352 строки
9.0 KiB
C
352 строки
9.0 KiB
C
/*
|
|
* Modifications by Christian Pellegrin <chripell@evolware.org>
|
|
*
|
|
* s3c24xx_uda134x.c -- S3C24XX_UDA134X ALSA SoC Audio board driver
|
|
*
|
|
* Copyright 2007 Dension Audio Systems Ltd.
|
|
* Author: Zoltan Devai
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <sound/soc.h>
|
|
#include <sound/s3c24xx_uda134x.h>
|
|
|
|
#include <plat/regs-iis.h>
|
|
|
|
#include "s3c24xx-i2s.h"
|
|
|
|
/* #define ENFORCE_RATES 1 */
|
|
/*
|
|
Unfortunately the S3C24XX in master mode has a limited capacity of
|
|
generating the clock for the codec. If you define this only rates
|
|
that are really available will be enforced. But be careful, most
|
|
user level application just want the usual sampling frequencies (8,
|
|
11.025, 22.050, 44.1 kHz) and anyway resampling is a costly
|
|
operation for embedded systems. So if you aren't very lucky or your
|
|
hardware engineer wasn't very forward-looking it's better to leave
|
|
this undefined. If you do so an approximate value for the requested
|
|
sampling rate in the range -/+ 5% will be chosen. If this in not
|
|
possible an error will be returned.
|
|
*/
|
|
|
|
static struct clk *xtal;
|
|
static struct clk *pclk;
|
|
/* this is need because we don't have a place where to keep the
|
|
* pointers to the clocks in each substream. We get the clocks only
|
|
* when we are actually using them so we don't block stuff like
|
|
* frequency change or oscillator power-off */
|
|
static int clk_users;
|
|
static DEFINE_MUTEX(clk_lock);
|
|
|
|
static unsigned int rates[33 * 2];
|
|
#ifdef ENFORCE_RATES
|
|
static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
|
|
.count = ARRAY_SIZE(rates),
|
|
.list = rates,
|
|
.mask = 0,
|
|
};
|
|
#endif
|
|
|
|
static struct platform_device *s3c24xx_uda134x_snd_device;
|
|
|
|
static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream)
|
|
{
|
|
int ret = 0;
|
|
#ifdef ENFORCE_RATES
|
|
struct snd_pcm_runtime *runtime = substream->runtime;
|
|
#endif
|
|
|
|
mutex_lock(&clk_lock);
|
|
pr_debug("%s %d\n", __func__, clk_users);
|
|
if (clk_users == 0) {
|
|
xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal");
|
|
if (IS_ERR(xtal)) {
|
|
printk(KERN_ERR "%s cannot get xtal\n", __func__);
|
|
ret = PTR_ERR(xtal);
|
|
} else {
|
|
pclk = clk_get(&s3c24xx_uda134x_snd_device->dev,
|
|
"pclk");
|
|
if (IS_ERR(pclk)) {
|
|
printk(KERN_ERR "%s cannot get pclk\n",
|
|
__func__);
|
|
clk_put(xtal);
|
|
ret = PTR_ERR(pclk);
|
|
}
|
|
}
|
|
if (!ret) {
|
|
int i, j;
|
|
|
|
for (i = 0; i < 2; i++) {
|
|
int fs = i ? 256 : 384;
|
|
|
|
rates[i*33] = clk_get_rate(xtal) / fs;
|
|
for (j = 1; j < 33; j++)
|
|
rates[i*33 + j] = clk_get_rate(pclk) /
|
|
(j * fs);
|
|
}
|
|
}
|
|
}
|
|
clk_users += 1;
|
|
mutex_unlock(&clk_lock);
|
|
if (!ret) {
|
|
#ifdef ENFORCE_RATES
|
|
ret = snd_pcm_hw_constraint_list(runtime, 0,
|
|
SNDRV_PCM_HW_PARAM_RATE,
|
|
&hw_constraints_rates);
|
|
if (ret < 0)
|
|
printk(KERN_ERR "%s cannot set constraints\n",
|
|
__func__);
|
|
#endif
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream)
|
|
{
|
|
mutex_lock(&clk_lock);
|
|
pr_debug("%s %d\n", __func__, clk_users);
|
|
clk_users -= 1;
|
|
if (clk_users == 0) {
|
|
clk_put(xtal);
|
|
xtal = NULL;
|
|
clk_put(pclk);
|
|
pclk = NULL;
|
|
}
|
|
mutex_unlock(&clk_lock);
|
|
}
|
|
|
|
static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_dai *codec_dai = rtd->codec_dai;
|
|
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
|
|
unsigned int clk = 0;
|
|
int ret = 0;
|
|
int clk_source, fs_mode;
|
|
unsigned long rate = params_rate(params);
|
|
long err, cerr;
|
|
unsigned int div;
|
|
int i, bi;
|
|
|
|
err = 999999;
|
|
bi = 0;
|
|
for (i = 0; i < 2*33; i++) {
|
|
cerr = rates[i] - rate;
|
|
if (cerr < 0)
|
|
cerr = -cerr;
|
|
if (cerr < err) {
|
|
err = cerr;
|
|
bi = i;
|
|
}
|
|
}
|
|
if (bi / 33 == 1)
|
|
fs_mode = S3C2410_IISMOD_256FS;
|
|
else
|
|
fs_mode = S3C2410_IISMOD_384FS;
|
|
if (bi % 33 == 0) {
|
|
clk_source = S3C24XX_CLKSRC_MPLL;
|
|
div = 1;
|
|
} else {
|
|
clk_source = S3C24XX_CLKSRC_PCLK;
|
|
div = bi % 33;
|
|
}
|
|
pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi);
|
|
|
|
clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate;
|
|
pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__,
|
|
fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS",
|
|
clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK",
|
|
div, clk, err);
|
|
|
|
if ((err * 100 / rate) > 5) {
|
|
printk(KERN_ERR "S3C24XX_UDA134X: effective frequency "
|
|
"too different from desired (%ld%%)\n",
|
|
err * 100 / rate);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
|
|
SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk,
|
|
SND_SOC_CLOCK_IN);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
|
|
S3C2410_IISMOD_32FS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
|
|
S3C24XX_PRESCALE(div, div));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* set the codec system clock for DAC and ADC */
|
|
ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
|
|
SND_SOC_CLOCK_OUT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_ops s3c24xx_uda134x_ops = {
|
|
.startup = s3c24xx_uda134x_startup,
|
|
.shutdown = s3c24xx_uda134x_shutdown,
|
|
.hw_params = s3c24xx_uda134x_hw_params,
|
|
};
|
|
|
|
static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = {
|
|
.name = "UDA134X",
|
|
.stream_name = "UDA134X",
|
|
.codec_name = "uda134x-codec",
|
|
.codec_dai_name = "uda134x-hifi",
|
|
.cpu_dai_name = "s3c24xx-iis",
|
|
.ops = &s3c24xx_uda134x_ops,
|
|
.platform_name = "samsung-audio",
|
|
};
|
|
|
|
static struct snd_soc_card snd_soc_s3c24xx_uda134x = {
|
|
.name = "S3C24XX_UDA134X",
|
|
.owner = THIS_MODULE,
|
|
.dai_link = &s3c24xx_uda134x_dai_link,
|
|
.num_links = 1,
|
|
};
|
|
|
|
static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins;
|
|
|
|
static void setdat(int v)
|
|
{
|
|
gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0);
|
|
}
|
|
|
|
static void setclk(int v)
|
|
{
|
|
gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0);
|
|
}
|
|
|
|
static void setmode(int v)
|
|
{
|
|
gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0);
|
|
}
|
|
|
|
/* FIXME - This must be codec platform data but in which board file ?? */
|
|
static struct uda134x_platform_data s3c24xx_uda134x = {
|
|
.l3 = {
|
|
.setdat = setdat,
|
|
.setclk = setclk,
|
|
.setmode = setmode,
|
|
.data_hold = 1,
|
|
.data_setup = 1,
|
|
.clock_high = 1,
|
|
.mode_hold = 1,
|
|
.mode = 1,
|
|
.mode_setup = 1,
|
|
},
|
|
};
|
|
|
|
static int s3c24xx_uda134x_setup_pin(int pin, char *fun)
|
|
{
|
|
if (gpio_request(pin, "s3c24xx_uda134x") < 0) {
|
|
printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
|
|
"l3 %s pin already in use", fun);
|
|
return -EBUSY;
|
|
}
|
|
gpio_direction_output(pin, 0);
|
|
return 0;
|
|
}
|
|
|
|
static int s3c24xx_uda134x_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n");
|
|
|
|
s3c24xx_uda134x_l3_pins = pdev->dev.platform_data;
|
|
if (s3c24xx_uda134x_l3_pins == NULL) {
|
|
printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
|
|
"unable to find platform data\n");
|
|
return -ENODEV;
|
|
}
|
|
s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power;
|
|
s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model;
|
|
|
|
if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data,
|
|
"data") < 0)
|
|
return -EBUSY;
|
|
if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk,
|
|
"clk") < 0) {
|
|
gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
|
|
return -EBUSY;
|
|
}
|
|
if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode,
|
|
"mode") < 0) {
|
|
gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
|
|
gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
|
|
return -EBUSY;
|
|
}
|
|
|
|
s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1);
|
|
if (!s3c24xx_uda134x_snd_device) {
|
|
printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
|
|
"Unable to register\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
platform_set_drvdata(s3c24xx_uda134x_snd_device,
|
|
&snd_soc_s3c24xx_uda134x);
|
|
platform_device_add_data(s3c24xx_uda134x_snd_device, &s3c24xx_uda134x, sizeof(s3c24xx_uda134x));
|
|
ret = platform_device_add(s3c24xx_uda134x_snd_device);
|
|
if (ret) {
|
|
printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n");
|
|
platform_device_put(s3c24xx_uda134x_snd_device);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int s3c24xx_uda134x_remove(struct platform_device *pdev)
|
|
{
|
|
platform_device_unregister(s3c24xx_uda134x_snd_device);
|
|
gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
|
|
gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
|
|
gpio_free(s3c24xx_uda134x_l3_pins->l3_mode);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver s3c24xx_uda134x_driver = {
|
|
.probe = s3c24xx_uda134x_probe,
|
|
.remove = s3c24xx_uda134x_remove,
|
|
.driver = {
|
|
.name = "s3c24xx_uda134x",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(s3c24xx_uda134x_driver);
|
|
|
|
MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>");
|
|
MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver");
|
|
MODULE_LICENSE("GPL");
|