3600 строки
109 KiB
C
3600 строки
109 KiB
C
/*
|
|
* Copyright (c) 2013 Intel Corporation. All rights reserved.
|
|
* Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
|
|
* All rights reserved.
|
|
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
|
|
*
|
|
* This software is available to you under a choice of one of two
|
|
* licenses. You may choose to be licensed under the terms of the GNU
|
|
* General Public License (GPL) Version 2, available from the file
|
|
* COPYING in the main directory of this source tree, or the
|
|
* OpenIB.org BSD license below:
|
|
*
|
|
* Redistribution and use in source and binary forms, with or
|
|
* without modification, are permitted provided that the following
|
|
* conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer.
|
|
*
|
|
* - Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials
|
|
* provided with the distribution.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
/*
|
|
* This file contains all of the code that is specific to the
|
|
* QLogic_IB 6120 PCIe chip.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <rdma/ib_verbs.h>
|
|
|
|
#include "qib.h"
|
|
#include "qib_6120_regs.h"
|
|
|
|
static void qib_6120_setup_setextled(struct qib_pportdata *, u32);
|
|
static void sendctrl_6120_mod(struct qib_pportdata *ppd, u32 op);
|
|
static u8 qib_6120_phys_portstate(u64);
|
|
static u32 qib_6120_iblink_state(u64);
|
|
|
|
/*
|
|
* This file contains all the chip-specific register information and
|
|
* access functions for the Intel Intel_IB PCI-Express chip.
|
|
*
|
|
*/
|
|
|
|
/* KREG_IDX uses machine-generated #defines */
|
|
#define KREG_IDX(regname) (QIB_6120_##regname##_OFFS / sizeof(u64))
|
|
|
|
/* Use defines to tie machine-generated names to lower-case names */
|
|
#define kr_extctrl KREG_IDX(EXTCtrl)
|
|
#define kr_extstatus KREG_IDX(EXTStatus)
|
|
#define kr_gpio_clear KREG_IDX(GPIOClear)
|
|
#define kr_gpio_mask KREG_IDX(GPIOMask)
|
|
#define kr_gpio_out KREG_IDX(GPIOOut)
|
|
#define kr_gpio_status KREG_IDX(GPIOStatus)
|
|
#define kr_rcvctrl KREG_IDX(RcvCtrl)
|
|
#define kr_sendctrl KREG_IDX(SendCtrl)
|
|
#define kr_partitionkey KREG_IDX(RcvPartitionKey)
|
|
#define kr_hwdiagctrl KREG_IDX(HwDiagCtrl)
|
|
#define kr_ibcstatus KREG_IDX(IBCStatus)
|
|
#define kr_ibcctrl KREG_IDX(IBCCtrl)
|
|
#define kr_sendbuffererror KREG_IDX(SendBufErr0)
|
|
#define kr_rcvbthqp KREG_IDX(RcvBTHQP)
|
|
#define kr_counterregbase KREG_IDX(CntrRegBase)
|
|
#define kr_palign KREG_IDX(PageAlign)
|
|
#define kr_rcvegrbase KREG_IDX(RcvEgrBase)
|
|
#define kr_rcvegrcnt KREG_IDX(RcvEgrCnt)
|
|
#define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt)
|
|
#define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize)
|
|
#define kr_rcvhdrsize KREG_IDX(RcvHdrSize)
|
|
#define kr_rcvtidbase KREG_IDX(RcvTIDBase)
|
|
#define kr_rcvtidcnt KREG_IDX(RcvTIDCnt)
|
|
#define kr_scratch KREG_IDX(Scratch)
|
|
#define kr_sendctrl KREG_IDX(SendCtrl)
|
|
#define kr_sendpioavailaddr KREG_IDX(SendPIOAvailAddr)
|
|
#define kr_sendpiobufbase KREG_IDX(SendPIOBufBase)
|
|
#define kr_sendpiobufcnt KREG_IDX(SendPIOBufCnt)
|
|
#define kr_sendpiosize KREG_IDX(SendPIOSize)
|
|
#define kr_sendregbase KREG_IDX(SendRegBase)
|
|
#define kr_userregbase KREG_IDX(UserRegBase)
|
|
#define kr_control KREG_IDX(Control)
|
|
#define kr_intclear KREG_IDX(IntClear)
|
|
#define kr_intmask KREG_IDX(IntMask)
|
|
#define kr_intstatus KREG_IDX(IntStatus)
|
|
#define kr_errclear KREG_IDX(ErrClear)
|
|
#define kr_errmask KREG_IDX(ErrMask)
|
|
#define kr_errstatus KREG_IDX(ErrStatus)
|
|
#define kr_hwerrclear KREG_IDX(HwErrClear)
|
|
#define kr_hwerrmask KREG_IDX(HwErrMask)
|
|
#define kr_hwerrstatus KREG_IDX(HwErrStatus)
|
|
#define kr_revision KREG_IDX(Revision)
|
|
#define kr_portcnt KREG_IDX(PortCnt)
|
|
#define kr_serdes_cfg0 KREG_IDX(SerdesCfg0)
|
|
#define kr_serdes_cfg1 (kr_serdes_cfg0 + 1)
|
|
#define kr_serdes_stat KREG_IDX(SerdesStat)
|
|
#define kr_xgxs_cfg KREG_IDX(XGXSCfg)
|
|
|
|
/* These must only be written via qib_write_kreg_ctxt() */
|
|
#define kr_rcvhdraddr KREG_IDX(RcvHdrAddr0)
|
|
#define kr_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0)
|
|
|
|
#define CREG_IDX(regname) ((QIB_6120_##regname##_OFFS - \
|
|
QIB_6120_LBIntCnt_OFFS) / sizeof(u64))
|
|
|
|
#define cr_badformat CREG_IDX(RxBadFormatCnt)
|
|
#define cr_erricrc CREG_IDX(RxICRCErrCnt)
|
|
#define cr_errlink CREG_IDX(RxLinkProblemCnt)
|
|
#define cr_errlpcrc CREG_IDX(RxLPCRCErrCnt)
|
|
#define cr_errpkey CREG_IDX(RxPKeyMismatchCnt)
|
|
#define cr_rcvflowctrl_err CREG_IDX(RxFlowCtrlErrCnt)
|
|
#define cr_err_rlen CREG_IDX(RxLenErrCnt)
|
|
#define cr_errslen CREG_IDX(TxLenErrCnt)
|
|
#define cr_errtidfull CREG_IDX(RxTIDFullErrCnt)
|
|
#define cr_errtidvalid CREG_IDX(RxTIDValidErrCnt)
|
|
#define cr_errvcrc CREG_IDX(RxVCRCErrCnt)
|
|
#define cr_ibstatuschange CREG_IDX(IBStatusChangeCnt)
|
|
#define cr_lbint CREG_IDX(LBIntCnt)
|
|
#define cr_invalidrlen CREG_IDX(RxMaxMinLenErrCnt)
|
|
#define cr_invalidslen CREG_IDX(TxMaxMinLenErrCnt)
|
|
#define cr_lbflowstall CREG_IDX(LBFlowStallCnt)
|
|
#define cr_pktrcv CREG_IDX(RxDataPktCnt)
|
|
#define cr_pktrcvflowctrl CREG_IDX(RxFlowPktCnt)
|
|
#define cr_pktsend CREG_IDX(TxDataPktCnt)
|
|
#define cr_pktsendflow CREG_IDX(TxFlowPktCnt)
|
|
#define cr_portovfl CREG_IDX(RxP0HdrEgrOvflCnt)
|
|
#define cr_rcvebp CREG_IDX(RxEBPCnt)
|
|
#define cr_rcvovfl CREG_IDX(RxBufOvflCnt)
|
|
#define cr_senddropped CREG_IDX(TxDroppedPktCnt)
|
|
#define cr_sendstall CREG_IDX(TxFlowStallCnt)
|
|
#define cr_sendunderrun CREG_IDX(TxUnderrunCnt)
|
|
#define cr_wordrcv CREG_IDX(RxDwordCnt)
|
|
#define cr_wordsend CREG_IDX(TxDwordCnt)
|
|
#define cr_txunsupvl CREG_IDX(TxUnsupVLErrCnt)
|
|
#define cr_rxdroppkt CREG_IDX(RxDroppedPktCnt)
|
|
#define cr_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt)
|
|
#define cr_iblinkdown CREG_IDX(IBLinkDownedCnt)
|
|
#define cr_ibsymbolerr CREG_IDX(IBSymbolErrCnt)
|
|
|
|
#define SYM_RMASK(regname, fldname) ((u64) \
|
|
QIB_6120_##regname##_##fldname##_RMASK)
|
|
#define SYM_MASK(regname, fldname) ((u64) \
|
|
QIB_6120_##regname##_##fldname##_RMASK << \
|
|
QIB_6120_##regname##_##fldname##_LSB)
|
|
#define SYM_LSB(regname, fldname) (QIB_6120_##regname##_##fldname##_LSB)
|
|
|
|
#define SYM_FIELD(value, regname, fldname) ((u64) \
|
|
(((value) >> SYM_LSB(regname, fldname)) & \
|
|
SYM_RMASK(regname, fldname)))
|
|
#define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask)
|
|
#define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask)
|
|
|
|
/* link training states, from IBC */
|
|
#define IB_6120_LT_STATE_DISABLED 0x00
|
|
#define IB_6120_LT_STATE_LINKUP 0x01
|
|
#define IB_6120_LT_STATE_POLLACTIVE 0x02
|
|
#define IB_6120_LT_STATE_POLLQUIET 0x03
|
|
#define IB_6120_LT_STATE_SLEEPDELAY 0x04
|
|
#define IB_6120_LT_STATE_SLEEPQUIET 0x05
|
|
#define IB_6120_LT_STATE_CFGDEBOUNCE 0x08
|
|
#define IB_6120_LT_STATE_CFGRCVFCFG 0x09
|
|
#define IB_6120_LT_STATE_CFGWAITRMT 0x0a
|
|
#define IB_6120_LT_STATE_CFGIDLE 0x0b
|
|
#define IB_6120_LT_STATE_RECOVERRETRAIN 0x0c
|
|
#define IB_6120_LT_STATE_RECOVERWAITRMT 0x0e
|
|
#define IB_6120_LT_STATE_RECOVERIDLE 0x0f
|
|
|
|
/* link state machine states from IBC */
|
|
#define IB_6120_L_STATE_DOWN 0x0
|
|
#define IB_6120_L_STATE_INIT 0x1
|
|
#define IB_6120_L_STATE_ARM 0x2
|
|
#define IB_6120_L_STATE_ACTIVE 0x3
|
|
#define IB_6120_L_STATE_ACT_DEFER 0x4
|
|
|
|
static const u8 qib_6120_physportstate[0x20] = {
|
|
[IB_6120_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED,
|
|
[IB_6120_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP,
|
|
[IB_6120_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL,
|
|
[IB_6120_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL,
|
|
[IB_6120_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP,
|
|
[IB_6120_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP,
|
|
[IB_6120_LT_STATE_CFGDEBOUNCE] =
|
|
IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[IB_6120_LT_STATE_CFGRCVFCFG] =
|
|
IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[IB_6120_LT_STATE_CFGWAITRMT] =
|
|
IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[IB_6120_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[IB_6120_LT_STATE_RECOVERRETRAIN] =
|
|
IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
|
|
[IB_6120_LT_STATE_RECOVERWAITRMT] =
|
|
IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
|
|
[IB_6120_LT_STATE_RECOVERIDLE] =
|
|
IB_PHYSPORTSTATE_LINK_ERR_RECOVER,
|
|
[0x10] = IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[0x11] = IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[0x12] = IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[0x13] = IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[0x14] = IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[0x15] = IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[0x16] = IB_PHYSPORTSTATE_CFG_TRAIN,
|
|
[0x17] = IB_PHYSPORTSTATE_CFG_TRAIN
|
|
};
|
|
|
|
|
|
struct qib_chip_specific {
|
|
u64 __iomem *cregbase;
|
|
u64 *cntrs;
|
|
u64 *portcntrs;
|
|
void *dummy_hdrq; /* used after ctxt close */
|
|
dma_addr_t dummy_hdrq_phys;
|
|
spinlock_t kernel_tid_lock; /* no back to back kernel TID writes */
|
|
spinlock_t user_tid_lock; /* no back to back user TID writes */
|
|
spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */
|
|
spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */
|
|
u64 hwerrmask;
|
|
u64 errormask;
|
|
u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */
|
|
u64 gpio_mask; /* shadow the gpio mask register */
|
|
u64 extctrl; /* shadow the gpio output enable, etc... */
|
|
/*
|
|
* these 5 fields are used to establish deltas for IB symbol
|
|
* errors and linkrecovery errors. They can be reported on
|
|
* some chips during link negotiation prior to INIT, and with
|
|
* DDR when faking DDR negotiations with non-IBTA switches.
|
|
* The chip counters are adjusted at driver unload if there is
|
|
* a non-zero delta.
|
|
*/
|
|
u64 ibdeltainprog;
|
|
u64 ibsymdelta;
|
|
u64 ibsymsnap;
|
|
u64 iblnkerrdelta;
|
|
u64 iblnkerrsnap;
|
|
u64 ibcctrl; /* shadow for kr_ibcctrl */
|
|
u32 lastlinkrecov; /* link recovery issue */
|
|
int irq;
|
|
u32 cntrnamelen;
|
|
u32 portcntrnamelen;
|
|
u32 ncntrs;
|
|
u32 nportcntrs;
|
|
/* used with gpio interrupts to implement IB counters */
|
|
u32 rxfc_unsupvl_errs;
|
|
u32 overrun_thresh_errs;
|
|
/*
|
|
* these count only cases where _successive_ LocalLinkIntegrity
|
|
* errors were seen in the receive headers of IB standard packets
|
|
*/
|
|
u32 lli_errs;
|
|
u32 lli_counter;
|
|
u64 lli_thresh;
|
|
u64 sword; /* total dwords sent (sample result) */
|
|
u64 rword; /* total dwords received (sample result) */
|
|
u64 spkts; /* total packets sent (sample result) */
|
|
u64 rpkts; /* total packets received (sample result) */
|
|
u64 xmit_wait; /* # of ticks no data sent (sample result) */
|
|
struct timer_list pma_timer;
|
|
char emsgbuf[128];
|
|
char bitsmsgbuf[64];
|
|
u8 pma_sample_status;
|
|
};
|
|
|
|
/* ibcctrl bits */
|
|
#define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1
|
|
/* cycle through TS1/TS2 till OK */
|
|
#define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2
|
|
/* wait for TS1, then go on */
|
|
#define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3
|
|
#define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16
|
|
|
|
#define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */
|
|
#define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */
|
|
#define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */
|
|
#define QLOGIC_IB_IBCC_LINKCMD_SHIFT 18
|
|
|
|
/*
|
|
* We could have a single register get/put routine, that takes a group type,
|
|
* but this is somewhat clearer and cleaner. It also gives us some error
|
|
* checking. 64 bit register reads should always work, but are inefficient
|
|
* on opteron (the northbridge always generates 2 separate HT 32 bit reads),
|
|
* so we use kreg32 wherever possible. User register and counter register
|
|
* reads are always 32 bit reads, so only one form of those routines.
|
|
*/
|
|
|
|
/**
|
|
* qib_read_ureg32 - read 32-bit virtualized per-context register
|
|
* @dd: device
|
|
* @regno: register number
|
|
* @ctxt: context number
|
|
*
|
|
* Return the contents of a register that is virtualized to be per context.
|
|
* Returns -1 on errors (not distinguishable from valid contents at
|
|
* runtime; we may add a separate error variable at some point).
|
|
*/
|
|
static inline u32 qib_read_ureg32(const struct qib_devdata *dd,
|
|
enum qib_ureg regno, int ctxt)
|
|
{
|
|
if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
|
|
return 0;
|
|
|
|
if (dd->userbase)
|
|
return readl(regno + (u64 __iomem *)
|
|
((char __iomem *)dd->userbase +
|
|
dd->ureg_align * ctxt));
|
|
else
|
|
return readl(regno + (u64 __iomem *)
|
|
(dd->uregbase +
|
|
(char __iomem *)dd->kregbase +
|
|
dd->ureg_align * ctxt));
|
|
}
|
|
|
|
/**
|
|
* qib_write_ureg - write 32-bit virtualized per-context register
|
|
* @dd: device
|
|
* @regno: register number
|
|
* @value: value
|
|
* @ctxt: context
|
|
*
|
|
* Write the contents of a register that is virtualized to be per context.
|
|
*/
|
|
static inline void qib_write_ureg(const struct qib_devdata *dd,
|
|
enum qib_ureg regno, u64 value, int ctxt)
|
|
{
|
|
u64 __iomem *ubase;
|
|
if (dd->userbase)
|
|
ubase = (u64 __iomem *)
|
|
((char __iomem *) dd->userbase +
|
|
dd->ureg_align * ctxt);
|
|
else
|
|
ubase = (u64 __iomem *)
|
|
(dd->uregbase +
|
|
(char __iomem *) dd->kregbase +
|
|
dd->ureg_align * ctxt);
|
|
|
|
if (dd->kregbase && (dd->flags & QIB_PRESENT))
|
|
writeq(value, &ubase[regno]);
|
|
}
|
|
|
|
static inline u32 qib_read_kreg32(const struct qib_devdata *dd,
|
|
const u16 regno)
|
|
{
|
|
if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
|
|
return -1;
|
|
return readl((u32 __iomem *)&dd->kregbase[regno]);
|
|
}
|
|
|
|
static inline u64 qib_read_kreg64(const struct qib_devdata *dd,
|
|
const u16 regno)
|
|
{
|
|
if (!dd->kregbase || !(dd->flags & QIB_PRESENT))
|
|
return -1;
|
|
|
|
return readq(&dd->kregbase[regno]);
|
|
}
|
|
|
|
static inline void qib_write_kreg(const struct qib_devdata *dd,
|
|
const u16 regno, u64 value)
|
|
{
|
|
if (dd->kregbase && (dd->flags & QIB_PRESENT))
|
|
writeq(value, &dd->kregbase[regno]);
|
|
}
|
|
|
|
/**
|
|
* qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register
|
|
* @dd: the qlogic_ib device
|
|
* @regno: the register number to write
|
|
* @ctxt: the context containing the register
|
|
* @value: the value to write
|
|
*/
|
|
static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd,
|
|
const u16 regno, unsigned ctxt,
|
|
u64 value)
|
|
{
|
|
qib_write_kreg(dd, regno + ctxt, value);
|
|
}
|
|
|
|
static inline void write_6120_creg(const struct qib_devdata *dd,
|
|
u16 regno, u64 value)
|
|
{
|
|
if (dd->cspec->cregbase && (dd->flags & QIB_PRESENT))
|
|
writeq(value, &dd->cspec->cregbase[regno]);
|
|
}
|
|
|
|
static inline u64 read_6120_creg(const struct qib_devdata *dd, u16 regno)
|
|
{
|
|
if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
|
|
return 0;
|
|
return readq(&dd->cspec->cregbase[regno]);
|
|
}
|
|
|
|
static inline u32 read_6120_creg32(const struct qib_devdata *dd, u16 regno)
|
|
{
|
|
if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT))
|
|
return 0;
|
|
return readl(&dd->cspec->cregbase[regno]);
|
|
}
|
|
|
|
/* kr_control bits */
|
|
#define QLOGIC_IB_C_RESET 1U
|
|
|
|
/* kr_intstatus, kr_intclear, kr_intmask bits */
|
|
#define QLOGIC_IB_I_RCVURG_MASK ((1U << 5) - 1)
|
|
#define QLOGIC_IB_I_RCVURG_SHIFT 0
|
|
#define QLOGIC_IB_I_RCVAVAIL_MASK ((1U << 5) - 1)
|
|
#define QLOGIC_IB_I_RCVAVAIL_SHIFT 12
|
|
|
|
#define QLOGIC_IB_C_FREEZEMODE 0x00000002
|
|
#define QLOGIC_IB_C_LINKENABLE 0x00000004
|
|
#define QLOGIC_IB_I_ERROR 0x0000000080000000ULL
|
|
#define QLOGIC_IB_I_SPIOSENT 0x0000000040000000ULL
|
|
#define QLOGIC_IB_I_SPIOBUFAVAIL 0x0000000020000000ULL
|
|
#define QLOGIC_IB_I_GPIO 0x0000000010000000ULL
|
|
#define QLOGIC_IB_I_BITSEXTANT \
|
|
((QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT) | \
|
|
(QLOGIC_IB_I_RCVAVAIL_MASK << \
|
|
QLOGIC_IB_I_RCVAVAIL_SHIFT) | \
|
|
QLOGIC_IB_I_ERROR | QLOGIC_IB_I_SPIOSENT | \
|
|
QLOGIC_IB_I_SPIOBUFAVAIL | QLOGIC_IB_I_GPIO)
|
|
|
|
/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */
|
|
#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK 0x000000000000003fULL
|
|
#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT 0
|
|
#define QLOGIC_IB_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL
|
|
#define QLOGIC_IB_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL
|
|
#define QLOGIC_IB_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL
|
|
#define QLOGIC_IB_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL
|
|
#define QLOGIC_IB_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL
|
|
#define QLOGIC_IB_HWE_COREPLL_FBSLIP 0x0080000000000000ULL
|
|
#define QLOGIC_IB_HWE_COREPLL_RFSLIP 0x0100000000000000ULL
|
|
#define QLOGIC_IB_HWE_PCIE1PLLFAILED 0x0400000000000000ULL
|
|
#define QLOGIC_IB_HWE_PCIE0PLLFAILED 0x0800000000000000ULL
|
|
#define QLOGIC_IB_HWE_SERDESPLLFAILED 0x1000000000000000ULL
|
|
|
|
|
|
/* kr_extstatus bits */
|
|
#define QLOGIC_IB_EXTS_FREQSEL 0x2
|
|
#define QLOGIC_IB_EXTS_SERDESSEL 0x4
|
|
#define QLOGIC_IB_EXTS_MEMBIST_ENDTEST 0x0000000000004000
|
|
#define QLOGIC_IB_EXTS_MEMBIST_FOUND 0x0000000000008000
|
|
|
|
/* kr_xgxsconfig bits */
|
|
#define QLOGIC_IB_XGXS_RESET 0x5ULL
|
|
|
|
#define _QIB_GPIO_SDA_NUM 1
|
|
#define _QIB_GPIO_SCL_NUM 0
|
|
|
|
/* Bits in GPIO for the added IB link interrupts */
|
|
#define GPIO_RXUVL_BIT 3
|
|
#define GPIO_OVRUN_BIT 4
|
|
#define GPIO_LLI_BIT 5
|
|
#define GPIO_ERRINTR_MASK 0x38
|
|
|
|
|
|
#define QLOGIC_IB_RT_BUFSIZE_MASK 0xe0000000ULL
|
|
#define QLOGIC_IB_RT_BUFSIZE_SHIFTVAL(tid) \
|
|
((((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) >> 29) + 11 - 1)
|
|
#define QLOGIC_IB_RT_BUFSIZE(tid) (1 << QLOGIC_IB_RT_BUFSIZE_SHIFTVAL(tid))
|
|
#define QLOGIC_IB_RT_IS_VALID(tid) \
|
|
(((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) && \
|
|
((((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) != QLOGIC_IB_RT_BUFSIZE_MASK)))
|
|
#define QLOGIC_IB_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */
|
|
#define QLOGIC_IB_RT_ADDR_SHIFT 10
|
|
|
|
#define QLOGIC_IB_R_INTRAVAIL_SHIFT 16
|
|
#define QLOGIC_IB_R_TAILUPD_SHIFT 31
|
|
#define IBA6120_R_PKEY_DIS_SHIFT 30
|
|
|
|
#define PBC_6120_VL15_SEND_CTRL (1ULL << 31) /* pbc; VL15; link_buf only */
|
|
|
|
#define IBCBUSFRSPCPARITYERR HWE_MASK(IBCBusFromSPCParityErr)
|
|
#define IBCBUSTOSPCPARITYERR HWE_MASK(IBCBusToSPCParityErr)
|
|
|
|
#define SYM_MASK_BIT(regname, fldname, bit) ((u64) \
|
|
((1ULL << (SYM_LSB(regname, fldname) + (bit)))))
|
|
|
|
#define TXEMEMPARITYERR_PIOBUF \
|
|
SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 0)
|
|
#define TXEMEMPARITYERR_PIOPBC \
|
|
SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 1)
|
|
#define TXEMEMPARITYERR_PIOLAUNCHFIFO \
|
|
SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 2)
|
|
|
|
#define RXEMEMPARITYERR_RCVBUF \
|
|
SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 0)
|
|
#define RXEMEMPARITYERR_LOOKUPQ \
|
|
SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 1)
|
|
#define RXEMEMPARITYERR_EXPTID \
|
|
SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 2)
|
|
#define RXEMEMPARITYERR_EAGERTID \
|
|
SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 3)
|
|
#define RXEMEMPARITYERR_FLAGBUF \
|
|
SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 4)
|
|
#define RXEMEMPARITYERR_DATAINFO \
|
|
SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 5)
|
|
#define RXEMEMPARITYERR_HDRINFO \
|
|
SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 6)
|
|
|
|
/* 6120 specific hardware errors... */
|
|
static const struct qib_hwerror_msgs qib_6120_hwerror_msgs[] = {
|
|
/* generic hardware errors */
|
|
QLOGIC_IB_HWE_MSG(IBCBUSFRSPCPARITYERR, "QIB2IB Parity"),
|
|
QLOGIC_IB_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2QIB Parity"),
|
|
|
|
QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOBUF,
|
|
"TXE PIOBUF Memory Parity"),
|
|
QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOPBC,
|
|
"TXE PIOPBC Memory Parity"),
|
|
QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOLAUNCHFIFO,
|
|
"TXE PIOLAUNCHFIFO Memory Parity"),
|
|
|
|
QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_RCVBUF,
|
|
"RXE RCVBUF Memory Parity"),
|
|
QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_LOOKUPQ,
|
|
"RXE LOOKUPQ Memory Parity"),
|
|
QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EAGERTID,
|
|
"RXE EAGERTID Memory Parity"),
|
|
QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EXPTID,
|
|
"RXE EXPTID Memory Parity"),
|
|
QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_FLAGBUF,
|
|
"RXE FLAGBUF Memory Parity"),
|
|
QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_DATAINFO,
|
|
"RXE DATAINFO Memory Parity"),
|
|
QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_HDRINFO,
|
|
"RXE HDRINFO Memory Parity"),
|
|
|
|
/* chip-specific hardware errors */
|
|
QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEPOISONEDTLP,
|
|
"PCIe Poisoned TLP"),
|
|
QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLTIMEOUT,
|
|
"PCIe completion timeout"),
|
|
/*
|
|
* In practice, it's unlikely wthat we'll see PCIe PLL, or bus
|
|
* parity or memory parity error failures, because most likely we
|
|
* won't be able to talk to the core of the chip. Nonetheless, we
|
|
* might see them, if they are in parts of the PCIe core that aren't
|
|
* essential.
|
|
*/
|
|
QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE1PLLFAILED,
|
|
"PCIePLL1"),
|
|
QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE0PLLFAILED,
|
|
"PCIePLL0"),
|
|
QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXTLH,
|
|
"PCIe XTLH core parity"),
|
|
QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXADM,
|
|
"PCIe ADM TX core parity"),
|
|
QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYRADM,
|
|
"PCIe ADM RX core parity"),
|
|
QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SERDESPLLFAILED,
|
|
"SerDes PLL"),
|
|
};
|
|
|
|
#define TXE_PIO_PARITY (TXEMEMPARITYERR_PIOBUF | TXEMEMPARITYERR_PIOPBC)
|
|
#define _QIB_PLL_FAIL (QLOGIC_IB_HWE_COREPLL_FBSLIP | \
|
|
QLOGIC_IB_HWE_COREPLL_RFSLIP)
|
|
|
|
/* variables for sanity checking interrupt and errors */
|
|
#define IB_HWE_BITSEXTANT \
|
|
(HWE_MASK(RXEMemParityErr) | \
|
|
HWE_MASK(TXEMemParityErr) | \
|
|
(QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK << \
|
|
QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) | \
|
|
QLOGIC_IB_HWE_PCIE1PLLFAILED | \
|
|
QLOGIC_IB_HWE_PCIE0PLLFAILED | \
|
|
QLOGIC_IB_HWE_PCIEPOISONEDTLP | \
|
|
QLOGIC_IB_HWE_PCIECPLTIMEOUT | \
|
|
QLOGIC_IB_HWE_PCIEBUSPARITYXTLH | \
|
|
QLOGIC_IB_HWE_PCIEBUSPARITYXADM | \
|
|
QLOGIC_IB_HWE_PCIEBUSPARITYRADM | \
|
|
HWE_MASK(PowerOnBISTFailed) | \
|
|
QLOGIC_IB_HWE_COREPLL_FBSLIP | \
|
|
QLOGIC_IB_HWE_COREPLL_RFSLIP | \
|
|
QLOGIC_IB_HWE_SERDESPLLFAILED | \
|
|
HWE_MASK(IBCBusToSPCParityErr) | \
|
|
HWE_MASK(IBCBusFromSPCParityErr))
|
|
|
|
#define IB_E_BITSEXTANT \
|
|
(ERR_MASK(RcvFormatErr) | ERR_MASK(RcvVCRCErr) | \
|
|
ERR_MASK(RcvICRCErr) | ERR_MASK(RcvMinPktLenErr) | \
|
|
ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvLongPktLenErr) | \
|
|
ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvUnexpectedCharErr) | \
|
|
ERR_MASK(RcvUnsupportedVLErr) | ERR_MASK(RcvEBPErr) | \
|
|
ERR_MASK(RcvIBFlowErr) | ERR_MASK(RcvBadVersionErr) | \
|
|
ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) | \
|
|
ERR_MASK(RcvBadTidErr) | ERR_MASK(RcvHdrLenErr) | \
|
|
ERR_MASK(RcvHdrErr) | ERR_MASK(RcvIBLostLinkErr) | \
|
|
ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendMaxPktLenErr) | \
|
|
ERR_MASK(SendUnderRunErr) | ERR_MASK(SendPktLenErr) | \
|
|
ERR_MASK(SendDroppedSmpPktErr) | \
|
|
ERR_MASK(SendDroppedDataPktErr) | \
|
|
ERR_MASK(SendPioArmLaunchErr) | \
|
|
ERR_MASK(SendUnexpectedPktNumErr) | \
|
|
ERR_MASK(SendUnsupportedVLErr) | ERR_MASK(IBStatusChanged) | \
|
|
ERR_MASK(InvalidAddrErr) | ERR_MASK(ResetNegated) | \
|
|
ERR_MASK(HardwareErr))
|
|
|
|
#define QLOGIC_IB_E_PKTERRS ( \
|
|
ERR_MASK(SendPktLenErr) | \
|
|
ERR_MASK(SendDroppedDataPktErr) | \
|
|
ERR_MASK(RcvVCRCErr) | \
|
|
ERR_MASK(RcvICRCErr) | \
|
|
ERR_MASK(RcvShortPktLenErr) | \
|
|
ERR_MASK(RcvEBPErr))
|
|
|
|
/* These are all rcv-related errors which we want to count for stats */
|
|
#define E_SUM_PKTERRS \
|
|
(ERR_MASK(RcvHdrLenErr) | ERR_MASK(RcvBadTidErr) | \
|
|
ERR_MASK(RcvBadVersionErr) | ERR_MASK(RcvHdrErr) | \
|
|
ERR_MASK(RcvLongPktLenErr) | ERR_MASK(RcvShortPktLenErr) | \
|
|
ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \
|
|
ERR_MASK(RcvFormatErr) | ERR_MASK(RcvUnsupportedVLErr) | \
|
|
ERR_MASK(RcvUnexpectedCharErr) | ERR_MASK(RcvEBPErr))
|
|
|
|
/* These are all send-related errors which we want to count for stats */
|
|
#define E_SUM_ERRS \
|
|
(ERR_MASK(SendPioArmLaunchErr) | \
|
|
ERR_MASK(SendUnexpectedPktNumErr) | \
|
|
ERR_MASK(SendDroppedDataPktErr) | \
|
|
ERR_MASK(SendDroppedSmpPktErr) | \
|
|
ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnsupportedVLErr) | \
|
|
ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \
|
|
ERR_MASK(InvalidAddrErr))
|
|
|
|
/*
|
|
* this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore
|
|
* errors not related to freeze and cancelling buffers. Can't ignore
|
|
* armlaunch because could get more while still cleaning up, and need
|
|
* to cancel those as they happen.
|
|
*/
|
|
#define E_SPKT_ERRS_IGNORE \
|
|
(ERR_MASK(SendDroppedDataPktErr) | \
|
|
ERR_MASK(SendDroppedSmpPktErr) | \
|
|
ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendMinPktLenErr) | \
|
|
ERR_MASK(SendPktLenErr))
|
|
|
|
/*
|
|
* these are errors that can occur when the link changes state while
|
|
* a packet is being sent or received. This doesn't cover things
|
|
* like EBP or VCRC that can be the result of a sending having the
|
|
* link change state, so we receive a "known bad" packet.
|
|
*/
|
|
#define E_SUM_LINK_PKTERRS \
|
|
(ERR_MASK(SendDroppedDataPktErr) | \
|
|
ERR_MASK(SendDroppedSmpPktErr) | \
|
|
ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \
|
|
ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \
|
|
ERR_MASK(RcvUnexpectedCharErr))
|
|
|
|
static void qib_6120_put_tid_2(struct qib_devdata *, u64 __iomem *,
|
|
u32, unsigned long);
|
|
|
|
/*
|
|
* On platforms using this chip, and not having ordered WC stores, we
|
|
* can get TXE parity errors due to speculative reads to the PIO buffers,
|
|
* and this, due to a chip issue can result in (many) false parity error
|
|
* reports. So it's a debug print on those, and an info print on systems
|
|
* where the speculative reads don't occur.
|
|
*/
|
|
static void qib_6120_txe_recover(struct qib_devdata *dd)
|
|
{
|
|
if (!qib_unordered_wc())
|
|
qib_devinfo(dd->pcidev,
|
|
"Recovering from TXE PIO parity error\n");
|
|
}
|
|
|
|
/* enable/disable chip from delivering interrupts */
|
|
static void qib_6120_set_intr_state(struct qib_devdata *dd, u32 enable)
|
|
{
|
|
if (enable) {
|
|
if (dd->flags & QIB_BADINTR)
|
|
return;
|
|
qib_write_kreg(dd, kr_intmask, ~0ULL);
|
|
/* force re-interrupt of any pending interrupts. */
|
|
qib_write_kreg(dd, kr_intclear, 0ULL);
|
|
} else
|
|
qib_write_kreg(dd, kr_intmask, 0ULL);
|
|
}
|
|
|
|
/*
|
|
* Try to cleanup as much as possible for anything that might have gone
|
|
* wrong while in freeze mode, such as pio buffers being written by user
|
|
* processes (causing armlaunch), send errors due to going into freeze mode,
|
|
* etc., and try to avoid causing extra interrupts while doing so.
|
|
* Forcibly update the in-memory pioavail register copies after cleanup
|
|
* because the chip won't do it while in freeze mode (the register values
|
|
* themselves are kept correct).
|
|
* Make sure that we don't lose any important interrupts by using the chip
|
|
* feature that says that writing 0 to a bit in *clear that is set in
|
|
* *status will cause an interrupt to be generated again (if allowed by
|
|
* the *mask value).
|
|
* This is in chip-specific code because of all of the register accesses,
|
|
* even though the details are similar on most chips
|
|
*/
|
|
static void qib_6120_clear_freeze(struct qib_devdata *dd)
|
|
{
|
|
/* disable error interrupts, to avoid confusion */
|
|
qib_write_kreg(dd, kr_errmask, 0ULL);
|
|
|
|
/* also disable interrupts; errormask is sometimes overwriten */
|
|
qib_6120_set_intr_state(dd, 0);
|
|
|
|
qib_cancel_sends(dd->pport);
|
|
|
|
/* clear the freeze, and be sure chip saw it */
|
|
qib_write_kreg(dd, kr_control, dd->control);
|
|
qib_read_kreg32(dd, kr_scratch);
|
|
|
|
/* force in-memory update now we are out of freeze */
|
|
qib_force_pio_avail_update(dd);
|
|
|
|
/*
|
|
* force new interrupt if any hwerr, error or interrupt bits are
|
|
* still set, and clear "safe" send packet errors related to freeze
|
|
* and cancelling sends. Re-enable error interrupts before possible
|
|
* force of re-interrupt on pending interrupts.
|
|
*/
|
|
qib_write_kreg(dd, kr_hwerrclear, 0ULL);
|
|
qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE);
|
|
qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
|
|
qib_6120_set_intr_state(dd, 1);
|
|
}
|
|
|
|
/**
|
|
* qib_handle_6120_hwerrors - display hardware errors.
|
|
* @dd: the qlogic_ib device
|
|
* @msg: the output buffer
|
|
* @msgl: the size of the output buffer
|
|
*
|
|
* Use same msg buffer as regular errors to avoid excessive stack
|
|
* use. Most hardware errors are catastrophic, but for right now,
|
|
* we'll print them and continue. Reuse the same message buffer as
|
|
* handle_6120_errors() to avoid excessive stack usage.
|
|
*/
|
|
static void qib_handle_6120_hwerrors(struct qib_devdata *dd, char *msg,
|
|
size_t msgl)
|
|
{
|
|
u64 hwerrs;
|
|
u32 bits, ctrl;
|
|
int isfatal = 0;
|
|
char *bitsmsg;
|
|
int log_idx;
|
|
|
|
hwerrs = qib_read_kreg64(dd, kr_hwerrstatus);
|
|
if (!hwerrs)
|
|
return;
|
|
if (hwerrs == ~0ULL) {
|
|
qib_dev_err(dd,
|
|
"Read of hardware error status failed (all bits set); ignoring\n");
|
|
return;
|
|
}
|
|
qib_stats.sps_hwerrs++;
|
|
|
|
/* Always clear the error status register, except MEMBISTFAIL,
|
|
* regardless of whether we continue or stop using the chip.
|
|
* We want that set so we know it failed, even across driver reload.
|
|
* We'll still ignore it in the hwerrmask. We do this partly for
|
|
* diagnostics, but also for support */
|
|
qib_write_kreg(dd, kr_hwerrclear,
|
|
hwerrs & ~HWE_MASK(PowerOnBISTFailed));
|
|
|
|
hwerrs &= dd->cspec->hwerrmask;
|
|
|
|
/* We log some errors to EEPROM, check if we have any of those. */
|
|
for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx)
|
|
if (hwerrs & dd->eep_st_masks[log_idx].hwerrs_to_log)
|
|
qib_inc_eeprom_err(dd, log_idx, 1);
|
|
|
|
/*
|
|
* Make sure we get this much out, unless told to be quiet,
|
|
* or it's occurred within the last 5 seconds.
|
|
*/
|
|
if (hwerrs & ~(TXE_PIO_PARITY | RXEMEMPARITYERR_EAGERTID))
|
|
qib_devinfo(dd->pcidev,
|
|
"Hardware error: hwerr=0x%llx (cleared)\n",
|
|
(unsigned long long) hwerrs);
|
|
|
|
if (hwerrs & ~IB_HWE_BITSEXTANT)
|
|
qib_dev_err(dd,
|
|
"hwerror interrupt with unknown errors %llx set\n",
|
|
(unsigned long long)(hwerrs & ~IB_HWE_BITSEXTANT));
|
|
|
|
ctrl = qib_read_kreg32(dd, kr_control);
|
|
if ((ctrl & QLOGIC_IB_C_FREEZEMODE) && !dd->diag_client) {
|
|
/*
|
|
* Parity errors in send memory are recoverable,
|
|
* just cancel the send (if indicated in * sendbuffererror),
|
|
* count the occurrence, unfreeze (if no other handled
|
|
* hardware error bits are set), and continue. They can
|
|
* occur if a processor speculative read is done to the PIO
|
|
* buffer while we are sending a packet, for example.
|
|
*/
|
|
if (hwerrs & TXE_PIO_PARITY) {
|
|
qib_6120_txe_recover(dd);
|
|
hwerrs &= ~TXE_PIO_PARITY;
|
|
}
|
|
|
|
if (!hwerrs) {
|
|
static u32 freeze_cnt;
|
|
|
|
freeze_cnt++;
|
|
qib_6120_clear_freeze(dd);
|
|
} else
|
|
isfatal = 1;
|
|
}
|
|
|
|
*msg = '\0';
|
|
|
|
if (hwerrs & HWE_MASK(PowerOnBISTFailed)) {
|
|
isfatal = 1;
|
|
strlcat(msg,
|
|
"[Memory BIST test failed, InfiniPath hardware unusable]",
|
|
msgl);
|
|
/* ignore from now on, so disable until driver reloaded */
|
|
dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed);
|
|
qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
|
|
}
|
|
|
|
qib_format_hwerrors(hwerrs, qib_6120_hwerror_msgs,
|
|
ARRAY_SIZE(qib_6120_hwerror_msgs), msg, msgl);
|
|
|
|
bitsmsg = dd->cspec->bitsmsgbuf;
|
|
if (hwerrs & (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK <<
|
|
QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT)) {
|
|
bits = (u32) ((hwerrs >>
|
|
QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) &
|
|
QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK);
|
|
snprintf(bitsmsg, sizeof dd->cspec->bitsmsgbuf,
|
|
"[PCIe Mem Parity Errs %x] ", bits);
|
|
strlcat(msg, bitsmsg, msgl);
|
|
}
|
|
|
|
if (hwerrs & _QIB_PLL_FAIL) {
|
|
isfatal = 1;
|
|
snprintf(bitsmsg, sizeof dd->cspec->bitsmsgbuf,
|
|
"[PLL failed (%llx), InfiniPath hardware unusable]",
|
|
(unsigned long long) hwerrs & _QIB_PLL_FAIL);
|
|
strlcat(msg, bitsmsg, msgl);
|
|
/* ignore from now on, so disable until driver reloaded */
|
|
dd->cspec->hwerrmask &= ~(hwerrs & _QIB_PLL_FAIL);
|
|
qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
|
|
}
|
|
|
|
if (hwerrs & QLOGIC_IB_HWE_SERDESPLLFAILED) {
|
|
/*
|
|
* If it occurs, it is left masked since the external
|
|
* interface is unused
|
|
*/
|
|
dd->cspec->hwerrmask &= ~QLOGIC_IB_HWE_SERDESPLLFAILED;
|
|
qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
|
|
}
|
|
|
|
if (hwerrs)
|
|
/*
|
|
* if any set that we aren't ignoring; only
|
|
* make the complaint once, in case it's stuck
|
|
* or recurring, and we get here multiple
|
|
* times.
|
|
*/
|
|
qib_dev_err(dd, "%s hardware error\n", msg);
|
|
else
|
|
*msg = 0; /* recovered from all of them */
|
|
|
|
if (isfatal && !dd->diag_client) {
|
|
qib_dev_err(dd,
|
|
"Fatal Hardware Error, no longer usable, SN %.16s\n",
|
|
dd->serial);
|
|
/*
|
|
* for /sys status file and user programs to print; if no
|
|
* trailing brace is copied, we'll know it was truncated.
|
|
*/
|
|
if (dd->freezemsg)
|
|
snprintf(dd->freezemsg, dd->freezelen,
|
|
"{%s}", msg);
|
|
qib_disable_after_error(dd);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Decode the error status into strings, deciding whether to always
|
|
* print * it or not depending on "normal packet errors" vs everything
|
|
* else. Return 1 if "real" errors, otherwise 0 if only packet
|
|
* errors, so caller can decide what to print with the string.
|
|
*/
|
|
static int qib_decode_6120_err(struct qib_devdata *dd, char *buf, size_t blen,
|
|
u64 err)
|
|
{
|
|
int iserr = 1;
|
|
|
|
*buf = '\0';
|
|
if (err & QLOGIC_IB_E_PKTERRS) {
|
|
if (!(err & ~QLOGIC_IB_E_PKTERRS))
|
|
iserr = 0;
|
|
if ((err & ERR_MASK(RcvICRCErr)) &&
|
|
!(err&(ERR_MASK(RcvVCRCErr)|ERR_MASK(RcvEBPErr))))
|
|
strlcat(buf, "CRC ", blen);
|
|
if (!iserr)
|
|
goto done;
|
|
}
|
|
if (err & ERR_MASK(RcvHdrLenErr))
|
|
strlcat(buf, "rhdrlen ", blen);
|
|
if (err & ERR_MASK(RcvBadTidErr))
|
|
strlcat(buf, "rbadtid ", blen);
|
|
if (err & ERR_MASK(RcvBadVersionErr))
|
|
strlcat(buf, "rbadversion ", blen);
|
|
if (err & ERR_MASK(RcvHdrErr))
|
|
strlcat(buf, "rhdr ", blen);
|
|
if (err & ERR_MASK(RcvLongPktLenErr))
|
|
strlcat(buf, "rlongpktlen ", blen);
|
|
if (err & ERR_MASK(RcvMaxPktLenErr))
|
|
strlcat(buf, "rmaxpktlen ", blen);
|
|
if (err & ERR_MASK(RcvMinPktLenErr))
|
|
strlcat(buf, "rminpktlen ", blen);
|
|
if (err & ERR_MASK(SendMinPktLenErr))
|
|
strlcat(buf, "sminpktlen ", blen);
|
|
if (err & ERR_MASK(RcvFormatErr))
|
|
strlcat(buf, "rformaterr ", blen);
|
|
if (err & ERR_MASK(RcvUnsupportedVLErr))
|
|
strlcat(buf, "runsupvl ", blen);
|
|
if (err & ERR_MASK(RcvUnexpectedCharErr))
|
|
strlcat(buf, "runexpchar ", blen);
|
|
if (err & ERR_MASK(RcvIBFlowErr))
|
|
strlcat(buf, "ribflow ", blen);
|
|
if (err & ERR_MASK(SendUnderRunErr))
|
|
strlcat(buf, "sunderrun ", blen);
|
|
if (err & ERR_MASK(SendPioArmLaunchErr))
|
|
strlcat(buf, "spioarmlaunch ", blen);
|
|
if (err & ERR_MASK(SendUnexpectedPktNumErr))
|
|
strlcat(buf, "sunexperrpktnum ", blen);
|
|
if (err & ERR_MASK(SendDroppedSmpPktErr))
|
|
strlcat(buf, "sdroppedsmppkt ", blen);
|
|
if (err & ERR_MASK(SendMaxPktLenErr))
|
|
strlcat(buf, "smaxpktlen ", blen);
|
|
if (err & ERR_MASK(SendUnsupportedVLErr))
|
|
strlcat(buf, "sunsupVL ", blen);
|
|
if (err & ERR_MASK(InvalidAddrErr))
|
|
strlcat(buf, "invalidaddr ", blen);
|
|
if (err & ERR_MASK(RcvEgrFullErr))
|
|
strlcat(buf, "rcvegrfull ", blen);
|
|
if (err & ERR_MASK(RcvHdrFullErr))
|
|
strlcat(buf, "rcvhdrfull ", blen);
|
|
if (err & ERR_MASK(IBStatusChanged))
|
|
strlcat(buf, "ibcstatuschg ", blen);
|
|
if (err & ERR_MASK(RcvIBLostLinkErr))
|
|
strlcat(buf, "riblostlink ", blen);
|
|
if (err & ERR_MASK(HardwareErr))
|
|
strlcat(buf, "hardware ", blen);
|
|
if (err & ERR_MASK(ResetNegated))
|
|
strlcat(buf, "reset ", blen);
|
|
done:
|
|
return iserr;
|
|
}
|
|
|
|
/*
|
|
* Called when we might have an error that is specific to a particular
|
|
* PIO buffer, and may need to cancel that buffer, so it can be re-used.
|
|
*/
|
|
static void qib_disarm_6120_senderrbufs(struct qib_pportdata *ppd)
|
|
{
|
|
unsigned long sbuf[2];
|
|
struct qib_devdata *dd = ppd->dd;
|
|
|
|
/*
|
|
* It's possible that sendbuffererror could have bits set; might
|
|
* have already done this as a result of hardware error handling.
|
|
*/
|
|
sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror);
|
|
sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1);
|
|
|
|
if (sbuf[0] || sbuf[1])
|
|
qib_disarm_piobufs_set(dd, sbuf,
|
|
dd->piobcnt2k + dd->piobcnt4k);
|
|
}
|
|
|
|
static int chk_6120_linkrecovery(struct qib_devdata *dd, u64 ibcs)
|
|
{
|
|
int ret = 1;
|
|
u32 ibstate = qib_6120_iblink_state(ibcs);
|
|
u32 linkrecov = read_6120_creg32(dd, cr_iblinkerrrecov);
|
|
|
|
if (linkrecov != dd->cspec->lastlinkrecov) {
|
|
/* and no more until active again */
|
|
dd->cspec->lastlinkrecov = 0;
|
|
qib_set_linkstate(dd->pport, QIB_IB_LINKDOWN);
|
|
ret = 0;
|
|
}
|
|
if (ibstate == IB_PORT_ACTIVE)
|
|
dd->cspec->lastlinkrecov =
|
|
read_6120_creg32(dd, cr_iblinkerrrecov);
|
|
return ret;
|
|
}
|
|
|
|
static void handle_6120_errors(struct qib_devdata *dd, u64 errs)
|
|
{
|
|
char *msg;
|
|
u64 ignore_this_time = 0;
|
|
u64 iserr = 0;
|
|
int log_idx;
|
|
struct qib_pportdata *ppd = dd->pport;
|
|
u64 mask;
|
|
|
|
/* don't report errors that are masked */
|
|
errs &= dd->cspec->errormask;
|
|
msg = dd->cspec->emsgbuf;
|
|
|
|
/* do these first, they are most important */
|
|
if (errs & ERR_MASK(HardwareErr))
|
|
qib_handle_6120_hwerrors(dd, msg, sizeof dd->cspec->emsgbuf);
|
|
else
|
|
for (log_idx = 0; log_idx < QIB_EEP_LOG_CNT; ++log_idx)
|
|
if (errs & dd->eep_st_masks[log_idx].errs_to_log)
|
|
qib_inc_eeprom_err(dd, log_idx, 1);
|
|
|
|
if (errs & ~IB_E_BITSEXTANT)
|
|
qib_dev_err(dd,
|
|
"error interrupt with unknown errors %llx set\n",
|
|
(unsigned long long) (errs & ~IB_E_BITSEXTANT));
|
|
|
|
if (errs & E_SUM_ERRS) {
|
|
qib_disarm_6120_senderrbufs(ppd);
|
|
if ((errs & E_SUM_LINK_PKTERRS) &&
|
|
!(ppd->lflags & QIBL_LINKACTIVE)) {
|
|
/*
|
|
* This can happen when trying to bring the link
|
|
* up, but the IB link changes state at the "wrong"
|
|
* time. The IB logic then complains that the packet
|
|
* isn't valid. We don't want to confuse people, so
|
|
* we just don't print them, except at debug
|
|
*/
|
|
ignore_this_time = errs & E_SUM_LINK_PKTERRS;
|
|
}
|
|
} else if ((errs & E_SUM_LINK_PKTERRS) &&
|
|
!(ppd->lflags & QIBL_LINKACTIVE)) {
|
|
/*
|
|
* This can happen when SMA is trying to bring the link
|
|
* up, but the IB link changes state at the "wrong" time.
|
|
* The IB logic then complains that the packet isn't
|
|
* valid. We don't want to confuse people, so we just
|
|
* don't print them, except at debug
|
|
*/
|
|
ignore_this_time = errs & E_SUM_LINK_PKTERRS;
|
|
}
|
|
|
|
qib_write_kreg(dd, kr_errclear, errs);
|
|
|
|
errs &= ~ignore_this_time;
|
|
if (!errs)
|
|
goto done;
|
|
|
|
/*
|
|
* The ones we mask off are handled specially below
|
|
* or above.
|
|
*/
|
|
mask = ERR_MASK(IBStatusChanged) | ERR_MASK(RcvEgrFullErr) |
|
|
ERR_MASK(RcvHdrFullErr) | ERR_MASK(HardwareErr);
|
|
qib_decode_6120_err(dd, msg, sizeof dd->cspec->emsgbuf, errs & ~mask);
|
|
|
|
if (errs & E_SUM_PKTERRS)
|
|
qib_stats.sps_rcverrs++;
|
|
if (errs & E_SUM_ERRS)
|
|
qib_stats.sps_txerrs++;
|
|
|
|
iserr = errs & ~(E_SUM_PKTERRS | QLOGIC_IB_E_PKTERRS);
|
|
|
|
if (errs & ERR_MASK(IBStatusChanged)) {
|
|
u64 ibcs = qib_read_kreg64(dd, kr_ibcstatus);
|
|
u32 ibstate = qib_6120_iblink_state(ibcs);
|
|
int handle = 1;
|
|
|
|
if (ibstate != IB_PORT_INIT && dd->cspec->lastlinkrecov)
|
|
handle = chk_6120_linkrecovery(dd, ibcs);
|
|
/*
|
|
* Since going into a recovery state causes the link state
|
|
* to go down and since recovery is transitory, it is better
|
|
* if we "miss" ever seeing the link training state go into
|
|
* recovery (i.e., ignore this transition for link state
|
|
* special handling purposes) without updating lastibcstat.
|
|
*/
|
|
if (handle && qib_6120_phys_portstate(ibcs) ==
|
|
IB_PHYSPORTSTATE_LINK_ERR_RECOVER)
|
|
handle = 0;
|
|
if (handle)
|
|
qib_handle_e_ibstatuschanged(ppd, ibcs);
|
|
}
|
|
|
|
if (errs & ERR_MASK(ResetNegated)) {
|
|
qib_dev_err(dd,
|
|
"Got reset, requires re-init (unload and reload driver)\n");
|
|
dd->flags &= ~QIB_INITTED; /* needs re-init */
|
|
/* mark as having had error */
|
|
*dd->devstatusp |= QIB_STATUS_HWERROR;
|
|
*dd->pport->statusp &= ~QIB_STATUS_IB_CONF;
|
|
}
|
|
|
|
if (*msg && iserr)
|
|
qib_dev_porterr(dd, ppd->port, "%s error\n", msg);
|
|
|
|
if (ppd->state_wanted & ppd->lflags)
|
|
wake_up_interruptible(&ppd->state_wait);
|
|
|
|
/*
|
|
* If there were hdrq or egrfull errors, wake up any processes
|
|
* waiting in poll. We used to try to check which contexts had
|
|
* the overflow, but given the cost of that and the chip reads
|
|
* to support it, it's better to just wake everybody up if we
|
|
* get an overflow; waiters can poll again if it's not them.
|
|
*/
|
|
if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) {
|
|
qib_handle_urcv(dd, ~0U);
|
|
if (errs & ERR_MASK(RcvEgrFullErr))
|
|
qib_stats.sps_buffull++;
|
|
else
|
|
qib_stats.sps_hdrfull++;
|
|
}
|
|
done:
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* qib_6120_init_hwerrors - enable hardware errors
|
|
* @dd: the qlogic_ib device
|
|
*
|
|
* now that we have finished initializing everything that might reasonably
|
|
* cause a hardware error, and cleared those errors bits as they occur,
|
|
* we can enable hardware errors in the mask (potentially enabling
|
|
* freeze mode), and enable hardware errors as errors (along with
|
|
* everything else) in errormask
|
|
*/
|
|
static void qib_6120_init_hwerrors(struct qib_devdata *dd)
|
|
{
|
|
u64 val;
|
|
u64 extsval;
|
|
|
|
extsval = qib_read_kreg64(dd, kr_extstatus);
|
|
|
|
if (!(extsval & QLOGIC_IB_EXTS_MEMBIST_ENDTEST))
|
|
qib_dev_err(dd, "MemBIST did not complete!\n");
|
|
|
|
/* init so all hwerrors interrupt, and enter freeze, ajdust below */
|
|
val = ~0ULL;
|
|
if (dd->minrev < 2) {
|
|
/*
|
|
* Avoid problem with internal interface bus parity
|
|
* checking. Fixed in Rev2.
|
|
*/
|
|
val &= ~QLOGIC_IB_HWE_PCIEBUSPARITYRADM;
|
|
}
|
|
/* avoid some intel cpu's speculative read freeze mode issue */
|
|
val &= ~TXEMEMPARITYERR_PIOBUF;
|
|
|
|
dd->cspec->hwerrmask = val;
|
|
|
|
qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed));
|
|
qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask);
|
|
|
|
/* clear all */
|
|
qib_write_kreg(dd, kr_errclear, ~0ULL);
|
|
/* enable errors that are masked, at least this first time. */
|
|
qib_write_kreg(dd, kr_errmask, ~0ULL);
|
|
dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask);
|
|
/* clear any interrupts up to this point (ints still not enabled) */
|
|
qib_write_kreg(dd, kr_intclear, ~0ULL);
|
|
|
|
qib_write_kreg(dd, kr_rcvbthqp,
|
|
dd->qpn_mask << (QIB_6120_RcvBTHQP_BTHQP_Mask_LSB - 1) |
|
|
QIB_KD_QP);
|
|
}
|
|
|
|
/*
|
|
* Disable and enable the armlaunch error. Used for PIO bandwidth testing
|
|
* on chips that are count-based, rather than trigger-based. There is no
|
|
* reference counting, but that's also fine, given the intended use.
|
|
* Only chip-specific because it's all register accesses
|
|
*/
|
|
static void qib_set_6120_armlaunch(struct qib_devdata *dd, u32 enable)
|
|
{
|
|
if (enable) {
|
|
qib_write_kreg(dd, kr_errclear,
|
|
ERR_MASK(SendPioArmLaunchErr));
|
|
dd->cspec->errormask |= ERR_MASK(SendPioArmLaunchErr);
|
|
} else
|
|
dd->cspec->errormask &= ~ERR_MASK(SendPioArmLaunchErr);
|
|
qib_write_kreg(dd, kr_errmask, dd->cspec->errormask);
|
|
}
|
|
|
|
/*
|
|
* Formerly took parameter <which> in pre-shifted,
|
|
* pre-merged form with LinkCmd and LinkInitCmd
|
|
* together, and assuming the zero was NOP.
|
|
*/
|
|
static void qib_set_ib_6120_lstate(struct qib_pportdata *ppd, u16 linkcmd,
|
|
u16 linitcmd)
|
|
{
|
|
u64 mod_wd;
|
|
struct qib_devdata *dd = ppd->dd;
|
|
unsigned long flags;
|
|
|
|
if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) {
|
|
/*
|
|
* If we are told to disable, note that so link-recovery
|
|
* code does not attempt to bring us back up.
|
|
*/
|
|
spin_lock_irqsave(&ppd->lflags_lock, flags);
|
|
ppd->lflags |= QIBL_IB_LINK_DISABLED;
|
|
spin_unlock_irqrestore(&ppd->lflags_lock, flags);
|
|
} else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) {
|
|
/*
|
|
* Any other linkinitcmd will lead to LINKDOWN and then
|
|
* to INIT (if all is well), so clear flag to let
|
|
* link-recovery code attempt to bring us back up.
|
|
*/
|
|
spin_lock_irqsave(&ppd->lflags_lock, flags);
|
|
ppd->lflags &= ~QIBL_IB_LINK_DISABLED;
|
|
spin_unlock_irqrestore(&ppd->lflags_lock, flags);
|
|
}
|
|
|
|
mod_wd = (linkcmd << QLOGIC_IB_IBCC_LINKCMD_SHIFT) |
|
|
(linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
|
|
|
|
qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl | mod_wd);
|
|
/* write to chip to prevent back-to-back writes of control reg */
|
|
qib_write_kreg(dd, kr_scratch, 0);
|
|
}
|
|
|
|
/**
|
|
* qib_6120_bringup_serdes - bring up the serdes
|
|
* @dd: the qlogic_ib device
|
|
*/
|
|
static int qib_6120_bringup_serdes(struct qib_pportdata *ppd)
|
|
{
|
|
struct qib_devdata *dd = ppd->dd;
|
|
u64 val, config1, prev_val, hwstat, ibc;
|
|
|
|
/* Put IBC in reset, sends disabled */
|
|
dd->control &= ~QLOGIC_IB_C_LINKENABLE;
|
|
qib_write_kreg(dd, kr_control, 0ULL);
|
|
|
|
dd->cspec->ibdeltainprog = 1;
|
|
dd->cspec->ibsymsnap = read_6120_creg32(dd, cr_ibsymbolerr);
|
|
dd->cspec->iblnkerrsnap = read_6120_creg32(dd, cr_iblinkerrrecov);
|
|
|
|
/* flowcontrolwatermark is in units of KBytes */
|
|
ibc = 0x5ULL << SYM_LSB(IBCCtrl, FlowCtrlWaterMark);
|
|
/*
|
|
* How often flowctrl sent. More or less in usecs; balance against
|
|
* watermark value, so that in theory senders always get a flow
|
|
* control update in time to not let the IB link go idle.
|
|
*/
|
|
ibc |= 0x3ULL << SYM_LSB(IBCCtrl, FlowCtrlPeriod);
|
|
/* max error tolerance */
|
|
dd->cspec->lli_thresh = 0xf;
|
|
ibc |= (u64) dd->cspec->lli_thresh << SYM_LSB(IBCCtrl, PhyerrThreshold);
|
|
/* use "real" buffer space for */
|
|
ibc |= 4ULL << SYM_LSB(IBCCtrl, CreditScale);
|
|
/* IB credit flow control. */
|
|
ibc |= 0xfULL << SYM_LSB(IBCCtrl, OverrunThreshold);
|
|
/*
|
|
* set initial max size pkt IBC will send, including ICRC; it's the
|
|
* PIO buffer size in dwords, less 1; also see qib_set_mtu()
|
|
*/
|
|
ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << SYM_LSB(IBCCtrl, MaxPktLen);
|
|
dd->cspec->ibcctrl = ibc; /* without linkcmd or linkinitcmd! */
|
|
|
|
/* initially come up waiting for TS1, without sending anything. */
|
|
val = dd->cspec->ibcctrl | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE <<
|
|
QLOGIC_IB_IBCC_LINKINITCMD_SHIFT);
|
|
qib_write_kreg(dd, kr_ibcctrl, val);
|
|
|
|
val = qib_read_kreg64(dd, kr_serdes_cfg0);
|
|
config1 = qib_read_kreg64(dd, kr_serdes_cfg1);
|
|
|
|
/*
|
|
* Force reset on, also set rxdetect enable. Must do before reading
|
|
* serdesstatus at least for simulation, or some of the bits in
|
|
* serdes status will come back as undefined and cause simulation
|
|
* failures
|
|
*/
|
|
val |= SYM_MASK(SerdesCfg0, ResetPLL) |
|
|
SYM_MASK(SerdesCfg0, RxDetEnX) |
|
|
(SYM_MASK(SerdesCfg0, L1PwrDnA) |
|
|
SYM_MASK(SerdesCfg0, L1PwrDnB) |
|
|
SYM_MASK(SerdesCfg0, L1PwrDnC) |
|
|
SYM_MASK(SerdesCfg0, L1PwrDnD));
|
|
qib_write_kreg(dd, kr_serdes_cfg0, val);
|
|
/* be sure chip saw it */
|
|
qib_read_kreg64(dd, kr_scratch);
|
|
udelay(5); /* need pll reset set at least for a bit */
|
|
/*
|
|
* after PLL is reset, set the per-lane Resets and TxIdle and
|
|
* clear the PLL reset and rxdetect (to get falling edge).
|
|
* Leave L1PWR bits set (permanently)
|
|
*/
|
|
val &= ~(SYM_MASK(SerdesCfg0, RxDetEnX) |
|
|
SYM_MASK(SerdesCfg0, ResetPLL) |
|
|
(SYM_MASK(SerdesCfg0, L1PwrDnA) |
|
|
SYM_MASK(SerdesCfg0, L1PwrDnB) |
|
|
SYM_MASK(SerdesCfg0, L1PwrDnC) |
|
|
SYM_MASK(SerdesCfg0, L1PwrDnD)));
|
|
val |= (SYM_MASK(SerdesCfg0, ResetA) |
|
|
SYM_MASK(SerdesCfg0, ResetB) |
|
|
SYM_MASK(SerdesCfg0, ResetC) |
|
|
SYM_MASK(SerdesCfg0, ResetD)) |
|
|
SYM_MASK(SerdesCfg0, TxIdeEnX);
|
|
qib_write_kreg(dd, kr_serdes_cfg0, val);
|
|
/* be sure chip saw it */
|
|
(void) qib_read_kreg64(dd, kr_scratch);
|
|
/* need PLL reset clear for at least 11 usec before lane
|
|
* resets cleared; give it a few more to be sure */
|
|
udelay(15);
|
|
val &= ~((SYM_MASK(SerdesCfg0, ResetA) |
|
|
SYM_MASK(SerdesCfg0, ResetB) |
|
|
SYM_MASK(SerdesCfg0, ResetC) |
|
|
SYM_MASK(SerdesCfg0, ResetD)) |
|
|
SYM_MASK(SerdesCfg0, TxIdeEnX));
|
|
|
|
qib_write_kreg(dd, kr_serdes_cfg0, val);
|
|
/* be sure chip saw it */
|
|
(void) qib_read_kreg64(dd, kr_scratch);
|
|
|
|
val = qib_read_kreg64(dd, kr_xgxs_cfg);
|
|
prev_val = val;
|
|
if (val & QLOGIC_IB_XGXS_RESET)
|
|
val &= ~QLOGIC_IB_XGXS_RESET;
|
|
if (SYM_FIELD(val, XGXSCfg, polarity_inv) != ppd->rx_pol_inv) {
|
|
/* need to compensate for Tx inversion in partner */
|
|
val &= ~SYM_MASK(XGXSCfg, polarity_inv);
|
|
val |= (u64)ppd->rx_pol_inv << SYM_LSB(XGXSCfg, polarity_inv);
|
|
}
|
|
if (val != prev_val)
|
|
qib_write_kreg(dd, kr_xgxs_cfg, val);
|
|
|
|
val = qib_read_kreg64(dd, kr_serdes_cfg0);
|
|
|
|
/* clear current and de-emphasis bits */
|
|
config1 &= ~0x0ffffffff00ULL;
|
|
/* set current to 20ma */
|
|
config1 |= 0x00000000000ULL;
|
|
/* set de-emphasis to -5.68dB */
|
|
config1 |= 0x0cccc000000ULL;
|
|
qib_write_kreg(dd, kr_serdes_cfg1, config1);
|
|
|
|
/* base and port guid same for single port */
|
|
ppd->guid = dd->base_guid;
|
|
|
|
/*
|
|
* the process of setting and un-resetting the serdes normally
|
|
* causes a serdes PLL error, so check for that and clear it
|
|
* here. Also clearr hwerr bit in errstatus, but not others.
|
|
*/
|
|
hwstat = qib_read_kreg64(dd, kr_hwerrstatus);
|
|
if (hwstat) {
|
|
/* should just have PLL, clear all set, in an case */
|
|
qib_write_kreg(dd, kr_hwerrclear, hwstat);
|
|
qib_write_kreg(dd, kr_errclear, ERR_MASK(HardwareErr));
|
|
}
|
|
|
|
dd->control |= QLOGIC_IB_C_LINKENABLE;
|
|
dd->control &= ~QLOGIC_IB_C_FREEZEMODE;
|
|
qib_write_kreg(dd, kr_control, dd->control);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* qib_6120_quiet_serdes - set serdes to txidle
|
|
* @ppd: physical port of the qlogic_ib device
|
|
* Called when driver is being unloaded
|
|
*/
|
|
static void qib_6120_quiet_serdes(struct qib_pportdata *ppd)
|
|
{
|
|
struct qib_devdata *dd = ppd->dd;
|
|
u64 val;
|
|
|
|
qib_set_ib_6120_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE);
|
|
|
|
/* disable IBC */
|
|
dd->control &= ~QLOGIC_IB_C_LINKENABLE;
|
|
qib_write_kreg(dd, kr_control,
|
|
dd->control | QLOGIC_IB_C_FREEZEMODE);
|
|
|
|
if (dd->cspec->ibsymdelta || dd->cspec->iblnkerrdelta ||
|
|
dd->cspec->ibdeltainprog) {
|
|
u64 diagc;
|
|
|
|
/* enable counter writes */
|
|
diagc = qib_read_kreg64(dd, kr_hwdiagctrl);
|
|
qib_write_kreg(dd, kr_hwdiagctrl,
|
|
diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable));
|
|
|
|
if (dd->cspec->ibsymdelta || dd->cspec->ibdeltainprog) {
|
|
val = read_6120_creg32(dd, cr_ibsymbolerr);
|
|
if (dd->cspec->ibdeltainprog)
|
|
val -= val - dd->cspec->ibsymsnap;
|
|
val -= dd->cspec->ibsymdelta;
|
|
write_6120_creg(dd, cr_ibsymbolerr, val);
|
|
}
|
|
if (dd->cspec->iblnkerrdelta || dd->cspec->ibdeltainprog) {
|
|
val = read_6120_creg32(dd, cr_iblinkerrrecov);
|
|
if (dd->cspec->ibdeltainprog)
|
|
val -= val - dd->cspec->iblnkerrsnap;
|
|
val -= dd->cspec->iblnkerrdelta;
|
|
write_6120_creg(dd, cr_iblinkerrrecov, val);
|
|
}
|
|
|
|
/* and disable counter writes */
|
|
qib_write_kreg(dd, kr_hwdiagctrl, diagc);
|
|
}
|
|
|
|
val = qib_read_kreg64(dd, kr_serdes_cfg0);
|
|
val |= SYM_MASK(SerdesCfg0, TxIdeEnX);
|
|
qib_write_kreg(dd, kr_serdes_cfg0, val);
|
|
}
|
|
|
|
/**
|
|
* qib_6120_setup_setextled - set the state of the two external LEDs
|
|
* @dd: the qlogic_ib device
|
|
* @on: whether the link is up or not
|
|
*
|
|
* The exact combo of LEDs if on is true is determined by looking
|
|
* at the ibcstatus.
|
|
|
|
* These LEDs indicate the physical and logical state of IB link.
|
|
* For this chip (at least with recommended board pinouts), LED1
|
|
* is Yellow (logical state) and LED2 is Green (physical state),
|
|
*
|
|
* Note: We try to match the Mellanox HCA LED behavior as best
|
|
* we can. Green indicates physical link state is OK (something is
|
|
* plugged in, and we can train).
|
|
* Amber indicates the link is logically up (ACTIVE).
|
|
* Mellanox further blinks the amber LED to indicate data packet
|
|
* activity, but we have no hardware support for that, so it would
|
|
* require waking up every 10-20 msecs and checking the counters
|
|
* on the chip, and then turning the LED off if appropriate. That's
|
|
* visible overhead, so not something we will do.
|
|
*
|
|
*/
|
|
static void qib_6120_setup_setextled(struct qib_pportdata *ppd, u32 on)
|
|
{
|
|
u64 extctl, val, lst, ltst;
|
|
unsigned long flags;
|
|
struct qib_devdata *dd = ppd->dd;
|
|
|
|
/*
|
|
* The diags use the LED to indicate diag info, so we leave
|
|
* the external LED alone when the diags are running.
|
|
*/
|
|
if (dd->diag_client)
|
|
return;
|
|
|
|
/* Allow override of LED display for, e.g. Locating system in rack */
|
|
if (ppd->led_override) {
|
|
ltst = (ppd->led_override & QIB_LED_PHYS) ?
|
|
IB_PHYSPORTSTATE_LINKUP : IB_PHYSPORTSTATE_DISABLED,
|
|
lst = (ppd->led_override & QIB_LED_LOG) ?
|
|
IB_PORT_ACTIVE : IB_PORT_DOWN;
|
|
} else if (on) {
|
|
val = qib_read_kreg64(dd, kr_ibcstatus);
|
|
ltst = qib_6120_phys_portstate(val);
|
|
lst = qib_6120_iblink_state(val);
|
|
} else {
|
|
ltst = 0;
|
|
lst = 0;
|
|
}
|
|
|
|
spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
|
|
extctl = dd->cspec->extctrl & ~(SYM_MASK(EXTCtrl, LEDPriPortGreenOn) |
|
|
SYM_MASK(EXTCtrl, LEDPriPortYellowOn));
|
|
|
|
if (ltst == IB_PHYSPORTSTATE_LINKUP)
|
|
extctl |= SYM_MASK(EXTCtrl, LEDPriPortYellowOn);
|
|
if (lst == IB_PORT_ACTIVE)
|
|
extctl |= SYM_MASK(EXTCtrl, LEDPriPortGreenOn);
|
|
dd->cspec->extctrl = extctl;
|
|
qib_write_kreg(dd, kr_extctrl, extctl);
|
|
spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
|
|
}
|
|
|
|
static void qib_6120_free_irq(struct qib_devdata *dd)
|
|
{
|
|
if (dd->cspec->irq) {
|
|
free_irq(dd->cspec->irq, dd);
|
|
dd->cspec->irq = 0;
|
|
}
|
|
qib_nomsi(dd);
|
|
}
|
|
|
|
/**
|
|
* qib_6120_setup_cleanup - clean up any per-chip chip-specific stuff
|
|
* @dd: the qlogic_ib device
|
|
*
|
|
* This is called during driver unload.
|
|
*/
|
|
static void qib_6120_setup_cleanup(struct qib_devdata *dd)
|
|
{
|
|
qib_6120_free_irq(dd);
|
|
kfree(dd->cspec->cntrs);
|
|
kfree(dd->cspec->portcntrs);
|
|
if (dd->cspec->dummy_hdrq) {
|
|
dma_free_coherent(&dd->pcidev->dev,
|
|
ALIGN(dd->rcvhdrcnt *
|
|
dd->rcvhdrentsize *
|
|
sizeof(u32), PAGE_SIZE),
|
|
dd->cspec->dummy_hdrq,
|
|
dd->cspec->dummy_hdrq_phys);
|
|
dd->cspec->dummy_hdrq = NULL;
|
|
}
|
|
}
|
|
|
|
static void qib_wantpiobuf_6120_intr(struct qib_devdata *dd, u32 needint)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dd->sendctrl_lock, flags);
|
|
if (needint)
|
|
dd->sendctrl |= SYM_MASK(SendCtrl, PIOIntBufAvail);
|
|
else
|
|
dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOIntBufAvail);
|
|
qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
|
|
qib_write_kreg(dd, kr_scratch, 0ULL);
|
|
spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* handle errors and unusual events first, separate function
|
|
* to improve cache hits for fast path interrupt handling
|
|
*/
|
|
static noinline void unlikely_6120_intr(struct qib_devdata *dd, u64 istat)
|
|
{
|
|
if (unlikely(istat & ~QLOGIC_IB_I_BITSEXTANT))
|
|
qib_dev_err(dd, "interrupt with unknown interrupts %Lx set\n",
|
|
istat & ~QLOGIC_IB_I_BITSEXTANT);
|
|
|
|
if (istat & QLOGIC_IB_I_ERROR) {
|
|
u64 estat = 0;
|
|
|
|
qib_stats.sps_errints++;
|
|
estat = qib_read_kreg64(dd, kr_errstatus);
|
|
if (!estat)
|
|
qib_devinfo(dd->pcidev,
|
|
"error interrupt (%Lx), but no error bits set!\n",
|
|
istat);
|
|
handle_6120_errors(dd, estat);
|
|
}
|
|
|
|
if (istat & QLOGIC_IB_I_GPIO) {
|
|
u32 gpiostatus;
|
|
u32 to_clear = 0;
|
|
|
|
/*
|
|
* GPIO_3..5 on IBA6120 Rev2 chips indicate
|
|
* errors that we need to count.
|
|
*/
|
|
gpiostatus = qib_read_kreg32(dd, kr_gpio_status);
|
|
/* First the error-counter case. */
|
|
if (gpiostatus & GPIO_ERRINTR_MASK) {
|
|
/* want to clear the bits we see asserted. */
|
|
to_clear |= (gpiostatus & GPIO_ERRINTR_MASK);
|
|
|
|
/*
|
|
* Count appropriately, clear bits out of our copy,
|
|
* as they have been "handled".
|
|
*/
|
|
if (gpiostatus & (1 << GPIO_RXUVL_BIT))
|
|
dd->cspec->rxfc_unsupvl_errs++;
|
|
if (gpiostatus & (1 << GPIO_OVRUN_BIT))
|
|
dd->cspec->overrun_thresh_errs++;
|
|
if (gpiostatus & (1 << GPIO_LLI_BIT))
|
|
dd->cspec->lli_errs++;
|
|
gpiostatus &= ~GPIO_ERRINTR_MASK;
|
|
}
|
|
if (gpiostatus) {
|
|
/*
|
|
* Some unexpected bits remain. If they could have
|
|
* caused the interrupt, complain and clear.
|
|
* To avoid repetition of this condition, also clear
|
|
* the mask. It is almost certainly due to error.
|
|
*/
|
|
const u32 mask = qib_read_kreg32(dd, kr_gpio_mask);
|
|
|
|
/*
|
|
* Also check that the chip reflects our shadow,
|
|
* and report issues, If they caused the interrupt.
|
|
* we will suppress by refreshing from the shadow.
|
|
*/
|
|
if (mask & gpiostatus) {
|
|
to_clear |= (gpiostatus & mask);
|
|
dd->cspec->gpio_mask &= ~(gpiostatus & mask);
|
|
qib_write_kreg(dd, kr_gpio_mask,
|
|
dd->cspec->gpio_mask);
|
|
}
|
|
}
|
|
if (to_clear)
|
|
qib_write_kreg(dd, kr_gpio_clear, (u64) to_clear);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t qib_6120intr(int irq, void *data)
|
|
{
|
|
struct qib_devdata *dd = data;
|
|
irqreturn_t ret;
|
|
u32 istat, ctxtrbits, rmask, crcs = 0;
|
|
unsigned i;
|
|
|
|
if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) {
|
|
/*
|
|
* This return value is not great, but we do not want the
|
|
* interrupt core code to remove our interrupt handler
|
|
* because we don't appear to be handling an interrupt
|
|
* during a chip reset.
|
|
*/
|
|
ret = IRQ_HANDLED;
|
|
goto bail;
|
|
}
|
|
|
|
istat = qib_read_kreg32(dd, kr_intstatus);
|
|
|
|
if (unlikely(!istat)) {
|
|
ret = IRQ_NONE; /* not our interrupt, or already handled */
|
|
goto bail;
|
|
}
|
|
if (unlikely(istat == -1)) {
|
|
qib_bad_intrstatus(dd);
|
|
/* don't know if it was our interrupt or not */
|
|
ret = IRQ_NONE;
|
|
goto bail;
|
|
}
|
|
|
|
this_cpu_inc(*dd->int_counter);
|
|
|
|
if (unlikely(istat & (~QLOGIC_IB_I_BITSEXTANT |
|
|
QLOGIC_IB_I_GPIO | QLOGIC_IB_I_ERROR)))
|
|
unlikely_6120_intr(dd, istat);
|
|
|
|
/*
|
|
* Clear the interrupt bits we found set, relatively early, so we
|
|
* "know" know the chip will have seen this by the time we process
|
|
* the queue, and will re-interrupt if necessary. The processor
|
|
* itself won't take the interrupt again until we return.
|
|
*/
|
|
qib_write_kreg(dd, kr_intclear, istat);
|
|
|
|
/*
|
|
* Handle kernel receive queues before checking for pio buffers
|
|
* available since receives can overflow; piobuf waiters can afford
|
|
* a few extra cycles, since they were waiting anyway.
|
|
*/
|
|
ctxtrbits = istat &
|
|
((QLOGIC_IB_I_RCVAVAIL_MASK << QLOGIC_IB_I_RCVAVAIL_SHIFT) |
|
|
(QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT));
|
|
if (ctxtrbits) {
|
|
rmask = (1U << QLOGIC_IB_I_RCVAVAIL_SHIFT) |
|
|
(1U << QLOGIC_IB_I_RCVURG_SHIFT);
|
|
for (i = 0; i < dd->first_user_ctxt; i++) {
|
|
if (ctxtrbits & rmask) {
|
|
ctxtrbits &= ~rmask;
|
|
crcs += qib_kreceive(dd->rcd[i],
|
|
&dd->cspec->lli_counter,
|
|
NULL);
|
|
}
|
|
rmask <<= 1;
|
|
}
|
|
if (crcs) {
|
|
u32 cntr = dd->cspec->lli_counter;
|
|
cntr += crcs;
|
|
if (cntr) {
|
|
if (cntr > dd->cspec->lli_thresh) {
|
|
dd->cspec->lli_counter = 0;
|
|
dd->cspec->lli_errs++;
|
|
} else
|
|
dd->cspec->lli_counter += cntr;
|
|
}
|
|
}
|
|
|
|
|
|
if (ctxtrbits) {
|
|
ctxtrbits =
|
|
(ctxtrbits >> QLOGIC_IB_I_RCVAVAIL_SHIFT) |
|
|
(ctxtrbits >> QLOGIC_IB_I_RCVURG_SHIFT);
|
|
qib_handle_urcv(dd, ctxtrbits);
|
|
}
|
|
}
|
|
|
|
if ((istat & QLOGIC_IB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED))
|
|
qib_ib_piobufavail(dd);
|
|
|
|
ret = IRQ_HANDLED;
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Set up our chip-specific interrupt handler
|
|
* The interrupt type has already been setup, so
|
|
* we just need to do the registration and error checking.
|
|
*/
|
|
static void qib_setup_6120_interrupt(struct qib_devdata *dd)
|
|
{
|
|
/*
|
|
* If the chip supports added error indication via GPIO pins,
|
|
* enable interrupts on those bits so the interrupt routine
|
|
* can count the events. Also set flag so interrupt routine
|
|
* can know they are expected.
|
|
*/
|
|
if (SYM_FIELD(dd->revision, Revision_R,
|
|
ChipRevMinor) > 1) {
|
|
/* Rev2+ reports extra errors via internal GPIO pins */
|
|
dd->cspec->gpio_mask |= GPIO_ERRINTR_MASK;
|
|
qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
|
|
}
|
|
|
|
if (!dd->cspec->irq)
|
|
qib_dev_err(dd,
|
|
"irq is 0, BIOS error? Interrupts won't work\n");
|
|
else {
|
|
int ret;
|
|
ret = request_irq(dd->cspec->irq, qib_6120intr, 0,
|
|
QIB_DRV_NAME, dd);
|
|
if (ret)
|
|
qib_dev_err(dd,
|
|
"Couldn't setup interrupt (irq=%d): %d\n",
|
|
dd->cspec->irq, ret);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* pe_boardname - fill in the board name
|
|
* @dd: the qlogic_ib device
|
|
*
|
|
* info is based on the board revision register
|
|
*/
|
|
static void pe_boardname(struct qib_devdata *dd)
|
|
{
|
|
char *n;
|
|
u32 boardid, namelen;
|
|
|
|
boardid = SYM_FIELD(dd->revision, Revision,
|
|
BoardID);
|
|
|
|
switch (boardid) {
|
|
case 2:
|
|
n = "InfiniPath_QLE7140";
|
|
break;
|
|
default:
|
|
qib_dev_err(dd, "Unknown 6120 board with ID %u\n", boardid);
|
|
n = "Unknown_InfiniPath_6120";
|
|
break;
|
|
}
|
|
namelen = strlen(n) + 1;
|
|
dd->boardname = kmalloc(namelen, GFP_KERNEL);
|
|
if (!dd->boardname)
|
|
qib_dev_err(dd, "Failed allocation for board name: %s\n", n);
|
|
else
|
|
snprintf(dd->boardname, namelen, "%s", n);
|
|
|
|
if (dd->majrev != 4 || !dd->minrev || dd->minrev > 2)
|
|
qib_dev_err(dd,
|
|
"Unsupported InfiniPath hardware revision %u.%u!\n",
|
|
dd->majrev, dd->minrev);
|
|
|
|
snprintf(dd->boardversion, sizeof(dd->boardversion),
|
|
"ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n",
|
|
QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname,
|
|
(unsigned)SYM_FIELD(dd->revision, Revision_R, Arch),
|
|
dd->majrev, dd->minrev,
|
|
(unsigned)SYM_FIELD(dd->revision, Revision_R, SW));
|
|
|
|
}
|
|
|
|
/*
|
|
* This routine sleeps, so it can only be called from user context, not
|
|
* from interrupt context. If we need interrupt context, we can split
|
|
* it into two routines.
|
|
*/
|
|
static int qib_6120_setup_reset(struct qib_devdata *dd)
|
|
{
|
|
u64 val;
|
|
int i;
|
|
int ret;
|
|
u16 cmdval;
|
|
u8 int_line, clinesz;
|
|
|
|
qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz);
|
|
|
|
/* Use ERROR so it shows up in logs, etc. */
|
|
qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit);
|
|
|
|
/* no interrupts till re-initted */
|
|
qib_6120_set_intr_state(dd, 0);
|
|
|
|
dd->cspec->ibdeltainprog = 0;
|
|
dd->cspec->ibsymdelta = 0;
|
|
dd->cspec->iblnkerrdelta = 0;
|
|
|
|
/*
|
|
* Keep chip from being accessed until we are ready. Use
|
|
* writeq() directly, to allow the write even though QIB_PRESENT
|
|
* isn't set.
|
|
*/
|
|
dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
|
|
/* so we check interrupts work again */
|
|
dd->z_int_counter = qib_int_counter(dd);
|
|
val = dd->control | QLOGIC_IB_C_RESET;
|
|
writeq(val, &dd->kregbase[kr_control]);
|
|
mb(); /* prevent compiler re-ordering around actual reset */
|
|
|
|
for (i = 1; i <= 5; i++) {
|
|
/*
|
|
* Allow MBIST, etc. to complete; longer on each retry.
|
|
* We sometimes get machine checks from bus timeout if no
|
|
* response, so for now, make it *really* long.
|
|
*/
|
|
msleep(1000 + (1 + i) * 2000);
|
|
|
|
qib_pcie_reenable(dd, cmdval, int_line, clinesz);
|
|
|
|
/*
|
|
* Use readq directly, so we don't need to mark it as PRESENT
|
|
* until we get a successful indication that all is well.
|
|
*/
|
|
val = readq(&dd->kregbase[kr_revision]);
|
|
if (val == dd->revision) {
|
|
dd->flags |= QIB_PRESENT; /* it's back */
|
|
ret = qib_reinit_intr(dd);
|
|
goto bail;
|
|
}
|
|
}
|
|
ret = 0; /* failed */
|
|
|
|
bail:
|
|
if (ret) {
|
|
if (qib_pcie_params(dd, dd->lbus_width, NULL, NULL))
|
|
qib_dev_err(dd,
|
|
"Reset failed to setup PCIe or interrupts; continuing anyway\n");
|
|
/* clear the reset error, init error/hwerror mask */
|
|
qib_6120_init_hwerrors(dd);
|
|
/* for Rev2 error interrupts; nop for rev 1 */
|
|
qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
|
|
/* clear the reset error, init error/hwerror mask */
|
|
qib_6120_init_hwerrors(dd);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* qib_6120_put_tid - write a TID in chip
|
|
* @dd: the qlogic_ib device
|
|
* @tidptr: pointer to the expected TID (in chip) to update
|
|
* @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0)
|
|
* for expected
|
|
* @pa: physical address of in memory buffer; tidinvalid if freeing
|
|
*
|
|
* This exists as a separate routine to allow for special locking etc.
|
|
* It's used for both the full cleanup on exit, as well as the normal
|
|
* setup and teardown.
|
|
*/
|
|
static void qib_6120_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr,
|
|
u32 type, unsigned long pa)
|
|
{
|
|
u32 __iomem *tidp32 = (u32 __iomem *)tidptr;
|
|
unsigned long flags;
|
|
int tidx;
|
|
spinlock_t *tidlockp; /* select appropriate spinlock */
|
|
|
|
if (!dd->kregbase)
|
|
return;
|
|
|
|
if (pa != dd->tidinvalid) {
|
|
if (pa & ((1U << 11) - 1)) {
|
|
qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n",
|
|
pa);
|
|
return;
|
|
}
|
|
pa >>= 11;
|
|
if (pa & ~QLOGIC_IB_RT_ADDR_MASK) {
|
|
qib_dev_err(dd,
|
|
"Physical page address 0x%lx larger than supported\n",
|
|
pa);
|
|
return;
|
|
}
|
|
|
|
if (type == RCVHQ_RCV_TYPE_EAGER)
|
|
pa |= dd->tidtemplate;
|
|
else /* for now, always full 4KB page */
|
|
pa |= 2 << 29;
|
|
}
|
|
|
|
/*
|
|
* Avoid chip issue by writing the scratch register
|
|
* before and after the TID, and with an io write barrier.
|
|
* We use a spinlock around the writes, so they can't intermix
|
|
* with other TID (eager or expected) writes (the chip problem
|
|
* is triggered by back to back TID writes). Unfortunately, this
|
|
* call can be done from interrupt level for the ctxt 0 eager TIDs,
|
|
* so we have to use irqsave locks.
|
|
*/
|
|
/*
|
|
* Assumes tidptr always > egrtidbase
|
|
* if type == RCVHQ_RCV_TYPE_EAGER.
|
|
*/
|
|
tidx = tidptr - dd->egrtidbase;
|
|
|
|
tidlockp = (type == RCVHQ_RCV_TYPE_EAGER && tidx < dd->rcvhdrcnt)
|
|
? &dd->cspec->kernel_tid_lock : &dd->cspec->user_tid_lock;
|
|
spin_lock_irqsave(tidlockp, flags);
|
|
qib_write_kreg(dd, kr_scratch, 0xfeeddeaf);
|
|
writel(pa, tidp32);
|
|
qib_write_kreg(dd, kr_scratch, 0xdeadbeef);
|
|
mmiowb();
|
|
spin_unlock_irqrestore(tidlockp, flags);
|
|
}
|
|
|
|
/**
|
|
* qib_6120_put_tid_2 - write a TID in chip, Revision 2 or higher
|
|
* @dd: the qlogic_ib device
|
|
* @tidptr: pointer to the expected TID (in chip) to update
|
|
* @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0)
|
|
* for expected
|
|
* @pa: physical address of in memory buffer; tidinvalid if freeing
|
|
*
|
|
* This exists as a separate routine to allow for selection of the
|
|
* appropriate "flavor". The static calls in cleanup just use the
|
|
* revision-agnostic form, as they are not performance critical.
|
|
*/
|
|
static void qib_6120_put_tid_2(struct qib_devdata *dd, u64 __iomem *tidptr,
|
|
u32 type, unsigned long pa)
|
|
{
|
|
u32 __iomem *tidp32 = (u32 __iomem *)tidptr;
|
|
u32 tidx;
|
|
|
|
if (!dd->kregbase)
|
|
return;
|
|
|
|
if (pa != dd->tidinvalid) {
|
|
if (pa & ((1U << 11) - 1)) {
|
|
qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n",
|
|
pa);
|
|
return;
|
|
}
|
|
pa >>= 11;
|
|
if (pa & ~QLOGIC_IB_RT_ADDR_MASK) {
|
|
qib_dev_err(dd,
|
|
"Physical page address 0x%lx larger than supported\n",
|
|
pa);
|
|
return;
|
|
}
|
|
|
|
if (type == RCVHQ_RCV_TYPE_EAGER)
|
|
pa |= dd->tidtemplate;
|
|
else /* for now, always full 4KB page */
|
|
pa |= 2 << 29;
|
|
}
|
|
tidx = tidptr - dd->egrtidbase;
|
|
writel(pa, tidp32);
|
|
mmiowb();
|
|
}
|
|
|
|
|
|
/**
|
|
* qib_6120_clear_tids - clear all TID entries for a context, expected and eager
|
|
* @dd: the qlogic_ib device
|
|
* @ctxt: the context
|
|
*
|
|
* clear all TID entries for a context, expected and eager.
|
|
* Used from qib_close(). On this chip, TIDs are only 32 bits,
|
|
* not 64, but they are still on 64 bit boundaries, so tidbase
|
|
* is declared as u64 * for the pointer math, even though we write 32 bits
|
|
*/
|
|
static void qib_6120_clear_tids(struct qib_devdata *dd,
|
|
struct qib_ctxtdata *rcd)
|
|
{
|
|
u64 __iomem *tidbase;
|
|
unsigned long tidinv;
|
|
u32 ctxt;
|
|
int i;
|
|
|
|
if (!dd->kregbase || !rcd)
|
|
return;
|
|
|
|
ctxt = rcd->ctxt;
|
|
|
|
tidinv = dd->tidinvalid;
|
|
tidbase = (u64 __iomem *)
|
|
((char __iomem *)(dd->kregbase) +
|
|
dd->rcvtidbase +
|
|
ctxt * dd->rcvtidcnt * sizeof(*tidbase));
|
|
|
|
for (i = 0; i < dd->rcvtidcnt; i++)
|
|
/* use func pointer because could be one of two funcs */
|
|
dd->f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED,
|
|
tidinv);
|
|
|
|
tidbase = (u64 __iomem *)
|
|
((char __iomem *)(dd->kregbase) +
|
|
dd->rcvegrbase +
|
|
rcd->rcvegr_tid_base * sizeof(*tidbase));
|
|
|
|
for (i = 0; i < rcd->rcvegrcnt; i++)
|
|
/* use func pointer because could be one of two funcs */
|
|
dd->f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER,
|
|
tidinv);
|
|
}
|
|
|
|
/**
|
|
* qib_6120_tidtemplate - setup constants for TID updates
|
|
* @dd: the qlogic_ib device
|
|
*
|
|
* We setup stuff that we use a lot, to avoid calculating each time
|
|
*/
|
|
static void qib_6120_tidtemplate(struct qib_devdata *dd)
|
|
{
|
|
u32 egrsize = dd->rcvegrbufsize;
|
|
|
|
/*
|
|
* For now, we always allocate 4KB buffers (at init) so we can
|
|
* receive max size packets. We may want a module parameter to
|
|
* specify 2KB or 4KB and/or make be per ctxt instead of per device
|
|
* for those who want to reduce memory footprint. Note that the
|
|
* rcvhdrentsize size must be large enough to hold the largest
|
|
* IB header (currently 96 bytes) that we expect to handle (plus of
|
|
* course the 2 dwords of RHF).
|
|
*/
|
|
if (egrsize == 2048)
|
|
dd->tidtemplate = 1U << 29;
|
|
else if (egrsize == 4096)
|
|
dd->tidtemplate = 2U << 29;
|
|
dd->tidinvalid = 0;
|
|
}
|
|
|
|
int __attribute__((weak)) qib_unordered_wc(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* qib_6120_get_base_info - set chip-specific flags for user code
|
|
* @rcd: the qlogic_ib ctxt
|
|
* @kbase: qib_base_info pointer
|
|
*
|
|
* We set the PCIE flag because the lower bandwidth on PCIe vs
|
|
* HyperTransport can affect some user packet algorithms.
|
|
*/
|
|
static int qib_6120_get_base_info(struct qib_ctxtdata *rcd,
|
|
struct qib_base_info *kinfo)
|
|
{
|
|
if (qib_unordered_wc())
|
|
kinfo->spi_runtime_flags |= QIB_RUNTIME_FORCE_WC_ORDER;
|
|
|
|
kinfo->spi_runtime_flags |= QIB_RUNTIME_PCIE |
|
|
QIB_RUNTIME_FORCE_PIOAVAIL | QIB_RUNTIME_PIO_REGSWAPPED;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct qib_message_header *
|
|
qib_6120_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr)
|
|
{
|
|
return (struct qib_message_header *)
|
|
&rhf_addr[sizeof(u64) / sizeof(u32)];
|
|
}
|
|
|
|
static void qib_6120_config_ctxts(struct qib_devdata *dd)
|
|
{
|
|
dd->ctxtcnt = qib_read_kreg32(dd, kr_portcnt);
|
|
if (qib_n_krcv_queues > 1) {
|
|
dd->first_user_ctxt = qib_n_krcv_queues * dd->num_pports;
|
|
if (dd->first_user_ctxt > dd->ctxtcnt)
|
|
dd->first_user_ctxt = dd->ctxtcnt;
|
|
dd->qpn_mask = dd->first_user_ctxt <= 2 ? 2 : 6;
|
|
} else
|
|
dd->first_user_ctxt = dd->num_pports;
|
|
dd->n_krcv_queues = dd->first_user_ctxt;
|
|
}
|
|
|
|
static void qib_update_6120_usrhead(struct qib_ctxtdata *rcd, u64 hd,
|
|
u32 updegr, u32 egrhd, u32 npkts)
|
|
{
|
|
if (updegr)
|
|
qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt);
|
|
mmiowb();
|
|
qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt);
|
|
mmiowb();
|
|
}
|
|
|
|
static u32 qib_6120_hdrqempty(struct qib_ctxtdata *rcd)
|
|
{
|
|
u32 head, tail;
|
|
|
|
head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt);
|
|
if (rcd->rcvhdrtail_kvaddr)
|
|
tail = qib_get_rcvhdrtail(rcd);
|
|
else
|
|
tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt);
|
|
return head == tail;
|
|
}
|
|
|
|
/*
|
|
* Used when we close any ctxt, for DMA already in flight
|
|
* at close. Can't be done until we know hdrq size, so not
|
|
* early in chip init.
|
|
*/
|
|
static void alloc_dummy_hdrq(struct qib_devdata *dd)
|
|
{
|
|
dd->cspec->dummy_hdrq = dma_alloc_coherent(&dd->pcidev->dev,
|
|
dd->rcd[0]->rcvhdrq_size,
|
|
&dd->cspec->dummy_hdrq_phys,
|
|
GFP_ATOMIC | __GFP_COMP);
|
|
if (!dd->cspec->dummy_hdrq) {
|
|
qib_devinfo(dd->pcidev, "Couldn't allocate dummy hdrq\n");
|
|
/* fallback to just 0'ing */
|
|
dd->cspec->dummy_hdrq_phys = 0UL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Modify the RCVCTRL register in chip-specific way. This
|
|
* is a function because bit positions and (future) register
|
|
* location is chip-specific, but the needed operations are
|
|
* generic. <op> is a bit-mask because we often want to
|
|
* do multiple modifications.
|
|
*/
|
|
static void rcvctrl_6120_mod(struct qib_pportdata *ppd, unsigned int op,
|
|
int ctxt)
|
|
{
|
|
struct qib_devdata *dd = ppd->dd;
|
|
u64 mask, val;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags);
|
|
|
|
if (op & QIB_RCVCTRL_TAILUPD_ENB)
|
|
dd->rcvctrl |= (1ULL << QLOGIC_IB_R_TAILUPD_SHIFT);
|
|
if (op & QIB_RCVCTRL_TAILUPD_DIS)
|
|
dd->rcvctrl &= ~(1ULL << QLOGIC_IB_R_TAILUPD_SHIFT);
|
|
if (op & QIB_RCVCTRL_PKEY_ENB)
|
|
dd->rcvctrl &= ~(1ULL << IBA6120_R_PKEY_DIS_SHIFT);
|
|
if (op & QIB_RCVCTRL_PKEY_DIS)
|
|
dd->rcvctrl |= (1ULL << IBA6120_R_PKEY_DIS_SHIFT);
|
|
if (ctxt < 0)
|
|
mask = (1ULL << dd->ctxtcnt) - 1;
|
|
else
|
|
mask = (1ULL << ctxt);
|
|
if (op & QIB_RCVCTRL_CTXT_ENB) {
|
|
/* always done for specific ctxt */
|
|
dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, PortEnable));
|
|
if (!(dd->flags & QIB_NODMA_RTAIL))
|
|
dd->rcvctrl |= 1ULL << QLOGIC_IB_R_TAILUPD_SHIFT;
|
|
/* Write these registers before the context is enabled. */
|
|
qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt,
|
|
dd->rcd[ctxt]->rcvhdrqtailaddr_phys);
|
|
qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt,
|
|
dd->rcd[ctxt]->rcvhdrq_phys);
|
|
|
|
if (ctxt == 0 && !dd->cspec->dummy_hdrq)
|
|
alloc_dummy_hdrq(dd);
|
|
}
|
|
if (op & QIB_RCVCTRL_CTXT_DIS)
|
|
dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, PortEnable));
|
|
if (op & QIB_RCVCTRL_INTRAVAIL_ENB)
|
|
dd->rcvctrl |= (mask << QLOGIC_IB_R_INTRAVAIL_SHIFT);
|
|
if (op & QIB_RCVCTRL_INTRAVAIL_DIS)
|
|
dd->rcvctrl &= ~(mask << QLOGIC_IB_R_INTRAVAIL_SHIFT);
|
|
qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl);
|
|
if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && dd->rhdrhead_intr_off) {
|
|
/* arm rcv interrupt */
|
|
val = qib_read_ureg32(dd, ur_rcvhdrhead, ctxt) |
|
|
dd->rhdrhead_intr_off;
|
|
qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
|
|
}
|
|
if (op & QIB_RCVCTRL_CTXT_ENB) {
|
|
/*
|
|
* Init the context registers also; if we were
|
|
* disabled, tail and head should both be zero
|
|
* already from the enable, but since we don't
|
|
* know, we have to do it explicitly.
|
|
*/
|
|
val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
|
|
qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
|
|
|
|
val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt);
|
|
dd->rcd[ctxt]->head = val;
|
|
/* If kctxt, interrupt on next receive. */
|
|
if (ctxt < dd->first_user_ctxt)
|
|
val |= dd->rhdrhead_intr_off;
|
|
qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt);
|
|
}
|
|
if (op & QIB_RCVCTRL_CTXT_DIS) {
|
|
/*
|
|
* Be paranoid, and never write 0's to these, just use an
|
|
* unused page. Of course,
|
|
* rcvhdraddr points to a large chunk of memory, so this
|
|
* could still trash things, but at least it won't trash
|
|
* page 0, and by disabling the ctxt, it should stop "soon",
|
|
* even if a packet or two is in already in flight after we
|
|
* disabled the ctxt. Only 6120 has this issue.
|
|
*/
|
|
if (ctxt >= 0) {
|
|
qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt,
|
|
dd->cspec->dummy_hdrq_phys);
|
|
qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt,
|
|
dd->cspec->dummy_hdrq_phys);
|
|
} else {
|
|
unsigned i;
|
|
|
|
for (i = 0; i < dd->cfgctxts; i++) {
|
|
qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr,
|
|
i, dd->cspec->dummy_hdrq_phys);
|
|
qib_write_kreg_ctxt(dd, kr_rcvhdraddr,
|
|
i, dd->cspec->dummy_hdrq_phys);
|
|
}
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Modify the SENDCTRL register in chip-specific way. This
|
|
* is a function there may be multiple such registers with
|
|
* slightly different layouts. Only operations actually used
|
|
* are implemented yet.
|
|
* Chip requires no back-back sendctrl writes, so write
|
|
* scratch register after writing sendctrl
|
|
*/
|
|
static void sendctrl_6120_mod(struct qib_pportdata *ppd, u32 op)
|
|
{
|
|
struct qib_devdata *dd = ppd->dd;
|
|
u64 tmp_dd_sendctrl;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&dd->sendctrl_lock, flags);
|
|
|
|
/* First the ones that are "sticky", saved in shadow */
|
|
if (op & QIB_SENDCTRL_CLEAR)
|
|
dd->sendctrl = 0;
|
|
if (op & QIB_SENDCTRL_SEND_DIS)
|
|
dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOEnable);
|
|
else if (op & QIB_SENDCTRL_SEND_ENB)
|
|
dd->sendctrl |= SYM_MASK(SendCtrl, PIOEnable);
|
|
if (op & QIB_SENDCTRL_AVAIL_DIS)
|
|
dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOBufAvailUpd);
|
|
else if (op & QIB_SENDCTRL_AVAIL_ENB)
|
|
dd->sendctrl |= SYM_MASK(SendCtrl, PIOBufAvailUpd);
|
|
|
|
if (op & QIB_SENDCTRL_DISARM_ALL) {
|
|
u32 i, last;
|
|
|
|
tmp_dd_sendctrl = dd->sendctrl;
|
|
/*
|
|
* disarm any that are not yet launched, disabling sends
|
|
* and updates until done.
|
|
*/
|
|
last = dd->piobcnt2k + dd->piobcnt4k;
|
|
tmp_dd_sendctrl &=
|
|
~(SYM_MASK(SendCtrl, PIOEnable) |
|
|
SYM_MASK(SendCtrl, PIOBufAvailUpd));
|
|
for (i = 0; i < last; i++) {
|
|
qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl |
|
|
SYM_MASK(SendCtrl, Disarm) | i);
|
|
qib_write_kreg(dd, kr_scratch, 0);
|
|
}
|
|
}
|
|
|
|
tmp_dd_sendctrl = dd->sendctrl;
|
|
|
|
if (op & QIB_SENDCTRL_FLUSH)
|
|
tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Abort);
|
|
if (op & QIB_SENDCTRL_DISARM)
|
|
tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) |
|
|
((op & QIB_6120_SendCtrl_DisarmPIOBuf_RMASK) <<
|
|
SYM_LSB(SendCtrl, DisarmPIOBuf));
|
|
if (op & QIB_SENDCTRL_AVAIL_BLIP)
|
|
tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, PIOBufAvailUpd);
|
|
|
|
qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl);
|
|
qib_write_kreg(dd, kr_scratch, 0);
|
|
|
|
if (op & QIB_SENDCTRL_AVAIL_BLIP) {
|
|
qib_write_kreg(dd, kr_sendctrl, dd->sendctrl);
|
|
qib_write_kreg(dd, kr_scratch, 0);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&dd->sendctrl_lock, flags);
|
|
|
|
if (op & QIB_SENDCTRL_FLUSH) {
|
|
u32 v;
|
|
/*
|
|
* ensure writes have hit chip, then do a few
|
|
* more reads, to allow DMA of pioavail registers
|
|
* to occur, so in-memory copy is in sync with
|
|
* the chip. Not always safe to sleep.
|
|
*/
|
|
v = qib_read_kreg32(dd, kr_scratch);
|
|
qib_write_kreg(dd, kr_scratch, v);
|
|
v = qib_read_kreg32(dd, kr_scratch);
|
|
qib_write_kreg(dd, kr_scratch, v);
|
|
qib_read_kreg32(dd, kr_scratch);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* qib_portcntr_6120 - read a per-port counter
|
|
* @dd: the qlogic_ib device
|
|
* @creg: the counter to snapshot
|
|
*/
|
|
static u64 qib_portcntr_6120(struct qib_pportdata *ppd, u32 reg)
|
|
{
|
|
u64 ret = 0ULL;
|
|
struct qib_devdata *dd = ppd->dd;
|
|
u16 creg;
|
|
/* 0xffff for unimplemented or synthesized counters */
|
|
static const u16 xlator[] = {
|
|
[QIBPORTCNTR_PKTSEND] = cr_pktsend,
|
|
[QIBPORTCNTR_WORDSEND] = cr_wordsend,
|
|
[QIBPORTCNTR_PSXMITDATA] = 0xffff,
|
|
[QIBPORTCNTR_PSXMITPKTS] = 0xffff,
|
|
[QIBPORTCNTR_PSXMITWAIT] = 0xffff,
|
|
[QIBPORTCNTR_SENDSTALL] = cr_sendstall,
|
|
[QIBPORTCNTR_PKTRCV] = cr_pktrcv,
|
|
[QIBPORTCNTR_PSRCVDATA] = 0xffff,
|
|
[QIBPORTCNTR_PSRCVPKTS] = 0xffff,
|
|
[QIBPORTCNTR_RCVEBP] = cr_rcvebp,
|
|
[QIBPORTCNTR_RCVOVFL] = cr_rcvovfl,
|
|
[QIBPORTCNTR_WORDRCV] = cr_wordrcv,
|
|
[QIBPORTCNTR_RXDROPPKT] = cr_rxdroppkt,
|
|
[QIBPORTCNTR_RXLOCALPHYERR] = 0xffff,
|
|
[QIBPORTCNTR_RXVLERR] = 0xffff,
|
|
[QIBPORTCNTR_ERRICRC] = cr_erricrc,
|
|
[QIBPORTCNTR_ERRVCRC] = cr_errvcrc,
|
|
[QIBPORTCNTR_ERRLPCRC] = cr_errlpcrc,
|
|
[QIBPORTCNTR_BADFORMAT] = cr_badformat,
|
|
[QIBPORTCNTR_ERR_RLEN] = cr_err_rlen,
|
|
[QIBPORTCNTR_IBSYMBOLERR] = cr_ibsymbolerr,
|
|
[QIBPORTCNTR_INVALIDRLEN] = cr_invalidrlen,
|
|
[QIBPORTCNTR_UNSUPVL] = cr_txunsupvl,
|
|
[QIBPORTCNTR_EXCESSBUFOVFL] = 0xffff,
|
|
[QIBPORTCNTR_ERRLINK] = cr_errlink,
|
|
[QIBPORTCNTR_IBLINKDOWN] = cr_iblinkdown,
|
|
[QIBPORTCNTR_IBLINKERRRECOV] = cr_iblinkerrrecov,
|
|
[QIBPORTCNTR_LLI] = 0xffff,
|
|
[QIBPORTCNTR_PSINTERVAL] = 0xffff,
|
|
[QIBPORTCNTR_PSSTART] = 0xffff,
|
|
[QIBPORTCNTR_PSSTAT] = 0xffff,
|
|
[QIBPORTCNTR_VL15PKTDROP] = 0xffff,
|
|
[QIBPORTCNTR_ERRPKEY] = cr_errpkey,
|
|
[QIBPORTCNTR_KHDROVFL] = 0xffff,
|
|
};
|
|
|
|
if (reg >= ARRAY_SIZE(xlator)) {
|
|
qib_devinfo(ppd->dd->pcidev,
|
|
"Unimplemented portcounter %u\n", reg);
|
|
goto done;
|
|
}
|
|
creg = xlator[reg];
|
|
|
|
/* handle counters requests not implemented as chip counters */
|
|
if (reg == QIBPORTCNTR_LLI)
|
|
ret = dd->cspec->lli_errs;
|
|
else if (reg == QIBPORTCNTR_EXCESSBUFOVFL)
|
|
ret = dd->cspec->overrun_thresh_errs;
|
|
else if (reg == QIBPORTCNTR_KHDROVFL) {
|
|
int i;
|
|
|
|
/* sum over all kernel contexts */
|
|
for (i = 0; i < dd->first_user_ctxt; i++)
|
|
ret += read_6120_creg32(dd, cr_portovfl + i);
|
|
} else if (reg == QIBPORTCNTR_PSSTAT)
|
|
ret = dd->cspec->pma_sample_status;
|
|
if (creg == 0xffff)
|
|
goto done;
|
|
|
|
/*
|
|
* only fast incrementing counters are 64bit; use 32 bit reads to
|
|
* avoid two independent reads when on opteron
|
|
*/
|
|
if (creg == cr_wordsend || creg == cr_wordrcv ||
|
|
creg == cr_pktsend || creg == cr_pktrcv)
|
|
ret = read_6120_creg(dd, creg);
|
|
else
|
|
ret = read_6120_creg32(dd, creg);
|
|
if (creg == cr_ibsymbolerr) {
|
|
if (dd->cspec->ibdeltainprog)
|
|
ret -= ret - dd->cspec->ibsymsnap;
|
|
ret -= dd->cspec->ibsymdelta;
|
|
} else if (creg == cr_iblinkerrrecov) {
|
|
if (dd->cspec->ibdeltainprog)
|
|
ret -= ret - dd->cspec->iblnkerrsnap;
|
|
ret -= dd->cspec->iblnkerrdelta;
|
|
}
|
|
if (reg == QIBPORTCNTR_RXDROPPKT) /* add special cased count */
|
|
ret += dd->cspec->rxfc_unsupvl_errs;
|
|
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Device counter names (not port-specific), one line per stat,
|
|
* single string. Used by utilities like ipathstats to print the stats
|
|
* in a way which works for different versions of drivers, without changing
|
|
* the utility. Names need to be 12 chars or less (w/o newline), for proper
|
|
* display by utility.
|
|
* Non-error counters are first.
|
|
* Start of "error" conters is indicated by a leading "E " on the first
|
|
* "error" counter, and doesn't count in label length.
|
|
* The EgrOvfl list needs to be last so we truncate them at the configured
|
|
* context count for the device.
|
|
* cntr6120indices contains the corresponding register indices.
|
|
*/
|
|
static const char cntr6120names[] =
|
|
"Interrupts\n"
|
|
"HostBusStall\n"
|
|
"E RxTIDFull\n"
|
|
"RxTIDInvalid\n"
|
|
"Ctxt0EgrOvfl\n"
|
|
"Ctxt1EgrOvfl\n"
|
|
"Ctxt2EgrOvfl\n"
|
|
"Ctxt3EgrOvfl\n"
|
|
"Ctxt4EgrOvfl\n";
|
|
|
|
static const size_t cntr6120indices[] = {
|
|
cr_lbint,
|
|
cr_lbflowstall,
|
|
cr_errtidfull,
|
|
cr_errtidvalid,
|
|
cr_portovfl + 0,
|
|
cr_portovfl + 1,
|
|
cr_portovfl + 2,
|
|
cr_portovfl + 3,
|
|
cr_portovfl + 4,
|
|
};
|
|
|
|
/*
|
|
* same as cntr6120names and cntr6120indices, but for port-specific counters.
|
|
* portcntr6120indices is somewhat complicated by some registers needing
|
|
* adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG
|
|
*/
|
|
static const char portcntr6120names[] =
|
|
"TxPkt\n"
|
|
"TxFlowPkt\n"
|
|
"TxWords\n"
|
|
"RxPkt\n"
|
|
"RxFlowPkt\n"
|
|
"RxWords\n"
|
|
"TxFlowStall\n"
|
|
"E IBStatusChng\n"
|
|
"IBLinkDown\n"
|
|
"IBLnkRecov\n"
|
|
"IBRxLinkErr\n"
|
|
"IBSymbolErr\n"
|
|
"RxLLIErr\n"
|
|
"RxBadFormat\n"
|
|
"RxBadLen\n"
|
|
"RxBufOvrfl\n"
|
|
"RxEBP\n"
|
|
"RxFlowCtlErr\n"
|
|
"RxICRCerr\n"
|
|
"RxLPCRCerr\n"
|
|
"RxVCRCerr\n"
|
|
"RxInvalLen\n"
|
|
"RxInvalPKey\n"
|
|
"RxPktDropped\n"
|
|
"TxBadLength\n"
|
|
"TxDropped\n"
|
|
"TxInvalLen\n"
|
|
"TxUnderrun\n"
|
|
"TxUnsupVL\n"
|
|
;
|
|
|
|
#define _PORT_VIRT_FLAG 0x8000 /* "virtual", need adjustments */
|
|
static const size_t portcntr6120indices[] = {
|
|
QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG,
|
|
cr_pktsendflow,
|
|
QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG,
|
|
cr_pktrcvflowctrl,
|
|
QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG,
|
|
cr_ibstatuschange,
|
|
QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_LLI | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG,
|
|
cr_rcvflowctrl_err,
|
|
QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG,
|
|
QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG,
|
|
cr_invalidslen,
|
|
cr_senddropped,
|
|
cr_errslen,
|
|
cr_sendunderrun,
|
|
cr_txunsupvl,
|
|
};
|
|
|
|
/* do all the setup to make the counter reads efficient later */
|
|
static void init_6120_cntrnames(struct qib_devdata *dd)
|
|
{
|
|
int i, j = 0;
|
|
char *s;
|
|
|
|
for (i = 0, s = (char *)cntr6120names; s && j <= dd->cfgctxts;
|
|
i++) {
|
|
/* we always have at least one counter before the egrovfl */
|
|
if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12))
|
|
j = 1;
|
|
s = strchr(s + 1, '\n');
|
|
if (s && j)
|
|
j++;
|
|
}
|
|
dd->cspec->ncntrs = i;
|
|
if (!s)
|
|
/* full list; size is without terminating null */
|
|
dd->cspec->cntrnamelen = sizeof(cntr6120names) - 1;
|
|
else
|
|
dd->cspec->cntrnamelen = 1 + s - cntr6120names;
|
|
dd->cspec->cntrs = kmalloc(dd->cspec->ncntrs
|
|
* sizeof(u64), GFP_KERNEL);
|
|
if (!dd->cspec->cntrs)
|
|
qib_dev_err(dd, "Failed allocation for counters\n");
|
|
|
|
for (i = 0, s = (char *)portcntr6120names; s; i++)
|
|
s = strchr(s + 1, '\n');
|
|
dd->cspec->nportcntrs = i - 1;
|
|
dd->cspec->portcntrnamelen = sizeof(portcntr6120names) - 1;
|
|
dd->cspec->portcntrs = kmalloc(dd->cspec->nportcntrs
|
|
* sizeof(u64), GFP_KERNEL);
|
|
if (!dd->cspec->portcntrs)
|
|
qib_dev_err(dd, "Failed allocation for portcounters\n");
|
|
}
|
|
|
|
static u32 qib_read_6120cntrs(struct qib_devdata *dd, loff_t pos, char **namep,
|
|
u64 **cntrp)
|
|
{
|
|
u32 ret;
|
|
|
|
if (namep) {
|
|
ret = dd->cspec->cntrnamelen;
|
|
if (pos >= ret)
|
|
ret = 0; /* final read after getting everything */
|
|
else
|
|
*namep = (char *)cntr6120names;
|
|
} else {
|
|
u64 *cntr = dd->cspec->cntrs;
|
|
int i;
|
|
|
|
ret = dd->cspec->ncntrs * sizeof(u64);
|
|
if (!cntr || pos >= ret) {
|
|
/* everything read, or couldn't get memory */
|
|
ret = 0;
|
|
goto done;
|
|
}
|
|
if (pos >= ret) {
|
|
ret = 0; /* final read after getting everything */
|
|
goto done;
|
|
}
|
|
*cntrp = cntr;
|
|
for (i = 0; i < dd->cspec->ncntrs; i++)
|
|
*cntr++ = read_6120_creg32(dd, cntr6120indices[i]);
|
|
}
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
static u32 qib_read_6120portcntrs(struct qib_devdata *dd, loff_t pos, u32 port,
|
|
char **namep, u64 **cntrp)
|
|
{
|
|
u32 ret;
|
|
|
|
if (namep) {
|
|
ret = dd->cspec->portcntrnamelen;
|
|
if (pos >= ret)
|
|
ret = 0; /* final read after getting everything */
|
|
else
|
|
*namep = (char *)portcntr6120names;
|
|
} else {
|
|
u64 *cntr = dd->cspec->portcntrs;
|
|
struct qib_pportdata *ppd = &dd->pport[port];
|
|
int i;
|
|
|
|
ret = dd->cspec->nportcntrs * sizeof(u64);
|
|
if (!cntr || pos >= ret) {
|
|
/* everything read, or couldn't get memory */
|
|
ret = 0;
|
|
goto done;
|
|
}
|
|
*cntrp = cntr;
|
|
for (i = 0; i < dd->cspec->nportcntrs; i++) {
|
|
if (portcntr6120indices[i] & _PORT_VIRT_FLAG)
|
|
*cntr++ = qib_portcntr_6120(ppd,
|
|
portcntr6120indices[i] &
|
|
~_PORT_VIRT_FLAG);
|
|
else
|
|
*cntr++ = read_6120_creg32(dd,
|
|
portcntr6120indices[i]);
|
|
}
|
|
}
|
|
done:
|
|
return ret;
|
|
}
|
|
|
|
static void qib_chk_6120_errormask(struct qib_devdata *dd)
|
|
{
|
|
static u32 fixed;
|
|
u32 ctrl;
|
|
unsigned long errormask;
|
|
unsigned long hwerrs;
|
|
|
|
if (!dd->cspec->errormask || !(dd->flags & QIB_INITTED))
|
|
return;
|
|
|
|
errormask = qib_read_kreg64(dd, kr_errmask);
|
|
|
|
if (errormask == dd->cspec->errormask)
|
|
return;
|
|
fixed++;
|
|
|
|
hwerrs = qib_read_kreg64(dd, kr_hwerrstatus);
|
|
ctrl = qib_read_kreg32(dd, kr_control);
|
|
|
|
qib_write_kreg(dd, kr_errmask,
|
|
dd->cspec->errormask);
|
|
|
|
if ((hwerrs & dd->cspec->hwerrmask) ||
|
|
(ctrl & QLOGIC_IB_C_FREEZEMODE)) {
|
|
qib_write_kreg(dd, kr_hwerrclear, 0ULL);
|
|
qib_write_kreg(dd, kr_errclear, 0ULL);
|
|
/* force re-interrupt of pending events, just in case */
|
|
qib_write_kreg(dd, kr_intclear, 0ULL);
|
|
qib_devinfo(dd->pcidev,
|
|
"errormask fixed(%u) %lx->%lx, ctrl %x hwerr %lx\n",
|
|
fixed, errormask, (unsigned long)dd->cspec->errormask,
|
|
ctrl, hwerrs);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* qib_get_faststats - get word counters from chip before they overflow
|
|
* @opaque - contains a pointer to the qlogic_ib device qib_devdata
|
|
*
|
|
* This needs more work; in particular, decision on whether we really
|
|
* need traffic_wds done the way it is
|
|
* called from add_timer
|
|
*/
|
|
static void qib_get_6120_faststats(unsigned long opaque)
|
|
{
|
|
struct qib_devdata *dd = (struct qib_devdata *) opaque;
|
|
struct qib_pportdata *ppd = dd->pport;
|
|
unsigned long flags;
|
|
u64 traffic_wds;
|
|
|
|
/*
|
|
* don't access the chip while running diags, or memory diags can
|
|
* fail
|
|
*/
|
|
if (!(dd->flags & QIB_INITTED) || dd->diag_client)
|
|
/* but re-arm the timer, for diags case; won't hurt other */
|
|
goto done;
|
|
|
|
/*
|
|
* We now try to maintain an activity timer, based on traffic
|
|
* exceeding a threshold, so we need to check the word-counts
|
|
* even if they are 64-bit.
|
|
*/
|
|
traffic_wds = qib_portcntr_6120(ppd, cr_wordsend) +
|
|
qib_portcntr_6120(ppd, cr_wordrcv);
|
|
spin_lock_irqsave(&dd->eep_st_lock, flags);
|
|
traffic_wds -= dd->traffic_wds;
|
|
dd->traffic_wds += traffic_wds;
|
|
if (traffic_wds >= QIB_TRAFFIC_ACTIVE_THRESHOLD)
|
|
atomic_add(5, &dd->active_time); /* S/B #define */
|
|
spin_unlock_irqrestore(&dd->eep_st_lock, flags);
|
|
|
|
qib_chk_6120_errormask(dd);
|
|
done:
|
|
mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
|
|
}
|
|
|
|
/* no interrupt fallback for these chips */
|
|
static int qib_6120_nointr_fallback(struct qib_devdata *dd)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* reset the XGXS (between serdes and IBC). Slightly less intrusive
|
|
* than resetting the IBC or external link state, and useful in some
|
|
* cases to cause some retraining. To do this right, we reset IBC
|
|
* as well.
|
|
*/
|
|
static void qib_6120_xgxs_reset(struct qib_pportdata *ppd)
|
|
{
|
|
u64 val, prev_val;
|
|
struct qib_devdata *dd = ppd->dd;
|
|
|
|
prev_val = qib_read_kreg64(dd, kr_xgxs_cfg);
|
|
val = prev_val | QLOGIC_IB_XGXS_RESET;
|
|
prev_val &= ~QLOGIC_IB_XGXS_RESET; /* be sure */
|
|
qib_write_kreg(dd, kr_control,
|
|
dd->control & ~QLOGIC_IB_C_LINKENABLE);
|
|
qib_write_kreg(dd, kr_xgxs_cfg, val);
|
|
qib_read_kreg32(dd, kr_scratch);
|
|
qib_write_kreg(dd, kr_xgxs_cfg, prev_val);
|
|
qib_write_kreg(dd, kr_control, dd->control);
|
|
}
|
|
|
|
static int qib_6120_get_ib_cfg(struct qib_pportdata *ppd, int which)
|
|
{
|
|
int ret;
|
|
|
|
switch (which) {
|
|
case QIB_IB_CFG_LWID:
|
|
ret = ppd->link_width_active;
|
|
break;
|
|
|
|
case QIB_IB_CFG_SPD:
|
|
ret = ppd->link_speed_active;
|
|
break;
|
|
|
|
case QIB_IB_CFG_LWID_ENB:
|
|
ret = ppd->link_width_enabled;
|
|
break;
|
|
|
|
case QIB_IB_CFG_SPD_ENB:
|
|
ret = ppd->link_speed_enabled;
|
|
break;
|
|
|
|
case QIB_IB_CFG_OP_VLS:
|
|
ret = ppd->vls_operational;
|
|
break;
|
|
|
|
case QIB_IB_CFG_VL_HIGH_CAP:
|
|
ret = 0;
|
|
break;
|
|
|
|
case QIB_IB_CFG_VL_LOW_CAP:
|
|
ret = 0;
|
|
break;
|
|
|
|
case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
|
|
ret = SYM_FIELD(ppd->dd->cspec->ibcctrl, IBCCtrl,
|
|
OverrunThreshold);
|
|
break;
|
|
|
|
case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
|
|
ret = SYM_FIELD(ppd->dd->cspec->ibcctrl, IBCCtrl,
|
|
PhyerrThreshold);
|
|
break;
|
|
|
|
case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
|
|
/* will only take effect when the link state changes */
|
|
ret = (ppd->dd->cspec->ibcctrl &
|
|
SYM_MASK(IBCCtrl, LinkDownDefaultState)) ?
|
|
IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL;
|
|
break;
|
|
|
|
case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */
|
|
ret = 0; /* no heartbeat on this chip */
|
|
break;
|
|
|
|
case QIB_IB_CFG_PMA_TICKS:
|
|
ret = 250; /* 1 usec. */
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* We assume range checking is already done, if needed.
|
|
*/
|
|
static int qib_6120_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
|
|
{
|
|
struct qib_devdata *dd = ppd->dd;
|
|
int ret = 0;
|
|
u64 val64;
|
|
u16 lcmd, licmd;
|
|
|
|
switch (which) {
|
|
case QIB_IB_CFG_LWID_ENB:
|
|
ppd->link_width_enabled = val;
|
|
break;
|
|
|
|
case QIB_IB_CFG_SPD_ENB:
|
|
ppd->link_speed_enabled = val;
|
|
break;
|
|
|
|
case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */
|
|
val64 = SYM_FIELD(dd->cspec->ibcctrl, IBCCtrl,
|
|
OverrunThreshold);
|
|
if (val64 != val) {
|
|
dd->cspec->ibcctrl &=
|
|
~SYM_MASK(IBCCtrl, OverrunThreshold);
|
|
dd->cspec->ibcctrl |= (u64) val <<
|
|
SYM_LSB(IBCCtrl, OverrunThreshold);
|
|
qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl);
|
|
qib_write_kreg(dd, kr_scratch, 0);
|
|
}
|
|
break;
|
|
|
|
case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */
|
|
val64 = SYM_FIELD(dd->cspec->ibcctrl, IBCCtrl,
|
|
PhyerrThreshold);
|
|
if (val64 != val) {
|
|
dd->cspec->ibcctrl &=
|
|
~SYM_MASK(IBCCtrl, PhyerrThreshold);
|
|
dd->cspec->ibcctrl |= (u64) val <<
|
|
SYM_LSB(IBCCtrl, PhyerrThreshold);
|
|
qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl);
|
|
qib_write_kreg(dd, kr_scratch, 0);
|
|
}
|
|
break;
|
|
|
|
case QIB_IB_CFG_PKEYS: /* update pkeys */
|
|
val64 = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) |
|
|
((u64) ppd->pkeys[2] << 32) |
|
|
((u64) ppd->pkeys[3] << 48);
|
|
qib_write_kreg(dd, kr_partitionkey, val64);
|
|
break;
|
|
|
|
case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */
|
|
/* will only take effect when the link state changes */
|
|
if (val == IB_LINKINITCMD_POLL)
|
|
dd->cspec->ibcctrl &=
|
|
~SYM_MASK(IBCCtrl, LinkDownDefaultState);
|
|
else /* SLEEP */
|
|
dd->cspec->ibcctrl |=
|
|
SYM_MASK(IBCCtrl, LinkDownDefaultState);
|
|
qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl);
|
|
qib_write_kreg(dd, kr_scratch, 0);
|
|
break;
|
|
|
|
case QIB_IB_CFG_MTU: /* update the MTU in IBC */
|
|
/*
|
|
* Update our housekeeping variables, and set IBC max
|
|
* size, same as init code; max IBC is max we allow in
|
|
* buffer, less the qword pbc, plus 1 for ICRC, in dwords
|
|
* Set even if it's unchanged, print debug message only
|
|
* on changes.
|
|
*/
|
|
val = (ppd->ibmaxlen >> 2) + 1;
|
|
dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, MaxPktLen);
|
|
dd->cspec->ibcctrl |= (u64)val <<
|
|
SYM_LSB(IBCCtrl, MaxPktLen);
|
|
qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl);
|
|
qib_write_kreg(dd, kr_scratch, 0);
|
|
break;
|
|
|
|
case QIB_IB_CFG_LSTATE: /* set the IB link state */
|
|
switch (val & 0xffff0000) {
|
|
case IB_LINKCMD_DOWN:
|
|
lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN;
|
|
if (!dd->cspec->ibdeltainprog) {
|
|
dd->cspec->ibdeltainprog = 1;
|
|
dd->cspec->ibsymsnap =
|
|
read_6120_creg32(dd, cr_ibsymbolerr);
|
|
dd->cspec->iblnkerrsnap =
|
|
read_6120_creg32(dd, cr_iblinkerrrecov);
|
|
}
|
|
break;
|
|
|
|
case IB_LINKCMD_ARMED:
|
|
lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED;
|
|
break;
|
|
|
|
case IB_LINKCMD_ACTIVE:
|
|
lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE;
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16);
|
|
goto bail;
|
|
}
|
|
switch (val & 0xffff) {
|
|
case IB_LINKINITCMD_NOP:
|
|
licmd = 0;
|
|
break;
|
|
|
|
case IB_LINKINITCMD_POLL:
|
|
licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL;
|
|
break;
|
|
|
|
case IB_LINKINITCMD_SLEEP:
|
|
licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP;
|
|
break;
|
|
|
|
case IB_LINKINITCMD_DISABLE:
|
|
licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE;
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
qib_dev_err(dd, "bad linkinitcmd req 0x%x\n",
|
|
val & 0xffff);
|
|
goto bail;
|
|
}
|
|
qib_set_ib_6120_lstate(ppd, lcmd, licmd);
|
|
goto bail;
|
|
|
|
case QIB_IB_CFG_HRTBT:
|
|
ret = -EINVAL;
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
static int qib_6120_set_loopback(struct qib_pportdata *ppd, const char *what)
|
|
{
|
|
int ret = 0;
|
|
if (!strncmp(what, "ibc", 3)) {
|
|
ppd->dd->cspec->ibcctrl |= SYM_MASK(IBCCtrl, Loopback);
|
|
qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n",
|
|
ppd->dd->unit, ppd->port);
|
|
} else if (!strncmp(what, "off", 3)) {
|
|
ppd->dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback);
|
|
qib_devinfo(ppd->dd->pcidev,
|
|
"Disabling IB%u:%u IBC loopback (normal)\n",
|
|
ppd->dd->unit, ppd->port);
|
|
} else
|
|
ret = -EINVAL;
|
|
if (!ret) {
|
|
qib_write_kreg(ppd->dd, kr_ibcctrl, ppd->dd->cspec->ibcctrl);
|
|
qib_write_kreg(ppd->dd, kr_scratch, 0);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void pma_6120_timer(unsigned long data)
|
|
{
|
|
struct qib_pportdata *ppd = (struct qib_pportdata *)data;
|
|
struct qib_chip_specific *cs = ppd->dd->cspec;
|
|
struct qib_ibport *ibp = &ppd->ibport_data;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ibp->lock, flags);
|
|
if (cs->pma_sample_status == IB_PMA_SAMPLE_STATUS_STARTED) {
|
|
cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING;
|
|
qib_snapshot_counters(ppd, &cs->sword, &cs->rword,
|
|
&cs->spkts, &cs->rpkts, &cs->xmit_wait);
|
|
mod_timer(&cs->pma_timer,
|
|
jiffies + usecs_to_jiffies(ibp->pma_sample_interval));
|
|
} else if (cs->pma_sample_status == IB_PMA_SAMPLE_STATUS_RUNNING) {
|
|
u64 ta, tb, tc, td, te;
|
|
|
|
cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE;
|
|
qib_snapshot_counters(ppd, &ta, &tb, &tc, &td, &te);
|
|
|
|
cs->sword = ta - cs->sword;
|
|
cs->rword = tb - cs->rword;
|
|
cs->spkts = tc - cs->spkts;
|
|
cs->rpkts = td - cs->rpkts;
|
|
cs->xmit_wait = te - cs->xmit_wait;
|
|
}
|
|
spin_unlock_irqrestore(&ibp->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* Note that the caller has the ibp->lock held.
|
|
*/
|
|
static void qib_set_cntr_6120_sample(struct qib_pportdata *ppd, u32 intv,
|
|
u32 start)
|
|
{
|
|
struct qib_chip_specific *cs = ppd->dd->cspec;
|
|
|
|
if (start && intv) {
|
|
cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_STARTED;
|
|
mod_timer(&cs->pma_timer, jiffies + usecs_to_jiffies(start));
|
|
} else if (intv) {
|
|
cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING;
|
|
qib_snapshot_counters(ppd, &cs->sword, &cs->rword,
|
|
&cs->spkts, &cs->rpkts, &cs->xmit_wait);
|
|
mod_timer(&cs->pma_timer, jiffies + usecs_to_jiffies(intv));
|
|
} else {
|
|
cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE;
|
|
cs->sword = 0;
|
|
cs->rword = 0;
|
|
cs->spkts = 0;
|
|
cs->rpkts = 0;
|
|
cs->xmit_wait = 0;
|
|
}
|
|
}
|
|
|
|
static u32 qib_6120_iblink_state(u64 ibcs)
|
|
{
|
|
u32 state = (u32)SYM_FIELD(ibcs, IBCStatus, LinkState);
|
|
|
|
switch (state) {
|
|
case IB_6120_L_STATE_INIT:
|
|
state = IB_PORT_INIT;
|
|
break;
|
|
case IB_6120_L_STATE_ARM:
|
|
state = IB_PORT_ARMED;
|
|
break;
|
|
case IB_6120_L_STATE_ACTIVE:
|
|
/* fall through */
|
|
case IB_6120_L_STATE_ACT_DEFER:
|
|
state = IB_PORT_ACTIVE;
|
|
break;
|
|
default: /* fall through */
|
|
case IB_6120_L_STATE_DOWN:
|
|
state = IB_PORT_DOWN;
|
|
break;
|
|
}
|
|
return state;
|
|
}
|
|
|
|
/* returns the IBTA port state, rather than the IBC link training state */
|
|
static u8 qib_6120_phys_portstate(u64 ibcs)
|
|
{
|
|
u8 state = (u8)SYM_FIELD(ibcs, IBCStatus, LinkTrainingState);
|
|
return qib_6120_physportstate[state];
|
|
}
|
|
|
|
static int qib_6120_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&ppd->lflags_lock, flags);
|
|
ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY;
|
|
spin_unlock_irqrestore(&ppd->lflags_lock, flags);
|
|
|
|
if (ibup) {
|
|
if (ppd->dd->cspec->ibdeltainprog) {
|
|
ppd->dd->cspec->ibdeltainprog = 0;
|
|
ppd->dd->cspec->ibsymdelta +=
|
|
read_6120_creg32(ppd->dd, cr_ibsymbolerr) -
|
|
ppd->dd->cspec->ibsymsnap;
|
|
ppd->dd->cspec->iblnkerrdelta +=
|
|
read_6120_creg32(ppd->dd, cr_iblinkerrrecov) -
|
|
ppd->dd->cspec->iblnkerrsnap;
|
|
}
|
|
qib_hol_init(ppd);
|
|
} else {
|
|
ppd->dd->cspec->lli_counter = 0;
|
|
if (!ppd->dd->cspec->ibdeltainprog) {
|
|
ppd->dd->cspec->ibdeltainprog = 1;
|
|
ppd->dd->cspec->ibsymsnap =
|
|
read_6120_creg32(ppd->dd, cr_ibsymbolerr);
|
|
ppd->dd->cspec->iblnkerrsnap =
|
|
read_6120_creg32(ppd->dd, cr_iblinkerrrecov);
|
|
}
|
|
qib_hol_down(ppd);
|
|
}
|
|
|
|
qib_6120_setup_setextled(ppd, ibup);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Does read/modify/write to appropriate registers to
|
|
* set output and direction bits selected by mask.
|
|
* these are in their canonical postions (e.g. lsb of
|
|
* dir will end up in D48 of extctrl on existing chips).
|
|
* returns contents of GP Inputs.
|
|
*/
|
|
static int gpio_6120_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask)
|
|
{
|
|
u64 read_val, new_out;
|
|
unsigned long flags;
|
|
|
|
if (mask) {
|
|
/* some bits being written, lock access to GPIO */
|
|
dir &= mask;
|
|
out &= mask;
|
|
spin_lock_irqsave(&dd->cspec->gpio_lock, flags);
|
|
dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe));
|
|
dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe));
|
|
new_out = (dd->cspec->gpio_out & ~mask) | out;
|
|
|
|
qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl);
|
|
qib_write_kreg(dd, kr_gpio_out, new_out);
|
|
dd->cspec->gpio_out = new_out;
|
|
spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
|
|
}
|
|
/*
|
|
* It is unlikely that a read at this time would get valid
|
|
* data on a pin whose direction line was set in the same
|
|
* call to this function. We include the read here because
|
|
* that allows us to potentially combine a change on one pin with
|
|
* a read on another, and because the old code did something like
|
|
* this.
|
|
*/
|
|
read_val = qib_read_kreg64(dd, kr_extstatus);
|
|
return SYM_FIELD(read_val, EXTStatus, GPIOIn);
|
|
}
|
|
|
|
/*
|
|
* Read fundamental info we need to use the chip. These are
|
|
* the registers that describe chip capabilities, and are
|
|
* saved in shadow registers.
|
|
*/
|
|
static void get_6120_chip_params(struct qib_devdata *dd)
|
|
{
|
|
u64 val;
|
|
u32 piobufs;
|
|
int mtu;
|
|
|
|
dd->uregbase = qib_read_kreg32(dd, kr_userregbase);
|
|
|
|
dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt);
|
|
dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase);
|
|
dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase);
|
|
dd->palign = qib_read_kreg32(dd, kr_palign);
|
|
dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase);
|
|
dd->pio2k_bufbase = dd->piobufbase & 0xffffffff;
|
|
|
|
dd->rcvhdrcnt = qib_read_kreg32(dd, kr_rcvegrcnt);
|
|
|
|
val = qib_read_kreg64(dd, kr_sendpiosize);
|
|
dd->piosize2k = val & ~0U;
|
|
dd->piosize4k = val >> 32;
|
|
|
|
mtu = ib_mtu_enum_to_int(qib_ibmtu);
|
|
if (mtu == -1)
|
|
mtu = QIB_DEFAULT_MTU;
|
|
dd->pport->ibmtu = (u32)mtu;
|
|
|
|
val = qib_read_kreg64(dd, kr_sendpiobufcnt);
|
|
dd->piobcnt2k = val & ~0U;
|
|
dd->piobcnt4k = val >> 32;
|
|
dd->last_pio = dd->piobcnt4k + dd->piobcnt2k - 1;
|
|
/* these may be adjusted in init_chip_wc_pat() */
|
|
dd->pio2kbase = (u32 __iomem *)
|
|
(((char __iomem *)dd->kregbase) + dd->pio2k_bufbase);
|
|
if (dd->piobcnt4k) {
|
|
dd->pio4kbase = (u32 __iomem *)
|
|
(((char __iomem *) dd->kregbase) +
|
|
(dd->piobufbase >> 32));
|
|
/*
|
|
* 4K buffers take 2 pages; we use roundup just to be
|
|
* paranoid; we calculate it once here, rather than on
|
|
* ever buf allocate
|
|
*/
|
|
dd->align4k = ALIGN(dd->piosize4k, dd->palign);
|
|
}
|
|
|
|
piobufs = dd->piobcnt4k + dd->piobcnt2k;
|
|
|
|
dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) /
|
|
(sizeof(u64) * BITS_PER_BYTE / 2);
|
|
}
|
|
|
|
/*
|
|
* The chip base addresses in cspec and cpspec have to be set
|
|
* after possible init_chip_wc_pat(), rather than in
|
|
* get_6120_chip_params(), so split out as separate function
|
|
*/
|
|
static void set_6120_baseaddrs(struct qib_devdata *dd)
|
|
{
|
|
u32 cregbase;
|
|
cregbase = qib_read_kreg32(dd, kr_counterregbase);
|
|
dd->cspec->cregbase = (u64 __iomem *)
|
|
((char __iomem *) dd->kregbase + cregbase);
|
|
|
|
dd->egrtidbase = (u64 __iomem *)
|
|
((char __iomem *) dd->kregbase + dd->rcvegrbase);
|
|
}
|
|
|
|
/*
|
|
* Write the final few registers that depend on some of the
|
|
* init setup. Done late in init, just before bringing up
|
|
* the serdes.
|
|
*/
|
|
static int qib_late_6120_initreg(struct qib_devdata *dd)
|
|
{
|
|
int ret = 0;
|
|
u64 val;
|
|
|
|
qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize);
|
|
qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize);
|
|
qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt);
|
|
qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys);
|
|
val = qib_read_kreg64(dd, kr_sendpioavailaddr);
|
|
if (val != dd->pioavailregs_phys) {
|
|
qib_dev_err(dd,
|
|
"Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n",
|
|
(unsigned long) dd->pioavailregs_phys,
|
|
(unsigned long long) val);
|
|
ret = -EINVAL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int init_6120_variables(struct qib_devdata *dd)
|
|
{
|
|
int ret = 0;
|
|
struct qib_pportdata *ppd;
|
|
u32 sbufs;
|
|
|
|
ppd = (struct qib_pportdata *)(dd + 1);
|
|
dd->pport = ppd;
|
|
dd->num_pports = 1;
|
|
|
|
dd->cspec = (struct qib_chip_specific *)(ppd + dd->num_pports);
|
|
ppd->cpspec = NULL; /* not used in this chip */
|
|
|
|
spin_lock_init(&dd->cspec->kernel_tid_lock);
|
|
spin_lock_init(&dd->cspec->user_tid_lock);
|
|
spin_lock_init(&dd->cspec->rcvmod_lock);
|
|
spin_lock_init(&dd->cspec->gpio_lock);
|
|
|
|
/* we haven't yet set QIB_PRESENT, so use read directly */
|
|
dd->revision = readq(&dd->kregbase[kr_revision]);
|
|
|
|
if ((dd->revision & 0xffffffffU) == 0xffffffffU) {
|
|
qib_dev_err(dd,
|
|
"Revision register read failure, giving up initialization\n");
|
|
ret = -ENODEV;
|
|
goto bail;
|
|
}
|
|
dd->flags |= QIB_PRESENT; /* now register routines work */
|
|
|
|
dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R,
|
|
ChipRevMajor);
|
|
dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R,
|
|
ChipRevMinor);
|
|
|
|
get_6120_chip_params(dd);
|
|
pe_boardname(dd); /* fill in boardname */
|
|
|
|
/*
|
|
* GPIO bits for TWSI data and clock,
|
|
* used for serial EEPROM.
|
|
*/
|
|
dd->gpio_sda_num = _QIB_GPIO_SDA_NUM;
|
|
dd->gpio_scl_num = _QIB_GPIO_SCL_NUM;
|
|
dd->twsi_eeprom_dev = QIB_TWSI_NO_DEV;
|
|
|
|
if (qib_unordered_wc())
|
|
dd->flags |= QIB_PIO_FLUSH_WC;
|
|
|
|
/*
|
|
* EEPROM error log 0 is TXE Parity errors. 1 is RXE Parity.
|
|
* 2 is Some Misc, 3 is reserved for future.
|
|
*/
|
|
dd->eep_st_masks[0].hwerrs_to_log = HWE_MASK(TXEMemParityErr);
|
|
|
|
/* Ignore errors in PIO/PBC on systems with unordered write-combining */
|
|
if (qib_unordered_wc())
|
|
dd->eep_st_masks[0].hwerrs_to_log &= ~TXE_PIO_PARITY;
|
|
|
|
dd->eep_st_masks[1].hwerrs_to_log = HWE_MASK(RXEMemParityErr);
|
|
|
|
dd->eep_st_masks[2].errs_to_log = ERR_MASK(ResetNegated);
|
|
|
|
ret = qib_init_pportdata(ppd, dd, 0, 1);
|
|
if (ret)
|
|
goto bail;
|
|
ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X;
|
|
ppd->link_speed_supported = QIB_IB_SDR;
|
|
ppd->link_width_enabled = IB_WIDTH_4X;
|
|
ppd->link_speed_enabled = ppd->link_speed_supported;
|
|
/* these can't change for this chip, so set once */
|
|
ppd->link_width_active = ppd->link_width_enabled;
|
|
ppd->link_speed_active = ppd->link_speed_enabled;
|
|
ppd->vls_supported = IB_VL_VL0;
|
|
ppd->vls_operational = ppd->vls_supported;
|
|
|
|
dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE;
|
|
dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE;
|
|
dd->rhf_offset = 0;
|
|
|
|
/* we always allocate at least 2048 bytes for eager buffers */
|
|
ret = ib_mtu_enum_to_int(qib_ibmtu);
|
|
dd->rcvegrbufsize = ret != -1 ? max(ret, 2048) : QIB_DEFAULT_MTU;
|
|
BUG_ON(!is_power_of_2(dd->rcvegrbufsize));
|
|
dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize);
|
|
|
|
qib_6120_tidtemplate(dd);
|
|
|
|
/*
|
|
* We can request a receive interrupt for 1 or
|
|
* more packets from current offset. For now, we set this
|
|
* up for a single packet.
|
|
*/
|
|
dd->rhdrhead_intr_off = 1ULL << 32;
|
|
|
|
/* setup the stats timer; the add_timer is done at end of init */
|
|
init_timer(&dd->stats_timer);
|
|
dd->stats_timer.function = qib_get_6120_faststats;
|
|
dd->stats_timer.data = (unsigned long) dd;
|
|
|
|
init_timer(&dd->cspec->pma_timer);
|
|
dd->cspec->pma_timer.function = pma_6120_timer;
|
|
dd->cspec->pma_timer.data = (unsigned long) ppd;
|
|
|
|
dd->ureg_align = qib_read_kreg32(dd, kr_palign);
|
|
|
|
dd->piosize2kmax_dwords = dd->piosize2k >> 2;
|
|
qib_6120_config_ctxts(dd);
|
|
qib_set_ctxtcnt(dd);
|
|
|
|
if (qib_wc_pat) {
|
|
ret = init_chip_wc_pat(dd, 0);
|
|
if (ret)
|
|
goto bail;
|
|
}
|
|
set_6120_baseaddrs(dd); /* set chip access pointers now */
|
|
|
|
ret = 0;
|
|
if (qib_mini_init)
|
|
goto bail;
|
|
|
|
qib_num_cfg_vls = 1; /* if any 6120's, only one VL */
|
|
|
|
ret = qib_create_ctxts(dd);
|
|
init_6120_cntrnames(dd);
|
|
|
|
/* use all of 4KB buffers for the kernel, otherwise 16 */
|
|
sbufs = dd->piobcnt4k ? dd->piobcnt4k : 16;
|
|
|
|
dd->lastctxt_piobuf = dd->piobcnt2k + dd->piobcnt4k - sbufs;
|
|
dd->pbufsctxt = dd->lastctxt_piobuf /
|
|
(dd->cfgctxts - dd->first_user_ctxt);
|
|
|
|
if (ret)
|
|
goto bail;
|
|
bail:
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* For this chip, we want to use the same buffer every time
|
|
* when we are trying to bring the link up (they are always VL15
|
|
* packets). At that link state the packet should always go out immediately
|
|
* (or at least be discarded at the tx interface if the link is down).
|
|
* If it doesn't, and the buffer isn't available, that means some other
|
|
* sender has gotten ahead of us, and is preventing our packet from going
|
|
* out. In that case, we flush all packets, and try again. If that still
|
|
* fails, we fail the request, and hope things work the next time around.
|
|
*
|
|
* We don't need very complicated heuristics on whether the packet had
|
|
* time to go out or not, since even at SDR 1X, it goes out in very short
|
|
* time periods, covered by the chip reads done here and as part of the
|
|
* flush.
|
|
*/
|
|
static u32 __iomem *get_6120_link_buf(struct qib_pportdata *ppd, u32 *bnum)
|
|
{
|
|
u32 __iomem *buf;
|
|
u32 lbuf = ppd->dd->piobcnt2k + ppd->dd->piobcnt4k - 1;
|
|
|
|
/*
|
|
* always blip to get avail list updated, since it's almost
|
|
* always needed, and is fairly cheap.
|
|
*/
|
|
sendctrl_6120_mod(ppd->dd->pport, QIB_SENDCTRL_AVAIL_BLIP);
|
|
qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */
|
|
buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf);
|
|
if (buf)
|
|
goto done;
|
|
|
|
sendctrl_6120_mod(ppd, QIB_SENDCTRL_DISARM_ALL | QIB_SENDCTRL_FLUSH |
|
|
QIB_SENDCTRL_AVAIL_BLIP);
|
|
ppd->dd->upd_pio_shadow = 1; /* update our idea of what's busy */
|
|
qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */
|
|
buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf);
|
|
done:
|
|
return buf;
|
|
}
|
|
|
|
static u32 __iomem *qib_6120_getsendbuf(struct qib_pportdata *ppd, u64 pbc,
|
|
u32 *pbufnum)
|
|
{
|
|
u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK;
|
|
struct qib_devdata *dd = ppd->dd;
|
|
u32 __iomem *buf;
|
|
|
|
if (((pbc >> 32) & PBC_6120_VL15_SEND_CTRL) &&
|
|
!(ppd->lflags & (QIBL_IB_AUTONEG_INPROG | QIBL_LINKACTIVE)))
|
|
buf = get_6120_link_buf(ppd, pbufnum);
|
|
else {
|
|
|
|
if ((plen + 1) > dd->piosize2kmax_dwords)
|
|
first = dd->piobcnt2k;
|
|
else
|
|
first = 0;
|
|
/* try 4k if all 2k busy, so same last for both sizes */
|
|
last = dd->piobcnt2k + dd->piobcnt4k - 1;
|
|
buf = qib_getsendbuf_range(dd, pbufnum, first, last);
|
|
}
|
|
return buf;
|
|
}
|
|
|
|
static int init_sdma_6120_regs(struct qib_pportdata *ppd)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static u16 qib_sdma_6120_gethead(struct qib_pportdata *ppd)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int qib_sdma_6120_busy(struct qib_pportdata *ppd)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void qib_sdma_update_6120_tail(struct qib_pportdata *ppd, u16 tail)
|
|
{
|
|
}
|
|
|
|
static void qib_6120_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op)
|
|
{
|
|
}
|
|
|
|
static void qib_sdma_set_6120_desc_cnt(struct qib_pportdata *ppd, unsigned cnt)
|
|
{
|
|
}
|
|
|
|
/*
|
|
* the pbc doesn't need a VL15 indicator, but we need it for link_buf.
|
|
* The chip ignores the bit if set.
|
|
*/
|
|
static u32 qib_6120_setpbc_control(struct qib_pportdata *ppd, u32 plen,
|
|
u8 srate, u8 vl)
|
|
{
|
|
return vl == 15 ? PBC_6120_VL15_SEND_CTRL : 0;
|
|
}
|
|
|
|
static void qib_6120_initvl15_bufs(struct qib_devdata *dd)
|
|
{
|
|
}
|
|
|
|
static void qib_6120_init_ctxt(struct qib_ctxtdata *rcd)
|
|
{
|
|
rcd->rcvegrcnt = rcd->dd->rcvhdrcnt;
|
|
rcd->rcvegr_tid_base = rcd->ctxt * rcd->rcvegrcnt;
|
|
}
|
|
|
|
static void qib_6120_txchk_change(struct qib_devdata *dd, u32 start,
|
|
u32 len, u32 avail, struct qib_ctxtdata *rcd)
|
|
{
|
|
}
|
|
|
|
static void writescratch(struct qib_devdata *dd, u32 val)
|
|
{
|
|
(void) qib_write_kreg(dd, kr_scratch, val);
|
|
}
|
|
|
|
static int qib_6120_tempsense_rd(struct qib_devdata *dd, int regnum)
|
|
{
|
|
return -ENXIO;
|
|
}
|
|
|
|
#ifdef CONFIG_INFINIBAND_QIB_DCA
|
|
static int qib_6120_notify_dca(struct qib_devdata *dd, unsigned long event)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* Dummy function, as 6120 boards never disable EEPROM Write */
|
|
static int qib_6120_eeprom_wen(struct qib_devdata *dd, int wen)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* qib_init_iba6120_funcs - set up the chip-specific function pointers
|
|
* @pdev: pci_dev of the qlogic_ib device
|
|
* @ent: pci_device_id matching this chip
|
|
*
|
|
* This is global, and is called directly at init to set up the
|
|
* chip-specific function pointers for later use.
|
|
*
|
|
* It also allocates/partially-inits the qib_devdata struct for
|
|
* this device.
|
|
*/
|
|
struct qib_devdata *qib_init_iba6120_funcs(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
struct qib_devdata *dd;
|
|
int ret;
|
|
|
|
dd = qib_alloc_devdata(pdev, sizeof(struct qib_pportdata) +
|
|
sizeof(struct qib_chip_specific));
|
|
if (IS_ERR(dd))
|
|
goto bail;
|
|
|
|
dd->f_bringup_serdes = qib_6120_bringup_serdes;
|
|
dd->f_cleanup = qib_6120_setup_cleanup;
|
|
dd->f_clear_tids = qib_6120_clear_tids;
|
|
dd->f_free_irq = qib_6120_free_irq;
|
|
dd->f_get_base_info = qib_6120_get_base_info;
|
|
dd->f_get_msgheader = qib_6120_get_msgheader;
|
|
dd->f_getsendbuf = qib_6120_getsendbuf;
|
|
dd->f_gpio_mod = gpio_6120_mod;
|
|
dd->f_eeprom_wen = qib_6120_eeprom_wen;
|
|
dd->f_hdrqempty = qib_6120_hdrqempty;
|
|
dd->f_ib_updown = qib_6120_ib_updown;
|
|
dd->f_init_ctxt = qib_6120_init_ctxt;
|
|
dd->f_initvl15_bufs = qib_6120_initvl15_bufs;
|
|
dd->f_intr_fallback = qib_6120_nointr_fallback;
|
|
dd->f_late_initreg = qib_late_6120_initreg;
|
|
dd->f_setpbc_control = qib_6120_setpbc_control;
|
|
dd->f_portcntr = qib_portcntr_6120;
|
|
dd->f_put_tid = (dd->minrev >= 2) ?
|
|
qib_6120_put_tid_2 :
|
|
qib_6120_put_tid;
|
|
dd->f_quiet_serdes = qib_6120_quiet_serdes;
|
|
dd->f_rcvctrl = rcvctrl_6120_mod;
|
|
dd->f_read_cntrs = qib_read_6120cntrs;
|
|
dd->f_read_portcntrs = qib_read_6120portcntrs;
|
|
dd->f_reset = qib_6120_setup_reset;
|
|
dd->f_init_sdma_regs = init_sdma_6120_regs;
|
|
dd->f_sdma_busy = qib_sdma_6120_busy;
|
|
dd->f_sdma_gethead = qib_sdma_6120_gethead;
|
|
dd->f_sdma_sendctrl = qib_6120_sdma_sendctrl;
|
|
dd->f_sdma_set_desc_cnt = qib_sdma_set_6120_desc_cnt;
|
|
dd->f_sdma_update_tail = qib_sdma_update_6120_tail;
|
|
dd->f_sendctrl = sendctrl_6120_mod;
|
|
dd->f_set_armlaunch = qib_set_6120_armlaunch;
|
|
dd->f_set_cntr_sample = qib_set_cntr_6120_sample;
|
|
dd->f_iblink_state = qib_6120_iblink_state;
|
|
dd->f_ibphys_portstate = qib_6120_phys_portstate;
|
|
dd->f_get_ib_cfg = qib_6120_get_ib_cfg;
|
|
dd->f_set_ib_cfg = qib_6120_set_ib_cfg;
|
|
dd->f_set_ib_loopback = qib_6120_set_loopback;
|
|
dd->f_set_intr_state = qib_6120_set_intr_state;
|
|
dd->f_setextled = qib_6120_setup_setextled;
|
|
dd->f_txchk_change = qib_6120_txchk_change;
|
|
dd->f_update_usrhead = qib_update_6120_usrhead;
|
|
dd->f_wantpiobuf_intr = qib_wantpiobuf_6120_intr;
|
|
dd->f_xgxs_reset = qib_6120_xgxs_reset;
|
|
dd->f_writescratch = writescratch;
|
|
dd->f_tempsense_rd = qib_6120_tempsense_rd;
|
|
#ifdef CONFIG_INFINIBAND_QIB_DCA
|
|
dd->f_notify_dca = qib_6120_notify_dca;
|
|
#endif
|
|
/*
|
|
* Do remaining pcie setup and save pcie values in dd.
|
|
* Any error printing is already done by the init code.
|
|
* On return, we have the chip mapped and accessible,
|
|
* but chip registers are not set up until start of
|
|
* init_6120_variables.
|
|
*/
|
|
ret = qib_pcie_ddinit(dd, pdev, ent);
|
|
if (ret < 0)
|
|
goto bail_free;
|
|
|
|
/* initialize chip-specific variables */
|
|
ret = init_6120_variables(dd);
|
|
if (ret)
|
|
goto bail_cleanup;
|
|
|
|
if (qib_mini_init)
|
|
goto bail;
|
|
|
|
if (qib_pcie_params(dd, 8, NULL, NULL))
|
|
qib_dev_err(dd,
|
|
"Failed to setup PCIe or interrupts; continuing anyway\n");
|
|
dd->cspec->irq = pdev->irq; /* save IRQ */
|
|
|
|
/* clear diagctrl register, in case diags were running and crashed */
|
|
qib_write_kreg(dd, kr_hwdiagctrl, 0);
|
|
|
|
if (qib_read_kreg64(dd, kr_hwerrstatus) &
|
|
QLOGIC_IB_HWE_SERDESPLLFAILED)
|
|
qib_write_kreg(dd, kr_hwerrclear,
|
|
QLOGIC_IB_HWE_SERDESPLLFAILED);
|
|
|
|
/* setup interrupt handler (interrupt type handled above) */
|
|
qib_setup_6120_interrupt(dd);
|
|
/* Note that qpn_mask is set by qib_6120_config_ctxts() first */
|
|
qib_6120_init_hwerrors(dd);
|
|
|
|
goto bail;
|
|
|
|
bail_cleanup:
|
|
qib_pcie_ddcleanup(dd);
|
|
bail_free:
|
|
qib_free_devdata(dd);
|
|
dd = ERR_PTR(ret);
|
|
bail:
|
|
return dd;
|
|
}
|