409 строки
9.6 KiB
C
409 строки
9.6 KiB
C
/*
|
|
* Board support file for OMAP4430 SDP.
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
*
|
|
* Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* Based on mach-omap2/board-3430sdp.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/i2c/twl.h>
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/omap4-common.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/board.h>
|
|
#include <plat/common.h>
|
|
#include <plat/control.h>
|
|
#include <plat/timer-gp.h>
|
|
#include <plat/usb.h>
|
|
#include <plat/mmc.h>
|
|
#include "hsmmc.h"
|
|
|
|
#define ETH_KS8851_IRQ 34
|
|
#define ETH_KS8851_POWER_ON 48
|
|
#define ETH_KS8851_QUART 138
|
|
|
|
static struct spi_board_info sdp4430_spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "ks8851",
|
|
.bus_num = 1,
|
|
.chip_select = 0,
|
|
.max_speed_hz = 24000000,
|
|
.irq = ETH_KS8851_IRQ,
|
|
},
|
|
};
|
|
|
|
static int omap_ethernet_init(void)
|
|
{
|
|
int status;
|
|
|
|
/* Request of GPIO lines */
|
|
|
|
status = gpio_request(ETH_KS8851_POWER_ON, "eth_power");
|
|
if (status) {
|
|
pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON);
|
|
return status;
|
|
}
|
|
|
|
status = gpio_request(ETH_KS8851_QUART, "quart");
|
|
if (status) {
|
|
pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART);
|
|
goto error1;
|
|
}
|
|
|
|
status = gpio_request(ETH_KS8851_IRQ, "eth_irq");
|
|
if (status) {
|
|
pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ);
|
|
goto error2;
|
|
}
|
|
|
|
/* Configuration of requested GPIO lines */
|
|
|
|
status = gpio_direction_output(ETH_KS8851_POWER_ON, 1);
|
|
if (status) {
|
|
pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ);
|
|
goto error3;
|
|
}
|
|
|
|
status = gpio_direction_output(ETH_KS8851_QUART, 1);
|
|
if (status) {
|
|
pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART);
|
|
goto error3;
|
|
}
|
|
|
|
status = gpio_direction_input(ETH_KS8851_IRQ);
|
|
if (status) {
|
|
pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ);
|
|
goto error3;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error3:
|
|
gpio_free(ETH_KS8851_IRQ);
|
|
error2:
|
|
gpio_free(ETH_KS8851_QUART);
|
|
error1:
|
|
gpio_free(ETH_KS8851_POWER_ON);
|
|
return status;
|
|
}
|
|
|
|
static struct platform_device sdp4430_lcd_device = {
|
|
.name = "sdp4430_lcd",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device *sdp4430_devices[] __initdata = {
|
|
&sdp4430_lcd_device,
|
|
};
|
|
|
|
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct omap_board_config_kernel sdp4430_config[] __initdata = {
|
|
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
|
|
};
|
|
|
|
static void __init omap_4430sdp_init_irq(void)
|
|
{
|
|
omap_board_config = sdp4430_config;
|
|
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
|
|
omap2_init_common_hw(NULL, NULL);
|
|
#ifdef CONFIG_OMAP_32K_TIMER
|
|
omap2_gp_clockevent_set_gptimer(1);
|
|
#endif
|
|
gic_init_irq();
|
|
omap_gpio_init();
|
|
}
|
|
|
|
static struct omap_musb_board_data musb_board_data = {
|
|
.interface_type = MUSB_INTERFACE_UTMI,
|
|
.mode = MUSB_PERIPHERAL,
|
|
.power = 100,
|
|
};
|
|
|
|
static struct omap2_hsmmc_info mmc[] = {
|
|
{
|
|
.mmc = 1,
|
|
.wires = 8,
|
|
.gpio_wp = -EINVAL,
|
|
},
|
|
{
|
|
.mmc = 2,
|
|
.wires = 8,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
.nonremovable = true,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static struct regulator_consumer_supply sdp4430_vmmc_supply[] = {
|
|
{
|
|
.supply = "vmmc",
|
|
.dev_name = "mmci-omap-hs.0",
|
|
},
|
|
{
|
|
.supply = "vmmc",
|
|
.dev_name = "mmci-omap-hs.1",
|
|
},
|
|
};
|
|
|
|
static int omap4_twl6030_hsmmc_late_init(struct device *dev)
|
|
{
|
|
int ret = 0;
|
|
struct platform_device *pdev = container_of(dev,
|
|
struct platform_device, dev);
|
|
struct omap_mmc_platform_data *pdata = dev->platform_data;
|
|
|
|
/* Setting MMC1 Card detect Irq */
|
|
if (pdev->id == 0)
|
|
pdata->slots[0].card_detect_irq = TWL6030_IRQ_BASE +
|
|
MMCDETECT_INTR_OFFSET;
|
|
return ret;
|
|
}
|
|
|
|
static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
|
|
{
|
|
struct omap_mmc_platform_data *pdata = dev->platform_data;
|
|
|
|
pdata->init = omap4_twl6030_hsmmc_late_init;
|
|
}
|
|
|
|
static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
|
|
{
|
|
struct omap2_hsmmc_info *c;
|
|
|
|
omap2_hsmmc_init(controllers);
|
|
for (c = controllers; c->mmc; c++)
|
|
omap4_twl6030_hsmmc_set_late_init(c->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct regulator_init_data sdp4430_vaux1 = {
|
|
.constraints = {
|
|
.min_uV = 1000000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vaux2 = {
|
|
.constraints = {
|
|
.min_uV = 1200000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vaux3 = {
|
|
.constraints = {
|
|
.min_uV = 1000000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
/* VMMC1 for MMC1 card */
|
|
static struct regulator_init_data sdp4430_vmmc = {
|
|
.constraints = {
|
|
.min_uV = 1200000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = 2,
|
|
.consumer_supplies = sdp4430_vmmc_supply,
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vpp = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 2500000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vusim = {
|
|
.constraints = {
|
|
.min_uV = 1200000,
|
|
.max_uV = 2900000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
|
|
| REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vana = {
|
|
.constraints = {
|
|
.min_uV = 2100000,
|
|
.max_uV = 2100000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vcxio = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vdac = {
|
|
.constraints = {
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data sdp4430_vusb = {
|
|
.constraints = {
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.apply_uV = true,
|
|
.valid_modes_mask = REGULATOR_MODE_NORMAL
|
|
| REGULATOR_MODE_STANDBY,
|
|
.valid_ops_mask = REGULATOR_CHANGE_MODE
|
|
| REGULATOR_CHANGE_STATUS,
|
|
},
|
|
};
|
|
|
|
static struct twl4030_platform_data sdp4430_twldata = {
|
|
.irq_base = TWL6030_IRQ_BASE,
|
|
.irq_end = TWL6030_IRQ_END,
|
|
|
|
/* Regulators */
|
|
.vmmc = &sdp4430_vmmc,
|
|
.vpp = &sdp4430_vpp,
|
|
.vusim = &sdp4430_vusim,
|
|
.vana = &sdp4430_vana,
|
|
.vcxio = &sdp4430_vcxio,
|
|
.vdac = &sdp4430_vdac,
|
|
.vusb = &sdp4430_vusb,
|
|
.vaux1 = &sdp4430_vaux1,
|
|
.vaux2 = &sdp4430_vaux2,
|
|
.vaux3 = &sdp4430_vaux3,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = {
|
|
{
|
|
I2C_BOARD_INFO("twl6030", 0x48),
|
|
.flags = I2C_CLIENT_WAKE,
|
|
.irq = OMAP44XX_IRQ_SYS_1N,
|
|
.platform_data = &sdp4430_twldata,
|
|
},
|
|
};
|
|
static int __init omap4_i2c_init(void)
|
|
{
|
|
/*
|
|
* Phoenix Audio IC needs I2C1 to
|
|
* start with 400 KHz or less
|
|
*/
|
|
omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo,
|
|
ARRAY_SIZE(sdp4430_i2c_boardinfo));
|
|
omap_register_i2c_bus(2, 400, NULL, 0);
|
|
omap_register_i2c_bus(3, 400, NULL, 0);
|
|
omap_register_i2c_bus(4, 400, NULL, 0);
|
|
return 0;
|
|
}
|
|
static void __init omap_4430sdp_init(void)
|
|
{
|
|
int status;
|
|
|
|
omap4_i2c_init();
|
|
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
|
|
omap_serial_init();
|
|
omap4_twl6030_hsmmc_init(mmc);
|
|
/* OMAP4 SDP uses internal transceiver so register nop transceiver */
|
|
usb_nop_xceiv_register();
|
|
/* FIXME: allow multi-omap to boot until musb is updated for omap4 */
|
|
if (!cpu_is_omap44xx())
|
|
usb_musb_init(&musb_board_data);
|
|
|
|
status = omap_ethernet_init();
|
|
if (status) {
|
|
pr_err("Ethernet initialization failed: %d\n", status);
|
|
} else {
|
|
sdp4430_spi_board_info[0].irq = gpio_to_irq(ETH_KS8851_IRQ);
|
|
spi_register_board_info(sdp4430_spi_board_info,
|
|
ARRAY_SIZE(sdp4430_spi_board_info));
|
|
}
|
|
}
|
|
|
|
static void __init omap_4430sdp_map_io(void)
|
|
{
|
|
omap2_set_globals_443x();
|
|
omap44xx_map_common_io();
|
|
}
|
|
|
|
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
|
|
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
|
|
.phys_io = 0x48000000,
|
|
.io_pg_offst = ((0xfa000000) >> 18) & 0xfffc,
|
|
.boot_params = 0x80000100,
|
|
.map_io = omap_4430sdp_map_io,
|
|
.init_irq = omap_4430sdp_init_irq,
|
|
.init_machine = omap_4430sdp_init,
|
|
.timer = &omap_timer,
|
|
MACHINE_END
|