WSL2-Linux-Kernel/arch/alpha/kernel/core_polaris.c

203 строки
4.4 KiB
C
Исходник Ответственный История

Этот файл содержит невидимые символы Юникода!

Этот файл содержит невидимые символы Юникода, которые могут быть отображены не так, как показано ниже. Если это намеренно, можете спокойно проигнорировать это предупреждение. Используйте кнопку Экранировать, чтобы показать скрытые символы.

/*
* linux/arch/alpha/kernel/core_polaris.c
*
* POLARIS chip-specific code
*/
#define __EXTERN_INLINE inline
#include <asm/io.h>
#include <asm/core_polaris.h>
#undef __EXTERN_INLINE
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#include "proto.h"
#include "pci_impl.h"
/*
* BIOS32-style PCI interface:
*/
#define DEBUG_CONFIG 0
#if DEBUG_CONFIG
# define DBG_CFG(args) printk args
#else
# define DBG_CFG(args)
#endif
/*
* Given a bus, device, and function number, compute resulting
* configuration space address. This is fairly straightforward
* on POLARIS, since the chip itself generates Type 0 or Type 1
* cycles automatically depending on the bus number (Bus 0 is
* hardwired to Type 0, all others are Type 1. Peer bridges
* are not supported).
*
* All types:
*
* 3 3 3 3|3 3 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1
* 9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
* |1|1|1|1|1|0|0|1|1|1|1|1|1|1|1|0|B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|x|x|
* +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
*
* 23:16 bus number (8 bits = 128 possible buses)
* 15:11 Device number (5 bits)
* 10:8 function number
* 7:2 register number
*
* Notes:
* The function number selects which function of a multi-function device
* (e.g., scsi and ethernet).
*
* The register selects a DWORD (32 bit) register offset. Hence it
* doesn't get shifted by 2 bits as we want to "drop" the bottom two
* bits.
*/
static int
mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where,
unsigned long *pci_addr, u8 *type1)
{
u8 bus = pbus->number;
*type1 = (bus == 0) ? 0 : 1;
*pci_addr = (bus << 16) | (device_fn << 8) | (where) |
POLARIS_DENSE_CONFIG_BASE;
DBG_CFG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x,"
" returning address 0x%p\n"
bus, device_fn, where, *pci_addr));
return 0;
}
static int
polaris_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *value)
{
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
*value = __kernel_ldbu(*(vucp)addr);
break;
case 2:
*value = __kernel_ldwu(*(vusp)addr);
break;
case 4:
*value = *(vuip)addr;
break;
}
return PCIBIOS_SUCCESSFUL;
}
static int
polaris_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 value)
{
unsigned long addr;
unsigned char type1;
if (mk_conf_addr(bus, devfn, where, &addr, &type1))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1:
__kernel_stb(value, *(vucp)addr);
mb();
__kernel_ldbu(*(vucp)addr);
break;
case 2:
__kernel_stw(value, *(vusp)addr);
mb();
__kernel_ldwu(*(vusp)addr);
break;
case 4:
*(vuip)addr = value;
mb();
*(vuip)addr;
break;
}
return PCIBIOS_SUCCESSFUL;
}
struct pci_ops polaris_pci_ops =
{
.read = polaris_read_config,
.write = polaris_write_config,
};
void __init
polaris_init_arch(void)
{
struct pci_controller *hose;
/* May need to initialize error reporting (see PCICTL0/1), but
* for now assume that the firmware has done the right thing
* already.
*/
#if 0
printk("polaris_init_arch(): trusting firmware for setup\n");
#endif
/*
* Create our single hose.
*/
pci_isa_hose = hose = alloc_pci_controller();
hose->io_space = &ioport_resource;
hose->mem_space = &iomem_resource;
hose->index = 0;
hose->sparse_mem_base = 0;
hose->dense_mem_base = POLARIS_DENSE_MEM_BASE - IDENT_ADDR;
hose->sparse_io_base = 0;
hose->dense_io_base = POLARIS_DENSE_IO_BASE - IDENT_ADDR;
hose->sg_isa = hose->sg_pci = NULL;
/* The I/O window is fixed at 2G @ 2G. */
__direct_map_base = 0x80000000;
__direct_map_size = 0x80000000;
}
static inline void
polaris_pci_clr_err(void)
{
*(vusp)POLARIS_W_STATUS;
/* Write 1's to settable bits to clear errors */
*(vusp)POLARIS_W_STATUS = 0x7800;
mb();
*(vusp)POLARIS_W_STATUS;
}
void
polaris_machine_check(unsigned long vector, unsigned long la_ptr)
{
/* Clear the error before any reporting. */
mb();
mb();
draina();
polaris_pci_clr_err();
wrmces(0x7);
mb();
process_mcheck_info(vector, la_ptr, "POLARIS",
mcheck_expected(0));
}