383 строки
9.3 KiB
C
383 строки
9.3 KiB
C
/* SF16-FMI, SF16-FMP and SF16-FMD radio driver for Linux radio support
|
|
* heavily based on rtrack driver...
|
|
* (c) 1997 M. Kirkwood
|
|
* (c) 1998 Petr Vandrovec, vandrove@vc.cvut.cz
|
|
*
|
|
* Fitted to new interface by Alan Cox <alan@lxorguk.ukuu.org.uk>
|
|
* Made working and cleaned up functions <mikael.hedin@irf.se>
|
|
* Support for ISAPnP by Ladislav Michl <ladis@psi.cz>
|
|
*
|
|
* Notes on the hardware
|
|
*
|
|
* Frequency control is done digitally -- ie out(port,encodefreq(95.8));
|
|
* No volume control - only mute/unmute - you have to use line volume
|
|
* control on SB-part of SF16-FMI/SF16-FMP/SF16-FMD
|
|
*
|
|
* Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
|
|
*/
|
|
|
|
#include <linux/kernel.h> /* __setup */
|
|
#include <linux/module.h> /* Modules */
|
|
#include <linux/init.h> /* Initdata */
|
|
#include <linux/ioport.h> /* request_region */
|
|
#include <linux/delay.h> /* udelay */
|
|
#include <linux/isapnp.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/videodev2.h> /* kernel radio structs */
|
|
#include <linux/io.h> /* outb, outb_p */
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-event.h>
|
|
#include "lm7000.h"
|
|
|
|
MODULE_AUTHOR("Petr Vandrovec, vandrove@vc.cvut.cz and M. Kirkwood");
|
|
MODULE_DESCRIPTION("A driver for the SF16-FMI, SF16-FMP and SF16-FMD radio.");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION("0.0.3");
|
|
|
|
static int io = -1;
|
|
static int radio_nr = -1;
|
|
|
|
module_param(io, int, 0);
|
|
MODULE_PARM_DESC(io, "I/O address of the SF16-FMI/SF16-FMP/SF16-FMD card (0x284 or 0x384)");
|
|
module_param(radio_nr, int, 0);
|
|
|
|
struct fmi
|
|
{
|
|
struct v4l2_device v4l2_dev;
|
|
struct v4l2_ctrl_handler hdl;
|
|
struct video_device vdev;
|
|
int io;
|
|
bool mute;
|
|
u32 curfreq; /* freq in kHz */
|
|
struct mutex lock;
|
|
};
|
|
|
|
static struct fmi fmi_card;
|
|
static struct pnp_dev *dev;
|
|
static bool pnp_attached;
|
|
|
|
#define RSF16_MINFREQ (87U * 16000)
|
|
#define RSF16_MAXFREQ (108U * 16000)
|
|
|
|
#define FMI_BIT_TUN_CE (1 << 0)
|
|
#define FMI_BIT_TUN_CLK (1 << 1)
|
|
#define FMI_BIT_TUN_DATA (1 << 2)
|
|
#define FMI_BIT_VOL_SW (1 << 3)
|
|
#define FMI_BIT_TUN_STRQ (1 << 4)
|
|
|
|
static void fmi_set_pins(void *handle, u8 pins)
|
|
{
|
|
struct fmi *fmi = handle;
|
|
u8 bits = FMI_BIT_TUN_STRQ;
|
|
|
|
if (!fmi->mute)
|
|
bits |= FMI_BIT_VOL_SW;
|
|
|
|
if (pins & LM7000_DATA)
|
|
bits |= FMI_BIT_TUN_DATA;
|
|
if (pins & LM7000_CLK)
|
|
bits |= FMI_BIT_TUN_CLK;
|
|
if (pins & LM7000_CE)
|
|
bits |= FMI_BIT_TUN_CE;
|
|
|
|
mutex_lock(&fmi->lock);
|
|
outb_p(bits, fmi->io);
|
|
mutex_unlock(&fmi->lock);
|
|
}
|
|
|
|
static inline void fmi_mute(struct fmi *fmi)
|
|
{
|
|
mutex_lock(&fmi->lock);
|
|
outb(0x00, fmi->io);
|
|
mutex_unlock(&fmi->lock);
|
|
}
|
|
|
|
static inline void fmi_unmute(struct fmi *fmi)
|
|
{
|
|
mutex_lock(&fmi->lock);
|
|
outb(0x08, fmi->io);
|
|
mutex_unlock(&fmi->lock);
|
|
}
|
|
|
|
static inline int fmi_getsigstr(struct fmi *fmi)
|
|
{
|
|
int val;
|
|
int res;
|
|
|
|
mutex_lock(&fmi->lock);
|
|
val = fmi->mute ? 0x00 : 0x08; /* mute/unmute */
|
|
outb(val, fmi->io);
|
|
outb(val | 0x10, fmi->io);
|
|
msleep(143); /* was schedule_timeout(HZ/7) */
|
|
res = (int)inb(fmi->io + 1);
|
|
outb(val, fmi->io);
|
|
|
|
mutex_unlock(&fmi->lock);
|
|
return (res & 2) ? 0 : 0xFFFF;
|
|
}
|
|
|
|
static void fmi_set_freq(struct fmi *fmi)
|
|
{
|
|
fmi->curfreq = clamp(fmi->curfreq, RSF16_MINFREQ, RSF16_MAXFREQ);
|
|
/* rounding in steps of 800 to match the freq
|
|
that will be used */
|
|
lm7000_set_freq((fmi->curfreq / 800) * 800, fmi, fmi_set_pins);
|
|
}
|
|
|
|
static int vidioc_querycap(struct file *file, void *priv,
|
|
struct v4l2_capability *v)
|
|
{
|
|
strlcpy(v->driver, "radio-sf16fmi", sizeof(v->driver));
|
|
strlcpy(v->card, "SF16-FMI/FMP/FMD radio", sizeof(v->card));
|
|
strlcpy(v->bus_info, "ISA:radio-sf16fmi", sizeof(v->bus_info));
|
|
v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
|
|
v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS;
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_g_tuner(struct file *file, void *priv,
|
|
struct v4l2_tuner *v)
|
|
{
|
|
struct fmi *fmi = video_drvdata(file);
|
|
|
|
if (v->index > 0)
|
|
return -EINVAL;
|
|
|
|
strlcpy(v->name, "FM", sizeof(v->name));
|
|
v->type = V4L2_TUNER_RADIO;
|
|
v->rangelow = RSF16_MINFREQ;
|
|
v->rangehigh = RSF16_MAXFREQ;
|
|
v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
|
|
v->capability = V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LOW;
|
|
v->audmode = V4L2_TUNER_MODE_STEREO;
|
|
v->signal = fmi_getsigstr(fmi);
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_s_tuner(struct file *file, void *priv,
|
|
const struct v4l2_tuner *v)
|
|
{
|
|
return v->index ? -EINVAL : 0;
|
|
}
|
|
|
|
static int vidioc_s_frequency(struct file *file, void *priv,
|
|
const struct v4l2_frequency *f)
|
|
{
|
|
struct fmi *fmi = video_drvdata(file);
|
|
|
|
if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
|
|
return -EINVAL;
|
|
|
|
fmi->curfreq = f->frequency;
|
|
fmi_set_freq(fmi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vidioc_g_frequency(struct file *file, void *priv,
|
|
struct v4l2_frequency *f)
|
|
{
|
|
struct fmi *fmi = video_drvdata(file);
|
|
|
|
if (f->tuner != 0)
|
|
return -EINVAL;
|
|
f->type = V4L2_TUNER_RADIO;
|
|
f->frequency = fmi->curfreq;
|
|
return 0;
|
|
}
|
|
|
|
static int fmi_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct fmi *fmi = container_of(ctrl->handler, struct fmi, hdl);
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_AUDIO_MUTE:
|
|
if (ctrl->val)
|
|
fmi_mute(fmi);
|
|
else
|
|
fmi_unmute(fmi);
|
|
fmi->mute = ctrl->val;
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops fmi_ctrl_ops = {
|
|
.s_ctrl = fmi_s_ctrl,
|
|
};
|
|
|
|
static const struct v4l2_file_operations fmi_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = v4l2_fh_open,
|
|
.release = v4l2_fh_release,
|
|
.poll = v4l2_ctrl_poll,
|
|
.unlocked_ioctl = video_ioctl2,
|
|
};
|
|
|
|
static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
|
|
.vidioc_querycap = vidioc_querycap,
|
|
.vidioc_g_tuner = vidioc_g_tuner,
|
|
.vidioc_s_tuner = vidioc_s_tuner,
|
|
.vidioc_g_frequency = vidioc_g_frequency,
|
|
.vidioc_s_frequency = vidioc_s_frequency,
|
|
.vidioc_log_status = v4l2_ctrl_log_status,
|
|
.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
|
|
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
|
|
};
|
|
|
|
/* ladis: this is my card. does any other types exist? */
|
|
static struct isapnp_device_id id_table[] = {
|
|
/* SF16-FMI */
|
|
{ ISAPNP_ANY_ID, ISAPNP_ANY_ID,
|
|
ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad10), 0},
|
|
/* SF16-FMD */
|
|
{ ISAPNP_ANY_ID, ISAPNP_ANY_ID,
|
|
ISAPNP_VENDOR('M','F','R'), ISAPNP_FUNCTION(0xad12), 0},
|
|
{ ISAPNP_CARD_END, },
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(isapnp, id_table);
|
|
|
|
static int __init isapnp_fmi_probe(void)
|
|
{
|
|
int i = 0;
|
|
|
|
while (id_table[i].card_vendor != 0 && dev == NULL) {
|
|
dev = pnp_find_dev(NULL, id_table[i].vendor,
|
|
id_table[i].function, NULL);
|
|
i++;
|
|
}
|
|
|
|
if (!dev)
|
|
return -ENODEV;
|
|
if (pnp_device_attach(dev) < 0)
|
|
return -EAGAIN;
|
|
if (pnp_activate_dev(dev) < 0) {
|
|
printk(KERN_ERR "radio-sf16fmi: PnP configure failed (out of resources?)\n");
|
|
pnp_device_detach(dev);
|
|
return -ENOMEM;
|
|
}
|
|
if (!pnp_port_valid(dev, 0)) {
|
|
pnp_device_detach(dev);
|
|
return -ENODEV;
|
|
}
|
|
|
|
i = pnp_port_start(dev, 0);
|
|
printk(KERN_INFO "radio-sf16fmi: PnP reports card at %#x\n", i);
|
|
|
|
return i;
|
|
}
|
|
|
|
static int __init fmi_init(void)
|
|
{
|
|
struct fmi *fmi = &fmi_card;
|
|
struct v4l2_device *v4l2_dev = &fmi->v4l2_dev;
|
|
struct v4l2_ctrl_handler *hdl = &fmi->hdl;
|
|
int res, i;
|
|
int probe_ports[] = { 0, 0x284, 0x384 };
|
|
|
|
if (io < 0) {
|
|
for (i = 0; i < ARRAY_SIZE(probe_ports); i++) {
|
|
io = probe_ports[i];
|
|
if (io == 0) {
|
|
io = isapnp_fmi_probe();
|
|
if (io < 0)
|
|
continue;
|
|
pnp_attached = true;
|
|
}
|
|
if (!request_region(io, 2, "radio-sf16fmi")) {
|
|
if (pnp_attached)
|
|
pnp_device_detach(dev);
|
|
io = -1;
|
|
continue;
|
|
}
|
|
if (pnp_attached ||
|
|
((inb(io) & 0xf9) == 0xf9 && (inb(io) & 0x4) == 0))
|
|
break;
|
|
release_region(io, 2);
|
|
io = -1;
|
|
}
|
|
} else {
|
|
if (!request_region(io, 2, "radio-sf16fmi")) {
|
|
printk(KERN_ERR "radio-sf16fmi: port %#x already in use\n", io);
|
|
return -EBUSY;
|
|
}
|
|
if (inb(io) == 0xff) {
|
|
printk(KERN_ERR "radio-sf16fmi: card not present at %#x\n", io);
|
|
release_region(io, 2);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
if (io < 0) {
|
|
printk(KERN_ERR "radio-sf16fmi: no cards found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
strlcpy(v4l2_dev->name, "sf16fmi", sizeof(v4l2_dev->name));
|
|
fmi->io = io;
|
|
|
|
res = v4l2_device_register(NULL, v4l2_dev);
|
|
if (res < 0) {
|
|
release_region(fmi->io, 2);
|
|
if (pnp_attached)
|
|
pnp_device_detach(dev);
|
|
v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
|
|
return res;
|
|
}
|
|
|
|
v4l2_ctrl_handler_init(hdl, 1);
|
|
v4l2_ctrl_new_std(hdl, &fmi_ctrl_ops,
|
|
V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
|
|
v4l2_dev->ctrl_handler = hdl;
|
|
if (hdl->error) {
|
|
res = hdl->error;
|
|
v4l2_err(v4l2_dev, "Could not register controls\n");
|
|
v4l2_ctrl_handler_free(hdl);
|
|
v4l2_device_unregister(v4l2_dev);
|
|
return res;
|
|
}
|
|
|
|
strlcpy(fmi->vdev.name, v4l2_dev->name, sizeof(fmi->vdev.name));
|
|
fmi->vdev.v4l2_dev = v4l2_dev;
|
|
fmi->vdev.fops = &fmi_fops;
|
|
fmi->vdev.ioctl_ops = &fmi_ioctl_ops;
|
|
fmi->vdev.release = video_device_release_empty;
|
|
video_set_drvdata(&fmi->vdev, fmi);
|
|
|
|
mutex_init(&fmi->lock);
|
|
|
|
/* mute card and set default frequency */
|
|
fmi->mute = true;
|
|
fmi->curfreq = RSF16_MINFREQ;
|
|
fmi_set_freq(fmi);
|
|
|
|
if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
|
|
v4l2_ctrl_handler_free(hdl);
|
|
v4l2_device_unregister(v4l2_dev);
|
|
release_region(fmi->io, 2);
|
|
if (pnp_attached)
|
|
pnp_device_detach(dev);
|
|
return -EINVAL;
|
|
}
|
|
|
|
v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io);
|
|
return 0;
|
|
}
|
|
|
|
static void __exit fmi_exit(void)
|
|
{
|
|
struct fmi *fmi = &fmi_card;
|
|
|
|
v4l2_ctrl_handler_free(&fmi->hdl);
|
|
video_unregister_device(&fmi->vdev);
|
|
v4l2_device_unregister(&fmi->v4l2_dev);
|
|
release_region(fmi->io, 2);
|
|
if (dev && pnp_attached)
|
|
pnp_device_detach(dev);
|
|
}
|
|
|
|
module_init(fmi_init);
|
|
module_exit(fmi_exit);
|