;
|
|
i=maxtim_data;
|
|
for (timeout=jiffies+HZ; time_before(jiffies, timeout); timeout--)
|
|
{
|
|
for ( ;i!=0;i--)
|
|
{
|
|
j=inb(CDi_status);
|
|
if (!(j&s_not_data_ready)) break;
|
|
if (!(j&s_not_result_ready)) break;
|
|
if (j&s_attention) break;
|
|
}
|
|
if (i != 0 || time_after_eq(jiffies, timeout)) break;
|
|
sbp_sleep(0);
|
|
i = 1;
|
|
}
|
|
if (i==0) msg(DBG_INF,"status timeout after READ.\n");
|
|
if (!(j&s_attention))
|
|
{
|
|
msg(DBG_INF,"sbp_data: timeout waiting DRV_ATTN - retrying.\n");
|
|
i=cc_DriveReset(); /* ugly fix to prevent a hang */
|
|
SBPCD_STI;
|
|
return (0);
|
|
}
|
|
SBPCD_STI;
|
|
}
|
|
|
|
#if 0
|
|
if (!success)
|
|
#endif
|
|
do
|
|
{
|
|
if (fam0LV_drive) cc_ReadStatus();
|
|
#if 1
|
|
if (famT_drive) msg(DBG_TEA, "================before ResponseStatus=================.\n", i);
|
|
#endif
|
|
i=ResponseStatus(); /* builds status_bits, returns orig. status (old) or faked p_success (new) */
|
|
#if 1
|
|
if (famT_drive) msg(DBG_TEA, "================ResponseStatus: %d=================.\n", i);
|
|
#endif
|
|
if (i<0)
|
|
{
|
|
msg(DBG_INF,"bad cc_ReadStatus after read: %02X\n", current_drive->status_bits);
|
|
return (0);
|
|
}
|
|
}
|
|
while ((fam0LV_drive)&&(!st_check)&&(!(i&p_success)));
|
|
if (st_check)
|
|
{
|
|
i=cc_ReadError();
|
|
msg(DBG_INF,"cc_ReadError was necessary after read: %d\n",i);
|
|
return (0);
|
|
}
|
|
if (fatal_err)
|
|
{
|
|
fatal_err=0;
|
|
current_drive->sbp_first_frame=current_drive->sbp_last_frame=-1; /* purge buffer */
|
|
current_drive->sbp_current = 0;
|
|
msg(DBG_INF,"sbp_data: fatal_err - retrying.\n");
|
|
return (0);
|
|
}
|
|
|
|
current_drive->sbp_first_frame = req -> sector / 4;
|
|
current_drive->sbp_last_frame = current_drive->sbp_first_frame + current_drive->sbp_read_frames - 1;
|
|
sbp_transfer(req);
|
|
return (1);
|
|
}
|
|
/*==========================================================================*/
|
|
|
|
static int sbpcd_block_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
|
|
return cdrom_open(p->sbpcd_infop, inode, file);
|
|
}
|
|
|
|
static int sbpcd_block_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
|
|
return cdrom_release(p->sbpcd_infop, file);
|
|
}
|
|
|
|
static int sbpcd_block_ioctl(struct inode *inode, struct file *file,
|
|
unsigned cmd, unsigned long arg)
|
|
{
|
|
struct sbpcd_drive *p = inode->i_bdev->bd_disk->private_data;
|
|
return cdrom_ioctl(file, p->sbpcd_infop, inode, cmd, arg);
|
|
}
|
|
|
|
static int sbpcd_block_media_changed(struct gendisk *disk)
|
|
{
|
|
struct sbpcd_drive *p = disk->private_data;
|
|
return cdrom_media_changed(p->sbpcd_infop);
|
|
}
|
|
|
|
static struct block_device_operations sbpcd_bdops =
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.open = sbpcd_block_open,
|
|
.release = sbpcd_block_release,
|
|
.ioctl = sbpcd_block_ioctl,
|
|
.media_changed = sbpcd_block_media_changed,
|
|
};
|
|
/*==========================================================================*/
|
|
/*
|
|
* Open the device special file. Check that a disk is in. Read TOC.
|
|
*/
|
|
static int sbpcd_open(struct cdrom_device_info *cdi, int purpose)
|
|
{
|
|
struct sbpcd_drive *p = cdi->handle;
|
|
|
|
down(&ioctl_read_sem);
|
|
switch_drive(p);
|
|
|
|
/*
|
|
* try to keep an "open" counter here and lock the door if 0->1.
|
|
*/
|
|
msg(DBG_LCK,"open_count: %d -> %d\n",
|
|
current_drive->open_count,current_drive->open_count+1);
|
|
if (++current_drive->open_count<=1)
|
|
{
|
|
int i;
|
|
i=LockDoor();
|
|
current_drive->open_count=1;
|
|
if (famT_drive) msg(DBG_TEA,"sbpcd_open: before i=DiskInfo();.\n");
|
|
i=DiskInfo();
|
|
if (famT_drive) msg(DBG_TEA,"sbpcd_open: after i=DiskInfo();.\n");
|
|
if ((current_drive->ored_ctl_adr&0x40)==0)
|
|
{
|
|
msg(DBG_INF,"CD contains no data tracks.\n");
|
|
#ifdef SAFE_MIXED
|
|
current_drive->has_data=0;
|
|
#endif /* SAFE_MIXED */
|
|
}
|
|
#ifdef SAFE_MIXED
|
|
else if (current_drive->has_data<1) current_drive->has_data=1;
|
|
#endif /* SAFE_MIXED */
|
|
}
|
|
if (!st_spinning) cc_SpinUp();
|
|
RETURN_UP(0);
|
|
}
|
|
/*==========================================================================*/
|
|
/*
|
|
* On close, we flush all sbp blocks from the buffer cache.
|
|
*/
|
|
static void sbpcd_release(struct cdrom_device_info * cdi)
|
|
{
|
|
struct sbpcd_drive *p = cdi->handle;
|
|
|
|
if (p->drv_id==-1) {
|
|
msg(DBG_INF, "release: bad device: %s\n", cdi->name);
|
|
return;
|
|
}
|
|
down(&ioctl_read_sem);
|
|
switch_drive(p);
|
|
/*
|
|
* try to keep an "open" counter here and unlock the door if 1->0.
|
|
*/
|
|
msg(DBG_LCK,"open_count: %d -> %d\n",
|
|
p->open_count,p->open_count-1);
|
|
if (p->open_count>-2) /* CDROMEJECT may have been done */
|
|
{
|
|
if (--p->open_count<=0)
|
|
{
|
|
p->sbp_first_frame=p->sbp_last_frame=-1;
|
|
if (p->audio_state!=audio_playing)
|
|
if (p->f_eject) cc_SpinDown();
|
|
p->diskstate_flags &= ~cd_size_bit;
|
|
p->open_count=0;
|
|
#ifdef SAFE_MIXED
|
|
p->has_data=0;
|
|
#endif /* SAFE_MIXED */
|
|
}
|
|
}
|
|
up(&ioctl_read_sem);
|
|
return ;
|
|
}
|
|
/*==========================================================================*/
|
|
/*
|
|
*
|
|
*/
|
|
static int sbpcd_media_changed( struct cdrom_device_info *cdi, int disc_nr);
|
|
static struct cdrom_device_ops sbpcd_dops = {
|
|
.open = sbpcd_open,
|
|
.release = sbpcd_release,
|
|
.drive_status = sbpcd_drive_status,
|
|
.media_changed = sbpcd_media_changed,
|
|
.tray_move = sbpcd_tray_move,
|
|
.lock_door = sbpcd_lock_door,
|
|
.select_speed = sbpcd_select_speed,
|
|
.get_last_session = sbpcd_get_last_session,
|
|
.get_mcn = sbpcd_get_mcn,
|
|
.reset = sbpcd_reset,
|
|
.audio_ioctl = sbpcd_audio_ioctl,
|
|
.dev_ioctl = sbpcd_dev_ioctl,
|
|
.capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
|
|
CDC_MULTI_SESSION | CDC_MEDIA_CHANGED |
|
|
CDC_MCN | CDC_PLAY_AUDIO | CDC_IOCTLS,
|
|
.n_minors = 1,
|
|
};
|
|
|
|
/*==========================================================================*/
|
|
/*
|
|
* accept "kernel command line" parameters
|
|
* (suggested by Peter MacDonald with SLS 1.03)
|
|
*
|
|
* This is only implemented for the first controller. Should be enough to
|
|
* allow installing with a "strange" distribution kernel.
|
|
*
|
|
* use: tell LILO:
|
|
* sbpcd=0x230,SoundBlaster
|
|
* or
|
|
* sbpcd=0x300,LaserMate
|
|
* or
|
|
* sbpcd=0x338,SoundScape
|
|
* or
|
|
* sbpcd=0x2C0,Teac16bit
|
|
*
|
|
* (upper/lower case sensitive here - but all-lowercase is ok!!!).
|
|
*
|
|
* the address value has to be the CDROM PORT ADDRESS -
|
|
* not the soundcard base address.
|
|
* For the SPEA/SoundScape setup, DO NOT specify the "configuration port"
|
|
* address, but the address which is really used for the CDROM (usually 8
|
|
* bytes above).
|
|
*
|
|
*/
|
|
|
|
int sbpcd_setup(char *s)
|
|
{
|
|
#ifndef MODULE
|
|
int p[4];
|
|
(void)get_options(s, ARRAY_SIZE(p), p);
|
|
setup_done++;
|
|
msg(DBG_INI,"sbpcd_setup called with %04X,%s\n",p[1], s);
|
|
sbpro_type=0; /* default: "LaserMate" */
|
|
if (p[0]>1) sbpro_type=p[2];
|
|
else if (!strcmp(s,str_sb)) sbpro_type=1;
|
|
else if (!strcmp(s,str_sb_l)) sbpro_type=1;
|
|
else if (!strcmp(s,str_sp)) sbpro_type=2;
|
|
else if (!strcmp(s,str_sp_l)) sbpro_type=2;
|
|
else if (!strcmp(s,str_ss)) sbpro_type=2;
|
|
else if (!strcmp(s,str_ss_l)) sbpro_type=2;
|
|
else if (!strcmp(s,str_t16)) sbpro_type=3;
|
|
else if (!strcmp(s,str_t16_l)) sbpro_type=3;
|
|
if (p[0]>0) sbpcd_ioaddr=p[1];
|
|
if (p[0]>2) max_drives=p[3];
|
|
#else
|
|
sbpcd_ioaddr = sbpcd[0];
|
|
sbpro_type = sbpcd[1];
|
|
#endif
|
|
|
|
CDo_command=sbpcd_ioaddr;
|
|
CDi_info=sbpcd_ioaddr;
|
|
CDi_status=sbpcd_ioaddr+1;
|
|
CDo_sel_i_d=sbpcd_ioaddr+1;
|
|
CDo_reset=sbpcd_ioaddr+2;
|
|
CDo_enable=sbpcd_ioaddr+3;
|
|
f_16bit=0;
|
|
if ((sbpro_type==1)||(sbpro_type==3))
|
|
{
|
|
CDi_data=sbpcd_ioaddr;
|
|
if (sbpro_type==3)
|
|
{
|
|
f_16bit=1;
|
|
sbpro_type=1;
|
|
}
|
|
}
|
|
else CDi_data=sbpcd_ioaddr+2;
|
|
|
|
return 1;
|
|
}
|
|
|
|
__setup("sbpcd=", sbpcd_setup);
|
|
|
|
|
|
/*==========================================================================*/
|
|
/*
|
|
* Sequoia S-1000 CD-ROM Interface Configuration
|
|
* as used within SPEA Media FX, Ensonic SoundScape and some Reveal cards
|
|
* The soundcard has to get jumpered for the interface type "Panasonic"
|
|
* (not Sony or Mitsumi) and to get soft-configured for
|
|
* -> configuration port address
|
|
* -> CDROM port offset (num_ports): has to be 8 here. Possibly this
|
|
* offset value determines the interface type (none, Panasonic,
|
|
* Mitsumi, Sony).
|
|
* The interface uses a configuration port (0x320, 0x330, 0x340, 0x350)
|
|
* some bytes below the real CDROM address.
|
|
*
|
|
* For the Panasonic style (LaserMate) interface and the configuration
|
|
* port 0x330, we have to use an offset of 8; so, the real CDROM port
|
|
* address is 0x338.
|
|
*/
|
|
static int __init config_spea(void)
|
|
{
|
|
/*
|
|
* base address offset between configuration port and CDROM port,
|
|
* this probably defines the interface type
|
|
* 2 (type=??): 0x00
|
|
* 8 (type=LaserMate):0x10
|
|
* 16 (type=??):0x20
|
|
* 32 (type=??):0x30
|
|
*/
|
|
int n_ports=0x10;
|
|
|
|
int irq_number=0; /* off:0x00, 2/9:0x01, 7:0x03, 12:0x05, 15:0x07 */
|
|
int dma_channel=0; /* off: 0x00, 0:0x08, 1:0x18, 3:0x38, 5:0x58, 6:0x68 */
|
|
int dack_polarity=0; /* L:0x00, H:0x80 */
|
|
int drq_polarity=0x40; /* L:0x00, H:0x40 */
|
|
int i;
|
|
|
|
#define SPEA_REG_1 sbpcd_ioaddr-0x08+4
|
|
#define SPEA_REG_2 sbpcd_ioaddr-0x08+5
|
|
|
|
OUT(SPEA_REG_1,0xFF);
|
|
i=inb(SPEA_REG_1);
|
|
if (i!=0x0F)
|
|
{
|
|
msg(DBG_SEQ,"no SPEA interface at %04X present.\n", sbpcd_ioaddr);
|
|
return (-1); /* no interface found */
|
|
}
|
|
OUT(SPEA_REG_1,0x04);
|
|
OUT(SPEA_REG_2,0xC0);
|
|
|
|
OUT(SPEA_REG_1,0x05);
|
|
OUT(SPEA_REG_2,0x10|drq_polarity|dack_polarity);
|
|
|
|
#if 1
|
|
#define SPEA_PATTERN 0x80
|
|
#else
|
|
#define SPEA_PATTERN 0x00
|
|
#endif
|
|
OUT(SPEA_REG_1,0x06);
|
|
OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
|
|
OUT(SPEA_REG_2,dma_channel|irq_number|SPEA_PATTERN);
|
|
|
|
OUT(SPEA_REG_1,0x09);
|
|
i=(inb(SPEA_REG_2)&0xCF)|n_ports;
|
|
OUT(SPEA_REG_2,i);
|
|
|
|
sbpro_type = 0; /* acts like a LaserMate interface now */
|
|
msg(DBG_SEQ,"found SoundScape interface at %04X.\n", sbpcd_ioaddr);
|
|
return (0);
|
|
}
|
|
|
|
/*==========================================================================*/
|
|
/*
|
|
* Test for presence of drive and initialize it.
|
|
* Called once at boot or load time.
|
|
*/
|
|
|
|
/* FIXME: cleanups after failed allocations are too ugly for words */
|
|
#ifdef MODULE
|
|
int __init __sbpcd_init(void)
|
|
#else
|
|
int __init sbpcd_init(void)
|
|
#endif
|
|
{
|
|
int i=0, j=0;
|
|
int addr[2]={1, CDROM_PORT};
|
|
int port_index;
|
|
|
|
sti();
|
|
|
|
msg(DBG_INF,"sbpcd.c %s\n", VERSION);
|
|
#ifndef MODULE
|
|
#if DISTRIBUTION
|
|
if (!setup_done)
|
|
{
|
|
msg(DBG_INF,"Looking for Matsushita/Panasonic, CreativeLabs, Longshine, TEAC CD-ROM drives\n");
|
|
msg(DBG_INF,"= = = = = = = = = = W A R N I N G = = = = = = = = = =\n");
|
|
msg(DBG_INF,"Auto-Probing can cause a hang (f.e. touching an NE2000 card).\n");
|
|
msg(DBG_INF,"If that happens, you have to reboot and use the\n");
|
|
msg(DBG_INF,"LILO (kernel) command line feature like:\n");
|
|
msg(DBG_INF," LILO boot: ... sbpcd=0x230,SoundBlaster\n");
|
|
msg(DBG_INF,"or like:\n");
|
|
msg(DBG_INF," LILO boot: ... sbpcd=0x300,LaserMate\n");
|
|
msg(DBG_INF,"or like:\n");
|
|
msg(DBG_INF," LILO boot: ... sbpcd=0x338,SoundScape\n");
|
|
msg(DBG_INF,"with your REAL address.\n");
|
|
msg(DBG_INF,"= = = = = = = = = = END of WARNING = = = = = == = = =\n");
|
|
}
|
|
#endif /* DISTRIBUTION */
|
|
sbpcd[0]=sbpcd_ioaddr; /* possibly changed by kernel command line */
|
|
sbpcd[1]=sbpro_type; /* possibly changed by kernel command line */
|
|
#endif /* MODULE */
|
|
|
|
for (port_index=0;port_index<NUM_PROBE;port_index+=2)
|
|
{
|
|
addr[1]=sbpcd[port_index];
|
|
if (addr[1]==0) break;
|
|
if (check_region(addr[1],4))
|
|
{
|
|
msg(DBG_INF,"check_region: %03X is not free.\n",addr[1]);
|
|
continue;
|
|
}
|
|
if (sbpcd[port_index+1]==2) type=str_sp;
|
|
else if (sbpcd[port_index+1]==1) type=str_sb;
|
|
else if (sbpcd[port_index+1]==3) type=str_t16;
|
|
else type=str_lm;
|
|
sbpcd_setup((char *)type);
|
|
#if DISTRIBUTION
|
|
msg(DBG_INF,"Scanning 0x%X (%s)...\n", CDo_command, type);
|
|
#endif /* DISTRIBUTION */
|
|
if (sbpcd[port_index+1]==2)
|
|
{
|
|
i=config_spea();
|
|
if (i<0) continue;
|
|
}
|
|
#ifdef PATH_CHECK
|
|
if (check_card(addr[1])) continue;
|
|
#endif /* PATH_CHECK */
|
|
i=check_drives();
|
|
msg(DBG_INI,"check_drives done.\n");
|
|
if (i>=0) break; /* drive found */
|
|
} /* end of cycling through the set of possible I/O port addresses */
|
|
|
|
if (ndrives==0)
|
|
{
|
|
msg(DBG_INF, "No drive found.\n");
|
|
#ifdef MODULE
|
|
return -EIO;
|
|
#else
|
|
goto init_done;
|
|
#endif /* MODULE */
|
|
}
|
|
|
|
if (port_index>0)
|
|
{
|
|
msg(DBG_INF, "You should read Documentation/cdrom/sbpcd\n");
|
|
msg(DBG_INF, "and then configure sbpcd.h for your hardware.\n");
|
|
}
|
|
check_datarate();
|
|
msg(DBG_INI,"check_datarate done.\n");
|
|
|
|
for (j=0;j<NR_SBPCD;j++)
|
|
{
|
|
struct sbpcd_drive *p = D_S + j;
|
|
if (p->drv_id==-1)
|
|
continue;
|
|
switch_drive(p);
|
|
#if 1
|
|
if (!famL_drive) cc_DriveReset();
|
|
#endif
|
|
if (!st_spinning) cc_SpinUp();
|
|
p->sbp_first_frame = -1; /* First frame in buffer */
|
|
p->sbp_last_frame = -1; /* Last frame in buffer */
|
|
p->sbp_read_frames = 0; /* Number of frames being read to buffer */
|
|
p->sbp_current = 0; /* Frame being currently read */
|
|
p->CD_changed=1;
|
|
p->frame_size=CD_FRAMESIZE;
|
|
p->f_eject=0;
|
|
#if EJECT
|
|
if (!fam0_drive) p->f_eject=1;
|
|
#endif /* EJECT */
|
|
cc_ReadStatus();
|
|
i=ResponseStatus(); /* returns orig. status or p_busy_new */
|
|
if (famT_drive) i=ResponseStatus(); /* returns orig. status or p_busy_new */
|
|
if (i<0)
|
|
{
|
|
if (i!=-402)
|
|
msg(DBG_INF,"init: ResponseStatus returns %d.\n",i);
|
|
}
|
|
else
|
|
{
|
|
if (st_check)
|
|
{
|
|
i=cc_ReadError();
|
|
msg(DBG_INI,"init: cc_ReadError returns %d\n",i);
|
|
}
|
|
}
|
|
msg(DBG_INI,"init: first GetStatus: %d\n",i);
|
|
msg(DBG_LCS,"init: first GetStatus: error_byte=%d\n",
|
|
p->error_byte);
|
|
if (p->error_byte==aud_12)
|
|
{
|
|
timeout=jiffies+2*HZ;
|
|
do
|
|
{
|
|
i=GetStatus();
|
|
msg(DBG_INI,"init: second GetStatus: %02X\n",i);
|
|
msg(DBG_LCS,
|
|
"init: second GetStatus: error_byte=%d\n",
|
|
p->error_byte);
|
|
if (i<0) break;
|
|
if (!st_caddy_in) break;
|
|
}
|
|
while ((!st_diskok)||time_after(jiffies, timeout));
|
|
}
|
|
i=SetSpeed();
|
|
if (i>=0) p->CD_changed=1;
|
|
}
|
|
|
|
if (!request_region(CDo_command,4,major_name))
|
|
{
|
|
printk(KERN_WARNING "sbpcd: Unable to request region 0x%x\n", CDo_command);
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Turn on the CD audio channels.
|
|
* The addresses are obtained from SOUND_BASE (see sbpcd.h).
|
|
*/
|
|
#if SOUND_BASE
|
|
OUT(MIXER_addr,MIXER_CD_Volume); /* select SB Pro mixer register */
|
|
OUT(MIXER_data,0xCC); /* one nibble per channel, max. value: 0xFF */
|
|
#endif /* SOUND_BASE */
|
|
|
|
if (register_blkdev(MAJOR_NR, major_name)) {
|
|
#ifdef MODULE
|
|
return -EIO;
|
|
#else
|
|
goto init_done;
|
|
#endif /* MODULE */
|
|
}
|
|
|
|
/*
|
|
* init error handling is broken beyond belief in this driver...
|
|
*/
|
|
sbpcd_queue = blk_init_queue(do_sbpcd_request, &sbpcd_lock);
|
|
if (!sbpcd_queue) {
|
|
release_region(CDo_command,4);
|
|
unregister_blkdev(MAJOR_NR, major_name);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
devfs_mk_dir("sbp");
|
|
|
|
for (j=0;j<NR_SBPCD;j++)
|
|
{
|
|
struct cdrom_device_info * sbpcd_infop;
|
|
struct gendisk *disk;
|
|
struct sbpcd_drive *p = D_S + j;
|
|
|
|
if (p->drv_id==-1) continue;
|
|
switch_drive(p);
|
|
#ifdef SAFE_MIXED
|
|
p->has_data=0;
|
|
#endif /* SAFE_MIXED */
|
|
/*
|
|
* allocate memory for the frame buffers
|
|
*/
|
|
p->aud_buf=NULL;
|
|
p->sbp_audsiz=0;
|
|
p->sbp_bufsiz=buffers;
|
|
if (p->drv_type&drv_fam1)
|
|
if (READ_AUDIO>0)
|
|
p->sbp_audsiz = READ_AUDIO;
|
|
p->sbp_buf=(u_char *) vmalloc(buffers*CD_FRAMESIZE);
|
|
if (!p->sbp_buf) {
|
|
msg(DBG_INF,"data buffer (%d frames) not available.\n",
|
|
buffers);
|
|
if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL))
|
|
{
|
|
printk("Can't unregister %s\n", major_name);
|
|
}
|
|
release_region(CDo_command,4);
|
|
blk_cleanup_queue(sbpcd_queue);
|
|
return -EIO;
|
|
}
|
|
#ifdef MODULE
|
|
msg(DBG_INF,"data buffer size: %d frames.\n",buffers);
|
|
#endif /* MODULE */
|
|
if (p->sbp_audsiz>0)
|
|
{
|
|
p->aud_buf=(u_char *) vmalloc(p->sbp_audsiz*CD_FRAMESIZE_RAW);
|
|
if (p->aud_buf==NULL) msg(DBG_INF,"audio buffer (%d frames) not available.\n",p->sbp_audsiz);
|
|
else msg(DBG_INF,"audio buffer size: %d frames.\n",p->sbp_audsiz);
|
|
}
|
|
sbpcd_infop = vmalloc(sizeof (struct cdrom_device_info));
|
|
if (sbpcd_infop == NULL)
|
|
{
|
|
release_region(CDo_command,4);
|
|
blk_cleanup_queue(sbpcd_queue);
|
|
return -ENOMEM;
|
|
}
|
|
memset(sbpcd_infop, 0, sizeof(struct cdrom_device_info));
|
|
sbpcd_infop->ops = &sbpcd_dops;
|
|
sbpcd_infop->speed = 2;
|
|
sbpcd_infop->capacity = 1;
|
|
sprintf(sbpcd_infop->name, "sbpcd%d", j);
|
|
sbpcd_infop->handle = p;
|
|
p->sbpcd_infop = sbpcd_infop;
|
|
disk = alloc_disk(1);
|
|
disk->major = MAJOR_NR;
|
|
disk->first_minor = j;
|
|
disk->fops = &sbpcd_bdops;
|
|
strcpy(disk->disk_name, sbpcd_infop->name);
|
|
disk->flags = GENHD_FL_CD;
|
|
sprintf(disk->devfs_name, "sbp/c0t%d", p->drv_id);
|
|
p->disk = disk;
|
|
if (register_cdrom(sbpcd_infop))
|
|
{
|
|
printk(" sbpcd: Unable to register with Uniform CD-ROm driver\n");
|
|
}
|
|
disk->private_data = p;
|
|
disk->queue = sbpcd_queue;
|
|
add_disk(disk);
|
|
}
|
|
blk_queue_hardsect_size(sbpcd_queue, CD_FRAMESIZE);
|
|
|
|
#ifndef MODULE
|
|
init_done:
|
|
#endif
|
|
return 0;
|
|
}
|
|
/*==========================================================================*/
|
|
#ifdef MODULE
|
|
void sbpcd_exit(void)
|
|
{
|
|
int j;
|
|
|
|
if ((unregister_blkdev(MAJOR_NR, major_name) == -EINVAL))
|
|
{
|
|
msg(DBG_INF, "What's that: can't unregister %s.\n", major_name);
|
|
return;
|
|
}
|
|
release_region(CDo_command,4);
|
|
blk_cleanup_queue(sbpcd_queue);
|
|
for (j=0;j<NR_SBPCD;j++)
|
|
{
|
|
if (D_S[j].drv_id==-1) continue;
|
|
del_gendisk(D_S[j].disk);
|
|
put_disk(D_S[j].disk);
|
|
devfs_remove("sbp/c0t%d", j);
|
|
vfree(D_S[j].sbp_buf);
|
|
if (D_S[j].sbp_audsiz>0) vfree(D_S[j].aud_buf);
|
|
if ((unregister_cdrom(D_S[j].sbpcd_infop) == -EINVAL))
|
|
{
|
|
msg(DBG_INF, "What's that: can't unregister info %s.\n", major_name);
|
|
return;
|
|
}
|
|
vfree(D_S[j].sbpcd_infop);
|
|
}
|
|
devfs_remove("sbp");
|
|
msg(DBG_INF, "%s module released.\n", major_name);
|
|
}
|
|
|
|
|
|
module_init(__sbpcd_init) /*HACK!*/;
|
|
module_exit(sbpcd_exit);
|
|
|
|
|
|
#endif /* MODULE */
|
|
static int sbpcd_media_changed(struct cdrom_device_info *cdi, int disc_nr)
|
|
{
|
|
struct sbpcd_drive *p = cdi->handle;
|
|
msg(DBG_CHK,"media_check (%s) called\n", cdi->name);
|
|
|
|
if (p->CD_changed==0xFF)
|
|
{
|
|
p->CD_changed=0;
|
|
msg(DBG_CHK,"medium changed (drive %s)\n", cdi->name);
|
|
current_drive->diskstate_flags &= ~toc_bit;
|
|
/* we *don't* need invalidate here, it's done by caller */
|
|
current_drive->diskstate_flags &= ~cd_size_bit;
|
|
#ifdef SAFE_MIXED
|
|
current_drive->has_data=0;
|
|
#endif /* SAFE_MIXED */
|
|
|
|
return (1);
|
|
}
|
|
else
|
|
return (0);
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
/* FIXME: Old modules.conf claims MATSUSHITA_CDROM2_MAJOR and CDROM3, but
|
|
AFAICT this doesn't support those majors, so why? --RR 30 Jul 2003 */
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(MATSUSHITA_CDROM_MAJOR);
|
|
|
|
/*==========================================================================*/
|
|
/*
|
|
* Overrides for Emacs so that we follow Linus's tabbing style.
|
|
* Emacs will notice this stuff at the end of the file and automatically
|
|
* adjust the settings for this buffer only. This must remain at the end
|
|
* of the file.
|
|
* ---------------------------------------------------------------------------
|
|
* Local variables:
|
|
* c-indent-level: 8
|
|
* c-brace-imaginary-offset: 0
|
|
* c-brace-offset: -8
|
|
* c-argdecl-indent: 8
|
|
* c-label-offset: -8
|
|
* c-continued-statement-offset: 8
|
|
* c-continued-brace-offset: 0
|
|
* End:
|
|
*/
|
|
|