457 строки
12 KiB
C
457 строки
12 KiB
C
/* pci-vdk.c: MB93090-MB00 (VDK) PCI support
|
|
*
|
|
* Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved.
|
|
* Written by David Howells (dhowells@redhat.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/segment.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mb-regs.h>
|
|
#include <asm/mb86943a.h>
|
|
#include "pci-frv.h"
|
|
|
|
unsigned int __nongpreldata pci_probe = 1;
|
|
|
|
int __nongpreldata pcibios_last_bus = -1;
|
|
struct pci_bus *__nongpreldata pci_root_bus;
|
|
struct pci_ops *__nongpreldata pci_root_ops;
|
|
|
|
/*
|
|
* The accessible PCI window does not cover the entire CPU address space, but
|
|
* there are devices we want to access outside of that window, so we need to
|
|
* insert specific PCI bus resources instead of using the platform-level bus
|
|
* resources directly for the PCI root bus.
|
|
*
|
|
* These are configured and inserted by pcibios_init() and are attached to the
|
|
* root bus by pcibios_fixup_bus().
|
|
*/
|
|
static struct resource pci_ioport_resource = {
|
|
.name = "PCI IO",
|
|
.start = 0,
|
|
.end = IO_SPACE_LIMIT,
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
|
|
static struct resource pci_iomem_resource = {
|
|
.name = "PCI mem",
|
|
.start = 0,
|
|
.end = -1,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
/*
|
|
* Functions for accessing PCI configuration space
|
|
*/
|
|
|
|
#define CONFIG_CMD(bus, dev, where) \
|
|
(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
|
|
|
|
#define __set_PciCfgAddr(A) writel((A), (volatile void __iomem *) __region_CS1 + 0x80)
|
|
|
|
#define __get_PciCfgDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3))
|
|
#define __get_PciCfgDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2))
|
|
#define __get_PciCfgDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x88)
|
|
|
|
#define __set_PciCfgDataB(A,V) \
|
|
writeb((V), (volatile void __iomem *) __region_CS1 + 0x88 + (3 - ((A) & 3)))
|
|
|
|
#define __set_PciCfgDataW(A,V) \
|
|
writew((V), (volatile void __iomem *) __region_CS1 + 0x88 + (2 - ((A) & 2)))
|
|
|
|
#define __set_PciCfgDataL(A,V) \
|
|
writel((V), (volatile void __iomem *) __region_CS1 + 0x88)
|
|
|
|
#define __get_PciBridgeDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x800 + (A))
|
|
#define __get_PciBridgeDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x800 + (A))
|
|
#define __get_PciBridgeDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x800 + (A))
|
|
|
|
#define __set_PciBridgeDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
|
|
#define __set_PciBridgeDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
|
|
#define __set_PciBridgeDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A))
|
|
|
|
static inline int __query(const struct pci_dev *dev)
|
|
{
|
|
// return dev->bus->number==0 && (dev->devfn==PCI_DEVFN(0,0));
|
|
// return dev->bus->number==1;
|
|
// return dev->bus->number==0 &&
|
|
// (dev->devfn==PCI_DEVFN(2,0) || dev->devfn==PCI_DEVFN(3,0));
|
|
return 0;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
/*
|
|
*
|
|
*/
|
|
static int pci_frv_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
|
|
u32 *val)
|
|
{
|
|
u32 _value;
|
|
|
|
if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
|
|
_value = __get_PciBridgeDataL(where & ~3);
|
|
}
|
|
else {
|
|
__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
|
|
_value = __get_PciCfgDataL(where & ~3);
|
|
}
|
|
|
|
switch (size) {
|
|
case 1:
|
|
_value = _value >> ((where & 3) * 8);
|
|
break;
|
|
|
|
case 2:
|
|
_value = _value >> ((where & 2) * 8);
|
|
break;
|
|
|
|
case 4:
|
|
break;
|
|
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
*val = _value;
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int pci_frv_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size,
|
|
u32 value)
|
|
{
|
|
switch (size) {
|
|
case 1:
|
|
if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
|
|
__set_PciBridgeDataB(where, value);
|
|
}
|
|
else {
|
|
__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
|
|
__set_PciCfgDataB(where, value);
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
|
|
__set_PciBridgeDataW(where, value);
|
|
}
|
|
else {
|
|
__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
|
|
__set_PciCfgDataW(where, value);
|
|
}
|
|
break;
|
|
|
|
case 4:
|
|
if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) {
|
|
__set_PciBridgeDataL(where, value);
|
|
}
|
|
else {
|
|
__set_PciCfgAddr(CONFIG_CMD(bus, devfn, where));
|
|
__set_PciCfgDataL(where, value);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops pci_direct_frv = {
|
|
pci_frv_read_config,
|
|
pci_frv_write_config,
|
|
};
|
|
|
|
/*
|
|
* Before we decide to use direct hardware access mechanisms, we try to do some
|
|
* trivial checks to ensure it at least _seems_ to be working -- we just test
|
|
* whether bus 00 contains a host bridge (this is similar to checking
|
|
* techniques used in XFree86, but ours should be more reliable since we
|
|
* attempt to make use of direct access hints provided by the PCI BIOS).
|
|
*
|
|
* This should be close to trivial, but it isn't, because there are buggy
|
|
* chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID.
|
|
*/
|
|
static int __init pci_sanity_check(struct pci_ops *o)
|
|
{
|
|
struct pci_bus bus; /* Fake bus and device */
|
|
u32 id;
|
|
|
|
bus.number = 0;
|
|
|
|
if (o->read(&bus, 0, PCI_VENDOR_ID, 4, &id) == PCIBIOS_SUCCESSFUL) {
|
|
printk("PCI: VDK Bridge device:vendor: %08x\n", id);
|
|
if (id == 0x200e10cf)
|
|
return 1;
|
|
}
|
|
|
|
printk("PCI: VDK Bridge: Sanity check failed\n");
|
|
return 0;
|
|
}
|
|
|
|
static struct pci_ops * __init pci_check_direct(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* check if access works */
|
|
if (pci_sanity_check(&pci_direct_frv)) {
|
|
local_irq_restore(flags);
|
|
printk("PCI: Using configuration frv\n");
|
|
// request_mem_region(0xBE040000, 256, "FRV bridge");
|
|
// request_mem_region(0xBFFFFFF4, 12, "PCI frv");
|
|
return &pci_direct_frv;
|
|
}
|
|
|
|
local_irq_restore(flags);
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Discover remaining PCI buses in case there are peer host bridges.
|
|
* We use the number of last PCI bus provided by the PCI BIOS.
|
|
*/
|
|
static void __init pcibios_fixup_peer_bridges(void)
|
|
{
|
|
struct pci_bus bus;
|
|
struct pci_dev dev;
|
|
int n;
|
|
u16 l;
|
|
|
|
if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff)
|
|
return;
|
|
printk("PCI: Peer bridge fixup\n");
|
|
for (n=0; n <= pcibios_last_bus; n++) {
|
|
if (pci_find_bus(0, n))
|
|
continue;
|
|
bus.number = n;
|
|
bus.ops = pci_root_ops;
|
|
dev.bus = &bus;
|
|
for(dev.devfn=0; dev.devfn<256; dev.devfn += 8)
|
|
if (!pci_read_config_word(&dev, PCI_VENDOR_ID, &l) &&
|
|
l != 0x0000 && l != 0xffff) {
|
|
printk("Found device at %02x:%02x [%04x]\n", n, dev.devfn, l);
|
|
printk("PCI: Discovered peer bus %02x\n", n);
|
|
pci_scan_bus(n, pci_root_ops, NULL);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Exceptions for specific devices. Usually work-arounds for fatal design flaws.
|
|
*/
|
|
|
|
static void __init pci_fixup_umc_ide(struct pci_dev *d)
|
|
{
|
|
/*
|
|
* UM8886BF IDE controller sets region type bits incorrectly,
|
|
* therefore they look like memory despite of them being I/O.
|
|
*/
|
|
int i;
|
|
|
|
printk("PCI: Fixing base address flags for device %s\n", pci_name(d));
|
|
for(i=0; i<4; i++)
|
|
d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO;
|
|
}
|
|
|
|
static void __init pci_fixup_ide_bases(struct pci_dev *d)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* PCI IDE controllers use non-standard I/O port decoding, respect it.
|
|
*/
|
|
if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
|
|
return;
|
|
printk("PCI: IDE base address fixup for %s\n", pci_name(d));
|
|
for(i=0; i<4; i++) {
|
|
struct resource *r = &d->resource[i];
|
|
if ((r->start & ~0x80) == 0x374) {
|
|
r->start |= 2;
|
|
r->end = r->start;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void __init pci_fixup_ide_trash(struct pci_dev *d)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* There exist PCI IDE controllers which have utter garbage
|
|
* in first four base registers. Ignore that.
|
|
*/
|
|
printk("PCI: IDE base address trash cleared for %s\n", pci_name(d));
|
|
for(i=0; i<4; i++)
|
|
d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0;
|
|
}
|
|
|
|
static void __devinit pci_fixup_latency(struct pci_dev *d)
|
|
{
|
|
/*
|
|
* SiS 5597 and 5598 chipsets require latency timer set to
|
|
* at most 32 to avoid lockups.
|
|
*/
|
|
DBG("PCI: Setting max latency to 32\n");
|
|
pcibios_max_latency = 32;
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency);
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
|
|
|
|
/*
|
|
* Called after each bus is probed, but before its children
|
|
* are examined.
|
|
*/
|
|
|
|
void __init pcibios_fixup_bus(struct pci_bus *bus)
|
|
{
|
|
#if 0
|
|
printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
|
|
#endif
|
|
|
|
if (bus->number == 0) {
|
|
bus->resource[0] = &pci_ioport_resource;
|
|
bus->resource[1] = &pci_iomem_resource;
|
|
}
|
|
|
|
pci_read_bridge_bases(bus);
|
|
|
|
if (bus->number == 0) {
|
|
struct list_head *ln;
|
|
struct pci_dev *dev;
|
|
for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
|
|
dev = pci_dev_b(ln);
|
|
if (dev->devfn == 0) {
|
|
dev->resource[0].start = 0;
|
|
dev->resource[0].end = 0;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Initialization. Try all known PCI access methods. Note that we support
|
|
* using both PCI BIOS and direct access: in such cases, we use I/O ports
|
|
* to access config space, but we still keep BIOS order of cards to be
|
|
* compatible with 2.0.X. This should go away some day.
|
|
*/
|
|
|
|
int __init pcibios_init(void)
|
|
{
|
|
struct pci_ops *dir = NULL;
|
|
|
|
if (!mb93090_mb00_detected)
|
|
return -ENXIO;
|
|
|
|
__reg_MB86943_sl_ctl |= MB86943_SL_CTL_DRCT_MASTER_SWAP | MB86943_SL_CTL_DRCT_SLAVE_SWAP;
|
|
|
|
__reg_MB86943_ecs_base(1) = ((__region_CS2 + 0x01000000) >> 9) | 0x08000000;
|
|
__reg_MB86943_ecs_base(2) = ((__region_CS2 + 0x00000000) >> 9) | 0x08000000;
|
|
|
|
*(volatile uint32_t *) (__region_CS1 + 0x848) = 0xe0000000;
|
|
*(volatile uint32_t *) (__region_CS1 + 0x8b8) = 0x00000000;
|
|
|
|
__reg_MB86943_sl_pci_io_base = (__region_CS2 + 0x04000000) >> 9;
|
|
__reg_MB86943_sl_pci_mem_base = (__region_CS2 + 0x08000000) >> 9;
|
|
__reg_MB86943_pci_sl_io_base = __region_CS2 + 0x04000000;
|
|
__reg_MB86943_pci_sl_mem_base = __region_CS2 + 0x08000000;
|
|
mb();
|
|
|
|
/* enable PCI arbitration */
|
|
__reg_MB86943_pci_arbiter = MB86943_PCIARB_EN;
|
|
|
|
pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
|
|
pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
|
|
pci_ioport_resource.end += pci_ioport_resource.start;
|
|
|
|
printk("PCI IO window: %08llx-%08llx\n",
|
|
(unsigned long long) pci_ioport_resource.start,
|
|
(unsigned long long) pci_ioport_resource.end);
|
|
|
|
pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
|
|
pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
|
|
pci_iomem_resource.end += pci_iomem_resource.start;
|
|
|
|
/* Reserve somewhere to write to flush posted writes. This is used by
|
|
* __flush_PCI_writes() from asm/io.h to force the write FIFO in the
|
|
* CPU-PCI bridge to flush as this doesn't happen automatically when a
|
|
* read is performed on the MB93090 development kit motherboard.
|
|
*/
|
|
pci_iomem_resource.start += 0x400;
|
|
|
|
printk("PCI MEM window: %08llx-%08llx\n",
|
|
(unsigned long long) pci_iomem_resource.start,
|
|
(unsigned long long) pci_iomem_resource.end);
|
|
printk("PCI DMA memory: %08lx-%08lx\n",
|
|
dma_coherent_mem_start, dma_coherent_mem_end);
|
|
|
|
if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
|
|
panic("Unable to insert PCI IOMEM resource\n");
|
|
if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
|
|
panic("Unable to insert PCI IOPORT resource\n");
|
|
|
|
if (!pci_probe)
|
|
return -ENXIO;
|
|
|
|
dir = pci_check_direct();
|
|
if (dir)
|
|
pci_root_ops = dir;
|
|
else {
|
|
printk("PCI: No PCI bus detected\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
printk("PCI: Probing PCI hardware\n");
|
|
pci_root_bus = pci_scan_bus(0, pci_root_ops, NULL);
|
|
|
|
pcibios_irq_init();
|
|
pcibios_fixup_peer_bridges();
|
|
pcibios_fixup_irqs();
|
|
pcibios_resource_survey();
|
|
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(pcibios_init);
|
|
|
|
char * __init pcibios_setup(char *str)
|
|
{
|
|
if (!strcmp(str, "off")) {
|
|
pci_probe = 0;
|
|
return NULL;
|
|
} else if (!strncmp(str, "lastbus=", 8)) {
|
|
pcibios_last_bus = simple_strtol(str+8, NULL, 0);
|
|
return NULL;
|
|
}
|
|
return str;
|
|
}
|
|
|
|
int pcibios_enable_device(struct pci_dev *dev, int mask)
|
|
{
|
|
int err;
|
|
|
|
if ((err = pci_enable_resources(dev, mask)) < 0)
|
|
return err;
|
|
if (!dev->msi_enabled)
|
|
pcibios_enable_irq(dev);
|
|
return 0;
|
|
}
|