272 строки
6.6 KiB
C
272 строки
6.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* The Netronix embedded controller is a microcontroller found in some
|
|
* e-book readers designed by the original design manufacturer Netronix, Inc.
|
|
* It contains RTC, battery monitoring, system power management, and PWM
|
|
* functionality.
|
|
*
|
|
* This driver implements register access, version detection, and system
|
|
* power-off/reset.
|
|
*
|
|
* Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/ntxec.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/types.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#define NTXEC_REG_VERSION 0x00
|
|
#define NTXEC_REG_POWEROFF 0x50
|
|
#define NTXEC_REG_POWERKEEP 0x70
|
|
#define NTXEC_REG_RESET 0x90
|
|
|
|
#define NTXEC_POWEROFF_VALUE 0x0100
|
|
#define NTXEC_POWERKEEP_VALUE 0x0800
|
|
#define NTXEC_RESET_VALUE 0xff00
|
|
|
|
static struct i2c_client *poweroff_restart_client;
|
|
|
|
static void ntxec_poweroff(void)
|
|
{
|
|
int res;
|
|
u8 buf[3] = { NTXEC_REG_POWEROFF };
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.addr = poweroff_restart_client->addr,
|
|
.flags = 0,
|
|
.len = sizeof(buf),
|
|
.buf = buf,
|
|
},
|
|
};
|
|
|
|
put_unaligned_be16(NTXEC_POWEROFF_VALUE, buf + 1);
|
|
|
|
res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (res < 0)
|
|
dev_warn(&poweroff_restart_client->dev,
|
|
"Failed to power off (err = %d)\n", res);
|
|
|
|
/*
|
|
* The time from the register write until the host CPU is powered off
|
|
* has been observed to be about 2.5 to 3 seconds. Sleep long enough to
|
|
* safely avoid returning from the poweroff handler.
|
|
*/
|
|
msleep(5000);
|
|
}
|
|
|
|
static int ntxec_restart(struct notifier_block *nb,
|
|
unsigned long action, void *data)
|
|
{
|
|
int res;
|
|
u8 buf[3] = { NTXEC_REG_RESET };
|
|
/*
|
|
* NOTE: The lower half of the reset value is not sent, because sending
|
|
* it causes an I2C error. (The reset handler in the downstream driver
|
|
* does send the full two-byte value, but doesn't check the result).
|
|
*/
|
|
struct i2c_msg msgs[] = {
|
|
{
|
|
.addr = poweroff_restart_client->addr,
|
|
.flags = 0,
|
|
.len = sizeof(buf) - 1,
|
|
.buf = buf,
|
|
},
|
|
};
|
|
|
|
put_unaligned_be16(NTXEC_RESET_VALUE, buf + 1);
|
|
|
|
res = i2c_transfer(poweroff_restart_client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (res < 0)
|
|
dev_warn(&poweroff_restart_client->dev,
|
|
"Failed to restart (err = %d)\n", res);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block ntxec_restart_handler = {
|
|
.notifier_call = ntxec_restart,
|
|
.priority = 128,
|
|
};
|
|
|
|
static int regmap_ignore_write(void *context,
|
|
unsigned int reg, unsigned int val)
|
|
|
|
{
|
|
struct regmap *regmap = context;
|
|
|
|
regmap_write(regmap, reg, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int regmap_wrap_read(void *context, unsigned int reg,
|
|
unsigned int *val)
|
|
{
|
|
struct regmap *regmap = context;
|
|
|
|
return regmap_read(regmap, reg, val);
|
|
}
|
|
|
|
/*
|
|
* Some firmware versions do not ack written data, add a wrapper. It
|
|
* is used to stack another regmap on top.
|
|
*/
|
|
static const struct regmap_config regmap_config_noack = {
|
|
.name = "ntxec_noack",
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.cache_type = REGCACHE_NONE,
|
|
.reg_write = regmap_ignore_write,
|
|
.reg_read = regmap_wrap_read
|
|
};
|
|
|
|
static const struct regmap_config regmap_config = {
|
|
.name = "ntxec",
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.cache_type = REGCACHE_NONE,
|
|
.val_format_endian = REGMAP_ENDIAN_BIG,
|
|
};
|
|
|
|
static const struct mfd_cell ntxec_subdev[] = {
|
|
{ .name = "ntxec-rtc" },
|
|
{ .name = "ntxec-pwm" },
|
|
};
|
|
|
|
static const struct mfd_cell ntxec_subdev_pwm[] = {
|
|
{ .name = "ntxec-pwm" },
|
|
};
|
|
|
|
static int ntxec_probe(struct i2c_client *client)
|
|
{
|
|
struct ntxec *ec;
|
|
unsigned int version;
|
|
int res;
|
|
const struct mfd_cell *subdevs;
|
|
size_t n_subdevs;
|
|
|
|
ec = devm_kmalloc(&client->dev, sizeof(*ec), GFP_KERNEL);
|
|
if (!ec)
|
|
return -ENOMEM;
|
|
|
|
ec->dev = &client->dev;
|
|
|
|
ec->regmap = devm_regmap_init_i2c(client, ®map_config);
|
|
if (IS_ERR(ec->regmap)) {
|
|
dev_err(ec->dev, "Failed to set up regmap for device\n");
|
|
return PTR_ERR(ec->regmap);
|
|
}
|
|
|
|
/* Determine the firmware version */
|
|
res = regmap_read(ec->regmap, NTXEC_REG_VERSION, &version);
|
|
if (res < 0) {
|
|
dev_err(ec->dev, "Failed to read firmware version number\n");
|
|
return res;
|
|
}
|
|
|
|
/* Bail out if we encounter an unknown firmware version */
|
|
switch (version) {
|
|
case NTXEC_VERSION_KOBO_AURA:
|
|
subdevs = ntxec_subdev;
|
|
n_subdevs = ARRAY_SIZE(ntxec_subdev);
|
|
break;
|
|
case NTXEC_VERSION_TOLINO_SHINE2:
|
|
subdevs = ntxec_subdev_pwm;
|
|
n_subdevs = ARRAY_SIZE(ntxec_subdev_pwm);
|
|
/* Another regmap stacked on top of the other */
|
|
ec->regmap = devm_regmap_init(ec->dev, NULL,
|
|
ec->regmap,
|
|
®map_config_noack);
|
|
if (IS_ERR(ec->regmap))
|
|
return PTR_ERR(ec->regmap);
|
|
break;
|
|
default:
|
|
dev_err(ec->dev,
|
|
"Netronix embedded controller version %04x is not supported.\n",
|
|
version);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_info(ec->dev,
|
|
"Netronix embedded controller version %04x detected.\n", version);
|
|
|
|
if (of_device_is_system_power_controller(ec->dev->of_node)) {
|
|
/*
|
|
* Set the 'powerkeep' bit. This is necessary on some boards
|
|
* in order to keep the system running.
|
|
*/
|
|
res = regmap_write(ec->regmap, NTXEC_REG_POWERKEEP,
|
|
NTXEC_POWERKEEP_VALUE);
|
|
if (res < 0)
|
|
return res;
|
|
|
|
if (poweroff_restart_client)
|
|
/*
|
|
* Another instance of the driver already took
|
|
* poweroff/restart duties.
|
|
*/
|
|
dev_err(ec->dev, "poweroff_restart_client already assigned\n");
|
|
else
|
|
poweroff_restart_client = client;
|
|
|
|
if (pm_power_off)
|
|
/* Another driver already registered a poweroff handler. */
|
|
dev_err(ec->dev, "pm_power_off already assigned\n");
|
|
else
|
|
pm_power_off = ntxec_poweroff;
|
|
|
|
res = register_restart_handler(&ntxec_restart_handler);
|
|
if (res)
|
|
dev_err(ec->dev,
|
|
"Failed to register restart handler: %d\n", res);
|
|
}
|
|
|
|
i2c_set_clientdata(client, ec);
|
|
|
|
res = devm_mfd_add_devices(ec->dev, PLATFORM_DEVID_NONE,
|
|
subdevs, n_subdevs, NULL, 0, NULL);
|
|
if (res)
|
|
dev_err(ec->dev, "Failed to add subdevices: %d\n", res);
|
|
|
|
return res;
|
|
}
|
|
|
|
static int ntxec_remove(struct i2c_client *client)
|
|
{
|
|
if (client == poweroff_restart_client) {
|
|
poweroff_restart_client = NULL;
|
|
pm_power_off = NULL;
|
|
unregister_restart_handler(&ntxec_restart_handler);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id of_ntxec_match_table[] = {
|
|
{ .compatible = "netronix,ntxec", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_ntxec_match_table);
|
|
|
|
static struct i2c_driver ntxec_driver = {
|
|
.driver = {
|
|
.name = "ntxec",
|
|
.of_match_table = of_ntxec_match_table,
|
|
},
|
|
.probe_new = ntxec_probe,
|
|
.remove = ntxec_remove,
|
|
};
|
|
module_i2c_driver(ntxec_driver);
|
|
|
|
MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
|
|
MODULE_DESCRIPTION("Core driver for Netronix EC");
|
|
MODULE_LICENSE("GPL");
|