485 строки
13 KiB
C
485 строки
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* A driver for the Integrated Circuits ICS932S401
|
|
* Copyright (C) 2008 IBM
|
|
*
|
|
* Author: Darrick J. Wong <darrick.wong@oracle.com>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Addresses to scan */
|
|
static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END };
|
|
|
|
/* ICS932S401 registers */
|
|
#define ICS932S401_REG_CFG2 0x01
|
|
#define ICS932S401_CFG1_SPREAD 0x01
|
|
#define ICS932S401_REG_CFG7 0x06
|
|
#define ICS932S401_FS_MASK 0x07
|
|
#define ICS932S401_REG_VENDOR_REV 0x07
|
|
#define ICS932S401_VENDOR 1
|
|
#define ICS932S401_VENDOR_MASK 0x0F
|
|
#define ICS932S401_REV 4
|
|
#define ICS932S401_REV_SHIFT 4
|
|
#define ICS932S401_REG_DEVICE 0x09
|
|
#define ICS932S401_DEVICE 11
|
|
#define ICS932S401_REG_CTRL 0x0A
|
|
#define ICS932S401_MN_ENABLED 0x80
|
|
#define ICS932S401_CPU_ALT 0x04
|
|
#define ICS932S401_SRC_ALT 0x08
|
|
#define ICS932S401_REG_CPU_M_CTRL 0x0B
|
|
#define ICS932S401_M_MASK 0x3F
|
|
#define ICS932S401_REG_CPU_N_CTRL 0x0C
|
|
#define ICS932S401_REG_CPU_SPREAD1 0x0D
|
|
#define ICS932S401_REG_CPU_SPREAD2 0x0E
|
|
#define ICS932S401_SPREAD_MASK 0x7FFF
|
|
#define ICS932S401_REG_SRC_M_CTRL 0x0F
|
|
#define ICS932S401_REG_SRC_N_CTRL 0x10
|
|
#define ICS932S401_REG_SRC_SPREAD1 0x11
|
|
#define ICS932S401_REG_SRC_SPREAD2 0x12
|
|
#define ICS932S401_REG_CPU_DIVISOR 0x13
|
|
#define ICS932S401_CPU_DIVISOR_SHIFT 4
|
|
#define ICS932S401_REG_PCISRC_DIVISOR 0x14
|
|
#define ICS932S401_SRC_DIVISOR_MASK 0x0F
|
|
#define ICS932S401_PCI_DIVISOR_SHIFT 4
|
|
|
|
/* Base clock is 14.318MHz */
|
|
#define BASE_CLOCK 14318
|
|
|
|
#define NUM_REGS 21
|
|
#define NUM_MIRRORED_REGS 15
|
|
|
|
static int regs_to_copy[NUM_MIRRORED_REGS] = {
|
|
ICS932S401_REG_CFG2,
|
|
ICS932S401_REG_CFG7,
|
|
ICS932S401_REG_VENDOR_REV,
|
|
ICS932S401_REG_DEVICE,
|
|
ICS932S401_REG_CTRL,
|
|
ICS932S401_REG_CPU_M_CTRL,
|
|
ICS932S401_REG_CPU_N_CTRL,
|
|
ICS932S401_REG_CPU_SPREAD1,
|
|
ICS932S401_REG_CPU_SPREAD2,
|
|
ICS932S401_REG_SRC_M_CTRL,
|
|
ICS932S401_REG_SRC_N_CTRL,
|
|
ICS932S401_REG_SRC_SPREAD1,
|
|
ICS932S401_REG_SRC_SPREAD2,
|
|
ICS932S401_REG_CPU_DIVISOR,
|
|
ICS932S401_REG_PCISRC_DIVISOR,
|
|
};
|
|
|
|
/* How often do we reread sensors values? (In jiffies) */
|
|
#define SENSOR_REFRESH_INTERVAL (2 * HZ)
|
|
|
|
/* How often do we reread sensor limit values? (In jiffies) */
|
|
#define LIMIT_REFRESH_INTERVAL (60 * HZ)
|
|
|
|
struct ics932s401_data {
|
|
struct attribute_group attrs;
|
|
struct mutex lock;
|
|
char sensors_valid;
|
|
unsigned long sensors_last_updated; /* In jiffies */
|
|
|
|
u8 regs[NUM_REGS];
|
|
};
|
|
|
|
static int ics932s401_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id);
|
|
static int ics932s401_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info);
|
|
static int ics932s401_remove(struct i2c_client *client);
|
|
|
|
static const struct i2c_device_id ics932s401_id[] = {
|
|
{ "ics932s401", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ics932s401_id);
|
|
|
|
static struct i2c_driver ics932s401_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "ics932s401",
|
|
},
|
|
.probe = ics932s401_probe,
|
|
.remove = ics932s401_remove,
|
|
.id_table = ics932s401_id,
|
|
.detect = ics932s401_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
static struct ics932s401_data *ics932s401_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ics932s401_data *data = i2c_get_clientdata(client);
|
|
unsigned long local_jiffies = jiffies;
|
|
int i, temp;
|
|
|
|
mutex_lock(&data->lock);
|
|
if (time_before(local_jiffies, data->sensors_last_updated +
|
|
SENSOR_REFRESH_INTERVAL)
|
|
&& data->sensors_valid)
|
|
goto out;
|
|
|
|
/*
|
|
* Each register must be read as a word and then right shifted 8 bits.
|
|
* Not really sure why this is; setting the "byte count programming"
|
|
* register to 1 does not fix this problem.
|
|
*/
|
|
for (i = 0; i < NUM_MIRRORED_REGS; i++) {
|
|
temp = i2c_smbus_read_word_data(client, regs_to_copy[i]);
|
|
if (temp < 0)
|
|
data->regs[regs_to_copy[i]] = 0;
|
|
data->regs[regs_to_copy[i]] = temp >> 8;
|
|
}
|
|
|
|
data->sensors_last_updated = local_jiffies;
|
|
data->sensors_valid = 1;
|
|
|
|
out:
|
|
mutex_unlock(&data->lock);
|
|
return data;
|
|
}
|
|
|
|
static ssize_t show_spread_enabled(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct ics932s401_data *data = ics932s401_update_device(dev);
|
|
|
|
if (data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD)
|
|
return sprintf(buf, "1\n");
|
|
|
|
return sprintf(buf, "0\n");
|
|
}
|
|
|
|
/* bit to cpu khz map */
|
|
static const int fs_speeds[] = {
|
|
266666,
|
|
133333,
|
|
200000,
|
|
166666,
|
|
333333,
|
|
100000,
|
|
400000,
|
|
0,
|
|
};
|
|
|
|
/* clock divisor map */
|
|
static const int divisors[] = {2, 3, 5, 15, 4, 6, 10, 30, 8, 12, 20, 60, 16,
|
|
24, 40, 120};
|
|
|
|
/* Calculate CPU frequency from the M/N registers. */
|
|
static int calculate_cpu_freq(struct ics932s401_data *data)
|
|
{
|
|
int m, n, freq;
|
|
|
|
m = data->regs[ICS932S401_REG_CPU_M_CTRL] & ICS932S401_M_MASK;
|
|
n = data->regs[ICS932S401_REG_CPU_N_CTRL];
|
|
|
|
/* Pull in bits 8 & 9 from the M register */
|
|
n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x80) << 1;
|
|
n |= ((int)data->regs[ICS932S401_REG_CPU_M_CTRL] & 0x40) << 3;
|
|
|
|
freq = BASE_CLOCK * (n + 8) / (m + 2);
|
|
freq /= divisors[data->regs[ICS932S401_REG_CPU_DIVISOR] >>
|
|
ICS932S401_CPU_DIVISOR_SHIFT];
|
|
|
|
return freq;
|
|
}
|
|
|
|
static ssize_t show_cpu_clock(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct ics932s401_data *data = ics932s401_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", calculate_cpu_freq(data));
|
|
}
|
|
|
|
static ssize_t show_cpu_clock_sel(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct ics932s401_data *data = ics932s401_update_device(dev);
|
|
int freq;
|
|
|
|
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
|
|
freq = calculate_cpu_freq(data);
|
|
else {
|
|
/* Freq is neatly wrapped up for us */
|
|
int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK;
|
|
|
|
freq = fs_speeds[fid];
|
|
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) {
|
|
switch (freq) {
|
|
case 166666:
|
|
freq = 160000;
|
|
break;
|
|
case 333333:
|
|
freq = 320000;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", freq);
|
|
}
|
|
|
|
/* Calculate SRC frequency from the M/N registers. */
|
|
static int calculate_src_freq(struct ics932s401_data *data)
|
|
{
|
|
int m, n, freq;
|
|
|
|
m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK;
|
|
n = data->regs[ICS932S401_REG_SRC_N_CTRL];
|
|
|
|
/* Pull in bits 8 & 9 from the M register */
|
|
n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1;
|
|
n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3;
|
|
|
|
freq = BASE_CLOCK * (n + 8) / (m + 2);
|
|
freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] &
|
|
ICS932S401_SRC_DIVISOR_MASK];
|
|
|
|
return freq;
|
|
}
|
|
|
|
static ssize_t show_src_clock(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct ics932s401_data *data = ics932s401_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", calculate_src_freq(data));
|
|
}
|
|
|
|
static ssize_t show_src_clock_sel(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct ics932s401_data *data = ics932s401_update_device(dev);
|
|
int freq;
|
|
|
|
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
|
|
freq = calculate_src_freq(data);
|
|
else
|
|
/* Freq is neatly wrapped up for us */
|
|
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT &&
|
|
data->regs[ICS932S401_REG_CTRL] & ICS932S401_SRC_ALT)
|
|
freq = 96000;
|
|
else
|
|
freq = 100000;
|
|
|
|
return sprintf(buf, "%d\n", freq);
|
|
}
|
|
|
|
/* Calculate PCI frequency from the SRC M/N registers. */
|
|
static int calculate_pci_freq(struct ics932s401_data *data)
|
|
{
|
|
int m, n, freq;
|
|
|
|
m = data->regs[ICS932S401_REG_SRC_M_CTRL] & ICS932S401_M_MASK;
|
|
n = data->regs[ICS932S401_REG_SRC_N_CTRL];
|
|
|
|
/* Pull in bits 8 & 9 from the M register */
|
|
n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x80) << 1;
|
|
n |= ((int)data->regs[ICS932S401_REG_SRC_M_CTRL] & 0x40) << 3;
|
|
|
|
freq = BASE_CLOCK * (n + 8) / (m + 2);
|
|
freq /= divisors[data->regs[ICS932S401_REG_PCISRC_DIVISOR] >>
|
|
ICS932S401_PCI_DIVISOR_SHIFT];
|
|
|
|
return freq;
|
|
}
|
|
|
|
static ssize_t show_pci_clock(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct ics932s401_data *data = ics932s401_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", calculate_pci_freq(data));
|
|
}
|
|
|
|
static ssize_t show_pci_clock_sel(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct ics932s401_data *data = ics932s401_update_device(dev);
|
|
int freq;
|
|
|
|
if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_MN_ENABLED)
|
|
freq = calculate_pci_freq(data);
|
|
else
|
|
freq = 33333;
|
|
|
|
return sprintf(buf, "%d\n", freq);
|
|
}
|
|
|
|
static ssize_t show_value(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf);
|
|
|
|
static ssize_t show_spread(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf);
|
|
|
|
static DEVICE_ATTR(spread_enabled, S_IRUGO, show_spread_enabled, NULL);
|
|
static DEVICE_ATTR(cpu_clock_selection, S_IRUGO, show_cpu_clock_sel, NULL);
|
|
static DEVICE_ATTR(cpu_clock, S_IRUGO, show_cpu_clock, NULL);
|
|
static DEVICE_ATTR(src_clock_selection, S_IRUGO, show_src_clock_sel, NULL);
|
|
static DEVICE_ATTR(src_clock, S_IRUGO, show_src_clock, NULL);
|
|
static DEVICE_ATTR(pci_clock_selection, S_IRUGO, show_pci_clock_sel, NULL);
|
|
static DEVICE_ATTR(pci_clock, S_IRUGO, show_pci_clock, NULL);
|
|
static DEVICE_ATTR(usb_clock, S_IRUGO, show_value, NULL);
|
|
static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL);
|
|
static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL);
|
|
static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL);
|
|
|
|
static struct attribute *ics932s401_attr[] = {
|
|
&dev_attr_spread_enabled.attr,
|
|
&dev_attr_cpu_clock_selection.attr,
|
|
&dev_attr_cpu_clock.attr,
|
|
&dev_attr_src_clock_selection.attr,
|
|
&dev_attr_src_clock.attr,
|
|
&dev_attr_pci_clock_selection.attr,
|
|
&dev_attr_pci_clock.attr,
|
|
&dev_attr_usb_clock.attr,
|
|
&dev_attr_ref_clock.attr,
|
|
&dev_attr_cpu_spread.attr,
|
|
&dev_attr_src_spread.attr,
|
|
NULL
|
|
};
|
|
|
|
static ssize_t show_value(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
int x;
|
|
|
|
if (devattr == &dev_attr_usb_clock)
|
|
x = 48000;
|
|
else if (devattr == &dev_attr_ref_clock)
|
|
x = BASE_CLOCK;
|
|
else
|
|
BUG();
|
|
|
|
return sprintf(buf, "%d\n", x);
|
|
}
|
|
|
|
static ssize_t show_spread(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct ics932s401_data *data = ics932s401_update_device(dev);
|
|
int reg;
|
|
unsigned long val;
|
|
|
|
if (!(data->regs[ICS932S401_REG_CFG2] & ICS932S401_CFG1_SPREAD))
|
|
return sprintf(buf, "0%%\n");
|
|
|
|
if (devattr == &dev_attr_src_spread)
|
|
reg = ICS932S401_REG_SRC_SPREAD1;
|
|
else if (devattr == &dev_attr_cpu_spread)
|
|
reg = ICS932S401_REG_CPU_SPREAD1;
|
|
else
|
|
BUG();
|
|
|
|
val = data->regs[reg] | (data->regs[reg + 1] << 8);
|
|
val &= ICS932S401_SPREAD_MASK;
|
|
|
|
/* Scale 0..2^14 to -0.5. */
|
|
val = 500000 * val / 16384;
|
|
return sprintf(buf, "-0.%lu%%\n", val);
|
|
}
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int ics932s401_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int vendor, device, revision;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
vendor = i2c_smbus_read_word_data(client, ICS932S401_REG_VENDOR_REV);
|
|
vendor >>= 8;
|
|
revision = vendor >> ICS932S401_REV_SHIFT;
|
|
vendor &= ICS932S401_VENDOR_MASK;
|
|
if (vendor != ICS932S401_VENDOR)
|
|
return -ENODEV;
|
|
|
|
device = i2c_smbus_read_word_data(client, ICS932S401_REG_DEVICE);
|
|
device >>= 8;
|
|
if (device != ICS932S401_DEVICE)
|
|
return -ENODEV;
|
|
|
|
if (revision != ICS932S401_REV)
|
|
dev_info(&adapter->dev, "Unknown revision %d\n", revision);
|
|
|
|
strlcpy(info->type, "ics932s401", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ics932s401_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct ics932s401_data *data;
|
|
int err;
|
|
|
|
data = kzalloc(sizeof(struct ics932s401_data), GFP_KERNEL);
|
|
if (!data) {
|
|
err = -ENOMEM;
|
|
goto exit;
|
|
}
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->lock);
|
|
|
|
dev_info(&client->dev, "%s chip found\n", client->name);
|
|
|
|
/* Register sysfs hooks */
|
|
data->attrs.attrs = ics932s401_attr;
|
|
err = sysfs_create_group(&client->dev.kobj, &data->attrs);
|
|
if (err)
|
|
goto exit_free;
|
|
|
|
return 0;
|
|
|
|
exit_free:
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int ics932s401_remove(struct i2c_client *client)
|
|
{
|
|
struct ics932s401_data *data = i2c_get_clientdata(client);
|
|
|
|
sysfs_remove_group(&client->dev.kobj, &data->attrs);
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
module_i2c_driver(ics932s401_driver);
|
|
|
|
MODULE_AUTHOR("Darrick J. Wong <darrick.wong@oracle.com>");
|
|
MODULE_DESCRIPTION("ICS932S401 driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* IBM IntelliStation Z30 */
|
|
MODULE_ALIAS("dmi:bvnIBM:*:rn9228:*");
|
|
MODULE_ALIAS("dmi:bvnIBM:*:rn9232:*");
|
|
|
|
/* IBM x3650/x3550 */
|
|
MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3650*");
|
|
MODULE_ALIAS("dmi:bvnIBM:*:pnIBMSystemx3550*");
|