WSL2-Linux-Kernel

История

Anton Vorontsov e85477f516 powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards TSEC0 is connected to Vitesse 7385 5-port switch. The switch isn't connected to any mdio bus, the link to the switch is fixed to Full-duplex 1000 Mb/s (no pause). This patch fixes following failure during bootup: mdio@24520:01 not found eth0: Could not attach to PHY IP-Config: Failed to open eth0 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>		2009-02-06 10:38:57 -06:00
..
dtc-src	…
dts	powerpc/83xx: Fix TSEC0 workability on MPC8313E-RDB boards	2009-02-06 10:38:57 -06:00
libfdt	powerpc: Fix bug in kernel copy of libfdt's fdt_subnode_offset_namelen()	2008-10-31 20:14:19 +11:00
.gitignore	…
4xx.c	…
4xx.h	…
44x.h	…
Makefile	powerpc: Copy bootable images in the default install script	2009-01-08 16:25:09 +11:00
README	…
addRamDisk.c	…
addnote.c	Revert "powerpc: Sync RPA note in zImage with kernel's RPA note"	2008-10-31 22:36:21 +11:00
bamboo.c	…
cpm-serial.c	…
crt0.S	…
crtsavres.S	…
cuboot-8xx.c	…
cuboot-52xx.c	…
cuboot-83xx.c	…
cuboot-85xx-cpm2.c	…
cuboot-85xx.c	…
cuboot-824x.c	…
cuboot-acadia.c	powerpc/40x: Add cuboot wrapper for Acadia board	2008-10-17 10:31:19 -04:00
cuboot-bamboo.c	…
cuboot-c2k.c	…
cuboot-ebony.c	…
cuboot-katmai.c	…
cuboot-mpc7448hpc2.c	…
cuboot-pq2.c	…
cuboot-rainier.c	…
cuboot-sam440ep.c	…
cuboot-sequoia.c	…
cuboot-taishan.c	…
cuboot-warp.c	powerpc/44x: Warp patches for the new NDFC driver	2009-01-20 08:17:21 -05:00
cuboot-yosemite.c	…
cuboot.c	…
cuboot.h	…
dcr.h	…
devtree.c	powerpc/bootwrapper: Use the child-bus #address-cells to decide which range entry to use	2008-12-21 14:21:17 +11:00
div64.S	…
dummy.c	…
ebony.c	…
elf.h	…
elf_util.c	…
ep88xc.c	…
ep405.c	…
ep8248e.c	…
fixed-head.S	…
flatdevtree_env.h	…
fsl-soc.c	…
fsl-soc.h	…
gunzip_util.c	…
gunzip_util.h	…
hack-coff.c	…
holly.c	…
install.sh	powerpc: Copy bootable images in the default install script	2009-01-08 16:25:09 +11:00
io.h	…
libfdt-wrapper.c	powerpc/boot: Allocate more memory for dtb	2008-11-06 09:49:43 +11:00
libfdt_env.h	…
main.c	powerpc: Fix format string warning in arch/powerpc/boot/main.c	2008-10-31 20:14:19 +11:00
mktree.c	…
mpc8xx.c	…
mpc8xx.h	…
mpc52xx-psc.c	…
mpsc.c	…
mv64x60.c	…
mv64x60.h	…
mv64x60_i2c.c	…
ns16550.c	…
of.c	…
of.h	…
ofconsole.c	…
oflib.c	…
ops.h	powerpc: Add del_node() for early boot code to prune inapplicable devices.	2008-10-22 15:01:21 +11:00
page.h	…
planetcore.c	…
planetcore.h	…
ppc_asm.h	…
ppcboot.h	…
pq2.c	…
pq2.h	…
prpmc2800.c	…
ps3-head.S	…
ps3-hvcall.S	…
ps3.c	…
redboot-8xx.c	…
redboot-83xx.c	…
redboot.h	…
reg.h	…
rs6000.h	…
serial.c	…
simple_alloc.c	…
simpleboot.c	…
stdio.c	…
stdio.h	…
stdlib.c	…
stdlib.h	…
string.S	powerpc: Fix boot wrapper memcmp() called with zero length argument	2008-10-21 15:17:48 +11:00
string.h	…
treeboot-bamboo.c	…
treeboot-ebony.c	…
treeboot-walnut.c	…
types.h	…
uartlite.c	…
util.S	…
virtex.c	…
virtex405-head.S	…
wrapper	Revert "powerpc: Sync RPA note in zImage with kernel's RPA note"	2008-10-31 22:36:21 +11:00
zImage.coff.lds.S	…
zImage.lds.S	…
zImage.ps3.lds.S	…

README

To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary:

objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz
objcopy -j .kernel:System.map -O binary zImage System.map.gz
objcopy -j .kernel:.config -O binary zImage config.gz
objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz


	Peter