365 строки
8.8 KiB
C
365 строки
8.8 KiB
C
/*
|
|
* OHCI HCD (Host Controller Driver) for USB.
|
|
*
|
|
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
|
|
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
|
|
*
|
|
* [ Initialisation is based on Linus' ]
|
|
* [ uhci code and gregs ohci fragments ]
|
|
* [ (C) Copyright 1999 Linus Torvalds ]
|
|
* [ (C) Copyright 1999 Gregory P. Smith]
|
|
*
|
|
* PCI Bus Glue
|
|
*
|
|
* This file is licenced under the GPL.
|
|
*/
|
|
|
|
#ifndef CONFIG_PCI
|
|
#error "This file is PCI bus glue. CONFIG_PCI must be defined."
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int broken_suspend(struct usb_hcd *hcd)
|
|
{
|
|
device_init_wakeup(&hcd->self.root_hub->dev, 0);
|
|
return 0;
|
|
}
|
|
|
|
/* AMD 756, for most chips (early revs), corrupts register
|
|
* values on read ... so enable the vendor workaround.
|
|
*/
|
|
static int ohci_quirk_amd756(struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
|
|
ohci->flags = OHCI_QUIRK_AMD756;
|
|
ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
|
|
|
|
/* also erratum 10 (suspend/resume issues) */
|
|
return broken_suspend(hcd);
|
|
}
|
|
|
|
/* Apple's OHCI driver has a lot of bizarre workarounds
|
|
* for this chip. Evidently control and bulk lists
|
|
* can get confused. (B&W G3 models, and ...)
|
|
*/
|
|
static int ohci_quirk_opti(struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
|
|
ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Check for NSC87560. We have to look at the bridge (fn1) to
|
|
* identify the USB (fn2). This quirk might apply to more or
|
|
* even all NSC stuff.
|
|
*/
|
|
static int ohci_quirk_ns(struct usb_hcd *hcd)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
|
|
struct pci_dev *b;
|
|
|
|
b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
|
|
if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
|
|
&& b->vendor == PCI_VENDOR_ID_NS) {
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
|
|
ohci->flags |= OHCI_QUIRK_SUPERIO;
|
|
ohci_dbg (ohci, "Using NSC SuperIO setup\n");
|
|
}
|
|
pci_dev_put(b);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Check for Compaq's ZFMicro chipset, which needs short
|
|
* delays before control or bulk queues get re-activated
|
|
* in finish_unlinks()
|
|
*/
|
|
static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
|
|
ohci->flags |= OHCI_QUIRK_ZFMICRO;
|
|
ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Check for Toshiba SCC OHCI which has big endian registers
|
|
* and little endian in memory data structures
|
|
*/
|
|
static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
|
|
/* That chip is only present in the southbridge of some
|
|
* cell based platforms which are supposed to select
|
|
* CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
|
|
* that was the case though.
|
|
*/
|
|
#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
|
|
ohci->flags |= OHCI_QUIRK_BE_MMIO;
|
|
ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
|
|
return 0;
|
|
#else
|
|
ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
|
|
return -ENXIO;
|
|
#endif
|
|
}
|
|
|
|
/* Check for NEC chip and apply quirk for allegedly lost interrupts.
|
|
*/
|
|
|
|
static void ohci_quirk_nec_worker(struct work_struct *work)
|
|
{
|
|
struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
|
|
int status;
|
|
|
|
status = ohci_init(ohci);
|
|
if (status != 0) {
|
|
ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
|
|
"ohci_init", status);
|
|
return;
|
|
}
|
|
|
|
status = ohci_restart(ohci);
|
|
if (status != 0)
|
|
ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
|
|
"ohci_restart", status);
|
|
}
|
|
|
|
static int ohci_quirk_nec(struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
|
|
ohci->flags |= OHCI_QUIRK_NEC;
|
|
INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
|
|
ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* List of quirks for OHCI */
|
|
static const struct pci_device_id ohci_pci_quirks[] = {
|
|
{
|
|
PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
|
|
.driver_data = (unsigned long)ohci_quirk_amd756,
|
|
},
|
|
{
|
|
PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
|
|
.driver_data = (unsigned long)ohci_quirk_opti,
|
|
},
|
|
{
|
|
PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
|
|
.driver_data = (unsigned long)ohci_quirk_ns,
|
|
},
|
|
{
|
|
PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
|
|
.driver_data = (unsigned long)ohci_quirk_zfmicro,
|
|
},
|
|
{
|
|
PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
|
|
.driver_data = (unsigned long)ohci_quirk_toshiba_scc,
|
|
},
|
|
{
|
|
PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
|
|
.driver_data = (unsigned long)ohci_quirk_nec,
|
|
},
|
|
{
|
|
/* Toshiba portege 4000 */
|
|
.vendor = PCI_VENDOR_ID_AL,
|
|
.device = 0x5237,
|
|
.subvendor = PCI_VENDOR_ID_TOSHIBA,
|
|
.subdevice = 0x0004,
|
|
.driver_data = (unsigned long) broken_suspend,
|
|
},
|
|
{
|
|
PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
|
|
.driver_data = (unsigned long) broken_suspend,
|
|
},
|
|
/* FIXME for some of the early AMD 760 southbridges, OHCI
|
|
* won't work at all. blacklist them.
|
|
*/
|
|
|
|
{},
|
|
};
|
|
|
|
static int ohci_pci_reset (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
int ret = 0;
|
|
|
|
if (hcd->self.controller) {
|
|
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
|
|
const struct pci_device_id *quirk_id;
|
|
|
|
quirk_id = pci_match_id(ohci_pci_quirks, pdev);
|
|
if (quirk_id != NULL) {
|
|
int (*quirk)(struct usb_hcd *ohci);
|
|
quirk = (void *)quirk_id->driver_data;
|
|
ret = quirk(hcd);
|
|
}
|
|
}
|
|
if (ret == 0) {
|
|
ohci_hcd_init (ohci);
|
|
return ohci_init (ohci);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
|
|
static int __devinit ohci_pci_start (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
int ret;
|
|
|
|
#ifdef CONFIG_PM /* avoid warnings about unused pdev */
|
|
if (hcd->self.controller) {
|
|
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
|
|
|
|
/* RWC may not be set for add-in PCI cards, since boot
|
|
* firmware probably ignored them. This transfers PCI
|
|
* PM wakeup capabilities (once the PCI layer is fixed).
|
|
*/
|
|
if (device_may_wakeup(&pdev->dev))
|
|
ohci->hc_control |= OHCI_CTRL_RWC;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
ret = ohci_run (ohci);
|
|
if (ret < 0) {
|
|
ohci_err (ohci, "can't start\n");
|
|
ohci_stop (hcd);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int ohci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
unsigned long flags;
|
|
int rc = 0;
|
|
|
|
/* Root hub was already suspended. Disable irq emission and
|
|
* mark HW unaccessible, bail out if RH has been resumed. Use
|
|
* the spinlock to properly synchronize with possible pending
|
|
* RH suspend or resume activity.
|
|
*
|
|
* This is still racy as hcd->state is manipulated outside of
|
|
* any locks =P But that will be a different fix.
|
|
*/
|
|
spin_lock_irqsave (&ohci->lock, flags);
|
|
if (hcd->state != HC_STATE_SUSPENDED) {
|
|
rc = -EINVAL;
|
|
goto bail;
|
|
}
|
|
ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
|
|
(void)ohci_readl(ohci, &ohci->regs->intrdisable);
|
|
|
|
/* make sure snapshot being resumed re-enumerates everything */
|
|
if (message.event == PM_EVENT_PRETHAW)
|
|
ohci_usb_reset(ohci);
|
|
|
|
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
bail:
|
|
spin_unlock_irqrestore (&ohci->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
static int ohci_pci_resume (struct usb_hcd *hcd)
|
|
{
|
|
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
ohci_finish_controller_resume(hcd);
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static const struct hc_driver ohci_pci_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "OHCI Host Controller",
|
|
.hcd_priv_size = sizeof(struct ohci_hcd),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
.irq = ohci_irq,
|
|
.flags = HCD_MEMORY | HCD_USB11,
|
|
|
|
/*
|
|
* basic lifecycle operations
|
|
*/
|
|
.reset = ohci_pci_reset,
|
|
.start = ohci_pci_start,
|
|
.stop = ohci_stop,
|
|
.shutdown = ohci_shutdown,
|
|
|
|
#ifdef CONFIG_PM
|
|
.pci_suspend = ohci_pci_suspend,
|
|
.pci_resume = ohci_pci_resume,
|
|
#endif
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = ohci_urb_enqueue,
|
|
.urb_dequeue = ohci_urb_dequeue,
|
|
.endpoint_disable = ohci_endpoint_disable,
|
|
|
|
/*
|
|
* scheduling support
|
|
*/
|
|
.get_frame_number = ohci_get_frame,
|
|
|
|
/*
|
|
* root hub support
|
|
*/
|
|
.hub_status_data = ohci_hub_status_data,
|
|
.hub_control = ohci_hub_control,
|
|
.hub_irq_enable = ohci_rhsc_enable,
|
|
#ifdef CONFIG_PM
|
|
.bus_suspend = ohci_bus_suspend,
|
|
.bus_resume = ohci_bus_resume,
|
|
#endif
|
|
.start_port_reset = ohci_start_port_reset,
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
|
|
static const struct pci_device_id pci_ids [] = { {
|
|
/* handle any USB OHCI controller */
|
|
PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
|
|
.driver_data = (unsigned long) &ohci_pci_hc_driver,
|
|
}, { /* end: all zeroes */ }
|
|
};
|
|
MODULE_DEVICE_TABLE (pci, pci_ids);
|
|
|
|
/* pci driver glue; this is a "new style" PCI driver module */
|
|
static struct pci_driver ohci_pci_driver = {
|
|
.name = (char *) hcd_name,
|
|
.id_table = pci_ids,
|
|
|
|
.probe = usb_hcd_pci_probe,
|
|
.remove = usb_hcd_pci_remove,
|
|
|
|
#ifdef CONFIG_PM
|
|
.suspend = usb_hcd_pci_suspend,
|
|
.resume = usb_hcd_pci_resume,
|
|
#endif
|
|
|
|
.shutdown = usb_hcd_pci_shutdown,
|
|
};
|
|
|