WSL2-Linux-Kernel/drivers/sbus/char/aurora.h

277 строки
9.8 KiB
C

/* $Id: aurora.h,v 1.6 2001/06/05 12:23:38 davem Exp $
* linux/drivers/sbus/char/aurora.h -- Aurora multiport driver
*
* Copyright (c) 1999 by Oliver Aldulea (oli@bv.ro)
*
* This code is based on the RISCom/8 multiport serial driver written
* by Dmitry Gorodchanin (pgmdsg@ibi.com), based on the Linux serial
* driver, written by Linus Torvalds, Theodore T'so and others.
* The Aurora multiport programming info was obtained mainly from the
* Cirrus Logic CD180 documentation (available on the web), and by
* doing heavy tests on the board. Many thanks to Eddie C. Dost for the
* help on the sbus interface.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Revision 1.0
*
* This is the first public release.
*
* This version needs a lot of feedback. This is the version that works
* with _my_ board. My board is model 1600se, revision '@(#)1600se.fth
* 1.2 3/28/95 1'. The driver might work with your board, but I do not
* guarantee it. If you have _any_ type of board, I need to know if the
* driver works or not, I need to know exactly your board parameters
* (get them with 'cd /proc/openprom/iommu/sbus/sio16/; ls *; cat *')
* Also, I need your board revision code, which is written on the board.
* Send me the output of my driver too (it outputs through klogd).
*
* If the driver does not work, you can try enabling the debug options
* to see what's wrong or what should be done.
*
* I'm sorry about the alignment of the code. It was written in a
* 128x48 environment.
*
* I must say that I do not like Aurora Technologies' policy. I asked
* them to help me do this driver faster, but they ended by something
* like "don't call us, we'll call you", and I never heard anything
* from them. They told me "knowing the way the board works, I don't
* doubt you and others on the net will make the driver."
* The truth about this board is that it has nothing intelligent on it.
* If you want to say to somebody what kind of board you have, say that
* it uses Cirrus Logic processors (CD180). The power of the board is
* in those two chips. The rest of the board is the interface to the
* sbus and to the peripherals. Still, they did something smart: they
* reversed DTR and RTS to make on-board automatic hardware flow
* control usable.
* Thanks to Aurora Technologies for wasting my time, nerves and money.
*/
#ifndef __LINUX_AURORA_H
#define __LINUX_AURORA_H
#include <linux/serial.h>
#include <linux/serialP.h>
#ifdef __KERNEL__
/* This is the number of boards to support. I've only tested this driver with
* one board, so it might not work.
*/
#define AURORA_NBOARD 1
/* Useful ? Yes. But you can safely comment the warnings if they annoy you
* (let me say that again: the warnings in the code, not this define).
*/
#define AURORA_PARANOIA_CHECK
/* Well, after many lost nights, I found that the IRQ for this board is
* selected from four built-in values by writing some bits in the
* configuration register. This causes a little problem to occur: which
* IRQ to select ? Which one is the best for the user ? Well, I finally
* decided for the following algorithm: if the "bintr" value is not acceptable
* (not within type_1_irq[], then test the "intr" value, if that fails too,
* try each value from type_1_irq until succeded. Hope it's ok.
* You can safely reorder the irq's.
*/
#define TYPE_1_IRQS 4
unsigned char type_1_irq[TYPE_1_IRQS] = {
3, 5, 9, 13
};
/* I know something about another method of interrupt setting, but not enough.
* Also, this is for another type of board, so I first have to learn how to
* detect it.
#define TYPE_2_IRQS 3
unsigned char type_2_irq[TYPE_2_IRQS] = {
0, 0, 0 ** could anyone find these for me ? (see AURORA_ALLIRQ below) **
};
unsigned char type_2_mask[TYPE_2_IRQS] = {
32, 64, 128
};
*/
/* The following section should only be modified by those who know what
* they're doing (or don't, but want to help with some feedback). Modifying
* anything raises a _big_ probability for your system to hang, but the
* sacrifice worths. (I sacrificed my ext2fs many, many times...)
*/
/* This one tries to dump to console the name of almost every function called,
* and many other debugging info.
*/
#undef AURORA_DEBUG
/* These are the most dangerous and useful defines. They do printk() during
* the interrupt processing routine(s), so if you manage to get "flooded" by
* irq's, start thinking about the "Power off/on" button...
*/
#undef AURORA_INTNORM /* This one enables the "normal" messages, but some
* of them cause flood, so I preffered putting
* them under a define */
#undef AURORA_INT_DEBUG /* This one is really bad. */
/* Here's something helpful: after n irq's, the board will be disabled. This
* prevents irq flooding during debug (no need to think about power
* off/on anymore...)
*/
#define AURORA_FLOODPRO 10
/* This one helps finding which irq the board calls, in case of a strange/
* unsupported board. AURORA_INT_DEBUG should be enabled, because I don't
* think /proc/interrupts or any command will be available in case of an irq
* flood... "allirq" is the list of all free irq's.
*/
/*
#define AURORA_ALLIRQ 6
int allirq[AURORA_ALLIRQ]={
2,3,5,7,9,13
};
*/
/* These must not be modified. These values are assumed during the code for
* performance optimisations.
*/
#define AURORA_NCD180 2 /* two chips per board */
#define AURORA_NPORT 8 /* 8 ports per chip */
/* several utilities */
#define AURORA_BOARD(line) (((line) >> 4) & 0x01)
#define AURORA_CD180(line) (((line) >> 3) & 0x01)
#define AURORA_PORT(line) ((line) & 15)
#define AURORA_TNPORTS (AURORA_NBOARD*AURORA_NCD180*AURORA_NPORT)
/* Ticks per sec. Used for setting receiver timeout and break length */
#define AURORA_TPS 4000
#define AURORA_MAGIC 0x0A18
/* Yeah, after heavy testing I decided it must be 6.
* Sure, You can change it if needed.
*/
#define AURORA_RXFIFO 6 /* Max. receiver FIFO size (1-8) */
#define AURORA_RXTH 7
struct aurora_reg1 {
__volatile__ unsigned char r;
};
struct aurora_reg128 {
__volatile__ unsigned char r[128];
};
struct aurora_reg4 {
__volatile__ unsigned char r[4];
};
struct Aurora_board {
unsigned long flags;
struct aurora_reg1 * r0; /* This is the board configuration
* register (write-only). */
struct aurora_reg128 * r[2]; /* These are the registers for the
* two chips. */
struct aurora_reg4 * r3; /* These are used for hardware-based
* acknowledge. Software-based ack is
* not supported by CD180. */
unsigned int oscfreq; /* The on-board oscillator
* frequency, in Hz. */
unsigned char irq;
#ifdef MODULE
signed char count; /* counts the use of the board */
#endif
/* Values for the dtr_rts swapped mode. */
unsigned char DTR;
unsigned char RTS;
unsigned char MSVDTR;
unsigned char MSVRTS;
/* Values for hardware acknowledge. */
unsigned char ACK_MINT, ACK_TINT, ACK_RINT;
};
/* Board configuration register */
#define AURORA_CFG_ENABLE_IO 8
#define AURORA_CFG_ENABLE_IRQ 4
/* Board flags */
#define AURORA_BOARD_PRESENT 0x00000001
#define AURORA_BOARD_ACTIVE 0x00000002
#define AURORA_BOARD_TYPE_2 0x00000004 /* don't know how to
* detect this yet */
#define AURORA_BOARD_DTR_FLOW_OK 0x00000008
/* The story goes like this: Cirrus programmed the CD-180 chip to do automatic
* hardware flow control, and do it using CTS and DTR. CTS is ok, but, if you
* have a modem and the chip drops DTR, then the modem will drop the carrier
* (ain't that cute...). Luckily, the guys at Aurora decided to swap DTR and
* RTS, which makes the flow control usable. I hope that all the boards made
* by Aurora have these two signals swapped. If your's doesn't but you have a
* breakout box, you can try to reverse them yourself, then set the following
* flag.
*/
#undef AURORA_FORCE_DTR_FLOW
/* In fact, a few more words have to be said about hardware flow control.
* This driver handles "output" flow control through the on-board facility
* CTS Auto Enable. For the "input" flow control there are two cases when
* the flow should be controlled. The first case is when the kernel is so
* busy that it cannot process IRQ's in time; this flow control can only be
* activated by the on-board chip, and if the board has RTS and DTR swapped,
* this facility is usable. The second case is when the application is so
* busy that it cannot receive bytes from the kernel, and this flow must be
* activated by software. This second case is not yet implemented in this
* driver. Unfortunately, I estimate that the second case is the one that
* occurs the most.
*/
struct Aurora_port {
int magic;
int baud_base;
int flags;
struct tty_struct * tty;
int count;
int blocked_open;
long event;
int timeout;
int close_delay;
unsigned char * xmit_buf;
int custom_divisor;
int xmit_head;
int xmit_tail;
int xmit_cnt;
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
struct tq_struct tqueue;
struct tq_struct tqueue_hangup;
short wakeup_chars;
short break_length;
unsigned short closing_wait;
unsigned char mark_mask;
unsigned char SRER;
unsigned char MSVR;
unsigned char COR2;
#ifdef AURORA_REPORT_OVERRUN
unsigned long overrun;
#endif
#ifdef AURORA_REPORT_FIFO
unsigned long hits[10];
#endif
};
#endif
#endif /*__LINUX_AURORA_H*/