209 строки
6.1 KiB
YAML
209 строки
6.1 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/net/ethernet-phy.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Ethernet PHY Generic Binding
|
|
|
|
maintainers:
|
|
- Andrew Lunn <andrew@lunn.ch>
|
|
- Florian Fainelli <f.fainelli@gmail.com>
|
|
- Heiner Kallweit <hkallweit1@gmail.com>
|
|
|
|
# The dt-schema tools will generate a select statement first by using
|
|
# the compatible, and second by using the node name if any. In our
|
|
# case, the node name is the one we want to match on, while the
|
|
# compatible is optional.
|
|
select:
|
|
properties:
|
|
$nodename:
|
|
pattern: "^ethernet-phy(@[a-f0-9]+)?$"
|
|
|
|
required:
|
|
- $nodename
|
|
|
|
properties:
|
|
$nodename:
|
|
pattern: "^ethernet-phy(@[a-f0-9]+)?$"
|
|
|
|
compatible:
|
|
oneOf:
|
|
- const: ethernet-phy-ieee802.3-c22
|
|
description: PHYs that implement IEEE802.3 clause 22
|
|
- const: ethernet-phy-ieee802.3-c45
|
|
description: PHYs that implement IEEE802.3 clause 45
|
|
- pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
|
|
description:
|
|
If the PHY reports an incorrect ID (or none at all) then the
|
|
compatible list may contain an entry with the correct PHY ID
|
|
in the above form.
|
|
The first group of digits is the 16 bit Phy Identifier 1
|
|
register, this is the chip vendor OUI bits 3:18. The
|
|
second group of digits is the Phy Identifier 2 register,
|
|
this is the chip vendor OUI bits 19:24, followed by 10
|
|
bits of a vendor specific ID.
|
|
- items:
|
|
- pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
|
|
- const: ethernet-phy-ieee802.3-c22
|
|
- items:
|
|
- pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
|
|
- const: ethernet-phy-ieee802.3-c45
|
|
|
|
reg:
|
|
minimum: 0
|
|
maximum: 31
|
|
description:
|
|
The ID number for the PHY.
|
|
|
|
interrupts:
|
|
maxItems: 1
|
|
|
|
max-speed:
|
|
enum:
|
|
- 10
|
|
- 100
|
|
- 1000
|
|
- 2500
|
|
- 5000
|
|
- 10000
|
|
- 20000
|
|
- 25000
|
|
- 40000
|
|
- 50000
|
|
- 56000
|
|
- 100000
|
|
- 200000
|
|
description:
|
|
Maximum PHY supported speed in Mbits / seconds.
|
|
|
|
broken-turn-around:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
If set, indicates the PHY device does not correctly release
|
|
the turn around line low at end of the control phase of the
|
|
MDIO transaction.
|
|
|
|
enet-phy-lane-swap:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
If set, indicates the PHY will swap the TX/RX lanes to
|
|
compensate for the board being designed with the lanes
|
|
swapped.
|
|
|
|
enet-phy-lane-no-swap:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
If set, indicates that PHY will disable swap of the
|
|
TX/RX lanes. This property allows the PHY to work correcly after
|
|
e.g. wrong bootstrap configuration caused by issues in PCB
|
|
layout design.
|
|
|
|
eee-broken-100tx:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Mark the corresponding energy efficient ethernet mode as
|
|
broken and request the ethernet to stop advertising it.
|
|
|
|
eee-broken-1000t:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Mark the corresponding energy efficient ethernet mode as
|
|
broken and request the ethernet to stop advertising it.
|
|
|
|
eee-broken-10gt:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Mark the corresponding energy efficient ethernet mode as
|
|
broken and request the ethernet to stop advertising it.
|
|
|
|
eee-broken-1000kx:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Mark the corresponding energy efficient ethernet mode as
|
|
broken and request the ethernet to stop advertising it.
|
|
|
|
eee-broken-10gkx4:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Mark the corresponding energy efficient ethernet mode as
|
|
broken and request the ethernet to stop advertising it.
|
|
|
|
eee-broken-10gkr:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
Mark the corresponding energy efficient ethernet mode as
|
|
broken and request the ethernet to stop advertising it.
|
|
|
|
phy-is-integrated:
|
|
$ref: /schemas/types.yaml#/definitions/flag
|
|
description:
|
|
If set, indicates that the PHY is integrated into the same
|
|
physical package as the Ethernet MAC. If needed, muxers
|
|
should be configured to ensure the integrated PHY is
|
|
used. The absence of this property indicates the muxers
|
|
should be configured so that the external PHY is used.
|
|
|
|
resets:
|
|
maxItems: 1
|
|
|
|
reset-names:
|
|
const: phy
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description:
|
|
The GPIO phandle and specifier for the PHY reset signal.
|
|
|
|
reset-assert-us:
|
|
description:
|
|
Delay after the reset was asserted in microseconds. If this
|
|
property is missing the delay will be skipped.
|
|
|
|
reset-deassert-us:
|
|
description:
|
|
Delay after the reset was deasserted in microseconds. If
|
|
this property is missing the delay will be skipped.
|
|
|
|
sfp:
|
|
$ref: /schemas/types.yaml#/definitions/phandle
|
|
description:
|
|
Specifies a reference to a node representing a SFP cage.
|
|
|
|
rx-internal-delay-ps:
|
|
description: |
|
|
RGMII Receive PHY Clock Delay defined in pico seconds. This is used for
|
|
PHY's that have configurable RX internal delays. If this property is
|
|
present then the PHY applies the RX delay.
|
|
|
|
tx-internal-delay-ps:
|
|
description: |
|
|
RGMII Transmit PHY Clock Delay defined in pico seconds. This is used for
|
|
PHY's that have configurable TX internal delays. If this property is
|
|
present then the PHY applies the TX delay.
|
|
|
|
required:
|
|
- reg
|
|
|
|
additionalProperties: true
|
|
|
|
examples:
|
|
- |
|
|
ethernet {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethernet-phy@0 {
|
|
compatible = "ethernet-phy-id0141.0e90", "ethernet-phy-ieee802.3-c45";
|
|
interrupt-parent = <&PIC>;
|
|
interrupts = <35 1>;
|
|
reg = <0>;
|
|
|
|
resets = <&rst 8>;
|
|
reset-names = "phy";
|
|
reset-gpios = <&gpio1 4 1>;
|
|
reset-assert-us = <1000>;
|
|
reset-deassert-us = <2000>;
|
|
};
|
|
};
|