WSL2-Linux-Kernel/arch/arm/mach-kirkwood
Russell King fa142ff5b3 Watchdog: allow orion_wdt to be built for Dove
The watchdog infrastructure in Dove is no different from that in
Orion5x or Kirkwood, so let's enable it for Dove.  The only things
missing are a few register settings in Dove's bridge-regs.h.

Rather than duplicating the same register bit masks for the RSTOUTn_MASK
and BRIDGE_CAUSE registers, move the definitions into the watchdog
driver itself.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-07-11 22:17:56 +02:00
..
include/mach Watchdog: allow orion_wdt to be built for Dove 2013-07-11 22:17:56 +02:00
Kconfig ARM SoC board specific changes 2013-07-02 14:10:26 -07:00
Makefile ARM SoC board specific changes 2013-07-02 14:10:26 -07:00
Makefile.boot
board-db88f628x-bp.c arm: kirkwood: convert db-88f6281/db-88f6282 to the Device Tree 2013-05-27 16:02:13 +00:00
board-dnskw.c
board-dockstar.c
board-dreamplug.c arm: kirkwood: dreamplug: use Device Tree to probe SDIO 2013-02-28 18:57:10 +01:00
board-dt.c ARM SoC board specific changes 2013-07-02 14:10:26 -07:00
board-goflexnet.c
board-guruplug.c ARM: kirkwood: make use of DT mvsdio on guruplug board 2013-03-30 20:47:23 +00:00
board-ib62x0.c ARM: Kirkwood: Cleanup unneeded include files 2013-01-12 21:50:10 +00:00
board-iconnect.c arm: kirkwood: convert Iomega Iconnect to use DT for the PCIe interface 2013-05-27 16:02:11 +00:00
board-iomega_ix2_200.c Fix GE0/GE1 init on ix2-200 as GE0 has no PHY 2013-04-10 16:50:58 +00:00
board-km_kirkwood.c
board-lsxl.c ARM: Kirkwood: Convert LSXL to restart-poweroff driver. 2013-05-26 01:12:34 +00:00
board-mplcec4.c arm: kirkwood: convert MPL CEC4 to use DT for the PCIe interface 2013-05-27 16:02:12 +00:00
board-ns2.c ARM: Kirkwood: DT board setup for CloudBox 2013-04-10 18:16:06 +00:00
board-openblocks_a6.c ARM: Kirkwood: Convert openblocks A6 board to pinctrl 2013-02-28 18:57:11 +01:00
board-readynas.c arm: kirkwood: NETGEAR ReadyNAS Duo v2 init PCIe via DT 2013-05-29 11:45:24 +00:00
board-sheevaplug.c ARM: Kirkwood: add DT support for Sheevaplug and Sheevaplug eSATA 2013-05-15 00:33:18 +00:00
board-ts219.c Minor board changes for v3.11 merge window. These are 2013-06-20 21:37:55 +02:00
board-usi_topkick.c ARM: kirkwood: topkick: init mvsdio via DT 2013-02-28 18:57:16 +01:00
common.c reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
common.h reboot: arm: change reboot_mode to use enum reboot_mode 2013-07-09 10:33:29 -07:00
d2net_v2-setup.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
dockstar-setup.c Merge branch 'timer/cleanup' into late/mvebu2 2013-02-28 18:54:15 +01:00
guruplug-setup.c ARM: Kirkwood: fix unused mvsdio gpio pins 2013-03-28 16:56:31 +00:00
irq.c
lacie_v2-common.c
lacie_v2-common.h
mpp.c ARM: Kirkwood: handle mv88f6282 cpu in __kirkwood_variant(). 2013-06-06 18:16:04 +00:00
mpp.h
mv88f6281gtw_ge-setup.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
netspace_v2-setup.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
netxbig_v2-setup.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
openrd-setup.c ARM: Kirkwood: fix unused mvsdio gpio pins 2013-03-28 16:56:31 +00:00
pcie.c arm: kirkwood: move PCIe window init to legacy driver 2013-05-27 16:02:10 +00:00
rd88f6192-nas-setup.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
rd88f6281-setup.c ARM: Kirkwood: fix unused mvsdio gpio pins 2013-03-28 16:56:31 +00:00
sheevaplug-setup.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
t5325-setup.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
ts41x-setup.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
ts219-setup.c Kirkwood: Enable PCIe port 1 on QNAP TS-11x/TS-21x 2013-05-13 15:57:29 +00:00
tsx1x-common.c
tsx1x-common.h