microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/power/supply/bq24190_charger.c

2073 строки
55 KiB
C
Исходник Ответственный История

// SPDX-License-Identifier: GPL-2.0-only
/*
* Driver for the TI bq24190 battery charger.
*
* Author: Mark A. Greer <mgreer@animalcreek.com>
*/
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
#include <linux/power_supply.h>
#include <linux/power/bq24190_charger.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/workqueue.h>
#include <linux/i2c.h>
#include <linux/extcon-provider.h>
#define BQ24190_MANUFACTURER "Texas Instruments"
#define BQ24190_REG_ISC 0x00 /* Input Source Control */
#define BQ24190_REG_ISC_EN_HIZ_MASK BIT(7)
#define BQ24190_REG_ISC_EN_HIZ_SHIFT 7
#define BQ24190_REG_ISC_VINDPM_MASK (BIT(6) | BIT(5) | BIT(4) | \
BIT(3))
#define BQ24190_REG_ISC_VINDPM_SHIFT 3
#define BQ24190_REG_ISC_IINLIM_MASK (BIT(2) | BIT(1) | BIT(0))
#define BQ24190_REG_ISC_IINLIM_SHIFT 0
#define BQ24190_REG_POC 0x01 /* Power-On Configuration */
#define BQ24190_REG_POC_RESET_MASK BIT(7)
#define BQ24190_REG_POC_RESET_SHIFT 7
#define BQ24190_REG_POC_WDT_RESET_MASK BIT(6)
#define BQ24190_REG_POC_WDT_RESET_SHIFT 6
#define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4))
#define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4
#define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0
#define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1
#define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2
#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT 0x3
#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1))
#define BQ24190_REG_POC_SYS_MIN_SHIFT 1
#define BQ24190_REG_POC_SYS_MIN_MIN 3000
#define BQ24190_REG_POC_SYS_MIN_MAX 3700
#define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0)
#define BQ24190_REG_POC_BOOST_LIM_SHIFT 0
#define BQ24190_REG_CCC 0x02 /* Charge Current Control */
#define BQ24190_REG_CCC_ICHG_MASK (BIT(7) | BIT(6) | BIT(5) | \
BIT(4) | BIT(3) | BIT(2))
#define BQ24190_REG_CCC_ICHG_SHIFT 2
#define BQ24190_REG_CCC_FORCE_20PCT_MASK BIT(0)
#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT 0
#define BQ24190_REG_PCTCC 0x03 /* Pre-charge/Termination Current Cntl */
#define BQ24190_REG_PCTCC_IPRECHG_MASK (BIT(7) | BIT(6) | BIT(5) | \
BIT(4))
#define BQ24190_REG_PCTCC_IPRECHG_SHIFT 4
#define BQ24190_REG_PCTCC_IPRECHG_MIN 128
#define BQ24190_REG_PCTCC_IPRECHG_MAX 2048
#define BQ24190_REG_PCTCC_ITERM_MASK (BIT(3) | BIT(2) | BIT(1) | \
BIT(0))
#define BQ24190_REG_PCTCC_ITERM_SHIFT 0
#define BQ24190_REG_PCTCC_ITERM_MIN 128
#define BQ24190_REG_PCTCC_ITERM_MAX 2048
#define BQ24190_REG_CVC 0x04 /* Charge Voltage Control */
#define BQ24190_REG_CVC_VREG_MASK (BIT(7) | BIT(6) | BIT(5) | \
BIT(4) | BIT(3) | BIT(2))
#define BQ24190_REG_CVC_VREG_SHIFT 2
#define BQ24190_REG_CVC_BATLOWV_MASK BIT(1)
#define BQ24190_REG_CVC_BATLOWV_SHIFT 1
#define BQ24190_REG_CVC_VRECHG_MASK BIT(0)
#define BQ24190_REG_CVC_VRECHG_SHIFT 0
#define BQ24190_REG_CTTC 0x05 /* Charge Term/Timer Control */
#define BQ24190_REG_CTTC_EN_TERM_MASK BIT(7)
#define BQ24190_REG_CTTC_EN_TERM_SHIFT 7
#define BQ24190_REG_CTTC_TERM_STAT_MASK BIT(6)
#define BQ24190_REG_CTTC_TERM_STAT_SHIFT 6
#define BQ24190_REG_CTTC_WATCHDOG_MASK (BIT(5) | BIT(4))
#define BQ24190_REG_CTTC_WATCHDOG_SHIFT 4
#define BQ24190_REG_CTTC_EN_TIMER_MASK BIT(3)
#define BQ24190_REG_CTTC_EN_TIMER_SHIFT 3
#define BQ24190_REG_CTTC_CHG_TIMER_MASK (BIT(2) | BIT(1))
#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT 1
#define BQ24190_REG_CTTC_JEITA_ISET_MASK BIT(0)
#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT 0
#define BQ24190_REG_ICTRC 0x06 /* IR Comp/Thermal Regulation Control */
#define BQ24190_REG_ICTRC_BAT_COMP_MASK (BIT(7) | BIT(6) | BIT(5))
#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT 5
#define BQ24190_REG_ICTRC_VCLAMP_MASK (BIT(4) | BIT(3) | BIT(2))
#define BQ24190_REG_ICTRC_VCLAMP_SHIFT 2
#define BQ24190_REG_ICTRC_TREG_MASK (BIT(1) | BIT(0))
#define BQ24190_REG_ICTRC_TREG_SHIFT 0
#define BQ24190_REG_MOC 0x07 /* Misc. Operation Control */
#define BQ24190_REG_MOC_DPDM_EN_MASK BIT(7)
#define BQ24190_REG_MOC_DPDM_EN_SHIFT 7
#define BQ24190_REG_MOC_TMR2X_EN_MASK BIT(6)
#define BQ24190_REG_MOC_TMR2X_EN_SHIFT 6
#define BQ24190_REG_MOC_BATFET_DISABLE_MASK BIT(5)
#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT 5
#define BQ24190_REG_MOC_JEITA_VSET_MASK BIT(4)
#define BQ24190_REG_MOC_JEITA_VSET_SHIFT 4
#define BQ24190_REG_MOC_INT_MASK_MASK (BIT(1) | BIT(0))
#define BQ24190_REG_MOC_INT_MASK_SHIFT 0
#define BQ24190_REG_SS 0x08 /* System Status */
#define BQ24190_REG_SS_VBUS_STAT_MASK (BIT(7) | BIT(6))
#define BQ24190_REG_SS_VBUS_STAT_SHIFT 6
#define BQ24190_REG_SS_CHRG_STAT_MASK (BIT(5) | BIT(4))
#define BQ24190_REG_SS_CHRG_STAT_SHIFT 4
#define BQ24190_REG_SS_DPM_STAT_MASK BIT(3)
#define BQ24190_REG_SS_DPM_STAT_SHIFT 3
#define BQ24190_REG_SS_PG_STAT_MASK BIT(2)
#define BQ24190_REG_SS_PG_STAT_SHIFT 2
#define BQ24190_REG_SS_THERM_STAT_MASK BIT(1)
#define BQ24190_REG_SS_THERM_STAT_SHIFT 1
#define BQ24190_REG_SS_VSYS_STAT_MASK BIT(0)
#define BQ24190_REG_SS_VSYS_STAT_SHIFT 0
#define BQ24190_REG_F 0x09 /* Fault */
#define BQ24190_REG_F_WATCHDOG_FAULT_MASK BIT(7)
#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT 7
#define BQ24190_REG_F_BOOST_FAULT_MASK BIT(6)
#define BQ24190_REG_F_BOOST_FAULT_SHIFT 6
#define BQ24190_REG_F_CHRG_FAULT_MASK (BIT(5) | BIT(4))
#define BQ24190_REG_F_CHRG_FAULT_SHIFT 4
#define BQ24190_REG_F_BAT_FAULT_MASK BIT(3)
#define BQ24190_REG_F_BAT_FAULT_SHIFT 3
#define BQ24190_REG_F_NTC_FAULT_MASK (BIT(2) | BIT(1) | BIT(0))
#define BQ24190_REG_F_NTC_FAULT_SHIFT 0
#define BQ24190_REG_VPRS 0x0A /* Vendor/Part/Revision Status */
#define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3))
#define BQ24190_REG_VPRS_PN_SHIFT 3
#define BQ24190_REG_VPRS_PN_24190 0x4
#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193, 24196 */
#define BQ24190_REG_VPRS_PN_24192I 0x3
#define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2)
#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2
#define BQ24190_REG_VPRS_DEV_REG_MASK (BIT(1) | BIT(0))
#define BQ24190_REG_VPRS_DEV_REG_SHIFT 0
/*
* The FAULT register is latched by the bq24190 (except for NTC_FAULT)
* so the first read after a fault returns the latched value and subsequent
* reads return the current value. In order to return the fault status
* to the user, have the interrupt handler save the reg's value and retrieve
* it in the appropriate health/status routine.
*/
struct bq24190_dev_info {
struct i2c_client *client;
struct device *dev;
struct extcon_dev *edev;
struct power_supply *charger;
struct power_supply *battery;
struct delayed_work input_current_limit_work;
char model_name[I2C_NAME_SIZE];
bool initialized;
bool irq_event;
bool otg_vbus_enabled;
int charge_type;
u16 sys_min;
u16 iprechg;
u16 iterm;
u32 ichg;
u32 ichg_max;
u32 vreg;
u32 vreg_max;
struct mutex f_reg_lock;
u8 f_reg;
u8 ss_reg;
u8 watchdog;
};
static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi,
const union power_supply_propval *val);
static const unsigned int bq24190_usb_extcon_cable[] = {
EXTCON_USB,
EXTCON_NONE,
};
/*
* The tables below provide a 2-way mapping for the value that goes in
* the register field and the real-world value that it represents.
* The index of the array is the value that goes in the register; the
* number at that index in the array is the real-world value that it
* represents.
*/
/* REG00[2:0] (IINLIM) in uAh */
static const int bq24190_isc_iinlim_values[] = {
100000, 150000, 500000, 900000, 1200000, 1500000, 2000000, 3000000
};
/* REG02[7:2] (ICHG) in uAh */
static const int bq24190_ccc_ichg_values[] = {
512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000,
1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000,
1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000,
2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000,
2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000,
3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000,
3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000,
4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000
};
/* REG04[7:2] (VREG) in uV */
static const int bq24190_cvc_vreg_values[] = {
3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000,
3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000,
3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000,
3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000,
4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000,
4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000,
4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000,
4400000
};
/* REG06[1:0] (TREG) in tenths of degrees Celsius */
static const int bq24190_ictrc_treg_values[] = {
600, 800, 1000, 1200
};
/*
* Return the index in 'tbl' of greatest value that is less than or equal to
* 'val'. The index range returned is 0 to 'tbl_size' - 1. Assumes that
* the values in 'tbl' are sorted from smallest to largest and 'tbl_size'
* is less than 2^8.
*/
static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v)
{
int i;
for (i = 1; i < tbl_size; i++)
if (v < tbl[i])
break;
return i - 1;
}
/* Basic driver I/O routines */
static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data)
{
int ret;
ret = i2c_smbus_read_byte_data(bdi->client, reg);
if (ret < 0)
return ret;
*data = ret;
return 0;
}
static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data)
{
return i2c_smbus_write_byte_data(bdi->client, reg, data);
}
static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg,
u8 mask, u8 shift, u8 *data)
{
u8 v;
int ret;
ret = bq24190_read(bdi, reg, &v);
if (ret < 0)
return ret;
v &= mask;
v >>= shift;
*data = v;
return 0;
}
static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg,
u8 mask, u8 shift, u8 data)
{
u8 v;
int ret;
ret = bq24190_read(bdi, reg, &v);
if (ret < 0)
return ret;
v &= ~mask;
v |= ((data << shift) & mask);
return bq24190_write(bdi, reg, v);
}
static int bq24190_get_field_val(struct bq24190_dev_info *bdi,
u8 reg, u8 mask, u8 shift,
const int tbl[], int tbl_size,
int *val)
{
u8 v;
int ret;
ret = bq24190_read_mask(bdi, reg, mask, shift, &v);
if (ret < 0)
return ret;
v = (v >= tbl_size) ? (tbl_size - 1) : v;
*val = tbl[v];
return 0;
}
static int bq24190_set_field_val(struct bq24190_dev_info *bdi,
u8 reg, u8 mask, u8 shift,
const int tbl[], int tbl_size,
int val)
{
u8 idx;
idx = bq24190_find_idx(tbl, tbl_size, val);
return bq24190_write_mask(bdi, reg, mask, shift, idx);
}
#ifdef CONFIG_SYSFS
/*
* There are a numerous options that are configurable on the bq24190
* that go well beyond what the power_supply properties provide access to.
* Provide sysfs access to them so they can be examined and possibly modified
* on the fly. They will be provided for the charger power_supply object only
* and will be prefixed by 'f_' to make them easier to recognize.
*/
#define BQ24190_SYSFS_FIELD(_name, r, f, m, store) \
{ \
.attr = __ATTR(f_##_name, m, bq24190_sysfs_show, store), \
.reg = BQ24190_REG_##r, \
.mask = BQ24190_REG_##r##_##f##_MASK, \
.shift = BQ24190_REG_##r##_##f##_SHIFT, \
}
#define BQ24190_SYSFS_FIELD_RW(_name, r, f) \
BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO, \
bq24190_sysfs_store)
#define BQ24190_SYSFS_FIELD_RO(_name, r, f) \
BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL)
static ssize_t bq24190_sysfs_show(struct device *dev,
struct device_attribute *attr, char *buf);
static ssize_t bq24190_sysfs_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count);
struct bq24190_sysfs_field_info {
struct device_attribute attr;
u8 reg;
u8 mask;
u8 shift;
};
/* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */
#undef SS
static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = {
/* sysfs name reg field in reg */
BQ24190_SYSFS_FIELD_RW(en_hiz, ISC, EN_HIZ),
BQ24190_SYSFS_FIELD_RW(vindpm, ISC, VINDPM),
BQ24190_SYSFS_FIELD_RW(iinlim, ISC, IINLIM),
BQ24190_SYSFS_FIELD_RW(chg_config, POC, CHG_CONFIG),
BQ24190_SYSFS_FIELD_RW(sys_min, POC, SYS_MIN),
BQ24190_SYSFS_FIELD_RW(boost_lim, POC, BOOST_LIM),
BQ24190_SYSFS_FIELD_RW(ichg, CCC, ICHG),
BQ24190_SYSFS_FIELD_RW(force_20_pct, CCC, FORCE_20PCT),
BQ24190_SYSFS_FIELD_RW(iprechg, PCTCC, IPRECHG),
BQ24190_SYSFS_FIELD_RW(iterm, PCTCC, ITERM),
BQ24190_SYSFS_FIELD_RW(vreg, CVC, VREG),
BQ24190_SYSFS_FIELD_RW(batlowv, CVC, BATLOWV),
BQ24190_SYSFS_FIELD_RW(vrechg, CVC, VRECHG),
BQ24190_SYSFS_FIELD_RW(en_term, CTTC, EN_TERM),
BQ24190_SYSFS_FIELD_RW(term_stat, CTTC, TERM_STAT),
BQ24190_SYSFS_FIELD_RO(watchdog, CTTC, WATCHDOG),
BQ24190_SYSFS_FIELD_RW(en_timer, CTTC, EN_TIMER),
BQ24190_SYSFS_FIELD_RW(chg_timer, CTTC, CHG_TIMER),
BQ24190_SYSFS_FIELD_RW(jeta_iset, CTTC, JEITA_ISET),
BQ24190_SYSFS_FIELD_RW(bat_comp, ICTRC, BAT_COMP),
BQ24190_SYSFS_FIELD_RW(vclamp, ICTRC, VCLAMP),
BQ24190_SYSFS_FIELD_RW(treg, ICTRC, TREG),
BQ24190_SYSFS_FIELD_RW(dpdm_en, MOC, DPDM_EN),
BQ24190_SYSFS_FIELD_RW(tmr2x_en, MOC, TMR2X_EN),
BQ24190_SYSFS_FIELD_RW(batfet_disable, MOC, BATFET_DISABLE),
BQ24190_SYSFS_FIELD_RW(jeita_vset, MOC, JEITA_VSET),
BQ24190_SYSFS_FIELD_RO(int_mask, MOC, INT_MASK),
BQ24190_SYSFS_FIELD_RO(vbus_stat, SS, VBUS_STAT),
BQ24190_SYSFS_FIELD_RO(chrg_stat, SS, CHRG_STAT),
BQ24190_SYSFS_FIELD_RO(dpm_stat, SS, DPM_STAT),
BQ24190_SYSFS_FIELD_RO(pg_stat, SS, PG_STAT),
BQ24190_SYSFS_FIELD_RO(therm_stat, SS, THERM_STAT),
BQ24190_SYSFS_FIELD_RO(vsys_stat, SS, VSYS_STAT),
BQ24190_SYSFS_FIELD_RO(watchdog_fault, F, WATCHDOG_FAULT),
BQ24190_SYSFS_FIELD_RO(boost_fault, F, BOOST_FAULT),
BQ24190_SYSFS_FIELD_RO(chrg_fault, F, CHRG_FAULT),
BQ24190_SYSFS_FIELD_RO(bat_fault, F, BAT_FAULT),
BQ24190_SYSFS_FIELD_RO(ntc_fault, F, NTC_FAULT),
BQ24190_SYSFS_FIELD_RO(pn, VPRS, PN),
BQ24190_SYSFS_FIELD_RO(ts_profile, VPRS, TS_PROFILE),
BQ24190_SYSFS_FIELD_RO(dev_reg, VPRS, DEV_REG),
};
static struct attribute *
bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1];
ATTRIBUTE_GROUPS(bq24190_sysfs);
static void bq24190_sysfs_init_attrs(void)
{
int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
for (i = 0; i < limit; i++)
bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr;
bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */
}
static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup(
const char *name)
{
int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
for (i = 0; i < limit; i++)
if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name))
break;
if (i >= limit)
return NULL;
return &bq24190_sysfs_field_tbl[i];
}
static ssize_t bq24190_sysfs_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct power_supply *psy = dev_get_drvdata(dev);
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
struct bq24190_sysfs_field_info *info;
ssize_t count;
int ret;
u8 v;
info = bq24190_sysfs_field_lookup(attr->attr.name);
if (!info)
return -EINVAL;
ret = pm_runtime_get_sync(bdi->dev);
if (ret < 0) {
pm_runtime_put_noidle(bdi->dev);
return ret;
}
ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
if (ret)
count = ret;
else
count = scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
return count;
}
static ssize_t bq24190_sysfs_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct power_supply *psy = dev_get_drvdata(dev);
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
struct bq24190_sysfs_field_info *info;
int ret;
u8 v;
info = bq24190_sysfs_field_lookup(attr->attr.name);
if (!info)
return -EINVAL;
ret = kstrtou8(buf, 0, &v);
if (ret < 0)
return ret;
ret = pm_runtime_get_sync(bdi->dev);
if (ret < 0) {
pm_runtime_put_noidle(bdi->dev);
return ret;
}
ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
if (ret)
count = ret;
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
return count;
}
#endif
static int bq24190_set_otg_vbus(struct bq24190_dev_info *bdi, bool enable)
{
union power_supply_propval val = { .intval = bdi->charge_type };
int ret;
ret = pm_runtime_get_sync(bdi->dev);
if (ret < 0) {
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
pm_runtime_put_noidle(bdi->dev);
return ret;
}
bdi->otg_vbus_enabled = enable;
if (enable)
ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
BQ24190_REG_POC_CHG_CONFIG_MASK,
BQ24190_REG_POC_CHG_CONFIG_SHIFT,
BQ24190_REG_POC_CHG_CONFIG_OTG);
else
ret = bq24190_charger_set_charge_type(bdi, &val);
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
return ret;
}
#ifdef CONFIG_REGULATOR
static int bq24190_vbus_enable(struct regulator_dev *dev)
{
return bq24190_set_otg_vbus(rdev_get_drvdata(dev), true);
}
static int bq24190_vbus_disable(struct regulator_dev *dev)
{
return bq24190_set_otg_vbus(rdev_get_drvdata(dev), false);
}
static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
{
struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
int ret;
u8 val;
ret = pm_runtime_get_sync(bdi->dev);
if (ret < 0) {
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
pm_runtime_put_noidle(bdi->dev);
return ret;
}
ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
BQ24190_REG_POC_CHG_CONFIG_MASK,
BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val);
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
if (ret)
return ret;
bdi->otg_vbus_enabled = (val == BQ24190_REG_POC_CHG_CONFIG_OTG ||
val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT);
return bdi->otg_vbus_enabled;
}
static const struct regulator_ops bq24190_vbus_ops = {
.enable = bq24190_vbus_enable,
.disable = bq24190_vbus_disable,
.is_enabled = bq24190_vbus_is_enabled,
};
static const struct regulator_desc bq24190_vbus_desc = {
.name = "usb_otg_vbus",
.of_match = "usb-otg-vbus",
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.ops = &bq24190_vbus_ops,
.fixed_uV = 5000000,
.n_voltages = 1,
};
static const struct regulator_init_data bq24190_vbus_init_data = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
};
static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
{
struct bq24190_platform_data *pdata = bdi->dev->platform_data;
struct regulator_config cfg = { };
struct regulator_dev *reg;
int ret = 0;
cfg.dev = bdi->dev;
if (pdata && pdata->regulator_init_data)
cfg.init_data = pdata->regulator_init_data;
else
cfg.init_data = &bq24190_vbus_init_data;
cfg.driver_data = bdi;
reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg);
if (IS_ERR(reg)) {
ret = PTR_ERR(reg);
dev_err(bdi->dev, "Can't register regulator: %d\n", ret);
}
return ret;
}
#else
static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
{
return 0;
}
#endif
static int bq24190_set_config(struct bq24190_dev_info *bdi)
{
int ret;
u8 v;
ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v);
if (ret < 0)
return ret;
bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
BQ24190_REG_CTTC_WATCHDOG_SHIFT);
/*
* According to the "Host Mode and default Mode" section of the
* manual, a write to any register causes the bq24190 to switch
* from default mode to host mode. It will switch back to default
* mode after a WDT timeout unless the WDT is turned off as well.
* So, by simply turning off the WDT, we accomplish both with the
* same write.
*/
v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
ret = bq24190_write(bdi, BQ24190_REG_CTTC, v);
if (ret < 0)
return ret;
if (bdi->sys_min) {
v = bdi->sys_min / 100 - 30; // manual section 9.5.1.2, table 9
ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
BQ24190_REG_POC_SYS_MIN_MASK,
BQ24190_REG_POC_SYS_MIN_SHIFT,
v);
if (ret < 0)
return ret;
}
if (bdi->iprechg) {
v = bdi->iprechg / 128 - 1; // manual section 9.5.1.4, table 11
ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
BQ24190_REG_PCTCC_IPRECHG_MASK,
BQ24190_REG_PCTCC_IPRECHG_SHIFT,
v);
if (ret < 0)
return ret;
}
if (bdi->iterm) {
v = bdi->iterm / 128 - 1; // manual section 9.5.1.4, table 11
ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
BQ24190_REG_PCTCC_ITERM_MASK,
BQ24190_REG_PCTCC_ITERM_SHIFT,
v);
if (ret < 0)
return ret;
}
if (bdi->ichg) {
ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC,
BQ24190_REG_CCC_ICHG_MASK,
BQ24190_REG_CCC_ICHG_SHIFT,
bq24190_ccc_ichg_values,
ARRAY_SIZE(bq24190_ccc_ichg_values),
bdi->ichg);
if (ret < 0)
return ret;
}
if (bdi->vreg) {
ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC,
BQ24190_REG_CVC_VREG_MASK,
BQ24190_REG_CVC_VREG_SHIFT,
bq24190_cvc_vreg_values,
ARRAY_SIZE(bq24190_cvc_vreg_values),
bdi->vreg);
if (ret < 0)
return ret;
}
return 0;
}
static int bq24190_register_reset(struct bq24190_dev_info *bdi)
{
int ret, limit = 100;
u8 v;
/*
* This prop. can be passed on device instantiation from platform code:
* struct property_entry pe[] =
* { PROPERTY_ENTRY_BOOL("disable-reset"), ... };
* struct i2c_board_info bi =
* { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
* struct i2c_adapter ad = { ... };
* i2c_add_adapter(&ad);
* i2c_new_client_device(&ad, &bi);
*/
if (device_property_read_bool(bdi->dev, "disable-reset"))
return 0;
/* Reset the registers */
ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
BQ24190_REG_POC_RESET_MASK,
BQ24190_REG_POC_RESET_SHIFT,
0x1);
if (ret < 0)
return ret;
/* Reset bit will be cleared by hardware so poll until it is */
do {
ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
BQ24190_REG_POC_RESET_MASK,
BQ24190_REG_POC_RESET_SHIFT,
&v);
if (ret < 0)
return ret;
if (v == 0)
return 0;
usleep_range(100, 200);
} while (--limit);
return -EIO;
}
/* Charger power supply property routines */
static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 v;
int type, ret;
ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
BQ24190_REG_POC_CHG_CONFIG_MASK,
BQ24190_REG_POC_CHG_CONFIG_SHIFT,
&v);
if (ret < 0)
return ret;
/* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */
if (!v) {
type = POWER_SUPPLY_CHARGE_TYPE_NONE;
} else {
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
BQ24190_REG_CCC_FORCE_20PCT_MASK,
BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
&v);
if (ret < 0)
return ret;
type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE :
POWER_SUPPLY_CHARGE_TYPE_FAST;
}
val->intval = type;
return 0;
}
static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi,
const union power_supply_propval *val)
{
u8 chg_config, force_20pct, en_term;
int ret;
/*
* According to the "Termination when REG02[0] = 1" section of
* the bq24190 manual, the trickle charge could be less than the
* termination current so it recommends turning off the termination
* function.
*
* Note: AFAICT from the datasheet, the user will have to manually
* turn off the charging when in 20% mode. If its not turned off,
* there could be battery damage. So, use this mode at your own risk.
*/
switch (val->intval) {
case POWER_SUPPLY_CHARGE_TYPE_NONE:
chg_config = 0x0;
break;
case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
chg_config = 0x1;
force_20pct = 0x1;
en_term = 0x0;
break;
case POWER_SUPPLY_CHARGE_TYPE_FAST:
chg_config = 0x1;
force_20pct = 0x0;
en_term = 0x1;
break;
default:
return -EINVAL;
}
bdi->charge_type = val->intval;
/*
* If the 5V Vbus boost regulator is enabled delay setting
* the charge-type until its gets disabled.
*/
if (bdi->otg_vbus_enabled)
return 0;
if (chg_config) { /* Enabling the charger */
ret = bq24190_write_mask(bdi, BQ24190_REG_CCC,
BQ24190_REG_CCC_FORCE_20PCT_MASK,
BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
force_20pct);
if (ret < 0)
return ret;
ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC,
BQ24190_REG_CTTC_EN_TERM_MASK,
BQ24190_REG_CTTC_EN_TERM_SHIFT,
en_term);
if (ret < 0)
return ret;
}
return bq24190_write_mask(bdi, BQ24190_REG_POC,
BQ24190_REG_POC_CHG_CONFIG_MASK,
BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config);
}
static int bq24190_charger_get_health(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 v;
int health;
mutex_lock(&bdi->f_reg_lock);
v = bdi->f_reg;
mutex_unlock(&bdi->f_reg_lock);
if (v & BQ24190_REG_F_NTC_FAULT_MASK) {
switch (v >> BQ24190_REG_F_NTC_FAULT_SHIFT & 0x7) {
case 0x1: /* TS1 Cold */
case 0x3: /* TS2 Cold */
case 0x5: /* Both Cold */
health = POWER_SUPPLY_HEALTH_COLD;
break;
case 0x2: /* TS1 Hot */
case 0x4: /* TS2 Hot */
case 0x6: /* Both Hot */
health = POWER_SUPPLY_HEALTH_OVERHEAT;
break;
default:
health = POWER_SUPPLY_HEALTH_UNKNOWN;
}
} else if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
} else if (v & BQ24190_REG_F_CHRG_FAULT_MASK) {
switch (v >> BQ24190_REG_F_CHRG_FAULT_SHIFT & 0x3) {
case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */
/*
* This could be over-voltage or under-voltage
* and there's no way to tell which. Instead
* of looking foolish and returning 'OVERVOLTAGE'
* when its really under-voltage, just return
* 'UNSPEC_FAILURE'.
*/
health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
break;
case 0x2: /* Thermal Shutdown */
health = POWER_SUPPLY_HEALTH_OVERHEAT;
break;
case 0x3: /* Charge Safety Timer Expiration */
health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
break;
default: /* prevent compiler warning */
health = -1;
}
} else if (v & BQ24190_REG_F_BOOST_FAULT_MASK) {
/*
* This could be over-current or over-voltage but there's
* no way to tell which. Return 'OVERVOLTAGE' since there
* isn't an 'OVERCURRENT' value defined that we can return
* even if it was over-current.
*/
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
} else {
health = POWER_SUPPLY_HEALTH_GOOD;
}
val->intval = health;
return 0;
}
static int bq24190_charger_get_online(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 pg_stat, batfet_disable;
int ret;
ret = bq24190_read_mask(bdi, BQ24190_REG_SS,
BQ24190_REG_SS_PG_STAT_MASK,
BQ24190_REG_SS_PG_STAT_SHIFT, &pg_stat);
if (ret < 0)
return ret;
ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
BQ24190_REG_MOC_BATFET_DISABLE_MASK,
BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
if (ret < 0)
return ret;
val->intval = pg_stat && !batfet_disable;
return 0;
}
static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
const union power_supply_propval *val);
static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
union power_supply_propval *val);
static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
union power_supply_propval *val);
static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
const union power_supply_propval *val);
static int bq24190_charger_set_online(struct bq24190_dev_info *bdi,
const union power_supply_propval *val)
{
return bq24190_battery_set_online(bdi, val);
}
static int bq24190_charger_get_status(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
return bq24190_battery_get_status(bdi, val);
}
static int bq24190_charger_get_temp_alert_max(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
return bq24190_battery_get_temp_alert_max(bdi, val);
}
static int bq24190_charger_set_temp_alert_max(struct bq24190_dev_info *bdi,
const union power_supply_propval *val)
{
return bq24190_battery_set_temp_alert_max(bdi, val);
}
static int bq24190_charger_get_precharge(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 v;
int ret;
ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
BQ24190_REG_PCTCC_IPRECHG_MASK,
BQ24190_REG_PCTCC_IPRECHG_SHIFT, &v);
if (ret < 0)
return ret;
val->intval = ++v * 128 * 1000;
return 0;
}
static int bq24190_charger_get_charge_term(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 v;
int ret;
ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
BQ24190_REG_PCTCC_ITERM_MASK,
BQ24190_REG_PCTCC_ITERM_SHIFT, &v);
if (ret < 0)
return ret;
val->intval = ++v * 128 * 1000;
return 0;
}
static int bq24190_charger_get_current(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 v;
int curr, ret;
ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC,
BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
bq24190_ccc_ichg_values,
ARRAY_SIZE(bq24190_ccc_ichg_values), &curr);
if (ret < 0)
return ret;
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
BQ24190_REG_CCC_FORCE_20PCT_MASK,
BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
if (ret < 0)
return ret;
/* If FORCE_20PCT is enabled, then current is 20% of ICHG value */
if (v)
curr /= 5;
val->intval = curr;
return 0;
}
static int bq24190_charger_set_current(struct bq24190_dev_info *bdi,
const union power_supply_propval *val)
{
u8 v;
int ret, curr = val->intval;
ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
BQ24190_REG_CCC_FORCE_20PCT_MASK,
BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
if (ret < 0)
return ret;
/* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */
if (v)
curr *= 5;
if (curr > bdi->ichg_max)
return -EINVAL;
ret = bq24190_set_field_val(bdi, BQ24190_REG_CCC,
BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
bq24190_ccc_ichg_values,
ARRAY_SIZE(bq24190_ccc_ichg_values), curr);
if (ret < 0)
return ret;
bdi->ichg = curr;
return 0;
}
static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
int voltage, ret;
ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC,
BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
bq24190_cvc_vreg_values,
ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage);
if (ret < 0)
return ret;
val->intval = voltage;
return 0;
}
static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
const union power_supply_propval *val)
{
int ret;
if (val->intval > bdi->vreg_max)
return -EINVAL;
ret = bq24190_set_field_val(bdi, BQ24190_REG_CVC,
BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
bq24190_cvc_vreg_values,
ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
if (ret < 0)
return ret;
bdi->vreg = val->intval;
return 0;
}
static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
int iinlimit, ret;
ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC,
BQ24190_REG_ISC_IINLIM_MASK,
BQ24190_REG_ISC_IINLIM_SHIFT,
bq24190_isc_iinlim_values,
ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit);
if (ret < 0)
return ret;
val->intval = iinlimit;
return 0;
}
static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi,
const union power_supply_propval *val)
{
return bq24190_set_field_val(bdi, BQ24190_REG_ISC,
BQ24190_REG_ISC_IINLIM_MASK,
BQ24190_REG_ISC_IINLIM_SHIFT,
bq24190_isc_iinlim_values,
ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval);
}
static int bq24190_charger_get_property(struct power_supply *psy,
enum power_supply_property psp, union power_supply_propval *val)
{
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
int ret;
dev_dbg(bdi->dev, "prop: %d\n", psp);
ret = pm_runtime_get_sync(bdi->dev);
if (ret < 0) {
pm_runtime_put_noidle(bdi->dev);
return ret;
}
switch (psp) {
case POWER_SUPPLY_PROP_CHARGE_TYPE:
ret = bq24190_charger_get_charge_type(bdi, val);
break;
case POWER_SUPPLY_PROP_HEALTH:
ret = bq24190_charger_get_health(bdi, val);
break;
case POWER_SUPPLY_PROP_ONLINE:
ret = bq24190_charger_get_online(bdi, val);
break;
case POWER_SUPPLY_PROP_STATUS:
ret = bq24190_charger_get_status(bdi, val);
break;
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
ret = bq24190_charger_get_temp_alert_max(bdi, val);
break;
case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
ret = bq24190_charger_get_precharge(bdi, val);
break;
case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
ret = bq24190_charger_get_charge_term(bdi, val);
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
ret = bq24190_charger_get_current(bdi, val);
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
val->intval = bdi->ichg_max;
ret = 0;
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
ret = bq24190_charger_get_voltage(bdi, val);
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
val->intval = bdi->vreg_max;
ret = 0;
break;
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
ret = bq24190_charger_get_iinlimit(bdi, val);
break;
case POWER_SUPPLY_PROP_SCOPE:
val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
ret = 0;
break;
case POWER_SUPPLY_PROP_MODEL_NAME:
val->strval = bdi->model_name;
ret = 0;
break;
case POWER_SUPPLY_PROP_MANUFACTURER:
val->strval = BQ24190_MANUFACTURER;
ret = 0;
break;
default:
ret = -ENODATA;
}
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
return ret;
}
static int bq24190_charger_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
int ret;
dev_dbg(bdi->dev, "prop: %d\n", psp);
ret = pm_runtime_get_sync(bdi->dev);
if (ret < 0) {
pm_runtime_put_noidle(bdi->dev);
return ret;
}
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
ret = bq24190_charger_set_online(bdi, val);
break;
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
ret = bq24190_charger_set_temp_alert_max(bdi, val);
break;
case POWER_SUPPLY_PROP_CHARGE_TYPE:
ret = bq24190_charger_set_charge_type(bdi, val);
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
ret = bq24190_charger_set_current(bdi, val);
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
ret = bq24190_charger_set_voltage(bdi, val);
break;
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
ret = bq24190_charger_set_iinlimit(bdi, val);
break;
default:
ret = -EINVAL;
}
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
return ret;
}
static int bq24190_charger_property_is_writeable(struct power_supply *psy,
enum power_supply_property psp)
{
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
case POWER_SUPPLY_PROP_CHARGE_TYPE:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
return 1;
default:
return 0;
}
}
static void bq24190_input_current_limit_work(struct work_struct *work)
{
struct bq24190_dev_info *bdi =
container_of(work, struct bq24190_dev_info,
input_current_limit_work.work);
union power_supply_propval val;
int ret;
ret = power_supply_get_property_from_supplier(bdi->charger,
POWER_SUPPLY_PROP_CURRENT_MAX,
&val);
if (ret)
return;
bq24190_charger_set_property(bdi->charger,
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
&val);
}
/* Sync the input-current-limit with our parent supply (if we have one) */
static void bq24190_charger_external_power_changed(struct power_supply *psy)
{
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
/*
* The Power-Good detection may take up to 220ms, sometimes
* the external charger detection is quicker, and the bq24190 will
* reset to iinlim based on its own charger detection (which is not
* hooked up when using external charger detection) resulting in a
* too low default 500mA iinlim. Delay setting the input-current-limit
* for 300ms to avoid this.
*/
queue_delayed_work(system_wq, &bdi->input_current_limit_work,
msecs_to_jiffies(300));
}
static enum power_supply_property bq24190_charger_properties[] = {
POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
POWER_SUPPLY_PROP_SCOPE,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_MANUFACTURER,
};
static char *bq24190_charger_supplied_to[] = {
"main-battery",
};
static const struct power_supply_desc bq24190_charger_desc = {
.name = "bq24190-charger",
.type = POWER_SUPPLY_TYPE_USB,
.properties = bq24190_charger_properties,
.num_properties = ARRAY_SIZE(bq24190_charger_properties),
.get_property = bq24190_charger_get_property,
.set_property = bq24190_charger_set_property,
.property_is_writeable = bq24190_charger_property_is_writeable,
.external_power_changed = bq24190_charger_external_power_changed,
};
/* Battery power supply property routines */
static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 ss_reg, chrg_fault;
int status, ret;
mutex_lock(&bdi->f_reg_lock);
chrg_fault = bdi->f_reg;
mutex_unlock(&bdi->f_reg_lock);
chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK;
chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
if (ret < 0)
return ret;
/*
* The battery must be discharging when any of these are true:
* - there is no good power source;
* - there is a charge fault.
* Could also be discharging when in "supplement mode" but
* there is no way to tell when its in that mode.
*/
if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) {
status = POWER_SUPPLY_STATUS_DISCHARGING;
} else {
ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK;
ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT;
switch (ss_reg) {
case 0x0: /* Not Charging */
status = POWER_SUPPLY_STATUS_NOT_CHARGING;
break;
case 0x1: /* Pre-charge */
case 0x2: /* Fast Charging */
status = POWER_SUPPLY_STATUS_CHARGING;
break;
case 0x3: /* Charge Termination Done */
status = POWER_SUPPLY_STATUS_FULL;
break;
default:
ret = -EIO;
}
}
if (!ret)
val->intval = status;
return ret;
}
static int bq24190_battery_get_health(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 v;
int health;
mutex_lock(&bdi->f_reg_lock);
v = bdi->f_reg;
mutex_unlock(&bdi->f_reg_lock);
if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
} else {
v &= BQ24190_REG_F_NTC_FAULT_MASK;
v >>= BQ24190_REG_F_NTC_FAULT_SHIFT;
switch (v) {
case 0x0: /* Normal */
health = POWER_SUPPLY_HEALTH_GOOD;
break;
case 0x1: /* TS1 Cold */
case 0x3: /* TS2 Cold */
case 0x5: /* Both Cold */
health = POWER_SUPPLY_HEALTH_COLD;
break;
case 0x2: /* TS1 Hot */
case 0x4: /* TS2 Hot */
case 0x6: /* Both Hot */
health = POWER_SUPPLY_HEALTH_OVERHEAT;
break;
default:
health = POWER_SUPPLY_HEALTH_UNKNOWN;
}
}
val->intval = health;
return 0;
}
static int bq24190_battery_get_online(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
u8 batfet_disable;
int ret;
ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
BQ24190_REG_MOC_BATFET_DISABLE_MASK,
BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
if (ret < 0)
return ret;
val->intval = !batfet_disable;
return 0;
}
static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
const union power_supply_propval *val)
{
return bq24190_write_mask(bdi, BQ24190_REG_MOC,
BQ24190_REG_MOC_BATFET_DISABLE_MASK,
BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval);
}
static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
union power_supply_propval *val)
{
int temp, ret;
ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC,
BQ24190_REG_ICTRC_TREG_MASK,
BQ24190_REG_ICTRC_TREG_SHIFT,
bq24190_ictrc_treg_values,
ARRAY_SIZE(bq24190_ictrc_treg_values), &temp);
if (ret < 0)
return ret;
val->intval = temp;
return 0;
}
static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
const union power_supply_propval *val)
{
return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC,
BQ24190_REG_ICTRC_TREG_MASK,
BQ24190_REG_ICTRC_TREG_SHIFT,
bq24190_ictrc_treg_values,
ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval);
}
static int bq24190_battery_get_property(struct power_supply *psy,
enum power_supply_property psp, union power_supply_propval *val)
{
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
int ret;
dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
dev_dbg(bdi->dev, "prop: %d\n", psp);
ret = pm_runtime_get_sync(bdi->dev);
if (ret < 0) {
pm_runtime_put_noidle(bdi->dev);
return ret;
}
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
ret = bq24190_battery_get_status(bdi, val);
break;
case POWER_SUPPLY_PROP_HEALTH:
ret = bq24190_battery_get_health(bdi, val);
break;
case POWER_SUPPLY_PROP_ONLINE:
ret = bq24190_battery_get_online(bdi, val);
break;
case POWER_SUPPLY_PROP_TECHNOLOGY:
/* Could be Li-on or Li-polymer but no way to tell which */
val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
ret = 0;
break;
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
ret = bq24190_battery_get_temp_alert_max(bdi, val);
break;
case POWER_SUPPLY_PROP_SCOPE:
val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
ret = 0;
break;
default:
ret = -ENODATA;
}
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
return ret;
}
static int bq24190_battery_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
int ret;
dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
dev_dbg(bdi->dev, "prop: %d\n", psp);
ret = pm_runtime_get_sync(bdi->dev);
if (ret < 0) {
pm_runtime_put_noidle(bdi->dev);
return ret;
}
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
ret = bq24190_battery_set_online(bdi, val);
break;
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
ret = bq24190_battery_set_temp_alert_max(bdi, val);
break;
default:
ret = -EINVAL;
}
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
return ret;
}
static int bq24190_battery_property_is_writeable(struct power_supply *psy,
enum power_supply_property psp)
{
int ret;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
ret = 1;
break;
default:
ret = 0;
}
return ret;
}
static enum power_supply_property bq24190_battery_properties[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
POWER_SUPPLY_PROP_SCOPE,
};
static const struct power_supply_desc bq24190_battery_desc = {
.name = "bq24190-battery",
.type = POWER_SUPPLY_TYPE_BATTERY,
.properties = bq24190_battery_properties,
.num_properties = ARRAY_SIZE(bq24190_battery_properties),
.get_property = bq24190_battery_get_property,
.set_property = bq24190_battery_set_property,
.property_is_writeable = bq24190_battery_property_is_writeable,
};
static int bq24190_configure_usb_otg(struct bq24190_dev_info *bdi, u8 ss_reg)
{
bool otg_enabled;
int ret;
otg_enabled = !!(ss_reg & BQ24190_REG_SS_VBUS_STAT_MASK);
ret = extcon_set_state_sync(bdi->edev, EXTCON_USB, otg_enabled);
if (ret < 0)
dev_err(bdi->dev, "Can't set extcon state to %d: %d\n",
otg_enabled, ret);
return ret;
}
static void bq24190_check_status(struct bq24190_dev_info *bdi)
{
const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK;
const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK
| BQ24190_REG_F_NTC_FAULT_MASK;
bool alert_charger = false, alert_battery = false;
u8 ss_reg = 0, f_reg = 0;
int i, ret;
ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
if (ret < 0) {
dev_err(bdi->dev, "Can't read SS reg: %d\n", ret);
return;
}
i = 0;
do {
ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
if (ret < 0) {
dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
return;
}
} while (f_reg && ++i < 2);
/* ignore over/under voltage fault after disconnect */
if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) &&
!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK))
f_reg = 0;
if (f_reg != bdi->f_reg) {
dev_warn(bdi->dev,
"Fault: boost %d, charge %d, battery %d, ntc %d\n",
!!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK),
!!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK),
!!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK),
!!(f_reg & BQ24190_REG_F_NTC_FAULT_MASK));
mutex_lock(&bdi->f_reg_lock);
if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f))
alert_battery = true;
if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f))
alert_charger = true;
bdi->f_reg = f_reg;
mutex_unlock(&bdi->f_reg_lock);
}
if (ss_reg != bdi->ss_reg) {
/*
* The device is in host mode so when PG_STAT goes from 1->0
* (i.e., power removed) HIZ needs to be disabled.
*/
if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
BQ24190_REG_ISC_EN_HIZ_MASK,
BQ24190_REG_ISC_EN_HIZ_SHIFT,
0);
if (ret < 0)
dev_err(bdi->dev, "Can't access ISC reg: %d\n",
ret);
}
if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
alert_battery = true;
if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
alert_charger = true;
bdi->ss_reg = ss_reg;
}
if (alert_charger || alert_battery) {
power_supply_changed(bdi->charger);
bq24190_configure_usb_otg(bdi, ss_reg);
}
if (alert_battery && bdi->battery)
power_supply_changed(bdi->battery);
dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg);
}
static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
{
struct bq24190_dev_info *bdi = data;
int error;
bdi->irq_event = true;
error = pm_runtime_get_sync(bdi->dev);
if (error < 0) {
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
pm_runtime_put_noidle(bdi->dev);
return IRQ_NONE;
}
bq24190_check_status(bdi);
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
bdi->irq_event = false;
return IRQ_HANDLED;
}
static int bq24190_hw_init(struct bq24190_dev_info *bdi)
{
u8 v;
int ret;
/* First check that the device really is what its supposed to be */
ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS,
BQ24190_REG_VPRS_PN_MASK,
BQ24190_REG_VPRS_PN_SHIFT,
&v);
if (ret < 0)
return ret;
switch (v) {
case BQ24190_REG_VPRS_PN_24190:
case BQ24190_REG_VPRS_PN_24192:
case BQ24190_REG_VPRS_PN_24192I:
break;
default:
dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v);
return -ENODEV;
}
ret = bq24190_register_reset(bdi);
if (ret < 0)
return ret;
ret = bq24190_set_config(bdi);
if (ret < 0)
return ret;
return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
}
static int bq24190_get_config(struct bq24190_dev_info *bdi)
{
const char * const s = "ti,system-minimum-microvolt";
struct power_supply_battery_info *info;
int v, idx;
idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1;
bdi->ichg_max = bq24190_ccc_ichg_values[idx];
idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1;
bdi->vreg_max = bq24190_cvc_vreg_values[idx];
if (device_property_read_u32(bdi->dev, s, &v) == 0) {
v /= 1000;
if (v >= BQ24190_REG_POC_SYS_MIN_MIN
&& v <= BQ24190_REG_POC_SYS_MIN_MAX)
bdi->sys_min = v;
else
dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v);
}
if (!power_supply_get_battery_info(bdi->charger, &info)) {
v = info->precharge_current_ua / 1000;
if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN
&& v <= BQ24190_REG_PCTCC_IPRECHG_MAX)
bdi->iprechg = v;
else
dev_warn(bdi->dev, "invalid value for battery:precharge-current-microamp: %d\n",
v);
v = info->charge_term_current_ua / 1000;
if (v >= BQ24190_REG_PCTCC_ITERM_MIN
&& v <= BQ24190_REG_PCTCC_ITERM_MAX)
bdi->iterm = v;
else
dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n",
v);
/* These are optional, so no warning when not set */
v = info->constant_charge_current_max_ua;
if (v >= bq24190_ccc_ichg_values[0] && v <= bdi->ichg_max)
bdi->ichg = bdi->ichg_max = v;
v = info->constant_charge_voltage_max_uv;
if (v >= bq24190_cvc_vreg_values[0] && v <= bdi->vreg_max)
bdi->vreg = bdi->vreg_max = v;
}
return 0;
}
static int bq24190_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
struct device *dev = &client->dev;
struct power_supply_config charger_cfg = {}, battery_cfg = {};
struct bq24190_dev_info *bdi;
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
return -ENODEV;
}
bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
if (!bdi) {
dev_err(dev, "Can't alloc bdi struct\n");
return -ENOMEM;
}
bdi->client = client;
bdi->dev = dev;
strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
mutex_init(&bdi->f_reg_lock);
bdi->charge_type = POWER_SUPPLY_CHARGE_TYPE_FAST;
bdi->f_reg = 0;
bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
INIT_DELAYED_WORK(&bdi->input_current_limit_work,
bq24190_input_current_limit_work);
i2c_set_clientdata(client, bdi);
if (client->irq <= 0) {
dev_err(dev, "Can't get irq info\n");
return -EINVAL;
}
bdi->edev = devm_extcon_dev_allocate(dev, bq24190_usb_extcon_cable);
if (IS_ERR(bdi->edev))
return PTR_ERR(bdi->edev);
ret = devm_extcon_dev_register(dev, bdi->edev);
if (ret < 0)
return ret;
pm_runtime_enable(dev);
pm_runtime_use_autosuspend(dev);
pm_runtime_set_autosuspend_delay(dev, 600);
ret = pm_runtime_get_sync(dev);
if (ret < 0) {
dev_err(dev, "pm_runtime_get failed: %i\n", ret);
goto out_pmrt;
}
#ifdef CONFIG_SYSFS
bq24190_sysfs_init_attrs();
charger_cfg.attr_grp = bq24190_sysfs_groups;
#endif
charger_cfg.drv_data = bdi;
charger_cfg.of_node = dev->of_node;
charger_cfg.supplied_to = bq24190_charger_supplied_to;
charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to);
bdi->charger = power_supply_register(dev, &bq24190_charger_desc,
&charger_cfg);
if (IS_ERR(bdi->charger)) {
dev_err(dev, "Can't register charger\n");
ret = PTR_ERR(bdi->charger);
goto out_pmrt;
}
/* the battery class is deprecated and will be removed. */
/* in the interim, this property hides it. */
if (!device_property_read_bool(dev, "omit-battery-class")) {
battery_cfg.drv_data = bdi;
bdi->battery = power_supply_register(dev, &bq24190_battery_desc,
&battery_cfg);
if (IS_ERR(bdi->battery)) {
dev_err(dev, "Can't register battery\n");
ret = PTR_ERR(bdi->battery);
goto out_charger;
}
}
ret = bq24190_get_config(bdi);
if (ret < 0) {
dev_err(dev, "Can't get devicetree config\n");
goto out_charger;
}
ret = bq24190_hw_init(bdi);
if (ret < 0) {
dev_err(dev, "Hardware init failed\n");
goto out_charger;
}
ret = bq24190_configure_usb_otg(bdi, bdi->ss_reg);
if (ret < 0)
goto out_charger;
bdi->initialized = true;
ret = devm_request_threaded_irq(dev, client->irq, NULL,
bq24190_irq_handler_thread,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"bq24190-charger", bdi);
if (ret < 0) {
dev_err(dev, "Can't set up irq handler\n");
goto out_charger;
}
ret = bq24190_register_vbus_regulator(bdi);
if (ret < 0)
goto out_charger;
enable_irq_wake(client->irq);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return 0;
out_charger:
if (!IS_ERR_OR_NULL(bdi->battery))
power_supply_unregister(bdi->battery);
power_supply_unregister(bdi->charger);
out_pmrt:
pm_runtime_put_sync(dev);
pm_runtime_dont_use_autosuspend(dev);
pm_runtime_disable(dev);
return ret;
}
static int bq24190_remove(struct i2c_client *client)
{
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
int error;
error = pm_runtime_get_sync(bdi->dev);
if (error < 0) {
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
pm_runtime_put_noidle(bdi->dev);
}
bq24190_register_reset(bdi);
if (bdi->battery)
power_supply_unregister(bdi->battery);
power_supply_unregister(bdi->charger);
if (error >= 0)
pm_runtime_put_sync(bdi->dev);
pm_runtime_dont_use_autosuspend(bdi->dev);
pm_runtime_disable(bdi->dev);
return 0;
}
static void bq24190_shutdown(struct i2c_client *client)
{
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
/* Turn off 5V boost regulator on shutdown */
bq24190_set_otg_vbus(bdi, false);
}
static __maybe_unused int bq24190_runtime_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
if (!bdi->initialized)
return 0;
dev_dbg(bdi->dev, "%s\n", __func__);
return 0;
}
static __maybe_unused int bq24190_runtime_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
if (!bdi->initialized)
return 0;
if (!bdi->irq_event) {
dev_dbg(bdi->dev, "checking events on possible wakeirq\n");
bq24190_check_status(bdi);
}
return 0;
}
static __maybe_unused int bq24190_pm_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
int error;
error = pm_runtime_get_sync(bdi->dev);
if (error < 0) {
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
pm_runtime_put_noidle(bdi->dev);
}
bq24190_register_reset(bdi);
if (error >= 0) {
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
}
return 0;
}
static __maybe_unused int bq24190_pm_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
int error;
bdi->f_reg = 0;
bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
error = pm_runtime_get_sync(bdi->dev);
if (error < 0) {
dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
pm_runtime_put_noidle(bdi->dev);
}
bq24190_register_reset(bdi);
bq24190_set_config(bdi);
bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
if (error >= 0) {
pm_runtime_mark_last_busy(bdi->dev);
pm_runtime_put_autosuspend(bdi->dev);
}
/* Things may have changed while suspended so alert upper layer */
power_supply_changed(bdi->charger);
if (bdi->battery)
power_supply_changed(bdi->battery);
return 0;
}
static const struct dev_pm_ops bq24190_pm_ops = {
SET_RUNTIME_PM_OPS(bq24190_runtime_suspend, bq24190_runtime_resume,
NULL)
SET_SYSTEM_SLEEP_PM_OPS(bq24190_pm_suspend, bq24190_pm_resume)
};
static const struct i2c_device_id bq24190_i2c_ids[] = {
{ "bq24190" },
{ "bq24192" },
{ "bq24192i" },
{ "bq24196" },
{ },
};
MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
static const struct of_device_id bq24190_of_match[] = {
{ .compatible = "ti,bq24190", },
{ .compatible = "ti,bq24192", },
{ .compatible = "ti,bq24192i", },
{ .compatible = "ti,bq24196", },
{ },
};
MODULE_DEVICE_TABLE(of, bq24190_of_match);
static struct i2c_driver bq24190_driver = {
.probe = bq24190_probe,
.remove = bq24190_remove,
.shutdown = bq24190_shutdown,
.id_table = bq24190_i2c_ids,
.driver = {
.name = "bq24190-charger",
.pm = &bq24190_pm_ops,
.of_match_table = bq24190_of_match,
},
};
module_i2c_driver(bq24190_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
MODULE_DESCRIPTION("TI BQ24190 Charger Driver");
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку