WSL2-Linux-Kernel/arch/arm64/kernel/head.S

624 строки
16 KiB
ArmAsm

/*
* Low-level CPU initialisation
* Based on arch/arm/kernel/head.S
*
* Copyright (C) 1994-2002 Russell King
* Copyright (C) 2003-2012 ARM Ltd.
* Authors: Catalin Marinas <catalin.marinas@arm.com>
* Will Deacon <will.deacon@arm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/irqchip/arm-gic-v3.h>
#include <asm/assembler.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
#include <asm/cputype.h>
#include <asm/memory.h>
#include <asm/thread_info.h>
#include <asm/pgtable-hwdef.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/virt.h>
#define __PHYS_OFFSET (KERNEL_START - TEXT_OFFSET)
#if (TEXT_OFFSET & 0xfff) != 0
#error TEXT_OFFSET must be at least 4KB aligned
#elif (PAGE_OFFSET & 0x1fffff) != 0
#error PAGE_OFFSET must be at least 2MB aligned
#elif TEXT_OFFSET > 0x1fffff
#error TEXT_OFFSET must be less than 2MB
#endif
#ifdef CONFIG_ARM64_64K_PAGES
#define BLOCK_SHIFT PAGE_SHIFT
#define BLOCK_SIZE PAGE_SIZE
#define TABLE_SHIFT PMD_SHIFT
#else
#define BLOCK_SHIFT SECTION_SHIFT
#define BLOCK_SIZE SECTION_SIZE
#define TABLE_SHIFT PUD_SHIFT
#endif
#define KERNEL_START _text
#define KERNEL_END _end
/*
* Initial memory map attributes.
*/
#ifndef CONFIG_SMP
#define PTE_FLAGS PTE_TYPE_PAGE | PTE_AF
#define PMD_FLAGS PMD_TYPE_SECT | PMD_SECT_AF
#else
#define PTE_FLAGS PTE_TYPE_PAGE | PTE_AF | PTE_SHARED
#define PMD_FLAGS PMD_TYPE_SECT | PMD_SECT_AF | PMD_SECT_S
#endif
#ifdef CONFIG_ARM64_64K_PAGES
#define MM_MMUFLAGS PTE_ATTRINDX(MT_NORMAL) | PTE_FLAGS
#else
#define MM_MMUFLAGS PMD_ATTRINDX(MT_NORMAL) | PMD_FLAGS
#endif
/*
* Kernel startup entry point.
* ---------------------------
*
* The requirements are:
* MMU = off, D-cache = off, I-cache = on or off,
* x0 = physical address to the FDT blob.
*
* This code is mostly position independent so you call this at
* __pa(PAGE_OFFSET + TEXT_OFFSET).
*
* Note that the callee-saved registers are used for storing variables
* that are useful before the MMU is enabled. The allocations are described
* in the entry routines.
*/
__HEAD
/*
* DO NOT MODIFY. Image header expected by Linux boot-loaders.
*/
#ifdef CONFIG_EFI
efi_head:
/*
* This add instruction has no meaningful effect except that
* its opcode forms the magic "MZ" signature required by UEFI.
*/
add x13, x18, #0x16
b stext
#else
b stext // branch to kernel start, magic
.long 0 // reserved
#endif
.quad _kernel_offset_le // Image load offset from start of RAM, little-endian
.quad _kernel_size_le // Effective size of kernel image, little-endian
.quad _kernel_flags_le // Informative flags, little-endian
.quad 0 // reserved
.quad 0 // reserved
.quad 0 // reserved
.byte 0x41 // Magic number, "ARM\x64"
.byte 0x52
.byte 0x4d
.byte 0x64
#ifdef CONFIG_EFI
.long pe_header - efi_head // Offset to the PE header.
#else
.word 0 // reserved
#endif
#ifdef CONFIG_EFI
.globl stext_offset
.set stext_offset, stext - efi_head
.align 3
pe_header:
.ascii "PE"
.short 0
coff_header:
.short 0xaa64 // AArch64
.short 2 // nr_sections
.long 0 // TimeDateStamp
.long 0 // PointerToSymbolTable
.long 1 // NumberOfSymbols
.short section_table - optional_header // SizeOfOptionalHeader
.short 0x206 // Characteristics.
// IMAGE_FILE_DEBUG_STRIPPED |
// IMAGE_FILE_EXECUTABLE_IMAGE |
// IMAGE_FILE_LINE_NUMS_STRIPPED
optional_header:
.short 0x20b // PE32+ format
.byte 0x02 // MajorLinkerVersion
.byte 0x14 // MinorLinkerVersion
.long _end - stext // SizeOfCode
.long 0 // SizeOfInitializedData
.long 0 // SizeOfUninitializedData
.long efi_stub_entry - efi_head // AddressOfEntryPoint
.long stext_offset // BaseOfCode
extra_header_fields:
.quad 0 // ImageBase
.long 0x1000 // SectionAlignment
.long PECOFF_FILE_ALIGNMENT // FileAlignment
.short 0 // MajorOperatingSystemVersion
.short 0 // MinorOperatingSystemVersion
.short 0 // MajorImageVersion
.short 0 // MinorImageVersion
.short 0 // MajorSubsystemVersion
.short 0 // MinorSubsystemVersion
.long 0 // Win32VersionValue
.long _end - efi_head // SizeOfImage
// Everything before the kernel image is considered part of the header
.long stext_offset // SizeOfHeaders
.long 0 // CheckSum
.short 0xa // Subsystem (EFI application)
.short 0 // DllCharacteristics
.quad 0 // SizeOfStackReserve
.quad 0 // SizeOfStackCommit
.quad 0 // SizeOfHeapReserve
.quad 0 // SizeOfHeapCommit
.long 0 // LoaderFlags
.long 0x6 // NumberOfRvaAndSizes
.quad 0 // ExportTable
.quad 0 // ImportTable
.quad 0 // ResourceTable
.quad 0 // ExceptionTable
.quad 0 // CertificationTable
.quad 0 // BaseRelocationTable
// Section table
section_table:
/*
* The EFI application loader requires a relocation section
* because EFI applications must be relocatable. This is a
* dummy section as far as we are concerned.
*/
.ascii ".reloc"
.byte 0
.byte 0 // end of 0 padding of section name
.long 0
.long 0
.long 0 // SizeOfRawData
.long 0 // PointerToRawData
.long 0 // PointerToRelocations
.long 0 // PointerToLineNumbers
.short 0 // NumberOfRelocations
.short 0 // NumberOfLineNumbers
.long 0x42100040 // Characteristics (section flags)
.ascii ".text"
.byte 0
.byte 0
.byte 0 // end of 0 padding of section name
.long _end - stext // VirtualSize
.long stext_offset // VirtualAddress
.long _edata - stext // SizeOfRawData
.long stext_offset // PointerToRawData
.long 0 // PointerToRelocations (0 for executables)
.long 0 // PointerToLineNumbers (0 for executables)
.short 0 // NumberOfRelocations (0 for executables)
.short 0 // NumberOfLineNumbers (0 for executables)
.long 0xe0500020 // Characteristics (section flags)
/*
* EFI will load stext onwards at the 4k section alignment
* described in the PE/COFF header. To ensure that instruction
* sequences using an adrp and a :lo12: immediate will function
* correctly at this alignment, we must ensure that stext is
* placed at a 4k boundary in the Image to begin with.
*/
.align 12
#endif
ENTRY(stext)
mov x21, x0 // x21=FDT
bl el2_setup // Drop to EL1, w20=cpu_boot_mode
adrp x24, __PHYS_OFFSET
bl set_cpu_boot_mode_flag
bl __vet_fdt
bl __create_page_tables // x25=TTBR0, x26=TTBR1
/*
* The following calls CPU setup code, see arch/arm64/mm/proc.S for
* details.
* On return, the CPU will be ready for the MMU to be turned on and
* the TCR will have been set.
*/
ldr x27, =__mmap_switched // address to jump to after
// MMU has been enabled
adr_l lr, __enable_mmu // return (PIC) address
b __cpu_setup // initialise processor
ENDPROC(stext)
/*
* Determine validity of the x21 FDT pointer.
* The dtb must be 8-byte aligned and live in the first 512M of memory.
*/
__vet_fdt:
tst x21, #0x7
b.ne 1f
cmp x21, x24
b.lt 1f
mov x0, #(1 << 29)
add x0, x0, x24
cmp x21, x0
b.ge 1f
ret
1:
mov x21, #0
ret
ENDPROC(__vet_fdt)
/*
* Macro to create a table entry to the next page.
*
* tbl: page table address
* virt: virtual address
* shift: #imm page table shift
* ptrs: #imm pointers per table page
*
* Preserves: virt
* Corrupts: tmp1, tmp2
* Returns: tbl -> next level table page address
*/
.macro create_table_entry, tbl, virt, shift, ptrs, tmp1, tmp2
lsr \tmp1, \virt, #\shift
and \tmp1, \tmp1, #\ptrs - 1 // table index
add \tmp2, \tbl, #PAGE_SIZE
orr \tmp2, \tmp2, #PMD_TYPE_TABLE // address of next table and entry type
str \tmp2, [\tbl, \tmp1, lsl #3]
add \tbl, \tbl, #PAGE_SIZE // next level table page
.endm
/*
* Macro to populate the PGD (and possibily PUD) for the corresponding
* block entry in the next level (tbl) for the given virtual address.
*
* Preserves: tbl, next, virt
* Corrupts: tmp1, tmp2
*/
.macro create_pgd_entry, tbl, virt, tmp1, tmp2
create_table_entry \tbl, \virt, PGDIR_SHIFT, PTRS_PER_PGD, \tmp1, \tmp2
#if SWAPPER_PGTABLE_LEVELS == 3
create_table_entry \tbl, \virt, TABLE_SHIFT, PTRS_PER_PTE, \tmp1, \tmp2
#endif
.endm
/*
* Macro to populate block entries in the page table for the start..end
* virtual range (inclusive).
*
* Preserves: tbl, flags
* Corrupts: phys, start, end, pstate
*/
.macro create_block_map, tbl, flags, phys, start, end
lsr \phys, \phys, #BLOCK_SHIFT
lsr \start, \start, #BLOCK_SHIFT
and \start, \start, #PTRS_PER_PTE - 1 // table index
orr \phys, \flags, \phys, lsl #BLOCK_SHIFT // table entry
lsr \end, \end, #BLOCK_SHIFT
and \end, \end, #PTRS_PER_PTE - 1 // table end index
9999: str \phys, [\tbl, \start, lsl #3] // store the entry
add \start, \start, #1 // next entry
add \phys, \phys, #BLOCK_SIZE // next block
cmp \start, \end
b.ls 9999b
.endm
/*
* Setup the initial page tables. We only setup the barest amount which is
* required to get the kernel running. The following sections are required:
* - identity mapping to enable the MMU (low address, TTBR0)
* - first few MB of the kernel linear mapping to jump to once the MMU has
* been enabled, including the FDT blob (TTBR1)
* - pgd entry for fixed mappings (TTBR1)
*/
__create_page_tables:
adrp x25, idmap_pg_dir
adrp x26, swapper_pg_dir
mov x27, lr
/*
* Invalidate the idmap and swapper page tables to avoid potential
* dirty cache lines being evicted.
*/
mov x0, x25
add x1, x26, #SWAPPER_DIR_SIZE
bl __inval_cache_range
/*
* Clear the idmap and swapper page tables.
*/
mov x0, x25
add x6, x26, #SWAPPER_DIR_SIZE
1: stp xzr, xzr, [x0], #16
stp xzr, xzr, [x0], #16
stp xzr, xzr, [x0], #16
stp xzr, xzr, [x0], #16
cmp x0, x6
b.lo 1b
ldr x7, =MM_MMUFLAGS
/*
* Create the identity mapping.
*/
mov x0, x25 // idmap_pg_dir
adrp x3, KERNEL_START // __pa(KERNEL_START)
create_pgd_entry x0, x3, x5, x6
mov x5, x3 // __pa(KERNEL_START)
adr_l x6, KERNEL_END // __pa(KERNEL_END)
create_block_map x0, x7, x3, x5, x6
/*
* Map the kernel image (starting with PHYS_OFFSET).
*/
mov x0, x26 // swapper_pg_dir
mov x5, #PAGE_OFFSET
create_pgd_entry x0, x5, x3, x6
ldr x6, =KERNEL_END // __va(KERNEL_END)
mov x3, x24 // phys offset
create_block_map x0, x7, x3, x5, x6
/*
* Map the FDT blob (maximum 2MB; must be within 512MB of
* PHYS_OFFSET).
*/
mov x3, x21 // FDT phys address
and x3, x3, #~((1 << 21) - 1) // 2MB aligned
mov x6, #PAGE_OFFSET
sub x5, x3, x24 // subtract PHYS_OFFSET
tst x5, #~((1 << 29) - 1) // within 512MB?
csel x21, xzr, x21, ne // zero the FDT pointer
b.ne 1f
add x5, x5, x6 // __va(FDT blob)
add x6, x5, #1 << 21 // 2MB for the FDT blob
sub x6, x6, #1 // inclusive range
create_block_map x0, x7, x3, x5, x6
1:
/*
* Since the page tables have been populated with non-cacheable
* accesses (MMU disabled), invalidate the idmap and swapper page
* tables again to remove any speculatively loaded cache lines.
*/
mov x0, x25
add x1, x26, #SWAPPER_DIR_SIZE
bl __inval_cache_range
mov lr, x27
ret
ENDPROC(__create_page_tables)
.ltorg
/*
* The following fragment of code is executed with the MMU enabled.
*/
.set initial_sp, init_thread_union + THREAD_START_SP
__mmap_switched:
adr_l x6, __bss_start
adr_l x7, __bss_stop
1: cmp x6, x7
b.hs 2f
str xzr, [x6], #8 // Clear BSS
b 1b
2:
adr_l sp, initial_sp, x4
str_l x21, __fdt_pointer, x5 // Save FDT pointer
str_l x24, memstart_addr, x6 // Save PHYS_OFFSET
mov x29, #0
b start_kernel
ENDPROC(__mmap_switched)
/*
* end early head section, begin head code that is also used for
* hotplug and needs to have the same protections as the text region
*/
.section ".text","ax"
/*
* If we're fortunate enough to boot at EL2, ensure that the world is
* sane before dropping to EL1.
*
* Returns either BOOT_CPU_MODE_EL1 or BOOT_CPU_MODE_EL2 in x20 if
* booted in EL1 or EL2 respectively.
*/
ENTRY(el2_setup)
mrs x0, CurrentEL
cmp x0, #CurrentEL_EL2
b.ne 1f
mrs x0, sctlr_el2
CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2
CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2
msr sctlr_el2, x0
b 2f
1: mrs x0, sctlr_el1
CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1
CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1
msr sctlr_el1, x0
mov w20, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1
isb
ret
/* Hyp configuration. */
2: mov x0, #(1 << 31) // 64-bit EL1
msr hcr_el2, x0
/* Generic timers. */
mrs x0, cnthctl_el2
orr x0, x0, #3 // Enable EL1 physical timers
msr cnthctl_el2, x0
msr cntvoff_el2, xzr // Clear virtual offset
#ifdef CONFIG_ARM_GIC_V3
/* GICv3 system register access */
mrs x0, id_aa64pfr0_el1
ubfx x0, x0, #24, #4
cmp x0, #1
b.ne 3f
mrs_s x0, ICC_SRE_EL2
orr x0, x0, #ICC_SRE_EL2_SRE // Set ICC_SRE_EL2.SRE==1
orr x0, x0, #ICC_SRE_EL2_ENABLE // Set ICC_SRE_EL2.Enable==1
msr_s ICC_SRE_EL2, x0
isb // Make sure SRE is now set
msr_s ICH_HCR_EL2, xzr // Reset ICC_HCR_EL2 to defaults
3:
#endif
/* Populate ID registers. */
mrs x0, midr_el1
mrs x1, mpidr_el1
msr vpidr_el2, x0
msr vmpidr_el2, x1
/* sctlr_el1 */
mov x0, #0x0800 // Set/clear RES{1,0} bits
CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems
CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems
msr sctlr_el1, x0
/* Coprocessor traps. */
mov x0, #0x33ff
msr cptr_el2, x0 // Disable copro. traps to EL2
#ifdef CONFIG_COMPAT
msr hstr_el2, xzr // Disable CP15 traps to EL2
#endif
/* Stage-2 translation */
msr vttbr_el2, xzr
/* Hypervisor stub */
adrp x0, __hyp_stub_vectors
add x0, x0, #:lo12:__hyp_stub_vectors
msr vbar_el2, x0
/* spsr */
mov x0, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\
PSR_MODE_EL1h)
msr spsr_el2, x0
msr elr_el2, lr
mov w20, #BOOT_CPU_MODE_EL2 // This CPU booted in EL2
eret
ENDPROC(el2_setup)
/*
* Sets the __boot_cpu_mode flag depending on the CPU boot mode passed
* in x20. See arch/arm64/include/asm/virt.h for more info.
*/
ENTRY(set_cpu_boot_mode_flag)
adr_l x1, __boot_cpu_mode
cmp w20, #BOOT_CPU_MODE_EL2
b.ne 1f
add x1, x1, #4
1: str w20, [x1] // This CPU has booted in EL1
dmb sy
dc ivac, x1 // Invalidate potentially stale cache line
ret
ENDPROC(set_cpu_boot_mode_flag)
/*
* We need to find out the CPU boot mode long after boot, so we need to
* store it in a writable variable.
*
* This is not in .bss, because we set it sufficiently early that the boot-time
* zeroing of .bss would clobber it.
*/
.pushsection .data..cacheline_aligned
.align L1_CACHE_SHIFT
ENTRY(__boot_cpu_mode)
.long BOOT_CPU_MODE_EL2
.long BOOT_CPU_MODE_EL1
.popsection
#ifdef CONFIG_SMP
/*
* This provides a "holding pen" for platforms to hold all secondary
* cores are held until we're ready for them to initialise.
*/
ENTRY(secondary_holding_pen)
bl el2_setup // Drop to EL1, w20=cpu_boot_mode
bl set_cpu_boot_mode_flag
mrs x0, mpidr_el1
ldr x1, =MPIDR_HWID_BITMASK
and x0, x0, x1
adr_l x3, secondary_holding_pen_release
pen: ldr x4, [x3]
cmp x4, x0
b.eq secondary_startup
wfe
b pen
ENDPROC(secondary_holding_pen)
/*
* Secondary entry point that jumps straight into the kernel. Only to
* be used where CPUs are brought online dynamically by the kernel.
*/
ENTRY(secondary_entry)
bl el2_setup // Drop to EL1
bl set_cpu_boot_mode_flag
b secondary_startup
ENDPROC(secondary_entry)
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
*/
adrp x25, idmap_pg_dir
adrp x26, swapper_pg_dir
bl __cpu_setup // initialise processor
ldr x21, =secondary_data
ldr x27, =__secondary_switched // address to jump to after enabling the MMU
b __enable_mmu
ENDPROC(secondary_startup)
ENTRY(__secondary_switched)
ldr x0, [x21] // get secondary_data.stack
mov sp, x0
mov x29, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
#endif /* CONFIG_SMP */
/*
* Enable the MMU.
*
* x0 = SCTLR_EL1 value for turning on the MMU.
* x27 = *virtual* address to jump to upon completion
*
* other registers depend on the function called upon completion
*/
__enable_mmu:
ldr x5, =vectors
msr vbar_el1, x5
msr ttbr0_el1, x25 // load TTBR0
msr ttbr1_el1, x26 // load TTBR1
isb
msr sctlr_el1, x0
isb
br x27
ENDPROC(__enable_mmu)