282 строки
6.9 KiB
Plaintext
282 строки
6.9 KiB
Plaintext
/*
|
|
* Device Tree Source for mangOH Green Board with WP8548 Module
|
|
*
|
|
* Copyright (C) 2016 BayLibre, SAS.
|
|
* Author : Neil Armstrong <narmstrong@baylibre.com>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
#include "qcom-mdm9615-wp8548.dtsi"
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
model = "MangOH Green with WP8548 Module";
|
|
compatible = "swir,mangoh-green-wp8548", "swir,wp8548", "qcom,mdm9615";
|
|
|
|
aliases {
|
|
spi0 = &gsbi3_spi;
|
|
serial0 = &gsbi4_serial;
|
|
serial1 = &gsbi5_serial;
|
|
i2c0 = &gsbi5_i2c;
|
|
mmc0 = &sdcc1;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial1:115200n8";
|
|
};
|
|
};
|
|
|
|
&msmgpio {
|
|
/* MangOH GPIO Mapping :
|
|
* - 2 : GPIOEXP_INT2
|
|
* - 7 : IOT1_GPIO2
|
|
* - 8 : IOT0_GPIO4
|
|
* - 13: IOT0_GPIO3
|
|
* - 21: IOT1_GPIO4
|
|
* - 22: IOT2_GPIO1
|
|
* - 23: IOT2_GPIO2
|
|
* - 24: IOT2_GPIO3
|
|
* - 25: IOT1_GPIO1
|
|
* - 32: IOT1_GPIO3
|
|
* - 33: IOT0_GPIO2
|
|
* - 42: IOT0_GPIO1 and SD Card Detect
|
|
*/
|
|
|
|
gpioext1_pins: gpioext1_pins {
|
|
pins {
|
|
pins = "gpio2";
|
|
function = "gpio";
|
|
input-enable;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
sdc_cd_pins: sdc_cd_pins {
|
|
pins {
|
|
pins = "gpio42";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gsbi3_spi {
|
|
spi@0 {
|
|
compatible = "swir,mangoh-iotport-spi", "spidev";
|
|
spi-max-frequency = <24000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
&gsbi5_i2c {
|
|
mux@71 {
|
|
compatible = "nxp,pca9548";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x71>;
|
|
|
|
i2c_iot0: i2c@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
};
|
|
|
|
i2c_iot1: i2c@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
};
|
|
|
|
i2c_iot2: i2c@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
};
|
|
|
|
i2c@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
|
|
usbhub: hub@8 {
|
|
compatible = "smsc,usb3503a";
|
|
reg = <0x8>;
|
|
connect-gpios = <&gpioext2 1 GPIO_ACTIVE_HIGH>;
|
|
intn-gpios = <&gpioext2 0 GPIO_ACTIVE_HIGH>;
|
|
initial-mode = <1>;
|
|
};
|
|
};
|
|
|
|
i2c@4 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <4>;
|
|
|
|
gpioext0: gpio@3e {
|
|
/* GPIO Expander 0 Mapping :
|
|
* - 0: ARDUINO_RESET_Level shift
|
|
* - 1: BattChrgr_PG_N
|
|
* - 2: BattGauge_GPIO
|
|
* - 3: LED_ON (out active high)
|
|
* - 4: ATmega_reset_GPIO
|
|
* - 5: X
|
|
* - 6: PCM_ANALOG_SELECT (out active high)
|
|
* - 7: X
|
|
* - 8: Board_rev_res1 (in)
|
|
* - 9: Board_rev_res2 (in)
|
|
* - 10: UART_EXP1_ENn (out active low / pull-down)
|
|
* - 11: UART_EXP1_IN (out pull-down)
|
|
* - 12: UART_EXP2_IN (out pull-down)
|
|
* - 13: SDIO_SEL (out pull-down)
|
|
* - 14: SPI_EXP1_ENn (out active low / pull-down)
|
|
* - 15: SPI_EXP1_IN (out pull-down)
|
|
*/
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "semtech,sx1509q";
|
|
reg = <0x3e>;
|
|
interrupt-parent = <&gpioext1>;
|
|
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
probe-reset;
|
|
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
};
|
|
};
|
|
|
|
i2c@5 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <5>;
|
|
|
|
gpioext1: gpio@3f {
|
|
/* GPIO Expander 1 Mapping :
|
|
* - 0: GPIOEXP_INT1
|
|
* - 1: Battery detect
|
|
* - 2: GPIO_SCF3_RESET
|
|
* - 3: LED_CARD_DETECT_IOT0 (in)
|
|
* - 4: LED_CARD_DETECT_IOT1 (in)
|
|
* - 5: LED_CARD_DETECT_IOT2 (in)
|
|
* - 6: UIM2_PWM_SELECT
|
|
* - 7: UIM2_M2_S_SELECT
|
|
* - 8: TP900
|
|
* - 9: SENSOR_INT1 (in)
|
|
* - 10: SENSOR_INT2 (in)
|
|
* - 11: CARD_DETECT_IOT0 (in pull-up)
|
|
* - 12: CARD_DETECT_IOT2 (in pull-up)
|
|
* - 13: CARD_DETECT_IOT1 (in pull-up)
|
|
* - 14: GPIOEXP_INT3 (in active low / pull-up)
|
|
* - 15: BattChrgr_INT_N
|
|
*/
|
|
pinctrl-0 = <&gpioext1_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "semtech,sx1509q";
|
|
reg = <0x3f>;
|
|
interrupt-parent = <&msmgpio>;
|
|
interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
probe-reset;
|
|
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
};
|
|
};
|
|
|
|
i2c@6 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <6>;
|
|
|
|
gpioext2: gpio@70 {
|
|
/* GPIO Expander 2 Mapping :
|
|
* - 0: USB_HUB_INTn
|
|
* - 1: HUB_CONNECT
|
|
* - 2: GPIO_IOT2_RESET (out active low / pull-up)
|
|
* - 3: GPIO_IOT1_RESET (out active low / pull-up)
|
|
* - 4: GPIO_IOT0_RESET (out active low / pull-up)
|
|
* - 5: TP901
|
|
* - 6: TP902
|
|
* - 7: TP903
|
|
* - 8: UART_EXP2_ENn (out active low / pull-down)
|
|
* - 9: PCM_EXP1_ENn (out active low)
|
|
* - 10: PCM_EXP1_SEL (out)
|
|
* - 11: ARD_FTDI
|
|
* - 12: TP904
|
|
* - 13: TP905
|
|
* - 14: TP906
|
|
* - 15: RS232_Enable (out active high / pull-up)
|
|
*/
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
compatible = "semtech,sx1509q";
|
|
reg = <0x70>;
|
|
interrupt-parent = <&gpioext1>;
|
|
interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
probe-reset;
|
|
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
};
|
|
};
|
|
|
|
i2c@7 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <7>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdcc1 {
|
|
pinctrl-0 = <&sdc_cd_pins>;
|
|
pinctrl-names = "default";
|
|
disable-wp;
|
|
cd-gpios = <&msmgpio 42 GPIO_ACTIVE_LOW>; /* Active low CD */
|
|
};
|